From: Tom Rini Date: Tue, 17 Mar 2020 15:59:58 +0000 (-0400) Subject: Merge tag 'ti-v2020.07-next' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti... X-Git-Tag: v2020.07-rc1~41^2~7 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=2738f0edea7d19960d692284d1f378b1a2b4c4a5;p=oweals%2Fu-boot.git Merge tag 'ti-v2020.07-next' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti into next K3 J721E: * OSPI boot support * Support for loading remote cores in R5 SPL * PMIC ESM Support * Minor fixes for R5F and C7x remoteproc drivers K3 AM654: * Update AVS class 0 voltages. * Add I2C nodes DRA7xx/AM57xx: * Fixed Android boot on AM57xx AM33/AM43/Davinci: * switch to driver model for the net and mdio driver for baltos * Add DM/DTS support for omap video driver * Enable fastboot on am335x-evm --- 2738f0edea7d19960d692284d1f378b1a2b4c4a5 diff --cc arch/arm/mach-k3/am6_init.c index d0b10e58ad,0f739818f6..3768bccafa --- a/arch/arm/mach-k3/am6_init.c +++ b/arch/arm/mach-k3/am6_init.c @@@ -161,15 -133,10 +161,13 @@@ void board_init_f(ulong dummy pinctrl_select_state(dev, "default"); /* - * Load, start up, and configure system controller firmware. Provide - * the U-Boot console init function to the SYSFW post-PM configuration - * callback hook, effectively switching on (or over) the console - * output. + * Load, start up, and configure system controller firmware while + * also populating the SYSFW post-PM configuration callback hook. */ - k3_sysfw_loader(preloader_console_init); + k3_sysfw_loader(k3_mmc_stop_clock, k3_mmc_restart_clock); + + /* Prepare console output */ + preloader_console_init(); /* Disable ROM configured firewalls right after loading sysfw */ #ifdef CONFIG_TI_SECURE_DEVICE diff --cc arch/arm/mach-k3/j721e_init.c index 0994522f6c,511cfd2fab..f34090f9cc --- a/arch/arm/mach-k3/j721e_init.c +++ b/arch/arm/mach-k3/j721e_init.c @@@ -18,7 -18,7 +18,8 @@@ #include #include #include +#include + #include #ifdef CONFIG_SPL_BUILD #ifdef CONFIG_K3_LOAD_SYSFW diff --cc arch/arm/mach-k3/sysfw-loader.c index db02607b17,0229491493..4f5c848245 --- a/arch/arm/mach-k3/sysfw-loader.c +++ b/arch/arm/mach-k3/sysfw-loader.c @@@ -197,8 -199,27 +199,28 @@@ exit } #endif + #if CONFIG_IS_ENABLED(SPI_LOAD) + static void *k3_sysfw_get_spi_addr(void) + { + struct udevice *dev; + fdt_addr_t addr; + int ret; + + ret = uclass_find_device_by_seq(UCLASS_SPI, CONFIG_SF_DEFAULT_BUS, + true, &dev); + if (ret) + return NULL; + + addr = dev_read_addr_index(dev, 1); + if (addr == FDT_ADDR_T_NONE) + return NULL; + + return (void *)(addr + CONFIG_K3_SYSFW_IMAGE_SPI_OFFS); + } + #endif + -void k3_sysfw_loader(void (*config_pm_done_callback)(void)) +void k3_sysfw_loader(void (*config_pm_pre_callback) (void), + void (*config_pm_done_callback)(void)) { struct spl_image_info spl_image = { 0 }; struct spl_boot_device bootdev = { 0 }; diff --cc configs/am65x_evm_a53_defconfig index df7723b71e,f175d20a66..542bbd992c --- a/configs/am65x_evm_a53_defconfig +++ b/configs/am65x_evm_a53_defconfig @@@ -13,9 -13,10 +13,11 @@@ CONFIG_SPL_SERIAL_SUPPORT= CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_NR_DRAM_BANKS=2 +CONFIG_ENV_OFFSET_REDUND=0x6A0000 CONFIG_SPL_FS_FAT=y CONFIG_SPL_LIBDISK_SUPPORT=y + CONFIG_SPL_SPI_FLASH_SUPPORT=y + CONFIG_SPL_SPI_SUPPORT=y # CONFIG_PSCI_RESET is not set CONFIG_SPL_TEXT_BASE=0x80080000 CONFIG_DISTRO_DEFAULTS=y diff --cc configs/j721e_evm_a72_defconfig index b27f9ba27b,116159d816..e9e82bb430 --- a/configs/j721e_evm_a72_defconfig +++ b/configs/j721e_evm_a72_defconfig @@@ -29,8 -28,7 +29,9 @@@ CONFIG_SPL_BOARD_INIT= CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400 + CONFIG_SPL_DMA=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_DM_MAILBOX=y diff --cc configs/j721e_evm_r5_defconfig index ea70c34c5a,bdbcf4ce41..917f82d4b5 --- a/configs/j721e_evm_r5_defconfig +++ b/configs/j721e_evm_r5_defconfig @@@ -27,9 -25,9 +26,11 @@@ CONFIG_USE_BOOTCOMMAND= CONFIG_SPL_STACK_R=y CONFIG_SPL_SEPARATE_BSS=y CONFIG_SPL_EARLY_BSS=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400 + CONFIG_SPL_DMA=y CONFIG_SPL_ENV_SUPPORT=y + CONFIG_SPL_FS_EXT4=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_DM_MAILBOX=y CONFIG_SPL_DM_RESET=y