From: Vikas Manocha Date: Mon, 10 Apr 2017 22:02:59 +0000 (-0700) Subject: stm32f7: use stm32f7 gpio driver supporting driver model X-Git-Tag: v2017.07-rc1~440 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=280057bd7dd623420b2d8b383fe5bbe26820bc93;p=oweals%2Fu-boot.git stm32f7: use stm32f7 gpio driver supporting driver model With this gpio driver supporting DM, there is no need to enable clocks for different gpios (for pin muxing) in the board specific code. Need to increase the allocatable area required before relocation from 0x400 to 0xC00 becuase of 10 new gpio devices(& new gpio class) added in device tree. Signed-off-by: Vikas Manocha cc: Christophe KERELLO Reviewed-by: Simon Glass --- diff --git a/arch/arm/include/asm/arch-stm32f7/gpio.h b/arch/arm/include/asm/arch-stm32f7/gpio.h index 45999b4d2e..56e469e302 100644 --- a/arch/arm/include/asm/arch-stm32f7/gpio.h +++ b/arch/arm/include/asm/arch-stm32f7/gpio.h @@ -7,6 +7,7 @@ #ifndef _STM32_GPIO_H_ #define _STM32_GPIO_H_ +#include enum stm32_gpio_port { STM32_GPIO_PORT_A = 0, diff --git a/board/st/stm32f746-disco/stm32f746-disco.c b/board/st/stm32f746-disco/stm32f746-disco.c index 370db15bea..45a2c47aa2 100644 --- a/board/st/stm32f746-disco/stm32f746-disco.c +++ b/board/st/stm32f746-disco/stm32f746-disco.c @@ -20,37 +20,12 @@ DECLARE_GLOBAL_DATA_PTR; -const struct stm32_gpio_ctl gpio_ctl_gpout = { - .mode = STM32_GPIO_MODE_OUT, - .otype = STM32_GPIO_OTYPE_PP, - .speed = STM32_GPIO_SPEED_50M, - .pupd = STM32_GPIO_PUPD_NO, - .af = STM32_GPIO_AF0 -}; - -static int fmc_setup_gpio(void) -{ - clock_setup(GPIO_B_CLOCK_CFG); - clock_setup(GPIO_C_CLOCK_CFG); - clock_setup(GPIO_D_CLOCK_CFG); - clock_setup(GPIO_E_CLOCK_CFG); - clock_setup(GPIO_F_CLOCK_CFG); - clock_setup(GPIO_G_CLOCK_CFG); - clock_setup(GPIO_H_CLOCK_CFG); - - return 0; -} - int dram_init(void) { struct udevice *dev; struct ram_info ram; int rv; - rv = fmc_setup_gpio(); - if (rv) - return rv; - rv = uclass_get_device(UCLASS_RAM, 0, &dev); if (rv) { debug("DRAM init failed: %d\n", rv); @@ -73,37 +48,21 @@ int dram_init(void) return rv; } -int uart_setup_gpio(void) -{ - clock_setup(GPIO_A_CLOCK_CFG); - clock_setup(GPIO_B_CLOCK_CFG); - return 0; -} - #ifdef CONFIG_ETH_DESIGNWARE - static int stmmac_setup(void) { clock_setup(SYSCFG_CLOCK_CFG); /* Set >RMII mode */ STM32_SYSCFG->pmc |= SYSCFG_PMC_MII_RMII_SEL; - - clock_setup(GPIO_A_CLOCK_CFG); - clock_setup(GPIO_C_CLOCK_CFG); - clock_setup(GPIO_G_CLOCK_CFG); clock_setup(STMMAC_CLOCK_CFG); return 0; } -#endif -#ifdef CONFIG_STM32_QSPI - -static int qspi_setup(void) +int board_early_init_f(void) { - clock_setup(GPIO_B_CLOCK_CFG); - clock_setup(GPIO_D_CLOCK_CFG); - clock_setup(GPIO_E_CLOCK_CFG); + stmmac_setup(); + return 0; } #endif @@ -113,29 +72,6 @@ u32 get_board_rev(void) return 0; } -int board_early_init_f(void) -{ - int res; - - res = uart_setup_gpio(); - if (res) - return res; - -#ifdef CONFIG_ETH_DESIGNWARE - res = stmmac_setup(); - if (res) - return res; -#endif - -#ifdef CONFIG_STM32_QSPI - res = qspi_setup(); - if (res) - return res; -#endif - - return 0; -} - int board_init(void) { gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; diff --git a/configs/stm32f746-disco_defconfig b/configs/stm32f746-disco_defconfig index 57a0d610df..4322aad14d 100644 --- a/configs/stm32f746-disco_defconfig +++ b/configs/stm32f746-disco_defconfig @@ -24,6 +24,7 @@ CONFIG_CMD_DNS=y CONFIG_CMD_LINK_LOCAL=y CONFIG_CMD_TIMER=y CONFIG_OF_CONTROL=y +CONFIG_DM_SEQ_ALIAS=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_NETCONSOLE=y CONFIG_CLK=y @@ -49,3 +50,6 @@ CONFIG_PINCTRL=y CONFIG_PINCTRL_STM32=y CONFIG_RAM=y CONFIG_STM32_SDRAM=y +CONFIG_DM_GPIO=y +CONFIG_STM32F7_GPIO=y +CONFIG_SYS_MALLOC_F_LEN=0xC00 diff --git a/drivers/clk/clk_stm32f7.c b/drivers/clk/clk_stm32f7.c index 0d86395d47..da3c204ff5 100644 --- a/drivers/clk/clk_stm32f7.c +++ b/drivers/clk/clk_stm32f7.c @@ -228,56 +228,17 @@ static int stm32_clk_enable(struct clk *clk) void clock_setup(int peripheral) { switch (peripheral) { - case GPIO_A_CLOCK_CFG: - setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_GPIO_A_EN); - break; - case GPIO_B_CLOCK_CFG: - setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_GPIO_B_EN); - break; - case GPIO_C_CLOCK_CFG: - setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_GPIO_C_EN); - break; - case GPIO_D_CLOCK_CFG: - setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_GPIO_D_EN); - break; - case GPIO_E_CLOCK_CFG: - setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_GPIO_E_EN); - break; - case GPIO_F_CLOCK_CFG: - setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_GPIO_F_EN); - break; - case GPIO_G_CLOCK_CFG: - setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_GPIO_G_EN); - break; - case GPIO_H_CLOCK_CFG: - setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_GPIO_H_EN); - break; - case GPIO_I_CLOCK_CFG: - setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_GPIO_I_EN); - break; - case GPIO_J_CLOCK_CFG: - setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_GPIO_J_EN); - break; - case GPIO_K_CLOCK_CFG: - setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_GPIO_K_EN); - break; case SYSCFG_CLOCK_CFG: setbits_le32(&STM32_RCC->apb2enr, RCC_APB2ENR_SYSCFGEN); break; case TIMER2_CLOCK_CFG: setbits_le32(&STM32_RCC->apb1enr, RCC_APB1ENR_TIM2EN); break; - case FMC_CLOCK_CFG: - setbits_le32(&STM32_RCC->ahb3enr, RCC_AHB3ENR_FMC_EN); - break; case STMMAC_CLOCK_CFG: setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_ETHMAC_EN); setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_ETHMAC_RX_EN); setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_ETHMAC_TX_EN); break; - case QSPI_CLOCK_CFG: - setbits_le32(&STM32_RCC->ahb3enr, RCC_AHB3ENR_QSPI_EN); - break; default: break; } diff --git a/drivers/pinctrl/pinctrl_stm32.c b/drivers/pinctrl/pinctrl_stm32.c index 0e74d051c3..01f0429a39 100644 --- a/drivers/pinctrl/pinctrl_stm32.c +++ b/drivers/pinctrl/pinctrl_stm32.c @@ -121,11 +121,16 @@ static int stm32_pinctrl_set_state_simple(struct udevice *dev, if (len < 0) return -EINVAL; for (i = 0; i < len; i++) { + struct gpio_desc desc; debug("%s: pinmux = %x\n", __func__, *(pin_mux + i)); prep_gpio_dsc(&gpio_dsc, *(pin_mux + i)); prep_gpio_ctl(&gpio_ctl, *(pin_mux + i), args.node); - - rv = stm32_gpio_config(&gpio_dsc, &gpio_ctl); + rv = uclass_get_device_by_seq(UCLASS_GPIO, + gpio_dsc.port, &desc.dev); + if (rv) + return rv; + desc.offset = gpio_dsc.pin; + rv = stm32_gpio_config(&desc, &gpio_ctl); debug("%s: rv = %d\n\n", __func__, rv); if (rv) return rv; diff --git a/include/configs/stm32f746-disco.h b/include/configs/stm32f746-disco.h index de3d661d60..e917ba9162 100644 --- a/include/configs/stm32f746-disco.h +++ b/include/configs/stm32f746-disco.h @@ -30,7 +30,6 @@ #define CONFIG_ENV_IS_NOWHERE #define CONFIG_ENV_SIZE (8 << 10) -#define CONFIG_STM32_GPIO #define CONFIG_STM32_FLASH #define CONFIG_STM32X7_SERIAL