From: Luka Perkov Date: Sun, 29 Jun 2014 23:29:57 +0000 (+0000) Subject: mvebu: drop 3.10 support X-Git-Tag: reboot~6736 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=26b06940a9bd894c1a21d76b160a3daea0843417;p=oweals%2Fopenwrt.git mvebu: drop 3.10 support Signed-off-by: Luka Perkov SVN-Revision: 41406 --- diff --git a/target/linux/mvebu/config-3.10 b/target/linux/mvebu/config-3.10 deleted file mode 100644 index 4f41f714b0..0000000000 --- a/target/linux/mvebu/config-3.10 +++ /dev/null @@ -1,272 +0,0 @@ -CONFIG_ALIGNMENT_TRAP=y -# CONFIG_ARCH_BCM is not set -CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y -CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y -CONFIG_ARCH_HAS_TICK_BROADCAST=y -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y -CONFIG_ARCH_MULTIPLATFORM=y -# CONFIG_ARCH_MULTI_CPU_AUTO is not set -# CONFIG_ARCH_MULTI_V6 is not set -CONFIG_ARCH_MULTI_V6_V7=y -CONFIG_ARCH_MULTI_V7=y -CONFIG_ARCH_MVEBU=y -# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set -CONFIG_ARCH_NR_GPIO=0 -CONFIG_ARCH_REQUIRE_GPIOLIB=y -# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set -# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set -# CONFIG_ARCH_SUNXI is not set -CONFIG_ARCH_SUSPEND_POSSIBLE=y -# CONFIG_ARCH_VIRT is not set -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -# CONFIG_ARCH_WM8850 is not set -CONFIG_ARM=y -CONFIG_ARMADA_370_XP_TIMER=y -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ATAG_DTB_COMPAT=y -# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set -CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y -# CONFIG_ARM_CPU_SUSPEND is not set -CONFIG_ARM_L1_CACHE_SHIFT=6 -CONFIG_ARM_L1_CACHE_SHIFT_6=y -# CONFIG_ARM_LPAE is not set -CONFIG_ARM_NR_BANKS=8 -CONFIG_ARM_PATCH_PHYS_VIRT=y -CONFIG_ARM_THUMB=y -# CONFIG_ARM_THUMBEE is not set -CONFIG_ARM_VIRT_EXT=y -CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y -CONFIG_ATAGS=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_BOUNCE=y -CONFIG_CACHE_L2X0=y -CONFIG_CACHE_PL310=y -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLKSRC_MMIO=y -CONFIG_CLKSRC_OF=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_COMMON_CLK=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_32v7=y -CONFIG_CPU_ABRT_EV7=y -# CONFIG_CPU_BPREDICT_DISABLE is not set -CONFIG_CPU_CACHE_V7=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_CPU_HAS_ASID=y -# CONFIG_CPU_ICACHE_DISABLE is not set -CONFIG_CPU_PABRT_V7=y -CONFIG_CPU_PJ4B=y -CONFIG_CPU_RMAP=y -CONFIG_CPU_TLB_V7=y -CONFIG_CPU_V7=y -CONFIG_CRC16=y -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_LL=y -CONFIG_DEBUG_LL_INCLUDE="debug/mvebu.S" -CONFIG_DEBUG_MVEBU_UART=y -# CONFIG_DEBUG_MVEBU_UART_ALTERNATE is not set -# CONFIG_DEBUG_PINCTRL is not set -CONFIG_DEBUG_UNCOMPRESS=y -CONFIG_DEBUG_USER=y -CONFIG_DMADEVICES=y -CONFIG_DMA_ENGINE=y -CONFIG_DMA_OF=y -CONFIG_DTC=y -CONFIG_EARLY_PRINTK=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -CONFIG_FAT_FS=y -CONFIG_FRAME_POINTER=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IO=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_DEVRES=y -CONFIG_GPIO_GENERIC=y -CONFIG_GPIO_MVEBU=y -CONFIG_GPIO_SYSFS=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_PFN_VALID=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set -CONFIG_HAVE_BPF_JIT=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_ATTRS=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_GENERIC_HARDIRQS=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_KERNEL_GZIP=y -CONFIG_HAVE_KERNEL_LZMA=y -CONFIG_HAVE_KERNEL_LZO=y -CONFIG_HAVE_KERNEL_XZ=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_PROC_CPU=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_SMP=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_UID16=y -CONFIG_HIGHMEM=y -# CONFIG_HIGHPTE is not set -CONFIG_HZ_PERIODIC=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_DEBUG=y -CONFIG_IRQ_WORK=y -CONFIG_ISO9660_FS=y -CONFIG_JBD=y -CONFIG_KTIME_SCALAR=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LOCAL_TIMERS=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_M25PXX_USE_FAST_READ=y -CONFIG_MACH_ARMADA_370=y -CONFIG_MACH_ARMADA_370_XP=y -CONFIG_MACH_ARMADA_XP=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_MARVELL_PHY=y -CONFIG_MDIO_BOARDINFO=y -CONFIG_MEMORY=y -CONFIG_MIGHT_HAVE_PCI=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MSDOS_FS=y -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_M25P80=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_NAND_PXA3xx=y -CONFIG_MTD_OF_PARTS=y -CONFIG_MTD_PHYSMAP_OF=y -# CONFIG_MTD_SM_COMMON is not set -CONFIG_MULTI_IRQ_HANDLER=y -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_MVEBU_CLK_CORE=y -CONFIG_MVEBU_CLK_COREDIV=y -CONFIG_MVEBU_CLK_CPU=y -CONFIG_MVEBU_CLK_GATING=y -CONFIG_MVEBU_DEVBUS=y -CONFIG_MVEBU_MBUS=y -CONFIG_MVMDIO=y -CONFIG_MVNETA=y -CONFIG_MV_XOR=y -CONFIG_NEED_DMA_MAP_STATE=y -# CONFIG_NEON is not set -CONFIG_NLS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=y -CONFIG_NLS_UTF8=y -CONFIG_NR_CPUS=4 -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_DEVICE=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_MDIO=y -CONFIG_OF_MTD=y -CONFIG_OF_NET=y -CONFIG_OF_PCI=y -CONFIG_OF_PCI_IRQ=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_OUTER_CACHE=y -CONFIG_OUTER_CACHE_SYNC=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_PCI=y -CONFIG_PCI_MSI=y -CONFIG_PCI_MVEBU=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PHYLIB=y -CONFIG_PINCONF=y -CONFIG_PINCTRL=y -CONFIG_PINCTRL_ARMADA_370=y -CONFIG_PINCTRL_ARMADA_XP=y -CONFIG_PINCTRL_MVEBU=y -# CONFIG_PINCTRL_SINGLE is not set -CONFIG_PINMUX=y -CONFIG_PJ4B_ERRATA_4742=y -# CONFIG_PL310_ERRATA_588369 is not set -# CONFIG_PL310_ERRATA_727915 is not set -# CONFIG_PL310_ERRATA_753970 is not set -# CONFIG_PL310_ERRATA_769419 is not set -CONFIG_PLAT_ORION=y -# CONFIG_PREEMPT_RCU is not set -CONFIG_PROC_DEVICETREE=y -CONFIG_RCU_STALL_COMMON=y -CONFIG_RFS_ACCEL=y -CONFIG_RPS=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_DRV_MV is not set -CONFIG_SCHED_HRTICK=y -# CONFIG_SCSI_DMA is not set -CONFIG_SERIAL_8250_DW=y -CONFIG_SMP=y -CONFIG_SMP_ON_UP=y -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_ORION=y -CONFIG_STOP_MACHINE=y -# CONFIG_SWP_EMULATE is not set -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -# CONFIG_TEGRA_HOST1X is not set -# CONFIG_THUMB2_KERNEL is not set -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_STATS=y -CONFIG_TREE_RCU=y -CONFIG_UID16=y -CONFIG_UIDGID_CONVERTED=y -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_USB_ARCH_HAS_XHCI=y -CONFIG_USB_SUPPORT=y -CONFIG_USE_GENERIC_SMP_HELPERS=y -CONFIG_USE_OF=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_VFAT_FS=y -CONFIG_VFP=y -CONFIG_VFPv3=y -# CONFIG_XEN is not set -CONFIG_XPS=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/mvebu/patches-3.10/0001-ARM-mvebu-Add-support-for-USB-storage-class-in-mvebu.patch b/target/linux/mvebu/patches-3.10/0001-ARM-mvebu-Add-support-for-USB-storage-class-in-mvebu.patch deleted file mode 100644 index 7ffc403601..0000000000 --- a/target/linux/mvebu/patches-3.10/0001-ARM-mvebu-Add-support-for-USB-storage-class-in-mvebu.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 6c52eba54044791592aefd139bdc2a7b6127e981 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Wed, 17 Apr 2013 16:51:34 -0300 -Subject: [PATCH 001/203] ARM: mvebu: Add support for USB storage class in - mvebu_defconfig - -Some boards can have built-in USB storage class controllers so -it's better to have this option included by default. - -Currently this option is needed to support built-in USB MMC controller -found in Globalscale Mirabox board. - -Signed-off-by: Ezequiel Garcia -Signed-off-by: Jason Cooper ---- - arch/arm/configs/mvebu_defconfig | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm/configs/mvebu_defconfig -+++ b/arch/arm/configs/mvebu_defconfig -@@ -60,6 +60,7 @@ CONFIG_USB_SUPPORT=y - CONFIG_USB=y - CONFIG_USB_EHCI_HCD=y - CONFIG_USB_EHCI_ROOT_HUB_TT=y -+CONFIG_USB_STORAGE=y - CONFIG_MMC=y - CONFIG_MMC_MVSDIO=y - CONFIG_NEW_LEDS=y diff --git a/target/linux/mvebu/patches-3.10/0002-ARM-mvebu-Use-standard-MMC-binding-for-all-users-of-.patch b/target/linux/mvebu/patches-3.10/0002-ARM-mvebu-Use-standard-MMC-binding-for-all-users-of-.patch deleted file mode 100644 index 536009c7b2..0000000000 --- a/target/linux/mvebu/patches-3.10/0002-ARM-mvebu-Use-standard-MMC-binding-for-all-users-of-.patch +++ /dev/null @@ -1,133 +0,0 @@ -From cf6eb4599d60cb9fa81465aa018c71d11e19ea6a Mon Sep 17 00:00:00 2001 -From: Simon Baatz -Date: Mon, 13 May 2013 23:18:58 +0200 -Subject: [PATCH 002/203] ARM: mvebu: Use standard MMC binding for all users of - mvsdio - -In order to prepare the switch to the standard MMC device tree parser -for mvsdio, adapt all current uses of mvsdio in the dts files to the -standard format. - -Signed-off-by: Simon Baatz -Signed-off-by: Jason Cooper ---- - arch/arm/boot/dts/armada-370-db.dts | 1 + - arch/arm/boot/dts/armada-370-mirabox.dts | 1 + - arch/arm/boot/dts/armada-370-rd.dts | 1 + - arch/arm/boot/dts/armada-370-xp.dtsi | 4 ++++ - arch/arm/boot/dts/armada-xp-db.dts | 1 + - arch/arm/boot/dts/kirkwood-dreamplug.dts | 1 + - arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts | 2 ++ - arch/arm/boot/dts/kirkwood-mplcec4.dts | 2 +- - arch/arm/boot/dts/kirkwood-topkick.dts | 1 + - arch/arm/boot/dts/kirkwood.dtsi | 4 ++++ - 10 files changed, 17 insertions(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/armada-370-db.dts -+++ b/arch/arm/boot/dts/armada-370-db.dts -@@ -74,6 +74,7 @@ - */ - status = "disabled"; - /* No CD or WP GPIOs */ -+ broken-cd; - }; - - usb@50000 { ---- a/arch/arm/boot/dts/armada-370-mirabox.dts -+++ b/arch/arm/boot/dts/armada-370-mirabox.dts -@@ -99,6 +99,7 @@ - * No CD or WP GPIOs: SDIO interface used for - * Wifi/Bluetooth chip - */ -+ broken-cd; - }; - - usb@50000 { ---- a/arch/arm/boot/dts/armada-370-rd.dts -+++ b/arch/arm/boot/dts/armada-370-rd.dts -@@ -64,6 +64,7 @@ - pinctrl-names = "default"; - status = "okay"; - /* No CD or WP GPIOs */ -+ broken-cd; - }; - - usb@50000 { ---- a/arch/arm/boot/dts/armada-370-xp.dtsi -+++ b/arch/arm/boot/dts/armada-370-xp.dtsi -@@ -143,6 +143,10 @@ - reg = <0xd4000 0x200>; - interrupts = <54>; - clocks = <&gateclk 17>; -+ bus-width = <4>; -+ cap-sdio-irq; -+ cap-sd-highspeed; -+ cap-mmc-highspeed; - status = "disabled"; - }; - ---- a/arch/arm/boot/dts/armada-xp-db.dts -+++ b/arch/arm/boot/dts/armada-xp-db.dts -@@ -97,6 +97,7 @@ - pinctrl-names = "default"; - status = "okay"; - /* No CD or WP GPIOs */ -+ broken-cd; - }; - - usb@50000 { ---- a/arch/arm/boot/dts/kirkwood-dreamplug.dts -+++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts -@@ -79,6 +79,7 @@ - pinctrl-names = "default"; - status = "okay"; - /* No CD or WP GPIOs */ -+ broken-cd; - }; - }; - ---- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts -+++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts -@@ -72,6 +72,8 @@ - - mvsdio@90000 { - status = "okay"; -+ /* No CD or WP GPIOs */ -+ broken-cd; - }; - }; - ---- a/arch/arm/boot/dts/kirkwood-mplcec4.dts -+++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts -@@ -136,7 +136,7 @@ - pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>; - pinctrl-names = "default"; - status = "okay"; -- cd-gpios = <&gpio1 15 0>; -+ cd-gpios = <&gpio1 15 1>; - /* No WP GPIO */ - }; - }; ---- a/arch/arm/boot/dts/kirkwood-topkick.dts -+++ b/arch/arm/boot/dts/kirkwood-topkick.dts -@@ -154,6 +154,7 @@ - pinctrl-names = "default"; - status = "okay"; - /* No CD or WP GPIOs */ -+ broken-cd; - }; - }; - ---- a/arch/arm/boot/dts/kirkwood.dtsi -+++ b/arch/arm/boot/dts/kirkwood.dtsi -@@ -200,6 +200,10 @@ - reg = <0x90000 0x200>; - interrupts = <28>; - clocks = <&gate_clk 4>; -+ bus-width = <4>; -+ cap-sdio-irq; -+ cap-sd-highspeed; -+ cap-mmc-highspeed; - status = "disabled"; - }; - }; diff --git a/target/linux/mvebu/patches-3.10/0003-ARM-mvebu-Add-support-for-NOR-flash-device-on-Armada.patch b/target/linux/mvebu/patches-3.10/0003-ARM-mvebu-Add-support-for-NOR-flash-device-on-Armada.patch deleted file mode 100644 index 22f8ad0124..0000000000 --- a/target/linux/mvebu/patches-3.10/0003-ARM-mvebu-Add-support-for-NOR-flash-device-on-Armada.patch +++ /dev/null @@ -1,71 +0,0 @@ -From 74cd8c09ae416261d7595021fc8062836dc750a2 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Fri, 17 May 2013 08:09:58 -0300 -Subject: [PATCH 003/203] ARM: mvebu: Add support for NOR flash device on - Armada XP-DB board - -The Armada XP Development Board (DB-78460-BP) has a NOR flash device -connected to the Device Bus. This commit adds the device tree node -to support this device. - -This SoC supports a flexible and dynamic decoding window allocation -scheme; but since this feature is still not implemented we need -to specify the window base address in the device tree node itself. - -This base address has been selected in a completely arbitrary fashion. - -Signed-off-by: Ezequiel Garcia -Signed-off-by: Thomas Petazzoni -Signed-off-by: Jason Cooper ---- - arch/arm/boot/dts/armada-xp-db.dts | 32 ++++++++++++++++++++++++++++++++ - 1 file changed, 32 insertions(+) - ---- a/arch/arm/boot/dts/armada-xp-db.dts -+++ b/arch/arm/boot/dts/armada-xp-db.dts -@@ -30,6 +30,9 @@ - }; - - soc { -+ ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */ -+ 0xf0000000 0 0xf0000000 0x1000000>; /* Device Bus, NOR 16MiB */ -+ - internal-regs { - serial@12000 { - clock-frequency = <250000000>; -@@ -156,6 +159,35 @@ - status = "okay"; - }; - }; -+ -+ devbus-bootcs@10400 { -+ status = "okay"; -+ ranges = <0 0xf0000000 0x1000000>; -+ -+ /* Device Bus parameters are required */ -+ -+ /* Read parameters */ -+ devbus,bus-width = <8>; -+ devbus,turn-off-ps = <60000>; -+ devbus,badr-skew-ps = <0>; -+ devbus,acc-first-ps = <124000>; -+ devbus,acc-next-ps = <248000>; -+ devbus,rd-setup-ps = <0>; -+ devbus,rd-hold-ps = <0>; -+ -+ /* Write parameters */ -+ devbus,sync-enable = <0>; -+ devbus,wr-high-ps = <60000>; -+ devbus,wr-low-ps = <60000>; -+ devbus,ale-wr-ps = <60000>; -+ -+ /* NOR 16 MiB */ -+ nor@0 { -+ compatible = "cfi-flash"; -+ reg = <0 0x1000000>; -+ bank-width = <2>; -+ }; -+ }; - }; - }; - }; diff --git a/target/linux/mvebu/patches-3.10/0004-of-pci-Provide-support-for-parsing-PCI-DT-ranges-pro.patch b/target/linux/mvebu/patches-3.10/0004-of-pci-Provide-support-for-parsing-PCI-DT-ranges-pro.patch deleted file mode 100644 index 70ccd60682..0000000000 --- a/target/linux/mvebu/patches-3.10/0004-of-pci-Provide-support-for-parsing-PCI-DT-ranges-pro.patch +++ /dev/null @@ -1,196 +0,0 @@ -From 7d375772a601bdf227902454705e402fc65b8bdf Mon Sep 17 00:00:00 2001 -From: Andrew Murray -Date: Tue, 7 May 2013 16:31:12 +0100 -Subject: [PATCH 004/203] of/pci: Provide support for parsing PCI DT ranges - property - -This patch factors out common implementation patterns to reduce overall kernel -code and provide a means for host bridge drivers to directly obtain struct -resources from the DT's ranges property without relying on architecture specific -DT handling. This will make it easier to write archiecture independent host bridge -drivers and mitigate against further duplication of DT parsing code. - -This patch can be used in the following way: - - struct of_pci_range_parser parser; - struct of_pci_range range; - - if (of_pci_range_parser_init(&parser, np)) - ; //no ranges property - - for_each_of_pci_range(&parser, &range) { - - /* - directly access properties of the address range, e.g.: - range.pci_space, range.pci_addr, range.cpu_addr, - range.size, range.flags - - alternatively obtain a struct resource, e.g.: - struct resource res; - of_pci_range_to_resource(&range, np, &res); - */ - } - -Additionally the implementation takes care of adjacent ranges and merges them -into a single range (as was the case with powerpc and microblaze). - -Signed-off-by: Andrew Murray -Signed-off-by: Liviu Dudau -Signed-off-by: Thomas Petazzoni -Reviewed-by: Rob Herring -Tested-by: Thomas Petazzoni -Tested-by: Linus Walleij -Tested-by: Jingoo Han -Acked-by: Grant Likely ---- - drivers/of/address.c | 67 ++++++++++++++++++++++++++++++++++++++++++++++ - include/linux/of_address.h | 48 +++++++++++++++++++++++++++++++++ - 2 files changed, 115 insertions(+) - ---- a/drivers/of/address.c -+++ b/drivers/of/address.c -@@ -224,6 +224,73 @@ int of_pci_address_to_resource(struct de - return __of_address_to_resource(dev, addrp, size, flags, NULL, r); - } - EXPORT_SYMBOL_GPL(of_pci_address_to_resource); -+ -+int of_pci_range_parser_init(struct of_pci_range_parser *parser, -+ struct device_node *node) -+{ -+ const int na = 3, ns = 2; -+ int rlen; -+ -+ parser->node = node; -+ parser->pna = of_n_addr_cells(node); -+ parser->np = parser->pna + na + ns; -+ -+ parser->range = of_get_property(node, "ranges", &rlen); -+ if (parser->range == NULL) -+ return -ENOENT; -+ -+ parser->end = parser->range + rlen / sizeof(__be32); -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(of_pci_range_parser_init); -+ -+struct of_pci_range *of_pci_range_parser_one(struct of_pci_range_parser *parser, -+ struct of_pci_range *range) -+{ -+ const int na = 3, ns = 2; -+ -+ if (!range) -+ return NULL; -+ -+ if (!parser->range || parser->range + parser->np > parser->end) -+ return NULL; -+ -+ range->pci_space = parser->range[0]; -+ range->flags = of_bus_pci_get_flags(parser->range); -+ range->pci_addr = of_read_number(parser->range + 1, ns); -+ range->cpu_addr = of_translate_address(parser->node, -+ parser->range + na); -+ range->size = of_read_number(parser->range + parser->pna + na, ns); -+ -+ parser->range += parser->np; -+ -+ /* Now consume following elements while they are contiguous */ -+ while (parser->range + parser->np <= parser->end) { -+ u32 flags, pci_space; -+ u64 pci_addr, cpu_addr, size; -+ -+ pci_space = be32_to_cpup(parser->range); -+ flags = of_bus_pci_get_flags(parser->range); -+ pci_addr = of_read_number(parser->range + 1, ns); -+ cpu_addr = of_translate_address(parser->node, -+ parser->range + na); -+ size = of_read_number(parser->range + parser->pna + na, ns); -+ -+ if (flags != range->flags) -+ break; -+ if (pci_addr != range->pci_addr + range->size || -+ cpu_addr != range->cpu_addr + range->size) -+ break; -+ -+ range->size += size; -+ parser->range += parser->np; -+ } -+ -+ return range; -+} -+EXPORT_SYMBOL_GPL(of_pci_range_parser_one); -+ - #endif /* CONFIG_PCI */ - - /* ---- a/include/linux/of_address.h -+++ b/include/linux/of_address.h -@@ -4,6 +4,36 @@ - #include - #include - -+struct of_pci_range_parser { -+ struct device_node *node; -+ const __be32 *range; -+ const __be32 *end; -+ int np; -+ int pna; -+}; -+ -+struct of_pci_range { -+ u32 pci_space; -+ u64 pci_addr; -+ u64 cpu_addr; -+ u64 size; -+ u32 flags; -+}; -+ -+#define for_each_of_pci_range(parser, range) \ -+ for (; of_pci_range_parser_one(parser, range);) -+ -+static inline void of_pci_range_to_resource(struct of_pci_range *range, -+ struct device_node *np, -+ struct resource *res) -+{ -+ res->flags = range->flags; -+ res->start = range->cpu_addr; -+ res->end = range->cpu_addr + range->size - 1; -+ res->parent = res->child = res->sibling = NULL; -+ res->name = np->full_name; -+} -+ - #ifdef CONFIG_OF_ADDRESS - extern u64 of_translate_address(struct device_node *np, const __be32 *addr); - extern bool of_can_translate_address(struct device_node *dev); -@@ -27,6 +57,11 @@ static inline unsigned long pci_address_ - #define pci_address_to_pio pci_address_to_pio - #endif - -+extern int of_pci_range_parser_init(struct of_pci_range_parser *parser, -+ struct device_node *node); -+extern struct of_pci_range *of_pci_range_parser_one( -+ struct of_pci_range_parser *parser, -+ struct of_pci_range *range); - #else /* CONFIG_OF_ADDRESS */ - #ifndef of_address_to_resource - static inline int of_address_to_resource(struct device_node *dev, int index, -@@ -53,6 +88,19 @@ static inline const __be32 *of_get_addre - { - return NULL; - } -+ -+static inline int of_pci_range_parser_init(struct of_pci_range_parser *parser, -+ struct device_node *node) -+{ -+ return -1; -+} -+ -+static inline struct of_pci_range *of_pci_range_parser_one( -+ struct of_pci_range_parser *parser, -+ struct of_pci_range *range) -+{ -+ return NULL; -+} - #endif /* CONFIG_OF_ADDRESS */ - - diff --git a/target/linux/mvebu/patches-3.10/0006-of-pci-Add-of_pci_parse_bus_range-function.patch b/target/linux/mvebu/patches-3.10/0006-of-pci-Add-of_pci_parse_bus_range-function.patch deleted file mode 100644 index ae07e8387f..0000000000 --- a/target/linux/mvebu/patches-3.10/0006-of-pci-Add-of_pci_parse_bus_range-function.patch +++ /dev/null @@ -1,54 +0,0 @@ -From 3f368ae1994efc17b59ffd34307c76b1f642527e Mon Sep 17 00:00:00 2001 -From: Thierry Reding -Date: Mon, 11 Feb 2013 09:22:20 +0100 -Subject: [PATCH 006/203] of/pci: Add of_pci_parse_bus_range() function - -This function can be used to parse a bus-range property as specified by -device nodes representing PCI bridges. - -Signed-off-by: Thierry Reding ---- - drivers/of/of_pci.c | 25 +++++++++++++++++++++++++ - include/linux/of_pci.h | 1 + - 2 files changed, 26 insertions(+) - ---- a/drivers/of/of_pci.c -+++ b/drivers/of/of_pci.c -@@ -64,3 +64,28 @@ int of_pci_get_devfn(struct device_node - return (be32_to_cpup(reg) >> 8) & 0xff; - } - EXPORT_SYMBOL_GPL(of_pci_get_devfn); -+ -+/** -+ * of_pci_parse_bus_range() - parse the bus-range property of a PCI device -+ * @node: device node -+ * @res: address to a struct resource to return the bus-range -+ * -+ * Returns 0 on success or a negative error-code on failure. -+ */ -+int of_pci_parse_bus_range(struct device_node *node, struct resource *res) -+{ -+ const __be32 *values; -+ int len; -+ -+ values = of_get_property(node, "bus-range", &len); -+ if (!values || len < sizeof(*values) * 2) -+ return -EINVAL; -+ -+ res->name = node->name; -+ res->start = be32_to_cpup(values++); -+ res->end = be32_to_cpup(values); -+ res->flags = IORESOURCE_BUS; -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(of_pci_parse_bus_range); ---- a/include/linux/of_pci.h -+++ b/include/linux/of_pci.h -@@ -11,5 +11,6 @@ struct device_node; - struct device_node *of_pci_find_child_device(struct device_node *parent, - unsigned int devfn); - int of_pci_get_devfn(struct device_node *np); -+int of_pci_parse_bus_range(struct device_node *node, struct resource *res); - - #endif diff --git a/target/linux/mvebu/patches-3.10/0007-clk-mvebu-create-parent-child-relation-for-PCIe-cloc.patch b/target/linux/mvebu/patches-3.10/0007-clk-mvebu-create-parent-child-relation-for-PCIe-cloc.patch deleted file mode 100644 index c556c2755c..0000000000 --- a/target/linux/mvebu/patches-3.10/0007-clk-mvebu-create-parent-child-relation-for-PCIe-cloc.patch +++ /dev/null @@ -1,30 +0,0 @@ -From f12aa05cbfb88e5541814ffa7be7e195471568bd Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Fri, 7 Dec 2012 20:35:20 +0100 -Subject: [PATCH 007/203] clk: mvebu: create parent-child relation for PCIe - clocks on Armada 370 - -The Armada 370 has two gatable clocks for each PCIe interface, and we -want both of them to be enabled. We therefore make one of the two -clocks a child of the other, as we did for the sataX and sataXlnk -clocks on Armada XP. - -Signed-off-by: Thomas Petazzoni -Cc: Mike Turquette ---- - drivers/clk/mvebu/clk-gating-ctrl.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/clk/mvebu/clk-gating-ctrl.c -+++ b/drivers/clk/mvebu/clk-gating-ctrl.c -@@ -119,8 +119,8 @@ static const struct mvebu_soc_descr __in - { "pex1_en", NULL, 2 }, - { "ge1", NULL, 3 }, - { "ge0", NULL, 4 }, -- { "pex0", NULL, 5 }, -- { "pex1", NULL, 9 }, -+ { "pex0", "pex0_en", 5 }, -+ { "pex1", "pex1_en", 9 }, - { "sata0", NULL, 15 }, - { "sdio", NULL, 17 }, - { "tdm", NULL, 25 }, diff --git a/target/linux/mvebu/patches-3.10/0008-clk-mvebu-add-more-PCIe-clocks-for-Armada-XP.patch b/target/linux/mvebu/patches-3.10/0008-clk-mvebu-add-more-PCIe-clocks-for-Armada-XP.patch deleted file mode 100644 index 871aa3d21d..0000000000 --- a/target/linux/mvebu/patches-3.10/0008-clk-mvebu-add-more-PCIe-clocks-for-Armada-XP.patch +++ /dev/null @@ -1,50 +0,0 @@ -From 5006da299ae65cadf92932f2f7b062b5a8c65798 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Fri, 18 Jan 2013 16:42:01 +0100 -Subject: [PATCH 008/203] clk: mvebu: add more PCIe clocks for Armada XP - -The current revision of the datasheet only mentions the gatable clocks -for the PCIe 0.0, 0.1, 0.2 and 0.3 interfaces, and forgot to mention -the ones for the PCIe 1.0, 1.1, 1.2, 1.3, 2.0 and 3.0 -interfaces. After confirmation with Marvell engineers, this patch adds -the missing gatable clocks for those PCIe interfaces. - -It also changes the name of the previously existing PCIe gatable -clocks, in order to match the naming using the datasheets. - -Signed-off-by: Thomas Petazzoni -Cc: Mike Turquette ---- - drivers/clk/mvebu/clk-gating-ctrl.c | 14 ++++++++++---- - 1 file changed, 10 insertions(+), 4 deletions(-) - ---- a/drivers/clk/mvebu/clk-gating-ctrl.c -+++ b/drivers/clk/mvebu/clk-gating-ctrl.c -@@ -137,10 +137,14 @@ static const struct mvebu_soc_descr __in - { "ge2", NULL, 2 }, - { "ge1", NULL, 3 }, - { "ge0", NULL, 4 }, -- { "pex0", NULL, 5 }, -- { "pex1", NULL, 6 }, -- { "pex2", NULL, 7 }, -- { "pex3", NULL, 8 }, -+ { "pex00", NULL, 5 }, -+ { "pex01", NULL, 6 }, -+ { "pex02", NULL, 7 }, -+ { "pex03", NULL, 8 }, -+ { "pex10", NULL, 9 }, -+ { "pex11", NULL, 10 }, -+ { "pex12", NULL, 11 }, -+ { "pex13", NULL, 12 }, - { "bp", NULL, 13 }, - { "sata0lnk", NULL, 14 }, - { "sata0", "sata0lnk", 15 }, -@@ -152,6 +156,8 @@ static const struct mvebu_soc_descr __in - { "xor0", NULL, 22 }, - { "crypto", NULL, 23 }, - { "tdm", NULL, 25 }, -+ { "pex20", NULL, 26 }, -+ { "pex30", NULL, 27 }, - { "xor1", NULL, 28 }, - { "sata1lnk", NULL, 29 }, - { "sata1", "sata1lnk", 30 }, diff --git a/target/linux/mvebu/patches-3.10/0009-pci-PCIe-driver-for-Marvell-Armada-370-XP-systems.patch b/target/linux/mvebu/patches-3.10/0009-pci-PCIe-driver-for-Marvell-Armada-370-XP-systems.patch deleted file mode 100644 index 13ddae8c96..0000000000 --- a/target/linux/mvebu/patches-3.10/0009-pci-PCIe-driver-for-Marvell-Armada-370-XP-systems.patch +++ /dev/null @@ -1,1177 +0,0 @@ -From cf7b5cb15e46b5357c60188b75b213a7f0b5fd32 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Fri, 18 Jan 2013 17:42:58 +0100 -Subject: [PATCH 009/203] pci: PCIe driver for Marvell Armada 370/XP systems - -This driver implements the support for the PCIe interfaces on the -Marvell Armada 370/XP ARM SoCs. In the future, it might be extended to -cover earlier families of Marvell SoCs, such as Dove, Orion and -Kirkwood. - -The driver implements the hw_pci operations needed by the core ARM PCI -code to setup PCI devices and get their corresponding IRQs, and the -pci_ops operations that are used by the PCI core to read/write the -configuration space of PCI devices. - -Since the PCIe interfaces of Marvell SoCs are completely separate and -not linked together in a bus, this driver sets up an emulated PCI host -bridge, with one PCI-to-PCI bridge as child for each hardware PCIe -interface. - -In addition, this driver enumerates the different PCIe slots, and for -those having a device plugged in, it sets up the necessary address -decoding windows, using the mvebu-mbus driver. - -Signed-off-by: Thomas Petazzoni -Acked-by: Bjorn Helgaas ---- - .../devicetree/bindings/pci/mvebu-pci.txt | 220 ++++++ - drivers/pci/Kconfig | 2 + - drivers/pci/Makefile | 3 + - drivers/pci/host/Kconfig | 8 + - drivers/pci/host/Makefile | 1 + - drivers/pci/host/pci-mvebu.c | 880 +++++++++++++++++++++ - 6 files changed, 1114 insertions(+) - create mode 100644 Documentation/devicetree/bindings/pci/mvebu-pci.txt - create mode 100644 drivers/pci/host/Kconfig - create mode 100644 drivers/pci/host/Makefile - create mode 100644 drivers/pci/host/pci-mvebu.c - ---- /dev/null -+++ b/Documentation/devicetree/bindings/pci/mvebu-pci.txt -@@ -0,0 +1,220 @@ -+* Marvell EBU PCIe interfaces -+ -+Mandatory properties: -+- compatible: one of the following values: -+ marvell,armada-370-pcie -+ marvell,armada-xp-pcie -+- #address-cells, set to <3> -+- #size-cells, set to <2> -+- #interrupt-cells, set to <1> -+- bus-range: PCI bus numbers covered -+- device_type, set to "pci" -+- ranges: ranges for the PCI memory and I/O regions, as well as the -+ MMIO registers to control the PCIe interfaces. -+ -+In addition, the Device Tree node must have sub-nodes describing each -+PCIe interface, having the following mandatory properties: -+- reg: used only for interrupt mapping, so only the first four bytes -+ are used to refer to the correct bus number and device number. -+- assigned-addresses: reference to the MMIO registers used to control -+ this PCIe interface. -+- clocks: the clock associated to this PCIe interface -+- marvell,pcie-port: the physical PCIe port number -+- status: either "disabled" or "okay" -+- device_type, set to "pci" -+- #address-cells, set to <3> -+- #size-cells, set to <2> -+- #interrupt-cells, set to <1> -+- ranges, empty property. -+- interrupt-map-mask and interrupt-map, standard PCI properties to -+ define the mapping of the PCIe interface to interrupt numbers. -+ -+and the following optional properties: -+- marvell,pcie-lane: the physical PCIe lane number, for ports having -+ multiple lanes. If this property is not found, we assume that the -+ value is 0. -+ -+Example: -+ -+pcie-controller { -+ compatible = "marvell,armada-xp-pcie"; -+ status = "disabled"; -+ device_type = "pci"; -+ -+ #address-cells = <3>; -+ #size-cells = <2>; -+ -+ bus-range = <0x00 0xff>; -+ -+ ranges = <0x82000000 0 0xd0040000 0xd0040000 0 0x00002000 /* Port 0.0 registers */ -+ 0x82000000 0 0xd0042000 0xd0042000 0 0x00002000 /* Port 2.0 registers */ -+ 0x82000000 0 0xd0044000 0xd0044000 0 0x00002000 /* Port 0.1 registers */ -+ 0x82000000 0 0xd0048000 0xd0048000 0 0x00002000 /* Port 0.2 registers */ -+ 0x82000000 0 0xd004c000 0xd004c000 0 0x00002000 /* Port 0.3 registers */ -+ 0x82000000 0 0xd0080000 0xd0080000 0 0x00002000 /* Port 1.0 registers */ -+ 0x82000000 0 0xd0082000 0xd0082000 0 0x00002000 /* Port 3.0 registers */ -+ 0x82000000 0 0xd0084000 0xd0084000 0 0x00002000 /* Port 1.1 registers */ -+ 0x82000000 0 0xd0088000 0xd0088000 0 0x00002000 /* Port 1.2 registers */ -+ 0x82000000 0 0xd008c000 0xd008c000 0 0x00002000 /* Port 1.3 registers */ -+ 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ -+ 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ -+ -+ pcie@1,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82000800 0 0xd0040000 0 0x2000>; -+ reg = <0x0800 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &mpic 58>; -+ marvell,pcie-port = <0>; -+ marvell,pcie-lane = <0>; -+ clocks = <&gateclk 5>; -+ status = "disabled"; -+ }; -+ -+ pcie@2,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82001000 0 0xd0044000 0 0x2000>; -+ reg = <0x1000 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &mpic 59>; -+ marvell,pcie-port = <0>; -+ marvell,pcie-lane = <1>; -+ clocks = <&gateclk 6>; -+ status = "disabled"; -+ }; -+ -+ pcie@3,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82001800 0 0xd0048000 0 0x2000>; -+ reg = <0x1800 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &mpic 60>; -+ marvell,pcie-port = <0>; -+ marvell,pcie-lane = <2>; -+ clocks = <&gateclk 7>; -+ status = "disabled"; -+ }; -+ -+ pcie@4,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82002000 0 0xd004c000 0 0x2000>; -+ reg = <0x2000 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &mpic 61>; -+ marvell,pcie-port = <0>; -+ marvell,pcie-lane = <3>; -+ clocks = <&gateclk 8>; -+ status = "disabled"; -+ }; -+ -+ pcie@5,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82002800 0 0xd0080000 0 0x2000>; -+ reg = <0x2800 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &mpic 62>; -+ marvell,pcie-port = <1>; -+ marvell,pcie-lane = <0>; -+ clocks = <&gateclk 9>; -+ status = "disabled"; -+ }; -+ -+ pcie@6,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82003000 0 0xd0084000 0 0x2000>; -+ reg = <0x3000 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &mpic 63>; -+ marvell,pcie-port = <1>; -+ marvell,pcie-lane = <1>; -+ clocks = <&gateclk 10>; -+ status = "disabled"; -+ }; -+ -+ pcie@7,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82003800 0 0xd0088000 0 0x2000>; -+ reg = <0x3800 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &mpic 64>; -+ marvell,pcie-port = <1>; -+ marvell,pcie-lane = <2>; -+ clocks = <&gateclk 11>; -+ status = "disabled"; -+ }; -+ -+ pcie@8,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82004000 0 0xd008c000 0 0x2000>; -+ reg = <0x4000 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &mpic 65>; -+ marvell,pcie-port = <1>; -+ marvell,pcie-lane = <3>; -+ clocks = <&gateclk 12>; -+ status = "disabled"; -+ }; -+ pcie@9,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82004800 0 0xd0042000 0 0x2000>; -+ reg = <0x4800 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &mpic 99>; -+ marvell,pcie-port = <2>; -+ marvell,pcie-lane = <0>; -+ clocks = <&gateclk 26>; -+ status = "disabled"; -+ }; -+ -+ pcie@10,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82005000 0 0xd0082000 0 0x2000>; -+ reg = <0x5000 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &mpic 103>; -+ marvell,pcie-port = <3>; -+ marvell,pcie-lane = <0>; -+ clocks = <&gateclk 27>; -+ status = "disabled"; -+ }; -+}; ---- a/drivers/pci/Kconfig -+++ b/drivers/pci/Kconfig -@@ -125,3 +125,5 @@ config PCI_IOAPIC - config PCI_LABEL - def_bool y if (DMI || ACPI) - select NLS -+ -+source "drivers/pci/host/Kconfig" ---- a/drivers/pci/Makefile -+++ b/drivers/pci/Makefile -@@ -67,3 +67,6 @@ obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen - obj-$(CONFIG_OF) += of.o - - ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG -+ -+# PCI host controller drivers -+obj-y += host/ ---- /dev/null -+++ b/drivers/pci/host/Kconfig -@@ -0,0 +1,8 @@ -+menu "PCI host controller drivers" -+ depends on PCI -+ -+config PCI_MVEBU -+ bool "Marvell EBU PCIe controller" -+ depends on ARCH_MVEBU -+ -+endmenu ---- /dev/null -+++ b/drivers/pci/host/Makefile -@@ -0,0 +1 @@ -+obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o ---- /dev/null -+++ b/drivers/pci/host/pci-mvebu.c -@@ -0,0 +1,880 @@ -+/* -+ * PCIe driver for Marvell Armada 370 and Armada XP SoCs -+ * -+ * This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without any -+ * warranty of any kind, whether express or implied. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/* -+ * PCIe unit register offsets. -+ */ -+#define PCIE_DEV_ID_OFF 0x0000 -+#define PCIE_CMD_OFF 0x0004 -+#define PCIE_DEV_REV_OFF 0x0008 -+#define PCIE_BAR_LO_OFF(n) (0x0010 + ((n) << 3)) -+#define PCIE_BAR_HI_OFF(n) (0x0014 + ((n) << 3)) -+#define PCIE_HEADER_LOG_4_OFF 0x0128 -+#define PCIE_BAR_CTRL_OFF(n) (0x1804 + (((n) - 1) * 4)) -+#define PCIE_WIN04_CTRL_OFF(n) (0x1820 + ((n) << 4)) -+#define PCIE_WIN04_BASE_OFF(n) (0x1824 + ((n) << 4)) -+#define PCIE_WIN04_REMAP_OFF(n) (0x182c + ((n) << 4)) -+#define PCIE_WIN5_CTRL_OFF 0x1880 -+#define PCIE_WIN5_BASE_OFF 0x1884 -+#define PCIE_WIN5_REMAP_OFF 0x188c -+#define PCIE_CONF_ADDR_OFF 0x18f8 -+#define PCIE_CONF_ADDR_EN 0x80000000 -+#define PCIE_CONF_REG(r) ((((r) & 0xf00) << 16) | ((r) & 0xfc)) -+#define PCIE_CONF_BUS(b) (((b) & 0xff) << 16) -+#define PCIE_CONF_DEV(d) (((d) & 0x1f) << 11) -+#define PCIE_CONF_FUNC(f) (((f) & 0x7) << 8) -+#define PCIE_CONF_ADDR(bus, devfn, where) \ -+ (PCIE_CONF_BUS(bus) | PCIE_CONF_DEV(PCI_SLOT(devfn)) | \ -+ PCIE_CONF_FUNC(PCI_FUNC(devfn)) | PCIE_CONF_REG(where) | \ -+ PCIE_CONF_ADDR_EN) -+#define PCIE_CONF_DATA_OFF 0x18fc -+#define PCIE_MASK_OFF 0x1910 -+#define PCIE_MASK_ENABLE_INTS 0x0f000000 -+#define PCIE_CTRL_OFF 0x1a00 -+#define PCIE_CTRL_X1_MODE 0x0001 -+#define PCIE_STAT_OFF 0x1a04 -+#define PCIE_STAT_BUS 0xff00 -+#define PCIE_STAT_LINK_DOWN BIT(0) -+#define PCIE_DEBUG_CTRL 0x1a60 -+#define PCIE_DEBUG_SOFT_RESET BIT(20) -+ -+/* -+ * This product ID is registered by Marvell, and used when the Marvell -+ * SoC is not the root complex, but an endpoint on the PCIe bus. It is -+ * therefore safe to re-use this PCI ID for our emulated PCI-to-PCI -+ * bridge. -+ */ -+#define MARVELL_EMULATED_PCI_PCI_BRIDGE_ID 0x7846 -+ -+/* PCI configuration space of a PCI-to-PCI bridge */ -+struct mvebu_sw_pci_bridge { -+ u16 vendor; -+ u16 device; -+ u16 command; -+ u16 status; -+ u16 class; -+ u8 interface; -+ u8 revision; -+ u8 bist; -+ u8 header_type; -+ u8 latency_timer; -+ u8 cache_line_size; -+ u32 bar[2]; -+ u8 primary_bus; -+ u8 secondary_bus; -+ u8 subordinate_bus; -+ u8 secondary_latency_timer; -+ u8 iobase; -+ u8 iolimit; -+ u16 secondary_status; -+ u16 membase; -+ u16 memlimit; -+ u16 prefmembase; -+ u16 prefmemlimit; -+ u32 prefbaseupper; -+ u32 preflimitupper; -+ u16 iobaseupper; -+ u16 iolimitupper; -+ u8 cappointer; -+ u8 reserved1; -+ u16 reserved2; -+ u32 romaddr; -+ u8 intline; -+ u8 intpin; -+ u16 bridgectrl; -+}; -+ -+struct mvebu_pcie_port; -+ -+/* Structure representing all PCIe interfaces */ -+struct mvebu_pcie { -+ struct platform_device *pdev; -+ struct mvebu_pcie_port *ports; -+ struct resource io; -+ struct resource realio; -+ struct resource mem; -+ struct resource busn; -+ int nports; -+}; -+ -+/* Structure representing one PCIe interface */ -+struct mvebu_pcie_port { -+ char *name; -+ void __iomem *base; -+ spinlock_t conf_lock; -+ int haslink; -+ u32 port; -+ u32 lane; -+ int devfn; -+ struct clk *clk; -+ struct mvebu_sw_pci_bridge bridge; -+ struct device_node *dn; -+ struct mvebu_pcie *pcie; -+ phys_addr_t memwin_base; -+ size_t memwin_size; -+ phys_addr_t iowin_base; -+ size_t iowin_size; -+}; -+ -+static bool mvebu_pcie_link_up(struct mvebu_pcie_port *port) -+{ -+ return !(readl(port->base + PCIE_STAT_OFF) & PCIE_STAT_LINK_DOWN); -+} -+ -+static void mvebu_pcie_set_local_bus_nr(struct mvebu_pcie_port *port, int nr) -+{ -+ u32 stat; -+ -+ stat = readl(port->base + PCIE_STAT_OFF); -+ stat &= ~PCIE_STAT_BUS; -+ stat |= nr << 8; -+ writel(stat, port->base + PCIE_STAT_OFF); -+} -+ -+/* -+ * Setup PCIE BARs and Address Decode Wins: -+ * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks -+ * WIN[0-3] -> DRAM bank[0-3] -+ */ -+static void __init mvebu_pcie_setup_wins(struct mvebu_pcie_port *port) -+{ -+ const struct mbus_dram_target_info *dram; -+ u32 size; -+ int i; -+ -+ dram = mv_mbus_dram_info(); -+ -+ /* First, disable and clear BARs and windows. */ -+ for (i = 1; i < 3; i++) { -+ writel(0, port->base + PCIE_BAR_CTRL_OFF(i)); -+ writel(0, port->base + PCIE_BAR_LO_OFF(i)); -+ writel(0, port->base + PCIE_BAR_HI_OFF(i)); -+ } -+ -+ for (i = 0; i < 5; i++) { -+ writel(0, port->base + PCIE_WIN04_CTRL_OFF(i)); -+ writel(0, port->base + PCIE_WIN04_BASE_OFF(i)); -+ writel(0, port->base + PCIE_WIN04_REMAP_OFF(i)); -+ } -+ -+ writel(0, port->base + PCIE_WIN5_CTRL_OFF); -+ writel(0, port->base + PCIE_WIN5_BASE_OFF); -+ writel(0, port->base + PCIE_WIN5_REMAP_OFF); -+ -+ /* Setup windows for DDR banks. Count total DDR size on the fly. */ -+ size = 0; -+ for (i = 0; i < dram->num_cs; i++) { -+ const struct mbus_dram_window *cs = dram->cs + i; -+ -+ writel(cs->base & 0xffff0000, -+ port->base + PCIE_WIN04_BASE_OFF(i)); -+ writel(0, port->base + PCIE_WIN04_REMAP_OFF(i)); -+ writel(((cs->size - 1) & 0xffff0000) | -+ (cs->mbus_attr << 8) | -+ (dram->mbus_dram_target_id << 4) | 1, -+ port->base + PCIE_WIN04_CTRL_OFF(i)); -+ -+ size += cs->size; -+ } -+ -+ /* Round up 'size' to the nearest power of two. */ -+ if ((size & (size - 1)) != 0) -+ size = 1 << fls(size); -+ -+ /* Setup BAR[1] to all DRAM banks. */ -+ writel(dram->cs[0].base, port->base + PCIE_BAR_LO_OFF(1)); -+ writel(0, port->base + PCIE_BAR_HI_OFF(1)); -+ writel(((size - 1) & 0xffff0000) | 1, -+ port->base + PCIE_BAR_CTRL_OFF(1)); -+} -+ -+static void __init mvebu_pcie_setup_hw(struct mvebu_pcie_port *port) -+{ -+ u16 cmd; -+ u32 mask; -+ -+ /* Point PCIe unit MBUS decode windows to DRAM space. */ -+ mvebu_pcie_setup_wins(port); -+ -+ /* Master + slave enable. */ -+ cmd = readw(port->base + PCIE_CMD_OFF); -+ cmd |= PCI_COMMAND_IO; -+ cmd |= PCI_COMMAND_MEMORY; -+ cmd |= PCI_COMMAND_MASTER; -+ writew(cmd, port->base + PCIE_CMD_OFF); -+ -+ /* Enable interrupt lines A-D. */ -+ mask = readl(port->base + PCIE_MASK_OFF); -+ mask |= PCIE_MASK_ENABLE_INTS; -+ writel(mask, port->base + PCIE_MASK_OFF); -+} -+ -+static int mvebu_pcie_hw_rd_conf(struct mvebu_pcie_port *port, -+ struct pci_bus *bus, -+ u32 devfn, int where, int size, u32 *val) -+{ -+ writel(PCIE_CONF_ADDR(bus->number, devfn, where), -+ port->base + PCIE_CONF_ADDR_OFF); -+ -+ *val = readl(port->base + PCIE_CONF_DATA_OFF); -+ -+ if (size == 1) -+ *val = (*val >> (8 * (where & 3))) & 0xff; -+ else if (size == 2) -+ *val = (*val >> (8 * (where & 3))) & 0xffff; -+ -+ return PCIBIOS_SUCCESSFUL; -+} -+ -+static int mvebu_pcie_hw_wr_conf(struct mvebu_pcie_port *port, -+ struct pci_bus *bus, -+ u32 devfn, int where, int size, u32 val) -+{ -+ int ret = PCIBIOS_SUCCESSFUL; -+ -+ writel(PCIE_CONF_ADDR(bus->number, devfn, where), -+ port->base + PCIE_CONF_ADDR_OFF); -+ -+ if (size == 4) -+ writel(val, port->base + PCIE_CONF_DATA_OFF); -+ else if (size == 2) -+ writew(val, port->base + PCIE_CONF_DATA_OFF + (where & 3)); -+ else if (size == 1) -+ writeb(val, port->base + PCIE_CONF_DATA_OFF + (where & 3)); -+ else -+ ret = PCIBIOS_BAD_REGISTER_NUMBER; -+ -+ return ret; -+} -+ -+static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port) -+{ -+ phys_addr_t iobase; -+ -+ /* Are the new iobase/iolimit values invalid? */ -+ if (port->bridge.iolimit < port->bridge.iobase || -+ port->bridge.iolimitupper < port->bridge.iobaseupper) { -+ -+ /* If a window was configured, remove it */ -+ if (port->iowin_base) { -+ mvebu_mbus_del_window(port->iowin_base, -+ port->iowin_size); -+ port->iowin_base = 0; -+ port->iowin_size = 0; -+ } -+ -+ return; -+ } -+ -+ /* -+ * We read the PCI-to-PCI bridge emulated registers, and -+ * calculate the base address and size of the address decoding -+ * window to setup, according to the PCI-to-PCI bridge -+ * specifications. iobase is the bus address, port->iowin_base -+ * is the CPU address. -+ */ -+ iobase = ((port->bridge.iobase & 0xF0) << 8) | -+ (port->bridge.iobaseupper << 16); -+ port->iowin_base = port->pcie->io.start + iobase; -+ port->iowin_size = ((0xFFF | ((port->bridge.iolimit & 0xF0) << 8) | -+ (port->bridge.iolimitupper << 16)) - -+ iobase); -+ -+ mvebu_mbus_add_window_remap_flags(port->name, port->iowin_base, -+ port->iowin_size, -+ iobase, -+ MVEBU_MBUS_PCI_IO); -+ -+ pci_ioremap_io(iobase, port->iowin_base); -+} -+ -+static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port) -+{ -+ /* Are the new membase/memlimit values invalid? */ -+ if (port->bridge.memlimit < port->bridge.membase) { -+ -+ /* If a window was configured, remove it */ -+ if (port->memwin_base) { -+ mvebu_mbus_del_window(port->memwin_base, -+ port->memwin_size); -+ port->memwin_base = 0; -+ port->memwin_size = 0; -+ } -+ -+ return; -+ } -+ -+ /* -+ * We read the PCI-to-PCI bridge emulated registers, and -+ * calculate the base address and size of the address decoding -+ * window to setup, according to the PCI-to-PCI bridge -+ * specifications. -+ */ -+ port->memwin_base = ((port->bridge.membase & 0xFFF0) << 16); -+ port->memwin_size = -+ (((port->bridge.memlimit & 0xFFF0) << 16) | 0xFFFFF) - -+ port->memwin_base; -+ -+ mvebu_mbus_add_window_remap_flags(port->name, port->memwin_base, -+ port->memwin_size, -+ MVEBU_MBUS_NO_REMAP, -+ MVEBU_MBUS_PCI_MEM); -+} -+ -+/* -+ * Initialize the configuration space of the PCI-to-PCI bridge -+ * associated with the given PCIe interface. -+ */ -+static void mvebu_sw_pci_bridge_init(struct mvebu_pcie_port *port) -+{ -+ struct mvebu_sw_pci_bridge *bridge = &port->bridge; -+ -+ memset(bridge, 0, sizeof(struct mvebu_sw_pci_bridge)); -+ -+ bridge->status = PCI_STATUS_CAP_LIST; -+ bridge->class = PCI_CLASS_BRIDGE_PCI; -+ bridge->vendor = PCI_VENDOR_ID_MARVELL; -+ bridge->device = MARVELL_EMULATED_PCI_PCI_BRIDGE_ID; -+ bridge->header_type = PCI_HEADER_TYPE_BRIDGE; -+ bridge->cache_line_size = 0x10; -+ -+ /* We support 32 bits I/O addressing */ -+ bridge->iobase = PCI_IO_RANGE_TYPE_32; -+ bridge->iolimit = PCI_IO_RANGE_TYPE_32; -+} -+ -+/* -+ * Read the configuration space of the PCI-to-PCI bridge associated to -+ * the given PCIe interface. -+ */ -+static int mvebu_sw_pci_bridge_read(struct mvebu_pcie_port *port, -+ unsigned int where, int size, u32 *value) -+{ -+ struct mvebu_sw_pci_bridge *bridge = &port->bridge; -+ -+ switch (where & ~3) { -+ case PCI_VENDOR_ID: -+ *value = bridge->device << 16 | bridge->vendor; -+ break; -+ -+ case PCI_COMMAND: -+ *value = bridge->status << 16 | bridge->command; -+ break; -+ -+ case PCI_CLASS_REVISION: -+ *value = bridge->class << 16 | bridge->interface << 8 | -+ bridge->revision; -+ break; -+ -+ case PCI_CACHE_LINE_SIZE: -+ *value = bridge->bist << 24 | bridge->header_type << 16 | -+ bridge->latency_timer << 8 | bridge->cache_line_size; -+ break; -+ -+ case PCI_BASE_ADDRESS_0 ... PCI_BASE_ADDRESS_1: -+ *value = bridge->bar[((where & ~3) - PCI_BASE_ADDRESS_0) / 4]; -+ break; -+ -+ case PCI_PRIMARY_BUS: -+ *value = (bridge->secondary_latency_timer << 24 | -+ bridge->subordinate_bus << 16 | -+ bridge->secondary_bus << 8 | -+ bridge->primary_bus); -+ break; -+ -+ case PCI_IO_BASE: -+ *value = (bridge->secondary_status << 16 | -+ bridge->iolimit << 8 | -+ bridge->iobase); -+ break; -+ -+ case PCI_MEMORY_BASE: -+ *value = (bridge->memlimit << 16 | bridge->membase); -+ break; -+ -+ case PCI_PREF_MEMORY_BASE: -+ *value = (bridge->prefmemlimit << 16 | bridge->prefmembase); -+ break; -+ -+ case PCI_PREF_BASE_UPPER32: -+ *value = bridge->prefbaseupper; -+ break; -+ -+ case PCI_PREF_LIMIT_UPPER32: -+ *value = bridge->preflimitupper; -+ break; -+ -+ case PCI_IO_BASE_UPPER16: -+ *value = (bridge->iolimitupper << 16 | bridge->iobaseupper); -+ break; -+ -+ case PCI_ROM_ADDRESS1: -+ *value = 0; -+ break; -+ -+ default: -+ *value = 0xffffffff; -+ return PCIBIOS_BAD_REGISTER_NUMBER; -+ } -+ -+ if (size == 2) -+ *value = (*value >> (8 * (where & 3))) & 0xffff; -+ else if (size == 1) -+ *value = (*value >> (8 * (where & 3))) & 0xff; -+ -+ return PCIBIOS_SUCCESSFUL; -+} -+ -+/* Write to the PCI-to-PCI bridge configuration space */ -+static int mvebu_sw_pci_bridge_write(struct mvebu_pcie_port *port, -+ unsigned int where, int size, u32 value) -+{ -+ struct mvebu_sw_pci_bridge *bridge = &port->bridge; -+ u32 mask, reg; -+ int err; -+ -+ if (size == 4) -+ mask = 0x0; -+ else if (size == 2) -+ mask = ~(0xffff << ((where & 3) * 8)); -+ else if (size == 1) -+ mask = ~(0xff << ((where & 3) * 8)); -+ else -+ return PCIBIOS_BAD_REGISTER_NUMBER; -+ -+ err = mvebu_sw_pci_bridge_read(port, where & ~3, 4, ®); -+ if (err) -+ return err; -+ -+ value = (reg & mask) | value << ((where & 3) * 8); -+ -+ switch (where & ~3) { -+ case PCI_COMMAND: -+ bridge->command = value & 0xffff; -+ bridge->status = value >> 16; -+ break; -+ -+ case PCI_BASE_ADDRESS_0 ... PCI_BASE_ADDRESS_1: -+ bridge->bar[((where & ~3) - PCI_BASE_ADDRESS_0) / 4] = value; -+ break; -+ -+ case PCI_IO_BASE: -+ /* -+ * We also keep bit 1 set, it is a read-only bit that -+ * indicates we support 32 bits addressing for the -+ * I/O -+ */ -+ bridge->iobase = (value & 0xff) | PCI_IO_RANGE_TYPE_32; -+ bridge->iolimit = ((value >> 8) & 0xff) | PCI_IO_RANGE_TYPE_32; -+ bridge->secondary_status = value >> 16; -+ mvebu_pcie_handle_iobase_change(port); -+ break; -+ -+ case PCI_MEMORY_BASE: -+ bridge->membase = value & 0xffff; -+ bridge->memlimit = value >> 16; -+ mvebu_pcie_handle_membase_change(port); -+ break; -+ -+ case PCI_PREF_MEMORY_BASE: -+ bridge->prefmembase = value & 0xffff; -+ bridge->prefmemlimit = value >> 16; -+ break; -+ -+ case PCI_PREF_BASE_UPPER32: -+ bridge->prefbaseupper = value; -+ break; -+ -+ case PCI_PREF_LIMIT_UPPER32: -+ bridge->preflimitupper = value; -+ break; -+ -+ case PCI_IO_BASE_UPPER16: -+ bridge->iobaseupper = value & 0xffff; -+ bridge->iolimitupper = value >> 16; -+ mvebu_pcie_handle_iobase_change(port); -+ break; -+ -+ case PCI_PRIMARY_BUS: -+ bridge->primary_bus = value & 0xff; -+ bridge->secondary_bus = (value >> 8) & 0xff; -+ bridge->subordinate_bus = (value >> 16) & 0xff; -+ bridge->secondary_latency_timer = (value >> 24) & 0xff; -+ mvebu_pcie_set_local_bus_nr(port, bridge->secondary_bus); -+ break; -+ -+ default: -+ break; -+ } -+ -+ return PCIBIOS_SUCCESSFUL; -+} -+ -+static inline struct mvebu_pcie *sys_to_pcie(struct pci_sys_data *sys) -+{ -+ return sys->private_data; -+} -+ -+static struct mvebu_pcie_port * -+mvebu_pcie_find_port(struct mvebu_pcie *pcie, struct pci_bus *bus, -+ int devfn) -+{ -+ int i; -+ -+ for (i = 0; i < pcie->nports; i++) { -+ struct mvebu_pcie_port *port = &pcie->ports[i]; -+ if (bus->number == 0 && port->devfn == devfn) -+ return port; -+ if (bus->number != 0 && -+ port->bridge.secondary_bus == bus->number) -+ return port; -+ } -+ -+ return NULL; -+} -+ -+/* PCI configuration space write function */ -+static int mvebu_pcie_wr_conf(struct pci_bus *bus, u32 devfn, -+ int where, int size, u32 val) -+{ -+ struct mvebu_pcie *pcie = sys_to_pcie(bus->sysdata); -+ struct mvebu_pcie_port *port; -+ unsigned long flags; -+ int ret; -+ -+ port = mvebu_pcie_find_port(pcie, bus, devfn); -+ if (!port) -+ return PCIBIOS_DEVICE_NOT_FOUND; -+ -+ /* Access the emulated PCI-to-PCI bridge */ -+ if (bus->number == 0) -+ return mvebu_sw_pci_bridge_write(port, where, size, val); -+ -+ if (!port->haslink || PCI_SLOT(devfn) != 0) -+ return PCIBIOS_DEVICE_NOT_FOUND; -+ -+ /* Access the real PCIe interface */ -+ spin_lock_irqsave(&port->conf_lock, flags); -+ ret = mvebu_pcie_hw_wr_conf(port, bus, -+ PCI_DEVFN(1, PCI_FUNC(devfn)), -+ where, size, val); -+ spin_unlock_irqrestore(&port->conf_lock, flags); -+ -+ return ret; -+} -+ -+/* PCI configuration space read function */ -+static int mvebu_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, -+ int size, u32 *val) -+{ -+ struct mvebu_pcie *pcie = sys_to_pcie(bus->sysdata); -+ struct mvebu_pcie_port *port; -+ unsigned long flags; -+ int ret; -+ -+ port = mvebu_pcie_find_port(pcie, bus, devfn); -+ if (!port) { -+ *val = 0xffffffff; -+ return PCIBIOS_DEVICE_NOT_FOUND; -+ } -+ -+ /* Access the emulated PCI-to-PCI bridge */ -+ if (bus->number == 0) -+ return mvebu_sw_pci_bridge_read(port, where, size, val); -+ -+ if (!port->haslink || PCI_SLOT(devfn) != 0) { -+ *val = 0xffffffff; -+ return PCIBIOS_DEVICE_NOT_FOUND; -+ } -+ -+ /* Access the real PCIe interface */ -+ spin_lock_irqsave(&port->conf_lock, flags); -+ ret = mvebu_pcie_hw_rd_conf(port, bus, -+ PCI_DEVFN(1, PCI_FUNC(devfn)), -+ where, size, val); -+ spin_unlock_irqrestore(&port->conf_lock, flags); -+ -+ return ret; -+} -+ -+static struct pci_ops mvebu_pcie_ops = { -+ .read = mvebu_pcie_rd_conf, -+ .write = mvebu_pcie_wr_conf, -+}; -+ -+static int __init mvebu_pcie_setup(int nr, struct pci_sys_data *sys) -+{ -+ struct mvebu_pcie *pcie = sys_to_pcie(sys); -+ int i; -+ -+ pci_add_resource_offset(&sys->resources, &pcie->realio, sys->io_offset); -+ pci_add_resource_offset(&sys->resources, &pcie->mem, sys->mem_offset); -+ pci_add_resource(&sys->resources, &pcie->busn); -+ -+ for (i = 0; i < pcie->nports; i++) { -+ struct mvebu_pcie_port *port = &pcie->ports[i]; -+ mvebu_pcie_setup_hw(port); -+ } -+ -+ return 1; -+} -+ -+static int __init mvebu_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -+{ -+ struct of_irq oirq; -+ int ret; -+ -+ ret = of_irq_map_pci(dev, &oirq); -+ if (ret) -+ return ret; -+ -+ return irq_create_of_mapping(oirq.controller, oirq.specifier, -+ oirq.size); -+} -+ -+static struct pci_bus *mvebu_pcie_scan_bus(int nr, struct pci_sys_data *sys) -+{ -+ struct mvebu_pcie *pcie = sys_to_pcie(sys); -+ struct pci_bus *bus; -+ -+ bus = pci_create_root_bus(&pcie->pdev->dev, sys->busnr, -+ &mvebu_pcie_ops, sys, &sys->resources); -+ if (!bus) -+ return NULL; -+ -+ pci_scan_child_bus(bus); -+ -+ return bus; -+} -+ -+resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev, -+ const struct resource *res, -+ resource_size_t start, -+ resource_size_t size, -+ resource_size_t align) -+{ -+ if (dev->bus->number != 0) -+ return start; -+ -+ /* -+ * On the PCI-to-PCI bridge side, the I/O windows must have at -+ * least a 64 KB size and be aligned on their size, and the -+ * memory windows must have at least a 1 MB size and be -+ * aligned on their size -+ */ -+ if (res->flags & IORESOURCE_IO) -+ return round_up(start, max((resource_size_t)SZ_64K, size)); -+ else if (res->flags & IORESOURCE_MEM) -+ return round_up(start, max((resource_size_t)SZ_1M, size)); -+ else -+ return start; -+} -+ -+static void __init mvebu_pcie_enable(struct mvebu_pcie *pcie) -+{ -+ struct hw_pci hw; -+ -+ memset(&hw, 0, sizeof(hw)); -+ -+ hw.nr_controllers = 1; -+ hw.private_data = (void **)&pcie; -+ hw.setup = mvebu_pcie_setup; -+ hw.scan = mvebu_pcie_scan_bus; -+ hw.map_irq = mvebu_pcie_map_irq; -+ hw.ops = &mvebu_pcie_ops; -+ hw.align_resource = mvebu_pcie_align_resource; -+ -+ pci_common_init(&hw); -+} -+ -+/* -+ * Looks up the list of register addresses encoded into the reg = -+ * <...