From: Simon Glass Date: Tue, 18 Oct 2011 13:43:20 +0000 (+0000) Subject: Add board_pre_console_putc to deal with early console output X-Git-Tag: v2011.12-rc1~31 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=295d3942b806552503243f5cfb36aec6f1b5a9bf;p=oweals%2Fu-boot.git Add board_pre_console_putc to deal with early console output This patch adds support for console output before the console is inited. The main purpose of this is to deal with a very early panic() which would otherwise cause a silent hang. A new board_pre_console_putc() function is added to the board API. If provided by the board it will be called in the event of console output before the console is ready. This function should turn on all UARTs and spray the character out if it possibly can. The feature is controlled by a new CONFIG_PRE_CONSOLE_PUTC option. Signed-off-by: Simon Glass Acked-by: Graeme Russ --- diff --git a/README b/README index e9d189108f..ff72e4705f 100644 --- a/README +++ b/README @@ -638,6 +638,23 @@ The following options need to be configured: 'Sane' compilers will generate smaller code if CONFIG_PRE_CON_BUF_SZ is a power of 2 +- Pre-console putc(): + Prior to the console being initialised, console output is + normally silently discarded. This can be annoying if a + panic() happens in this time. + + If the CONFIG_PRE_CONSOLE_PUTC option is defined, then + U-Boot will call board_pre_console_putc() for each output + character in this case, This function should try to output + the character if possible, perhaps on all available UARTs + (it will need to do this directly, since the console code + is not functional yet). Note that if the panic happens + early enough, then it is possible that board_init_f() + (or even arch_cpu_init() on ARM) has not been called yet. + You should init all clocks, GPIOs, etc. that are needed + to get the character out. Baud rates will need to default + to something sensible. + - Boot Delay: CONFIG_BOOTDELAY - in seconds Delay before automatically booting the default image; set to -1 to disable autoboot. diff --git a/common/console.c b/common/console.c index f17875ead0..d34a0f4d87 100644 --- a/common/console.c +++ b/common/console.c @@ -329,14 +329,19 @@ int tstc(void) return serial_tstc(); } -#ifdef CONFIG_PRE_CONSOLE_BUFFER +#if defined(CONFIG_PRE_CONSOLE_BUFFER) || defined(CONFIG_PRE_CONSOLE_PUTC) #define CIRC_BUF_IDX(idx) ((idx) % (unsigned long)CONFIG_PRE_CON_BUF_SZ) static void pre_console_putc(const char c) { +#ifdef CONFIG_PRE_CONSOLE_BUFFER char *buffer = (char *)CONFIG_PRE_CON_BUF_ADDR; buffer[CIRC_BUF_IDX(gd->precon_buf_idx++)] = c; +#endif +#ifdef CONFIG_PRE_CONSOLE_PUTC + board_pre_console_putc(c); +#endif } static void pre_console_puts(const char *s) @@ -347,6 +352,7 @@ static void pre_console_puts(const char *s) static void print_pre_console_buffer(void) { +#ifdef CONFIG_PRE_CONSOLE_BUFFER unsigned long i = 0; char *buffer = (char *)CONFIG_PRE_CON_BUF_ADDR; @@ -355,7 +361,9 @@ static void print_pre_console_buffer(void) while (i < gd->precon_buf_idx) putc(buffer[CIRC_BUF_IDX(i++)]); +#endif } + #else static inline void pre_console_putc(const char c) {} static inline void pre_console_puts(const char *s) {} diff --git a/include/common.h b/include/common.h index 05a658cdf9..5cfdd762dc 100644 --- a/include/common.h +++ b/include/common.h @@ -285,6 +285,13 @@ extern ulong monitor_flash_len; int mac_read_from_eeprom(void); extern u8 _binary_dt_dtb_start[]; /* embedded device tree blob */ +/* + * Called when console output is requested before the console is available. + * The board should do its best to get the character out to the user any way + * it can. + */ +void board_pre_console_putc(int ch); + /* common/flash.c */ void flash_perror (int);