> property for one that matches the given port/lane. Once -+ * found, maps it. -+ */ -+static void __iomem * __init -+mvebu_pcie_map_registers(struct platform_device *pdev, -+ struct device_node *np, -+ struct mvebu_pcie_port *port) -+{ -+ struct resource regs; -+ int ret = 0; -+ -+ ret = of_address_to_resource(np, 0, ®s); -+ if (ret) -+ return NULL; -+ -+ return devm_request_and_ioremap(&pdev->dev, ®s); -+} -+ -+static int __init mvebu_pcie_probe(struct platform_device *pdev) -+{ -+ struct mvebu_pcie *pcie; -+ struct device_node *np = pdev->dev.of_node; -+ struct of_pci_range range; -+ struct of_pci_range_parser parser; -+ struct device_node *child; -+ int i, ret; -+ -+ pcie = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_pcie), -+ GFP_KERNEL); -+ if (!pcie) -+ return -ENOMEM; -+ -+ pcie->pdev = pdev; -+ -+ if (of_pci_range_parser_init(&parser, np)) -+ return -EINVAL; -+ -+ /* Get the I/O and memory ranges from DT */ -+ for_each_of_pci_range(&parser, &range) { -+ unsigned long restype = range.flags & IORESOURCE_TYPE_BITS; -+ if (restype == IORESOURCE_IO) { -+ of_pci_range_to_resource(&range, np, &pcie->io); -+ of_pci_range_to_resource(&range, np, &pcie->realio); -+ pcie->io.name = "I/O"; -+ pcie->realio.start = max_t(resource_size_t, -+ PCIBIOS_MIN_IO, -+ range.pci_addr); -+ pcie->realio.end = min_t(resource_size_t, -+ IO_SPACE_LIMIT, -+ range.pci_addr + range.size); -+ } -+ if (restype == IORESOURCE_MEM) { -+ of_pci_range_to_resource(&range, np, &pcie->mem); -+ pcie->mem.name = "MEM"; -+ } -+ } -+ -+ /* Get the bus range */ -+ ret = of_pci_parse_bus_range(np, &pcie->busn); -+ if (ret) { -+ dev_err(&pdev->dev, "failed to parse bus-range property: %d\n", -+ ret); -+ return ret; -+ } -+ -+ for_each_child_of_node(pdev->dev.of_node, child) { -+ if (!of_device_is_available(child)) -+ continue; -+ pcie->nports++; -+ } -+ -+ pcie->ports = devm_kzalloc(&pdev->dev, pcie->nports * -+ sizeof(struct mvebu_pcie_port), -+ GFP_KERNEL); -+ if (!pcie->ports) -+ return -ENOMEM; -+ -+ i = 0; -+ for_each_child_of_node(pdev->dev.of_node, child) { -+ struct mvebu_pcie_port *port = &pcie->ports[i]; -+ -+ if (!of_device_is_available(child)) -+ continue; -+ -+ port->pcie = pcie; -+ -+ if (of_property_read_u32(child, "marvell,pcie-port", -+ &port->port)) { -+ dev_warn(&pdev->dev, -+ "ignoring PCIe DT node, missing pcie-port property\n"); -+ continue; -+ } -+ -+ if (of_property_read_u32(child, "marvell,pcie-lane", -+ &port->lane)) -+ port->lane = 0; -+ -+ port->name = kasprintf(GFP_KERNEL, "pcie%d.%d", -+ port->port, port->lane); -+ -+ port->devfn = of_pci_get_devfn(child); -+ if (port->devfn < 0) -+ continue; -+ -+ port->base = mvebu_pcie_map_registers(pdev, child, port); -+ if (!port->base) { -+ dev_err(&pdev->dev, "PCIe%d.%d: cannot map registers\n", -+ port->port, port->lane); -+ continue; -+ } -+ -+ if (mvebu_pcie_link_up(port)) { -+ port->haslink = 1; -+ dev_info(&pdev->dev, "PCIe%d.%d: link up\n", -+ port->port, port->lane); -+ } else { -+ port->haslink = 0; -+ dev_info(&pdev->dev, "PCIe%d.%d: link down\n", -+ port->port, port->lane); -+ } -+ -+ port->clk = of_clk_get_by_name(child, NULL); -+ if (!port->clk) { -+ dev_err(&pdev->dev, "PCIe%d.%d: cannot get clock\n", -+ port->port, port->lane); -+ iounmap(port->base); -+ port->haslink = 0; -+ continue; -+ } -+ -+ port->dn = child; -+ -+ clk_prepare_enable(port->clk); -+ spin_lock_init(&port->conf_lock); -+ -+ mvebu_sw_pci_bridge_init(port); -+ -+ i++; -+ } -+ -+ mvebu_pcie_enable(pcie); -+ -+ return 0; -+} -+ -+static const struct of_device_id mvebu_pcie_of_match_table[] = { -+ { .compatible = "marvell,armada-xp-pcie", }, -+ { .compatible = "marvell,armada-370-pcie", }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, mvebu_pcie_of_match_table); -+ -+static struct platform_driver mvebu_pcie_driver = { -+ .driver = { -+ .owner = THIS_MODULE, -+ .name = "mvebu-pcie", -+ .of_match_table = -+ of_match_ptr(mvebu_pcie_of_match_table), -+ }, -+}; -+ -+static int __init mvebu_pcie_init(void) -+{ -+ return platform_driver_probe(&mvebu_pcie_driver, -+ mvebu_pcie_probe); -+} -+ -+subsys_initcall(mvebu_pcie_init); -+ -+MODULE_AUTHOR("Thomas Petazzoni "); -+MODULE_DESCRIPTION("Marvell EBU PCIe driver"); -+MODULE_LICENSE("GPLv2"); diff --git a/target/linux/mvebu/patches-3.10/0010-arm-mvebu-PCIe-support-is-now-available-on-mvebu.patch b/target/linux/mvebu/patches-3.10/0010-arm-mvebu-PCIe-support-is-now-available-on-mvebu.patch deleted file mode 100644 index 2e90b7d8d1..0000000000 --- a/target/linux/mvebu/patches-3.10/0010-arm-mvebu-PCIe-support-is-now-available-on-mvebu.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 430d545623552ddc6b68785032cc9129d0a00b43 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Fri, 7 Dec 2012 20:56:52 +0100 -Subject: [PATCH 010/203] arm: mvebu: PCIe support is now available on mvebu - -Now that the PCIe driver for mvebu has been integrated and all its -relevant dependencies, we can mark the ARCH_MVEBU platform has -MIGHT_HAVE_PCI, which allows to select the PCI bus support if needed. - -Signed-off-by: Thomas Petazzoni ---- - arch/arm/mach-mvebu/Kconfig | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/arch/arm/mach-mvebu/Kconfig -+++ b/arch/arm/mach-mvebu/Kconfig -@@ -16,6 +16,8 @@ config ARCH_MVEBU - select MVEBU_MBUS - select ZONE_DMA if ARM_LPAE - select ARCH_REQUIRE_GPIOLIB -+ select MIGHT_HAVE_PCI -+ select PCI_QUIRKS if PCI - - if ARCH_MVEBU - diff --git a/target/linux/mvebu/patches-3.10/0011-arm-mvebu-update-defconfig-with-PCI-and-USB-support.patch b/target/linux/mvebu/patches-3.10/0011-arm-mvebu-update-defconfig-with-PCI-and-USB-support.patch deleted file mode 100644 index 3aeeb47e69..0000000000 --- a/target/linux/mvebu/patches-3.10/0011-arm-mvebu-update-defconfig-with-PCI-and-USB-support.patch +++ /dev/null @@ -1,36 +0,0 @@ -From c3da1bb20af37c09a07756d54420470788f131c7 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Fri, 7 Dec 2012 22:49:57 +0100 -Subject: [PATCH 011/203] arm: mvebu: update defconfig with PCI and USB support - -Now that we have the necessary drivers and Device Tree informations to -support PCIe on Armada 370 and Armada XP, enable the CONFIG_PCI -option. - -Also, since the Armada 370 Mirabox has a built-in USB XHCI controller -connected on the PCIe bus, enable the corresponding options as well. - -Signed-off-by: Thomas Petazzoni ---- - arch/arm/configs/mvebu_defconfig | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/arch/arm/configs/mvebu_defconfig -+++ b/arch/arm/configs/mvebu_defconfig -@@ -13,6 +13,8 @@ CONFIG_MACH_ARMADA_370=y - CONFIG_MACH_ARMADA_XP=y - # CONFIG_CACHE_L2X0 is not set - # CONFIG_SWP_EMULATE is not set -+CONFIG_PCI=y -+CONFIG_PCI_MVEBU=y - CONFIG_SMP=y - CONFIG_AEABI=y - CONFIG_HIGHMEM=y -@@ -61,6 +63,7 @@ CONFIG_USB=y - CONFIG_USB_EHCI_HCD=y - CONFIG_USB_EHCI_ROOT_HUB_TT=y - CONFIG_USB_STORAGE=y -+CONFIG_USB_XHCI_HCD=y - CONFIG_MMC=y - CONFIG_MMC_MVSDIO=y - CONFIG_NEW_LEDS=y diff --git a/target/linux/mvebu/patches-3.10/0012-arm-mvebu-mark-functions-of-armada-370-xp.c-as-stati.patch b/target/linux/mvebu/patches-3.10/0012-arm-mvebu-mark-functions-of-armada-370-xp.c-as-stati.patch deleted file mode 100644 index bbb5ceb790..0000000000 --- a/target/linux/mvebu/patches-3.10/0012-arm-mvebu-mark-functions-of-armada-370-xp.c-as-stati.patch +++ /dev/null @@ -1,40 +0,0 @@ -From f865fd0e1c10bb044d56037eaa6ac4a4a122c62a Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Tue, 21 May 2013 12:33:28 +0200 -Subject: [PATCH 012/203] arm: mvebu: mark functions of armada-370-xp.c as - static - -All the functions in armada-370-xp.c are called from the -DT_MACHINE_START function pointers, so there is no need for them to be -visible outside of this file, and we therefore mark them as static. - -Signed-off-by: Thomas Petazzoni -Signed-off-by: Jason Cooper ---- - arch/arm/mach-mvebu/armada-370-xp.c | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - ---- a/arch/arm/mach-mvebu/armada-370-xp.c -+++ b/arch/arm/mach-mvebu/armada-370-xp.c -@@ -38,18 +38,18 @@ static struct map_desc armada_370_xp_io_ - }, - }; - --void __init armada_370_xp_map_io(void) -+static void __init armada_370_xp_map_io(void) - { - iotable_init(armada_370_xp_io_desc, ARRAY_SIZE(armada_370_xp_io_desc)); - } - --void __init armada_370_xp_timer_and_clk_init(void) -+static void __init armada_370_xp_timer_and_clk_init(void) - { - mvebu_clocks_init(); - armada_370_xp_timer_init(); - } - --void __init armada_370_xp_init_early(void) -+static void __init armada_370_xp_init_early(void) - { - char *mbus_soc_name; - diff --git a/target/linux/mvebu/patches-3.10/0013-drivers-memory-Introduce-Marvell-EBU-Device-Bus-driv.patch b/target/linux/mvebu/patches-3.10/0013-drivers-memory-Introduce-Marvell-EBU-Device-Bus-driv.patch deleted file mode 100644 index 5f00e9f36e..0000000000 --- a/target/linux/mvebu/patches-3.10/0013-drivers-memory-Introduce-Marvell-EBU-Device-Bus-driv.patch +++ /dev/null @@ -1,568 +0,0 @@ -From 8b417cc752ac4158dcfcf02beafce80b90fd827d Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Tue, 23 Apr 2013 16:21:26 -0300 -Subject: [PATCH 013/203] drivers: memory: Introduce Marvell EBU Device Bus - driver - -Marvell EBU SoCs such as Armada 370/XP, Orion5x (88f5xxx) and -Discovery (mv78xx0) supports a Device Bus controller to access several -kinds of memories and I/O devices (NOR, NAND, SRAM, FPGA). - -This commit adds a driver to handle this controller. So far only -Armada 370, Armada XP and Discovery SoCs are supported. - -The driver must be registered through a device tree node; -as explained in the binding document. - -For each child node in the device tree, this driver will: - * set timing parameters - * register a child device - * setup an address decoding window, using the mbus driver - -Keep in mind the address decoding window setup is only a temporary hack. -This code will be removed from this devbus driver as soon as a proper device -tree binding for the mbus driver is added. - -Signed-off-by: Ezequiel Garcia -Acked-by: Arnd Bergmann -Acked-by: Jason Cooper -Signed-off-by: Greg Kroah-Hartman ---- - .../bindings/memory-controllers/mvebu-devbus.txt | 156 ++++++++++ - drivers/memory/Kconfig | 10 + - drivers/memory/Makefile | 1 + - drivers/memory/mvebu-devbus.c | 340 +++++++++++++++++++++ - 4 files changed, 507 insertions(+) - create mode 100644 Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt - create mode 100644 drivers/memory/mvebu-devbus.c - ---- /dev/null -+++ b/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt -@@ -0,0 +1,156 @@ -+Device tree bindings for MVEBU Device Bus controllers -+ -+The Device Bus controller available in some Marvell's SoC allows to control -+different types of standard memory and I/O devices such as NOR, NAND, and FPGA. -+The actual devices are instantiated from the child nodes of a Device Bus node. -+ -+Required properties: -+ -+ - compatible: Currently only Armada 370/XP SoC are supported, -+ with this compatible string: -+ -+ marvell,mvebu-devbus -+ -+ - reg: A resource specifier for the register space. -+ This is the base address of a chip select within -+ the controller's register space. -+ (see the example below) -+ -+ - #address-cells: Must be set to 1 -+ - #size-cells: Must be set to 1 -+ - ranges: Must be set up to reflect the memory layout with four -+ integer values for each chip-select line in use: -+ 0 -+ -+Mandatory timing properties for child nodes: -+ -+Read parameters: -+ -+ - devbus,turn-off-ps: Defines the time during which the controller does not -+ drive the AD bus after the completion of a device read. -+ This prevents contentions on the Device Bus after a read -+ cycle from a slow device. -+ -+ - devbus,bus-width: Defines the bus width (e.g. <16>) -+ -+ - devbus,badr-skew-ps: Defines the time delay from from A[2:0] toggle, -+ to read data sample. This parameter is useful for -+ synchronous pipelined devices, where the address -+ precedes the read data by one or two cycles. -+ -+ - devbus,acc-first-ps: Defines the time delay from the negation of -+ ALE[0] to the cycle that the first read data is sampled -+ by the controller. -+ -+ - devbus,acc-next-ps: Defines the time delay between the cycle that -+ samples data N and the cycle that samples data N+1 -+ (in burst accesses). -+ -+ - devbus,rd-setup-ps: Defines the time delay between DEV_CSn assertion to -+ DEV_OEn assertion. If set to 0 (default), -+ DEV_OEn and DEV_CSn are asserted at the same cycle. -+ This parameter has no affect on parameter -+ (no affect on first data sample). Set -+ to a value smaller than . -+ -+ - devbus,rd-hold-ps: Defines the time between the last data sample to the -+ de-assertion of DEV_CSn. If set to 0 (default), -+ DEV_OEn and DEV_CSn are de-asserted at the same cycle -+ (the cycle of the last data sample). -+ This parameter has no affect on DEV_OEn de-assertion. -+ DEV_OEn is always de-asserted the next cycle after -+ last data sampled. Also this parameter has no -+ affect on parameter. -+ Set to a value smaller than . -+ -+Write parameters: -+ -+ - devbus,ale-wr-ps: Defines the time delay from the ALE[0] negation cycle -+ to the DEV_WEn assertion. -+ -+ - devbus,wr-low-ps: Defines the time during which DEV_WEn is active. -+ A[2:0] and Data are kept valid as long as DEV_WEn -+ is active. This parameter defines the setup time of -+ address and data to DEV_WEn rise. -+ -+ - devbus,wr-high-ps: Defines the time during which DEV_WEn is kept -+ inactive (high) between data beats of a burst write. -+ DEV_A[2:0] and Data are kept valid (do not toggle) for -+ - ps. -+ This parameter defines the hold time of address and -+ data after DEV_WEn rise. -+ -+ - devbus,sync-enable: Synchronous device enable. -+ 1: True -+ 0: False -+ -+An example for an Armada XP GP board, with a 16 MiB NOR device as child -+is showed below. Note that the Device Bus driver is in charge of allocating -+the mbus address decoding window for each of its child devices. -+The window is created using the chip select specified in the child -+device node together with the base address and size specified in the ranges -+property. For instance, in the example below the allocated decoding window -+will start at base address 0xf0000000, with a size 0x1000000 (16 MiB) -+for chip select 0 (a.k.a DEV_BOOTCS). -+ -+This address window handling is done in this mvebu-devbus only as a temporary -+solution. It will be removed when the support for mbus device tree binding is -+added. -+ -+The reg property implicitly specifies the chip select as this: -+ -+ 0x10400: DEV_BOOTCS -+ 0x10408: DEV_CS0 -+ 0x10410: DEV_CS1 -+ 0x10418: DEV_CS2 -+ 0x10420: DEV_CS3 -+ -+Example: -+ -+ devbus-bootcs@d0010400 { -+ status = "okay"; -+ ranges = <0 0xf0000000 0x1000000>; /* @addr 0xf0000000, size 0x1000000 */ -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ /* Device Bus parameters are required */ -+ -+ /* Read parameters */ -+ devbus,bus-width = <8>; -+ devbus,turn-off-ps = <60000>; -+ devbus,badr-skew-ps = <0>; -+ devbus,acc-first-ps = <124000>; -+ devbus,acc-next-ps = <248000>; -+ devbus,rd-setup-ps = <0>; -+ devbus,rd-hold-ps = <0>; -+ -+ /* Write parameters */ -+ devbus,sync-enable = <0>; -+ devbus,wr-high-ps = <60000>; -+ devbus,wr-low-ps = <60000>; -+ devbus,ale-wr-ps = <60000>; -+ -+ flash@0 { -+ compatible = "cfi-flash"; -+ -+ /* 16 MiB */ -+ reg = <0 0x1000000>; -+ bank-width = <2>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ /* -+ * We split the 16 MiB in two partitions, -+ * just as an example. -+ */ -+ partition@0 { -+ label = "First"; -+ reg = <0 0x800000>; -+ }; -+ -+ partition@800000 { -+ label = "Second"; -+ reg = <0x800000 0x800000>; -+ }; -+ }; -+ }; ---- a/drivers/memory/Kconfig -+++ b/drivers/memory/Kconfig -@@ -20,6 +20,16 @@ config TI_EMIF - parameters and other settings during frequency, voltage and - temperature changes - -+config MVEBU_DEVBUS -+ bool "Marvell EBU Device Bus Controller" -+ default y -+ depends on PLAT_ORION && OF -+ help -+ This driver is for the Device Bus controller available in some -+ Marvell EBU SoCs such as Discovery (mv78xx0), Orion (88f5xxx) and -+ Armada 370 and Armada XP. This controller allows to handle flash -+ devices such as NOR, NAND, SRAM, and FPGA. -+ - config TEGRA20_MC - bool "Tegra20 Memory Controller(MC) driver" - default y ---- a/drivers/memory/Makefile -+++ b/drivers/memory/Makefile -@@ -6,5 +6,6 @@ ifeq ($(CONFIG_DDR),y) - obj-$(CONFIG_OF) += of_memory.o - endif - obj-$(CONFIG_TI_EMIF) += emif.o -+obj-$(CONFIG_MVEBU_DEVBUS) += mvebu-devbus.o - obj-$(CONFIG_TEGRA20_MC) += tegra20-mc.o - obj-$(CONFIG_TEGRA30_MC) += tegra30-mc.o ---- /dev/null -+++ b/drivers/memory/mvebu-devbus.c -@@ -0,0 +1,340 @@ -+/* -+ * Marvell EBU SoC Device Bus Controller -+ * (memory controller for NOR/NAND/SRAM/FPGA devices) -+ * -+ * Copyright (C) 2013 Marvell -+ * -+ * This program is free software: you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation version 2 of the License. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see . -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/* Register definitions */ -+#define DEV_WIDTH_BIT 30 -+#define BADR_SKEW_BIT 28 -+#define RD_HOLD_BIT 23 -+#define ACC_NEXT_BIT 17 -+#define RD_SETUP_BIT 12 -+#define ACC_FIRST_BIT 6 -+ -+#define SYNC_ENABLE_BIT 24 -+#define WR_HIGH_BIT 16 -+#define WR_LOW_BIT 8 -+ -+#define READ_PARAM_OFFSET 0x0 -+#define WRITE_PARAM_OFFSET 0x4 -+ -+static const char * const devbus_wins[] = { -+ "devbus-boot", -+ "devbus-cs0", -+ "devbus-cs1", -+ "devbus-cs2", -+ "devbus-cs3", -+}; -+ -+struct devbus_read_params { -+ u32 bus_width; -+ u32 badr_skew; -+ u32 turn_off; -+ u32 acc_first; -+ u32 acc_next; -+ u32 rd_setup; -+ u32 rd_hold; -+}; -+ -+struct devbus_write_params { -+ u32 sync_enable; -+ u32 wr_high; -+ u32 wr_low; -+ u32 ale_wr; -+}; -+ -+struct devbus { -+ struct device *dev; -+ void __iomem *base; -+ unsigned long tick_ps; -+}; -+ -+static int get_timing_param_ps(struct devbus *devbus, -+ struct device_node *node, -+ const char *name, -+ u32 *ticks) -+{ -+ u32 time_ps; -+ int err; -+ -+ err = of_property_read_u32(node, name, &time_ps); -+ if (err < 0) { -+ dev_err(devbus->dev, "%s has no '%s' property\n", -+ name, node->full_name); -+ return err; -+ } -+ -+ *ticks = (time_ps + devbus->tick_ps - 1) / devbus->tick_ps; -+ -+ dev_dbg(devbus->dev, "%s: %u ps -> 0x%x\n", -+ name, time_ps, *ticks); -+ return 0; -+} -+ -+static int devbus_set_timing_params(struct devbus *devbus, -+ struct device_node *node) -+{ -+ struct devbus_read_params r; -+ struct devbus_write_params w; -+ u32 value; -+ int err; -+ -+ dev_dbg(devbus->dev, "Setting timing parameter, tick is %lu ps\n", -+ devbus->tick_ps); -+ -+ /* Get read timings */ -+ err = of_property_read_u32(node, "devbus,bus-width", &r.bus_width); -+ if (err < 0) { -+ dev_err(devbus->dev, -+ "%s has no 'devbus,bus-width' property\n", -+ node->full_name); -+ return err; -+ } -+ /* Convert bit width to byte width */ -+ r.bus_width /= 8; -+ -+ err = get_timing_param_ps(devbus, node, "devbus,badr-skew-ps", -+ &r.badr_skew); -+ if (err < 0) -+ return err; -+ -+ err = get_timing_param_ps(devbus, node, "devbus,turn-off-ps", -+ &r.turn_off); -+ if (err < 0) -+ return err; -+ -+ err = get_timing_param_ps(devbus, node, "devbus,acc-first-ps", -+ &r.acc_first); -+ if (err < 0) -+ return err; -+ -+ err = get_timing_param_ps(devbus, node, "devbus,acc-next-ps", -+ &r.acc_next); -+ if (err < 0) -+ return err; -+ -+ err = get_timing_param_ps(devbus, node, "devbus,rd-setup-ps", -+ &r.rd_setup); -+ if (err < 0) -+ return err; -+ -+ err = get_timing_param_ps(devbus, node, "devbus,rd-hold-ps", -+ &r.rd_hold); -+ if (err < 0) -+ return err; -+ -+ /* Get write timings */ -+ err = of_property_read_u32(node, "devbus,sync-enable", -+ &w.sync_enable); -+ if (err < 0) { -+ dev_err(devbus->dev, -+ "%s has no 'devbus,sync-enable' property\n", -+ node->full_name); -+ return err; -+ } -+ -+ err = get_timing_param_ps(devbus, node, "devbus,ale-wr-ps", -+ &w.ale_wr); -+ if (err < 0) -+ return err; -+ -+ err = get_timing_param_ps(devbus, node, "devbus,wr-low-ps", -+ &w.wr_low); -+ if (err < 0) -+ return err; -+ -+ err = get_timing_param_ps(devbus, node, "devbus,wr-high-ps", -+ &w.wr_high); -+ if (err < 0) -+ return err; -+ -+ /* Set read timings */ -+ value = r.bus_width << DEV_WIDTH_BIT | -+ r.badr_skew << BADR_SKEW_BIT | -+ r.rd_hold << RD_HOLD_BIT | -+ r.acc_next << ACC_NEXT_BIT | -+ r.rd_setup << RD_SETUP_BIT | -+ r.acc_first << ACC_FIRST_BIT | -+ r.turn_off; -+ -+ dev_dbg(devbus->dev, "read parameters register 0x%p = 0x%x\n", -+ devbus->base + READ_PARAM_OFFSET, -+ value); -+ -+ writel(value, devbus->base + READ_PARAM_OFFSET); -+ -+ /* Set write timings */ -+ value = w.sync_enable << SYNC_ENABLE_BIT | -+ w.wr_low << WR_LOW_BIT | -+ w.wr_high << WR_HIGH_BIT | -+ w.ale_wr; -+ -+ dev_dbg(devbus->dev, "write parameters register: 0x%p = 0x%x\n", -+ devbus->base + WRITE_PARAM_OFFSET, -+ value); -+ -+ writel(value, devbus->base + WRITE_PARAM_OFFSET); -+ -+ return 0; -+} -+ -+static int mvebu_devbus_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct device_node *node = pdev->dev.of_node; -+ struct device_node *parent; -+ struct devbus *devbus; -+ struct resource *res; -+ struct clk *clk; -+ unsigned long rate; -+ const __be32 *ranges; -+ int err, cs; -+ int addr_cells, p_addr_cells, size_cells; -+ int ranges_len, tuple_len; -+ u32 base, size; -+ -+ devbus = devm_kzalloc(&pdev->dev, sizeof(struct devbus), GFP_KERNEL); -+ if (!devbus) -+ return -ENOMEM; -+ -+ devbus->dev = dev; -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ devbus->base = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(devbus->base)) -+ return PTR_ERR(devbus->base); -+ -+ clk = devm_clk_get(&pdev->dev, NULL); -+ if (IS_ERR(clk)) -+ return PTR_ERR(clk); -+ clk_prepare_enable(clk); -+ -+ /* -+ * Obtain clock period in picoseconds, -+ * we need this in order to convert timing -+ * parameters from cycles to picoseconds. -+ */ -+ rate = clk_get_rate(clk) / 1000; -+ devbus->tick_ps = 1000000000 / rate; -+ -+ /* Read the device tree node and set the new timing parameters */ -+ err = devbus_set_timing_params(devbus, node); -+ if (err < 0) -+ return err; -+ -+ /* -+ * Allocate an address window for this device. -+ * If the device probing fails, then we won't be able to -+ * remove the allocated address decoding window. -+ * -+ * FIXME: This is only a temporary hack! We need to do this here -+ * because we still don't have device tree bindings for mbus. -+ * Once that support is added, we will declare these address windows -+ * statically in the device tree, and remove the window configuration -+ * from here. -+ */ -+ -+ /* -+ * Get the CS to choose the window string. -+ * This is a bit hacky, but it will be removed once the -+ * address windows are declared in the device tree. -+ */ -+ cs = (((unsigned long)devbus->base) % 0x400) / 8; -+ -+ /* -+ * Parse 'ranges' property to obtain a (base,size) window tuple. -+ * This will be removed once the address windows -+ * are declared in the device tree. -+ */ -+ parent = of_get_parent(node); -+ if (!parent) -+ return -EINVAL; -+ -+ p_addr_cells = of_n_addr_cells(parent); -+ of_node_put(parent); -+ -+ addr_cells = of_n_addr_cells(node); -+ size_cells = of_n_size_cells(node); -+ tuple_len = (p_addr_cells + addr_cells + size_cells) * sizeof(__be32); -+ -+ ranges = of_get_property(node, "ranges", &ranges_len); -+ if (ranges == NULL || ranges_len != tuple_len) -+ return -EINVAL; -+ -+ base = of_translate_address(node, ranges + addr_cells); -+ if (base == OF_BAD_ADDR) -+ return -EINVAL; -+ size = of_read_number(ranges + addr_cells + p_addr_cells, size_cells); -+ -+ /* -+ * Create an mbus address windows. -+ * FIXME: Remove this, together with the above code, once the -+ * address windows are declared in the device tree. -+ */ -+ err = mvebu_mbus_add_window(devbus_wins[cs], base, size); -+ if (err < 0) -+ return err; -+ -+ /* -+ * We need to create a child device explicitly from here to -+ * guarantee that the child will be probed after the timing -+ * parameters for the bus are written. -+ */ -+ err = of_platform_populate(node, NULL, NULL, dev); -+ if (err < 0) { -+ mvebu_mbus_del_window(base, size); -+ return err; -+ } -+ -+ return 0; -+} -+ -+static const struct of_device_id mvebu_devbus_of_match[] = { -+ { .compatible = "marvell,mvebu-devbus" }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, mvebu_devbus_of_match); -+ -+static struct platform_driver mvebu_devbus_driver = { -+ .probe = mvebu_devbus_probe, -+ .driver = { -+ .name = "mvebu-devbus", -+ .owner = THIS_MODULE, -+ .of_match_table = mvebu_devbus_of_match, -+ }, -+}; -+ -+static int __init mvebu_devbus_init(void) -+{ -+ return platform_driver_register(&mvebu_devbus_driver); -+} -+module_init(mvebu_devbus_init); -+ -+MODULE_LICENSE("GPL v2"); -+MODULE_AUTHOR("Ezequiel Garcia "); -+MODULE_DESCRIPTION("Marvell EBU SoC Device Bus controller"); diff --git a/target/linux/mvebu/patches-3.10/0014-arm-mvebu-enable-two-USB-interfaces-on-the-Armada-XP.patch b/target/linux/mvebu/patches-3.10/0014-arm-mvebu-enable-two-USB-interfaces-on-the-Armada-XP.patch deleted file mode 100644 index 120e14d8ed..0000000000 --- a/target/linux/mvebu/patches-3.10/0014-arm-mvebu-enable-two-USB-interfaces-on-the-Armada-XP.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 348fc73a301b88ec3f2da8c1f02858c75e79455e Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Tue, 21 May 2013 19:53:09 +0200 -Subject: [PATCH 014/203] arm: mvebu: enable two USB interfaces on the Armada - XP GP board - -The Armada XP GP board has two USB slots: one on the front side and -one on the back side. This commit enables the two USB host controllers -that correspond to those wo USB slots. - -Signed-off-by: Thomas Petazzoni -Signed-off-by: Jason Cooper ---- - arch/arm/boot/dts/armada-xp-gp.dts | 10 ++++++++++ - 1 file changed, 10 insertions(+) - ---- a/arch/arm/boot/dts/armada-xp-gp.dts -+++ b/arch/arm/boot/dts/armada-xp-gp.dts -@@ -105,6 +105,16 @@ - phy-mode = "rgmii-id"; - }; - -+ /* Front-side USB slot */ -+ usb@50000 { -+ status = "okay"; -+ }; -+ -+ /* Back-side USB slot */ -+ usb@51000 { -+ status = "okay"; -+ }; -+ - spi0: spi@10600 { - status = "okay"; - diff --git a/target/linux/mvebu/patches-3.10/0015-pci-mvebu-no-longer-fake-the-slot-location-of-downst.patch b/target/linux/mvebu/patches-3.10/0015-pci-mvebu-no-longer-fake-the-slot-location-of-downst.patch deleted file mode 100644 index c3dd1f1320..0000000000 --- a/target/linux/mvebu/patches-3.10/0015-pci-mvebu-no-longer-fake-the-slot-location-of-downst.patch +++ /dev/null @@ -1,97 +0,0 @@ -From 34361044442206dd7d10ff3309f8e0713e0fd856 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Thu, 23 May 2013 16:32:51 +0200 -Subject: [PATCH 015/203] pci: mvebu: no longer fake the slot location of - downstream devices - -By default, the Marvell hardware, for each PCIe interface, exhibits -the following devices: - - * On slot 0, a "Marvell Memory controller", identical on all PCIe - interfaces, and which isn't useful when the Marvell SoC is the PCIe - root complex (i.e, the normal case when we run Linux on the Marvell - SoC). - - * On slot 1, the real PCIe card connected into the PCIe slot of the - board. - -So, what the Marvell PCIe driver was doing in its PCI-to-PCI bridge -emulation is that when the Linux PCI core was trying to access the -device in slot 0, we were in fact forwarding the configuration -transaction to the device in slot 1. For all other slots, we were -telling the Linux PCI core that there was no device connected. - -However, new versions of bootloaders from Marvell change the default -PCIe configuration, and make the real device appear in slot 0, and the -"Marvell Memory controller" in slot 1. - -Therefore, this commit modifies the Marvell PCIe driver to adjust the -PCIe hardware configuration to make sure that this behavior (real -device in slot 0, "Marvell Memory controller" in slot 1) is the one -we'll see regardless of what the bootloader has done. It allows to -remove the little hack that was forwarding configuration transactions -on slot 0 to slot 1, which is nice. - -Signed-off-by: Thomas Petazzoni -Acked-by: Bjorn Helgaas -Signed-off-by: Jason Cooper ---- - drivers/pci/host/pci-mvebu.c | 19 +++++++++++++++---- - 1 file changed, 15 insertions(+), 4 deletions(-) - ---- a/drivers/pci/host/pci-mvebu.c -+++ b/drivers/pci/host/pci-mvebu.c -@@ -51,6 +51,7 @@ - #define PCIE_CTRL_X1_MODE 0x0001 - #define PCIE_STAT_OFF 0x1a04 - #define PCIE_STAT_BUS 0xff00 -+#define PCIE_STAT_DEV 0x1f0000 - #define PCIE_STAT_LINK_DOWN BIT(0) - #define PCIE_DEBUG_CTRL 0x1a60 - #define PCIE_DEBUG_SOFT_RESET BIT(20) -@@ -148,6 +149,16 @@ static void mvebu_pcie_set_local_bus_nr( - writel(stat, port->base + PCIE_STAT_OFF); - } - -+static void mvebu_pcie_set_local_dev_nr(struct mvebu_pcie_port *port, int nr) -+{ -+ u32 stat; -+ -+ stat = readl(port->base + PCIE_STAT_OFF); -+ stat &= ~PCIE_STAT_DEV; -+ stat |= nr << 16; -+ writel(stat, port->base + PCIE_STAT_OFF); -+} -+ - /* - * Setup PCIE BARs and Address Decode Wins: - * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks -@@ -572,8 +583,7 @@ static int mvebu_pcie_wr_conf(struct pci - - /* Access the real PCIe interface */ - spin_lock_irqsave(&port->conf_lock, flags); -- ret = mvebu_pcie_hw_wr_conf(port, bus, -- PCI_DEVFN(1, PCI_FUNC(devfn)), -+ ret = mvebu_pcie_hw_wr_conf(port, bus, devfn, - where, size, val); - spin_unlock_irqrestore(&port->conf_lock, flags); - -@@ -606,8 +616,7 @@ static int mvebu_pcie_rd_conf(struct pci - - /* Access the real PCIe interface */ - spin_lock_irqsave(&port->conf_lock, flags); -- ret = mvebu_pcie_hw_rd_conf(port, bus, -- PCI_DEVFN(1, PCI_FUNC(devfn)), -+ ret = mvebu_pcie_hw_rd_conf(port, bus, devfn, - where, size, val); - spin_unlock_irqrestore(&port->conf_lock, flags); - -@@ -817,6 +826,8 @@ static int __init mvebu_pcie_probe(struc - continue; - } - -+ mvebu_pcie_set_local_dev_nr(port, 1); -+ - if (mvebu_pcie_link_up(port)) { - port->haslink = 1; - dev_info(&pdev->dev, "PCIe%d.%d: link up\n", diff --git a/target/linux/mvebu/patches-3.10/0016-pci-mvebu-allow-the-enumeration-of-devices-beyond-ph.patch b/target/linux/mvebu/patches-3.10/0016-pci-mvebu-allow-the-enumeration-of-devices-beyond-ph.patch deleted file mode 100644 index bda383a105..0000000000 --- a/target/linux/mvebu/patches-3.10/0016-pci-mvebu-allow-the-enumeration-of-devices-beyond-ph.patch +++ /dev/null @@ -1,97 +0,0 @@ -From 10f725e3a9e73aab2e5601206c88cf9cbc599243 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Thu, 23 May 2013 16:32:52 +0200 -Subject: [PATCH 016/203] pci: mvebu: allow the enumeration of devices beyond - physical bridges - -Until now, the Marvell PCIe driver was only allowing the enumeration -of the devices in the secondary bus of the emulated PCI-to-PCI -bridge. This works fine when a PCIe device is directly connected into -a PCIe slot of the Marvell board. - -However, when the device connected in the PCIe slot is a physical PCIe -bridge, beyond which a real PCIe device is connected, it no longer -worked, as the driver was preventing the Linux PCI core from seeing -such devices. - -This commit fixes that by ensuring that configuration transactions on -subordinate busses are properly forwarded on the right PCIe interface. - -Thanks to this patch, a PCIe card beyond a PCIe bridge, itself beyond -the emulated PCI-to-PCI bridge is properly detected, with the -following layout: - --[0000:00]-+-01.0-[01]----00.0 - +-09.0-[02-07]----00.0-[03-07]--+-01.0-[04]-- - | +-05.0-[05]-- - | +-07.0-[06]-- - | \-09.0-[07]----00.0 - \-0a.0-[08]----00.0 - -Where the PCIe interface that sits beyond the emulated PCI-to-PCI -bridge at 09.0 allows to access the secondary bus 02, on which there -is a PCIe bridge that allows to access the 3 to 7 busses, that are -subordinates to this bridge. And on one of this bus (bus 7), there is -one real PCIe device connected. - -Signed-off-by: Thomas Petazzoni -Acked-by: Bjorn Helgaas -Signed-off-by: Jason Cooper ---- - drivers/pci/host/pci-mvebu.c | 31 ++++++++++++++++++++++++++++--- - 1 file changed, 28 insertions(+), 3 deletions(-) - ---- a/drivers/pci/host/pci-mvebu.c -+++ b/drivers/pci/host/pci-mvebu.c -@@ -554,7 +554,8 @@ mvebu_pcie_find_port(struct mvebu_pcie * - if (bus->number == 0 && port->devfn == devfn) - return port; - if (bus->number != 0 && -- port->bridge.secondary_bus == bus->number) -+ bus->number >= port->bridge.secondary_bus && -+ bus->number <= port->bridge.subordinate_bus) - return port; - } - -@@ -578,7 +579,18 @@ static int mvebu_pcie_wr_conf(struct pci - if (bus->number == 0) - return mvebu_sw_pci_bridge_write(port, where, size, val); - -- if (!port->haslink || PCI_SLOT(devfn) != 0) -+ if (!port->haslink) -+ return PCIBIOS_DEVICE_NOT_FOUND; -+ -+ /* -+ * On the secondary bus, we don't want to expose any other -+ * device than the device physically connected in the PCIe -+ * slot, visible in slot 0. In slot 1, there's a special -+ * Marvell device that only makes sense when the Armada is -+ * used as a PCIe endpoint. -+ */ -+ if (bus->number == port->bridge.secondary_bus && -+ PCI_SLOT(devfn) != 0) - return PCIBIOS_DEVICE_NOT_FOUND; - - /* Access the real PCIe interface */ -@@ -609,7 +621,20 @@ static int mvebu_pcie_rd_conf(struct pci - if (bus->number == 0) - return mvebu_sw_pci_bridge_read(port, where, size, val); - -- if (!port->haslink || PCI_SLOT(devfn) != 0) { -+ if (!port->haslink) { -+ *val = 0xffffffff; -+ return PCIBIOS_DEVICE_NOT_FOUND; -+ } -+ -+ /* -+ * On the secondary bus, we don't want to expose any other -+ * device than the device physically connected in the PCIe -+ * slot, visible in slot 0. In slot 1, there's a special -+ * Marvell device that only makes sense when the Armada is -+ * used as a PCIe endpoint. -+ */ -+ if (bus->number == port->bridge.secondary_bus && -+ PCI_SLOT(devfn) != 0) { - *val = 0xffffffff; - return PCIBIOS_DEVICE_NOT_FOUND; - } diff --git a/target/linux/mvebu/patches-3.10/0017-pci-mvebu-fix-the-emulation-of-the-status-register.patch b/target/linux/mvebu/patches-3.10/0017-pci-mvebu-fix-the-emulation-of-the-status-register.patch deleted file mode 100644 index 9da0c58f13..0000000000 --- a/target/linux/mvebu/patches-3.10/0017-pci-mvebu-fix-the-emulation-of-the-status-register.patch +++ /dev/null @@ -1,87 +0,0 @@ -From 33e771556f5e1a59c7dbcd953ce858dd3e50ed66 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Thu, 23 May 2013 16:32:53 +0200 -Subject: [PATCH 017/203] pci: mvebu: fix the emulation of the status register - -The status register of the PCI configuration space of PCI-to-PCI -bridges contain some read-only bits, and so write-1-to-clear bits. So, -the Linux PCI core sometimes writes 0xffff to this status register, -and in the current PCI-to-PCI bridge emulation code of the Marvell -driver, we do take all those 1s being written. Even the read-only bits -are being overwritten. - -For now, all the read-only bits should be emulated to have the zero -value. - -The other bits, that are write-1-to-clear bits are used to report -various kind of errors, and are never set by the emulated bridge, so -there is no need to support this write-1-to-clear bits mechanism. - -As a conclusion, the easiest solution is to simply emulate this status -register by returning zero when read, and ignore the writes to it. - -This has two visible effects: - - * The devsel is no longer 'unknown' in, i.e - - Flags: bus master, 66MHz, user-definable features, ?? devsel, latency 0 - - becomes: - - Flags: bus master, 66MHz, user-definable features, fast devsel, latency 0 - - in lspci -v. - - This was caused by a value of 11b being read for devsel, which is - an invalid value. This 11b value being read was due to a previous - write of 0xffff into the status register. - - * The capability list is no longer broken, because we indicate to the - Linux PCI core that we don't have a Capabilities Pointer in the PCI - configuration space of this bridge. The following message is - therefore no longer visible in lspci -v: - - Capabilities: [fc] - -Signed-off-by: Thomas Petazzoni -Acked-by: Bjorn Helgaas -Signed-off-by: Jason Cooper ---- - drivers/pci/host/pci-mvebu.c | 5 +---- - 1 file changed, 1 insertion(+), 4 deletions(-) - ---- a/drivers/pci/host/pci-mvebu.c -+++ b/drivers/pci/host/pci-mvebu.c -@@ -69,7 +69,6 @@ struct mvebu_sw_pci_bridge { - u16 vendor; - u16 device; - u16 command; -- u16 status; - u16 class; - u8 interface; - u8 revision; -@@ -359,7 +358,6 @@ static void mvebu_sw_pci_bridge_init(str - - memset(bridge, 0, sizeof(struct mvebu_sw_pci_bridge)); - -- bridge->status = PCI_STATUS_CAP_LIST; - bridge->class = PCI_CLASS_BRIDGE_PCI; - bridge->vendor = PCI_VENDOR_ID_MARVELL; - bridge->device = MARVELL_EMULATED_PCI_PCI_BRIDGE_ID; -@@ -386,7 +384,7 @@ static int mvebu_sw_pci_bridge_read(stru - break; - - case PCI_COMMAND: -- *value = bridge->status << 16 | bridge->command; -+ *value = bridge->command; - break; - - case PCI_CLASS_REVISION: -@@ -479,7 +477,6 @@ static int mvebu_sw_pci_bridge_write(str - switch (where & ~3) { - case PCI_COMMAND: - bridge->command = value & 0xffff; -- bridge->status = value >> 16; - break; - - case PCI_BASE_ADDRESS_0 ... PCI_BASE_ADDRESS_1: diff --git a/target/linux/mvebu/patches-3.10/0018-arm-mvebu-fix-length-of-SATA-registers-area-in-.dtsi.patch b/target/linux/mvebu/patches-3.10/0018-arm-mvebu-fix-length-of-SATA-registers-area-in-.dtsi.patch deleted file mode 100644 index 5a78cc5113..0000000000 --- a/target/linux/mvebu/patches-3.10/0018-arm-mvebu-fix-length-of-SATA-registers-area-in-.dtsi.patch +++ /dev/null @@ -1,30 +0,0 @@ -From fc7dfe5cd096f5b5343f01f679a96ebc23e9da67 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Tue, 21 May 2013 12:33:26 +0200 -Subject: [PATCH 018/203] arm: mvebu: fix length of SATA registers area in - .dtsi - -The length of the registers area for the Marvell 370/XP SATA -controller was incorrect in the .dtsi: 0x2400 while it should have -been 0x5000. Until now, this problem wasn't noticed because there was -a large static mapping for all I/Os set up by ->map_io(). But since -we're going to get rid of this static mapping, we need to ensure that -the register areas are properly sized. - -Signed-off-by: Thomas Petazzoni -Signed-off-by: Jason Cooper ---- - arch/arm/boot/dts/armada-370-xp.dtsi | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/armada-370-xp.dtsi -+++ b/arch/arm/boot/dts/armada-370-xp.dtsi -@@ -80,7 +80,7 @@ - - sata@a0000 { - compatible = "marvell,orion-sata"; -- reg = <0xa0000 0x2400>; -+ reg = <0xa0000 0x5000>; - interrupts = <55>; - clocks = <&gateclk 15>, <&gateclk 30>; - clock-names = "0", "1"; diff --git a/target/linux/mvebu/patches-3.10/0019-arm-mvebu-fix-length-of-Ethernet-registers-area-in-..patch b/target/linux/mvebu/patches-3.10/0019-arm-mvebu-fix-length-of-Ethernet-registers-area-in-..patch deleted file mode 100644 index 193d87c1ab..0000000000 --- a/target/linux/mvebu/patches-3.10/0019-arm-mvebu-fix-length-of-Ethernet-registers-area-in-..patch +++ /dev/null @@ -1,63 +0,0 @@ -From d887da014c3fabf5fa4da47b143edc069e72fd62 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Tue, 21 May 2013 12:33:27 +0200 -Subject: [PATCH 019/203] arm: mvebu: fix length of Ethernet registers area in - .dtsi - -The length of the registers area for the Marvell 370/XP Ethernet -controller was incorrect in the .dtsi: 0x2400 while it should have -been 0x4000. Until now, this problem wasn't noticed because there was -a large static mapping for all I/Os set up by ->map_io(). But since -we're going to get rid of this static mapping, we need to ensure that -the register areas are properly sized. - -Signed-off-by: Thomas Petazzoni -Signed-off-by: Jason Cooper ---- - arch/arm/boot/dts/armada-370-xp.dtsi | 4 ++-- - arch/arm/boot/dts/armada-xp-mv78460.dtsi | 2 +- - arch/arm/boot/dts/armada-xp.dtsi | 2 +- - 3 files changed, 4 insertions(+), 4 deletions(-) - ---- a/arch/arm/boot/dts/armada-370-xp.dtsi -+++ b/arch/arm/boot/dts/armada-370-xp.dtsi -@@ -96,7 +96,7 @@ - - ethernet@70000 { - compatible = "marvell,armada-370-neta"; -- reg = <0x70000 0x2500>; -+ reg = <0x70000 0x4000>; - interrupts = <8>; - clocks = <&gateclk 4>; - status = "disabled"; -@@ -104,7 +104,7 @@ - - ethernet@74000 { - compatible = "marvell,armada-370-neta"; -- reg = <0x74000 0x2500>; -+ reg = <0x74000 0x4000>; - interrupts = <10>; - clocks = <&gateclk 3>; - status = "disabled"; ---- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi -+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi -@@ -107,7 +107,7 @@ - - ethernet@34000 { - compatible = "marvell,armada-370-neta"; -- reg = <0x34000 0x2500>; -+ reg = <0x34000 0x4000>; - interrupts = <14>; - clocks = <&gateclk 1>; - status = "disabled"; ---- a/arch/arm/boot/dts/armada-xp.dtsi -+++ b/arch/arm/boot/dts/armada-xp.dtsi -@@ -88,7 +88,7 @@ - - ethernet@30000 { - compatible = "marvell,armada-370-neta"; -- reg = <0x30000 0x2500>; -+ reg = <0x30000 0x4000>; - interrupts = <12>; - clocks = <&gateclk 2>; - status = "disabled"; diff --git a/target/linux/mvebu/patches-3.10/0020-net-mvneta-read-MAC-address-from-hardware-when-avail.patch b/target/linux/mvebu/patches-3.10/0020-net-mvneta-read-MAC-address-from-hardware-when-avail.patch deleted file mode 100644 index 9866f0c537..0000000000 --- a/target/linux/mvebu/patches-3.10/0020-net-mvneta-read-MAC-address-from-hardware-when-avail.patch +++ /dev/null @@ -1,112 +0,0 @@ -From 25d3318a445c4f4360f86bf6d1d1a320d9646bb5 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Tue, 4 Jun 2013 04:52:23 +0000 -Subject: [PATCH 020/203] net: mvneta: read MAC address from hardware when - available - -This patch improves the logic used by the mvneta driver to find a MAC -address for a particular interface. Until now, it was only looking at -the Device Tree, and if no address was found, was falling back to -generating a random MAC address. - -This patch adds the intermediate solution of reading the MAC address -from the hardware registers, in case it has been set by the -bootloader. So the order is now: - - 1) MAC address from the Device Tree - 2) MAC address from the hardware registers - 3) Random MAC address - -This requires moving the MAC address initialization a little bit later -in the ->probe() code, because it now requires the hardware registers -to be remapped. - -Signed-off-by: Thomas Petazzoni -Cc: Sergei Shtylyov -Cc: Joe Perches -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/marvell/mvneta.c | 44 ++++++++++++++++++++++++++++------- - 1 file changed, 35 insertions(+), 9 deletions(-) - ---- a/drivers/net/ethernet/marvell/mvneta.c -+++ b/drivers/net/ethernet/marvell/mvneta.c -@@ -2260,6 +2260,21 @@ static int mvneta_change_mtu(struct net_ - return 0; - } - -+/* Get mac address */ -+static void mvneta_get_mac_addr(struct mvneta_port *pp, unsigned char *addr) -+{ -+ u32 mac_addr_l, mac_addr_h; -+ -+ mac_addr_l = mvreg_read(pp, MVNETA_MAC_ADDR_LOW); -+ mac_addr_h = mvreg_read(pp, MVNETA_MAC_ADDR_HIGH); -+ addr[0] = (mac_addr_h >> 24) & 0xFF; -+ addr[1] = (mac_addr_h >> 16) & 0xFF; -+ addr[2] = (mac_addr_h >> 8) & 0xFF; -+ addr[3] = mac_addr_h & 0xFF; -+ addr[4] = (mac_addr_l >> 8) & 0xFF; -+ addr[5] = mac_addr_l & 0xFF; -+} -+ - /* Handle setting mac address */ - static int mvneta_set_mac_addr(struct net_device *dev, void *addr) - { -@@ -2678,7 +2693,9 @@ static int mvneta_probe(struct platform_ - u32 phy_addr; - struct mvneta_port *pp; - struct net_device *dev; -- const char *mac_addr; -+ const char *dt_mac_addr; -+ char hw_mac_addr[ETH_ALEN]; -+ const char *mac_from; - int phy_mode; - int err; - -@@ -2714,13 +2731,6 @@ static int mvneta_probe(struct platform_ - goto err_free_irq; - } - -- mac_addr = of_get_mac_address(dn); -- -- if (!mac_addr || !is_valid_ether_addr(mac_addr)) -- eth_hw_addr_random(dev); -- else -- memcpy(dev->dev_addr, mac_addr, ETH_ALEN); -- - dev->tx_queue_len = MVNETA_MAX_TXD; - dev->watchdog_timeo = 5 * HZ; - dev->netdev_ops = &mvneta_netdev_ops; -@@ -2751,6 +2761,21 @@ static int mvneta_probe(struct platform_ - - clk_prepare_enable(pp->clk); - -+ dt_mac_addr = of_get_mac_address(dn); -+ if (dt_mac_addr && is_valid_ether_addr(dt_mac_addr)) { -+ mac_from = "device tree"; -+ memcpy(dev->dev_addr, dt_mac_addr, ETH_ALEN); -+ } else { -+ mvneta_get_mac_addr(pp, hw_mac_addr); -+ if (is_valid_ether_addr(hw_mac_addr)) { -+ mac_from = "hardware"; -+ memcpy(dev->dev_addr, hw_mac_addr, ETH_ALEN); -+ } else { -+ mac_from = "random"; -+ eth_hw_addr_random(dev); -+ } -+ } -+ - pp->tx_done_timer.data = (unsigned long)dev; - - pp->tx_ring_size = MVNETA_MAX_TXD; -@@ -2783,7 +2808,8 @@ static int mvneta_probe(struct platform_ - goto err_deinit; - } - -- netdev_info(dev, "mac: %pM\n", dev->dev_addr); -+ netdev_info(dev, "Using %s mac address %pM\n", mac_from, -+ dev->dev_addr); - - platform_set_drvdata(pdev, pp->dev); - diff --git a/target/linux/mvebu/patches-3.10/0021-arm-mvebu-armada-xp-db-ensure-PCIe-range-is-specifie.patch b/target/linux/mvebu/patches-3.10/0021-arm-mvebu-armada-xp-db-ensure-PCIe-range-is-specifie.patch deleted file mode 100644 index a57b6c8d06..0000000000 --- a/target/linux/mvebu/patches-3.10/0021-arm-mvebu-armada-xp-db-ensure-PCIe-range-is-specifie.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 67373874e07eb8c54ab27f8fe9998690e50b1e91 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Thu, 6 Jun 2013 11:21:23 +0200 -Subject: [PATCH 021/203] arm: mvebu: armada-xp-db: ensure PCIe range is - specified - -The ranges DT entry needed by the PCIe controller is defined at the -SoC .dtsi level. However, some boards have a NOR flash, and to support -it, they need to override the SoC-level ranges property to add an -additional range. Since PCIe and NOR support came separately, some -boards were not properly changed to include the PCIe range in their -ranges property at the .dts level. - -This commit fixes those platforms. - -Signed-off-by: Thomas Petazzoni -Signed-off-by: Jason Cooper ---- - arch/arm/boot/dts/armada-xp-db.dts | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm/boot/dts/armada-xp-db.dts -+++ b/arch/arm/boot/dts/armada-xp-db.dts -@@ -31,6 +31,7 @@ - - soc { - ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */ -+ 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */ - 0xf0000000 0 0xf0000000 0x1000000>; /* Device Bus, NOR 16MiB */ - - internal-regs { diff --git a/target/linux/mvebu/patches-3.10/0022-bus-mvebu-mbus-Use-pr_fmt.patch b/target/linux/mvebu/patches-3.10/0022-bus-mvebu-mbus-Use-pr_fmt.patch deleted file mode 100644 index ab2e7b469b..0000000000 --- a/target/linux/mvebu/patches-3.10/0022-bus-mvebu-mbus-Use-pr_fmt.patch +++ /dev/null @@ -1,54 +0,0 @@ -From 35e8d985e056f583290406258e3f17789bd05bce Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Fri, 7 Jun 2013 13:47:38 -0300 -Subject: [PATCH 022/203] bus: mvebu-mbus: Use pr_fmt - -In order to clean message printing, we replace pr_info with pr_fmt. -This is purely cosmetic change, with the sole purpose of making -the code a bit more readable. - -Signed-off-by: Ezequiel Garcia -Acked-by: Thomas Petazzoni -Signed-off-by: Jason Cooper ---- - drivers/bus/mvebu-mbus.c | 8 +++++--- - 1 file changed, 5 insertions(+), 3 deletions(-) - ---- a/drivers/bus/mvebu-mbus.c -+++ b/drivers/bus/mvebu-mbus.c -@@ -49,6 +49,8 @@ - * configuration (file 'devices'). - */ - -+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt -+ - #include - #include - #include -@@ -762,7 +764,7 @@ int mvebu_mbus_add_window_remap_flags(co - break; - - if (!s->soc->map[i].name) { -- pr_err("mvebu-mbus: unknown device '%s'\n", devname); -+ pr_err("unknown device '%s'\n", devname); - return -ENODEV; - } - -@@ -775,7 +777,7 @@ int mvebu_mbus_add_window_remap_flags(co - attr |= 0x28; - - if (!mvebu_mbus_window_conflicts(s, base, size, target, attr)) { -- pr_err("mvebu-mbus: cannot add window '%s', conflicts with another window\n", -+ pr_err("cannot add window '%s', conflicts with another window\n", - devname); - return -EINVAL; - } -@@ -842,7 +844,7 @@ int __init mvebu_mbus_init(const char *s - break; - - if (!of_id->compatible) { -- pr_err("mvebu-mbus: could not find a matching SoC family\n"); -+ pr_err("could not find a matching SoC family\n"); - return -ENODEV; - } - diff --git a/target/linux/mvebu/patches-3.10/0023-ARM-mvebu-Remove-device-tree-unused-properties-on-A3.patch b/target/linux/mvebu/patches-3.10/0023-ARM-mvebu-Remove-device-tree-unused-properties-on-A3.patch deleted file mode 100644 index 39270c758c..0000000000 --- a/target/linux/mvebu/patches-3.10/0023-ARM-mvebu-Remove-device-tree-unused-properties-on-A3.patch +++ /dev/null @@ -1,28 +0,0 @@ -From df8ceea297967c3452a514bbde715acebf3bda29 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Fri, 7 Jun 2013 13:47:49 -0300 -Subject: [PATCH 023/203] ARM: mvebu: Remove device tree unused properties on - A370 - -These properties are not needed so it's safe to remove them. - -Signed-off-by: Ezequiel Garcia -Acked-by: Thomas Petazzoni -Signed-off-by: Jason Cooper ---- - arch/arm/boot/dts/armada-370.dtsi | 4 ---- - 1 file changed, 4 deletions(-) - ---- a/arch/arm/boot/dts/armada-370.dtsi -+++ b/arch/arm/boot/dts/armada-370.dtsi -@@ -180,10 +180,6 @@ - - bus-range = <0x00 0xff>; - -- reg = <0x40000 0x2000>, <0x80000 0x2000>; -- -- reg-names = "pcie0.0", "pcie1.0"; -- - ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ - 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ diff --git a/target/linux/mvebu/patches-3.10/0024-arm-mvebu-remove-dependency-of-SMP-init-on-static-I-.patch b/target/linux/mvebu/patches-3.10/0024-arm-mvebu-remove-dependency-of-SMP-init-on-static-I-.patch deleted file mode 100644 index 38c908fb8c..0000000000 --- a/target/linux/mvebu/patches-3.10/0024-arm-mvebu-remove-dependency-of-SMP-init-on-static-I-.patch +++ /dev/null @@ -1,99 +0,0 @@ -From 9398729313b826469fede3acda5fedd1eb21cb3e Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Wed, 5 Jun 2013 09:04:54 +0200 -Subject: [PATCH 024/203] arm: mvebu: remove dependency of SMP init on static - I/O mapping - -The ->smp_init_cpus() function is called very early during boot, at a -point where dynamic I/O mappings are not yet possible. However, in the -Armada 370/XP implementation of this function, we have to get the -number of CPUs. We used to do that by accessing a hardware register, -which requires relying on a static I/O mapping set up by -->map_io(). Not only this requires hardcoding a virtual address, but -it also prevents us from removing the static I/O mapping. - -So this commit changes the way used to get the number of CPUs: we now -use the Device Tree, which is a representation of the hardware, and -provides us the number of available CPUs. This is also more accurate, -because it potentially allows to boot the Linux kernel on only a -number of CPUs given by the Device Tree, instead of unconditionally on -all CPUs. - -As a consequence, the coherency_get_cpu_count() function becomes no -longer used, so we remove it. - -Signed-off-by: Thomas Petazzoni -Acked-by: Arnd Bergmann -Signed-off-by: Jason Cooper ---- - arch/arm/mach-mvebu/coherency.c | 12 ------------ - arch/arm/mach-mvebu/coherency.h | 4 ---- - arch/arm/mach-mvebu/common.h | 2 ++ - arch/arm/mach-mvebu/platsmp.c | 10 +++++++++- - 4 files changed, 11 insertions(+), 17 deletions(-) - ---- a/arch/arm/mach-mvebu/coherency.c -+++ b/arch/arm/mach-mvebu/coherency.c -@@ -47,18 +47,6 @@ static struct of_device_id of_coherency_ - { /* end of list */ }, - }; - --#ifdef CONFIG_SMP --int coherency_get_cpu_count(void) --{ -- int reg, cnt; -- -- reg = readl(coherency_base + COHERENCY_FABRIC_CFG_OFFSET); -- cnt = (reg & 0xF) + 1; -- -- return cnt; --} --#endif -- - /* Function defined in coherency_ll.S */ - int ll_set_cpu_coherent(void __iomem *base_addr, unsigned int hw_cpu_id); - ---- a/arch/arm/mach-mvebu/coherency.h -+++ b/arch/arm/mach-mvebu/coherency.h -@@ -14,10 +14,6 @@ - #ifndef __MACH_370_XP_COHERENCY_H - #define __MACH_370_XP_COHERENCY_H - --#ifdef CONFIG_SMP --int coherency_get_cpu_count(void); --#endif -- - int set_cpu_coherent(int cpu_id, int smp_group_id); - int coherency_init(void); - ---- a/arch/arm/mach-mvebu/common.h -+++ b/arch/arm/mach-mvebu/common.h -@@ -15,6 +15,8 @@ - #ifndef __ARCH_MVEBU_COMMON_H - #define __ARCH_MVEBU_COMMON_H - -+#define ARMADA_XP_MAX_CPUS 4 -+ - void mvebu_restart(char mode, const char *cmd); - - void armada_370_xp_init_irq(void); ---- a/arch/arm/mach-mvebu/platsmp.c -+++ b/arch/arm/mach-mvebu/platsmp.c -@@ -88,8 +88,16 @@ static int __cpuinit armada_xp_boot_seco - - static void __init armada_xp_smp_init_cpus(void) - { -+ struct device_node *np; - unsigned int i, ncores; -- ncores = coherency_get_cpu_count(); -+ -+ np = of_find_node_by_name(NULL, "cpus"); -+ if (!np) -+ panic("No 'cpus' node found\n"); -+ -+ ncores = of_get_child_count(np); -+ if (ncores == 0 || ncores > ARMADA_XP_MAX_CPUS) -+ panic("Invalid number of CPUs in DT\n"); - - /* Limit possible CPUs to defconfig */ - if (ncores > nr_cpu_ids) { diff --git a/target/linux/mvebu/patches-3.10/0025-arm-mvebu-avoid-hardcoded-virtual-address-in-coheren.patch b/target/linux/mvebu/patches-3.10/0025-arm-mvebu-avoid-hardcoded-virtual-address-in-coheren.patch deleted file mode 100644 index b6c3722e34..0000000000 --- a/target/linux/mvebu/patches-3.10/0025-arm-mvebu-avoid-hardcoded-virtual-address-in-coheren.patch +++ /dev/null @@ -1,81 +0,0 @@ -From a4dd628f515f361cecfae08e568891442042e4e2 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Wed, 5 Jun 2013 09:04:55 +0200 -Subject: [PATCH 025/203] arm: mvebu: avoid hardcoded virtual address in - coherency code - -Now that the coherency_get_cpu_count() function no longer requires a -very early mapping of the coherency unit registers, we can avoid the -hardcoded virtual address in coherency.c. However, the coherency -features are still used quite early, so we need to do the of_iomap() -early enough, at the ->init_timer() level, so we have the call of -coherency_init() at this point. - -Unfortunately, at ->init_timer() time, it is not possible to register -a bus notifier, so we add a separate coherency_late_init() function -that gets called as as postcore_initcall(), when bus notifiers are -available. - -Signed-off-by: Thomas Petazzoni -Acked-by: Arnd Bergmann -Signed-off-by: Jason Cooper ---- - arch/arm/mach-mvebu/armada-370-xp.c | 2 +- - arch/arm/mach-mvebu/coherency.c | 20 ++++++++++---------- - 2 files changed, 11 insertions(+), 11 deletions(-) - ---- a/arch/arm/mach-mvebu/armada-370-xp.c -+++ b/arch/arm/mach-mvebu/armada-370-xp.c -@@ -47,6 +47,7 @@ static void __init armada_370_xp_timer_a - { - mvebu_clocks_init(); - armada_370_xp_timer_init(); -+ coherency_init(); - } - - static void __init armada_370_xp_init_early(void) -@@ -76,7 +77,6 @@ static void __init armada_370_xp_init_ea - static void __init armada_370_xp_dt_init(void) - { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -- coherency_init(); - } - - static const char * const armada_370_xp_dt_compat[] = { ---- a/arch/arm/mach-mvebu/coherency.c -+++ b/arch/arm/mach-mvebu/coherency.c -@@ -27,14 +27,7 @@ - #include - #include "armada-370-xp.h" - --/* -- * Some functions in this file are called very early during SMP -- * initialization. At that time the device tree framework is not yet -- * ready, and it is not possible to get the register address to -- * ioremap it. That's why the pointer below is given with an initial -- * value matching its virtual mapping -- */ --static void __iomem *coherency_base = ARMADA_370_XP_REGS_VIRT_BASE + 0x20200; -+static void __iomem *coherency_base; - static void __iomem *coherency_cpu_base; - - /* Coherency fabric registers */ -@@ -135,9 +128,16 @@ int __init coherency_init(void) - coherency_base = of_iomap(np, 0); - coherency_cpu_base = of_iomap(np, 1); - set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0); -- bus_register_notifier(&platform_bus_type, -- &mvebu_hwcc_platform_nb); - } - - return 0; - } -+ -+static int __init coherency_late_init(void) -+{ -+ bus_register_notifier(&platform_bus_type, -+ &mvebu_hwcc_platform_nb); -+ return 0; -+} -+ -+postcore_initcall(coherency_late_init); diff --git a/target/linux/mvebu/patches-3.10/0026-arm-mvebu-move-cache-and-mvebu-mbus-initialization-l.patch b/target/linux/mvebu/patches-3.10/0026-arm-mvebu-move-cache-and-mvebu-mbus-initialization-l.patch deleted file mode 100644 index de2ed7377c..0000000000 --- a/target/linux/mvebu/patches-3.10/0026-arm-mvebu-move-cache-and-mvebu-mbus-initialization-l.patch +++ /dev/null @@ -1,54 +0,0 @@ -From c7c7e6309ae12f2cb0d9053875876b57bb7587e4 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Wed, 5 Jun 2013 09:04:56 +0200 -Subject: [PATCH 026/203] arm: mvebu: move cache and mvebu-mbus initialization - later - -Current, the L2 cache and the mvebu-mbus drivers are initialized at -->init_early() time. However, at ->init_early() time, ioremap() only -works if a static I/O mapping has already been put in place. If it's -not the case, it tries to do a memory allocation with kmalloc() which -is not possible so early at this stage of the initialization. - -Since we want to get rid of the static I/O mapping, we cannot -initialize the L2 cache driver and the mvebu-mbus driver so early. So, -we move their initialization to the ->init_time() level, which is -slightly later (so ioremap() works properly), but sufficiently early -to be before the call of the ->smp_prepare_cpus() hook, which creates -an address decoding window for the BootROM, which requires the -mvebu-mbus driver to be properly initialized. - -Signed-off-by: Thomas Petazzoni -Acked-by: Arnd Bergmann -Signed-off-by: Jason Cooper ---- - arch/arm/mach-mvebu/armada-370-xp.c | 8 ++------ - 1 file changed, 2 insertions(+), 6 deletions(-) - ---- a/arch/arm/mach-mvebu/armada-370-xp.c -+++ b/arch/arm/mach-mvebu/armada-370-xp.c -@@ -45,14 +45,11 @@ static void __init armada_370_xp_map_io( - - static void __init armada_370_xp_timer_and_clk_init(void) - { -+ char *mbus_soc_name; -+ - mvebu_clocks_init(); - armada_370_xp_timer_init(); - coherency_init(); --} -- --static void __init armada_370_xp_init_early(void) --{ -- char *mbus_soc_name; - - /* - * This initialization will be replaced by a DT-based -@@ -88,7 +85,6 @@ DT_MACHINE_START(ARMADA_XP_DT, "Marvell - .smp = smp_ops(armada_xp_smp_ops), - .init_machine = armada_370_xp_dt_init, - .map_io = armada_370_xp_map_io, -- .init_early = armada_370_xp_init_early, - .init_irq = irqchip_init, - .init_time = armada_370_xp_timer_and_clk_init, - .restart = mvebu_restart, diff --git a/target/linux/mvebu/patches-3.10/0027-arm-mvebu-remove-hardcoded-static-I-O-mapping.patch b/target/linux/mvebu/patches-3.10/0027-arm-mvebu-remove-hardcoded-static-I-O-mapping.patch deleted file mode 100644 index 78905927d0..0000000000 --- a/target/linux/mvebu/patches-3.10/0027-arm-mvebu-remove-hardcoded-static-I-O-mapping.patch +++ /dev/null @@ -1,52 +0,0 @@ -From fe4fce3c521f5d9f3a64c4d06a73a5e6b7324116 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Wed, 5 Jun 2013 09:04:57 +0200 -Subject: [PATCH 027/203] arm: mvebu: remove hardcoded static I/O mapping - -Now that we have removed the need of the static I/O mapping for early -initialization reasons, and fixed the registers area length that were -broken, we can get rid of the static I/O mapping. Only the earlyprintk -mapping needs to be set up, using the debug_ll_io_init() helper -function. - -Signed-off-by: Thomas Petazzoni -Acked-by: Arnd Bergmann -Signed-off-by: Jason Cooper ---- - arch/arm/mach-mvebu/armada-370-xp.c | 11 +---------- - arch/arm/mach-mvebu/armada-370-xp.h | 2 -- - 2 files changed, 1 insertion(+), 12 deletions(-) - ---- a/arch/arm/mach-mvebu/armada-370-xp.c -+++ b/arch/arm/mach-mvebu/armada-370-xp.c -@@ -29,18 +29,9 @@ - #include "common.h" - #include "coherency.h" - --static struct map_desc armada_370_xp_io_desc[] __initdata = { -- { -- .virtual = (unsigned long) ARMADA_370_XP_REGS_VIRT_BASE, -- .pfn = __phys_to_pfn(ARMADA_370_XP_REGS_PHYS_BASE), -- .length = ARMADA_370_XP_REGS_SIZE, -- .type = MT_DEVICE, -- }, --}; -- - static void __init armada_370_xp_map_io(void) - { -- iotable_init(armada_370_xp_io_desc, ARRAY_SIZE(armada_370_xp_io_desc)); -+ debug_ll_io_init(); - } - - static void __init armada_370_xp_timer_and_clk_init(void) ---- a/arch/arm/mach-mvebu/armada-370-xp.h -+++ b/arch/arm/mach-mvebu/armada-370-xp.h -@@ -16,8 +16,6 @@ - #define __MACH_ARMADA_370_XP_H - - #define ARMADA_370_XP_REGS_PHYS_BASE 0xd0000000 --#define ARMADA_370_XP_REGS_VIRT_BASE IOMEM(0xfec00000) --#define ARMADA_370_XP_REGS_SIZE SZ_1M - - /* These defines can go away once mvebu-mbus has a DT binding */ - #define ARMADA_370_XP_MBUS_WINS_BASE (ARMADA_370_XP_REGS_PHYS_BASE + 0x20000) diff --git a/target/linux/mvebu/patches-3.10/0028-arm-mvebu-don-t-hardcode-a-physical-address-in-heads.patch b/target/linux/mvebu/patches-3.10/0028-arm-mvebu-don-t-hardcode-a-physical-address-in-heads.patch deleted file mode 100644 index af98e9dae8..0000000000 --- a/target/linux/mvebu/patches-3.10/0028-arm-mvebu-don-t-hardcode-a-physical-address-in-heads.patch +++ /dev/null @@ -1,91 +0,0 @@ -From 88260610ea7a2c5a164721af28f59856880221b4 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Thu, 6 Jun 2013 12:24:28 +0200 -Subject: [PATCH 028/203] arm: mvebu: don't hardcode a physical address in - headsmp.S - -Now that the coherency_init() function is called a bit earlier, we can -actually read the physical address of the coherency unit registers -from the Device Tree, and communicate that to the headsmp.S code, -which avoids hardcoding a physical address. - -Signed-off-by: Thomas Petazzoni -Acked-by: Arnd Bergmann -Reviewed-by: Will Deacon -Acked-by: Nicolas Pitre -Signed-off-by: Jason Cooper ---- - arch/arm/mach-mvebu/coherency.c | 12 ++++++++++++ - arch/arm/mach-mvebu/headsmp.S | 16 ++++++++-------- - 2 files changed, 20 insertions(+), 8 deletions(-) - ---- a/arch/arm/mach-mvebu/coherency.c -+++ b/arch/arm/mach-mvebu/coherency.c -@@ -25,8 +25,10 @@ - #include - #include - #include -+#include - #include "armada-370-xp.h" - -+unsigned long __cpuinitdata coherency_phys_base; - static void __iomem *coherency_base; - static void __iomem *coherency_cpu_base; - -@@ -124,7 +126,17 @@ int __init coherency_init(void) - - np = of_find_matching_node(NULL, of_coherency_table); - if (np) { -+ struct resource res; - pr_info("Initializing Coherency fabric\n"); -+ of_address_to_resource(np, 0, &res); -+ coherency_phys_base = res.start; -+ /* -+ * Ensure secondary CPUs will see the updated value, -+ * which they read before they join the coherency -+ * fabric, and therefore before they are coherent with -+ * the boot CPU cache. -+ */ -+ sync_cache_w(&coherency_phys_base); - coherency_base = of_iomap(np, 0); - coherency_cpu_base = of_iomap(np, 1); - set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0); ---- a/arch/arm/mach-mvebu/headsmp.S -+++ b/arch/arm/mach-mvebu/headsmp.S -@@ -21,12 +21,6 @@ - #include - #include - --/* -- * At this stage the secondary CPUs don't have acces yet to the MMU, so -- * we have to provide physical addresses -- */ --#define ARMADA_XP_CFB_BASE 0xD0020200 -- - __CPUINIT - - /* -@@ -35,15 +29,21 @@ - * startup - */ - ENTRY(armada_xp_secondary_startup) -+ /* Get coherency fabric base physical address */ -+ adr r0, 1f -+ ldr r1, [r0] -+ ldr r0, [r0, r1] - - /* Read CPU id */ - mrc p15, 0, r1, c0, c0, 5 - and r1, r1, #0xF - - /* Add CPU to coherency fabric */ -- ldr r0, =ARMADA_XP_CFB_BASE -- - bl ll_set_cpu_coherent - b secondary_startup - - ENDPROC(armada_xp_secondary_startup) -+ -+ .align 2 -+1: -+ .long coherency_phys_base - . diff --git a/target/linux/mvebu/patches-3.10/0029-arm-mvebu-don-t-hardcode-the-physical-address-for-mv.patch b/target/linux/mvebu/patches-3.10/0029-arm-mvebu-don-t-hardcode-the-physical-address-for-mv.patch deleted file mode 100644 index 62c6bcbead..0000000000 --- a/target/linux/mvebu/patches-3.10/0029-arm-mvebu-don-t-hardcode-the-physical-address-for-mv.patch +++ /dev/null @@ -1,109 +0,0 @@ -From 070469397154c87b14fab48d2fc231ba83007c1b Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Wed, 5 Jun 2013 09:04:59 +0200 -Subject: [PATCH 029/203] arm: mvebu: don't hardcode the physical address for - mvebu-mbus - -Since the mvebu-mbus driver doesn't yet have a DT binding (and this DT -binding may not necessarily be ready for 3.11), the physical address -of the mvebu-mbus registers are currently hardcoded. This doesn't play -well with the fact that the internal registers base address may be -different depending on the bootloader. - -In order to have only one central place for the physical address of -the internal registers, we now use of_translate_address() to translate -the mvebu-mbus register offsets into the real physical address, by -using DT-based address translation. This will go away once the -mvebu-mbus driver gains a proper DT binding. - -Signed-off-by: Thomas Petazzoni -Acked-by: Arnd Bergmann -Signed-off-by: Jason Cooper ---- - arch/arm/mach-mvebu/armada-370-xp.c | 38 ++++++++++++++++++++++++++----------- - arch/arm/mach-mvebu/armada-370-xp.h | 8 -------- - 2 files changed, 27 insertions(+), 19 deletions(-) - ---- a/arch/arm/mach-mvebu/armada-370-xp.c -+++ b/arch/arm/mach-mvebu/armada-370-xp.c -@@ -14,6 +14,7 @@ - - #include - #include -+#include - #include - #include - #include -@@ -34,29 +35,44 @@ static void __init armada_370_xp_map_io( - debug_ll_io_init(); - } - --static void __init armada_370_xp_timer_and_clk_init(void) -+/* -+ * This initialization will be replaced by a DT-based -+ * initialization once the mvebu-mbus driver gains DT support. -+ */ -+ -+#define ARMADA_370_XP_MBUS_WINS_OFFS 0x20000 -+#define ARMADA_370_XP_MBUS_WINS_SIZE 0x100 -+#define ARMADA_370_XP_SDRAM_WINS_OFFS 0x20180 -+#define ARMADA_370_XP_SDRAM_WINS_SIZE 0x20 -+ -+static void __init armada_370_xp_mbus_init(void) - { - char *mbus_soc_name; -+ struct device_node *dn; -+ const __be32 mbus_wins_offs = cpu_to_be32(ARMADA_370_XP_MBUS_WINS_OFFS); -+ const __be32 sdram_wins_offs = cpu_to_be32(ARMADA_370_XP_SDRAM_WINS_OFFS); - -- mvebu_clocks_init(); -- armada_370_xp_timer_init(); -- coherency_init(); -- -- /* -- * This initialization will be replaced by a DT-based -- * initialization once the mvebu-mbus driver gains DT support. -- */ - if (of_machine_is_compatible("marvell,armada370")) - mbus_soc_name = "marvell,armada370-mbus"; - else - mbus_soc_name = "marvell,armadaxp-mbus"; - -+ dn = of_find_node_by_name(NULL, "internal-regs"); -+ BUG_ON(!dn); -+ - mvebu_mbus_init(mbus_soc_name, -- ARMADA_370_XP_MBUS_WINS_BASE, -+ of_translate_address(dn, &mbus_wins_offs), - ARMADA_370_XP_MBUS_WINS_SIZE, -- ARMADA_370_XP_SDRAM_WINS_BASE, -+ of_translate_address(dn, &sdram_wins_offs), - ARMADA_370_XP_SDRAM_WINS_SIZE); -+} - -+static void __init armada_370_xp_timer_and_clk_init(void) -+{ -+ mvebu_clocks_init(); -+ armada_370_xp_timer_init(); -+ coherency_init(); -+ armada_370_xp_mbus_init(); - #ifdef CONFIG_CACHE_L2X0 - l2x0_of_init(0, ~0UL); - #endif ---- a/arch/arm/mach-mvebu/armada-370-xp.h -+++ b/arch/arm/mach-mvebu/armada-370-xp.h -@@ -15,14 +15,6 @@ - #ifndef __MACH_ARMADA_370_XP_H - #define __MACH_ARMADA_370_XP_H - --#define ARMADA_370_XP_REGS_PHYS_BASE 0xd0000000 -- --/* These defines can go away once mvebu-mbus has a DT binding */ --#define ARMADA_370_XP_MBUS_WINS_BASE (ARMADA_370_XP_REGS_PHYS_BASE + 0x20000) --#define ARMADA_370_XP_MBUS_WINS_SIZE 0x100 --#define ARMADA_370_XP_SDRAM_WINS_BASE (ARMADA_370_XP_REGS_PHYS_BASE + 0x20180) --#define ARMADA_370_XP_SDRAM_WINS_SIZE 0x20 -- - #ifdef CONFIG_SMP - #include - diff --git a/target/linux/mvebu/patches-3.10/0030-arm-mvebu-add-another-earlyprintk-Kconfig-option.patch b/target/linux/mvebu/patches-3.10/0030-arm-mvebu-add-another-earlyprintk-Kconfig-option.patch deleted file mode 100644 index 7faeb986a0..0000000000 --- a/target/linux/mvebu/patches-3.10/0030-arm-mvebu-add-another-earlyprintk-Kconfig-option.patch +++ /dev/null @@ -1,85 +0,0 @@ -From 70c30ca997919a4b8c9051a3903f30c79c735f12 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Wed, 5 Jun 2013 09:05:00 +0200 -Subject: [PATCH 030/203] arm: mvebu: add another earlyprintk Kconfig option - -In order to support both old and new bootloaders, we add a new Kconfig -option for the earlyprintk UART selection. The existing option allows -to work with old bootloaders (that keep the internal registers mapped -at 0xd0000000), while the newly introduced option allows to work with -new bootloaders (that remap the internal registers at 0xf1000000). - -Signed-off-by: Thomas Petazzoni -Acked-by: Arnd Bergmann -Signed-off-by: Jason Cooper ---- - arch/arm/Kconfig.debug | 30 ++++++++++++++++++++++++++++-- - arch/arm/include/debug/mvebu.S | 5 +++++ - 2 files changed, 33 insertions(+), 2 deletions(-) - ---- a/arch/arm/Kconfig.debug -+++ b/arch/arm/Kconfig.debug -@@ -303,12 +303,37 @@ choice - their output to the serial port on MSM 8960 devices. - - config DEBUG_MVEBU_UART -- bool "Kernel low-level debugging messages via MVEBU UART" -+ bool "Kernel low-level debugging messages via MVEBU UART (old bootloaders)" - depends on ARCH_MVEBU - help - Say Y here if you want kernel low-level debugging support - on MVEBU based platforms. - -+ This option should be used with the old bootloaders -+ that left the internal registers mapped at -+ 0xd0000000. As of today, this is the case on -+ platforms such as the Globalscale Mirabox or the -+ Plathome OpenBlocks AX3, when using the original -+ bootloader. -+ -+ If the wrong DEBUG_MVEBU_UART* option is selected, -+ when u-boot hands over to the kernel, the system -+ silently crashes, with no serial output at all. -+ -+ config DEBUG_MVEBU_UART_ALTERNATE -+ bool "Kernel low-level debugging messages via MVEBU UART (new bootloaders)" -+ depends on ARCH_MVEBU -+ help -+ Say Y here if you want kernel low-level debugging support -+ on MVEBU based platforms. -+ -+ This option should be used with the new bootloaders -+ that remap the internal registers at 0xf1000000. -+ -+ If the wrong DEBUG_MVEBU_UART* option is selected, -+ when u-boot hands over to the kernel, the system -+ silently crashes, with no serial output at all. -+ - config DEBUG_NOMADIK_UART - bool "Kernel low-level debugging messages via NOMADIK UART" - depends on ARCH_NOMADIK -@@ -632,7 +657,8 @@ config DEBUG_LL_INCLUDE - DEBUG_IMX51_UART || \ - DEBUG_IMX53_UART ||\ - DEBUG_IMX6Q_UART -- default "debug/mvebu.S" if DEBUG_MVEBU_UART -+ default "debug/mvebu.S" if DEBUG_MVEBU_UART || \ -+ DEBUG_MVEBU_UART_ALTERNATE - default "debug/mxs.S" if DEBUG_IMX23_UART || DEBUG_IMX28_UART - default "debug/nomadik.S" if DEBUG_NOMADIK_UART - default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART ---- a/arch/arm/include/debug/mvebu.S -+++ b/arch/arm/include/debug/mvebu.S -@@ -11,7 +11,12 @@ - * published by the Free Software Foundation. - */ - -+#ifdef CONFIG_DEBUG_MVEBU_UART_ALTERNATE -+#define ARMADA_370_XP_REGS_PHYS_BASE 0xf1000000 -+#else - #define ARMADA_370_XP_REGS_PHYS_BASE 0xd0000000 -+#endif -+ - #define ARMADA_370_XP_REGS_VIRT_BASE 0xfec00000 - - .macro addruart, rp, rv, tmp diff --git a/target/linux/mvebu/patches-3.10/0031-arm-mvebu-disable-DEBUG_LL-EARLY_PRINTK-in-defconfig.patch b/target/linux/mvebu/patches-3.10/0031-arm-mvebu-disable-DEBUG_LL-EARLY_PRINTK-in-defconfig.patch deleted file mode 100644 index e1e2e6233f..0000000000 --- a/target/linux/mvebu/patches-3.10/0031-arm-mvebu-disable-DEBUG_LL-EARLY_PRINTK-in-defconfig.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 7a3b99b8d16f2eb9ae5ac4ddf5e201eacdfacbf4 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Wed, 5 Jun 2013 09:05:01 +0200 -Subject: [PATCH 031/203] arm: mvebu: disable DEBUG_LL/EARLY_PRINTK in - defconfig - -Now that we have two different addresses for the UART, depending on -which bootloader is used, it is no longer desirable to enable -earlyprintk by default in the defconfig. Users who need earlyprintk -support will have to enable it explicitly, and select the right UART -configuration depending on their platform. - -Signed-off-by: Thomas Petazzoni -Acked-by: Arnd Bergmann -Signed-off-by: Jason Cooper ---- - arch/arm/configs/mvebu_defconfig | 2 -- - 1 file changed, 2 deletions(-) - ---- a/arch/arm/configs/mvebu_defconfig -+++ b/arch/arm/configs/mvebu_defconfig -@@ -100,5 +100,3 @@ CONFIG_TIMER_STATS=y - # CONFIG_DEBUG_BUGVERBOSE is not set - CONFIG_DEBUG_INFO=y - CONFIG_DEBUG_USER=y --CONFIG_DEBUG_LL=y --CONFIG_EARLY_PRINTK=y diff --git a/target/linux/mvebu/patches-3.10/0032-arm-mvebu-enable-mini-PCIe-connectors-on-Armada-370-.patch b/target/linux/mvebu/patches-3.10/0032-arm-mvebu-enable-mini-PCIe-connectors-on-Armada-370-.patch deleted file mode 100644 index 81ab352d9f..0000000000 --- a/target/linux/mvebu/patches-3.10/0032-arm-mvebu-enable-mini-PCIe-connectors-on-Armada-370-.patch +++ /dev/null @@ -1,42 +0,0 @@ -From e552d168344e941a1781682207269dbfd27850b1 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Tue, 18 Jun 2013 15:37:41 +0200 -Subject: [PATCH 032/203] arm: mvebu: enable mini-PCIe connectors on Armada 370 - RD - -The Armada 370 RD board has two internal mini-PCIe connectors. This -commit adds the necessary Device Tree informations to enable the usage -of those mini-PCIe connectors. - -Signed-off-by: Thomas Petazzoni -Cc: Florian Fainelli -Signed-off-by: Jason Cooper ---- - arch/arm/boot/dts/armada-370-rd.dts | 16 ++++++++++++++++ - 1 file changed, 16 insertions(+) - ---- a/arch/arm/boot/dts/armada-370-rd.dts -+++ b/arch/arm/boot/dts/armada-370-rd.dts -@@ -85,6 +85,22 @@ - gpios = <&gpio0 6 1>; - }; - }; -+ -+ pcie-controller { -+ status = "okay"; -+ -+ /* Internal mini-PCIe connector */ -+ pcie@1,0 { -+ /* Port 0, Lane 0 */ -+ status = "okay"; -+ }; -+ -+ /* Internal mini-PCIe connector */ -+ pcie@2,0 { -+ /* Port 1, Lane 0 */ -+ status = "okay"; -+ }; -+ }; - }; - }; - }; diff --git a/target/linux/mvebu/patches-3.10/0033-arm-mvebu-fix-coherency_late_init-for-multiplatform.patch b/target/linux/mvebu/patches-3.10/0033-arm-mvebu-fix-coherency_late_init-for-multiplatform.patch deleted file mode 100644 index 21fad3e856..0000000000 --- a/target/linux/mvebu/patches-3.10/0033-arm-mvebu-fix-coherency_late_init-for-multiplatform.patch +++ /dev/null @@ -1,41 +0,0 @@ -From 3891658a01af7e875d4c176ebb5d713d74a6e998 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Thu, 20 Jun 2013 09:45:26 +0200 -Subject: [PATCH 033/203] arm: mvebu: fix coherency_late_init() for - multiplatform - -As noticed by Arnaud Patard (Rtp) , commit -865e0527d2d7 ('arm: mvebu: avoid hardcoded virtual address in -coherency code') added a postcore_initcall() to register the bus -notifier that the mvebu code needs to apply correct DMA operations on -its platform devices breaks the multiplatform boot on other platforms, -because the bus notifier registration is unconditional. - -This commit fixes that by registering the bus notifier only if we have -the mvebu coherency unit described in the Device Tree. The conditional -used is exactly the same in which the bus_register_notifier() call was -originally enclosed before 865e0527d2d7 ('arm: mvebu: avoid hardcoded -virtual address in coherency code'). - -Signed-off-by: Thomas Petazzoni -Reported-by: Arnaud Patard (Rtp) -Acked-by: Andrew Lunn -Signed-off-by: Jason Cooper ---- - arch/arm/mach-mvebu/coherency.c | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - ---- a/arch/arm/mach-mvebu/coherency.c -+++ b/arch/arm/mach-mvebu/coherency.c -@@ -147,8 +147,9 @@ int __init coherency_init(void) - - static int __init coherency_late_init(void) - { -- bus_register_notifier(&platform_bus_type, -- &mvebu_hwcc_platform_nb); -+ if (of_find_matching_node(NULL, of_coherency_table)) -+ bus_register_notifier(&platform_bus_type, -+ &mvebu_hwcc_platform_nb); - return 0; - } - diff --git a/target/linux/mvebu/patches-3.10/0034-ARM-mvebu-fix-length-of-ethernet-registers-in-mv7826.patch b/target/linux/mvebu/patches-3.10/0034-ARM-mvebu-fix-length-of-ethernet-registers-in-mv7826.patch deleted file mode 100644 index 6ee5835943..0000000000 --- a/target/linux/mvebu/patches-3.10/0034-ARM-mvebu-fix-length-of-ethernet-registers-in-mv7826.patch +++ /dev/null @@ -1,53 +0,0 @@ -From 4f6da1286d2602e00c049c29eb9e816587c752a5 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Sat, 22 Jun 2013 13:52:27 -0300 -Subject: [PATCH 034/203] ARM: mvebu: fix length of ethernet registers in - mv78260 dtsi - -The length of the registers area for the Marvell 370/XP Ethernet controller -was incorrect in the .dtsi: 0x2500, while it should have been 0x4000. -This problem wasn't noticed because there used to be a static mapping for -all the MMIO register region set up by ->map_io(). - -The register length was fixed in all the other device tree files, -except from the armada-xp-mv78260.dtsi, in the following commit: - - commit cf8088c5cac6ce20d914b9131533844b9291a054 - Author: Thomas Petazzoni - Date: Tue May 21 12:33:27 2013 +0200 - - arm: mvebu: fix length of Ethernet registers area in .dtsi - -This commit fixes a kernel panic in mvneta_probe(), when the kernel -tries to access the unmapped registers: - -[ 163.639092] mvneta d0070000.ethernet eth0: mac: 6e:3c:4f:87:17:2e -[ 163.646962] mvneta d0074000.ethernet eth1: mac: 6a:04:4e:6f:f5:ef -[ 163.654853] mvneta d0030000.ethernet eth2: mac: 2a:99:19:19:fc:4c -[ 163.661258] Unable to handle kernel paging request at virtual address f011bcf0 -[ 163.668523] pgd = c0004000 -[ 163.671237] [f011bcf0] *pgd=2f006811, *pte=00000000, *ppte=00000000 -[ 163.677565] Internal error: Oops: 807 [#1] SMP ARM -[ 163.682370] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0-rc6-01850-gba0682e #11 -[ 163.690046] task: ef04c000 ti: ef03e000 task.ti: ef03e000 -[ 163.695467] PC is at mvneta_probe+0x34c/0xabc -[...] - -Signed-off-by: Ezequiel Garcia -Acked-by: Thomas Petazzoni -Signed-off-by: Jason Cooper ---- - arch/arm/boot/dts/armada-xp-mv78260.dtsi | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi -+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi -@@ -92,7 +92,7 @@ - - ethernet@34000 { - compatible = "marvell,armada-370-neta"; -- reg = <0x34000 0x2500>; -+ reg = <0x34000 0x4000>; - interrupts = <14>; - clocks = <&gateclk 1>; - status = "disabled"; diff --git a/target/linux/mvebu/patches-3.10/0035-i2c-mv64xxx-Set-bus-frequency-to-100kHz-if-clock-fre.patch b/target/linux/mvebu/patches-3.10/0035-i2c-mv64xxx-Set-bus-frequency-to-100kHz-if-clock-fre.patch deleted file mode 100644 index 4de7da9828..0000000000 --- a/target/linux/mvebu/patches-3.10/0035-i2c-mv64xxx-Set-bus-frequency-to-100kHz-if-clock-fre.patch +++ /dev/null @@ -1,51 +0,0 @@ -From 76de914223ec09274a7857e0d8cd7b739205dc3c Mon Sep 17 00:00:00 2001 -From: Gregory CLEMENT -Date: Fri, 21 Jun 2013 15:32:06 +0200 -Subject: [PATCH 035/203] i2c: mv64xxx: Set bus frequency to 100kHz if - clock-frequency is not provided - -This commit adds checking whether clock-frequency property acquisition -has succeeded. If not, the frequency is set to 100kHz by default. - -The Device Tree binding documentation is updated accordingly. - -Based on the intials patches from Zbigniew Bodek - -Signed-off-by: Gregory CLEMENT -Signed-off-by: Zbigniew Bodek -Signed-off-by: Wolfram Sang ---- - Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt | 6 +++++- - drivers/i2c/busses/i2c-mv64xxx.c | 6 +++++- - 2 files changed, 10 insertions(+), 2 deletions(-) - ---- a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt -+++ b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt -@@ -6,7 +6,11 @@ Required properties : - - reg : Offset and length of the register set for the device - - compatible : Should be "marvell,mv64xxx-i2c" - - interrupts : The interrupt number -- - clock-frequency : Desired I2C bus clock frequency in Hz. -+ -+Optional properties : -+ -+ - clock-frequency : Desired I2C bus clock frequency in Hz. If not set the -+default frequency is 100kHz - - Examples: - ---- a/drivers/i2c/busses/i2c-mv64xxx.c -+++ b/drivers/i2c/busses/i2c-mv64xxx.c -@@ -580,7 +580,11 @@ mv64xxx_of_config(struct mv64xxx_i2c_dat - goto out; - } - tclk = clk_get_rate(drv_data->clk); -- of_property_read_u32(np, "clock-frequency", &bus_freq); -+ -+ rc = of_property_read_u32(np, "clock-frequency", &bus_freq); -+ if (rc) -+ bus_freq = 100000; /* 100kHz by default */ -+ - if (!mv64xxx_find_baud_factors(bus_freq, tclk, - &drv_data->freq_n, &drv_data->freq_m)) { - rc = -EINVAL; diff --git a/target/linux/mvebu/patches-3.10/0036-PCI-mvebu-Disable-prefetchable-memory-support-in-PCI.patch b/target/linux/mvebu/patches-3.10/0036-PCI-mvebu-Disable-prefetchable-memory-support-in-PCI.patch deleted file mode 100644 index afb104a581..0000000000 --- a/target/linux/mvebu/patches-3.10/0036-PCI-mvebu-Disable-prefetchable-memory-support-in-PCI.patch +++ /dev/null @@ -1,91 +0,0 @@ -From 71a32c9519ba223d1dafcbe58d1699710720c5a8 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Thu, 1 Aug 2013 15:44:19 +0200 -Subject: [PATCH 036/203] PCI: mvebu: Disable prefetchable memory support in - PCI-to-PCI bridge - -The Marvell PCIe driver uses an emulated PCI-to-PCI bridge to be able -to dynamically set up MBus address decoding windows for PCI I/O and -memory regions depending on the PCI devices enumerated by Linux. - -However, this emulated PCI-to-PCI bridge logic makes the Linux PCI -core believe that prefetchable memory regions are supported (because -the registers are read/write), while in fact no adress decoding window -is ever created for such regions. Since the Marvell MBus address -decoding windows do not distinguish memory regions and prefetchable -memory regions, this patch takes a simple approach: change the -PCI-to-PCI bridge emulation to let the Linux PCI core know that we -don't support prefetchable memory regions. - -To achieve this, we simply make the prefetchable memory base a -read-only register that always returns 0. Reading/writing all the -other prefetchable memory related registers has no effect. - -This problem was originally reported by Finn Hoffmann -, who couldn't get a RTL8111/8168B PCI NIC working -on the NSA310 Kirkwood platform after updating to 3.11-rc. The problem -was that the PCI-to-PCI bridge emulation was making the Linux PCI core -believe that we support prefetchable memory, so the Linux PCI core was -only filling the prefetchable memory base and limit registers, which -does not lead to a MBus window being created. The below patch has been -confirmed by Finn Hoffmann to fix his problem on Kirkwood, and has -otherwise been successfully tested on the Armada XP GP platform with a -e1000e PCIe NIC and a Marvell SATA PCIe card. - -Reported-by: Finn Hoffmann -Signed-off-by: Thomas Petazzoni -Signed-off-by: Bjorn Helgaas ---- - drivers/pci/host/pci-mvebu.c | 27 +-------------------------- - 1 file changed, 1 insertion(+), 26 deletions(-) - ---- a/drivers/pci/host/pci-mvebu.c -+++ b/drivers/pci/host/pci-mvebu.c -@@ -86,10 +86,6 @@ struct mvebu_sw_pci_bridge { - u16 secondary_status; - u16 membase; - u16 memlimit; -- u16 prefmembase; -- u16 prefmemlimit; -- u32 prefbaseupper; -- u32 preflimitupper; - u16 iobaseupper; - u16 iolimitupper; - u8 cappointer; -@@ -419,15 +415,7 @@ static int mvebu_sw_pci_bridge_read(stru - break; - - case PCI_PREF_MEMORY_BASE: -- *value = (bridge->prefmemlimit << 16 | bridge->prefmembase); -- break; -- -- case PCI_PREF_BASE_UPPER32: -- *value = bridge->prefbaseupper; -- break; -- -- case PCI_PREF_LIMIT_UPPER32: -- *value = bridge->preflimitupper; -+ *value = 0; - break; - - case PCI_IO_BASE_UPPER16: -@@ -501,19 +489,6 @@ static int mvebu_sw_pci_bridge_write(str - mvebu_pcie_handle_membase_change(port); - break; - -- case PCI_PREF_MEMORY_BASE: -- bridge->prefmembase = value & 0xffff; -- bridge->prefmemlimit = value >> 16; -- break; -- -- case PCI_PREF_BASE_UPPER32: -- bridge->prefbaseupper = value; -- break; -- -- case PCI_PREF_LIMIT_UPPER32: -- bridge->preflimitupper = value; -- break; -- - case PCI_IO_BASE_UPPER16: - bridge->iobaseupper = value & 0xffff; - bridge->iolimitupper = value >> 16; diff --git a/target/linux/mvebu/patches-3.10/0037-memory-mvebu-devbus-Remove-address-decoding-window-w.patch b/target/linux/mvebu/patches-3.10/0037-memory-mvebu-devbus-Remove-address-decoding-window-w.patch deleted file mode 100644 index 1983016ddf..0000000000 --- a/target/linux/mvebu/patches-3.10/0037-memory-mvebu-devbus-Remove-address-decoding-window-w.patch +++ /dev/null @@ -1,109 +0,0 @@ -From 9760aafa716292050a96d71a4bd7bd4e66053975 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Tue, 21 May 2013 10:24:48 -0300 -Subject: [PATCH 037/203] memory: mvebu-devbus: Remove address decoding window - workaround - -Now that mbus device tree binding has been introduced, remove the address -decoding window management from this driver. -A suitable 'ranges' entry should be added to the devbus-compatible node in -the device tree, as described by the mbus binding documentation. - -Acked-by: Greg Kroah-Hartman -Signed-off-by: Ezequiel Garcia -Tested-by: Andrew Lunn -Tested-by: Sebastian Hesselbarth ---- - drivers/memory/mvebu-devbus.c | 64 ++----------------------------------------- - 1 file changed, 2 insertions(+), 62 deletions(-) - ---- a/drivers/memory/mvebu-devbus.c -+++ b/drivers/memory/mvebu-devbus.c -@@ -208,16 +208,11 @@ static int mvebu_devbus_probe(struct pla - { - struct device *dev = &pdev->dev; - struct device_node *node = pdev->dev.of_node; -- struct device_node *parent; - struct devbus *devbus; - struct resource *res; - struct clk *clk; - unsigned long rate; -- const __be32 *ranges; -- int err, cs; -- int addr_cells, p_addr_cells, size_cells; -- int ranges_len, tuple_len; -- u32 base, size; -+ int err; - - devbus = devm_kzalloc(&pdev->dev, sizeof(struct devbus), GFP_KERNEL); - if (!devbus) -@@ -248,68 +243,13 @@ static int mvebu_devbus_probe(struct pla - return err; - - /* -- * Allocate an address window for this device. -- * If the device probing fails, then we won't be able to -- * remove the allocated address decoding window. -- * -- * FIXME: This is only a temporary hack! We need to do this here -- * because we still don't have device tree bindings for mbus. -- * Once that support is added, we will declare these address windows -- * statically in the device tree, and remove the window configuration -- * from here. -- */ -- -- /* -- * Get the CS to choose the window string. -- * This is a bit hacky, but it will be removed once the -- * address windows are declared in the device tree. -- */ -- cs = (((unsigned long)devbus->base) % 0x400) / 8; -- -- /* -- * Parse 'ranges' property to obtain a (base,size) window tuple. -- * This will be removed once the address windows -- * are declared in the device tree. -- */ -- parent = of_get_parent(node); -- if (!parent) -- return -EINVAL; -- -- p_addr_cells = of_n_addr_cells(parent); -- of_node_put(parent); -- -- addr_cells = of_n_addr_cells(node); -- size_cells = of_n_size_cells(node); -- tuple_len = (p_addr_cells + addr_cells + size_cells) * sizeof(__be32); -- -- ranges = of_get_property(node, "ranges", &ranges_len); -- if (ranges == NULL || ranges_len != tuple_len) -- return -EINVAL; -- -- base = of_translate_address(node, ranges + addr_cells); -- if (base == OF_BAD_ADDR) -- return -EINVAL; -- size = of_read_number(ranges + addr_cells + p_addr_cells, size_cells); -- -- /* -- * Create an mbus address windows. -- * FIXME: Remove this, together with the above code, once the -- * address windows are declared in the device tree. -- */ -- err = mvebu_mbus_add_window(devbus_wins[cs], base, size); -- if (err < 0) -- return err; -- -- /* - * We need to create a child device explicitly from here to - * guarantee that the child will be probed after the timing - * parameters for the bus are written. - */ - err = of_platform_populate(node, NULL, NULL, dev); -- if (err < 0) { -- mvebu_mbus_del_window(base, size); -+ if (err < 0) - return err; -- } - - return 0; - } diff --git a/target/linux/mvebu/patches-3.10/0038-bus-mvebu-mbus-Add-new-API-for-window-creation.patch b/target/linux/mvebu/patches-3.10/0038-bus-mvebu-mbus-Add-new-API-for-window-creation.patch deleted file mode 100644 index 4ebb3f3216..0000000000 --- a/target/linux/mvebu/patches-3.10/0038-bus-mvebu-mbus-Add-new-API-for-window-creation.patch +++ /dev/null @@ -1,90 +0,0 @@ -From 93b6bd1bf81cffd3e5739478c4434bf25458ec7d Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Fri, 5 Jul 2013 14:54:16 +0200 -Subject: [PATCH 038/203] bus: mvebu-mbus: Add new API for window creation - -We add an API to create MBus address decoding windows from the target -ID and attribute. This function will be used later and deprecate the -current name based scheme. - -Signed-off-by: Thomas Petazzoni -Tested-by: Andrew Lunn -Tested-by: Sebastian Hesselbarth ---- - drivers/bus/mvebu-mbus.c | 33 +++++++++++++++++++++++++-------- - include/linux/mbus.h | 6 ++++++ - 2 files changed, 31 insertions(+), 8 deletions(-) - ---- a/drivers/bus/mvebu-mbus.c -+++ b/drivers/bus/mvebu-mbus.c -@@ -748,6 +748,22 @@ static const struct of_device_id of_mveb - /* - * Public API of the driver - */ -+int mvebu_mbus_add_window_remap_by_id(unsigned int target, -+ unsigned int attribute, -+ phys_addr_t base, size_t size, -+ phys_addr_t remap) -+{ -+ struct mvebu_mbus_state *s = &mbus_state; -+ -+ if (!mvebu_mbus_window_conflicts(s, base, size, target, attribute)) { -+ pr_err("cannot add window '%x:%x', conflicts with another window\n", -+ target, attribute); -+ return -EINVAL; -+ } -+ -+ return mvebu_mbus_alloc_window(s, base, size, remap, target, attribute); -+} -+ - int mvebu_mbus_add_window_remap_flags(const char *devname, phys_addr_t base, - size_t size, phys_addr_t remap, - unsigned int flags) -@@ -776,14 +792,8 @@ int mvebu_mbus_add_window_remap_flags(co - else if (flags == MVEBU_MBUS_PCI_WA) - attr |= 0x28; - -- if (!mvebu_mbus_window_conflicts(s, base, size, target, attr)) { -- pr_err("cannot add window '%s', conflicts with another window\n", -- devname); -- return -EINVAL; -- } -- -- return mvebu_mbus_alloc_window(s, base, size, remap, target, attr); -- -+ return mvebu_mbus_add_window_remap_by_id(target, attr, base, -+ size, remap); - } - - int mvebu_mbus_add_window(const char *devname, phys_addr_t base, size_t size) -@@ -792,6 +802,13 @@ int mvebu_mbus_add_window(const char *de - MVEBU_MBUS_NO_REMAP, 0); - } - -+int mvebu_mbus_add_window_by_id(unsigned int target, unsigned int attribute, -+ phys_addr_t base, size_t size) -+{ -+ return mvebu_mbus_add_window_remap_by_id(target, attribute, base, -+ size, MVEBU_MBUS_NO_REMAP); -+} -+ - int mvebu_mbus_del_window(phys_addr_t base, size_t size) - { - int win; ---- a/include/linux/mbus.h -+++ b/include/linux/mbus.h -@@ -62,8 +62,14 @@ static inline const struct mbus_dram_tar - int mvebu_mbus_add_window_remap_flags(const char *devname, phys_addr_t base, - size_t size, phys_addr_t remap, - unsigned int flags); -+int mvebu_mbus_add_window_remap_by_id(unsigned int target, -+ unsigned int attribute, -+ phys_addr_t base, size_t size, -+ phys_addr_t remap); - int mvebu_mbus_add_window(const char *devname, phys_addr_t base, - size_t size); -+int mvebu_mbus_add_window_by_id(unsigned int target, unsigned int attribute, -+ phys_addr_t base, size_t size); - int mvebu_mbus_del_window(phys_addr_t base, size_t size); - int mvebu_mbus_init(const char *soc, phys_addr_t mbus_phys_base, - size_t mbus_size, phys_addr_t sdram_phys_base, diff --git a/target/linux/mvebu/patches-3.10/0043-bus-mvebu-mbus-Factor-out-initialization-details.patch b/target/linux/mvebu/patches-3.10/0043-bus-mvebu-mbus-Factor-out-initialization-details.patch deleted file mode 100644 index e6a9032f15..0000000000 --- a/target/linux/mvebu/patches-3.10/0043-bus-mvebu-mbus-Factor-out-initialization-details.patch +++ /dev/null @@ -1,81 +0,0 @@ -From 5be79ea0d2bcec8c7360cfe3e7a491e5f176fa84 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Tue, 21 May 2013 10:44:54 -0300 -Subject: [PATCH 043/203] bus: mvebu-mbus: Factor out initialization details - -We introduce a common initialization function mvebu_mbus_common_init() -that will be used by both legacy and device-tree initialization code. -This patch is an intermediate step, which will allow to introduce the -DT binding for this driver in a less intrusive way. - -Signed-off-by: Thomas Petazzoni -Signed-off-by: Ezequiel Garcia -Tested-by: Andrew Lunn -Tested-by: Sebastian Hesselbarth ---- - drivers/bus/mvebu-mbus.c | 47 ++++++++++++++++++++++++++++++----------------- - 1 file changed, 30 insertions(+), 17 deletions(-) - ---- a/drivers/bus/mvebu-mbus.c -+++ b/drivers/bus/mvebu-mbus.c -@@ -847,26 +847,14 @@ static __init int mvebu_mbus_debugfs_ini - } - fs_initcall(mvebu_mbus_debugfs_init); - --int __init mvebu_mbus_init(const char *soc, phys_addr_t mbuswins_phys_base, -- size_t mbuswins_size, -- phys_addr_t sdramwins_phys_base, -- size_t sdramwins_size) -+static int __init mvebu_mbus_common_init(struct mvebu_mbus_state *mbus, -+ phys_addr_t mbuswins_phys_base, -+ size_t mbuswins_size, -+ phys_addr_t sdramwins_phys_base, -+ size_t sdramwins_size) - { -- struct mvebu_mbus_state *mbus = &mbus_state; -- const struct of_device_id *of_id; - int win; - -- for (of_id = of_mvebu_mbus_ids; of_id->compatible; of_id++) -- if (!strcmp(of_id->compatible, soc)) -- break; -- -- if (!of_id->compatible) { -- pr_err("could not find a matching SoC family\n"); -- return -ENODEV; -- } -- -- mbus->soc = of_id->data; -- - mbus->mbuswins_base = ioremap(mbuswins_phys_base, mbuswins_size); - if (!mbus->mbuswins_base) - return -ENOMEM; -@@ -887,3 +875,28 @@ int __init mvebu_mbus_init(const char *s - - return 0; - } -+ -+int __init mvebu_mbus_init(const char *soc, phys_addr_t mbuswins_phys_base, -+ size_t mbuswins_size, -+ phys_addr_t sdramwins_phys_base, -+ size_t sdramwins_size) -+{ -+ const struct of_device_id *of_id; -+ -+ for (of_id = of_mvebu_mbus_ids; of_id->compatible; of_id++) -+ if (!strcmp(of_id->compatible, soc)) -+ break; -+ -+ if (!of_id->compatible) { -+ pr_err("could not find a matching SoC family\n"); -+ return -ENODEV; -+ } -+ -+ mbus_state.soc = of_id->data; -+ -+ return mvebu_mbus_common_init(&mbus_state, -+ mbuswins_phys_base, -+ mbuswins_size, -+ sdramwins_phys_base, -+ sdramwins_size); -+} diff --git a/target/linux/mvebu/patches-3.10/0044-bus-mvebu-mbus-Introduce-device-tree-binding.patch b/target/linux/mvebu/patches-3.10/0044-bus-mvebu-mbus-Introduce-device-tree-binding.patch deleted file mode 100644 index ef2d1b4792..0000000000 --- a/target/linux/mvebu/patches-3.10/0044-bus-mvebu-mbus-Introduce-device-tree-binding.patch +++ /dev/null @@ -1,83 +0,0 @@ -From e4123095febc94c547c0459db752e7879db79d76 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Tue, 21 May 2013 10:48:54 -0300 -Subject: [PATCH 044/203] bus: mvebu-mbus: Introduce device tree binding - -This patch adds the most fundamental device-tree initialization. -We only introduce what's required to be able to probe the mvebu-mbus -driver from the DT. Follow-up patches will extend the device tree binding, -allowing to describe static address decoding windows. - -Signed-off-by: Thomas Petazzoni -Signed-off-by: Ezequiel Garcia -Tested-by: Andrew Lunn -Tested-by: Sebastian Hesselbarth ---- - drivers/bus/mvebu-mbus.c | 49 ++++++++++++++++++++++++++++++++++++++++++++++++ - include/linux/mbus.h | 1 + - 2 files changed, 50 insertions(+) - ---- a/drivers/bus/mvebu-mbus.c -+++ b/drivers/bus/mvebu-mbus.c -@@ -900,3 +900,52 @@ int __init mvebu_mbus_init(const char *s - sdramwins_phys_base, - sdramwins_size); - } -+ -+#ifdef CONFIG_OF -+int __init mvebu_mbus_dt_init(void) -+{ -+ struct resource mbuswins_res, sdramwins_res; -+ struct device_node *np, *controller; -+ const struct of_device_id *of_id; -+ const __be32 *prop; -+ int ret; -+ -+ np = of_find_matching_node(NULL, of_mvebu_mbus_ids); -+ if (!np) { -+ pr_err("could not find a matching SoC family\n"); -+ return -ENODEV; -+ } -+ -+ of_id = of_match_node(of_mvebu_mbus_ids, np); -+ mbus_state.soc = of_id->data; -+ -+ prop = of_get_property(np, "controller", NULL); -+ if (!prop) { -+ pr_err("required 'controller' property missing\n"); -+ return -EINVAL; -+ } -+ -+ controller = of_find_node_by_phandle(be32_to_cpup(prop)); -+ if (!controller) { -+ pr_err("could not find an 'mbus-controller' node\n"); -+ return -ENODEV; -+ } -+ -+ if (of_address_to_resource(controller, 0, &mbuswins_res)) { -+ pr_err("cannot get MBUS register address\n"); -+ return -EINVAL; -+ } -+ -+ if (of_address_to_resource(controller, 1, &sdramwins_res)) { -+ pr_err("cannot get SDRAM register address\n"); -+ return -EINVAL; -+ } -+ -+ ret = mvebu_mbus_common_init(&mbus_state, -+ mbuswins_res.start, -+ resource_size(&mbuswins_res), -+ sdramwins_res.start, -+ resource_size(&sdramwins_res)); -+ return ret; -+} -+#endif ---- a/include/linux/mbus.h -+++ b/include/linux/mbus.h -@@ -74,5 +74,6 @@ int mvebu_mbus_del_window(phys_addr_t ba - int mvebu_mbus_init(const char *soc, phys_addr_t mbus_phys_base, - size_t mbus_size, phys_addr_t sdram_phys_base, - size_t sdram_size); -+int mvebu_mbus_dt_init(void); - - #endif /* __LINUX_MBUS_H */ diff --git a/target/linux/mvebu/patches-3.10/0045-bus-mvebu-mbus-Add-static-window-allocation-to-the-D.patch b/target/linux/mvebu/patches-3.10/0045-bus-mvebu-mbus-Add-static-window-allocation-to-the-D.patch deleted file mode 100644 index d9e783a481..0000000000 --- a/target/linux/mvebu/patches-3.10/0045-bus-mvebu-mbus-Add-static-window-allocation-to-the-D.patch +++ /dev/null @@ -1,160 +0,0 @@ -From ece28a7e105cedb5a9ebd2553aa41d965fb83b64 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Tue, 28 May 2013 07:58:31 -0300 -Subject: [PATCH 045/203] bus: mvebu-mbus: Add static window allocation to the - DT binding - -This patch adds static window allocation to the device tree binding. -Each first-child of the mbus-compatible node, with a suitable 'ranges' -property, declaring an address translation, will trigger an address -decoding window allocation. - -Signed-off-by: Ezequiel Garcia -Tested-by: Andrew Lunn -Tested-by: Sebastian Hesselbarth ---- - drivers/bus/mvebu-mbus.c | 127 ++++++++++++++++++++++++++++++++++++++++++++++- - 1 file changed, 126 insertions(+), 1 deletion(-) - ---- a/drivers/bus/mvebu-mbus.c -+++ b/drivers/bus/mvebu-mbus.c -@@ -902,6 +902,127 @@ int __init mvebu_mbus_init(const char *s - } - - #ifdef CONFIG_OF -+/* -+ * The window IDs in the ranges DT property have the following format: -+ * - bits 28 to 31: MBus custom field -+ * - bits 24 to 27: window target ID -+ * - bits 16 to 23: window attribute ID -+ * - bits 0 to 15: unused -+ */ -+#define CUSTOM(id) (((id) & 0xF0000000) >> 24) -+#define TARGET(id) (((id) & 0x0F000000) >> 24) -+#define ATTR(id) (((id) & 0x00FF0000) >> 16) -+ -+static int __init mbus_dt_setup_win(struct mvebu_mbus_state *mbus, -+ u32 base, u32 size, -+ u8 target, u8 attr) -+{ -+ const struct mvebu_mbus_mapping *map = mbus->soc->map; -+ const char *name; -+ int i; -+ -+ /* Search for a suitable window in the existing mappings */ -+ for (i = 0; map[i].name; i++) -+ if (map[i].target == target && -+ map[i].attr == (attr & map[i].attrmask)) -+ break; -+ -+ name = map[i].name; -+ if (!name) { -+ pr_err("window 0x%x:0x%x is unknown, skipping\n", -+ target, attr); -+ return -EINVAL; -+ } -+ -+ if (!mvebu_mbus_window_conflicts(mbus, base, size, target, attr)) { -+ pr_err("cannot add window '%s', conflicts with another window\n", -+ name); -+ return -EBUSY; -+ } -+ -+ if (mvebu_mbus_alloc_window(mbus, base, size, MVEBU_MBUS_NO_REMAP, -+ target, attr)) { -+ pr_err("cannot add window '%s', too many windows\n", -+ name); -+ return -ENOMEM; -+ } -+ return 0; -+} -+ -+static int __init -+mbus_parse_ranges(struct device_node *node, -+ int *addr_cells, int *c_addr_cells, int *c_size_cells, -+ int *cell_count, const __be32 **ranges_start, -+ const __be32 **ranges_end) -+{ -+ const __be32 *prop; -+ int ranges_len, tuple_len; -+ -+ /* Allow a node with no 'ranges' property */ -+ *ranges_start = of_get_property(node, "ranges", &ranges_len); -+ if (*ranges_start == NULL) { -+ *addr_cells = *c_addr_cells = *c_size_cells = *cell_count = 0; -+ *ranges_start = *ranges_end = NULL; -+ return 0; -+ } -+ *ranges_end = *ranges_start + ranges_len / sizeof(__be32); -+ -+ *addr_cells = of_n_addr_cells(node); -+ -+ prop = of_get_property(node, "#address-cells", NULL); -+ *c_addr_cells = be32_to_cpup(prop); -+ -+ prop = of_get_property(node, "#size-cells", NULL); -+ *c_size_cells = be32_to_cpup(prop); -+ -+ *cell_count = *addr_cells + *c_addr_cells + *c_size_cells; -+ tuple_len = (*cell_count) * sizeof(__be32); -+ -+ if (ranges_len % tuple_len) { -+ pr_warn("malformed ranges entry '%s'\n", node->name); -+ return -EINVAL; -+ } -+ return 0; -+} -+ -+static int __init mbus_dt_setup(struct mvebu_mbus_state *mbus, -+ struct device_node *np) -+{ -+ int addr_cells, c_addr_cells, c_size_cells; -+ int i, ret, cell_count; -+ const __be32 *r, *ranges_start, *ranges_end; -+ -+ ret = mbus_parse_ranges(np, &addr_cells, &c_addr_cells, -+ &c_size_cells, &cell_count, -+ &ranges_start, &ranges_end); -+ if (ret < 0) -+ return ret; -+ -+ for (i = 0, r = ranges_start; r < ranges_end; r += cell_count, i++) { -+ u32 windowid, base, size; -+ u8 target, attr; -+ -+ /* -+ * An entry with a non-zero custom field do not -+ * correspond to a static window, so skip it. -+ */ -+ windowid = of_read_number(r, 1); -+ if (CUSTOM(windowid)) -+ continue; -+ -+ target = TARGET(windowid); -+ attr = ATTR(windowid); -+ -+ base = of_read_number(r + c_addr_cells, addr_cells); -+ size = of_read_number(r + c_addr_cells + addr_cells, -+ c_size_cells); -+ ret = mbus_dt_setup_win(mbus, base, size, target, attr); -+ if (ret < 0) -+ return ret; -+ } -+ return 0; -+} -+ - int __init mvebu_mbus_dt_init(void) - { - struct resource mbuswins_res, sdramwins_res; -@@ -946,6 +1067,10 @@ int __init mvebu_mbus_dt_init(void) - resource_size(&mbuswins_res), - sdramwins_res.start, - resource_size(&sdramwins_res)); -- return ret; -+ if (ret) -+ return ret; -+ -+ /* Setup statically declared windows in the DT */ -+ return mbus_dt_setup(&mbus_state, np); - } - #endif diff --git a/target/linux/mvebu/patches-3.10/0046-bus-mvebu-mbus-Add-new-API-for-the-PCIe-memory-and-I.patch b/target/linux/mvebu/patches-3.10/0046-bus-mvebu-mbus-Add-new-API-for-the-PCIe-memory-and-I.patch deleted file mode 100644 index 973ffdef46..0000000000 --- a/target/linux/mvebu/patches-3.10/0046-bus-mvebu-mbus-Add-new-API-for-the-PCIe-memory-and-I.patch +++ /dev/null @@ -1,121 +0,0 @@ -From c9646c891dbd07061a9ff5e061f9f9e54c571349 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Tue, 9 Jul 2013 10:41:53 -0300 -Subject: [PATCH 046/203] bus: mvebu-mbus: Add new API for the PCIe memory and - IO aperture - -We add two optional properties to the MBus DT binding, to encode -the PCIe memory and IO aperture. This allows such information to -be retrieved by -for instance- the pci driver to allocate the -MBus decoding windows. - -Correspondingly, and in order to retrieve this information, -we add two new APIs. - -Signed-off-by: Ezequiel Garcia -Tested-by: Andrew Lunn -Tested-by: Sebastian Hesselbarth ---- - drivers/bus/mvebu-mbus.c | 49 ++++++++++++++++++++++++++++++++++++++++++++++++ - include/linux/mbus.h | 4 ++++ - 2 files changed, 53 insertions(+) - ---- a/drivers/bus/mvebu-mbus.c -+++ b/drivers/bus/mvebu-mbus.c -@@ -142,6 +142,8 @@ struct mvebu_mbus_state { - struct dentry *debugfs_root; - struct dentry *debugfs_sdram; - struct dentry *debugfs_devs; -+ struct resource pcie_mem_aperture; -+ struct resource pcie_io_aperture; - const struct mvebu_mbus_soc_data *soc; - int hw_io_coherency; - }; -@@ -821,6 +823,20 @@ int mvebu_mbus_del_window(phys_addr_t ba - return 0; - } - -+void mvebu_mbus_get_pcie_mem_aperture(struct resource *res) -+{ -+ if (!res) -+ return; -+ *res = mbus_state.pcie_mem_aperture; -+} -+ -+void mvebu_mbus_get_pcie_io_aperture(struct resource *res) -+{ -+ if (!res) -+ return; -+ *res = mbus_state.pcie_io_aperture; -+} -+ - static __init int mvebu_mbus_debugfs_init(void) - { - struct mvebu_mbus_state *s = &mbus_state; -@@ -1023,6 +1039,35 @@ static int __init mbus_dt_setup(struct m - return 0; - } - -+static void __init mvebu_mbus_get_pcie_resources(struct device_node *np, -+ struct resource *mem, -+ struct resource *io) -+{ -+ u32 reg[2]; -+ int ret; -+ -+ /* -+ * These are optional, so we clear them and they'll -+ * be zero if they are missing from the DT. -+ */ -+ memset(mem, 0, sizeof(struct resource)); -+ memset(io, 0, sizeof(struct resource)); -+ -+ ret = of_property_read_u32_array(np, "pcie-mem-aperture", reg, ARRAY_SIZE(reg)); -+ if (!ret) { -+ mem->start = reg[0]; -+ mem->end = mem->start + reg[1]; -+ mem->flags = IORESOURCE_MEM; -+ } -+ -+ ret = of_property_read_u32_array(np, "pcie-io-aperture", reg, ARRAY_SIZE(reg)); -+ if (!ret) { -+ io->start = reg[0]; -+ io->end = io->start + reg[1]; -+ io->flags = IORESOURCE_IO; -+ } -+} -+ - int __init mvebu_mbus_dt_init(void) - { - struct resource mbuswins_res, sdramwins_res; -@@ -1062,6 +1107,10 @@ int __init mvebu_mbus_dt_init(void) - return -EINVAL; - } - -+ /* Get optional pcie-{mem,io}-aperture properties */ -+ mvebu_mbus_get_pcie_resources(np, &mbus_state.pcie_mem_aperture, -+ &mbus_state.pcie_io_aperture); -+ - ret = mvebu_mbus_common_init(&mbus_state, - mbuswins_res.start, - resource_size(&mbuswins_res), ---- a/include/linux/mbus.h -+++ b/include/linux/mbus.h -@@ -11,6 +11,8 @@ - #ifndef __LINUX_MBUS_H - #define __LINUX_MBUS_H - -+struct resource; -+ - struct mbus_dram_target_info - { - /* -@@ -59,6 +61,8 @@ static inline const struct mbus_dram_tar - } - #endif - -+void mvebu_mbus_get_pcie_mem_aperture(struct resource *res); -+void mvebu_mbus_get_pcie_io_aperture(struct resource *res); - int mvebu_mbus_add_window_remap_flags(const char *devname, phys_addr_t base, - size_t size, phys_addr_t remap, - unsigned int flags); diff --git a/target/linux/mvebu/patches-3.10/0047-PCI-mvebu-Adapt-to-the-new-device-tree-layout.patch b/target/linux/mvebu/patches-3.10/0047-PCI-mvebu-Adapt-to-the-new-device-tree-layout.patch deleted file mode 100644 index 08de63d422..0000000000 --- a/target/linux/mvebu/patches-3.10/0047-PCI-mvebu-Adapt-to-the-new-device-tree-layout.patch +++ /dev/null @@ -1,184 +0,0 @@ -From 90b1f963b07d05e8243e5053a910e8a47222f7a1 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Fri, 5 Jul 2013 14:54:17 +0200 -Subject: [PATCH 047/203] PCI: mvebu: Adapt to the new device tree layout - -The new device tree layout encodes the window's target ID and attribute -in the PCIe controller node's ranges property. This allows to parse -such entries to obtain such information and use the recently introduced -MBus API to create the windows, instead of using the current name based -scheme. - -Acked-by: Bjorn Helgaas -Signed-off-by: Thomas Petazzoni -Tested-by: Andrew Lunn -Tested-by: Sebastian Hesselbarth ---- - drivers/pci/host/pci-mvebu.c | 113 ++++++++++++++++++++++++++++++++----------- - 1 file changed, 84 insertions(+), 29 deletions(-) - ---- a/drivers/pci/host/pci-mvebu.c -+++ b/drivers/pci/host/pci-mvebu.c -@@ -119,6 +119,10 @@ struct mvebu_pcie_port { - u32 port; - u32 lane; - int devfn; -+ unsigned int mem_target; -+ unsigned int mem_attr; -+ unsigned int io_target; -+ unsigned int io_attr; - struct clk *clk; - struct mvebu_sw_pci_bridge bridge; - struct device_node *dn; -@@ -303,10 +307,9 @@ static void mvebu_pcie_handle_iobase_cha - (port->bridge.iolimitupper << 16)) - - iobase); - -- mvebu_mbus_add_window_remap_flags(port->name, port->iowin_base, -- port->iowin_size, -- iobase, -- MVEBU_MBUS_PCI_IO); -+ mvebu_mbus_add_window_remap_by_id(port->io_target, port->io_attr, -+ port->iowin_base, port->iowin_size, -+ iobase); - - pci_ioremap_io(iobase, port->iowin_base); - } -@@ -338,10 +341,8 @@ static void mvebu_pcie_handle_membase_ch - (((port->bridge.memlimit & 0xFFF0) << 16) | 0xFFFFF) - - port->memwin_base; - -- mvebu_mbus_add_window_remap_flags(port->name, port->memwin_base, -- port->memwin_size, -- MVEBU_MBUS_NO_REMAP, -- MVEBU_MBUS_PCI_MEM); -+ mvebu_mbus_add_window_by_id(port->mem_target, port->mem_attr, -+ port->memwin_base, port->memwin_size); - } - - /* -@@ -730,12 +731,54 @@ mvebu_pcie_map_registers(struct platform - return devm_request_and_ioremap(&pdev->dev, ®s); - } - -+#define DT_FLAGS_TO_TYPE(flags) (((flags) >> 24) & 0x03) -+#define DT_TYPE_IO 0x1 -+#define DT_TYPE_MEM32 0x2 -+#define DT_CPUADDR_TO_TARGET(cpuaddr) (((cpuaddr) >> 56) & 0xFF) -+#define DT_CPUADDR_TO_ATTR(cpuaddr) (((cpuaddr) >> 48) & 0xFF) -+ -+static int mvebu_get_tgt_attr(struct device_node *np, int devfn, -+ unsigned long type, int *tgt, int *attr) -+{ -+ const int na = 3, ns = 2; -+ const __be32 *range; -+ int rlen, nranges, rangesz, pna, i; -+ -+ range = of_get_property(np, "ranges", &rlen); -+ if (!range) -+ return -EINVAL; -+ -+ pna = of_n_addr_cells(np); -+ rangesz = pna + na + ns; -+ nranges = rlen / sizeof(__be32) / rangesz; -+ -+ for (i = 0; i < nranges; i++) { -+ u32 flags = of_read_number(range, 1); -+ u32 slot = of_read_number(range, 2); -+ u64 cpuaddr = of_read_number(range + na, pna); -+ unsigned long rtype; -+ -+ if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_IO) -+ rtype = IORESOURCE_IO; -+ else if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_MEM32) -+ rtype = IORESOURCE_MEM; -+ -+ if (slot == PCI_SLOT(devfn) && type == rtype) { -+ *tgt = DT_CPUADDR_TO_TARGET(cpuaddr); -+ *attr = DT_CPUADDR_TO_ATTR(cpuaddr); -+ return 0; -+ } -+ -+ range += rangesz; -+ } -+ -+ return -ENOENT; -+} -+ - static int __init mvebu_pcie_probe(struct platform_device *pdev) - { - struct mvebu_pcie *pcie; - struct device_node *np = pdev->dev.of_node; -- struct of_pci_range range; -- struct of_pci_range_parser parser; - struct device_node *child; - int i, ret; - -@@ -746,29 +789,25 @@ static int __init mvebu_pcie_probe(struc - - pcie->pdev = pdev; - -- if (of_pci_range_parser_init(&parser, np)) -+ /* Get the PCIe memory and I/O aperture */ -+ mvebu_mbus_get_pcie_mem_aperture(&pcie->mem); -+ if (resource_size(&pcie->mem) == 0) { -+ dev_err(&pdev->dev, "invalid memory aperture size\n"); - return -EINVAL; -+ } - -- /* Get the I/O and memory ranges from DT */ -- for_each_of_pci_range(&parser, &range) { -- unsigned long restype = range.flags & IORESOURCE_TYPE_BITS; -- if (restype == IORESOURCE_IO) { -- of_pci_range_to_resource(&range, np, &pcie->io); -- of_pci_range_to_resource(&range, np, &pcie->realio); -- pcie->io.name = "I/O"; -- pcie->realio.start = max_t(resource_size_t, -- PCIBIOS_MIN_IO, -- range.pci_addr); -- pcie->realio.end = min_t(resource_size_t, -- IO_SPACE_LIMIT, -- range.pci_addr + range.size); -- } -- if (restype == IORESOURCE_MEM) { -- of_pci_range_to_resource(&range, np, &pcie->mem); -- pcie->mem.name = "MEM"; -- } -+ mvebu_mbus_get_pcie_io_aperture(&pcie->io); -+ if (resource_size(&pcie->io) == 0) { -+ dev_err(&pdev->dev, "invalid I/O aperture size\n"); -+ return -EINVAL; - } - -+ pcie->realio.flags = pcie->io.flags; -+ pcie->realio.start = PCIBIOS_MIN_IO; -+ pcie->realio.end = min_t(resource_size_t, -+ IO_SPACE_LIMIT, -+ resource_size(&pcie->io)); -+ - /* Get the bus range */ - ret = of_pci_parse_bus_range(np, &pcie->busn); - if (ret) { -@@ -816,6 +855,22 @@ static int __init mvebu_pcie_probe(struc - if (port->devfn < 0) - continue; - -+ ret = mvebu_get_tgt_attr(np, port->devfn, IORESOURCE_MEM, -+ &port->mem_target, &port->mem_attr); -+ if (ret < 0) { -+ dev_err(&pdev->dev, "PCIe%d.%d: cannot get tgt/attr for mem window\n", -+ port->port, port->lane); -+ continue; -+ } -+ -+ ret = mvebu_get_tgt_attr(np, port->devfn, IORESOURCE_IO, -+ &port->io_target, &port->io_attr); -+ if (ret < 0) { -+ dev_err(&pdev->dev, "PCIe%d.%d: cannot get tgt/attr for io window\n", -+ port->port, port->lane); -+ continue; -+ } -+ - port->base = mvebu_pcie_map_registers(pdev, child, port); - if (!port->base) { - dev_err(&pdev->dev, "PCIe%d.%d: cannot map registers\n", diff --git a/target/linux/mvebu/patches-3.10/0048-PCI-mvebu-Check-valid-base-address-before-port-setup.patch b/target/linux/mvebu/patches-3.10/0048-PCI-mvebu-Check-valid-base-address-before-port-setup.patch deleted file mode 100644 index c9022bbc77..0000000000 --- a/target/linux/mvebu/patches-3.10/0048-PCI-mvebu-Check-valid-base-address-before-port-setup.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 3dc077a80c71050e198e7884707ece042443fe3c Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Tue, 23 Jul 2013 07:36:00 -0300 -Subject: [PATCH 048/203] PCI: mvebu: Check valid base address before port - setup - -This driver does not fail to probe when it cannot obtain -a port base address. Therefore, add a check for NULL base address -before setting up the port, which prevents a kernel panic in such -cases. - -Signed-off-by: Ezequiel Garcia -Tested-by: Andrew Lunn -Tested-by: Sebastian Hesselbarth ---- - drivers/pci/host/pci-mvebu.c | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/drivers/pci/host/pci-mvebu.c -+++ b/drivers/pci/host/pci-mvebu.c -@@ -637,6 +637,8 @@ static int __init mvebu_pcie_setup(int n - - for (i = 0; i < pcie->nports; i++) { - struct mvebu_pcie_port *port = &pcie->ports[i]; -+ if (!port->base) -+ continue; - mvebu_pcie_setup_hw(port); - } - diff --git a/target/linux/mvebu/patches-3.10/0049-bus-mvebu-mbus-Remove-the-no-longer-used-name-based-.patch b/target/linux/mvebu/patches-3.10/0049-bus-mvebu-mbus-Remove-the-no-longer-used-name-based-.patch deleted file mode 100644 index ac97c113c4..0000000000 --- a/target/linux/mvebu/patches-3.10/0049-bus-mvebu-mbus-Remove-the-no-longer-used-name-based-.patch +++ /dev/null @@ -1,82 +0,0 @@ -From 1e94a8740cb1f9c328a3ae8ec4727d90bfb2d7f7 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Fri, 5 Jul 2013 14:54:23 +0200 -Subject: [PATCH 049/203] bus: mvebu-mbus: Remove the no longer used name-based - API - -Now that every user of the deprecated name-based API has been -converted to using the ID-based API, let's remove the former one. - -Signed-off-by: Thomas Petazzoni -Tested-by: Andrew Lunn -Tested-by: Sebastian Hesselbarth ---- - drivers/bus/mvebu-mbus.c | 38 -------------------------------------- - include/linux/mbus.h | 5 ----- - 2 files changed, 43 deletions(-) - ---- a/drivers/bus/mvebu-mbus.c -+++ b/drivers/bus/mvebu-mbus.c -@@ -766,44 +766,6 @@ int mvebu_mbus_add_window_remap_by_id(un - return mvebu_mbus_alloc_window(s, base, size, remap, target, attribute); - } - --int mvebu_mbus_add_window_remap_flags(const char *devname, phys_addr_t base, -- size_t size, phys_addr_t remap, -- unsigned int flags) --{ -- struct mvebu_mbus_state *s = &mbus_state; -- u8 target, attr; -- int i; -- -- if (!s->soc->map) -- return -ENODEV; -- -- for (i = 0; s->soc->map[i].name; i++) -- if (!strcmp(s->soc->map[i].name, devname)) -- break; -- -- if (!s->soc->map[i].name) { -- pr_err("unknown device '%s'\n", devname); -- return -ENODEV; -- } -- -- target = s->soc->map[i].target; -- attr = s->soc->map[i].attr; -- -- if (flags == MVEBU_MBUS_PCI_MEM) -- attr |= 0x8; -- else if (flags == MVEBU_MBUS_PCI_WA) -- attr |= 0x28; -- -- return mvebu_mbus_add_window_remap_by_id(target, attr, base, -- size, remap); --} -- --int mvebu_mbus_add_window(const char *devname, phys_addr_t base, size_t size) --{ -- return mvebu_mbus_add_window_remap_flags(devname, base, size, -- MVEBU_MBUS_NO_REMAP, 0); --} -- - int mvebu_mbus_add_window_by_id(unsigned int target, unsigned int attribute, - phys_addr_t base, size_t size) - { ---- a/include/linux/mbus.h -+++ b/include/linux/mbus.h -@@ -63,15 +63,10 @@ static inline const struct mbus_dram_tar - - void mvebu_mbus_get_pcie_mem_aperture(struct resource *res); - void mvebu_mbus_get_pcie_io_aperture(struct resource *res); --int mvebu_mbus_add_window_remap_flags(const char *devname, phys_addr_t base, -- size_t size, phys_addr_t remap, -- unsigned int flags); - int mvebu_mbus_add_window_remap_by_id(unsigned int target, - unsigned int attribute, - phys_addr_t base, size_t size, - phys_addr_t remap); --int mvebu_mbus_add_window(const char *devname, phys_addr_t base, -- size_t size); - int mvebu_mbus_add_window_by_id(unsigned int target, unsigned int attribute, - phys_addr_t base, size_t size); - int mvebu_mbus_del_window(phys_addr_t base, size_t size); diff --git a/target/linux/mvebu/patches-3.10/0050-bus-mvebu-mbus-Remove-name-target-attribute-mapping-.patch b/target/linux/mvebu/patches-3.10/0050-bus-mvebu-mbus-Remove-name-target-attribute-mapping-.patch deleted file mode 100644 index 0b6263309b..0000000000 --- a/target/linux/mvebu/patches-3.10/0050-bus-mvebu-mbus-Remove-name-target-attribute-mapping-.patch +++ /dev/null @@ -1,266 +0,0 @@ -From 08c3b38a75ca47b74c81d14e1715ab9dc7b0e5cb Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Fri, 5 Jul 2013 14:54:24 +0200 -Subject: [PATCH 050/203] bus: mvebu-mbus: Remove name -> target, attribute - mapping tables - -This tables were used together with the name-based MBus window -creation API. Since that's has been removed, we can also remove -the tables. - -Signed-off-by: Thomas Petazzoni -Tested-by: Andrew Lunn -Tested-by: Sebastian Hesselbarth ---- - drivers/bus/mvebu-mbus.c | 150 +++-------------------------------------------- - 1 file changed, 7 insertions(+), 143 deletions(-) - ---- a/drivers/bus/mvebu-mbus.c -+++ b/drivers/bus/mvebu-mbus.c -@@ -97,33 +97,6 @@ - - #define DOVE_DDR_BASE_CS_OFF(n) ((n) << 4) - --struct mvebu_mbus_mapping { -- const char *name; -- u8 target; -- u8 attr; -- u8 attrmask; --}; -- --/* -- * Masks used for the 'attrmask' field of mvebu_mbus_mapping. They -- * allow to get the real attribute value, discarding the special bits -- * used to select a PCI MEM region or a PCI WA region. This allows the -- * debugfs code to reverse-match the name of a device from its -- * target/attr values. -- * -- * For all devices except PCI, all bits of 'attr' must be -- * considered. For most SoCs, only bit 3 should be ignored (it allows -- * to select between PCI MEM and PCI I/O). On Orion5x however, there -- * is the special bit 5 to select a PCI WA region. -- */ --#define MAPDEF_NOMASK 0xff --#define MAPDEF_PCIMASK 0xf7 --#define MAPDEF_ORIONPCIMASK 0xd7 -- --/* Macro used to define one mvebu_mbus_mapping entry */ --#define MAPDEF(__n, __t, __a, __m) \ -- { .name = __n, .target = __t, .attr = __a, .attrmask = __m } -- - struct mvebu_mbus_state; - - struct mvebu_mbus_soc_data { -@@ -133,7 +106,6 @@ struct mvebu_mbus_soc_data { - void (*setup_cpu_target)(struct mvebu_mbus_state *s); - int (*show_cpu_target)(struct mvebu_mbus_state *s, - struct seq_file *seq, void *v); -- const struct mvebu_mbus_mapping *map; - }; - - struct mvebu_mbus_state { -@@ -430,8 +402,7 @@ static int mvebu_devs_debug_show(struct - u64 wbase, wremap; - u32 wsize; - u8 wtarget, wattr; -- int enabled, i; -- const char *name; -+ int enabled; - - mvebu_mbus_read_window(mbus, win, - &enabled, &wbase, &wsize, -@@ -442,18 +413,9 @@ static int mvebu_devs_debug_show(struct - continue; - } - -- -- for (i = 0; mbus->soc->map[i].name; i++) -- if (mbus->soc->map[i].target == wtarget && -- mbus->soc->map[i].attr == -- (wattr & mbus->soc->map[i].attrmask)) -- break; -- -- name = mbus->soc->map[i].name ?: "unknown"; -- -- seq_printf(seq, "[%02d] %016llx - %016llx : %s", -+ seq_printf(seq, "[%02d] %016llx - %016llx : %04x:%04x", - win, (unsigned long long)wbase, -- (unsigned long long)(wbase + wsize), name); -+ (unsigned long long)(wbase + wsize), wtarget, wattr); - - if (win < mbus->soc->num_remappable_wins) { - seq_printf(seq, " (remap %016llx)\n", -@@ -578,45 +540,12 @@ mvebu_mbus_dove_setup_cpu_target(struct - mvebu_mbus_dram_info.num_cs = cs; - } - --static const struct mvebu_mbus_mapping armada_370_map[] = { -- MAPDEF("bootrom", 1, 0xe0, MAPDEF_NOMASK), -- MAPDEF("devbus-boot", 1, 0x2f, MAPDEF_NOMASK), -- MAPDEF("devbus-cs0", 1, 0x3e, MAPDEF_NOMASK), -- MAPDEF("devbus-cs1", 1, 0x3d, MAPDEF_NOMASK), -- MAPDEF("devbus-cs2", 1, 0x3b, MAPDEF_NOMASK), -- MAPDEF("devbus-cs3", 1, 0x37, MAPDEF_NOMASK), -- MAPDEF("pcie0.0", 4, 0xe0, MAPDEF_PCIMASK), -- MAPDEF("pcie1.0", 8, 0xe0, MAPDEF_PCIMASK), -- {}, --}; -- - static const struct mvebu_mbus_soc_data armada_370_mbus_data = { - .num_wins = 20, - .num_remappable_wins = 8, - .win_cfg_offset = armada_370_xp_mbus_win_offset, - .setup_cpu_target = mvebu_mbus_default_setup_cpu_target, - .show_cpu_target = mvebu_sdram_debug_show_orion, -- .map = armada_370_map, --}; -- --static const struct mvebu_mbus_mapping armada_xp_map[] = { -- MAPDEF("bootrom", 1, 0x1d, MAPDEF_NOMASK), -- MAPDEF("devbus-boot", 1, 0x2f, MAPDEF_NOMASK), -- MAPDEF("devbus-cs0", 1, 0x3e, MAPDEF_NOMASK), -- MAPDEF("devbus-cs1", 1, 0x3d, MAPDEF_NOMASK), -- MAPDEF("devbus-cs2", 1, 0x3b, MAPDEF_NOMASK), -- MAPDEF("devbus-cs3", 1, 0x37, MAPDEF_NOMASK), -- MAPDEF("pcie0.0", 4, 0xe0, MAPDEF_PCIMASK), -- MAPDEF("pcie0.1", 4, 0xd0, MAPDEF_PCIMASK), -- MAPDEF("pcie0.2", 4, 0xb0, MAPDEF_PCIMASK), -- MAPDEF("pcie0.3", 4, 0x70, MAPDEF_PCIMASK), -- MAPDEF("pcie1.0", 8, 0xe0, MAPDEF_PCIMASK), -- MAPDEF("pcie1.1", 8, 0xd0, MAPDEF_PCIMASK), -- MAPDEF("pcie1.2", 8, 0xb0, MAPDEF_PCIMASK), -- MAPDEF("pcie1.3", 8, 0x70, MAPDEF_PCIMASK), -- MAPDEF("pcie2.0", 4, 0xf0, MAPDEF_PCIMASK), -- MAPDEF("pcie3.0", 8, 0xf0, MAPDEF_PCIMASK), -- {}, - }; - - static const struct mvebu_mbus_soc_data armada_xp_mbus_data = { -@@ -625,15 +554,6 @@ static const struct mvebu_mbus_soc_data - .win_cfg_offset = armada_370_xp_mbus_win_offset, - .setup_cpu_target = mvebu_mbus_default_setup_cpu_target, - .show_cpu_target = mvebu_sdram_debug_show_orion, -- .map = armada_xp_map, --}; -- --static const struct mvebu_mbus_mapping kirkwood_map[] = { -- MAPDEF("pcie0.0", 4, 0xe0, MAPDEF_PCIMASK), -- MAPDEF("pcie1.0", 4, 0xd0, MAPDEF_PCIMASK), -- MAPDEF("sram", 3, 0x01, MAPDEF_NOMASK), -- MAPDEF("nand", 1, 0x2f, MAPDEF_NOMASK), -- {}, - }; - - static const struct mvebu_mbus_soc_data kirkwood_mbus_data = { -@@ -642,16 +562,6 @@ static const struct mvebu_mbus_soc_data - .win_cfg_offset = orion_mbus_win_offset, - .setup_cpu_target = mvebu_mbus_default_setup_cpu_target, - .show_cpu_target = mvebu_sdram_debug_show_orion, -- .map = kirkwood_map, --}; -- --static const struct mvebu_mbus_mapping dove_map[] = { -- MAPDEF("pcie0.0", 0x4, 0xe0, MAPDEF_PCIMASK), -- MAPDEF("pcie1.0", 0x8, 0xe0, MAPDEF_PCIMASK), -- MAPDEF("cesa", 0x3, 0x01, MAPDEF_NOMASK), -- MAPDEF("bootrom", 0x1, 0xfd, MAPDEF_NOMASK), -- MAPDEF("scratchpad", 0xd, 0x0, MAPDEF_NOMASK), -- {}, - }; - - static const struct mvebu_mbus_soc_data dove_mbus_data = { -@@ -660,18 +570,6 @@ static const struct mvebu_mbus_soc_data - .win_cfg_offset = orion_mbus_win_offset, - .setup_cpu_target = mvebu_mbus_dove_setup_cpu_target, - .show_cpu_target = mvebu_sdram_debug_show_dove, -- .map = dove_map, --}; -- --static const struct mvebu_mbus_mapping orion5x_map[] = { -- MAPDEF("pcie0.0", 4, 0x51, MAPDEF_ORIONPCIMASK), -- MAPDEF("pci0.0", 3, 0x51, MAPDEF_ORIONPCIMASK), -- MAPDEF("devbus-boot", 1, 0x0f, MAPDEF_NOMASK), -- MAPDEF("devbus-cs0", 1, 0x1e, MAPDEF_NOMASK), -- MAPDEF("devbus-cs1", 1, 0x1d, MAPDEF_NOMASK), -- MAPDEF("devbus-cs2", 1, 0x1b, MAPDEF_NOMASK), -- MAPDEF("sram", 0, 0x00, MAPDEF_NOMASK), -- {}, - }; - - /* -@@ -684,7 +582,6 @@ static const struct mvebu_mbus_soc_data - .win_cfg_offset = orion_mbus_win_offset, - .setup_cpu_target = mvebu_mbus_default_setup_cpu_target, - .show_cpu_target = mvebu_sdram_debug_show_orion, -- .map = orion5x_map, - }; - - static const struct mvebu_mbus_soc_data orion5x_2win_mbus_data = { -@@ -693,21 +590,6 @@ static const struct mvebu_mbus_soc_data - .win_cfg_offset = orion_mbus_win_offset, - .setup_cpu_target = mvebu_mbus_default_setup_cpu_target, - .show_cpu_target = mvebu_sdram_debug_show_orion, -- .map = orion5x_map, --}; -- --static const struct mvebu_mbus_mapping mv78xx0_map[] = { -- MAPDEF("pcie0.0", 4, 0xe0, MAPDEF_PCIMASK), -- MAPDEF("pcie0.1", 4, 0xd0, MAPDEF_PCIMASK), -- MAPDEF("pcie0.2", 4, 0xb0, MAPDEF_PCIMASK), -- MAPDEF("pcie0.3", 4, 0x70, MAPDEF_PCIMASK), -- MAPDEF("pcie1.0", 8, 0xe0, MAPDEF_PCIMASK), -- MAPDEF("pcie1.1", 8, 0xd0, MAPDEF_PCIMASK), -- MAPDEF("pcie1.2", 8, 0xb0, MAPDEF_PCIMASK), -- MAPDEF("pcie1.3", 8, 0x70, MAPDEF_PCIMASK), -- MAPDEF("pcie2.0", 4, 0xf0, MAPDEF_PCIMASK), -- MAPDEF("pcie3.0", 8, 0xf0, MAPDEF_PCIMASK), -- {}, - }; - - static const struct mvebu_mbus_soc_data mv78xx0_mbus_data = { -@@ -716,7 +598,6 @@ static const struct mvebu_mbus_soc_data - .win_cfg_offset = mv78xx0_mbus_win_offset, - .setup_cpu_target = mvebu_mbus_default_setup_cpu_target, - .show_cpu_target = mvebu_sdram_debug_show_orion, -- .map = mv78xx0_map, - }; - - /* -@@ -895,33 +776,16 @@ static int __init mbus_dt_setup_win(stru - u32 base, u32 size, - u8 target, u8 attr) - { -- const struct mvebu_mbus_mapping *map = mbus->soc->map; -- const char *name; -- int i; -- -- /* Search for a suitable window in the existing mappings */ -- for (i = 0; map[i].name; i++) -- if (map[i].target == target && -- map[i].attr == (attr & map[i].attrmask)) -- break; -- -- name = map[i].name; -- if (!name) { -- pr_err("window 0x%x:0x%x is unknown, skipping\n", -- target, attr); -- return -EINVAL; -- } -- - if (!mvebu_mbus_window_conflicts(mbus, base, size, target, attr)) { -- pr_err("cannot add window '%s', conflicts with another window\n", -- name); -+ pr_err("cannot add window '%04x:%04x', conflicts with another window\n", -+ target, attr); - return -EBUSY; - } - - if (mvebu_mbus_alloc_window(mbus, base, size, MVEBU_MBUS_NO_REMAP, - target, attr)) { -- pr_err("cannot add window '%s', too many windows\n", -- name); -+ pr_err("cannot add window '%04x:%04x', too many windows\n", -+ target, attr); - return -ENOMEM; - } - return 0; diff --git a/target/linux/mvebu/patches-3.10/0051-bus-mvebu-mbus-Update-main-description.patch b/target/linux/mvebu/patches-3.10/0051-bus-mvebu-mbus-Update-main-description.patch deleted file mode 100644 index 8e10d90105..0000000000 --- a/target/linux/mvebu/patches-3.10/0051-bus-mvebu-mbus-Update-main-description.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 8f14bc2a883316dfd95383900c61d7d9183e8eaf Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Fri, 5 Jul 2013 14:54:25 +0200 -Subject: [PATCH 051/203] bus: mvebu-mbus: Update main description - -After replacing the MBus name-based by the new ID-based API -let's fix the general description of the driver at the beginning -of the file. - -Signed-off-by: Thomas Petazzoni -Tested-by: Andrew Lunn -Tested-by: Sebastian Hesselbarth ---- - drivers/bus/mvebu-mbus.c | 10 +++------- - 1 file changed, 3 insertions(+), 7 deletions(-) - ---- a/drivers/bus/mvebu-mbus.c -+++ b/drivers/bus/mvebu-mbus.c -@@ -35,13 +35,9 @@ - * - * - Provides an API for platform code or device drivers to - * dynamically add or remove address decoding windows for the CPU -> -- * device accesses. This API is mvebu_mbus_add_window(), -- * mvebu_mbus_add_window_remap_flags() and -- * mvebu_mbus_del_window(). Since the (target, attribute) values -- * differ from one SoC family to another, the API uses a 'const char -- * *' string to identify devices, and this driver is responsible for -- * knowing the mapping between the name of a device and its -- * corresponding (target, attribute) in the current SoC family. -+ * device accesses. This API is mvebu_mbus_add_window_by_id(), -+ * mvebu_mbus_add_window_remap_by_id() and -+ * mvebu_mbus_del_window(). - * - * - Provides a debugfs interface in /sys/kernel/debug/mvebu-mbus/ to - * see the list of CPU -> SDRAM windows and their configuration diff --git a/target/linux/mvebu/patches-3.10/0052-bus-mvebu-mbus-Factorize-Armada-370-XP-data-structur.patch b/target/linux/mvebu/patches-3.10/0052-bus-mvebu-mbus-Factorize-Armada-370-XP-data-structur.patch deleted file mode 100644 index 382aa438b5..0000000000 --- a/target/linux/mvebu/patches-3.10/0052-bus-mvebu-mbus-Factorize-Armada-370-XP-data-structur.patch +++ /dev/null @@ -1,48 +0,0 @@ -From 2c8f0b1810ff9cd45ed2055441b4c43afcfb7d2a Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Fri, 5 Jul 2013 14:54:26 +0200 -Subject: [PATCH 052/203] bus: mvebu-mbus: Factorize Armada 370/XP data - structures - -These structures were only different in the mapping tables. -Now that those tables have been removed, it doesn't make any sense -to keep different structures. - -Signed-off-by: Thomas Petazzoni -Tested-by: Andrew Lunn -Tested-by: Sebastian Hesselbarth ---- - drivers/bus/mvebu-mbus.c | 14 +++----------- - 1 file changed, 3 insertions(+), 11 deletions(-) - ---- a/drivers/bus/mvebu-mbus.c -+++ b/drivers/bus/mvebu-mbus.c -@@ -536,15 +536,7 @@ mvebu_mbus_dove_setup_cpu_target(struct - mvebu_mbus_dram_info.num_cs = cs; - } - --static const struct mvebu_mbus_soc_data armada_370_mbus_data = { -- .num_wins = 20, -- .num_remappable_wins = 8, -- .win_cfg_offset = armada_370_xp_mbus_win_offset, -- .setup_cpu_target = mvebu_mbus_default_setup_cpu_target, -- .show_cpu_target = mvebu_sdram_debug_show_orion, --}; -- --static const struct mvebu_mbus_soc_data armada_xp_mbus_data = { -+static const struct mvebu_mbus_soc_data armada_370_xp_mbus_data = { - .num_wins = 20, - .num_remappable_wins = 8, - .win_cfg_offset = armada_370_xp_mbus_win_offset, -@@ -604,9 +596,9 @@ static const struct mvebu_mbus_soc_data - */ - static const struct of_device_id of_mvebu_mbus_ids[] = { - { .compatible = "marvell,armada370-mbus", -- .data = &armada_370_mbus_data, }, -+ .data = &armada_370_xp_mbus_data, }, - { .compatible = "marvell,armadaxp-mbus", -- .data = &armada_xp_mbus_data, }, -+ .data = &armada_370_xp_mbus_data, }, - { .compatible = "marvell,kirkwood-mbus", - .data = &kirkwood_mbus_data, }, - { .compatible = "marvell,dove-mbus", diff --git a/target/linux/mvebu/patches-3.10/0053-ARM-mvebu-Remove-the-harcoded-BootROM-window-allocat.patch b/target/linux/mvebu/patches-3.10/0053-ARM-mvebu-Remove-the-harcoded-BootROM-window-allocat.patch deleted file mode 100644 index 393bfc32c6..0000000000 --- a/target/linux/mvebu/patches-3.10/0053-ARM-mvebu-Remove-the-harcoded-BootROM-window-allocat.patch +++ /dev/null @@ -1,67 +0,0 @@ -From 23a9b291a7b9ba28b31da56e6ced7a8168baa3de Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Tue, 21 May 2013 11:01:33 -0300 -Subject: [PATCH 053/203] ARM: mvebu: Remove the harcoded BootROM window - allocation - -The address decoding window to access the BootROM should not be -allocated programatically, but instead declared in the device tree. - -Signed-off-by: Ezequiel Garcia -Tested-by: Andrew Lunn -Tested-by: Sebastian Hesselbarth ---- - arch/arm/mach-mvebu/platsmp.c | 25 ++++++++++++++++++++++++- - 1 file changed, 24 insertions(+), 1 deletion(-) - ---- a/arch/arm/mach-mvebu/platsmp.c -+++ b/arch/arm/mach-mvebu/platsmp.c -@@ -21,6 +21,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -29,6 +30,9 @@ - #include "pmsu.h" - #include "coherency.h" - -+#define AXP_BOOTROM_BASE 0xfff00000 -+#define AXP_BOOTROM_SIZE 0x100000 -+ - void __init set_secondary_cpus_clock(void) - { - int thiscpu; -@@ -115,10 +119,29 @@ static void __init armada_xp_smp_init_cp - - void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus) - { -+ struct device_node *node; -+ struct resource res; -+ int err; -+ - set_secondary_cpus_clock(); - flush_cache_all(); - set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0); -- mvebu_mbus_add_window("bootrom", 0xfff00000, SZ_1M); -+ -+ /* -+ * In order to boot the secondary CPUs we need to ensure -+ * the bootROM is mapped at the correct address. -+ */ -+ node = of_find_compatible_node(NULL, NULL, "marvell,bootrom"); -+ if (!node) -+ panic("Cannot find 'marvell,bootrom' compatible node"); -+ -+ err = of_address_to_resource(node, 0, &res); -+ if (err < 0) -+ panic("Cannot get 'bootrom' node address"); -+ -+ if (res.start != AXP_BOOTROM_BASE || -+ resource_size(&res) != AXP_BOOTROM_SIZE) -+ panic("The address for the BootROM is incorrect"); - } - - struct smp_operations armada_xp_smp_ops __initdata = { diff --git a/target/linux/mvebu/patches-3.10/0054-ARM-mvebu-Initialize-MBus-using-the-DT-binding.patch b/target/linux/mvebu/patches-3.10/0054-ARM-mvebu-Initialize-MBus-using-the-DT-binding.patch deleted file mode 100644 index 586ec319f2..0000000000 --- a/target/linux/mvebu/patches-3.10/0054-ARM-mvebu-Initialize-MBus-using-the-DT-binding.patch +++ /dev/null @@ -1,67 +0,0 @@ -From 08fe0e166c06fd86d6c8eed145d6508c3e5efaac Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Tue, 21 May 2013 11:12:00 -0300 -Subject: [PATCH 054/203] ARM: mvebu: Initialize MBus using the DT binding - -Now that the mbus device tree binding has been introduced, we can -switch over to it. - -Also, and since the initialization of the mbus driver is quite -fundamental for the system to work properly, this patch adds a BUG() -in case mbus fails to initialize. - -Signed-off-by: Ezequiel Garcia -Tested-by: Andrew Lunn -Tested-by: Sebastian Hesselbarth ---- - arch/arm/mach-mvebu/armada-370-xp.c | 34 +--------------------------------- - 1 file changed, 1 insertion(+), 33 deletions(-) - ---- a/arch/arm/mach-mvebu/armada-370-xp.c -+++ b/arch/arm/mach-mvebu/armada-370-xp.c -@@ -35,44 +35,12 @@ static void __init armada_370_xp_map_io( - debug_ll_io_init(); - } - --/* -- * This initialization will be replaced by a DT-based -- * initialization once the mvebu-mbus driver gains DT support. -- */ -- --#define ARMADA_370_XP_MBUS_WINS_OFFS 0x20000 --#define ARMADA_370_XP_MBUS_WINS_SIZE 0x100 --#define ARMADA_370_XP_SDRAM_WINS_OFFS 0x20180 --#define ARMADA_370_XP_SDRAM_WINS_SIZE 0x20 -- --static void __init armada_370_xp_mbus_init(void) --{ -- char *mbus_soc_name; -- struct device_node *dn; -- const __be32 mbus_wins_offs = cpu_to_be32(ARMADA_370_XP_MBUS_WINS_OFFS); -- const __be32 sdram_wins_offs = cpu_to_be32(ARMADA_370_XP_SDRAM_WINS_OFFS); -- -- if (of_machine_is_compatible("marvell,armada370")) -- mbus_soc_name = "marvell,armada370-mbus"; -- else -- mbus_soc_name = "marvell,armadaxp-mbus"; -- -- dn = of_find_node_by_name(NULL, "internal-regs"); -- BUG_ON(!dn); -- -- mvebu_mbus_init(mbus_soc_name, -- of_translate_address(dn, &mbus_wins_offs), -- ARMADA_370_XP_MBUS_WINS_SIZE, -- of_translate_address(dn, &sdram_wins_offs), -- ARMADA_370_XP_SDRAM_WINS_SIZE); --} -- - static void __init armada_370_xp_timer_and_clk_init(void) - { - mvebu_clocks_init(); - armada_370_xp_timer_init(); - coherency_init(); -- armada_370_xp_mbus_init(); -+ BUG_ON(mvebu_mbus_dt_init()); - #ifdef CONFIG_CACHE_L2X0 - l2x0_of_init(0, ~0UL); - #endif diff --git a/target/linux/mvebu/patches-3.10/0055-ARM-mvebu-Use-the-preprocessor-on-Armada-370-XP-devi.patch b/target/linux/mvebu/patches-3.10/0055-ARM-mvebu-Use-the-preprocessor-on-Armada-370-XP-devi.patch deleted file mode 100644 index 7c132a2689..0000000000 --- a/target/linux/mvebu/patches-3.10/0055-ARM-mvebu-Use-the-preprocessor-on-Armada-370-XP-devi.patch +++ /dev/null @@ -1,132 +0,0 @@ -From 09aa74a11d05763043b1925628f65a5ac0d42237 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Wed, 12 Jun 2013 15:42:00 -0300 -Subject: [PATCH 055/203] ARM: mvebu: Use the preprocessor on Armada 370/XP - device tree files - -Signed-off-by: Ezequiel Garcia -Tested-by: Andrew Lunn -Tested-by: Sebastian Hesselbarth ---- - arch/arm/boot/dts/armada-370-db.dts | 2 +- - arch/arm/boot/dts/armada-370-mirabox.dts | 2 +- - arch/arm/boot/dts/armada-370-rd.dts | 2 +- - arch/arm/boot/dts/armada-370.dtsi | 2 +- - arch/arm/boot/dts/armada-xp-db.dts | 2 +- - arch/arm/boot/dts/armada-xp-gp.dts | 2 +- - arch/arm/boot/dts/armada-xp-mv78260.dtsi | 2 +- - arch/arm/boot/dts/armada-xp-mv78460.dtsi | 2 +- - arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 2 +- - arch/arm/boot/dts/armada-xp.dtsi | 2 +- - 10 files changed, 10 insertions(+), 10 deletions(-) - ---- a/arch/arm/boot/dts/armada-370-db.dts -+++ b/arch/arm/boot/dts/armada-370-db.dts -@@ -14,7 +14,7 @@ - */ - - /dts-v1/; --/include/ "armada-370.dtsi" -+#include "armada-370.dtsi" - - / { - model = "Marvell Armada 370 Evaluation Board"; ---- a/arch/arm/boot/dts/armada-370-mirabox.dts -+++ b/arch/arm/boot/dts/armada-370-mirabox.dts -@@ -9,7 +9,7 @@ - */ - - /dts-v1/; --/include/ "armada-370.dtsi" -+#include "armada-370.dtsi" - - / { - model = "Globalscale Mirabox"; ---- a/arch/arm/boot/dts/armada-370-rd.dts -+++ b/arch/arm/boot/dts/armada-370-rd.dts -@@ -12,7 +12,7 @@ - */ - - /dts-v1/; --/include/ "armada-370.dtsi" -+#include "armada-370.dtsi" - - / { - model = "Marvell Armada 370 Reference Design"; ---- a/arch/arm/boot/dts/armada-370.dtsi -+++ b/arch/arm/boot/dts/armada-370.dtsi -@@ -15,7 +15,7 @@ - * common to all Armada SoCs. - */ - --/include/ "armada-370-xp.dtsi" -+#include "armada-370-xp.dtsi" - /include/ "skeleton.dtsi" - - / { ---- a/arch/arm/boot/dts/armada-xp-db.dts -+++ b/arch/arm/boot/dts/armada-xp-db.dts -@@ -14,7 +14,7 @@ - */ - - /dts-v1/; --/include/ "armada-xp-mv78460.dtsi" -+#include "armada-xp-mv78460.dtsi" - - / { - model = "Marvell Armada XP Evaluation Board"; ---- a/arch/arm/boot/dts/armada-xp-gp.dts -+++ b/arch/arm/boot/dts/armada-xp-gp.dts -@@ -14,7 +14,7 @@ - */ - - /dts-v1/; --/include/ "armada-xp-mv78460.dtsi" -+#include "armada-xp-mv78460.dtsi" - - / { - model = "Marvell Armada XP Development Board DB-MV784MP-GP"; ---- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi -+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi -@@ -13,7 +13,7 @@ - * common to all Armada XP SoCs. - */ - --/include/ "armada-xp.dtsi" -+#include "armada-xp.dtsi" - - / { - model = "Marvell Armada XP MV78260 SoC"; ---- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi -+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi -@@ -13,7 +13,7 @@ - * common to all Armada XP SoCs. - */ - --/include/ "armada-xp.dtsi" -+#include "armada-xp.dtsi" - - / { - model = "Marvell Armada XP MV78460 SoC"; ---- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts -+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts -@@ -11,7 +11,7 @@ - */ - - /dts-v1/; --/include/ "armada-xp-mv78260.dtsi" -+#include "armada-xp-mv78260.dtsi" - - / { - model = "PlatHome OpenBlocks AX3-4 board"; ---- a/arch/arm/boot/dts/armada-xp.dtsi -+++ b/arch/arm/boot/dts/armada-xp.dtsi -@@ -16,7 +16,7 @@ - * common to all Armada SoCs. - */ - --/include/ "armada-370-xp.dtsi" -+#include "armada-370-xp.dtsi" - - / { - model = "Marvell Armada XP family SoC"; diff --git a/target/linux/mvebu/patches-3.10/0056-ARM-mvebu-Add-MBus-to-Armada-370-XP-device-tree.patch b/target/linux/mvebu/patches-3.10/0056-ARM-mvebu-Add-MBus-to-Armada-370-XP-device-tree.patch deleted file mode 100644 index ef7b59d9f4..0000000000 --- a/target/linux/mvebu/patches-3.10/0056-ARM-mvebu-Add-MBus-to-Armada-370-XP-device-tree.patch +++ /dev/null @@ -1,167 +0,0 @@ -From 8298866bfa7fe9c1e33055322c415f612c16a477 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Tue, 28 May 2013 08:56:04 -0300 -Subject: [PATCH 056/203] ARM: mvebu: Add MBus to Armada 370/XP device tree - -The Armada 370/XP SoC family has a completely configurable address -space handled by the MBus controller. - -This patch introduces the device tree layout of MBus, making the -'soc' node as mbus-compatible. -Since every peripheral/controller is a child of this 'soc' node, -this makes all of them sit behind the mbus, thus describing the -hardware accurately. - -A translation entry has been added for the internal-regs mapping. -This can't be done in the common armada-370-xp.dtsi because A370 -and AXP have different addressing width. - -Signed-off-by: Ezequiel Garcia -Tested-by: Andrew Lunn -Tested-by: Sebastian Hesselbarth ---- - arch/arm/boot/dts/armada-370-db.dts | 2 ++ - arch/arm/boot/dts/armada-370-mirabox.dts | 2 ++ - arch/arm/boot/dts/armada-370-rd.dts | 2 ++ - arch/arm/boot/dts/armada-370-xp.dtsi | 15 ++++++++++----- - arch/arm/boot/dts/armada-370.dtsi | 4 ++-- - arch/arm/boot/dts/armada-xp-db.dts | 4 +--- - arch/arm/boot/dts/armada-xp-gp.dts | 4 +--- - arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 4 +--- - arch/arm/boot/dts/armada-xp.dtsi | 2 ++ - 9 files changed, 23 insertions(+), 16 deletions(-) - ---- a/arch/arm/boot/dts/armada-370-db.dts -+++ b/arch/arm/boot/dts/armada-370-db.dts -@@ -30,6 +30,8 @@ - }; - - soc { -+ ranges = ; -+ - internal-regs { - serial@12000 { - clock-frequency = <200000000>; ---- a/arch/arm/boot/dts/armada-370-mirabox.dts -+++ b/arch/arm/boot/dts/armada-370-mirabox.dts -@@ -25,6 +25,8 @@ - }; - - soc { -+ ranges = ; -+ - internal-regs { - serial@12000 { - clock-frequency = <200000000>; ---- a/arch/arm/boot/dts/armada-370-rd.dts -+++ b/arch/arm/boot/dts/armada-370-rd.dts -@@ -28,6 +28,8 @@ - }; - - soc { -+ ranges = ; -+ - internal-regs { - serial@12000 { - clock-frequency = <200000000>; ---- a/arch/arm/boot/dts/armada-370-xp.dtsi -+++ b/arch/arm/boot/dts/armada-370-xp.dtsi -@@ -18,6 +18,8 @@ - - /include/ "skeleton64.dtsi" - -+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) -+ - / { - model = "Marvell Armada 370 and XP SoC"; - compatible = "marvell,armada-370-xp"; -@@ -29,18 +31,21 @@ - }; - - soc { -- #address-cells = <1>; -+ #address-cells = <2>; - #size-cells = <1>; -- compatible = "simple-bus"; -+ controller = <&mbusc>; - interrupt-parent = <&mpic>; -- ranges = <0 0 0xd0000000 0x0100000 /* internal registers */ -- 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */>; - - internal-regs { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; -- ranges; -+ ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; -+ -+ mbusc: mbus-controller@20000 { -+ compatible = "marvell,mbus-controller"; -+ reg = <0x20000 0x100>, <0x20180 0x20>; -+ }; - - mpic: interrupt-controller@20000 { - compatible = "marvell,mpic"; ---- a/arch/arm/boot/dts/armada-370.dtsi -+++ b/arch/arm/boot/dts/armada-370.dtsi -@@ -29,8 +29,8 @@ - }; - - soc { -- ranges = <0 0xd0000000 0x0100000 /* internal registers */ -- 0xe0000000 0xe0000000 0x8100000 /* PCIe */>; -+ compatible = "marvell,armada370-mbus", "simple-bus"; -+ - internal-regs { - system-controller@18200 { - compatible = "marvell,armada-370-xp-system-controller"; ---- a/arch/arm/boot/dts/armada-xp-db.dts -+++ b/arch/arm/boot/dts/armada-xp-db.dts -@@ -30,9 +30,7 @@ - }; - - soc { -- ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */ -- 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */ -- 0xf0000000 0 0xf0000000 0x1000000>; /* Device Bus, NOR 16MiB */ -+ ranges = ; - - internal-regs { - serial@12000 { ---- a/arch/arm/boot/dts/armada-xp-gp.dts -+++ b/arch/arm/boot/dts/armada-xp-gp.dts -@@ -39,9 +39,7 @@ - }; - - soc { -- ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */ -- 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */ -- 0xf0000000 0 0xf0000000 0x1000000 /* Device Bus, NOR 16MiB */>; -+ ranges = ; - - internal-regs { - serial@12000 { ---- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts -+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts -@@ -27,9 +27,7 @@ - }; - - soc { -- ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */ -- 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */ -- 0xf0000000 0 0xf0000000 0x8000000 /* Device Bus, NOR 128MiB */>; -+ ranges = ; - - internal-regs { - serial@12000 { ---- a/arch/arm/boot/dts/armada-xp.dtsi -+++ b/arch/arm/boot/dts/armada-xp.dtsi -@@ -23,6 +23,8 @@ - compatible = "marvell,armadaxp", "marvell,armada-370-xp"; - - soc { -+ compatible = "marvell,armadaxp-mbus", "simple-bus"; -+ - internal-regs { - L2: l2-cache { - compatible = "marvell,aurora-system-cache"; diff --git a/target/linux/mvebu/patches-3.10/0057-ARM-mvebu-Add-BootROM-to-Armada-370-XP-device-tree.patch b/target/linux/mvebu/patches-3.10/0057-ARM-mvebu-Add-BootROM-to-Armada-370-XP-device-tree.patch deleted file mode 100644 index c1509663b3..0000000000 --- a/target/linux/mvebu/patches-3.10/0057-ARM-mvebu-Add-BootROM-to-Armada-370-XP-device-tree.patch +++ /dev/null @@ -1,123 +0,0 @@ -From 1028055490cf9d6e146f57d920e8cfff4eda37e2 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Fri, 14 Jun 2013 10:34:45 -0300 -Subject: [PATCH 057/203] ARM: mvebu: Add BootROM to Armada 370/XP device tree - -In order to access the SoC BootROM, we need to declare a mapping -(through a ranges property). The mbus driver will use this property -to allocate a suitable address decoding window. - -Signed-off-by: Ezequiel Garcia -Tested-by: Andrew Lunn -Tested-by: Sebastian Hesselbarth ---- - arch/arm/boot/dts/armada-370-db.dts | 3 ++- - arch/arm/boot/dts/armada-370-mirabox.dts | 3 ++- - arch/arm/boot/dts/armada-370-rd.dts | 3 ++- - arch/arm/boot/dts/armada-370.dtsi | 5 +++++ - arch/arm/boot/dts/armada-xp-db.dts | 3 ++- - arch/arm/boot/dts/armada-xp-gp.dts | 3 ++- - arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 3 ++- - arch/arm/boot/dts/armada-xp.dtsi | 5 +++++ - 8 files changed, 22 insertions(+), 6 deletions(-) - ---- a/arch/arm/boot/dts/armada-370-db.dts -+++ b/arch/arm/boot/dts/armada-370-db.dts -@@ -30,7 +30,8 @@ - }; - - soc { -- ranges = ; -+ ranges = ; - - internal-regs { - serial@12000 { ---- a/arch/arm/boot/dts/armada-370-mirabox.dts -+++ b/arch/arm/boot/dts/armada-370-mirabox.dts -@@ -25,7 +25,8 @@ - }; - - soc { -- ranges = ; -+ ranges = ; - - internal-regs { - serial@12000 { ---- a/arch/arm/boot/dts/armada-370-rd.dts -+++ b/arch/arm/boot/dts/armada-370-rd.dts -@@ -28,7 +28,8 @@ - }; - - soc { -- ranges = ; -+ ranges = ; - - internal-regs { - serial@12000 { ---- a/arch/arm/boot/dts/armada-370.dtsi -+++ b/arch/arm/boot/dts/armada-370.dtsi -@@ -31,6 +31,11 @@ - soc { - compatible = "marvell,armada370-mbus", "simple-bus"; - -+ bootrom { -+ compatible = "marvell,bootrom"; -+ reg = ; -+ }; -+ - internal-regs { - system-controller@18200 { - compatible = "marvell,armada-370-xp-system-controller"; ---- a/arch/arm/boot/dts/armada-xp-db.dts -+++ b/arch/arm/boot/dts/armada-xp-db.dts -@@ -30,7 +30,8 @@ - }; - - soc { -- ranges = ; -+ ranges = ; - - internal-regs { - serial@12000 { ---- a/arch/arm/boot/dts/armada-xp-gp.dts -+++ b/arch/arm/boot/dts/armada-xp-gp.dts -@@ -39,7 +39,8 @@ - }; - - soc { -- ranges = ; -+ ranges = ; - - internal-regs { - serial@12000 { ---- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts -+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts -@@ -27,7 +27,8 @@ - }; - - soc { -- ranges = ; -+ ranges = ; - - internal-regs { - serial@12000 { ---- a/arch/arm/boot/dts/armada-xp.dtsi -+++ b/arch/arm/boot/dts/armada-xp.dtsi -@@ -25,6 +25,11 @@ - soc { - compatible = "marvell,armadaxp-mbus", "simple-bus"; - -+ bootrom { -+ compatible = "marvell,bootrom"; -+ reg = ; -+ }; -+ - internal-regs { - L2: l2-cache { - compatible = "marvell,aurora-system-cache"; diff --git a/target/linux/mvebu/patches-3.10/0058-ARM-mvebu-Relocate-Armada-370-XP-DeviceBus-device-tr.patch b/target/linux/mvebu/patches-3.10/0058-ARM-mvebu-Relocate-Armada-370-XP-DeviceBus-device-tr.patch deleted file mode 100644 index 4d7bb5fb56..0000000000 --- a/target/linux/mvebu/patches-3.10/0058-ARM-mvebu-Relocate-Armada-370-XP-DeviceBus-device-tr.patch +++ /dev/null @@ -1,357 +0,0 @@ -From bcb0e54d62804f1f986ad478a11235dadb1b61bb Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Fri, 14 Jun 2013 10:44:57 -0300 -Subject: [PATCH 058/203] ARM: mvebu: Relocate Armada 370/XP DeviceBus device - tree nodes - -Now that mbus has been added to the device tree, it's possible to -move the DeviceBus out of internal registers, placing it directly -below the mbus. This is a more accurate representation of the hardware. - -Signed-off-by: Ezequiel Garcia -Tested-by: Andrew Lunn -Tested-by: Sebastian Hesselbarth ---- - arch/arm/boot/dts/armada-370-xp.dtsi | 94 +++++++++++++----------- - arch/arm/boot/dts/armada-xp-db.dts | 59 +++++++-------- - arch/arm/boot/dts/armada-xp-gp.dts | 60 +++++++-------- - arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 60 +++++++-------- - 4 files changed, 140 insertions(+), 133 deletions(-) - ---- a/arch/arm/boot/dts/armada-370-xp.dtsi -+++ b/arch/arm/boot/dts/armada-370-xp.dtsi -@@ -36,6 +36,56 @@ - controller = <&mbusc>; - interrupt-parent = <&mpic>; - -+ devbus-bootcs { -+ compatible = "marvell,mvebu-devbus"; -+ reg = ; -+ ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ clocks = <&coreclk 0>; -+ status = "disabled"; -+ }; -+ -+ devbus-cs0 { -+ compatible = "marvell,mvebu-devbus"; -+ reg = ; -+ ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ clocks = <&coreclk 0>; -+ status = "disabled"; -+ }; -+ -+ devbus-cs1 { -+ compatible = "marvell,mvebu-devbus"; -+ reg = ; -+ ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ clocks = <&coreclk 0>; -+ status = "disabled"; -+ }; -+ -+ devbus-cs2 { -+ compatible = "marvell,mvebu-devbus"; -+ reg = ; -+ ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ clocks = <&coreclk 0>; -+ status = "disabled"; -+ }; -+ -+ devbus-cs3 { -+ compatible = "marvell,mvebu-devbus"; -+ reg = ; -+ ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ clocks = <&coreclk 0>; -+ status = "disabled"; -+ }; -+ - internal-regs { - compatible = "simple-bus"; - #address-cells = <1>; -@@ -191,50 +241,6 @@ - status = "disabled"; - }; - -- devbus-bootcs@10400 { -- compatible = "marvell,mvebu-devbus"; -- reg = <0x10400 0x8>; -- #address-cells = <1>; -- #size-cells = <1>; -- clocks = <&coreclk 0>; -- status = "disabled"; -- }; -- -- devbus-cs0@10408 { -- compatible = "marvell,mvebu-devbus"; -- reg = <0x10408 0x8>; -- #address-cells = <1>; -- #size-cells = <1>; -- clocks = <&coreclk 0>; -- status = "disabled"; -- }; -- -- devbus-cs1@10410 { -- compatible = "marvell,mvebu-devbus"; -- reg = <0x10410 0x8>; -- #address-cells = <1>; -- #size-cells = <1>; -- clocks = <&coreclk 0>; -- status = "disabled"; -- }; -- -- devbus-cs2@10418 { -- compatible = "marvell,mvebu-devbus"; -- reg = <0x10418 0x8>; -- #address-cells = <1>; -- #size-cells = <1>; -- clocks = <&coreclk 0>; -- status = "disabled"; -- }; -- -- devbus-cs3@10420 { -- compatible = "marvell,mvebu-devbus"; -- reg = <0x10420 0x8>; -- #address-cells = <1>; -- #size-cells = <1>; -- clocks = <&coreclk 0>; -- status = "disabled"; -- }; - }; - }; - }; ---- a/arch/arm/boot/dts/armada-xp-db.dts -+++ b/arch/arm/boot/dts/armada-xp-db.dts -@@ -31,7 +31,36 @@ - - soc { - ranges = ; -+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 -+ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>; -+ -+ devbus-bootcs { -+ status = "okay"; -+ -+ /* Device Bus parameters are required */ -+ -+ /* Read parameters */ -+ devbus,bus-width = <8>; -+ devbus,turn-off-ps = <60000>; -+ devbus,badr-skew-ps = <0>; -+ devbus,acc-first-ps = <124000>; -+ devbus,acc-next-ps = <248000>; -+ devbus,rd-setup-ps = <0>; -+ devbus,rd-hold-ps = <0>; -+ -+ /* Write parameters */ -+ devbus,sync-enable = <0>; -+ devbus,wr-high-ps = <60000>; -+ devbus,wr-low-ps = <60000>; -+ devbus,ale-wr-ps = <60000>; -+ -+ /* NOR 16 MiB */ -+ nor@0 { -+ compatible = "cfi-flash"; -+ reg = <0 0x1000000>; -+ bank-width = <2>; -+ }; -+ }; - - internal-regs { - serial@12000 { -@@ -160,34 +189,6 @@ - }; - }; - -- devbus-bootcs@10400 { -- status = "okay"; -- ranges = <0 0xf0000000 0x1000000>; -- -- /* Device Bus parameters are required */ -- -- /* Read parameters */ -- devbus,bus-width = <8>; -- devbus,turn-off-ps = <60000>; -- devbus,badr-skew-ps = <0>; -- devbus,acc-first-ps = <124000>; -- devbus,acc-next-ps = <248000>; -- devbus,rd-setup-ps = <0>; -- devbus,rd-hold-ps = <0>; -- -- /* Write parameters */ -- devbus,sync-enable = <0>; -- devbus,wr-high-ps = <60000>; -- devbus,wr-low-ps = <60000>; -- devbus,ale-wr-ps = <60000>; -- -- /* NOR 16 MiB */ -- nor@0 { -- compatible = "cfi-flash"; -- reg = <0 0x1000000>; -- bank-width = <2>; -- }; -- }; - }; - }; - }; ---- a/arch/arm/boot/dts/armada-xp-gp.dts -+++ b/arch/arm/boot/dts/armada-xp-gp.dts -@@ -40,7 +40,36 @@ - - soc { - ranges = ; -+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 -+ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>; -+ -+ devbus-bootcs { -+ status = "okay"; -+ -+ /* Device Bus parameters are required */ -+ -+ /* Read parameters */ -+ devbus,bus-width = <8>; -+ devbus,turn-off-ps = <60000>; -+ devbus,badr-skew-ps = <0>; -+ devbus,acc-first-ps = <124000>; -+ devbus,acc-next-ps = <248000>; -+ devbus,rd-setup-ps = <0>; -+ devbus,rd-hold-ps = <0>; -+ -+ /* Write parameters */ -+ devbus,sync-enable = <0>; -+ devbus,wr-high-ps = <60000>; -+ devbus,wr-low-ps = <60000>; -+ devbus,ale-wr-ps = <60000>; -+ -+ /* NOR 16 MiB */ -+ nor@0 { -+ compatible = "cfi-flash"; -+ reg = <0 0x1000000>; -+ bank-width = <2>; -+ }; -+ }; - - internal-regs { - serial@12000 { -@@ -126,35 +155,6 @@ - }; - }; - -- devbus-bootcs@10400 { -- status = "okay"; -- ranges = <0 0xf0000000 0x1000000>; /* @addr 0xf000000, size 0x1000000 */ -- -- /* Device Bus parameters are required */ -- -- /* Read parameters */ -- devbus,bus-width = <8>; -- devbus,turn-off-ps = <60000>; -- devbus,badr-skew-ps = <0>; -- devbus,acc-first-ps = <124000>; -- devbus,acc-next-ps = <248000>; -- devbus,rd-setup-ps = <0>; -- devbus,rd-hold-ps = <0>; -- -- /* Write parameters */ -- devbus,sync-enable = <0>; -- devbus,wr-high-ps = <60000>; -- devbus,wr-low-ps = <60000>; -- devbus,ale-wr-ps = <60000>; -- -- /* NOR 16 MiB */ -- nor@0 { -- compatible = "cfi-flash"; -- reg = <0 0x1000000>; -- bank-width = <2>; -- }; -- }; -- - pcie-controller { - status = "okay"; - ---- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts -+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts -@@ -28,7 +28,36 @@ - - soc { - ranges = ; -+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 -+ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000>; -+ -+ devbus-bootcs { -+ status = "okay"; -+ -+ /* Device Bus parameters are required */ -+ -+ /* Read parameters */ -+ devbus,bus-width = <8>; -+ devbus,turn-off-ps = <60000>; -+ devbus,badr-skew-ps = <0>; -+ devbus,acc-first-ps = <124000>; -+ devbus,acc-next-ps = <248000>; -+ devbus,rd-setup-ps = <0>; -+ devbus,rd-hold-ps = <0>; -+ -+ /* Write parameters */ -+ devbus,sync-enable = <0>; -+ devbus,wr-high-ps = <60000>; -+ devbus,wr-low-ps = <60000>; -+ devbus,ale-wr-ps = <60000>; -+ -+ /* NOR 128 MiB */ -+ nor@0 { -+ compatible = "cfi-flash"; -+ reg = <0 0x8000000>; -+ bank-width = <2>; -+ }; -+ }; - - internal-regs { - serial@12000 { -@@ -144,35 +173,6 @@ - status = "okay"; - }; - -- devbus-bootcs@10400 { -- status = "okay"; -- ranges = <0 0xf0000000 0x8000000>; /* @addr 0xf000000, size 0x8000000 */ -- -- /* Device Bus parameters are required */ -- -- /* Read parameters */ -- devbus,bus-width = <8>; -- devbus,turn-off-ps = <60000>; -- devbus,badr-skew-ps = <0>; -- devbus,acc-first-ps = <124000>; -- devbus,acc-next-ps = <248000>; -- devbus,rd-setup-ps = <0>; -- devbus,rd-hold-ps = <0>; -- -- /* Write parameters */ -- devbus,sync-enable = <0>; -- devbus,wr-high-ps = <60000>; -- devbus,wr-low-ps = <60000>; -- devbus,ale-wr-ps = <60000>; -- -- /* NOR 128 MiB */ -- nor@0 { -- compatible = "cfi-flash"; -- reg = <0 0x8000000>; -- bank-width = <2>; -- }; -- }; -- - pcie-controller { - status = "okay"; - /* Internal mini-PCIe connector */ diff --git a/target/linux/mvebu/patches-3.10/0059-ARM-mvebu-Relocate-Armada-370-XP-PCIe-device-tree-no.patch b/target/linux/mvebu/patches-3.10/0059-ARM-mvebu-Relocate-Armada-370-XP-PCIe-device-tree-no.patch deleted file mode 100644 index a7ce3ed7ff..0000000000 --- a/target/linux/mvebu/patches-3.10/0059-ARM-mvebu-Relocate-Armada-370-XP-PCIe-device-tree-no.patch +++ /dev/null @@ -1,1370 +0,0 @@ -From db5029d82c4f0685438ea38eb3fbaadac46a22ba Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Wed, 12 Jun 2013 18:02:19 -0300 -Subject: [PATCH 059/203] ARM: mvebu: Relocate Armada 370/XP PCIe device tree - nodes - -Now that mbus has been added to the device tree, it's possible to -move the PCIe nodes out of internal registers, placing it directly -below the mbus. This is a more accurate representation of the -hardware. - -Moving the PCIe nodes, we now need to introduce an extra cell to -encode the window target ID and attribute. Since this depends on -the PCIe port, we split the ranges translation entries, to correspond -to each MBus window. - -Signed-off-by: Thomas Petazzoni -Signed-off-by: Ezequiel Garcia -Tested-by: Andrew Lunn -Tested-by: Sebastian Hesselbarth ---- - arch/arm/boot/dts/armada-370-mirabox.dts | 32 +- - arch/arm/boot/dts/armada-370-xp.dtsi | 2 + - arch/arm/boot/dts/armada-370.dtsi | 101 +++--- - arch/arm/boot/dts/armada-xp-db.dts | 67 ++-- - arch/arm/boot/dts/armada-xp-gp.dts | 42 +-- - arch/arm/boot/dts/armada-xp-mv78230.dtsi | 222 ++++++------ - arch/arm/boot/dts/armada-xp-mv78260.dtsi | 261 ++++++++------- - arch/arm/boot/dts/armada-xp-mv78460.dtsi | 409 ++++++++++++----------- - arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 18 +- - 9 files changed, 612 insertions(+), 542 deletions(-) - ---- a/arch/arm/boot/dts/armada-370-mirabox.dts -+++ b/arch/arm/boot/dts/armada-370-mirabox.dts -@@ -28,6 +28,22 @@ - ranges = ; - -+ pcie-controller { -+ status = "okay"; -+ -+ /* Internal mini-PCIe connector */ -+ pcie@1,0 { -+ /* Port 0, Lane 0 */ -+ status = "okay"; -+ }; -+ -+ /* Connected on the PCB to a USB 3.0 XHCI controller */ -+ pcie@2,0 { -+ /* Port 1, Lane 0 */ -+ status = "okay"; -+ }; -+ }; -+ - internal-regs { - serial@12000 { - clock-frequency = <200000000>; -@@ -123,22 +139,6 @@ - reg = <0x25>; - }; - }; -- -- pcie-controller { -- status = "okay"; -- -- /* Internal mini-PCIe connector */ -- pcie@1,0 { -- /* Port 0, Lane 0 */ -- status = "okay"; -- }; -- -- /* Connected on the PCB to a USB 3.0 XHCI controller */ -- pcie@2,0 { -- /* Port 1, Lane 0 */ -- status = "okay"; -- }; -- }; - }; - }; - }; ---- a/arch/arm/boot/dts/armada-370-xp.dtsi -+++ b/arch/arm/boot/dts/armada-370-xp.dtsi -@@ -35,6 +35,8 @@ - #size-cells = <1>; - controller = <&mbusc>; - interrupt-parent = <&mpic>; -+ pcie-mem-aperture = <0xe0000000 0x8000000>; -+ pcie-io-aperture = <0xe8000000 0x100000>; - - devbus-bootcs { - compatible = "marvell,mvebu-devbus"; ---- a/arch/arm/boot/dts/armada-370.dtsi -+++ b/arch/arm/boot/dts/armada-370.dtsi -@@ -36,6 +36,59 @@ - reg = ; - }; - -+ pcie-controller { -+ compatible = "marvell,armada-370-pcie"; -+ status = "disabled"; -+ device_type = "pci"; -+ -+ #address-cells = <3>; -+ #size-cells = <2>; -+ -+ bus-range = <0x00 0xff>; -+ -+ ranges = -+ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 -+ 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 -+ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ -+ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ -+ 0x82000000 0x2 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ -+ 0x81000000 0x2 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */>; -+ -+ pcie@1,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; -+ reg = <0x0800 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 -+ 0x81000000 0 0 0x81000000 0x1 0 1 0>; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &mpic 58>; -+ marvell,pcie-port = <0>; -+ marvell,pcie-lane = <0>; -+ clocks = <&gateclk 5>; -+ status = "disabled"; -+ }; -+ -+ pcie@2,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; -+ reg = <0x1000 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 -+ 0x81000000 0 0 0x81000000 0x2 0 1 0>; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &mpic 62>; -+ marvell,pcie-port = <1>; -+ marvell,pcie-lane = <0>; -+ clocks = <&gateclk 9>; -+ status = "disabled"; -+ }; -+ }; -+ - internal-regs { - system-controller@18200 { - compatible = "marvell,armada-370-xp-system-controller"; -@@ -174,54 +227,6 @@ - 0x18304 0x4>; - status = "okay"; - }; -- -- pcie-controller { -- compatible = "marvell,armada-370-pcie"; -- status = "disabled"; -- device_type = "pci"; -- -- #address-cells = <3>; -- #size-cells = <2>; -- -- bus-range = <0x00 0xff>; -- -- ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ -- 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ -- 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ -- 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ -- -- pcie@1,0 { -- device_type = "pci"; -- assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; -- reg = <0x0800 0 0 0 0>; -- #address-cells = <3>; -- #size-cells = <2>; -- #interrupt-cells = <1>; -- ranges; -- interrupt-map-mask = <0 0 0 0>; -- interrupt-map = <0 0 0 0 &mpic 58>; -- marvell,pcie-port = <0>; -- marvell,pcie-lane = <0>; -- clocks = <&gateclk 5>; -- status = "disabled"; -- }; -- -- pcie@2,0 { -- device_type = "pci"; -- assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; -- reg = <0x1000 0 0 0 0>; -- #address-cells = <3>; -- #size-cells = <2>; -- #interrupt-cells = <1>; -- ranges; -- interrupt-map-mask = <0 0 0 0>; -- interrupt-map = <0 0 0 0 &mpic 62>; -- marvell,pcie-port = <1>; -- marvell,pcie-lane = <0>; -- clocks = <&gateclk 9>; -- status = "disabled"; -- }; -- }; - }; - }; - }; ---- a/arch/arm/boot/dts/armada-xp-db.dts -+++ b/arch/arm/boot/dts/armada-xp-db.dts -@@ -62,6 +62,39 @@ - }; - }; - -+ pcie-controller { -+ status = "okay"; -+ -+ /* -+ * All 6 slots are physically present as -+ * standard PCIe slots on the board. -+ */ -+ pcie@1,0 { -+ /* Port 0, Lane 0 */ -+ status = "okay"; -+ }; -+ pcie@2,0 { -+ /* Port 0, Lane 1 */ -+ status = "okay"; -+ }; -+ pcie@3,0 { -+ /* Port 0, Lane 2 */ -+ status = "okay"; -+ }; -+ pcie@4,0 { -+ /* Port 0, Lane 3 */ -+ status = "okay"; -+ }; -+ pcie@9,0 { -+ /* Port 2, Lane 0 */ -+ status = "okay"; -+ }; -+ pcie@10,0 { -+ /* Port 3, Lane 0 */ -+ status = "okay"; -+ }; -+ }; -+ - internal-regs { - serial@12000 { - clock-frequency = <250000000>; -@@ -155,40 +188,6 @@ - spi-max-frequency = <20000000>; - }; - }; -- -- pcie-controller { -- status = "okay"; -- -- /* -- * All 6 slots are physically present as -- * standard PCIe slots on the board. -- */ -- pcie@1,0 { -- /* Port 0, Lane 0 */ -- status = "okay"; -- }; -- pcie@2,0 { -- /* Port 0, Lane 1 */ -- status = "okay"; -- }; -- pcie@3,0 { -- /* Port 0, Lane 2 */ -- status = "okay"; -- }; -- pcie@4,0 { -- /* Port 0, Lane 3 */ -- status = "okay"; -- }; -- pcie@9,0 { -- /* Port 2, Lane 0 */ -- status = "okay"; -- }; -- pcie@10,0 { -- /* Port 3, Lane 0 */ -- status = "okay"; -- }; -- }; -- - }; - }; - }; ---- a/arch/arm/boot/dts/armada-xp-gp.dts -+++ b/arch/arm/boot/dts/armada-xp-gp.dts -@@ -71,6 +71,27 @@ - }; - }; - -+ pcie-controller { -+ status = "okay"; -+ -+ /* -+ * The 3 slots are physically present as -+ * standard PCIe slots on the board. -+ */ -+ pcie@1,0 { -+ /* Port 0, Lane 0 */ -+ status = "okay"; -+ }; -+ pcie@9,0 { -+ /* Port 2, Lane 0 */ -+ status = "okay"; -+ }; -+ pcie@10,0 { -+ /* Port 3, Lane 0 */ -+ status = "okay"; -+ }; -+ }; -+ - internal-regs { - serial@12000 { - clock-frequency = <250000000>; -@@ -154,27 +175,6 @@ - spi-max-frequency = <108000000>; - }; - }; -- -- pcie-controller { -- status = "okay"; -- -- /* -- * The 3 slots are physically present as -- * standard PCIe slots on the board. -- */ -- pcie@1,0 { -- /* Port 0, Lane 0 */ -- status = "okay"; -- }; -- pcie@9,0 { -- /* Port 2, Lane 0 */ -- status = "okay"; -- }; -- pcie@10,0 { -- /* Port 3, Lane 0 */ -- status = "okay"; -- }; -- }; - }; - }; - }; ---- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi -+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi -@@ -44,6 +44,124 @@ - }; - - soc { -+ /* -+ * MV78230 has 2 PCIe units Gen2.0: One unit can be -+ * configured as x4 or quad x1 lanes. One unit is -+ * x4/x1. -+ */ -+ pcie-controller { -+ compatible = "marvell,armada-xp-pcie"; -+ status = "disabled"; -+ device_type = "pci"; -+ -+ #address-cells = <3>; -+ #size-cells = <2>; -+ -+ bus-range = <0x00 0xff>; -+ -+ ranges = -+ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ -+ 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ -+ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ -+ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ -+ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ -+ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ -+ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ -+ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ -+ 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */ -+ 0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */ -+ 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ -+ 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ -+ 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ -+ 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ -+ 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>; -+ -+ pcie@1,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; -+ reg = <0x0800 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 -+ 0x81000000 0 0 0x81000000 0x1 0 1 0>; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &mpic 58>; -+ marvell,pcie-port = <0>; -+ marvell,pcie-lane = <0>; -+ clocks = <&gateclk 5>; -+ status = "disabled"; -+ }; -+ -+ pcie@2,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; -+ reg = <0x1000 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 -+ 0x81000000 0 0 0x81000000 0x2 0 1 0>; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &mpic 59>; -+ marvell,pcie-port = <0>; -+ marvell,pcie-lane = <1>; -+ clocks = <&gateclk 6>; -+ status = "disabled"; -+ }; -+ -+ pcie@3,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; -+ reg = <0x1800 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 -+ 0x81000000 0 0 0x81000000 0x3 0 1 0>; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &mpic 60>; -+ marvell,pcie-port = <0>; -+ marvell,pcie-lane = <2>; -+ clocks = <&gateclk 7>; -+ status = "disabled"; -+ }; -+ -+ pcie@4,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; -+ reg = <0x2000 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 -+ 0x81000000 0 0 0x81000000 0x4 0 1 0>; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &mpic 61>; -+ marvell,pcie-port = <0>; -+ marvell,pcie-lane = <3>; -+ clocks = <&gateclk 8>; -+ status = "disabled"; -+ }; -+ -+ pcie@9,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; -+ reg = <0x4800 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 -+ 0x81000000 0 0 0x81000000 0x9 0 1 0>; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &mpic 99>; -+ marvell,pcie-port = <2>; -+ marvell,pcie-lane = <0>; -+ clocks = <&gateclk 26>; -+ status = "disabled"; -+ }; -+ }; -+ - internal-regs { - pinctrl { - compatible = "marvell,mv78230-pinctrl"; -@@ -79,108 +197,6 @@ - }; - - /* -- * MV78230 has 2 PCIe units Gen2.0: One unit can be -- * configured as x4 or quad x1 lanes. One unit is -- * x1 only. -- */ -- pcie-controller { -- compatible = "marvell,armada-xp-pcie"; -- status = "disabled"; -- device_type = "pci"; -- --#address-cells = <3>; --#size-cells = <2>; -- -- bus-range = <0x00 0xff>; -- -- ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ -- 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */ -- 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */ -- 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */ -- 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ -- 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ -- 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ -- -- pcie@1,0 { -- device_type = "pci"; -- assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; -- reg = <0x0800 0 0 0 0>; -- #address-cells = <3>; -- #size-cells = <2>; -- #interrupt-cells = <1>; -- ranges; -- interrupt-map-mask = <0 0 0 0>; -- interrupt-map = <0 0 0 0 &mpic 58>; -- marvell,pcie-port = <0>; -- marvell,pcie-lane = <0>; -- clocks = <&gateclk 5>; -- status = "disabled"; -- }; -- -- pcie@2,0 { -- device_type = "pci"; -- assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; -- reg = <0x1000 0 0 0 0>; -- #address-cells = <3>; -- #size-cells = <2>; -- #interrupt-cells = <1>; -- ranges; -- interrupt-map-mask = <0 0 0 0>; -- interrupt-map = <0 0 0 0 &mpic 59>; -- marvell,pcie-port = <0>; -- marvell,pcie-lane = <1>; -- clocks = <&gateclk 6>; -- status = "disabled"; -- }; -- -- pcie@3,0 { -- device_type = "pci"; -- assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; -- reg = <0x1800 0 0 0 0>; -- #address-cells = <3>; -- #size-cells = <2>; -- #interrupt-cells = <1>; -- ranges; -- interrupt-map-mask = <0 0 0 0>; -- interrupt-map = <0 0 0 0 &mpic 60>; -- marvell,pcie-port = <0>; -- marvell,pcie-lane = <2>; -- clocks = <&gateclk 7>; -- status = "disabled"; -- }; -- -- pcie@4,0 { -- device_type = "pci"; -- assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; -- reg = <0x2000 0 0 0 0>; -- #address-cells = <3>; -- #size-cells = <2>; -- #interrupt-cells = <1>; -- ranges; -- interrupt-map-mask = <0 0 0 0>; -- interrupt-map = <0 0 0 0 &mpic 61>; -- marvell,pcie-port = <0>; -- marvell,pcie-lane = <3>; -- clocks = <&gateclk 8>; -- status = "disabled"; -- }; -- -- pcie@5,0 { -- device_type = "pci"; -- assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; -- reg = <0x2800 0 0 0 0>; -- #address-cells = <3>; -- #size-cells = <2>; -- #interrupt-cells = <1>; -- ranges; -- interrupt-map-mask = <0 0 0 0>; -- interrupt-map = <0 0 0 0 &mpic 62>; -- marvell,pcie-port = <1>; -- marvell,pcie-lane = <0>; -- clocks = <&gateclk 9>; -- status = "disabled"; -- }; -- }; - }; - }; - }; ---- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi -+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi -@@ -45,6 +45,145 @@ - }; - - soc { -+ /* -+ * MV78260 has 3 PCIe units Gen2.0: Two units can be -+ * configured as x4 or quad x1 lanes. One unit is -+ * x4/x1. -+ */ -+ pcie-controller { -+ compatible = "marvell,armada-xp-pcie"; -+ status = "disabled"; -+ device_type = "pci"; -+ -+ #address-cells = <3>; -+ #size-cells = <2>; -+ -+ bus-range = <0x00 0xff>; -+ -+ ranges = -+ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ -+ 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ -+ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ -+ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ -+ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ -+ 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ -+ 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */ -+ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ -+ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ -+ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ -+ 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */ -+ 0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */ -+ 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ -+ 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ -+ 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ -+ 0x82000000 0x9 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ -+ 0x81000000 0x9 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ -+ 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */ -+ 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>; -+ -+ pcie@1,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; -+ reg = <0x0800 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 -+ 0x81000000 0 0 0x81000000 0x1 0 1 0>; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &mpic 58>; -+ marvell,pcie-port = <0>; -+ marvell,pcie-lane = <0>; -+ clocks = <&gateclk 5>; -+ status = "disabled"; -+ }; -+ -+ pcie@2,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; -+ reg = <0x1000 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 -+ 0x81000000 0 0 0x81000000 0x2 0 1 0>; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &mpic 59>; -+ marvell,pcie-port = <0>; -+ marvell,pcie-lane = <1>; -+ clocks = <&gateclk 6>; -+ status = "disabled"; -+ }; -+ -+ pcie@3,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; -+ reg = <0x1800 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 -+ 0x81000000 0 0 0x81000000 0x3 0 1 0>; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &mpic 60>; -+ marvell,pcie-port = <0>; -+ marvell,pcie-lane = <2>; -+ clocks = <&gateclk 7>; -+ status = "disabled"; -+ }; -+ -+ pcie@4,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; -+ reg = <0x2000 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 -+ 0x81000000 0 0 0x81000000 0x4 0 1 0>; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &mpic 61>; -+ marvell,pcie-port = <0>; -+ marvell,pcie-lane = <3>; -+ clocks = <&gateclk 8>; -+ status = "disabled"; -+ }; -+ -+ pcie@9,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; -+ reg = <0x4800 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 -+ 0x81000000 0 0 0x81000000 0x9 0 1 0>; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &mpic 99>; -+ marvell,pcie-port = <2>; -+ marvell,pcie-lane = <0>; -+ clocks = <&gateclk 26>; -+ status = "disabled"; -+ }; -+ -+ pcie@10,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82000800 0 0x82000 0 0x2000>; -+ reg = <0x5000 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0 -+ 0x81000000 0 0 0x81000000 0xa 0 1 0>; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &mpic 103>; -+ marvell,pcie-port = <3>; -+ marvell,pcie-lane = <0>; -+ clocks = <&gateclk 27>; -+ status = "disabled"; -+ }; -+ }; -+ - internal-regs { - pinctrl { - compatible = "marvell,mv78260-pinctrl"; -@@ -98,177 +237,6 @@ - status = "disabled"; - }; - -- /* -- * MV78260 has 3 PCIe units Gen2.0: Two units can be -- * configured as x4 or quad x1 lanes. One unit is -- * x4 only. -- */ -- pcie-controller { -- compatible = "marvell,armada-xp-pcie"; -- status = "disabled"; -- device_type = "pci"; -- -- #address-cells = <3>; -- #size-cells = <2>; -- -- bus-range = <0x00 0xff>; -- -- ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ -- 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */ -- 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */ -- 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */ -- 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */ -- 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ -- 0x82000000 0 0x84000 0x84000 0 0x00002000 /* Port 1.1 registers */ -- 0x82000000 0 0x88000 0x88000 0 0x00002000 /* Port 1.2 registers */ -- 0x82000000 0 0x8c000 0x8c000 0 0x00002000 /* Port 1.3 registers */ -- 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ -- 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ -- -- pcie@1,0 { -- device_type = "pci"; -- assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; -- reg = <0x0800 0 0 0 0>; -- #address-cells = <3>; -- #size-cells = <2>; -- #interrupt-cells = <1>; -- ranges; -- interrupt-map-mask = <0 0 0 0>; -- interrupt-map = <0 0 0 0 &mpic 58>; -- marvell,pcie-port = <0>; -- marvell,pcie-lane = <0>; -- clocks = <&gateclk 5>; -- status = "disabled"; -- }; -- -- pcie@2,0 { -- device_type = "pci"; -- assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; -- reg = <0x1000 0 0 0 0>; -- #address-cells = <3>; -- #size-cells = <2>; -- #interrupt-cells = <1>; -- ranges; -- interrupt-map-mask = <0 0 0 0>; -- interrupt-map = <0 0 0 0 &mpic 59>; -- marvell,pcie-port = <0>; -- marvell,pcie-lane = <1>; -- clocks = <&gateclk 6>; -- status = "disabled"; -- }; -- -- pcie@3,0 { -- device_type = "pci"; -- assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; -- reg = <0x1800 0 0 0 0>; -- #address-cells = <3>; -- #size-cells = <2>; -- #interrupt-cells = <1>; -- ranges; -- interrupt-map-mask = <0 0 0 0>; -- interrupt-map = <0 0 0 0 &mpic 60>; -- marvell,pcie-port = <0>; -- marvell,pcie-lane = <2>; -- clocks = <&gateclk 7>; -- status = "disabled"; -- }; -- -- pcie@4,0 { -- device_type = "pci"; -- assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; -- reg = <0x2000 0 0 0 0>; -- #address-cells = <3>; -- #size-cells = <2>; -- #interrupt-cells = <1>; -- ranges; -- interrupt-map-mask = <0 0 0 0>; -- interrupt-map = <0 0 0 0 &mpic 61>; -- marvell,pcie-port = <0>; -- marvell,pcie-lane = <3>; -- clocks = <&gateclk 8>; -- status = "disabled"; -- }; -- -- pcie@5,0 { -- device_type = "pci"; -- assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; -- reg = <0x2800 0 0 0 0>; -- #address-cells = <3>; -- #size-cells = <2>; -- #interrupt-cells = <1>; -- ranges; -- interrupt-map-mask = <0 0 0 0>; -- interrupt-map = <0 0 0 0 &mpic 62>; -- marvell,pcie-port = <1>; -- marvell,pcie-lane = <0>; -- clocks = <&gateclk 9>; -- status = "disabled"; -- }; -- -- pcie@6,0 { -- device_type = "pci"; -- assigned-addresses = <0x82000800 0 0x84000 0 0x2000>; -- reg = <0x3000 0 0 0 0>; -- #address-cells = <3>; -- #size-cells = <2>; -- #interrupt-cells = <1>; -- ranges; -- interrupt-map-mask = <0 0 0 0>; -- interrupt-map = <0 0 0 0 &mpic 63>; -- marvell,pcie-port = <1>; -- marvell,pcie-lane = <1>; -- clocks = <&gateclk 10>; -- status = "disabled"; -- }; -- -- pcie@7,0 { -- device_type = "pci"; -- assigned-addresses = <0x82000800 0 0x88000 0 0x2000>; -- reg = <0x3800 0 0 0 0>; -- #address-cells = <3>; -- #size-cells = <2>; -- #interrupt-cells = <1>; -- ranges; -- interrupt-map-mask = <0 0 0 0>; -- interrupt-map = <0 0 0 0 &mpic 64>; -- marvell,pcie-port = <1>; -- marvell,pcie-lane = <2>; -- clocks = <&gateclk 11>; -- status = "disabled"; -- }; -- -- pcie@8,0 { -- device_type = "pci"; -- assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>; -- reg = <0x4000 0 0 0 0>; -- #address-cells = <3>; -- #size-cells = <2>; -- #interrupt-cells = <1>; -- ranges; -- interrupt-map-mask = <0 0 0 0>; -- interrupt-map = <0 0 0 0 &mpic 65>; -- marvell,pcie-port = <1>; -- marvell,pcie-lane = <3>; -- clocks = <&gateclk 12>; -- status = "disabled"; -- }; -- -- pcie@9,0 { -- device_type = "pci"; -- assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; -- reg = <0x4800 0 0 0 0>; -- #address-cells = <3>; -- #size-cells = <2>; -- #interrupt-cells = <1>; -- ranges; -- interrupt-map-mask = <0 0 0 0>; -- interrupt-map = <0 0 0 0 &mpic 99>; -- marvell,pcie-port = <2>; -- marvell,pcie-lane = <0>; -- clocks = <&gateclk 26>; -- status = "disabled"; -- }; -- }; - }; - }; - }; ---- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi -+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi -@@ -60,6 +60,227 @@ - }; - - soc { -+ /* -+ * MV78460 has 4 PCIe units Gen2.0: Two units can be -+ * configured as x4 or quad x1 lanes. Two units are -+ * x4/x1. -+ */ -+ pcie-controller { -+ compatible = "marvell,armada-xp-pcie"; -+ status = "disabled"; -+ device_type = "pci"; -+ -+ #address-cells = <3>; -+ #size-cells = <2>; -+ -+ bus-range = <0x00 0xff>; -+ -+ ranges = -+ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ -+ 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ -+ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ -+ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ -+ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ -+ 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ -+ 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */ -+ 0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */ -+ 0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */ -+ 0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */ -+ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ -+ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ -+ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ -+ 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */ -+ 0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */ -+ 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ -+ 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ -+ 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ -+ -+ 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ -+ 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ -+ 0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */ -+ 0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */ -+ 0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */ -+ 0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */ -+ 0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */ -+ 0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */ -+ -+ 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ -+ 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */ -+ -+ 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */ -+ 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>; -+ -+ pcie@1,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; -+ reg = <0x0800 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 -+ 0x81000000 0 0 0x81000000 0x1 0 1 0>; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &mpic 58>; -+ marvell,pcie-port = <0>; -+ marvell,pcie-lane = <0>; -+ clocks = <&gateclk 5>; -+ status = "disabled"; -+ }; -+ -+ pcie@2,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; -+ reg = <0x1000 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 -+ 0x81000000 0 0 0x81000000 0x2 0 1 0>; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &mpic 59>; -+ marvell,pcie-port = <0>; -+ marvell,pcie-lane = <1>; -+ clocks = <&gateclk 6>; -+ status = "disabled"; -+ }; -+ -+ pcie@3,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82001800 0 0x48000 0 0x2000>; -+ reg = <0x1800 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 -+ 0x81000000 0 0 0x81000000 0x3 0 1 0>; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &mpic 60>; -+ marvell,pcie-port = <0>; -+ marvell,pcie-lane = <2>; -+ clocks = <&gateclk 7>; -+ status = "disabled"; -+ }; -+ -+ pcie@4,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>; -+ reg = <0x2000 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 -+ 0x81000000 0 0 0x81000000 0x4 0 1 0>; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &mpic 61>; -+ marvell,pcie-port = <0>; -+ marvell,pcie-lane = <3>; -+ clocks = <&gateclk 8>; -+ status = "disabled"; -+ }; -+ -+ pcie@5,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; -+ reg = <0x2800 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 -+ 0x81000000 0 0 0x81000000 0x5 0 1 0>; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &mpic 62>; -+ marvell,pcie-port = <1>; -+ marvell,pcie-lane = <0>; -+ clocks = <&gateclk 9>; -+ status = "disabled"; -+ }; -+ -+ pcie@6,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82003000 0 0x84000 0 0x2000>; -+ reg = <0x3000 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0 -+ 0x81000000 0 0 0x81000000 0x6 0 1 0>; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &mpic 63>; -+ marvell,pcie-port = <1>; -+ marvell,pcie-lane = <1>; -+ clocks = <&gateclk 10>; -+ status = "disabled"; -+ }; -+ -+ pcie@7,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82003800 0 0x88000 0 0x2000>; -+ reg = <0x3800 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0 -+ 0x81000000 0 0 0x81000000 0x7 0 1 0>; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &mpic 64>; -+ marvell,pcie-port = <1>; -+ marvell,pcie-lane = <2>; -+ clocks = <&gateclk 11>; -+ status = "disabled"; -+ }; -+ -+ pcie@8,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>; -+ reg = <0x4000 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0 -+ 0x81000000 0 0 0x81000000 0x8 0 1 0>; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &mpic 65>; -+ marvell,pcie-port = <1>; -+ marvell,pcie-lane = <3>; -+ clocks = <&gateclk 12>; -+ status = "disabled"; -+ }; -+ -+ pcie@9,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82004800 0 0x42000 0 0x2000>; -+ reg = <0x4800 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 -+ 0x81000000 0 0 0x81000000 0x9 0 1 0>; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &mpic 99>; -+ marvell,pcie-port = <2>; -+ marvell,pcie-lane = <0>; -+ clocks = <&gateclk 26>; -+ status = "disabled"; -+ }; -+ -+ pcie@10,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82005000 0 0x82000 0 0x2000>; -+ reg = <0x5000 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0 -+ 0x81000000 0 0 0x81000000 0xa 0 1 0>; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &mpic 103>; -+ marvell,pcie-port = <3>; -+ marvell,pcie-lane = <0>; -+ clocks = <&gateclk 27>; -+ status = "disabled"; -+ }; -+ }; -+ - internal-regs { - pinctrl { - compatible = "marvell,mv78460-pinctrl"; -@@ -112,194 +333,6 @@ - clocks = <&gateclk 1>; - status = "disabled"; - }; -- -- /* -- * MV78460 has 4 PCIe units Gen2.0: Two units can be -- * configured as x4 or quad x1 lanes. Two units are -- * x4/x1. -- */ -- pcie-controller { -- compatible = "marvell,armada-xp-pcie"; -- status = "disabled"; -- device_type = "pci"; -- -- #address-cells = <3>; -- #size-cells = <2>; -- -- bus-range = <0x00 0xff>; -- -- ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ -- 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */ -- 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */ -- 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */ -- 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */ -- 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ -- 0x82000000 0 0x82000 0x82000 0 0x00002000 /* Port 3.0 registers */ -- 0x82000000 0 0x84000 0x84000 0 0x00002000 /* Port 1.1 registers */ -- 0x82000000 0 0x88000 0x88000 0 0x00002000 /* Port 1.2 registers */ -- 0x82000000 0 0x8c000 0x8c000 0 0x00002000 /* Port 1.3 registers */ -- 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ -- 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ -- -- pcie@1,0 { -- device_type = "pci"; -- assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; -- reg = <0x0800 0 0 0 0>; -- #address-cells = <3>; -- #size-cells = <2>; -- #interrupt-cells = <1>; -- ranges; -- interrupt-map-mask = <0 0 0 0>; -- interrupt-map = <0 0 0 0 &mpic 58>; -- marvell,pcie-port = <0>; -- marvell,pcie-lane = <0>; -- clocks = <&gateclk 5>; -- status = "disabled"; -- }; -- -- pcie@2,0 { -- device_type = "pci"; -- assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; -- reg = <0x1000 0 0 0 0>; -- #address-cells = <3>; -- #size-cells = <2>; -- #interrupt-cells = <1>; -- ranges; -- interrupt-map-mask = <0 0 0 0>; -- interrupt-map = <0 0 0 0 &mpic 59>; -- marvell,pcie-port = <0>; -- marvell,pcie-lane = <1>; -- clocks = <&gateclk 6>; -- status = "disabled"; -- }; -- -- pcie@3,0 { -- device_type = "pci"; -- assigned-addresses = <0x82001800 0 0x48000 0 0x2000>; -- reg = <0x1800 0 0 0 0>; -- #address-cells = <3>; -- #size-cells = <2>; -- #interrupt-cells = <1>; -- ranges; -- interrupt-map-mask = <0 0 0 0>; -- interrupt-map = <0 0 0 0 &mpic 60>; -- marvell,pcie-port = <0>; -- marvell,pcie-lane = <2>; -- clocks = <&gateclk 7>; -- status = "disabled"; -- }; -- -- pcie@4,0 { -- device_type = "pci"; -- assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>; -- reg = <0x2000 0 0 0 0>; -- #address-cells = <3>; -- #size-cells = <2>; -- #interrupt-cells = <1>; -- ranges; -- interrupt-map-mask = <0 0 0 0>; -- interrupt-map = <0 0 0 0 &mpic 61>; -- marvell,pcie-port = <0>; -- marvell,pcie-lane = <3>; -- clocks = <&gateclk 8>; -- status = "disabled"; -- }; -- -- pcie@5,0 { -- device_type = "pci"; -- assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; -- reg = <0x2800 0 0 0 0>; -- #address-cells = <3>; -- #size-cells = <2>; -- #interrupt-cells = <1>; -- ranges; -- interrupt-map-mask = <0 0 0 0>; -- interrupt-map = <0 0 0 0 &mpic 62>; -- marvell,pcie-port = <1>; -- marvell,pcie-lane = <0>; -- clocks = <&gateclk 9>; -- status = "disabled"; -- }; -- -- pcie@6,0 { -- device_type = "pci"; -- assigned-addresses = <0x82003000 0 0x84000 0 0x2000>; -- reg = <0x3000 0 0 0 0>; -- #address-cells = <3>; -- #size-cells = <2>; -- #interrupt-cells = <1>; -- ranges; -- interrupt-map-mask = <0 0 0 0>; -- interrupt-map = <0 0 0 0 &mpic 63>; -- marvell,pcie-port = <1>; -- marvell,pcie-lane = <1>; -- clocks = <&gateclk 10>; -- status = "disabled"; -- }; -- -- pcie@7,0 { -- device_type = "pci"; -- assigned-addresses = <0x82003800 0 0x88000 0 0x2000>; -- reg = <0x3800 0 0 0 0>; -- #address-cells = <3>; -- #size-cells = <2>; -- #interrupt-cells = <1>; -- ranges; -- interrupt-map-mask = <0 0 0 0>; -- interrupt-map = <0 0 0 0 &mpic 64>; -- marvell,pcie-port = <1>; -- marvell,pcie-lane = <2>; -- clocks = <&gateclk 11>; -- status = "disabled"; -- }; -- -- pcie@8,0 { -- device_type = "pci"; -- assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>; -- reg = <0x4000 0 0 0 0>; -- #address-cells = <3>; -- #size-cells = <2>; -- #interrupt-cells = <1>; -- ranges; -- interrupt-map-mask = <0 0 0 0>; -- interrupt-map = <0 0 0 0 &mpic 65>; -- marvell,pcie-port = <1>; -- marvell,pcie-lane = <3>; -- clocks = <&gateclk 12>; -- status = "disabled"; -- }; -- pcie@9,0 { -- device_type = "pci"; -- assigned-addresses = <0x82004800 0 0x42000 0 0x2000>; -- reg = <0x4800 0 0 0 0>; -- #address-cells = <3>; -- #size-cells = <2>; -- #interrupt-cells = <1>; -- ranges; -- interrupt-map-mask = <0 0 0 0>; -- interrupt-map = <0 0 0 0 &mpic 99>; -- marvell,pcie-port = <2>; -- marvell,pcie-lane = <0>; -- clocks = <&gateclk 26>; -- status = "disabled"; -- }; -- -- pcie@10,0 { -- device_type = "pci"; -- assigned-addresses = <0x82005000 0 0x82000 0 0x2000>; -- reg = <0x5000 0 0 0 0>; -- #address-cells = <3>; -- #size-cells = <2>; -- #interrupt-cells = <1>; -- ranges; -- interrupt-map-mask = <0 0 0 0>; -- interrupt-map = <0 0 0 0 &mpic 103>; -- marvell,pcie-port = <3>; -- marvell,pcie-lane = <0>; -- clocks = <&gateclk 27>; -- status = "disabled"; -- }; -- }; - }; - }; - }; ---- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts -+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts -@@ -59,6 +59,15 @@ - }; - }; - -+ pcie-controller { -+ status = "okay"; -+ /* Internal mini-PCIe connector */ -+ pcie@1,0 { -+ /* Port 0, Lane 0 */ -+ status = "okay"; -+ }; -+ }; -+ - internal-regs { - serial@12000 { - clock-frequency = <250000000>; -@@ -172,15 +181,6 @@ - usb@51000 { - status = "okay"; - }; -- -- pcie-controller { -- status = "okay"; -- /* Internal mini-PCIe connector */ -- pcie@1,0 { -- /* Port 0, Lane 0 */ -- status = "okay"; -- }; -- }; - }; - }; - }; diff --git a/target/linux/mvebu/patches-3.10/0060-ARM-kirkwood-Split-DT-and-legacy-MBus-initialization.patch b/target/linux/mvebu/patches-3.10/0060-ARM-kirkwood-Split-DT-and-legacy-MBus-initialization.patch deleted file mode 100644 index 7ab5be59d4..0000000000 --- a/target/linux/mvebu/patches-3.10/0060-ARM-kirkwood-Split-DT-and-legacy-MBus-initialization.patch +++ /dev/null @@ -1,52 +0,0 @@ -From d1989c73eb770891635cc644f091d7524bbfd696 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Tue, 23 Jul 2013 07:42:09 -0300 -Subject: [PATCH 060/203] ARM: kirkwood: Split DT and legacy MBus - initialization - -This commit replaces the legacy MBus initialization with the new -DT-based in Kirkwood. For boards that are not yet converted to DT, -we keep the legacy initialization. - -Signed-off-by: Ezequiel Garcia -Tested-by: Andrew Lunn -Tested-by: Sebastian Hesselbarth ---- - arch/arm/mach-kirkwood/board-dt.c | 1 + - arch/arm/mach-kirkwood/common.c | 8 ++++---- - 2 files changed, 5 insertions(+), 4 deletions(-) - ---- a/arch/arm/mach-kirkwood/board-dt.c -+++ b/arch/arm/mach-kirkwood/board-dt.c -@@ -93,6 +93,7 @@ static void __init kirkwood_dt_init(void - */ - writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG); - -+ BUG_ON(mvebu_mbus_dt_init()); - kirkwood_setup_wins(); - - kirkwood_l2_init(); ---- a/arch/arm/mach-kirkwood/common.c -+++ b/arch/arm/mach-kirkwood/common.c -@@ -527,10 +527,6 @@ void __init kirkwood_cpuidle_init(void) - void __init kirkwood_init_early(void) - { - orion_time_set_base(TIMER_VIRT_BASE); -- -- mvebu_mbus_init("marvell,kirkwood-mbus", -- BRIDGE_WINS_BASE, BRIDGE_WINS_SZ, -- DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ); - } - - int kirkwood_tclk; -@@ -703,6 +699,10 @@ void __init kirkwood_init(void) - */ - writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG); - -+ BUG_ON(mvebu_mbus_init("marvell,kirkwood-mbus", -+ BRIDGE_WINS_BASE, BRIDGE_WINS_SZ, -+ DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ)); -+ - kirkwood_setup_wins(); - - kirkwood_l2_init(); diff --git a/target/linux/mvebu/patches-3.10/0061-ARM-kirkwood-Use-the-preprocessor-on-device-tree-fil.patch b/target/linux/mvebu/patches-3.10/0061-ARM-kirkwood-Use-the-preprocessor-on-device-tree-fil.patch deleted file mode 100644 index 190f31f340..0000000000 --- a/target/linux/mvebu/patches-3.10/0061-ARM-kirkwood-Use-the-preprocessor-on-device-tree-fil.patch +++ /dev/null @@ -1,485 +0,0 @@ -From 67bbed6edc12a5f239435c182d9c56ce2c930d87 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Tue, 23 Jul 2013 07:45:49 -0300 -Subject: [PATCH 061/203] ARM: kirkwood: Use the preprocessor on device tree - files - -Signed-off-by: Ezequiel Garcia -Tested-by: Andrew Lunn -Tested-by: Sebastian Hesselbarth ---- - arch/arm/boot/dts/kirkwood-cloudbox.dts | 4 +-- - arch/arm/boot/dts/kirkwood-dns320.dts | 2 +- - arch/arm/boot/dts/kirkwood-dns325.dts | 2 +- - arch/arm/boot/dts/kirkwood-dnskw.dtsi | 4 +-- - arch/arm/boot/dts/kirkwood-dockstar.dts | 4 +-- - arch/arm/boot/dts/kirkwood-dreamplug.dts | 4 +-- - arch/arm/boot/dts/kirkwood-goflexnet.dts | 4 +-- - .../arm/boot/dts/kirkwood-guruplug-server-plus.dts | 4 +-- - arch/arm/boot/dts/kirkwood-ib62x0.dts | 4 +-- - arch/arm/boot/dts/kirkwood-iconnect.dts | 4 +-- - arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts | 4 +-- - arch/arm/boot/dts/kirkwood-is2.dts | 2 +- - arch/arm/boot/dts/kirkwood-km_kirkwood.dts | 4 +-- - arch/arm/boot/dts/kirkwood-lschlv2.dts | 2 +- - arch/arm/boot/dts/kirkwood-lsxhl.dts | 2 +- - arch/arm/boot/dts/kirkwood-lsxl.dtsi | 4 +-- - arch/arm/boot/dts/kirkwood-mplcec4.dts | 4 +-- - .../boot/dts/kirkwood-netgear_readynas_duo_v2.dts | 4 +-- - arch/arm/boot/dts/kirkwood-ns2-common.dtsi | 4 +-- - arch/arm/boot/dts/kirkwood-ns2.dts | 2 +- - arch/arm/boot/dts/kirkwood-ns2lite.dts | 2 +- - arch/arm/boot/dts/kirkwood-ns2max.dts | 2 +- - arch/arm/boot/dts/kirkwood-ns2mini.dts | 2 +- - arch/arm/boot/dts/kirkwood-nsa310.dts | 40 +++++++++++++--------- - arch/arm/boot/dts/kirkwood-openblocks_a6.dts | 4 +-- - arch/arm/boot/dts/kirkwood-topkick.dts | 4 +-- - arch/arm/boot/dts/kirkwood-ts219-6281.dts | 13 +++---- - arch/arm/boot/dts/kirkwood-ts219-6282.dts | 21 ++++++++---- - 28 files changed, 86 insertions(+), 70 deletions(-) - ---- a/arch/arm/boot/dts/kirkwood-cloudbox.dts -+++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts -@@ -1,7 +1,7 @@ - /dts-v1/; - --/include/ "kirkwood.dtsi" --/include/ "kirkwood-6281.dtsi" -+#include "kirkwood.dtsi" -+#include "kirkwood-6281.dtsi" - - / { - model = "LaCie CloudBox"; ---- a/arch/arm/boot/dts/kirkwood-dns320.dts -+++ b/arch/arm/boot/dts/kirkwood-dns320.dts -@@ -1,6 +1,6 @@ - /dts-v1/; - --/include/ "kirkwood-dnskw.dtsi" -+#include "kirkwood-dnskw.dtsi" - - / { - model = "D-Link DNS-320 NAS (Rev A1)"; ---- a/arch/arm/boot/dts/kirkwood-dns325.dts -+++ b/arch/arm/boot/dts/kirkwood-dns325.dts -@@ -1,6 +1,6 @@ - /dts-v1/; - --/include/ "kirkwood-dnskw.dtsi" -+#include "kirkwood-dnskw.dtsi" - - / { - model = "D-Link DNS-325 NAS (Rev A1)"; ---- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi -+++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi -@@ -1,5 +1,5 @@ --/include/ "kirkwood.dtsi" --/include/ "kirkwood-6281.dtsi" -+#include "kirkwood.dtsi" -+#include "kirkwood-6281.dtsi" - - / { - model = "D-Link DNS NASes (kirkwood-based)"; ---- a/arch/arm/boot/dts/kirkwood-dockstar.dts -+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts -@@ -1,7 +1,7 @@ - /dts-v1/; - --/include/ "kirkwood.dtsi" --/include/ "kirkwood-6281.dtsi" -+#include "kirkwood.dtsi" -+#include "kirkwood-6281.dtsi" - - / { - model = "Seagate FreeAgent Dockstar"; ---- a/arch/arm/boot/dts/kirkwood-dreamplug.dts -+++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts -@@ -1,7 +1,7 @@ - /dts-v1/; - --/include/ "kirkwood.dtsi" --/include/ "kirkwood-6281.dtsi" -+#include "kirkwood.dtsi" -+#include "kirkwood-6281.dtsi" - - / { - model = "Globalscale Technologies Dreamplug"; ---- a/arch/arm/boot/dts/kirkwood-goflexnet.dts -+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts -@@ -1,7 +1,7 @@ - /dts-v1/; - --/include/ "kirkwood.dtsi" --/include/ "kirkwood-6281.dtsi" -+#include "kirkwood.dtsi" -+#include "kirkwood-6281.dtsi" - - / { - model = "Seagate GoFlex Net"; ---- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts -+++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts -@@ -1,7 +1,7 @@ - /dts-v1/; - --/include/ "kirkwood.dtsi" --/include/ "kirkwood-6281.dtsi" -+#include "kirkwood.dtsi" -+#include "kirkwood-6281.dtsi" - - / { - model = "Globalscale Technologies Guruplug Server Plus"; ---- a/arch/arm/boot/dts/kirkwood-ib62x0.dts -+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts -@@ -1,7 +1,7 @@ - /dts-v1/; - --/include/ "kirkwood.dtsi" --/include/ "kirkwood-6281.dtsi" -+#include "kirkwood.dtsi" -+#include "kirkwood-6281.dtsi" - - / { - model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)"; ---- a/arch/arm/boot/dts/kirkwood-iconnect.dts -+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts -@@ -1,7 +1,7 @@ - /dts-v1/; - --/include/ "kirkwood.dtsi" --/include/ "kirkwood-6281.dtsi" -+#include "kirkwood.dtsi" -+#include "kirkwood-6281.dtsi" - - / { - model = "Iomega Iconnect"; ---- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts -+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts -@@ -1,7 +1,7 @@ - /dts-v1/; - --/include/ "kirkwood.dtsi" --/include/ "kirkwood-6281.dtsi" -+#include "kirkwood.dtsi" -+#include "kirkwood-6281.dtsi" - - / { - model = "Iomega StorCenter ix2-200"; ---- a/arch/arm/boot/dts/kirkwood-is2.dts -+++ b/arch/arm/boot/dts/kirkwood-is2.dts -@@ -1,6 +1,6 @@ - /dts-v1/; - --/include/ "kirkwood-ns2-common.dtsi" -+#include "kirkwood-ns2-common.dtsi" - - / { - model = "LaCie Internet Space v2"; ---- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts -+++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts -@@ -1,7 +1,7 @@ - /dts-v1/; - --/include/ "kirkwood.dtsi" --/include/ "kirkwood-98dx4122.dtsi" -+#include "kirkwood.dtsi" -+#include "kirkwood-98dx4122.dtsi" - - / { - model = "Keymile Kirkwood Reference Design"; ---- a/arch/arm/boot/dts/kirkwood-lschlv2.dts -+++ b/arch/arm/boot/dts/kirkwood-lschlv2.dts -@@ -1,6 +1,6 @@ - /dts-v1/; - --/include/ "kirkwood-lsxl.dtsi" -+#include "kirkwood-lsxl.dtsi" - - / { - model = "Buffalo Linkstation LS-CHLv2"; ---- a/arch/arm/boot/dts/kirkwood-lsxhl.dts -+++ b/arch/arm/boot/dts/kirkwood-lsxhl.dts -@@ -1,6 +1,6 @@ - /dts-v1/; - --/include/ "kirkwood-lsxl.dtsi" -+#include "kirkwood-lsxl.dtsi" - - / { - model = "Buffalo Linkstation LS-XHL"; ---- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi -+++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi -@@ -1,5 +1,5 @@ --/include/ "kirkwood.dtsi" --/include/ "kirkwood-6281.dtsi" -+#include "kirkwood.dtsi" -+#include "kirkwood-6281.dtsi" - - / { - chosen { ---- a/arch/arm/boot/dts/kirkwood-mplcec4.dts -+++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts -@@ -1,7 +1,7 @@ - /dts-v1/; - --/include/ "kirkwood.dtsi" --/include/ "kirkwood-6281.dtsi" -+#include "kirkwood.dtsi" -+#include "kirkwood-6281.dtsi" - - / { - model = "MPL CEC4"; ---- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts -+++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts -@@ -1,7 +1,7 @@ - /dts-v1/; - --/include/ "kirkwood.dtsi" --/include/ "kirkwood-6282.dtsi" -+#include "kirkwood.dtsi" -+#include "kirkwood-6282.dtsi" - - / { - model = "NETGEAR ReadyNAS Duo v2"; ---- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi -+++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi -@@ -1,5 +1,5 @@ --/include/ "kirkwood.dtsi" --/include/ "kirkwood-6281.dtsi" -+#include "kirkwood.dtsi" -+#include "kirkwood-6281.dtsi" - - / { - chosen { ---- a/arch/arm/boot/dts/kirkwood-ns2.dts -+++ b/arch/arm/boot/dts/kirkwood-ns2.dts -@@ -1,6 +1,6 @@ - /dts-v1/; - --/include/ "kirkwood-ns2-common.dtsi" -+#include "kirkwood-ns2-common.dtsi" - - / { - model = "LaCie Network Space v2"; ---- a/arch/arm/boot/dts/kirkwood-ns2lite.dts -+++ b/arch/arm/boot/dts/kirkwood-ns2lite.dts -@@ -1,6 +1,6 @@ - /dts-v1/; - --/include/ "kirkwood-ns2-common.dtsi" -+#include "kirkwood-ns2-common.dtsi" - - / { - model = "LaCie Network Space Lite v2"; ---- a/arch/arm/boot/dts/kirkwood-ns2max.dts -+++ b/arch/arm/boot/dts/kirkwood-ns2max.dts -@@ -1,6 +1,6 @@ - /dts-v1/; - --/include/ "kirkwood-ns2-common.dtsi" -+#include "kirkwood-ns2-common.dtsi" - - / { - model = "LaCie Network Space Max v2"; ---- a/arch/arm/boot/dts/kirkwood-ns2mini.dts -+++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts -@@ -1,6 +1,6 @@ - /dts-v1/; - --/include/ "kirkwood-ns2-common.dtsi" -+#include "kirkwood-ns2-common.dtsi" - - / { - /* This machine is embedded in the first LaCie CloudBox product. */ ---- a/arch/arm/boot/dts/kirkwood-nsa310.dts -+++ b/arch/arm/boot/dts/kirkwood-nsa310.dts -@@ -1,6 +1,7 @@ - /dts-v1/; - --/include/ "kirkwood.dtsi" -+#include "kirkwood.dtsi" -+#include "kirkwood-6281.dtsi" - - / { - model = "ZyXEL NSA310"; -@@ -17,22 +18,7 @@ - - ocp@f1000000 { - pinctrl: pinctrl@10000 { -- pinctrl-0 = < &pmx_led_esata_green -- &pmx_led_esata_red -- &pmx_led_usb_green -- &pmx_led_usb_red -- &pmx_usb_power_off -- &pmx_led_sys_green -- &pmx_led_sys_red -- &pmx_btn_reset -- &pmx_btn_copy -- &pmx_led_copy_green -- &pmx_led_copy_red -- &pmx_led_hdd_green -- &pmx_led_hdd_red -- &pmx_unknown -- &pmx_btn_power -- &pmx_pwr_off >; -+ pinctrl-0 = <&pmx_unknown>; - pinctrl-names = "default"; - - pmx_led_esata_green: pmx-led-esata-green { -@@ -176,12 +162,22 @@ - reg = <0x5040000 0x2fc0000>; - }; - }; -+ -+ pcie-controller { -+ status = "okay"; -+ -+ pcie@1,0 { -+ status = "okay"; -+ }; -+ }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; -+ pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>; -+ pinctrl-names = "default"; - - button@1 { - label = "Power Button"; -@@ -202,6 +198,12 @@ - - gpio-leds { - compatible = "gpio-leds"; -+ pinctrl-0 = <&pmx_led_esata_green &pmx_led_esata_red -+ &pmx_led_usb_green &pmx_led_usb_red -+ &pmx_led_sys_green &pmx_led_sys_red -+ &pmx_led_copy_green &pmx_led_copy_red -+ &pmx_led_hdd_green &pmx_led_hdd_red>; -+ pinctrl-names = "default"; - - green-sys { - label = "nsa310:green:sys"; -@@ -247,6 +249,8 @@ - - gpio_poweroff { - compatible = "gpio-poweroff"; -+ pinctrl-0 = <&pmx_pwr_off>; -+ pinctrl-names = "default"; - gpios = <&gpio1 16 0>; - }; - -@@ -254,6 +258,8 @@ - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; -+ pinctrl-0 = <&pmx_usb_power_off>; -+ pinctrl-names = "default"; - - usb0_power_off: regulator@1 { - compatible = "regulator-fixed"; ---- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts -+++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts -@@ -1,7 +1,7 @@ - /dts-v1/; - --/include/ "kirkwood.dtsi" --/include/ "kirkwood-6282.dtsi" -+#include "kirkwood.dtsi" -+#include "kirkwood-6282.dtsi" - - / { - model = "Plat'Home OpenBlocksA6"; ---- a/arch/arm/boot/dts/kirkwood-topkick.dts -+++ b/arch/arm/boot/dts/kirkwood-topkick.dts -@@ -1,7 +1,7 @@ - /dts-v1/; - --/include/ "kirkwood.dtsi" --/include/ "kirkwood-6282.dtsi" -+#include "kirkwood.dtsi" -+#include "kirkwood-6282.dtsi" - - / { - model = "Univeral Scientific Industrial Co. Topkick-1281P2"; ---- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts -+++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts -@@ -1,16 +1,14 @@ - /dts-v1/; - --/include/ "kirkwood-ts219.dtsi" --/include/ "kirkwood-6281.dtsi" -+#include "kirkwood.dtsi" -+#include "kirkwood-6281.dtsi" -+#include "kirkwood-ts219.dtsi" - - / { - ocp@f1000000 { - pinctrl: pinctrl@10000 { - -- pinctrl-0 = < &pmx_uart0 &pmx_uart1 &pmx_spi -- &pmx_twsi0 &pmx_sata0 &pmx_sata1 -- &pmx_ram_size &pmx_reset_button -- &pmx_USB_copy_button &pmx_board_id>; -+ pinctrl-0 = <&pmx_ram_size &pmx_board_id>; - pinctrl-names = "default"; - - pmx_ram_size: pmx-ram-size { -@@ -38,6 +36,9 @@ - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; -+ pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>; -+ pinctrl-names = "default"; -+ - button@1 { - label = "USB Copy"; - linux,code = <133>; ---- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts -+++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts -@@ -1,16 +1,14 @@ - /dts-v1/; - --/include/ "kirkwood-ts219.dtsi" --/include/ "kirkwood-6282.dtsi" -+#include "kirkwood.dtsi" -+#include "kirkwood-6282.dtsi" -+#include "kirkwood-ts219.dtsi" - - / { - ocp@f1000000 { - pinctrl: pinctrl@10000 { - -- pinctrl-0 = < &pmx_uart0 &pmx_uart1 &pmx_spi -- &pmx_twsi0 &pmx_sata0 &pmx_sata1 -- &pmx_ram_size &pmx_reset_button -- &pmx_USB_copy_button &pmx_board_id>; -+ pinctrl-0 = <&pmx_ram_size &pmx_board_id>; - pinctrl-names = "default"; - - pmx_ram_size: pmx-ram-size { -@@ -32,12 +30,23 @@ - marvell,function = "gpio"; - }; - }; -+ pcie-controller { -+ status = "okay"; -+ -+ pcie@2,0 { -+ status = "okay"; -+ }; -+ }; -+ - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; -+ pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>; -+ pinctrl-names = "default"; -+ - button@1 { - label = "USB Copy"; - linux,code = <133>; diff --git a/target/linux/mvebu/patches-3.10/0062-ARM-kirkwood-Introduce-MBus-DT-node.patch b/target/linux/mvebu/patches-3.10/0062-ARM-kirkwood-Introduce-MBus-DT-node.patch deleted file mode 100644 index fcedff3225..0000000000 --- a/target/linux/mvebu/patches-3.10/0062-ARM-kirkwood-Introduce-MBus-DT-node.patch +++ /dev/null @@ -1,41 +0,0 @@ -From 9d4a304873c9f6a8bbf78cba329985768a1c6c93 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Tue, 23 Jul 2013 07:48:04 -0300 -Subject: [PATCH 062/203] ARM: kirkwood: Introduce MBus DT node - -Add a minimal MBus node, just to allow the MBus driver to probe. -Follow-up patches will migrate the rest of the nodes appropriately. - -Signed-off-by: Ezequiel Garcia -Tested-by: Andrew Lunn -Tested-by: Sebastian Hesselbarth ---- - arch/arm/boot/dts/kirkwood.dtsi | 10 ++++++++++ - 1 file changed, 10 insertions(+) - ---- a/arch/arm/boot/dts/kirkwood.dtsi -+++ b/arch/arm/boot/dts/kirkwood.dtsi -@@ -16,6 +16,11 @@ - <0xf1020214 0x04>; - }; - -+ mbus { -+ compatible = "marvell,kirkwood-mbus", "simple-bus"; -+ controller = <&mbusc>; -+ }; -+ - ocp@f1000000 { - compatible = "simple-bus"; - ranges = <0x00000000 0xf1000000 0x4000000 -@@ -23,6 +28,11 @@ - #address-cells = <1>; - #size-cells = <1>; - -+ mbusc: mbus-controller@20000 { -+ compatible = "marvell,mbus-controller"; -+ reg = <0x20000 0x80>, <0x1500 0x20>; -+ }; -+ - core_clk: core-clocks@10030 { - compatible = "marvell,kirkwood-core-clock"; - reg = <0x10030 0x4>; diff --git a/target/linux/mvebu/patches-3.10/0063-ARM-kirkwood-Introduce-MBUS_ID.patch b/target/linux/mvebu/patches-3.10/0063-ARM-kirkwood-Introduce-MBUS_ID.patch deleted file mode 100644 index 2b9c967d56..0000000000 --- a/target/linux/mvebu/patches-3.10/0063-ARM-kirkwood-Introduce-MBUS_ID.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 32016796bb28ebf748851c166b03159600aa9a00 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Tue, 23 Jul 2013 08:33:39 -0300 -Subject: [PATCH 063/203] ARM: kirkwood: Introduce MBUS_ID - -This macro is used to define window's target ID and attribute cells -for the MBus ranges entries. - -Signed-off-by: Ezequiel Garcia -Tested-by: Andrew Lunn -Tested-by: Sebastian Hesselbarth ---- - arch/arm/boot/dts/kirkwood.dtsi | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/arch/arm/boot/dts/kirkwood.dtsi -+++ b/arch/arm/boot/dts/kirkwood.dtsi -@@ -1,5 +1,7 @@ - /include/ "skeleton.dtsi" - -+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) -+ - / { - compatible = "marvell,kirkwood"; - interrupt-parent = <&intc>; diff --git a/target/linux/mvebu/patches-3.10/0064-ARM-kirkwood-Relocate-PCIe-device-tree-nodes.patch b/target/linux/mvebu/patches-3.10/0064-ARM-kirkwood-Relocate-PCIe-device-tree-nodes.patch deleted file mode 100644 index be4d3ab16f..0000000000 --- a/target/linux/mvebu/patches-3.10/0064-ARM-kirkwood-Relocate-PCIe-device-tree-nodes.patch +++ /dev/null @@ -1,301 +0,0 @@ -From ae23894bcb163d1f91483b9566dc077f1e863af6 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Tue, 23 Jul 2013 08:44:00 -0300 -Subject: [PATCH 064/203] ARM: kirkwood: Relocate PCIe device tree nodes - -Now that mbus has been added to the device tree, it's possible to -move the PCIe nodes out of the ocp node, placing it directly -below the mbus. This is a more accurate representation of the hardware. - -Moving the PCIe nodes, we now need to introduce an extra cell to -encode the window target ID and attribute. Since this depends on -the PCIe port, we split the ranges translation entries, to -correspond to each MBus window. - -In addition, we encode the PCIe memory and I/O apertures in the MBus -node, according to the MBus DT binding specification. The choice made -is 0xe0000000-0xf0000000 for memory space, and 0xf200000-0xf2100000 for -I/O space. These apertures can be changed in each per-board DT file. - -Signed-off-by: Ezequiel Garcia -Tested-by: Andrew Lunn -Tested-by: Sebastian Hesselbarth ---- - arch/arm/boot/dts/kirkwood-6281.dtsi | 35 ++++++++++++++ - arch/arm/boot/dts/kirkwood-6282.dtsi | 55 ++++++++++++++++++++++ - arch/arm/boot/dts/kirkwood-iconnect.dts | 11 +++++ - arch/arm/boot/dts/kirkwood-mplcec4.dts | 11 +++++ - .../boot/dts/kirkwood-netgear_readynas_duo_v2.dts | 11 +++++ - arch/arm/boot/dts/kirkwood-nsa310.dts | 19 ++++---- - arch/arm/boot/dts/kirkwood-ts219-6282.dts | 19 ++++---- - arch/arm/boot/dts/kirkwood-ts219.dtsi | 10 ++++ - arch/arm/boot/dts/kirkwood.dtsi | 4 ++ - 9 files changed, 159 insertions(+), 16 deletions(-) - ---- a/arch/arm/boot/dts/kirkwood-6281.dtsi -+++ b/arch/arm/boot/dts/kirkwood-6281.dtsi -@@ -1,4 +1,39 @@ - / { -+ mbus { -+ pcie-controller { -+ compatible = "marvell,kirkwood-pcie"; -+ status = "disabled"; -+ device_type = "pci"; -+ -+ #address-cells = <3>; -+ #size-cells = <2>; -+ -+ bus-range = <0x00 0xff>; -+ -+ ranges = -+ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 -+ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ -+ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>; -+ -+ pcie@1,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; -+ reg = <0x0800 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 -+ 0x81000000 0 0 0x81000000 0x1 0 1 0>; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &intc 9>; -+ marvell,pcie-port = <0>; -+ marvell,pcie-lane = <0>; -+ clocks = <&gate_clk 2>; -+ status = "disabled"; -+ }; -+ }; -+ }; -+ - ocp@f1000000 { - pinctrl: pinctrl@10000 { - compatible = "marvell,88f6281-pinctrl"; ---- a/arch/arm/boot/dts/kirkwood-6282.dtsi -+++ b/arch/arm/boot/dts/kirkwood-6282.dtsi -@@ -1,4 +1,59 @@ - / { -+ mbus { -+ pcie-controller { -+ compatible = "marvell,kirkwood-pcie"; -+ status = "disabled"; -+ device_type = "pci"; -+ -+ #address-cells = <3>; -+ #size-cells = <2>; -+ -+ bus-range = <0x00 0xff>; -+ -+ ranges = -+ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 -+ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 -+ 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 -+ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ -+ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ -+ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1.0 MEM */ -+ 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1.0 IO */>; -+ -+ pcie@1,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; -+ reg = <0x0800 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 -+ 0x81000000 0 0 0x81000000 0x1 0 1 0>; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &intc 9>; -+ marvell,pcie-port = <0>; -+ marvell,pcie-lane = <0>; -+ clocks = <&gate_clk 2>; -+ status = "disabled"; -+ }; -+ -+ pcie@2,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>; -+ reg = <0x1000 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 -+ 0x81000000 0 0 0x81000000 0x2 0 1 0>; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &intc 10>; -+ marvell,pcie-port = <1>; -+ marvell,pcie-lane = <0>; -+ clocks = <&gate_clk 18>; -+ status = "disabled"; -+ }; -+ }; -+ }; - ocp@f1000000 { - - pinctrl: pinctrl@10000 { ---- a/arch/arm/boot/dts/kirkwood-iconnect.dts -+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts -@@ -18,6 +18,17 @@ - linux,initrd-end = <0x4800000>; - }; - -+ mbus { -+ ranges = ; -+ pcie-controller { -+ status = "okay"; -+ -+ pcie@1,0 { -+ status = "okay"; -+ }; -+ }; -+ }; -+ - ocp@f1000000 { - pinctrl: pinctrl@10000 { - ---- a/arch/arm/boot/dts/kirkwood-mplcec4.dts -+++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts -@@ -16,6 +16,17 @@ - bootargs = "console=ttyS0,115200n8 earlyprintk"; - }; - -+ mbus { -+ ranges = ; -+ pcie-controller { -+ status = "okay"; -+ -+ pcie@1,0 { -+ status = "okay"; -+ }; -+ }; -+ }; -+ - ocp@f1000000 { - pinctrl: pinctrl@10000 { - ---- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts -+++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts -@@ -16,6 +16,17 @@ - bootargs = "console=ttyS0,115200n8 earlyprintk"; - }; - -+ mbus { -+ ranges = ; -+ pcie-controller { -+ status = "okay"; -+ -+ pcie@1,0 { -+ status = "okay"; -+ }; -+ }; -+ }; -+ - ocp@f1000000 { - pinctrl: pinctrl@10000 { - ---- a/arch/arm/boot/dts/kirkwood-nsa310.dts -+++ b/arch/arm/boot/dts/kirkwood-nsa310.dts -@@ -16,6 +16,17 @@ - bootargs = "console=ttyS0,115200"; - }; - -+ mbus { -+ ranges = ; -+ pcie-controller { -+ status = "okay"; -+ -+ pcie@1,0 { -+ status = "okay"; -+ }; -+ }; -+ }; -+ - ocp@f1000000 { - pinctrl: pinctrl@10000 { - pinctrl-0 = <&pmx_unknown>; -@@ -162,14 +173,6 @@ - reg = <0x5040000 0x2fc0000>; - }; - }; -- -- pcie-controller { -- status = "okay"; -- -- pcie@1,0 { -- status = "okay"; -- }; -- }; - }; - - gpio_keys { ---- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts -+++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts -@@ -5,6 +5,17 @@ - #include "kirkwood-ts219.dtsi" - - / { -+ mbus { -+ ranges = ; -+ pcie-controller { -+ status = "okay"; -+ -+ pcie@2,0 { -+ status = "okay"; -+ }; -+ }; -+ }; -+ - ocp@f1000000 { - pinctrl: pinctrl@10000 { - -@@ -30,14 +41,6 @@ - marvell,function = "gpio"; - }; - }; -- pcie-controller { -- status = "okay"; -- -- pcie@2,0 { -- status = "okay"; -- }; -- }; -- - }; - - gpio_keys { ---- a/arch/arm/boot/dts/kirkwood-ts219.dtsi -+++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi -@@ -13,6 +13,16 @@ - bootargs = "console=ttyS0,115200n8"; - }; - -+ mbus { -+ pcie-controller { -+ status = "okay"; -+ -+ pcie@1,0 { -+ status = "okay"; -+ }; -+ }; -+ }; -+ - ocp@f1000000 { - i2c@11000 { - status = "okay"; ---- a/arch/arm/boot/dts/kirkwood.dtsi -+++ b/arch/arm/boot/dts/kirkwood.dtsi -@@ -20,7 +20,11 @@ - - mbus { - compatible = "marvell,kirkwood-mbus", "simple-bus"; -+ #address-cells = <2>; -+ #size-cells = <1>; - controller = <&mbusc>; -+ pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */ -+ pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */ - }; - - ocp@f1000000 { diff --git a/target/linux/mvebu/patches-3.10/0065-bus-mvebu-mbus-Add-devicetree-binding.patch b/target/linux/mvebu/patches-3.10/0065-bus-mvebu-mbus-Add-devicetree-binding.patch deleted file mode 100644 index 34e3969683..0000000000 --- a/target/linux/mvebu/patches-3.10/0065-bus-mvebu-mbus-Add-devicetree-binding.patch +++ /dev/null @@ -1,303 +0,0 @@ -From 442681ff6aca5e839fe41378ff919df1c340dc62 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Tue, 28 May 2013 07:58:31 -0300 -Subject: [PATCH 065/203] bus: mvebu-mbus: Add devicetree binding - -Introduce the devicetree binding for the mvebu MBus driver -avaiable in the mvebu SoCs (Armada 370/XP, Kirkwood, Dove, ...). - -This binding provides an accurate model of the SoC address space, -and allows to declare the address and size of the decoding windows the MBus -needs to access the peripherals, together with the target ID and attribute -for those windows. - -The binding is composed of two required nodes: one for the MBus bus -and one for the MBus controller. - -Signed-off-by: Ezequiel Garcia -Tested-by: Andrew Lunn -Tested-by: Sebastian Hesselbarth ---- - .../devicetree/bindings/bus/mvebu-mbus.txt | 276 +++++++++++++++++++++ - 1 file changed, 276 insertions(+) - create mode 100644 Documentation/devicetree/bindings/bus/mvebu-mbus.txt - ---- /dev/null -+++ b/Documentation/devicetree/bindings/bus/mvebu-mbus.txt -@@ -0,0 +1,276 @@ -+ -+* Marvell MBus -+ -+Required properties: -+ -+- compatible: Should be set to one of the following: -+ marvell,armada370-mbus -+ marvell,armadaxp-mbus -+ marvell,armada370-mbus -+ marvell,armadaxp-mbus -+ marvell,kirkwood-mbus -+ marvell,dove-mbus -+ marvell,orion5x-88f5281-mbus -+ marvell,orion5x-88f5182-mbus -+ marvell,orion5x-88f5181-mbus -+ marvell,orion5x-88f6183-mbus -+ marvell,mv78xx0-mbus -+ -+- address-cells: Must be '2'. The first cell for the MBus ID encoding, -+ the second cell for the address offset within the window. -+ -+- size-cells: Must be '1'. -+ -+- ranges: Must be set up to provide a proper translation for each child. -+ See the examples below. -+ -+- controller: Contains a single phandle referring to the MBus controller -+ node. This allows to specify the node that contains the -+ registers that control the MBus, which is typically contained -+ within the internal register window (see below). -+ -+Optional properties: -+ -+- pcie-mem-aperture: This optional property contains the aperture for -+ the memory region of the PCIe driver. -+ If it's defined, it must encode the base address and -+ size for the address decoding windows allocated for -+ the PCIe memory region. -+ -+- pcie-io-aperture: Just as explained for the above property, this -+ optional property contains the aperture for the -+ I/O region of the PCIe driver. -+ -+* Marvell MBus controller -+ -+Required properties: -+ -+- compatible: Should be set to "marvell,mbus-controller". -+ -+- reg: Device's register space. -+ Two entries are expected (see the examples below): -+ the first one controls the devices decoding window and -+ the second one controls the SDRAM decoding window. -+ -+Example: -+ -+ soc { -+ compatible = "marvell,armada370-mbus", "simple-bus"; -+ #address-cells = <2>; -+ #size-cells = <1>; -+ controller = <&mbusc>; -+ pcie-mem-aperture = <0xe0000000 0x8000000>; -+ pcie-io-aperture = <0xe8000000 0x100000>; -+ -+ internal-regs { -+ compatible = "simple-bus"; -+ -+ mbusc: mbus-controller@20000 { -+ compatible = "marvell,mbus-controller"; -+ reg = <0x20000 0x100>, <0x20180 0x20>; -+ }; -+ -+ /* more children ...*/ -+ }; -+ }; -+ -+** MBus address decoding window specification -+ -+The MBus children address space is comprised of two cells: the first one for -+the window ID and the second one for the offset within the window. -+In order to allow to describe valid and non-valid window entries, the -+following encoding is used: -+ -+ 0xSIAA0000 0x00oooooo -+ -+Where: -+ -+ S = 0x0 for a MBus valid window -+ S = 0xf for a non-valid window (see below) -+ -+If S = 0x0, then: -+ -+ I = 4-bit window target ID -+ AA = windpw attribute -+ -+If S = 0xf, then: -+ -+ I = don't care -+ AA = 1 for internal register -+ -+Following the above encoding, for each ranges entry for a MBus valid window -+(S = 0x0), an address decoding window is allocated. On the other side, -+entries for translation that do not correspond to valid windows (S = 0xf) -+are skipped. -+ -+ soc { -+ compatible = "marvell,armada370-mbus", "simple-bus"; -+ #address-cells = <2>; -+ #size-cells = <1>; -+ controller = <&mbusc>; -+ -+ ranges = <0xf0010000 0 0 0xd0000000 0x100000 -+ 0x01e00000 0 0 0xfff00000 0x100000>; -+ -+ bootrom { -+ compatible = "marvell,bootrom"; -+ reg = <0x01e00000 0 0x100000>; -+ }; -+ -+ /* other children */ -+ ... -+ -+ internal-regs { -+ compatible = "simple-bus"; -+ ranges = <0 0xf0010000 0 0x100000>; -+ -+ mbusc: mbus-controller@20000 { -+ compatible = "marvell,mbus-controller"; -+ reg = <0x20000 0x100>, <0x20180 0x20>; -+ }; -+ -+ /* more children ...*/ -+ }; -+ }; -+ -+In the shown example, the translation entry in the 'ranges' property is what -+makes the MBus driver create a static decoding window for the corresponding -+given child device. Note that the binding does not require child nodes to be -+present. Of course, child nodes are needed to probe the devices. -+ -+Since each window is identified by its target ID and attribute ID there's -+a special macro that can be use to simplify the translation entries: -+ -+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) -+ -+Using this macro, the above example would be: -+ -+ soc { -+ compatible = "marvell,armada370-mbus", "simple-bus"; -+ #address-cells = <2>; -+ #size-cells = <1>; -+ controller = <&mbusc>; -+ -+ ranges = < MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 -+ MBUS_ID(0x01, 0xe0) 0 0 0xfff00000 0x100000>; -+ -+ bootrom { -+ compatible = "marvell,bootrom"; -+ reg = ; -+ }; -+ -+ /* other children */ -+ ... -+ -+ internal-regs { -+ compatible = "simple-bus"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; -+ -+ mbusc: mbus-controller@20000 { -+ compatible = "marvell,mbus-controller"; -+ reg = <0x20000 0x100>, <0x20180 0x20>; -+ }; -+ -+ /* other children */ -+ ... -+ }; -+ }; -+ -+ -+** About the window base address -+ -+Remember the MBus controller allows a great deal of flexibility for choosing -+the decoding window base address. When planning the device tree layout it's -+possible to choose any address as the base address, provided of course there's -+a region large enough available, and with the required alignment. -+ -+Yet in other words: there's nothing preventing us from setting a base address -+of 0xf0000000, or 0xd0000000 for the NOR device shown above, if such region is -+unused. -+ -+** Window allocation policy -+ -+The mbus-node ranges property defines a set of mbus windows that are expected -+to be set by the operating system and that are guaranteed to be free of overlaps -+with one another or with the system memory ranges. -+ -+Each entry in the property refers to exactly one window. If the operating system -+choses to use a different set of mbus windows, it must ensure that any address -+translations performed from downstream devices are adapted accordingly. -+ -+The operating system may insert additional mbus windows that do not conflict -+with the ones listed in the ranges, e.g. for mapping PCIe devices. -+As a special case, the internal register window must be set up by the boot -+loader at the address listed in the ranges property, since access to that region -+is needed to set up the other windows. -+ -+** Example -+ -+See the example below, where a more complete device tree is shown: -+ -+ soc { -+ compatible = "marvell,armadaxp-mbus", "simple-bus"; -+ controller = <&mbusc>; -+ -+ ranges = ; -+ -+ bootrom { -+ compatible = "marvell,bootrom"; -+ reg = ; -+ }; -+ -+ devbus-bootcs { -+ status = "okay"; -+ ranges = <0 MBUS_ID(0x01, 0x2f) 0 0x8000000>; -+ -+ /* NOR */ -+ nor { -+ compatible = "cfi-flash"; -+ reg = <0 0x8000000>; -+ bank-width = <2>; -+ }; -+ }; -+ -+ pcie-controller { -+ compatible = "marvell,armada-xp-pcie"; -+ status = "okay"; -+ device_type = "pci"; -+ -+ #address-cells = <3>; -+ #size-cells = <2>; -+ -+ ranges = -+ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ -+ 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ -+ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ -+ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ -+ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ -+ 0x82000800 0 0xe0000000 MBUS_ID(0x04, 0xe8) 0xe0000000 0 0x08000000 /* Port 0.0 MEM */ -+ 0x81000800 0 0 MBUS_ID(0x04, 0xe0) 0xe8000000 0 0x00100000 /* Port 0.0 IO */>; -+ -+ -+ pcie@1,0 { -+ /* Port 0, Lane 0 */ -+ status = "okay"; -+ }; -+ }; -+ -+ internal-regs { -+ compatible = "simple-bus"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; -+ -+ mbusc: mbus-controller@20000 { -+ reg = <0x20000 0x100>, <0x20180 0x20>; -+ }; -+ -+ interrupt-controller@20000 { -+ reg = <0x20a00 0x2d0>, <0x21070 0x58>; -+ }; -+ }; -+ }; diff --git a/target/linux/mvebu/patches-3.10/0066-PCI-mvebu-Adapt-to-the-new-device-tree-layout.patch b/target/linux/mvebu/patches-3.10/0066-PCI-mvebu-Adapt-to-the-new-device-tree-layout.patch deleted file mode 100644 index c34ecb6124..0000000000 --- a/target/linux/mvebu/patches-3.10/0066-PCI-mvebu-Adapt-to-the-new-device-tree-layout.patch +++ /dev/null @@ -1,304 +0,0 @@ -From 60538f9841697cd4539d353afd8a7f51cd17e4af Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Fri, 5 Jul 2013 14:54:17 +0200 -Subject: [PATCH 066/203] PCI: mvebu: Adapt to the new device tree layout - -The new device tree layout encodes the window's target ID and attribute -in the PCIe controller node's ranges property. This allows to parse -such entries to obtain such information and use the recently introduced -MBus API to create the windows, instead of using the current name based -scheme. - -Acked-by: Bjorn Helgaas -Signed-off-by: Thomas Petazzoni -Tested-by: Andrew Lunn -Tested-by: Sebastian Hesselbarth ---- - .../devicetree/bindings/pci/mvebu-pci.txt | 145 ++++++++++++++++----- - 1 file changed, 109 insertions(+), 36 deletions(-) - ---- a/Documentation/devicetree/bindings/pci/mvebu-pci.txt -+++ b/Documentation/devicetree/bindings/pci/mvebu-pci.txt -@@ -1,6 +1,7 @@ - * Marvell EBU PCIe interfaces - - Mandatory properties: -+ - - compatible: one of the following values: - marvell,armada-370-pcie - marvell,armada-xp-pcie -@@ -9,11 +10,49 @@ Mandatory properties: - - #interrupt-cells, set to <1> - - bus-range: PCI bus numbers covered - - device_type, set to "pci" --- ranges: ranges for the PCI memory and I/O regions, as well as the -- MMIO registers to control the PCIe interfaces. -+- ranges: ranges describing the MMIO registers to control the PCIe -+ interfaces, and ranges describing the MBus windows needed to access -+ the memory and I/O regions of each PCIe interface. -+ -+The ranges describing the MMIO registers have the following layout: -+ -+ 0x82000000 0 r MBUS_ID(0xf0, 0x01) r 0 s -+ -+where: -+ -+ * r is a 32-bits value that gives the offset of the MMIO -+ registers of this PCIe interface, from the base of the internal -+ registers. -+ -+ * s is a 32-bits value that give the size of this MMIO -+ registers area. This range entry translates the '0x82000000 0 r' PCI -+ address into the 'MBUS_ID(0xf0, 0x01) r' CPU address, which is part -+ of the internal register window (as identified by MBUS_ID(0xf0, -+ 0x01)). -+ -+The ranges describing the MBus windows have the following layout: -+ -+ 0x8t000000 s 0 MBUS_ID(w, a) 0 1 0 -+ -+where: - --In addition, the Device Tree node must have sub-nodes describing each -+ * t is the type of the MBus window (as defined by the standard PCI DT -+ bindings), 1 for I/O and 2 for memory. -+ -+ * s is the PCI slot that corresponds to this PCIe interface -+ -+ * w is the 'target ID' value for the MBus window -+ -+ * a the 'attribute' value for the MBus window. -+ -+Since the location and size of the different MBus windows is not fixed in -+hardware, and only determined in runtime, those ranges cover the full first -+4 GB of the physical address space, and do not translate into a valid CPU -+address. -+ -+In addition, the device tree node must have sub-nodes describing each - PCIe interface, having the following mandatory properties: -+ - - reg: used only for interrupt mapping, so only the first four bytes - are used to refer to the correct bus number and device number. - - assigned-addresses: reference to the MMIO registers used to control -@@ -25,7 +64,8 @@ PCIe interface, having the following man - - #address-cells, set to <3> - - #size-cells, set to <2> - - #interrupt-cells, set to <1> --- ranges, empty property. -+- ranges, translating the MBus windows ranges of the parent node into -+ standard PCI addresses. - - interrupt-map-mask and interrupt-map, standard PCI properties to - define the mapping of the PCIe interface to interrupt numbers. - -@@ -46,27 +86,50 @@ pcie-controller { - - bus-range = <0x00 0xff>; - -- ranges = <0x82000000 0 0xd0040000 0xd0040000 0 0x00002000 /* Port 0.0 registers */ -- 0x82000000 0 0xd0042000 0xd0042000 0 0x00002000 /* Port 2.0 registers */ -- 0x82000000 0 0xd0044000 0xd0044000 0 0x00002000 /* Port 0.1 registers */ -- 0x82000000 0 0xd0048000 0xd0048000 0 0x00002000 /* Port 0.2 registers */ -- 0x82000000 0 0xd004c000 0xd004c000 0 0x00002000 /* Port 0.3 registers */ -- 0x82000000 0 0xd0080000 0xd0080000 0 0x00002000 /* Port 1.0 registers */ -- 0x82000000 0 0xd0082000 0xd0082000 0 0x00002000 /* Port 3.0 registers */ -- 0x82000000 0 0xd0084000 0xd0084000 0 0x00002000 /* Port 1.1 registers */ -- 0x82000000 0 0xd0088000 0xd0088000 0 0x00002000 /* Port 1.2 registers */ -- 0x82000000 0 0xd008c000 0xd008c000 0 0x00002000 /* Port 1.3 registers */ -- 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ -- 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ -+ ranges = -+ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ -+ 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ -+ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ -+ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ -+ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ -+ 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ -+ 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */ -+ 0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */ -+ 0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */ -+ 0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */ -+ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ -+ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ -+ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ -+ 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */ -+ 0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */ -+ 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ -+ 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ -+ 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ -+ -+ 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ -+ 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ -+ 0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */ -+ 0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */ -+ 0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */ -+ 0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */ -+ 0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */ -+ 0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */ -+ -+ 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ -+ 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */ -+ -+ 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */ -+ 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>; - - pcie@1,0 { - device_type = "pci"; -- assigned-addresses = <0x82000800 0 0xd0040000 0 0x2000>; -+ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; -- ranges; -+ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 -+ 0x81000000 0 0 0x81000000 0x1 0 1 0>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 58>; - marvell,pcie-port = <0>; -@@ -77,12 +140,13 @@ pcie-controller { - - pcie@2,0 { - device_type = "pci"; -- assigned-addresses = <0x82001000 0 0xd0044000 0 0x2000>; -+ assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; - reg = <0x1000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; -- ranges; -+ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 -+ 0x81000000 0 0 0x81000000 0x2 0 1 0>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 59>; - marvell,pcie-port = <0>; -@@ -93,12 +157,13 @@ pcie-controller { - - pcie@3,0 { - device_type = "pci"; -- assigned-addresses = <0x82001800 0 0xd0048000 0 0x2000>; -+ assigned-addresses = <0x82001800 0 0x48000 0 0x2000>; - reg = <0x1800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; -- ranges; -+ ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 -+ 0x81000000 0 0 0x81000000 0x3 0 1 0>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 60>; - marvell,pcie-port = <0>; -@@ -109,12 +174,13 @@ pcie-controller { - - pcie@4,0 { - device_type = "pci"; -- assigned-addresses = <0x82002000 0 0xd004c000 0 0x2000>; -+ assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>; - reg = <0x2000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; -- ranges; -+ ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 -+ 0x81000000 0 0 0x81000000 0x4 0 1 0>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 61>; - marvell,pcie-port = <0>; -@@ -125,12 +191,13 @@ pcie-controller { - - pcie@5,0 { - device_type = "pci"; -- assigned-addresses = <0x82002800 0 0xd0080000 0 0x2000>; -+ assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; - reg = <0x2800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; -- ranges; -+ ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 -+ 0x81000000 0 0 0x81000000 0x5 0 1 0>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 62>; - marvell,pcie-port = <1>; -@@ -141,12 +208,13 @@ pcie-controller { - - pcie@6,0 { - device_type = "pci"; -- assigned-addresses = <0x82003000 0 0xd0084000 0 0x2000>; -+ assigned-addresses = <0x82003000 0 0x84000 0 0x2000>; - reg = <0x3000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; -- ranges; -+ ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0 -+ 0x81000000 0 0 0x81000000 0x6 0 1 0>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 63>; - marvell,pcie-port = <1>; -@@ -157,12 +225,13 @@ pcie-controller { - - pcie@7,0 { - device_type = "pci"; -- assigned-addresses = <0x82003800 0 0xd0088000 0 0x2000>; -+ assigned-addresses = <0x82003800 0 0x88000 0 0x2000>; - reg = <0x3800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; -- ranges; -+ ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0 -+ 0x81000000 0 0 0x81000000 0x7 0 1 0>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 64>; - marvell,pcie-port = <1>; -@@ -173,12 +242,13 @@ pcie-controller { - - pcie@8,0 { - device_type = "pci"; -- assigned-addresses = <0x82004000 0 0xd008c000 0 0x2000>; -+ assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>; - reg = <0x4000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; -- ranges; -+ ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0 -+ 0x81000000 0 0 0x81000000 0x8 0 1 0>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 65>; - marvell,pcie-port = <1>; -@@ -186,14 +256,16 @@ pcie-controller { - clocks = <&gateclk 12>; - status = "disabled"; - }; -+ - pcie@9,0 { - device_type = "pci"; -- assigned-addresses = <0x82004800 0 0xd0042000 0 0x2000>; -+ assigned-addresses = <0x82004800 0 0x42000 0 0x2000>; - reg = <0x4800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; -- ranges; -+ ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 -+ 0x81000000 0 0 0x81000000 0x9 0 1 0>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 99>; - marvell,pcie-port = <2>; -@@ -204,12 +276,13 @@ pcie-controller { - - pcie@10,0 { - device_type = "pci"; -- assigned-addresses = <0x82005000 0 0xd0082000 0 0x2000>; -+ assigned-addresses = <0x82005000 0 0x82000 0 0x2000>; - reg = <0x5000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; -- ranges; -+ ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0 -+ 0x81000000 0 0 0x81000000 0xa 0 1 0>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 103>; - marvell,pcie-port = <3>; diff --git a/target/linux/mvebu/patches-3.10/0067-ARM-mvebu-set-aliases-for-ethernet-controllers.patch b/target/linux/mvebu/patches-3.10/0067-ARM-mvebu-set-aliases-for-ethernet-controllers.patch deleted file mode 100644 index 53d79cc5f8..0000000000 --- a/target/linux/mvebu/patches-3.10/0067-ARM-mvebu-set-aliases-for-ethernet-controllers.patch +++ /dev/null @@ -1,90 +0,0 @@ -From cc4fb487fbf95c97b40e1e8e5b8b2ddabc8d124d Mon Sep 17 00:00:00 2001 -From: Willy Tarreau -Date: Mon, 3 Jun 2013 18:47:36 +0200 -Subject: [PATCH 067/203] ARM: mvebu: set aliases for ethernet controllers - -These aliases are used when feeding the DT from ATAGS to set the -devices MAC addresses. - -Signed-off-by: Willy Tarreau -Signed-off-by: Thomas Petazzoni -Signed-off-by: Jason Cooper ---- - arch/arm/boot/dts/armada-370-xp.dtsi | 9 +++++++-- - arch/arm/boot/dts/armada-xp-mv78460.dtsi | 3 ++- - arch/arm/boot/dts/armada-xp.dtsi | 6 +++++- - 3 files changed, 14 insertions(+), 4 deletions(-) - ---- a/arch/arm/boot/dts/armada-370-xp.dtsi -+++ b/arch/arm/boot/dts/armada-370-xp.dtsi -@@ -24,6 +24,11 @@ - model = "Marvell Armada 370 and XP SoC"; - compatible = "marvell,armada-370-xp"; - -+ aliases { -+ eth0 = ð0; -+ eth1 = ð1; -+ }; -+ - cpus { - cpu@0 { - compatible = "marvell,sheeva-v7"; -@@ -151,7 +156,7 @@ - reg = <0x72004 0x4>; - }; - -- ethernet@70000 { -+ eth0: ethernet@70000 { - compatible = "marvell,armada-370-neta"; - reg = <0x70000 0x4000>; - interrupts = <8>; -@@ -159,7 +164,7 @@ - status = "disabled"; - }; - -- ethernet@74000 { -+ eth1: ethernet@74000 { - compatible = "marvell,armada-370-neta"; - reg = <0x74000 0x4000>; - interrupts = <10>; ---- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi -+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi -@@ -23,6 +23,7 @@ - gpio0 = &gpio0; - gpio1 = &gpio1; - gpio2 = &gpio2; -+ eth3 = ð3; - }; - - -@@ -326,7 +327,7 @@ - interrupts = <91>; - }; - -- ethernet@34000 { -+ eth3: ethernet@34000 { - compatible = "marvell,armada-370-neta"; - reg = <0x34000 0x4000>; - interrupts = <14>; ---- a/arch/arm/boot/dts/armada-xp.dtsi -+++ b/arch/arm/boot/dts/armada-xp.dtsi -@@ -22,6 +22,10 @@ - model = "Marvell Armada XP family SoC"; - compatible = "marvell,armadaxp", "marvell,armada-370-xp"; - -+ aliases { -+ eth2 = ð2; -+ }; -+ - soc { - compatible = "marvell,armadaxp-mbus", "simple-bus"; - -@@ -93,7 +97,7 @@ - reg = <0x18200 0x500>; - }; - -- ethernet@30000 { -+ eth2: ethernet@30000 { - compatible = "marvell,armada-370-neta"; - reg = <0x30000 0x4000>; - interrupts = <12>; diff --git a/target/linux/mvebu/patches-3.10/0068-ARM-mvebu-use-correct-interrupt-cells-instead-of-int.patch b/target/linux/mvebu/patches-3.10/0068-ARM-mvebu-use-correct-interrupt-cells-instead-of-int.patch deleted file mode 100644 index efd444159e..0000000000 --- a/target/linux/mvebu/patches-3.10/0068-ARM-mvebu-use-correct-interrupt-cells-instead-of-int.patch +++ /dev/null @@ -1,127 +0,0 @@ -From d967b31469239f610ea84b0a54ce296c15d860e9 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Tue, 30 Jul 2013 16:59:02 +0200 -Subject: [PATCH 068/203] ARM: mvebu: use correct #interrupt-cells instead of - #interrupts-cells - -The Device Tree information for the GPIO banks of the Armada 370 and -Armada XP SOCs was incorrectly using #interrupts-cells instead of -controller when using GPIO interrupts, since the GPIO bank DT node -wasn't recognized as a valid interrupt controller by the OF code. - -Signed-off-by: Thomas Petazzoni -Signed-off-by: Jason Cooper ---- - arch/arm/boot/dts/armada-370.dtsi | 6 +++--- - arch/arm/boot/dts/armada-xp-mv78230.dtsi | 4 ++-- - arch/arm/boot/dts/armada-xp-mv78260.dtsi | 6 +++--- - arch/arm/boot/dts/armada-xp-mv78460.dtsi | 6 +++--- - 4 files changed, 11 insertions(+), 11 deletions(-) - ---- a/arch/arm/boot/dts/armada-370.dtsi -+++ b/arch/arm/boot/dts/armada-370.dtsi -@@ -136,7 +136,7 @@ - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; -- #interrupts-cells = <2>; -+ #interrupt-cells = <2>; - interrupts = <82>, <83>, <84>, <85>; - }; - -@@ -147,7 +147,7 @@ - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; -- #interrupts-cells = <2>; -+ #interrupt-cells = <2>; - interrupts = <87>, <88>, <89>, <90>; - }; - -@@ -158,7 +158,7 @@ - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; -- #interrupts-cells = <2>; -+ #interrupt-cells = <2>; - interrupts = <91>; - }; - ---- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi -+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi -@@ -181,7 +181,7 @@ - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; -- #interrupts-cells = <2>; -+ #interrupt-cells = <2>; - interrupts = <82>, <83>, <84>, <85>; - }; - -@@ -192,7 +192,7 @@ - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; -- #interrupts-cells = <2>; -+ #interrupt-cells = <2>; - interrupts = <87>, <88>, <89>; - }; - ---- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi -+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi -@@ -203,7 +203,7 @@ - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; -- #interrupts-cells = <2>; -+ #interrupt-cells = <2>; - interrupts = <82>, <83>, <84>, <85>; - }; - -@@ -214,7 +214,7 @@ - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; -- #interrupts-cells = <2>; -+ #interrupt-cells = <2>; - interrupts = <87>, <88>, <89>, <90>; - }; - -@@ -225,7 +225,7 @@ - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; -- #interrupts-cells = <2>; -+ #interrupt-cells = <2>; - interrupts = <91>; - }; - ---- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi -+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi -@@ -301,7 +301,7 @@ - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; -- #interrupts-cells = <2>; -+ #interrupt-cells = <2>; - interrupts = <82>, <83>, <84>, <85>; - }; - -@@ -312,7 +312,7 @@ - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; -- #interrupts-cells = <2>; -+ #interrupt-cells = <2>; - interrupts = <87>, <88>, <89>, <90>; - }; - -@@ -323,7 +323,7 @@ - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; -- #interrupts-cells = <2>; -+ #interrupt-cells = <2>; - interrupts = <91>; - }; - diff --git a/target/linux/mvebu/patches-3.10/0069-ARM-mvebu-use-dts-pre-processor-for-mv78230.patch b/target/linux/mvebu/patches-3.10/0069-ARM-mvebu-use-dts-pre-processor-for-mv78230.patch deleted file mode 100644 index 4961b714e5..0000000000 --- a/target/linux/mvebu/patches-3.10/0069-ARM-mvebu-use-dts-pre-processor-for-mv78230.patch +++ /dev/null @@ -1,21 +0,0 @@ -From 3953e4230483d6ce51b9f7e3b20db30e5ca6f4da Mon Sep 17 00:00:00 2001 -From: Jason Cooper -Date: Wed, 7 Aug 2013 20:04:21 +0000 -Subject: [PATCH 069/203] ARM: mvebu: use dts pre-processor for mv78230 - -Signed-off-by: Jason Cooper ---- - arch/arm/boot/dts/armada-xp-mv78230.dtsi | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi -+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi -@@ -13,7 +13,7 @@ - * common to all Armada XP SoCs. - */ - --/include/ "armada-xp.dtsi" -+#include "armada-xp.dtsi" - - / { - model = "Marvell Armada XP MV78230 SoC"; diff --git a/target/linux/mvebu/patches-3.10/0070-PCI-use-weak-functions-for-MSI-arch-specific-functio.patch b/target/linux/mvebu/patches-3.10/0070-PCI-use-weak-functions-for-MSI-arch-specific-functio.patch deleted file mode 100644 index 364898c5e8..0000000000 --- a/target/linux/mvebu/patches-3.10/0070-PCI-use-weak-functions-for-MSI-arch-specific-functio.patch +++ /dev/null @@ -1,291 +0,0 @@ -From 4fb403ed86e78027a5b85333fa1491d5a0e68ae9 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Wed, 19 Jun 2013 09:42:32 +0200 -Subject: [PATCH 070/203] PCI: use weak functions for MSI arch-specific - functions - -Until now, the MSI architecture-specific functions could be overloaded -using a fairly complex set of #define and compile-time -conditionals. In order to prepare for the introduction of the msi_chip -infrastructure, it is desirable to switch all those functions to use -the 'weak' mechanism. This commit converts all the architectures that -were overidding those MSI functions to use the new strategy. - -Note that we keep two separate, non-weak, functions -default_teardown_msi_irqs() and default_restore_msi_irqs() for the -default behavior of the arch_teardown_msi_irqs() and -arch_restore_msi_irqs(), as the default behavior is needed by x86 PCI -code. - -Signed-off-by: Thomas Petazzoni -Acked-by: Bjorn Helgaas -Acked-by: Benjamin Herrenschmidt -Tested-by: Daniel Price -Tested-by: Thierry Reding -Cc: Benjamin Herrenschmidt -Cc: Paul Mackerras -Cc: linuxppc-dev@lists.ozlabs.org -Cc: Martin Schwidefsky -Cc: Heiko Carstens -Cc: linux390@de.ibm.com -Cc: linux-s390@vger.kernel.org -Cc: Thomas Gleixner -Cc: Ingo Molnar -Cc: H. Peter Anvin -Cc: x86@kernel.org -Cc: Russell King -Cc: Tony Luck -Cc: Fenghua Yu -Cc: linux-ia64@vger.kernel.org -Cc: Ralf Baechle -Cc: linux-mips@linux-mips.org -Cc: David S. Miller -Cc: sparclinux@vger.kernel.org -Cc: Chris Metcalf ---- - arch/mips/include/asm/pci.h | 5 ----- - arch/powerpc/include/asm/pci.h | 5 ----- - arch/s390/include/asm/pci.h | 4 ---- - arch/x86/include/asm/pci.h | 30 -------------------------- - arch/x86/kernel/x86_init.c | 24 +++++++++++++++++++++ - drivers/pci/msi.c | 48 +++++++++++++++++++++--------------------- - include/linux/msi.h | 8 ++++++- - 7 files changed, 55 insertions(+), 69 deletions(-) - ---- a/arch/mips/include/asm/pci.h -+++ b/arch/mips/include/asm/pci.h -@@ -137,11 +137,6 @@ static inline int pci_get_legacy_ide_irq - return channel ? 15 : 14; - } - --#ifdef CONFIG_CPU_CAVIUM_OCTEON --/* MSI arch hook for OCTEON */ --#define arch_setup_msi_irqs arch_setup_msi_irqs --#endif -- - extern char * (*pcibios_plat_setup)(char *str); - - #ifdef CONFIG_OF ---- a/arch/powerpc/include/asm/pci.h -+++ b/arch/powerpc/include/asm/pci.h -@@ -113,11 +113,6 @@ extern int pci_domain_nr(struct pci_bus - /* Decide whether to display the domain number in /proc */ - extern int pci_proc_domain(struct pci_bus *bus); - --/* MSI arch hooks */ --#define arch_setup_msi_irqs arch_setup_msi_irqs --#define arch_teardown_msi_irqs arch_teardown_msi_irqs --#define arch_msi_check_device arch_msi_check_device -- - struct vm_area_struct; - /* Map a range of PCI memory or I/O space for a device into user space */ - int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma, ---- a/arch/s390/include/asm/pci.h -+++ b/arch/s390/include/asm/pci.h -@@ -21,10 +21,6 @@ void pci_iounmap(struct pci_dev *, void - int pci_domain_nr(struct pci_bus *); - int pci_proc_domain(struct pci_bus *); - --/* MSI arch hooks */ --#define arch_setup_msi_irqs arch_setup_msi_irqs --#define arch_teardown_msi_irqs arch_teardown_msi_irqs -- - #define ZPCI_BUS_NR 0 /* default bus number */ - #define ZPCI_DEVFN 0 /* default device number */ - ---- a/arch/x86/include/asm/pci.h -+++ b/arch/x86/include/asm/pci.h -@@ -100,29 +100,6 @@ static inline void early_quirks(void) { - extern void pci_iommu_alloc(void); - - #ifdef CONFIG_PCI_MSI --/* MSI arch specific hooks */ --static inline int x86_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) --{ -- return x86_msi.setup_msi_irqs(dev, nvec, type); --} -- --static inline void x86_teardown_msi_irqs(struct pci_dev *dev) --{ -- x86_msi.teardown_msi_irqs(dev); --} -- --static inline void x86_teardown_msi_irq(unsigned int irq) --{ -- x86_msi.teardown_msi_irq(irq); --} --static inline void x86_restore_msi_irqs(struct pci_dev *dev, int irq) --{ -- x86_msi.restore_msi_irqs(dev, irq); --} --#define arch_setup_msi_irqs x86_setup_msi_irqs --#define arch_teardown_msi_irqs x86_teardown_msi_irqs --#define arch_teardown_msi_irq x86_teardown_msi_irq --#define arch_restore_msi_irqs x86_restore_msi_irqs - /* implemented in arch/x86/kernel/apic/io_apic. */ - struct msi_desc; - int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type); -@@ -130,16 +107,9 @@ void native_teardown_msi_irq(unsigned in - void native_restore_msi_irqs(struct pci_dev *dev, int irq); - int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc, - unsigned int irq_base, unsigned int irq_offset); --/* default to the implementation in drivers/lib/msi.c */ --#define HAVE_DEFAULT_MSI_TEARDOWN_IRQS --#define HAVE_DEFAULT_MSI_RESTORE_IRQS --void default_teardown_msi_irqs(struct pci_dev *dev); --void default_restore_msi_irqs(struct pci_dev *dev, int irq); - #else - #define native_setup_msi_irqs NULL - #define native_teardown_msi_irq NULL --#define default_teardown_msi_irqs NULL --#define default_restore_msi_irqs NULL - #endif - - #define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys) ---- a/arch/x86/kernel/x86_init.c -+++ b/arch/x86/kernel/x86_init.c -@@ -107,6 +107,8 @@ struct x86_platform_ops x86_platform = { - }; - - EXPORT_SYMBOL_GPL(x86_platform); -+ -+#if defined(CONFIG_PCI_MSI) - struct x86_msi_ops x86_msi = { - .setup_msi_irqs = native_setup_msi_irqs, - .compose_msi_msg = native_compose_msi_msg, -@@ -116,6 +118,28 @@ struct x86_msi_ops x86_msi = { - .setup_hpet_msi = default_setup_hpet_msi, - }; - -+/* MSI arch specific hooks */ -+int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) -+{ -+ return x86_msi.setup_msi_irqs(dev, nvec, type); -+} -+ -+void arch_teardown_msi_irqs(struct pci_dev *dev) -+{ -+ x86_msi.teardown_msi_irqs(dev); -+} -+ -+void arch_teardown_msi_irq(unsigned int irq) -+{ -+ x86_msi.teardown_msi_irq(irq); -+} -+ -+void arch_restore_msi_irqs(struct pci_dev *dev, int irq) -+{ -+ x86_msi.restore_msi_irqs(dev, irq); -+} -+#endif -+ - struct x86_io_apic_ops x86_io_apic_ops = { - .init = native_io_apic_init_mappings, - .read = native_io_apic_read, ---- a/drivers/pci/msi.c -+++ b/drivers/pci/msi.c -@@ -30,20 +30,21 @@ static int pci_msi_enable = 1; - - /* Arch hooks */ - --#ifndef arch_msi_check_device --int arch_msi_check_device(struct pci_dev *dev, int nvec, int type) -+int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc) -+{ -+ return -EINVAL; -+} -+ -+void __weak arch_teardown_msi_irq(unsigned int irq) - { -- return 0; - } --#endif - --#ifndef arch_setup_msi_irqs --# define arch_setup_msi_irqs default_setup_msi_irqs --# define HAVE_DEFAULT_MSI_SETUP_IRQS --#endif -+int __weak arch_msi_check_device(struct pci_dev *dev, int nvec, int type) -+{ -+ return 0; -+} - --#ifdef HAVE_DEFAULT_MSI_SETUP_IRQS --int default_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) -+int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) - { - struct msi_desc *entry; - int ret; -@@ -65,14 +66,11 @@ int default_setup_msi_irqs(struct pci_de - - return 0; - } --#endif - --#ifndef arch_teardown_msi_irqs --# define arch_teardown_msi_irqs default_teardown_msi_irqs --# define HAVE_DEFAULT_MSI_TEARDOWN_IRQS --#endif -- --#ifdef HAVE_DEFAULT_MSI_TEARDOWN_IRQS -+/* -+ * We have a default implementation available as a separate non-weak -+ * function, as it is used by the Xen x86 PCI code -+ */ - void default_teardown_msi_irqs(struct pci_dev *dev) - { - struct msi_desc *entry; -@@ -86,14 +84,12 @@ void default_teardown_msi_irqs(struct pc - arch_teardown_msi_irq(entry->irq + i); - } - } --#endif - --#ifndef arch_restore_msi_irqs --# define arch_restore_msi_irqs default_restore_msi_irqs --# define HAVE_DEFAULT_MSI_RESTORE_IRQS --#endif -+void __weak arch_teardown_msi_irqs(struct pci_dev *dev) -+{ -+ return default_teardown_msi_irqs(dev); -+} - --#ifdef HAVE_DEFAULT_MSI_RESTORE_IRQS - void default_restore_msi_irqs(struct pci_dev *dev, int irq) - { - struct msi_desc *entry; -@@ -111,7 +107,11 @@ void default_restore_msi_irqs(struct pci - if (entry) - write_msi_msg(irq, &entry->msg); - } --#endif -+ -+void __weak arch_restore_msi_irqs(struct pci_dev *dev, int irq) -+{ -+ return default_restore_msi_irqs(dev, irq); -+} - - static void msi_set_enable(struct pci_dev *dev, int enable) - { ---- a/include/linux/msi.h -+++ b/include/linux/msi.h -@@ -50,12 +50,18 @@ struct msi_desc { - }; - - /* -- * The arch hook for setup up msi irqs -+ * The arch hooks to setup up msi irqs. Those functions are -+ * implemented as weak symbols so that they /can/ be overriden by -+ * architecture specific code if needed. - */ - int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc); - void arch_teardown_msi_irq(unsigned int irq); - int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type); - void arch_teardown_msi_irqs(struct pci_dev *dev); - int arch_msi_check_device(struct pci_dev* dev, int nvec, int type); -+void arch_restore_msi_irqs(struct pci_dev *dev, int irq); -+ -+void default_teardown_msi_irqs(struct pci_dev *dev); -+void default_restore_msi_irqs(struct pci_dev *dev, int irq); - - #endif /* LINUX_MSI_H */ diff --git a/target/linux/mvebu/patches-3.10/0071-PCI-remove-ARCH_SUPPORTS_MSI-kconfig-option.patch b/target/linux/mvebu/patches-3.10/0071-PCI-remove-ARCH_SUPPORTS_MSI-kconfig-option.patch deleted file mode 100644 index 7655127ee8..0000000000 --- a/target/linux/mvebu/patches-3.10/0071-PCI-remove-ARCH_SUPPORTS_MSI-kconfig-option.patch +++ /dev/null @@ -1,152 +0,0 @@ -From c819a1b0907257d73de96af33d557668a5c0c895 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Mon, 1 Jul 2013 14:26:57 +0200 -Subject: [PATCH 071/203] PCI: remove ARCH_SUPPORTS_MSI kconfig option - -Now that we have weak versions for each of the PCI MSI architecture -functions, we can actually build the MSI support for all platforms, -regardless of whether they provide or not architecture-specific -versions of those functions. For this reason, the ARCH_SUPPORTS_MSI -hidden kconfig boolean becomes useless, and this patch gets rid of it. - -Signed-off-by: Thomas Petazzoni -Acked-by: Bjorn Helgaas -Acked-by: Benjamin Herrenschmidt -Tested-by: Daniel Price -Tested-by: Thierry Reding -Cc: Benjamin Herrenschmidt -Cc: Paul Mackerras -Cc: linuxppc-dev@lists.ozlabs.org -Cc: Martin Schwidefsky -Cc: Heiko Carstens -Cc: linux390@de.ibm.com -Cc: linux-s390@vger.kernel.org -Cc: Thomas Gleixner -Cc: Ingo Molnar -Cc: H. Peter Anvin -Cc: x86@kernel.org -Cc: Russell King -Cc: Tony Luck -Cc: Fenghua Yu -Cc: linux-ia64@vger.kernel.org -Cc: Ralf Baechle -Cc: linux-mips@linux-mips.org -Cc: David S. Miller -Cc: sparclinux@vger.kernel.org -Cc: Chris Metcalf ---- - arch/arm/Kconfig | 1 - - arch/ia64/Kconfig | 1 - - arch/mips/Kconfig | 2 -- - arch/powerpc/Kconfig | 1 - - arch/s390/Kconfig | 1 - - arch/sparc/Kconfig | 1 - - arch/tile/Kconfig | 1 - - arch/x86/Kconfig | 1 - - drivers/pci/Kconfig | 4 ---- - 9 files changed, 13 deletions(-) - ---- a/arch/arm/Kconfig -+++ b/arch/arm/Kconfig -@@ -435,7 +435,6 @@ config ARCH_NETX - config ARCH_IOP13XX - bool "IOP13xx-based" - depends on MMU -- select ARCH_SUPPORTS_MSI - select CPU_XSC3 - select NEED_MACH_MEMORY_H - select NEED_RET_TO_USER ---- a/arch/ia64/Kconfig -+++ b/arch/ia64/Kconfig -@@ -9,7 +9,6 @@ config IA64 - select PCI if (!IA64_HP_SIM) - select ACPI if (!IA64_HP_SIM) - select PM if (!IA64_HP_SIM) -- select ARCH_SUPPORTS_MSI - select HAVE_UNSTABLE_SCHED_CLOCK - select HAVE_IDE - select HAVE_OPROFILE ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -764,7 +764,6 @@ config CAVIUM_OCTEON_REFERENCE_BOARD - select SYS_HAS_CPU_CAVIUM_OCTEON - select SWAP_IO_SPACE - select HW_HAS_PCI -- select ARCH_SUPPORTS_MSI - select ZONE_DMA32 - select USB_ARCH_HAS_OHCI - select USB_ARCH_HAS_EHCI -@@ -800,7 +799,6 @@ config NLM_XLR_BOARD - select CEVT_R4K - select CSRC_R4K - select IRQ_CPU -- select ARCH_SUPPORTS_MSI - select ZONE_DMA32 if 64BIT - select SYNC_R4K - select SYS_HAS_EARLY_PRINTK ---- a/arch/powerpc/Kconfig -+++ b/arch/powerpc/Kconfig -@@ -734,7 +734,6 @@ config PCI - default y if !40x && !CPM2 && !8xx && !PPC_83xx \ - && !PPC_85xx && !PPC_86xx && !GAMECUBE_COMMON - default PCI_QSPAN if !4xx && !CPM2 && 8xx -- select ARCH_SUPPORTS_MSI - select GENERIC_PCI_IOMAP - help - Find out whether your system includes a PCI bus. PCI is the name of ---- a/arch/s390/Kconfig -+++ b/arch/s390/Kconfig -@@ -430,7 +430,6 @@ menuconfig PCI - bool "PCI support" - default n - depends on 64BIT -- select ARCH_SUPPORTS_MSI - select PCI_MSI - help - Enable PCI support. ---- a/arch/sparc/Kconfig -+++ b/arch/sparc/Kconfig -@@ -52,7 +52,6 @@ config SPARC32 - - config SPARC64 - def_bool 64BIT -- select ARCH_SUPPORTS_MSI - select HAVE_FUNCTION_TRACER - select HAVE_FUNCTION_GRAPH_TRACER - select HAVE_FUNCTION_GRAPH_FP_TEST ---- a/arch/tile/Kconfig -+++ b/arch/tile/Kconfig -@@ -379,7 +379,6 @@ config PCI - select PCI_DOMAINS - select GENERIC_PCI_IOMAP - select TILE_GXIO_TRIO if TILEGX -- select ARCH_SUPPORTS_MSI if TILEGX - select PCI_MSI if TILEGX - ---help--- - Enable PCI root complex support, so PCIe endpoint devices can ---- a/arch/x86/Kconfig -+++ b/arch/x86/Kconfig -@@ -1999,7 +1999,6 @@ menu "Bus options (PCI etc.)" - config PCI - bool "PCI support" - default y -- select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC) - ---help--- - Find out whether you have a PCI motherboard. PCI is the name of a - bus system, i.e. the way the CPU talks to the other stuff inside ---- a/drivers/pci/Kconfig -+++ b/drivers/pci/Kconfig -@@ -1,13 +1,9 @@ - # - # PCI configuration - # --config ARCH_SUPPORTS_MSI -- bool -- - config PCI_MSI - bool "Message Signaled Interrupts (MSI and MSI-X)" - depends on PCI -- depends on ARCH_SUPPORTS_MSI - help - This allows device drivers to enable MSI (Message Signaled - Interrupts). Message Signaled Interrupts enable a device to diff --git a/target/linux/mvebu/patches-3.10/0072-PCI-Introduce-new-MSI-chip-infrastructure.patch b/target/linux/mvebu/patches-3.10/0072-PCI-Introduce-new-MSI-chip-infrastructure.patch deleted file mode 100644 index 291a3b37c9..0000000000 --- a/target/linux/mvebu/patches-3.10/0072-PCI-Introduce-new-MSI-chip-infrastructure.patch +++ /dev/null @@ -1,108 +0,0 @@ -From 9c6ddccbbfaf789beccc6a1d87abe9bc60dc570f Mon Sep 17 00:00:00 2001 -From: Thierry Reding -Date: Thu, 6 Jun 2013 18:20:29 +0200 -Subject: [PATCH 072/203] PCI: Introduce new MSI chip infrastructure - -The new struct msi_chip is used to associated an MSI controller with a -PCI bus. It is automatically handed down from the root to its children -during bus enumeration. - -This patch provides default (weak) implementations for the architecture- -specific MSI functions (arch_setup_msi_irq(), arch_teardown_msi_irq() -and arch_msi_check_device()) which check if a PCI device's bus has an -attached MSI chip and forward the call appropriately. - -Signed-off-by: Thierry Reding -Signed-off-by: Thomas Petazzoni -Acked-by: Bjorn Helgaas -Tested-by: Daniel Price -Tested-by: Thierry Reding ---- - drivers/pci/msi.c | 27 +++++++++++++++++++++++++-- - drivers/pci/probe.c | 1 + - include/linux/msi.h | 11 +++++++++++ - include/linux/pci.h | 1 + - 4 files changed, 38 insertions(+), 2 deletions(-) - ---- a/drivers/pci/msi.c -+++ b/drivers/pci/msi.c -@@ -32,16 +32,39 @@ static int pci_msi_enable = 1; - - int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc) - { -- return -EINVAL; -+ struct msi_chip *chip = dev->bus->msi; -+ int err; -+ -+ if (!chip || !chip->setup_irq) -+ return -EINVAL; -+ -+ err = chip->setup_irq(chip, dev, desc); -+ if (err < 0) -+ return err; -+ -+ irq_set_chip_data(desc->irq, chip); -+ -+ return 0; - } - - void __weak arch_teardown_msi_irq(unsigned int irq) - { -+ struct msi_chip *chip = irq_get_chip_data(irq); -+ -+ if (!chip || !chip->teardown_irq) -+ return; -+ -+ chip->teardown_irq(chip, irq); - } - - int __weak arch_msi_check_device(struct pci_dev *dev, int nvec, int type) - { -- return 0; -+ struct msi_chip *chip = dev->bus->msi; -+ -+ if (!chip || !chip->check_device) -+ return 0; -+ -+ return chip->check_device(chip, dev, nvec, type); - } - - int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) ---- a/drivers/pci/probe.c -+++ b/drivers/pci/probe.c -@@ -634,6 +634,7 @@ static struct pci_bus *pci_alloc_child_b - - child->parent = parent; - child->ops = parent->ops; -+ child->msi = parent->msi; - child->sysdata = parent->sysdata; - child->bus_flags = parent->bus_flags; - ---- a/include/linux/msi.h -+++ b/include/linux/msi.h -@@ -64,4 +64,15 @@ void arch_restore_msi_irqs(struct pci_de - void default_teardown_msi_irqs(struct pci_dev *dev); - void default_restore_msi_irqs(struct pci_dev *dev, int irq); - -+struct msi_chip { -+ struct module *owner; -+ struct device *dev; -+ -+ int (*setup_irq)(struct msi_chip *chip, struct pci_dev *dev, -+ struct msi_desc *desc); -+ void (*teardown_irq)(struct msi_chip *chip, unsigned int irq); -+ int (*check_device)(struct msi_chip *chip, struct pci_dev *dev, -+ int nvec, int type); -+}; -+ - #endif /* LINUX_MSI_H */ ---- a/include/linux/pci.h -+++ b/include/linux/pci.h -@@ -432,6 +432,7 @@ struct pci_bus { - struct resource busn_res; /* bus numbers routed to this bus */ - - struct pci_ops *ops; /* configuration access functions */ -+ struct msi_chip *msi; /* MSI controller */ - void *sysdata; /* hook for sys-specific extension */ - struct proc_dir_entry *procdir; /* directory entry in /proc/bus/pci */ - diff --git a/target/linux/mvebu/patches-3.10/0073-of-pci-add-registry-of-MSI-chips.patch b/target/linux/mvebu/patches-3.10/0073-of-pci-add-registry-of-MSI-chips.patch deleted file mode 100644 index 641b8d1701..0000000000 --- a/target/linux/mvebu/patches-3.10/0073-of-pci-add-registry-of-MSI-chips.patch +++ /dev/null @@ -1,106 +0,0 @@ -From a05852e828063b6731fcac543b87367c137c16f8 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Thu, 6 Jun 2013 18:21:18 +0200 -Subject: [PATCH 073/203] of: pci: add registry of MSI chips - -This commit adds a very basic registry of msi_chip structures, so that -an IRQ controller driver can register an msi_chip, and a PCIe host -controller can find it, based on a 'struct device_node'. - -Signed-off-by: Thomas Petazzoni -Acked-by: Benjamin Herrenschmidt -Acked-by: Rob Herring ---- - drivers/of/of_pci.c | 45 +++++++++++++++++++++++++++++++++++++++++++++ - include/linux/msi.h | 2 ++ - include/linux/of_pci.h | 12 ++++++++++++ - 3 files changed, 59 insertions(+) - ---- a/drivers/of/of_pci.c -+++ b/drivers/of/of_pci.c -@@ -89,3 +89,48 @@ int of_pci_parse_bus_range(struct device - return 0; - } - EXPORT_SYMBOL_GPL(of_pci_parse_bus_range); -+ -+#ifdef CONFIG_PCI_MSI -+ -+static LIST_HEAD(of_pci_msi_chip_list); -+static DEFINE_MUTEX(of_pci_msi_chip_mutex); -+ -+int of_pci_msi_chip_add(struct msi_chip *chip) -+{ -+ if (!of_property_read_bool(chip->of_node, "msi-controller")) -+ return -EINVAL; -+ -+ mutex_lock(&of_pci_msi_chip_mutex); -+ list_add(&chip->list, &of_pci_msi_chip_list); -+ mutex_unlock(&of_pci_msi_chip_mutex); -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(of_pci_msi_chip_add); -+ -+void of_pci_msi_chip_remove(struct msi_chip *chip) -+{ -+ mutex_lock(&of_pci_msi_chip_mutex); -+ list_del(&chip->list); -+ mutex_unlock(&of_pci_msi_chip_mutex); -+} -+EXPORT_SYMBOL_GPL(of_pci_msi_chip_remove); -+ -+struct msi_chip *of_pci_find_msi_chip_by_node(struct device_node *of_node) -+{ -+ struct msi_chip *c; -+ -+ mutex_lock(&of_pci_msi_chip_mutex); -+ list_for_each_entry(c, &of_pci_msi_chip_list, list) { -+ if (c->of_node == of_node) { -+ mutex_unlock(&of_pci_msi_chip_mutex); -+ return c; -+ } -+ } -+ mutex_unlock(&of_pci_msi_chip_mutex); -+ -+ return NULL; -+} -+EXPORT_SYMBOL_GPL(of_pci_find_msi_chip_by_node); -+ -+#endif /* CONFIG_PCI_MSI */ ---- a/include/linux/msi.h -+++ b/include/linux/msi.h -@@ -67,6 +67,8 @@ void default_restore_msi_irqs(struct pci - struct msi_chip { - struct module *owner; - struct device *dev; -+ struct device_node *of_node; -+ struct list_head list; - - int (*setup_irq)(struct msi_chip *chip, struct pci_dev *dev, - struct msi_desc *desc); ---- a/include/linux/of_pci.h -+++ b/include/linux/of_pci.h -@@ -2,6 +2,7 @@ - #define __OF_PCI_H - - #include -+#include - - struct pci_dev; - struct of_irq; -@@ -13,4 +14,15 @@ struct device_node *of_pci_find_child_de - int of_pci_get_devfn(struct device_node *np); - int of_pci_parse_bus_range(struct device_node *node, struct resource *res); - -+#if defined(CONFIG_OF) && defined(CONFIG_PCI_MSI) -+int of_pci_msi_chip_add(struct msi_chip *chip); -+void of_pci_msi_chip_remove(struct msi_chip *chip); -+struct msi_chip *of_pci_find_msi_chip_by_node(struct device_node *of_node); -+#else -+static inline int of_pci_msi_chip_add(struct msi_chip *chip) { return -EINVAL; } -+static inline void of_pci_msi_chip_remove(struct msi_chip *chip) { } -+static inline struct msi_chip * -+of_pci_find_msi_chip_by_node(struct device_node *of_node) { return NULL; } -+#endif -+ - #endif diff --git a/target/linux/mvebu/patches-3.10/0074-irqchip-armada-370-xp-properly-request-resources.patch b/target/linux/mvebu/patches-3.10/0074-irqchip-armada-370-xp-properly-request-resources.patch deleted file mode 100644 index 1cb99118c9..0000000000 --- a/target/linux/mvebu/patches-3.10/0074-irqchip-armada-370-xp-properly-request-resources.patch +++ /dev/null @@ -1,64 +0,0 @@ -From c8efa45217cbd780dafe12d87b61554c2e19a010 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Thu, 6 Jun 2013 18:22:51 +0200 -Subject: [PATCH 074/203] irqchip: armada-370-xp: properly request resources - -Instead of using of_iomap(), we now use of_address_to_resource(), -request_mem_region() and ioremap(). This allows the corresponding I/O -regions to be properly requested and visible in /proc/iomem. - -The main motivation for this change is that the introduction of the -MSI support requires us to get the physical address of the main -interrupt controller registers, so we will need the corresponding -'struct resource' anyway. - -We also take this opportunity to change a panic() to BUG_ON(), in -order to be consistent with the rest of the driver. - -Signed-off-by: Thomas Petazzoni -Tested-by: Daniel Price -Acked-by: Gregory CLEMENT ---- - drivers/irqchip/irq-armada-370-xp.c | 20 ++++++++++++++++---- - 1 file changed, 16 insertions(+), 4 deletions(-) - ---- a/drivers/irqchip/irq-armada-370-xp.c -+++ b/drivers/irqchip/irq-armada-370-xp.c -@@ -248,12 +248,25 @@ armada_370_xp_handle_irq(struct pt_regs - static int __init armada_370_xp_mpic_of_init(struct device_node *node, - struct device_node *parent) - { -+ struct resource main_int_res, per_cpu_int_res; - u32 control; - -- main_int_base = of_iomap(node, 0); -- per_cpu_int_base = of_iomap(node, 1); -+ BUG_ON(of_address_to_resource(node, 0, &main_int_res)); -+ BUG_ON(of_address_to_resource(node, 1, &per_cpu_int_res)); - -+ BUG_ON(!request_mem_region(main_int_res.start, -+ resource_size(&main_int_res), -+ node->full_name)); -+ BUG_ON(!request_mem_region(per_cpu_int_res.start, -+ resource_size(&per_cpu_int_res), -+ node->full_name)); -+ -+ main_int_base = ioremap(main_int_res.start, -+ resource_size(&main_int_res)); - BUG_ON(!main_int_base); -+ -+ per_cpu_int_base = ioremap(per_cpu_int_res.start, -+ resource_size(&per_cpu_int_res)); - BUG_ON(!per_cpu_int_base); - - control = readl(main_int_base + ARMADA_370_XP_INT_CONTROL); -@@ -262,8 +275,7 @@ static int __init armada_370_xp_mpic_of_ - irq_domain_add_linear(node, (control >> 2) & 0x3ff, - &armada_370_xp_mpic_irq_ops, NULL); - -- if (!armada_370_xp_mpic_domain) -- panic("Unable to add Armada_370_Xp MPIC irq domain (DT)\n"); -+ BUG_ON(!armada_370_xp_mpic_domain); - - irq_set_default_host(armada_370_xp_mpic_domain); - diff --git a/target/linux/mvebu/patches-3.10/0075-irqchip-armada-370-xp-implement-MSI-support.patch b/target/linux/mvebu/patches-3.10/0075-irqchip-armada-370-xp-implement-MSI-support.patch deleted file mode 100644 index 999b493c55..0000000000 --- a/target/linux/mvebu/patches-3.10/0075-irqchip-armada-370-xp-implement-MSI-support.patch +++ /dev/null @@ -1,270 +0,0 @@ -From eaa70d53f6b827f147d775a3de7ff3ef27d0fae6 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Thu, 6 Jun 2013 18:25:16 +0200 -Subject: [PATCH 075/203] irqchip: armada-370-xp: implement MSI support - -This commit introduces the support for the MSI interrupts in the -armada-370-xp interrupt controller driver. It registers an MSI chip to -the MSI chip registry, which will be used by the Marvell PCIe host -controller driver. - -The MSI interrupts use the 16 high doorbells, and are therefore -notified using IRQ1 of the main interrupt controller. - -Signed-off-by: Thomas Petazzoni -Acked-by: Gregory CLEMENT ---- - .../devicetree/bindings/arm/armada-370-xp-mpic.txt | 3 + - drivers/irqchip/irq-armada-370-xp.c | 182 ++++++++++++++++++++- - 2 files changed, 184 insertions(+), 1 deletion(-) - ---- a/Documentation/devicetree/bindings/arm/armada-370-xp-mpic.txt -+++ b/Documentation/devicetree/bindings/arm/armada-370-xp-mpic.txt -@@ -4,6 +4,8 @@ Marvell Armada 370 and Armada XP Interru - Required properties: - - compatible: Should be "marvell,mpic" - - interrupt-controller: Identifies the node as an interrupt controller. -+- msi-controller: Identifies the node as an PCI Message Signaled -+ Interrupt controller. - - #interrupt-cells: The number of cells to define the interrupts. Should be 1. - The cell is the IRQ number - -@@ -24,6 +26,7 @@ Example: - #address-cells = <1>; - #size-cells = <1>; - interrupt-controller; -+ msi-controller; - reg = <0xd0020a00 0x1d0>, - <0xd0021070 0x58>; - }; ---- a/drivers/irqchip/irq-armada-370-xp.c -+++ b/drivers/irqchip/irq-armada-370-xp.c -@@ -21,7 +21,10 @@ - #include - #include - #include -+#include - #include -+#include -+#include - #include - #include - #include -@@ -51,12 +54,22 @@ - #define IPI_DOORBELL_START (0) - #define IPI_DOORBELL_END (8) - #define IPI_DOORBELL_MASK 0xFF -+#define PCI_MSI_DOORBELL_START (16) -+#define PCI_MSI_DOORBELL_NR (16) -+#define PCI_MSI_DOORBELL_END (32) -+#define PCI_MSI_DOORBELL_MASK 0xFFFF0000 - - static DEFINE_RAW_SPINLOCK(irq_controller_lock); - - static void __iomem *per_cpu_int_base; - static void __iomem *main_int_base; - static struct irq_domain *armada_370_xp_mpic_domain; -+#ifdef CONFIG_PCI_MSI -+static struct irq_domain *armada_370_xp_msi_domain; -+static DECLARE_BITMAP(msi_used, PCI_MSI_DOORBELL_NR); -+static DEFINE_MUTEX(msi_used_lock); -+static phys_addr_t msi_doorbell_addr; -+#endif - - /* - * In SMP mode: -@@ -87,6 +100,144 @@ static void armada_370_xp_irq_unmask(str - ARMADA_370_XP_INT_CLEAR_MASK_OFFS); - } - -+#ifdef CONFIG_PCI_MSI -+ -+static int armada_370_xp_alloc_msi(void) -+{ -+ int hwirq; -+ -+ mutex_lock(&msi_used_lock); -+ hwirq = find_first_zero_bit(&msi_used, PCI_MSI_DOORBELL_NR); -+ if (hwirq >= PCI_MSI_DOORBELL_NR) -+ hwirq = -ENOSPC; -+ else -+ set_bit(hwirq, msi_used); -+ mutex_unlock(&msi_used_lock); -+ -+ return hwirq; -+} -+ -+static void armada_370_xp_free_msi(int hwirq) -+{ -+ mutex_lock(&msi_used_lock); -+ if (!test_bit(hwirq, msi_used)) -+ pr_err("trying to free unused MSI#%d\n", hwirq); -+ else -+ clear_bit(hwirq, msi_used); -+ mutex_unlock(&msi_used_lock); -+} -+ -+static int armada_370_xp_setup_msi_irq(struct msi_chip *chip, -+ struct pci_dev *pdev, -+ struct msi_desc *desc) -+{ -+ struct msi_msg msg; -+ irq_hw_number_t hwirq; -+ int virq; -+ -+ hwirq = armada_370_xp_alloc_msi(); -+ if (hwirq < 0) -+ return hwirq; -+ -+ virq = irq_create_mapping(armada_370_xp_msi_domain, hwirq); -+ if (!virq) { -+ armada_370_xp_free_msi(hwirq); -+ return -EINVAL; -+ } -+ -+ irq_set_msi_desc(virq, desc); -+ -+ msg.address_lo = msi_doorbell_addr; -+ msg.address_hi = 0; -+ msg.data = 0xf00 | (hwirq + 16); -+ -+ write_msi_msg(virq, &msg); -+ return 0; -+} -+ -+static void armada_370_xp_teardown_msi_irq(struct msi_chip *chip, -+ unsigned int irq) -+{ -+ struct irq_data *d = irq_get_irq_data(irq); -+ irq_dispose_mapping(irq); -+ armada_370_xp_free_msi(d->hwirq); -+} -+ -+static struct irq_chip armada_370_xp_msi_irq_chip = { -+ .name = "armada_370_xp_msi_irq", -+ .irq_enable = unmask_msi_irq, -+ .irq_disable = mask_msi_irq, -+ .irq_mask = mask_msi_irq, -+ .irq_unmask = unmask_msi_irq, -+}; -+ -+static int armada_370_xp_msi_map(struct irq_domain *domain, unsigned int virq, -+ irq_hw_number_t hw) -+{ -+ irq_set_chip_and_handler(virq, &armada_370_xp_msi_irq_chip, -+ handle_simple_irq); -+ set_irq_flags(virq, IRQF_VALID); -+ -+ return 0; -+} -+ -+static const struct irq_domain_ops armada_370_xp_msi_irq_ops = { -+ .map = armada_370_xp_msi_map, -+}; -+ -+static int armada_370_xp_msi_init(struct device_node *node, -+ phys_addr_t main_int_phys_base) -+{ -+ struct msi_chip *msi_chip; -+ u32 reg; -+ int ret; -+ -+ msi_doorbell_addr = main_int_phys_base + -+ ARMADA_370_XP_SW_TRIG_INT_OFFS; -+ -+ msi_chip = kzalloc(sizeof(*msi_chip), GFP_KERNEL); -+ if (!msi_chip) -+ return -ENOMEM; -+ -+ msi_chip->setup_irq = armada_370_xp_setup_msi_irq; -+ msi_chip->teardown_irq = armada_370_xp_teardown_msi_irq; -+ msi_chip->of_node = node; -+ -+ armada_370_xp_msi_domain = -+ irq_domain_add_linear(NULL, PCI_MSI_DOORBELL_NR, -+ &armada_370_xp_msi_irq_ops, -+ NULL); -+ if (!armada_370_xp_msi_domain) { -+ kfree(msi_chip); -+ return -ENOMEM; -+ } -+ -+ ret = of_pci_msi_chip_add(msi_chip); -+ if (ret < 0) { -+ irq_domain_remove(armada_370_xp_msi_domain); -+ kfree(msi_chip); -+ return ret; -+ } -+ -+ reg = readl(per_cpu_int_base + ARMADA_370_XP_IN_DRBEL_MSK_OFFS) -+ | PCI_MSI_DOORBELL_MASK; -+ -+ writel(reg, per_cpu_int_base + -+ ARMADA_370_XP_IN_DRBEL_MSK_OFFS); -+ -+ /* Unmask IPI interrupt */ -+ writel(1, per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS); -+ -+ return 0; -+} -+#else -+static inline int armada_370_xp_msi_init(struct device_node *node, -+ phys_addr_t main_int_phys_base) -+{ -+ return 0; -+} -+#endif -+ - #ifdef CONFIG_SMP - static int armada_xp_set_affinity(struct irq_data *d, - const struct cpumask *mask_val, bool force) -@@ -214,12 +365,39 @@ armada_370_xp_handle_irq(struct pt_regs - if (irqnr > 1022) - break; - -- if (irqnr > 0) { -+ if (irqnr > 1) { - irqnr = irq_find_mapping(armada_370_xp_mpic_domain, - irqnr); - handle_IRQ(irqnr, regs); - continue; - } -+ -+#ifdef CONFIG_PCI_MSI -+ /* MSI handling */ -+ if (irqnr == 1) { -+ u32 msimask, msinr; -+ -+ msimask = readl_relaxed(per_cpu_int_base + -+ ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS) -+ & PCI_MSI_DOORBELL_MASK; -+ -+ writel(~PCI_MSI_DOORBELL_MASK, per_cpu_int_base + -+ ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS); -+ -+ for (msinr = PCI_MSI_DOORBELL_START; -+ msinr < PCI_MSI_DOORBELL_END; msinr++) { -+ int irq; -+ -+ if (!(msimask & BIT(msinr))) -+ continue; -+ -+ irq = irq_find_mapping(armada_370_xp_msi_domain, -+ msinr - 16); -+ handle_IRQ(irq, regs); -+ } -+ } -+#endif -+ - #ifdef CONFIG_SMP - /* IPI Handling */ - if (irqnr == 0) { -@@ -292,6 +470,8 @@ static int __init armada_370_xp_mpic_of_ - - #endif - -+ armada_370_xp_msi_init(node, main_int_res.start); -+ - set_handle_irq(armada_370_xp_handle_irq); - - return 0; diff --git a/target/linux/mvebu/patches-3.10/0076-ARM-pci-add-add_bus-and-remove_bus-hooks-to-hw_pci.patch b/target/linux/mvebu/patches-3.10/0076-ARM-pci-add-add_bus-and-remove_bus-hooks-to-hw_pci.patch deleted file mode 100644 index adae3145b9..0000000000 --- a/target/linux/mvebu/patches-3.10/0076-ARM-pci-add-add_bus-and-remove_bus-hooks-to-hw_pci.patch +++ /dev/null @@ -1,80 +0,0 @@ -From ea6a42a34462ea382209ff4f083b8b17260eb409 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Wed, 19 Jun 2013 18:27:20 +0200 -Subject: [PATCH 076/203] ARM: pci: add ->add_bus() and ->remove_bus() hooks to - hw_pci - -Some PCI drivers may need to adjust the pci_bus structure after it has -been allocated by the Linux PCI core. The PCI core allows -architectures to implement the pcibios_add_bus() and -pcibios_remove_bus() for this purpose. This commit therefore extends -the hw_pci and pci_sys_data structures of the ARM PCI core to allow -PCI drivers to register ->add_bus() and ->remove_bus() in hw_pci, -which will get called when a bus is added or removed from the system. - -This will be used for example by the Marvell PCIe driver to connect a -particular PCI bus with its corresponding MSI chip to handle Message -Signaled Interrupts. - -Signed-off-by: Thomas Petazzoni -Reviewed-by: Thierry Reding -Acked-by: Russell King -Tested-by: Daniel Price -Tested-by: Thierry Reding ---- - arch/arm/include/asm/mach/pci.h | 4 ++++ - arch/arm/kernel/bios32.c | 16 ++++++++++++++++ - 2 files changed, 20 insertions(+) - ---- a/arch/arm/include/asm/mach/pci.h -+++ b/arch/arm/include/asm/mach/pci.h -@@ -35,6 +35,8 @@ struct hw_pci { - resource_size_t start, - resource_size_t size, - resource_size_t align); -+ void (*add_bus)(struct pci_bus *bus); -+ void (*remove_bus)(struct pci_bus *bus); - }; - - /* -@@ -62,6 +64,8 @@ struct pci_sys_data { - resource_size_t start, - resource_size_t size, - resource_size_t align); -+ void (*add_bus)(struct pci_bus *bus); -+ void (*remove_bus)(struct pci_bus *bus); - void *private_data; /* platform controller private data */ - }; - ---- a/arch/arm/kernel/bios32.c -+++ b/arch/arm/kernel/bios32.c -@@ -363,6 +363,20 @@ void pcibios_fixup_bus(struct pci_bus *b - } - EXPORT_SYMBOL(pcibios_fixup_bus); - -+void pcibios_add_bus(struct pci_bus *bus) -+{ -+ struct pci_sys_data *sys = bus->sysdata; -+ if (sys->add_bus) -+ sys->add_bus(bus); -+} -+ -+void pcibios_remove_bus(struct pci_bus *bus) -+{ -+ struct pci_sys_data *sys = bus->sysdata; -+ if (sys->remove_bus) -+ sys->remove_bus(bus); -+} -+ - /* - * Swizzle the device pin each time we cross a bridge. If a platform does - * not provide a swizzle function, we perform the standard PCI swizzling. -@@ -463,6 +477,8 @@ static void pcibios_init_hw(struct hw_pc - sys->swizzle = hw->swizzle; - sys->map_irq = hw->map_irq; - sys->align_resource = hw->align_resource; -+ sys->add_bus = hw->add_bus; -+ sys->remove_bus = hw->remove_bus; - INIT_LIST_HEAD(&sys->resources); - - if (hw->private_data) diff --git a/target/linux/mvebu/patches-3.10/0077-ARM-mvebu-the-MPIC-now-provides-MSI-controller-featu.patch b/target/linux/mvebu/patches-3.10/0077-ARM-mvebu-the-MPIC-now-provides-MSI-controller-featu.patch deleted file mode 100644 index dcce8691d6..0000000000 --- a/target/linux/mvebu/patches-3.10/0077-ARM-mvebu-the-MPIC-now-provides-MSI-controller-featu.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 2ae5acab1c267ef1c5e61e5086b93fba8eb9752e Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Thu, 6 Jun 2013 18:26:29 +0200 -Subject: [PATCH 077/203] ARM: mvebu: the MPIC now provides MSI controller - features - -Adds the 'msi-controller' property to the main interrupt controller -Device Tree node, to indicate that it can now behave as a MSI -controller. - -Signed-off-by: Thomas Petazzoni -Reviewed-by: Thierry Reding -Tested-by: Daniel Price -Acked-by: Gregory CLEMENT ---- - arch/arm/boot/dts/armada-370-xp.dtsi | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm/boot/dts/armada-370-xp.dtsi -+++ b/arch/arm/boot/dts/armada-370-xp.dtsi -@@ -109,6 +109,7 @@ - #interrupt-cells = <1>; - #size-cells = <1>; - interrupt-controller; -+ msi-controller; - }; - - coherency-fabric@20200 { diff --git a/target/linux/mvebu/patches-3.10/0078-PCI-mvebu-add-support-for-MSI.patch b/target/linux/mvebu/patches-3.10/0078-PCI-mvebu-add-support-for-MSI.patch deleted file mode 100644 index 9121b82dc6..0000000000 --- a/target/linux/mvebu/patches-3.10/0078-PCI-mvebu-add-support-for-MSI.patch +++ /dev/null @@ -1,109 +0,0 @@ -From be448338edda73460dc3e8c005b17edddf1c1b4f Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Thu, 6 Jun 2013 18:27:16 +0200 -Subject: [PATCH 078/203] PCI: mvebu: add support for MSI - -This commit adds support for Message Signaled Interrupts in the -Marvell PCIe host controller. The work is very simple: it simply gets -a reference to the msi_chip associated to the PCIe controller thanks -to the msi-parent DT property, and stores this reference in the -pci_bus structure. This is enough to let the Linux PCI core use the -functions of msi_chip to setup and teardown MSIs. - -Signed-off-by: Thomas Petazzoni -Reviewed-by: Thierry Reding -Acked-by: Bjorn Helgaas ---- - .../devicetree/bindings/pci/mvebu-pci.txt | 3 +++ - drivers/pci/host/pci-mvebu.c | 26 ++++++++++++++++++++++ - 2 files changed, 29 insertions(+) - ---- a/Documentation/devicetree/bindings/pci/mvebu-pci.txt -+++ b/Documentation/devicetree/bindings/pci/mvebu-pci.txt -@@ -14,6 +14,8 @@ Mandatory properties: - interfaces, and ranges describing the MBus windows needed to access - the memory and I/O regions of each PCIe interface. - -+- msi-parent: Link to the hardware entity that serves as the Message -+ Signaled Interrupt controller for this PCI controller. - The ranges describing the MMIO registers have the following layout: - - 0x82000000 0 r MBUS_ID(0xf0, 0x01) r 0 s -@@ -85,6 +87,7 @@ pcie-controller { - #size-cells = <2>; - - bus-range = <0x00 0xff>; -+ msi-parent = <&mpic>; - - ranges = - <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ ---- a/drivers/pci/host/pci-mvebu.c -+++ b/drivers/pci/host/pci-mvebu.c -@@ -11,6 +11,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -103,6 +104,7 @@ struct mvebu_pcie_port; - struct mvebu_pcie { - struct platform_device *pdev; - struct mvebu_pcie_port *ports; -+ struct msi_chip *msi; - struct resource io; - struct resource realio; - struct resource mem; -@@ -673,6 +675,12 @@ static struct pci_bus *mvebu_pcie_scan_b - return bus; - } - -+void mvebu_pcie_add_bus(struct pci_bus *bus) -+{ -+ struct mvebu_pcie *pcie = sys_to_pcie(bus->sysdata); -+ bus->msi = pcie->msi; -+} -+ - resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev, - const struct resource *res, - resource_size_t start, -@@ -709,6 +717,7 @@ static void __init mvebu_pcie_enable(str - hw.map_irq = mvebu_pcie_map_irq; - hw.ops = &mvebu_pcie_ops; - hw.align_resource = mvebu_pcie_align_resource; -+ hw.add_bus = mvebu_pcie_add_bus; - - pci_common_init(&hw); - } -@@ -733,6 +742,21 @@ mvebu_pcie_map_registers(struct platform - return devm_request_and_ioremap(&pdev->dev, ®s); - } - -+static void __init mvebu_pcie_msi_enable(struct mvebu_pcie *pcie) -+{ -+ struct device_node *msi_node; -+ -+ msi_node = of_parse_phandle(pcie->pdev->dev.of_node, -+ "msi-parent", 0); -+ if (!msi_node) -+ return; -+ -+ pcie->msi = of_pci_find_msi_chip_by_node(msi_node); -+ -+ if (pcie->msi) -+ pcie->msi->dev = &pcie->pdev->dev; -+} -+ - #define DT_FLAGS_TO_TYPE(flags) (((flags) >> 24) & 0x03) - #define DT_TYPE_IO 0x1 - #define DT_TYPE_MEM32 0x2 -@@ -911,6 +935,8 @@ static int __init mvebu_pcie_probe(struc - i++; - } - -+ mvebu_pcie_msi_enable(pcie); -+ - mvebu_pcie_enable(pcie); - - return 0; diff --git a/target/linux/mvebu/patches-3.10/0079-ARM-mvebu-link-PCIe-controllers-to-the-MSI-controlle.patch b/target/linux/mvebu/patches-3.10/0079-ARM-mvebu-link-PCIe-controllers-to-the-MSI-controlle.patch deleted file mode 100644 index 3cb1bf3a84..0000000000 --- a/target/linux/mvebu/patches-3.10/0079-ARM-mvebu-link-PCIe-controllers-to-the-MSI-controlle.patch +++ /dev/null @@ -1,60 +0,0 @@ -From 7171305e9caebac8cd12ef5a5ef3823f0fbe4a1c Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Thu, 6 Jun 2013 18:30:19 +0200 -Subject: [PATCH 079/203] ARM: mvebu: link PCIe controllers to the MSI - controller - -This commit adjusts the Armada 370 and Armada XP PCIe controllers -Device Tree informations to reference their MSI controller. In the -case of this platform, the MSI controller is implemented by the MPIC. - -Signed-off-by: Thomas Petazzoni -Tested-by: Daniel Price -Acked-by: Gregory CLEMENT ---- - arch/arm/boot/dts/armada-370.dtsi | 1 + - arch/arm/boot/dts/armada-xp-mv78230.dtsi | 1 + - arch/arm/boot/dts/armada-xp-mv78260.dtsi | 1 + - arch/arm/boot/dts/armada-xp-mv78460.dtsi | 1 + - 4 files changed, 4 insertions(+) - ---- a/arch/arm/boot/dts/armada-370.dtsi -+++ b/arch/arm/boot/dts/armada-370.dtsi -@@ -44,6 +44,7 @@ - #address-cells = <3>; - #size-cells = <2>; - -+ msi-parent = <&mpic>; - bus-range = <0x00 0xff>; - - ranges = ---- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi -+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi -@@ -57,6 +57,7 @@ - #address-cells = <3>; - #size-cells = <2>; - -+ msi-parent = <&mpic>; - bus-range = <0x00 0xff>; - - ranges = ---- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi -+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi -@@ -58,6 +58,7 @@ - #address-cells = <3>; - #size-cells = <2>; - -+ msi-parent = <&mpic>; - bus-range = <0x00 0xff>; - - ranges = ---- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi -+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi -@@ -74,6 +74,7 @@ - #address-cells = <3>; - #size-cells = <2>; - -+ msi-parent = <&mpic>; - bus-range = <0x00 0xff>; - - ranges = diff --git a/target/linux/mvebu/patches-3.10/0080-of-provide-a-binding-for-the-fixed-link-property.patch b/target/linux/mvebu/patches-3.10/0080-of-provide-a-binding-for-the-fixed-link-property.patch deleted file mode 100644 index 76105b39fc..0000000000 --- a/target/linux/mvebu/patches-3.10/0080-of-provide-a-binding-for-the-fixed-link-property.patch +++ /dev/null @@ -1,132 +0,0 @@ -From 5378928ebac13756fc13d0b2de8dd45ace8026aa Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Mon, 15 Jul 2013 17:34:08 +0200 -Subject: [PATCH 080/203] of: provide a binding for the 'fixed-link' property - -Some Ethernet MACs have a "fixed link", and are not connected to a -normal MDIO-managed PHY device. For those situations, a Device Tree -binding allows to describe a "fixed link", as a "fixed-link" property -of the Ethernet device Device Tree node. - -This patch adds: - - * A documentation for the Device Tree property "fixed-link". - - * A of_phy_register_fixed_link() OF helper, which provided an OF node - that contains a "fixed-link" property, registers the corresponding - fixed PHY. - - * Removes the warning on the of_phy_connect_fixed_link() that says - new drivers should not use it, since Grant Likely indicated that - this "fixed-link" property is indeed the way to go. - -Signed-off-by: Thomas Petazzoni ---- - .../devicetree/bindings/net/fixed-link.txt | 26 ++++++++++++++++ - drivers/of/of_mdio.c | 36 +++++++++++++++++++--- - include/linux/of_mdio.h | 10 ++++++ - 3 files changed, 68 insertions(+), 4 deletions(-) - create mode 100644 Documentation/devicetree/bindings/net/fixed-link.txt - ---- /dev/null -+++ b/Documentation/devicetree/bindings/net/fixed-link.txt -@@ -0,0 +1,26 @@ -+Fixed link Device Tree binding -+------------------------------ -+ -+Some Ethernet MACs have a "fixed link", and are not connected to a -+normal MDIO-managed PHY device. For those situations, a Device Tree -+binding allows to describe a "fixed link". -+ -+Such a fixed link situation is described within an Ethernet device -+Device Tree node using a 'fixed-link' property, composed of 5 -+elements: -+ -+ 1. A fake PHY ID, which must be unique accross all fixed-link PHYs in -+ the system. -+ 2. The duplex (1 for full-duplex, 0 for half-duplex) -+ 3. The speed (10, 100, 1000) -+ 4. The pause setting (1 for enabled, 0 for disabled) -+ 5. The asym pause setting (1 for enabled, 0 for disabled) -+ -+Example: -+ -+ethernet@0 { -+ ... -+ fixed-link = <1 1 1000 0 0>; -+ ... -+}; -+ ---- a/drivers/of/of_mdio.c -+++ b/drivers/of/of_mdio.c -@@ -14,6 +14,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -215,10 +216,6 @@ EXPORT_SYMBOL(of_phy_connect); - * @dev: pointer to net_device claiming the phy - * @hndlr: Link state callback for the network device - * @iface: PHY data interface type -- * -- * This function is a temporary stop-gap and will be removed soon. It is -- * only to support the fs_enet, ucc_geth and gianfar Ethernet drivers. Do -- * not call this function from new drivers. - */ - struct phy_device *of_phy_connect_fixed_link(struct net_device *dev, - void (*hndlr)(struct net_device *), -@@ -247,3 +244,34 @@ struct phy_device *of_phy_connect_fixed_ - return IS_ERR(phy) ? NULL : phy; - } - EXPORT_SYMBOL(of_phy_connect_fixed_link); -+ -+#if defined(CONFIG_FIXED_PHY) -+/** -+ * of_phy_register_fixed_link - Parse fixed-link property and register a dummy phy -+ * @np: pointer to the OF device node that contains the "fixed-link" -+ * property for which a dummy phy should be registered. -+ */ -+#define FIXED_LINK_PROPERTIES_COUNT 5 -+int of_phy_register_fixed_link(struct device_node *np) -+{ -+ struct fixed_phy_status status = {}; -+ u32 fixed_link_props[FIXED_LINK_PROPERTIES_COUNT]; -+ int ret; -+ -+ ret = of_property_read_u32_array(np, "fixed-link", -+ fixed_link_props, -+ FIXED_LINK_PROPERTIES_COUNT); -+ if (ret < 0) -+ return ret; -+ -+ status.link = 1; -+ status.duplex = fixed_link_props[1]; -+ status.speed = fixed_link_props[2]; -+ status.pause = fixed_link_props[3]; -+ status.asym_pause = fixed_link_props[4]; -+ -+ return fixed_phy_add(PHY_POLL, fixed_link_props[0], -+ &status); -+} -+EXPORT_SYMBOL(of_phy_register_fixed_link); -+#endif ---- a/include/linux/of_mdio.h -+++ b/include/linux/of_mdio.h -@@ -57,4 +57,14 @@ static inline struct mii_bus *of_mdio_fi - } - #endif /* CONFIG_OF */ - -+#if defined(CONFIG_OF) && defined(CONFIG_FIXED_PHY) -+extern int of_phy_register_fixed_link(struct device_node *np); -+#else -+static inline int of_phy_register_fixed_link(struct device_node *np) -+{ -+ return -ENOSYS; -+} -+#endif -+ -+ - #endif /* __LINUX_OF_MDIO_H */ diff --git a/target/linux/mvebu/patches-3.10/0081-net-phy-call-mdiobus_scan-after-adding-a-fixed-PHY.patch b/target/linux/mvebu/patches-3.10/0081-net-phy-call-mdiobus_scan-after-adding-a-fixed-PHY.patch deleted file mode 100644 index c052068138..0000000000 --- a/target/linux/mvebu/patches-3.10/0081-net-phy-call-mdiobus_scan-after-adding-a-fixed-PHY.patch +++ /dev/null @@ -1,42 +0,0 @@ -From dce33dc5a6ba5f7fcbab4d7e92cc68c756a1f714 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Mon, 15 Jul 2013 17:34:09 +0200 -Subject: [PATCH 081/203] net: phy: call mdiobus_scan() after adding a fixed - PHY - -The fixed_phy_add() function allows to register a fixed PHY. However, -when this function gets called *after* fixed_mdio_bus_init() (which -gets called at the module_init stage), then the fixed PHY is not -registered into the phylib. - -In order to address this, we add a call to mdiobus_scan() in -fixed_phy_add() to ensure that the PHY indeed gets registered into the -phylib, even if the fixed_phy_add() is called after -fixed_mdio_bus_init(). - -This is needed because until now, the only code that was calling the -fixed_add_phy() function was PowerPC-specific platform code, which -could ensure that such fixed PHYs get registered before -fixed_mdio_bus_init() is called. - -However, with the new of_phy_register_fixed_link() function, device -drivers can parse their 'fixed-link' property and register a fixed PHY -at ->probe() time, which may happen after fixed_mdio_bus_init() is -called. - -Signed-off-by: Thomas Petazzoni ---- - drivers/net/phy/fixed.c | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/drivers/net/phy/fixed.c -+++ b/drivers/net/phy/fixed.c -@@ -195,6 +195,8 @@ int fixed_phy_add(unsigned int irq, int - - list_add_tail(&fp->node, &fmb->phys); - -+ mdiobus_scan(fmb->mii_bus, phy_id); -+ - return 0; - - err_regs: diff --git a/target/linux/mvebu/patches-3.10/0082-net-mvneta-add-support-for-fixed-links.patch b/target/linux/mvebu/patches-3.10/0082-net-mvneta-add-support-for-fixed-links.patch deleted file mode 100644 index 019d80921b..0000000000 --- a/target/linux/mvebu/patches-3.10/0082-net-mvneta-add-support-for-fixed-links.patch +++ /dev/null @@ -1,90 +0,0 @@ -From 350a4e8e9d517d2d7c48bc915da5b1e30163add3 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Mon, 15 Jul 2013 17:34:10 +0200 -Subject: [PATCH 082/203] net: mvneta: add support for fixed links - -Following the introduction of of_phy_register_fixed_link(), this patch -introduces fixed link support in the mvneta driver, for Marvell Armada -370/XP SOCs. - -Signed-off-by: Thomas Petazzoni ---- - .../bindings/net/marvell-armada-370-neta.txt | 24 +++++++++++++++++++--- - drivers/net/ethernet/marvell/mvneta.c | 18 +++++++++++----- - 2 files changed, 34 insertions(+), 8 deletions(-) - ---- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt -+++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt -@@ -4,13 +4,21 @@ Required properties: - - compatible: should be "marvell,armada-370-neta". - - reg: address and length of the register set for the device. - - interrupts: interrupt for the device --- phy: A phandle to a phy node defining the PHY address (as the reg -- property, a single integer). - - phy-mode: The interface between the SoC and the PHY (a string that - of_get_phy_mode() can understand) - - clocks: a pointer to the reference clock for this device. - --Example: -+Optional properties: -+ -+- phy: A phandle to a phy node defining the PHY address (as the reg -+ property, a single integer). Note: if this property isn't present, -+ then fixed link is assumed, and the 'fixed-link' property is -+ mandatory. -+- fixed-link: A 5 elements array that describe a fixed link, see -+ fixed-link.txt for details. Note: if a 'phy' property is present, -+ this 'fixed-link' property is ignored. -+ -+Examples: - - ethernet@d0070000 { - compatible = "marvell,armada-370-neta"; -@@ -21,3 +29,13 @@ ethernet@d0070000 { - phy = <&phy0>; - phy-mode = "rgmii-id"; - }; -+ -+ethernet@d0070000 { -+ compatible = "marvell,armada-370-neta"; -+ reg = <0xd0070000 0x2500>; -+ interrupts = <8>; -+ clocks = <&gate_clk 4>; -+ status = "okay"; -+ fixed-link = <1 1 1000 0 0>; -+ phy-mode = "rgmii-id"; -+}; ---- a/drivers/net/ethernet/marvell/mvneta.c -+++ b/drivers/net/ethernet/marvell/mvneta.c -@@ -2360,8 +2360,12 @@ static int mvneta_mdio_probe(struct mvne - { - struct phy_device *phy_dev; - -- phy_dev = of_phy_connect(pp->dev, pp->phy_node, mvneta_adjust_link, 0, -- pp->phy_interface); -+ if (pp->phy_node) -+ phy_dev = of_phy_connect(pp->dev, pp->phy_node, mvneta_adjust_link, 0, -+ pp->phy_interface); -+ else -+ phy_dev = of_phy_connect_fixed_link(pp->dev, mvneta_adjust_link, -+ pp->phy_interface); - if (!phy_dev) { - netdev_err(pp->dev, "could not find the PHY\n"); - return -ENODEV; -@@ -2719,9 +2723,13 @@ static int mvneta_probe(struct platform_ - - phy_node = of_parse_phandle(dn, "phy", 0); - if (!phy_node) { -- dev_err(&pdev->dev, "no associated PHY\n"); -- err = -ENODEV; -- goto err_free_irq; -+ /* No 'phy' found, see if we have a 'fixed-link' -+ * property */ -+ err = of_phy_register_fixed_link(dn); -+ if (err < 0) { -+ dev_err(&pdev->dev, "no 'phy' or 'fixed-link' properties\n"); -+ goto err_free_irq; -+ } - } - - phy_mode = of_get_phy_mode(dn); diff --git a/target/linux/mvebu/patches-3.10/0083-clocksource-armada-370-xp-Use-CLOCKSOURCE_OF_DECLARE.patch b/target/linux/mvebu/patches-3.10/0083-clocksource-armada-370-xp-Use-CLOCKSOURCE_OF_DECLARE.patch deleted file mode 100644 index 3e20113302..0000000000 --- a/target/linux/mvebu/patches-3.10/0083-clocksource-armada-370-xp-Use-CLOCKSOURCE_OF_DECLARE.patch +++ /dev/null @@ -1,84 +0,0 @@ -From 409885c9ec1b0dba5c8f393af6d481c69bfa9b0a Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Tue, 13 Aug 2013 11:43:12 -0300 -Subject: [PATCH 083/203] clocksource: armada-370-xp: Use - CLOCKSOURCE_OF_DECLARE - -This is almost cosmetic: we achieve a bit of consistency with -other clocksource drivers by using the CLOCKSOURCE_OF_DECLARE -macro for the boilerplate code. - -Signed-off-by: Ezequiel Garcia -Signed-off-by: Daniel Lezcano -Reviewed-by: Andrew Lunn ---- - arch/arm/mach-mvebu/armada-370-xp.c | 4 ++-- - drivers/clocksource/time-armada-370-xp.c | 6 +++--- - include/linux/time-armada-370-xp.h | 18 ------------------ - 3 files changed, 5 insertions(+), 23 deletions(-) - delete mode 100644 include/linux/time-armada-370-xp.h - ---- a/arch/arm/mach-mvebu/armada-370-xp.c -+++ b/arch/arm/mach-mvebu/armada-370-xp.c -@@ -17,7 +17,7 @@ - #include - #include - #include --#include -+#include - #include - #include - #include -@@ -38,7 +38,7 @@ static void __init armada_370_xp_map_io( - static void __init armada_370_xp_timer_and_clk_init(void) - { - mvebu_clocks_init(); -- armada_370_xp_timer_init(); -+ clocksource_of_init(); - coherency_init(); - BUG_ON(mvebu_mbus_dt_init()); - #ifdef CONFIG_CACHE_L2X0 ---- a/drivers/clocksource/time-armada-370-xp.c -+++ b/drivers/clocksource/time-armada-370-xp.c -@@ -210,13 +210,11 @@ static struct local_timer_ops armada_370 - .stop = armada_370_xp_timer_stop, - }; - --void __init armada_370_xp_timer_init(void) -+static void __init armada_370_xp_timer_init(struct device_node *np) - { - u32 u; -- struct device_node *np; - int res; - -- np = of_find_compatible_node(NULL, NULL, "marvell,armada-370-xp-timer"); - timer_base = of_iomap(np, 0); - WARN_ON(!timer_base); - local_base = of_iomap(np, 1); -@@ -299,3 +297,5 @@ void __init armada_370_xp_timer_init(voi - #endif - } - } -+CLOCKSOURCE_OF_DECLARE(armada_370_xp, "marvell,armada-370-xp-timer", -+ armada_370_xp_timer_init); ---- a/include/linux/time-armada-370-xp.h -+++ /dev/null -@@ -1,18 +0,0 @@ --/* -- * Marvell Armada 370/XP SoC timer handling. -- * -- * Copyright (C) 2012 Marvell -- * -- * Lior Amsalem -- * Gregory CLEMENT -- * Thomas Petazzoni -- * -- */ --#ifndef __TIME_ARMADA_370_XPPRCMU_H --#define __TIME_ARMADA_370_XPPRCMU_H -- --#include -- --void __init armada_370_xp_timer_init(void); -- --#endif diff --git a/target/linux/mvebu/patches-3.10/0084-arm-clocksource-mvebu-Use-the-main-timer-as-clock-so.patch b/target/linux/mvebu/patches-3.10/0084-arm-clocksource-mvebu-Use-the-main-timer-as-clock-so.patch deleted file mode 100644 index dccc259cd7..0000000000 --- a/target/linux/mvebu/patches-3.10/0084-arm-clocksource-mvebu-Use-the-main-timer-as-clock-so.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 02b0213923da41034a766942508d882f9be51efd Mon Sep 17 00:00:00 2001 -From: Jean Pihet -Date: Wed, 18 Sep 2013 20:55:09 +0200 -Subject: [PATCH 084/203] arm: clocksource: mvebu: Use the main timer as clock - source from DT - -This commit: - 573145f08c2b92c45498468afbbba909f6ce6135 - clocksource: armada-370-xp: Use CLOCKSOURCE_OF_DECLARE - -replaced a call to the driver's timer initialization by a call to -clocksource_of_init(). However, it failed to select CONFIG_CLKSRC_OF. - -Fix this by selecting CONFIG_CLKSRC_OF for Armada370/XP machines. -Without this change the kernel is stuck at: 'Calibrating delay loop...'. - -Signed-off-by: Jean Pihet -Acked-by: Ezequiel Garcia -Signed-off-by: Daniel Lezcano ---- - drivers/clocksource/Kconfig | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/clocksource/Kconfig -+++ b/drivers/clocksource/Kconfig -@@ -24,6 +24,7 @@ config DW_APB_TIMER_OF - - config ARMADA_370_XP_TIMER - bool -+ select CLKSRC_OF - - config SUN4I_TIMER - bool diff --git a/target/linux/mvebu/patches-3.10/0086-irqchip-armada-370-xp-fix-MSI-race-condition.patch b/target/linux/mvebu/patches-3.10/0086-irqchip-armada-370-xp-fix-MSI-race-condition.patch deleted file mode 100644 index ebbc532391..0000000000 --- a/target/linux/mvebu/patches-3.10/0086-irqchip-armada-370-xp-fix-MSI-race-condition.patch +++ /dev/null @@ -1,44 +0,0 @@ -From ddda6fa410b6e50ee67d4a628187e76b4a6c9b28 Mon Sep 17 00:00:00 2001 -From: Lior Amsalem -Date: Mon, 25 Nov 2013 17:26:45 +0100 -Subject: [PATCH 086/203] irqchip: armada-370-xp: fix MSI race condition - -In the Armada 370/XP driver, when we receive an IRQ 1, we read the -list of doorbells that caused the interrupt from register -ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS. This gives the list of MSIs that -were generated. However, instead of acknowledging only the MSIs that -were generated, we acknowledge *all* the MSIs, by writing -~MSI_DOORBELL_MASK in the ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS register. - -This creates a race condition: if a new MSI that isn't part of the -ones read into the temporary "msimask" variable is fired before we -acknowledge all MSIs, then we will simply loose it. - -It is important to mention that this ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS -register has the following behavior: "A CPU write of 0 clears the bits -in this field. A CPU write of 1 has no effect". This is what allows us -to simply write ~msimask to acknoledge the handled MSIs. - -Notice that the same problem is present in the IPI implementation, but -it is fixed as a separate patch, so that this IPI fix can be pushed to -older stable versions as appropriate (all the way to 3.8), while the -MSI code only appeared in 3.13. - -Signed-off-by: Lior Amsalem -Signed-off-by: Thomas Petazzoni -Cc: Thomas Gleixner ---- - drivers/irqchip/irq-armada-370-xp.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/irqchip/irq-armada-370-xp.c -+++ b/drivers/irqchip/irq-armada-370-xp.c -@@ -381,7 +381,7 @@ armada_370_xp_handle_irq(struct pt_regs - ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS) - & PCI_MSI_DOORBELL_MASK; - -- writel(~PCI_MSI_DOORBELL_MASK, per_cpu_int_base + -+ writel(~msimask, per_cpu_int_base + - ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS); - - for (msinr = PCI_MSI_DOORBELL_START; diff --git a/target/linux/mvebu/patches-3.10/0088-ARM-mvebu-re-enable-PCIe-on-Armada-370-DB.patch b/target/linux/mvebu/patches-3.10/0088-ARM-mvebu-re-enable-PCIe-on-Armada-370-DB.patch deleted file mode 100644 index 3370f669d6..0000000000 --- a/target/linux/mvebu/patches-3.10/0088-ARM-mvebu-re-enable-PCIe-on-Armada-370-DB.patch +++ /dev/null @@ -1,60 +0,0 @@ -From 98e6b600e81f71f8621e316f5d46cf261a9f1da4 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Mon, 25 Nov 2013 17:26:47 +0100 -Subject: [PATCH 088/203] ARM: mvebu: re-enable PCIe on Armada 370 DB - -Commit 14fd8ed0a7fd19913 ("ARM: mvebu: Relocate Armada 370/XP PCIe -device tree nodes") relocated the PCIe controller DT nodes one level -up in the Device Tree, to reflect a more correct representation of the -hardware introduced by the mvebu-mbus Device Tree binding. - -However, while most of the boards were properly adjusted accordingly, -the Armada 370 DB board was left unchanged, and therefore, PCIe is -seen as not enabled on this board. This patch fixes that by moving the -PCIe controller node one level-up in armada-370-db.dts. - -Signed-off-by: Thomas Petazzoni -Cc: stable@vger.kernel.org ---- - arch/arm/boot/dts/armada-370-db.dts | 28 ++++++++++++++-------------- - 1 file changed, 14 insertions(+), 14 deletions(-) - ---- a/arch/arm/boot/dts/armada-370-db.dts -+++ b/arch/arm/boot/dts/armada-370-db.dts -@@ -99,22 +99,22 @@ - spi-max-frequency = <50000000>; - }; - }; -+ }; - -- pcie-controller { -+ pcie-controller { -+ status = "okay"; -+ /* -+ * The two PCIe units are accessible through -+ * both standard PCIe slots and mini-PCIe -+ * slots on the board. -+ */ -+ pcie@1,0 { -+ /* Port 0, Lane 0 */ -+ status = "okay"; -+ }; -+ pcie@2,0 { -+ /* Port 1, Lane 0 */ - status = "okay"; -- /* -- * The two PCIe units are accessible through -- * both standard PCIe slots and mini-PCIe -- * slots on the board. -- */ -- pcie@1,0 { -- /* Port 0, Lane 0 */ -- status = "okay"; -- }; -- pcie@2,0 { -- /* Port 1, Lane 0 */ -- status = "okay"; -- }; - }; - }; - }; diff --git a/target/linux/mvebu/patches-3.10/0089-ARM-mvebu-fix-gated-clock-documentation.patch b/target/linux/mvebu/patches-3.10/0089-ARM-mvebu-fix-gated-clock-documentation.patch deleted file mode 100644 index b553e8cb19..0000000000 --- a/target/linux/mvebu/patches-3.10/0089-ARM-mvebu-fix-gated-clock-documentation.patch +++ /dev/null @@ -1,43 +0,0 @@ -From 67f66e13d8a6da710d6df965021d92261083b584 Mon Sep 17 00:00:00 2001 -From: Gregory CLEMENT -Date: Wed, 25 Sep 2013 13:24:18 +0200 -Subject: [PATCH 089/203] ARM: mvebu: fix gated clock documentation - -The gated clock documentation referred only to the Orion SoC whereas -it also applied for the Armada 370/XP SoC. This commit updates the -introduction text and also the list of the compatible strings. - -Signed-off-by: Gregory CLEMENT -Signed-off-by: Jason Cooper ---- - .../devicetree/bindings/clock/mvebu-gated-clock.txt | 14 ++++++++------ - 1 file changed, 8 insertions(+), 6 deletions(-) - ---- a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt -+++ b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt -@@ -1,10 +1,10 @@ --* Gated Clock bindings for Marvell Orion SoCs -+* Gated Clock bindings for Marvell EBU SoCs - --Marvell Dove and Kirkwood allow some peripheral clocks to be gated to save --some power. The clock consumer should specify the desired clock by having --the clock ID in its "clocks" phandle cell. The clock ID is directly mapped to --the corresponding clock gating control bit in HW to ease manual clock lookup --in datasheet. -+Marvell Armada 370/XP, Dove and Kirkwood allow some peripheral clocks to be -+gated to save some power. The clock consumer should specify the desired clock -+by having the clock ID in its "clocks" phandle cell. The clock ID is directly -+mapped to the corresponding clock gating control bit in HW to ease manual clock -+lookup in datasheet. - - The following is a list of provided IDs for Armada 370: - ID Clock Peripheral -@@ -94,6 +94,8 @@ ID Clock Peripheral - - Required properties: - - compatible : shall be one of the following: -+ "marvell,armada-370-gating-clock" - for Armada 370 SoC clock gating -+ "marvell,armada-xp-gating-clock" - for Armada XP SoC clock gating - "marvell,dove-gating-clock" - for Dove SoC clock gating - "marvell,kirkwood-gating-clock" - for Kirkwood SoC clock gating - - reg : shall be the register address of the Clock Gating Control register diff --git a/target/linux/mvebu/patches-3.10/0090-mtd-add-datasheet-s-ECC-information-to-nand_chip.patch b/target/linux/mvebu/patches-3.10/0090-mtd-add-datasheet-s-ECC-information-to-nand_chip.patch deleted file mode 100644 index fcc3c929a8..0000000000 --- a/target/linux/mvebu/patches-3.10/0090-mtd-add-datasheet-s-ECC-information-to-nand_chip.patch +++ /dev/null @@ -1,64 +0,0 @@ -From 4aa571afd29f88898ef2fb954effcf53fec3264e Mon Sep 17 00:00:00 2001 -From: Huang Shijie -Date: Fri, 17 May 2013 11:17:25 +0800 -Subject: [PATCH 090/203] mtd: add datasheet's ECC information to nand_chip{} - -1.) Why add the ECC information to the nand_chip{} ? - Each nand chip has its requirement for the ECC correctability, such as - "4bit ECC for each 512Byte" or "40bit ECC for each 1024Byte". - This ECC info is very important to the nand controller, such as gpmi. - - Take the Micron MT29F64G08CBABA for example, its geometry is - 8KiB page size, 744 bytes oob size and it requires 40bit ECC per 1KiB. - If we do not provide the ECC info to the gpmi nand driver, it has to - calculate the ECC correctability itself. The gpmi driver will gets the 56bit - ECC for per 1KiB which is beyond its BCH's 40bit ecc capibility. - The gpmi will quits in this case. But in actually, the gpmi can supports - this nand chip if it can get the right ECC info. - -2.) about the new fields. - The @ecc_strength_ds stands for the ecc bits needed within the @ecc_step_ds. - The two fields should be set from the nand chip's datasheets. - - For example: - "4bit ECC for each 512Byte" could be: - @ecc_strength_ds = 4, @ecc_step_ds = 512. - "40bit ECC for each 1024Byte" could be: - @ecc_strength_ds = 40, @ecc_step_ds = 1024. - -3.) Why do not re-use the @strength and @size in the nand_ecc_ctrl{}? - The @strength and @size in nand_ecc_ctrl{} is used by the nand controller - driver, while the @ecc_strength_ds and @ecc_step_ds are get from the datasheet. - -Signed-off-by: Huang Shijie -Reviewed-and-tested-by: Brian Norris -Signed-off-by: Brian Norris -Signed-off-by: David Woodhouse ---- - include/linux/mtd/nand.h | 8 ++++++++ - 1 file changed, 8 insertions(+) - ---- a/include/linux/mtd/nand.h -+++ b/include/linux/mtd/nand.h -@@ -434,6 +434,12 @@ struct nand_buffers { - * bad block marker position; i.e., BBM == 11110111b is - * not bad when badblockbits == 7 - * @cellinfo: [INTERN] MLC/multichip data from chip ident -+ * @ecc_strength_ds: [INTERN] ECC correctability from the datasheet. -+ * Minimum amount of bit errors per @ecc_step_ds guaranteed -+ * to be correctable. If unknown, set to zero. -+ * @ecc_step_ds: [INTERN] ECC step required by the @ecc_strength_ds, -+ * also from the datasheet. It is the recommended ECC step -+ * size, if known; if unknown, set to zero. - * @numchips: [INTERN] number of physical chips - * @chipsize: [INTERN] the size of one chip for multichip arrays - * @pagemask: [INTERN] page number mask = number of (pages / chip) - 1 -@@ -510,6 +516,8 @@ struct nand_chip { - unsigned int pagebuf_bitflips; - int subpagesize; - uint8_t cellinfo; -+ uint16_t ecc_strength_ds; -+ uint16_t ecc_step_ds; - int badblockpos; - int badblockbits; - diff --git a/target/linux/mvebu/patches-3.10/0091-mtd-add-data-structures-for-Extended-Parameter-Page.patch b/target/linux/mvebu/patches-3.10/0091-mtd-add-data-structures-for-Extended-Parameter-Page.patch deleted file mode 100644 index e772d09288..0000000000 --- a/target/linux/mvebu/patches-3.10/0091-mtd-add-data-structures-for-Extended-Parameter-Page.patch +++ /dev/null @@ -1,85 +0,0 @@ -From 50a7db84f71e7c4779596fb5f8efb579a5d29f97 Mon Sep 17 00:00:00 2001 -From: Huang Shijie -Date: Fri, 17 May 2013 11:17:27 +0800 -Subject: [PATCH 091/203] mtd: add data structures for Extended Parameter Page - -Since the ONFI 2.1, the onfi spec adds the Extended Parameter Page -to store the ECC info. - -The onfi spec tells us that if the nand chip's recommended ECC codeword -size is not 512 bytes, then the @ecc_bits is 0xff. The host _SHOULD_ then -read the Extended ECC information that is part of the extended parameter -page to retrieve the ECC requirements for this device. - -This patch adds - [1] the neccessary fields for nand_onfi_params{}, - [2] and adds the onfi_ext_ecc_info{} for Extended ECC information, - [3] adds onfi_ext_section{} for extended sections, - [4] and adds onfi_ext_param_page{} for the Extended Parameter Page. - -Acked-by: Pekon Gupta -Signed-off-by: Huang Shijie -Reviewed-and-tested-by: Brian Norris -[Brian: amended for checkpatch.pl] -Signed-off-by: Brian Norris - -Signed-off-by: David Woodhouse ---- - include/linux/mtd/nand.h | 39 ++++++++++++++++++++++++++++++++++++++- - 1 file changed, 38 insertions(+), 1 deletion(-) - ---- a/include/linux/mtd/nand.h -+++ b/include/linux/mtd/nand.h -@@ -224,7 +224,10 @@ struct nand_onfi_params { - __le16 revision; - __le16 features; - __le16 opt_cmd; -- u8 reserved[22]; -+ u8 reserved0[2]; -+ __le16 ext_param_page_length; /* since ONFI 2.1 */ -+ u8 num_of_param_pages; /* since ONFI 2.1 */ -+ u8 reserved1[17]; - - /* manufacturer information block */ - char manufacturer[12]; -@@ -281,6 +284,40 @@ struct nand_onfi_params { - - #define ONFI_CRC_BASE 0x4F4E - -+/* Extended ECC information Block Definition (since ONFI 2.1) */ -+struct onfi_ext_ecc_info { -+ u8 ecc_bits; -+ u8 codeword_size; -+ __le16 bb_per_lun; -+ __le16 block_endurance; -+ u8 reserved[2]; -+} __packed; -+ -+#define ONFI_SECTION_TYPE_0 0 /* Unused section. */ -+#define ONFI_SECTION_TYPE_1 1 /* for additional sections. */ -+#define ONFI_SECTION_TYPE_2 2 /* for ECC information. */ -+struct onfi_ext_section { -+ u8 type; -+ u8 length; -+} __packed; -+ -+#define ONFI_EXT_SECTION_MAX 8 -+ -+/* Extended Parameter Page Definition (since ONFI 2.1) */ -+struct onfi_ext_param_page { -+ __le16 crc; -+ u8 sig[4]; /* 'E' 'P' 'P' 'S' */ -+ u8 reserved0[10]; -+ struct onfi_ext_section sections[ONFI_EXT_SECTION_MAX]; -+ -+ /* -+ * The actual size of the Extended Parameter Page is in -+ * @ext_param_page_length of nand_onfi_params{}. -+ * The following are the variable length sections. -+ * So we do not add any fields below. Please see the ONFI spec. -+ */ -+} __packed; -+ - /** - * struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independent devices - * @lock: protection lock diff --git a/target/linux/mvebu/patches-3.10/0092-mtd-add-a-helper-to-get-the-supported-features-for-O.patch b/target/linux/mvebu/patches-3.10/0092-mtd-add-a-helper-to-get-the-supported-features-for-O.patch deleted file mode 100644 index 7579c16855..0000000000 --- a/target/linux/mvebu/patches-3.10/0092-mtd-add-a-helper-to-get-the-supported-features-for-O.patch +++ /dev/null @@ -1,43 +0,0 @@ -From aeeb6ea6eb18c46f5776dd068989686686cda359 Mon Sep 17 00:00:00 2001 -From: Huang Shijie -Date: Fri, 17 May 2013 11:17:28 +0800 -Subject: [PATCH 092/203] mtd: add a helper to get the supported features for - ONFI nand - -add a helper to get the supported features for ONFI nand. -Also add the neccessary macros. - -Signed-off-by: Huang Shijie -Reviewed-and-tested-by: Brian Norris -Signed-off-by: Brian Norris -Signed-off-by: David Woodhouse ---- - include/linux/mtd/nand.h | 10 ++++++++++ - 1 file changed, 10 insertions(+) - ---- a/include/linux/mtd/nand.h -+++ b/include/linux/mtd/nand.h -@@ -202,6 +202,10 @@ typedef enum { - /* Keep gcc happy */ - struct nand_chip; - -+/* ONFI features */ -+#define ONFI_FEATURE_16_BIT_BUS (1 << 0) -+#define ONFI_FEATURE_EXT_PARAM_PAGE (1 << 7) -+ - /* ONFI timing mode, used in both asynchronous and synchronous mode */ - #define ONFI_TIMING_MODE_0 (1 << 0) - #define ONFI_TIMING_MODE_1 (1 << 1) -@@ -754,6 +758,12 @@ struct platform_nand_chip *get_platform_ - return chip->priv; - } - -+/* return the supported features. */ -+static inline int onfi_feature(struct nand_chip *chip) -+{ -+ return chip->onfi_version ? le16_to_cpu(chip->onfi_params.features) : 0; -+} -+ - /* return the supported asynchronous timing mode. */ - static inline int onfi_get_async_timing_mode(struct nand_chip *chip) - { diff --git a/target/linux/mvebu/patches-3.10/0093-mtd-get-the-ECC-info-from-the-parameter-page-for-ONF.patch b/target/linux/mvebu/patches-3.10/0093-mtd-get-the-ECC-info-from-the-parameter-page-for-ONF.patch deleted file mode 100644 index 6c70fda3cb..0000000000 --- a/target/linux/mvebu/patches-3.10/0093-mtd-get-the-ECC-info-from-the-parameter-page-for-ONF.patch +++ /dev/null @@ -1,31 +0,0 @@ -From ceef2075f3aa430da137e3629b0280a46d420ccd Mon Sep 17 00:00:00 2001 -From: Huang Shijie -Date: Fri, 17 May 2013 11:17:26 +0800 -Subject: [PATCH 093/203] mtd: get the ECC info from the parameter page for - ONFI nand - -From the ONFI spec, we can just get the ECC info from the @ecc_bits field of -the parameter page. - -Signed-off-by: Huang Shijie -Reviewed-and-tested-by: Brian Norris -Signed-off-by: Brian Norris -Signed-off-by: David Woodhouse ---- - drivers/mtd/nand/nand_base.c | 5 +++++ - 1 file changed, 5 insertions(+) - ---- a/drivers/mtd/nand/nand_base.c -+++ b/drivers/mtd/nand/nand_base.c -@@ -2924,6 +2924,11 @@ static int nand_flash_detect_onfi(struct - if (le16_to_cpu(p->features) & 1) - *busw = NAND_BUSWIDTH_16; - -+ if (p->ecc_bits != 0xff) { -+ chip->ecc_strength_ds = p->ecc_bits; -+ chip->ecc_step_ds = 512; -+ } -+ - pr_info("ONFI flash detected\n"); - return 1; - } diff --git a/target/linux/mvebu/patches-3.10/0094-mtd-get-the-ECC-info-from-the-Extended-Parameter-Pag.patch b/target/linux/mvebu/patches-3.10/0094-mtd-get-the-ECC-info-from-the-Extended-Parameter-Pag.patch deleted file mode 100644 index b3969e1159..0000000000 --- a/target/linux/mvebu/patches-3.10/0094-mtd-get-the-ECC-info-from-the-Extended-Parameter-Pag.patch +++ /dev/null @@ -1,131 +0,0 @@ -From f617846b1e20a2ba59cdd9435715339eaed1e251 Mon Sep 17 00:00:00 2001 -From: Huang Shijie -Date: Wed, 22 May 2013 10:28:27 +0800 -Subject: [PATCH 094/203] mtd: get the ECC info from the Extended Parameter - Page - -Since the ONFI 2.1, the onfi spec adds the Extended Parameter Page -to store the ECC info. - -The onfi spec tells us that if the nand chip's recommended ECC codeword -size is not 512 bytes, then the @ecc_bits is 0xff. The host _SHOULD_ then -read the Extended ECC information that is part of the extended parameter -page to retrieve the ECC requirements for this device. - -This patch implement the reading of the Extended Parameter Page, and parses -the sections for ECC type, and get the ECC info from the ECC section. - -Tested this patch with Micron MT29F64G08CBABAWP. - -Acked-by: Pekon Gupta -Signed-off-by: Huang Shijie -Reviewed-and-tested-by: Brian Norris -Signed-off-by: Brian Norris -Signed-off-by: David Woodhouse ---- - drivers/mtd/nand/nand_base.c | 87 ++++++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 87 insertions(+) - ---- a/drivers/mtd/nand/nand_base.c -+++ b/drivers/mtd/nand/nand_base.c -@@ -2848,6 +2848,78 @@ static u16 onfi_crc16(u16 crc, u8 const - return crc; - } - -+/* Parse the Extended Parameter Page. */ -+static int nand_flash_detect_ext_param_page(struct mtd_info *mtd, -+ struct nand_chip *chip, struct nand_onfi_params *p) -+{ -+ struct onfi_ext_param_page *ep; -+ struct onfi_ext_section *s; -+ struct onfi_ext_ecc_info *ecc; -+ uint8_t *cursor; -+ int ret = -EINVAL; -+ int len; -+ int i; -+ -+ len = le16_to_cpu(p->ext_param_page_length) * 16; -+ ep = kmalloc(len, GFP_KERNEL); -+ if (!ep) { -+ ret = -ENOMEM; -+ goto ext_out; -+ } -+ -+ /* Send our own NAND_CMD_PARAM. */ -+ chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1); -+ -+ /* Use the Change Read Column command to skip the ONFI param pages. */ -+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, -+ sizeof(*p) * p->num_of_param_pages , -1); -+ -+ /* Read out the Extended Parameter Page. */ -+ chip->read_buf(mtd, (uint8_t *)ep, len); -+ if ((onfi_crc16(ONFI_CRC_BASE, ((uint8_t *)ep) + 2, len - 2) -+ != le16_to_cpu(ep->crc))) { -+ pr_debug("fail in the CRC.\n"); -+ goto ext_out; -+ } -+ -+ /* -+ * Check the signature. -+ * Do not strictly follow the ONFI spec, maybe changed in future. -+ */ -+ if (strncmp(ep->sig, "EPPS", 4)) { -+ pr_debug("The signature is invalid.\n"); -+ goto ext_out; -+ } -+ -+ /* find the ECC section. */ -+ cursor = (uint8_t *)(ep + 1); -+ for (i = 0; i < ONFI_EXT_SECTION_MAX; i++) { -+ s = ep->sections + i; -+ if (s->type == ONFI_SECTION_TYPE_2) -+ break; -+ cursor += s->length * 16; -+ } -+ if (i == ONFI_EXT_SECTION_MAX) { -+ pr_debug("We can not find the ECC section.\n"); -+ goto ext_out; -+ } -+ -+ /* get the info we want. */ -+ ecc = (struct onfi_ext_ecc_info *)cursor; -+ -+ if (ecc->codeword_size) { -+ chip->ecc_strength_ds = ecc->ecc_bits; -+ chip->ecc_step_ds = 1 << ecc->codeword_size; -+ } -+ -+ pr_info("ONFI extended param page detected.\n"); -+ return 0; -+ -+ext_out: -+ kfree(ep); -+ return ret; -+} -+ - /* - * Check if the NAND chip is ONFI compliant, returns 1 if it is, 0 otherwise. - */ -@@ -2927,6 +2999,21 @@ static int nand_flash_detect_onfi(struct - if (p->ecc_bits != 0xff) { - chip->ecc_strength_ds = p->ecc_bits; - chip->ecc_step_ds = 512; -+ } else if (chip->onfi_version >= 21 && -+ (onfi_feature(chip) & ONFI_FEATURE_EXT_PARAM_PAGE)) { -+ -+ /* -+ * The nand_flash_detect_ext_param_page() uses the -+ * Change Read Column command which maybe not supported -+ * by the chip->cmdfunc. So try to update the chip->cmdfunc -+ * now. We do not replace user supplied command function. -+ */ -+ if (mtd->writesize > 512 && chip->cmdfunc == nand_command) -+ chip->cmdfunc = nand_command_lp; -+ -+ /* The Extended Parameter Page is supported since ONFI 2.1. */ -+ if (nand_flash_detect_ext_param_page(mtd, chip, p)) -+ pr_info("Failed to detect the extended param page.\n"); - } - - pr_info("ONFI flash detected\n"); diff --git a/target/linux/mvebu/patches-3.10/0095-mtd-nand-fix-memory-leak-in-ONFI-extended-parameter-.patch b/target/linux/mvebu/patches-3.10/0095-mtd-nand-fix-memory-leak-in-ONFI-extended-parameter-.patch deleted file mode 100644 index 5cb74f974a..0000000000 --- a/target/linux/mvebu/patches-3.10/0095-mtd-nand-fix-memory-leak-in-ONFI-extended-parameter-.patch +++ /dev/null @@ -1,51 +0,0 @@ -From 5d15281ca712cb873835e301937f3a8342e88d4b Mon Sep 17 00:00:00 2001 -From: Brian Norris -Date: Mon, 16 Sep 2013 17:59:20 -0700 -Subject: [PATCH 095/203] mtd: nand: fix memory leak in ONFI extended parameter - page - -This fixes a memory leak in the ONFI support code for detecting the -required ECC levels from this commit: - - commit 6dcbe0cdd83fb5f77be4f44c9e06c535281c375a - Author: Huang Shijie - Date: Wed May 22 10:28:27 2013 +0800 - - mtd: get the ECC info from the Extended Parameter Page - -In the success case, we never freed the 'ep' buffer. - -Also, this fixes an oversight in the same commit where we (harmlessly) -freed the NULL pointer. - -Signed-off-by: Brian Norris -Acked-by: Huang Shijie -Signed-off-by: David Woodhouse ---- - drivers/mtd/nand/nand_base.c | 8 +++----- - 1 file changed, 3 insertions(+), 5 deletions(-) - ---- a/drivers/mtd/nand/nand_base.c -+++ b/drivers/mtd/nand/nand_base.c -@@ -2862,10 +2862,8 @@ static int nand_flash_detect_ext_param_p - - len = le16_to_cpu(p->ext_param_page_length) * 16; - ep = kmalloc(len, GFP_KERNEL); -- if (!ep) { -- ret = -ENOMEM; -- goto ext_out; -- } -+ if (!ep) -+ return -ENOMEM; - - /* Send our own NAND_CMD_PARAM. */ - chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1); -@@ -2913,7 +2911,7 @@ static int nand_flash_detect_ext_param_p - } - - pr_info("ONFI extended param page detected.\n"); -- return 0; -+ ret = 0; - - ext_out: - kfree(ep); diff --git a/target/linux/mvebu/patches-3.10/0096-clk-mvebu-Add-Core-Divider-clock.patch b/target/linux/mvebu/patches-3.10/0096-clk-mvebu-Add-Core-Divider-clock.patch deleted file mode 100644 index 968877cab2..0000000000 --- a/target/linux/mvebu/patches-3.10/0096-clk-mvebu-Add-Core-Divider-clock.patch +++ /dev/null @@ -1,273 +0,0 @@ -From ac8294dfb4085f3193bec27673062e5ad63d770a Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Thu, 26 Sep 2013 16:35:27 -0300 -Subject: [PATCH 096/203] clk: mvebu: Add Core Divider clock - -This commit introduces a new group of clocks present in Armada 370/XP -SoCs (called "Core Divider" clocks) and add a provider for them. -The only clock supported for now is the NAND clock (ndclk), but the -infrastructure to add the rest is already set. - -Reviewed-by: Gregory CLEMENT -Signed-off-by: Ezequiel Garcia -Signed-off-by: Mike Turquette ---- - arch/arm/mach-mvebu/Kconfig | 1 + - drivers/clk/mvebu/Kconfig | 3 + - drivers/clk/mvebu/Makefile | 1 + - drivers/clk/mvebu/clk-corediv.c | 223 ++++++++++++++++++++++++++++++++++++++++ - 4 files changed, 228 insertions(+) - create mode 100644 drivers/clk/mvebu/clk-corediv.c - ---- a/arch/arm/mach-mvebu/Kconfig -+++ b/arch/arm/mach-mvebu/Kconfig -@@ -13,6 +13,7 @@ config ARCH_MVEBU - select MVEBU_CLK_CORE - select MVEBU_CLK_CPU - select MVEBU_CLK_GATING -+ select MVEBU_CLK_COREDIV - select MVEBU_MBUS - select ZONE_DMA if ARM_LPAE - select ARCH_REQUIRE_GPIOLIB ---- a/drivers/clk/mvebu/Kconfig -+++ b/drivers/clk/mvebu/Kconfig -@@ -6,3 +6,6 @@ config MVEBU_CLK_CPU - - config MVEBU_CLK_GATING - bool -+ -+config MVEBU_CLK_COREDIV -+ bool ---- a/drivers/clk/mvebu/Makefile -+++ b/drivers/clk/mvebu/Makefile -@@ -1,3 +1,4 @@ - obj-$(CONFIG_MVEBU_CLK_CORE) += clk.o clk-core.o - obj-$(CONFIG_MVEBU_CLK_CPU) += clk-cpu.o - obj-$(CONFIG_MVEBU_CLK_GATING) += clk-gating-ctrl.o -+obj-$(CONFIG_MVEBU_CLK_COREDIV) += clk-corediv.o ---- /dev/null -+++ b/drivers/clk/mvebu/clk-corediv.c -@@ -0,0 +1,223 @@ -+/* -+ * MVEBU Core divider clock -+ * -+ * Copyright (C) 2013 Marvell -+ * -+ * Ezequiel Garcia -+ * -+ * This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without any -+ * warranty of any kind, whether express or implied. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define CORE_CLK_DIV_RATIO_MASK 0xff -+#define CORE_CLK_DIV_RATIO_RELOAD BIT(8) -+#define CORE_CLK_DIV_ENABLE_OFFSET 24 -+#define CORE_CLK_DIV_RATIO_OFFSET 0x8 -+ -+struct clk_corediv_desc { -+ unsigned int mask; -+ unsigned int offset; -+ unsigned int fieldbit; -+}; -+ -+struct clk_corediv { -+ struct clk_hw hw; -+ void __iomem *reg; -+ struct clk_corediv_desc desc; -+ spinlock_t lock; -+}; -+ -+static struct clk_onecell_data clk_data; -+ -+static const struct clk_corediv_desc mvebu_corediv_desc[] __initconst = { -+ { .mask = 0x3f, .offset = 8, .fieldbit = 1 }, /* NAND clock */ -+}; -+ -+#define to_corediv_clk(p) container_of(p, struct clk_corediv, hw) -+ -+static int clk_corediv_is_enabled(struct clk_hw *hwclk) -+{ -+ struct clk_corediv *corediv = to_corediv_clk(hwclk); -+ struct clk_corediv_desc *desc = &corediv->desc; -+ u32 enable_mask = BIT(desc->fieldbit) << CORE_CLK_DIV_ENABLE_OFFSET; -+ -+ return !!(readl(corediv->reg) & enable_mask); -+} -+ -+static int clk_corediv_enable(struct clk_hw *hwclk) -+{ -+ struct clk_corediv *corediv = to_corediv_clk(hwclk); -+ struct clk_corediv_desc *desc = &corediv->desc; -+ unsigned long flags = 0; -+ u32 reg; -+ -+ spin_lock_irqsave(&corediv->lock, flags); -+ -+ reg = readl(corediv->reg); -+ reg |= (BIT(desc->fieldbit) << CORE_CLK_DIV_ENABLE_OFFSET); -+ writel(reg, corediv->reg); -+ -+ spin_unlock_irqrestore(&corediv->lock, flags); -+ -+ return 0; -+} -+ -+static void clk_corediv_disable(struct clk_hw *hwclk) -+{ -+ struct clk_corediv *corediv = to_corediv_clk(hwclk); -+ struct clk_corediv_desc *desc = &corediv->desc; -+ unsigned long flags = 0; -+ u32 reg; -+ -+ spin_lock_irqsave(&corediv->lock, flags); -+ -+ reg = readl(corediv->reg); -+ reg &= ~(BIT(desc->fieldbit) << CORE_CLK_DIV_ENABLE_OFFSET); -+ writel(reg, corediv->reg); -+ -+ spin_unlock_irqrestore(&corediv->lock, flags); -+} -+ -+static unsigned long clk_corediv_recalc_rate(struct clk_hw *hwclk, -+ unsigned long parent_rate) -+{ -+ struct clk_corediv *corediv = to_corediv_clk(hwclk); -+ struct clk_corediv_desc *desc = &corediv->desc; -+ u32 reg, div; -+ -+ reg = readl(corediv->reg + CORE_CLK_DIV_RATIO_OFFSET); -+ div = (reg >> desc->offset) & desc->mask; -+ return parent_rate / div; -+} -+ -+static long clk_corediv_round_rate(struct clk_hw *hwclk, unsigned long rate, -+ unsigned long *parent_rate) -+{ -+ /* Valid ratio are 1:4, 1:5, 1:6 and 1:8 */ -+ u32 div; -+ -+ div = *parent_rate / rate; -+ if (div < 4) -+ div = 4; -+ else if (div > 6) -+ div = 8; -+ -+ return *parent_rate / div; -+} -+ -+static int clk_corediv_set_rate(struct clk_hw *hwclk, unsigned long rate, -+ unsigned long parent_rate) -+{ -+ struct clk_corediv *corediv = to_corediv_clk(hwclk); -+ struct clk_corediv_desc *desc = &corediv->desc; -+ unsigned long flags = 0; -+ u32 reg, div; -+ -+ div = parent_rate / rate; -+ -+ spin_lock_irqsave(&corediv->lock, flags); -+ -+ /* Write new divider to the divider ratio register */ -+ reg = readl(corediv->reg + CORE_CLK_DIV_RATIO_OFFSET); -+ reg &= ~(desc->mask << desc->offset); -+ reg |= (div & desc->mask) << desc->offset; -+ writel(reg, corediv->reg + CORE_CLK_DIV_RATIO_OFFSET); -+ -+ /* Set reload-force for this clock */ -+ reg = readl(corediv->reg) | BIT(desc->fieldbit); -+ writel(reg, corediv->reg); -+ -+ /* Now trigger the clock update */ -+ reg = readl(corediv->reg) | CORE_CLK_DIV_RATIO_RELOAD; -+ writel(reg, corediv->reg); -+ -+ /* -+ * Wait for clocks to settle down, and then clear all the -+ * ratios request and the reload request. -+ */ -+ udelay(1000); -+ reg &= ~(CORE_CLK_DIV_RATIO_MASK | CORE_CLK_DIV_RATIO_RELOAD); -+ writel(reg, corediv->reg); -+ udelay(1000); -+ -+ spin_unlock_irqrestore(&corediv->lock, flags); -+ -+ return 0; -+} -+ -+static const struct clk_ops corediv_ops = { -+ .enable = clk_corediv_enable, -+ .disable = clk_corediv_disable, -+ .is_enabled = clk_corediv_is_enabled, -+ .recalc_rate = clk_corediv_recalc_rate, -+ .round_rate = clk_corediv_round_rate, -+ .set_rate = clk_corediv_set_rate, -+}; -+ -+static void __init mvebu_corediv_clk_init(struct device_node *node) -+{ -+ struct clk_init_data init; -+ struct clk_corediv *corediv; -+ struct clk **clks; -+ void __iomem *base; -+ const char *parent_name; -+ const char *clk_name; -+ int i; -+ -+ base = of_iomap(node, 0); -+ if (WARN_ON(!base)) -+ return; -+ -+ parent_name = of_clk_get_parent_name(node, 0); -+ -+ clk_data.clk_num = ARRAY_SIZE(mvebu_corediv_desc); -+ -+ /* clks holds the clock array */ -+ clks = kcalloc(clk_data.clk_num, sizeof(struct clk *), -+ GFP_KERNEL); -+ if (WARN_ON(!clks)) -+ goto err_unmap; -+ /* corediv holds the clock specific array */ -+ corediv = kcalloc(clk_data.clk_num, sizeof(struct clk_corediv), -+ GFP_KERNEL); -+ if (WARN_ON(!corediv)) -+ goto err_free_clks; -+ -+ spin_lock_init(&corediv->lock); -+ -+ for (i = 0; i < clk_data.clk_num; i++) { -+ of_property_read_string_index(node, "clock-output-names", -+ i, &clk_name); -+ init.num_parents = 1; -+ init.parent_names = &parent_name; -+ init.name = clk_name; -+ init.ops = &corediv_ops; -+ init.flags = 0; -+ -+ corediv[i].desc = mvebu_corediv_desc[i]; -+ corediv[i].reg = base; -+ corediv[i].hw.init = &init; -+ -+ clks[i] = clk_register(NULL, &corediv[i].hw); -+ WARN_ON(IS_ERR(clks[i])); -+ } -+ -+ clk_data.clks = clks; -+ of_clk_add_provider(node, of_clk_src_onecell_get, &clk_data); -+ return; -+ -+err_free_clks: -+ kfree(clks); -+err_unmap: -+ iounmap(base); -+} -+CLK_OF_DECLARE(mvebu_corediv_clk, "marvell,armada-370-corediv-clock", -+ mvebu_corediv_clk_init); diff --git a/target/linux/mvebu/patches-3.10/0097-ARM-mvebu-Add-a-2-GHz-fixed-clock-Armada-370-XP.patch b/target/linux/mvebu/patches-3.10/0097-ARM-mvebu-Add-a-2-GHz-fixed-clock-Armada-370-XP.patch deleted file mode 100644 index 861dcb9d0b..0000000000 --- a/target/linux/mvebu/patches-3.10/0097-ARM-mvebu-Add-a-2-GHz-fixed-clock-Armada-370-XP.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 455ad812cb2ec97339f780e2a79169620f1e7485 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Fri, 18 Oct 2013 20:02:30 -0300 -Subject: [PATCH 097/203] ARM: mvebu: Add a 2 GHz fixed-clock Armada 370/XP - -Armada 370/XP SoCs have a 2 GHz fixed PLL that is used to feed -other clocks. This commit adds a DT representation of this clock -through a fixed-clock compatible node. - -Reviewed-by: Gregory CLEMENT -Signed-off-by: Ezequiel Garcia -Signed-off-by: Jason Cooper ---- - arch/arm/boot/dts/armada-370-xp.dtsi | 9 +++++++++ - 1 file changed, 9 insertions(+) - ---- a/arch/arm/boot/dts/armada-370-xp.dtsi -+++ b/arch/arm/boot/dts/armada-370-xp.dtsi -@@ -251,4 +251,13 @@ - - }; - }; -+ -+ clocks { -+ /* 2 GHz fixed main PLL */ -+ mainpll: mainpll { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <2000000000>; -+ }; -+ }; - }; diff --git a/target/linux/mvebu/patches-3.10/0098-ARM-mvebu-Add-the-core-divider-clock-to-Armada-370-X.patch b/target/linux/mvebu/patches-3.10/0098-ARM-mvebu-Add-the-core-divider-clock-to-Armada-370-X.patch deleted file mode 100644 index c25e5de456..0000000000 --- a/target/linux/mvebu/patches-3.10/0098-ARM-mvebu-Add-the-core-divider-clock-to-Armada-370-X.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 408b807592d9cdbc1a69b119f4a862b2ab1e4d87 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Fri, 18 Oct 2013 20:02:31 -0300 -Subject: [PATCH 098/203] ARM: mvebu: Add the core-divider clock to Armada - 370/XP - -The Armada 370/XP SoC has a clock provider called "Core Divider", -that is derived from a fixed 2 GHz PLL clock. - -Reviewed-by: Gregory CLEMENT -Signed-off-by: Ezequiel Garcia -Signed-off-by: Jason Cooper ---- - arch/arm/boot/dts/armada-370-xp.dtsi | 8 ++++++++ - 1 file changed, 8 insertions(+) - ---- a/arch/arm/boot/dts/armada-370-xp.dtsi -+++ b/arch/arm/boot/dts/armada-370-xp.dtsi -@@ -134,6 +134,14 @@ - status = "disabled"; - }; - -+ coredivclk: corediv-clock@18740 { -+ compatible = "marvell,armada-370-corediv-clock"; -+ reg = <0x18740 0xc>; -+ #clock-cells = <1>; -+ clocks = <&mainpll>; -+ clock-output-names = "nand"; -+ }; -+ - timer@20300 { - compatible = "marvell,armada-370-xp-timer"; - reg = <0x20300 0x30>, <0x21040 0x30>; diff --git a/target/linux/mvebu/patches-3.10/0099-ARM-mvebu-Add-support-for-NAND-controller-in-Armada-.patch b/target/linux/mvebu/patches-3.10/0099-ARM-mvebu-Add-support-for-NAND-controller-in-Armada-.patch deleted file mode 100644 index 36bf58bc9b..0000000000 --- a/target/linux/mvebu/patches-3.10/0099-ARM-mvebu-Add-support-for-NAND-controller-in-Armada-.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 64356fe97302ad842d9871a5a4411d8b41127f59 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Thu, 7 Nov 2013 12:17:33 -0300 -Subject: [PATCH 099/203] ARM: mvebu: Add support for NAND controller in Armada - 370/XP - -The Armada 370 and Armada XP SoC have a NAND controller (aka NFCv2). -This commit adds support for it in Armada 370 and Armada XP SoC -common devicetree. - -Signed-off-by: Ezequiel Garcia -Signed-off-by: Jason Cooper ---- - arch/arm/boot/dts/armada-370-xp.dtsi | 9 +++++++++ - 1 file changed, 9 insertions(+) - ---- a/arch/arm/boot/dts/armada-370-xp.dtsi -+++ b/arch/arm/boot/dts/armada-370-xp.dtsi -@@ -257,6 +257,15 @@ - status = "disabled"; - }; - -+ nand@d0000 { -+ compatible = "marvell,armada370-nand"; -+ reg = <0xd0000 0x54>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ interrupts = <113>; -+ clocks = <&coredivclk 0>; -+ status = "disabled"; -+ }; - }; - }; - diff --git a/target/linux/mvebu/patches-3.10/0100-ARM-mvebu-Enable-NAND-controller-in-Armada-XP-GP-boa.patch b/target/linux/mvebu/patches-3.10/0100-ARM-mvebu-Enable-NAND-controller-in-Armada-XP-GP-boa.patch deleted file mode 100644 index 1b56424982..0000000000 --- a/target/linux/mvebu/patches-3.10/0100-ARM-mvebu-Enable-NAND-controller-in-Armada-XP-GP-boa.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 9226a0bb330bb83df9a465ba418efd3277cd00d3 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Thu, 7 Nov 2013 12:17:34 -0300 -Subject: [PATCH 100/203] ARM: mvebu: Enable NAND controller in Armada XP GP - board - -The Armada XP GP board has a NAND flash, so enable it in the devicetree. - -In order to skip the driver's custom device detection and use only ONFI -detection, the "marvell,keep-config" parameter is used. -This is needed because we haven't support for setting the timings -parameters yet and must rely in bootloader's. - -Signed-off-by: Ezequiel Garcia -Signed-off-by: Jason Cooper ---- - arch/arm/boot/dts/armada-xp-gp.dts | 8 ++++++++ - 1 file changed, 8 insertions(+) - ---- a/arch/arm/boot/dts/armada-xp-gp.dts -+++ b/arch/arm/boot/dts/armada-xp-gp.dts -@@ -175,6 +175,14 @@ - spi-max-frequency = <108000000>; - }; - }; -+ -+ nand@d0000 { -+ status = "okay"; -+ num-cs = <1>; -+ marvell,nand-keep-config; -+ marvell,nand-enable-arbiter; -+ nand-on-flash-bbt; -+ }; - }; - }; - }; diff --git a/target/linux/mvebu/patches-3.10/0101-mtd-nand-pxa3xx-Use-devm_kzalloc.patch b/target/linux/mvebu/patches-3.10/0101-mtd-nand-pxa3xx-Use-devm_kzalloc.patch deleted file mode 100644 index 4ff71f0fb2..0000000000 --- a/target/linux/mvebu/patches-3.10/0101-mtd-nand-pxa3xx-Use-devm_kzalloc.patch +++ /dev/null @@ -1,60 +0,0 @@ -From 271ef48cf11b86ab666582051fed3bdb13681e64 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Wed, 17 Apr 2013 13:38:09 -0300 -Subject: [PATCH 101/203] mtd: nand: pxa3xx: Use devm_kzalloc - -Replace regular kzalloc with managed devm_kzalloc -which simplifies the error path. - -Signed-off-by: Ezequiel Garcia -Signed-off-by: Artem Bityutskiy -Signed-off-by: David Woodhouse ---- - drivers/mtd/nand/pxa3xx_nand.c | 14 ++++---------- - 1 file changed, 4 insertions(+), 10 deletions(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -1035,12 +1035,10 @@ static int alloc_nand_resource(struct pl - int ret, irq, cs; - - pdata = pdev->dev.platform_data; -- info = kzalloc(sizeof(*info) + (sizeof(*mtd) + -- sizeof(*host)) * pdata->num_cs, GFP_KERNEL); -- if (!info) { -- dev_err(&pdev->dev, "failed to allocate memory\n"); -+ info = devm_kzalloc(&pdev->dev, sizeof(*info) + (sizeof(*mtd) + -+ sizeof(*host)) * pdata->num_cs, GFP_KERNEL); -+ if (!info) - return -ENOMEM; -- } - - info->pdev = pdev; - for (cs = 0; cs < pdata->num_cs; cs++) { -@@ -1072,8 +1070,7 @@ static int alloc_nand_resource(struct pl - info->clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(info->clk)) { - dev_err(&pdev->dev, "failed to get nand clock\n"); -- ret = PTR_ERR(info->clk); -- goto fail_free_mtd; -+ return PTR_ERR(info->clk); - } - clk_enable(info->clk); - -@@ -1165,8 +1162,6 @@ fail_free_res: - fail_put_clk: - clk_disable(info->clk); - clk_put(info->clk); --fail_free_mtd: -- kfree(info); - return ret; - } - -@@ -1202,7 +1197,6 @@ static int pxa3xx_nand_remove(struct pla - - for (cs = 0; cs < pdata->num_cs; cs++) - nand_release(info->host[cs]->mtd); -- kfree(info); - return 0; - } - diff --git a/target/linux/mvebu/patches-3.10/0102-mtd-nand-pxa3xx-Use-devm_ioremap_resource.patch b/target/linux/mvebu/patches-3.10/0102-mtd-nand-pxa3xx-Use-devm_ioremap_resource.patch deleted file mode 100644 index eec80792d2..0000000000 --- a/target/linux/mvebu/patches-3.10/0102-mtd-nand-pxa3xx-Use-devm_ioremap_resource.patch +++ /dev/null @@ -1,82 +0,0 @@ -From 5c461327aca8975276d2480ddf02b6c7f0a29548 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Wed, 17 Apr 2013 13:38:10 -0300 -Subject: [PATCH 102/203] mtd: nand: pxa3xx: Use devm_ioremap_resource - -Using the new devm_ioremap_resource() we can greatly -simplify resource handling. - -Signed-off-by: Ezequiel Garcia -Signed-off-by: Artem Bityutskiy -Signed-off-by: David Woodhouse ---- - drivers/mtd/nand/pxa3xx_nand.c | 31 ++++--------------------------- - 1 file changed, 4 insertions(+), 27 deletions(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -1108,30 +1108,16 @@ static int alloc_nand_resource(struct pl - } - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); -- if (r == NULL) { -- dev_err(&pdev->dev, "no IO memory resource defined\n"); -- ret = -ENODEV; -+ info->mmio_base = devm_ioremap_resource(&pdev->dev, r); -+ if (IS_ERR(info->mmio_base)) { -+ ret = PTR_ERR(info->mmio_base); - goto fail_put_clk; - } -- -- r = request_mem_region(r->start, resource_size(r), pdev->name); -- if (r == NULL) { -- dev_err(&pdev->dev, "failed to request memory resource\n"); -- ret = -EBUSY; -- goto fail_put_clk; -- } -- -- info->mmio_base = ioremap(r->start, resource_size(r)); -- if (info->mmio_base == NULL) { -- dev_err(&pdev->dev, "ioremap() failed\n"); -- ret = -ENODEV; -- goto fail_free_res; -- } - info->mmio_phys = r->start; - - ret = pxa3xx_nand_init_buff(info); - if (ret) -- goto fail_free_io; -+ goto fail_put_clk; - - /* initialize all interrupts to be disabled */ - disable_int(info, NDSR_MASK); -@@ -1155,10 +1141,6 @@ fail_free_buf: - info->data_buff, info->data_buff_phys); - } else - kfree(info->data_buff); --fail_free_io: -- iounmap(info->mmio_base); --fail_free_res: -- release_mem_region(r->start, resource_size(r)); - fail_put_clk: - clk_disable(info->clk); - clk_put(info->clk); -@@ -1169,7 +1151,6 @@ static int pxa3xx_nand_remove(struct pla - { - struct pxa3xx_nand_info *info = platform_get_drvdata(pdev); - struct pxa3xx_nand_platform_data *pdata; -- struct resource *r; - int irq, cs; - - if (!info) -@@ -1188,10 +1169,6 @@ static int pxa3xx_nand_remove(struct pla - } else - kfree(info->data_buff); - -- iounmap(info->mmio_base); -- r = platform_get_resource(pdev, IORESOURCE_MEM, 0); -- release_mem_region(r->start, resource_size(r)); -- - clk_disable(info->clk); - clk_put(info->clk); - diff --git a/target/linux/mvebu/patches-3.10/0103-mtd-nand-pxa3xx-Use-devm_clk_get.patch b/target/linux/mvebu/patches-3.10/0103-mtd-nand-pxa3xx-Use-devm_clk_get.patch deleted file mode 100644 index 8f9692a44e..0000000000 --- a/target/linux/mvebu/patches-3.10/0103-mtd-nand-pxa3xx-Use-devm_clk_get.patch +++ /dev/null @@ -1,87 +0,0 @@ -From 4ff9eea8b6841bb8be7becba9713a0ce7c82da9d Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Wed, 17 Apr 2013 13:38:11 -0300 -Subject: [PATCH 103/203] mtd: nand: pxa3xx: Use devm_clk_get - -Replacing clk_get by managed devm_clk_get, the error path -can be greatly simplified. - -Signed-off-by: Ezequiel Garcia -Signed-off-by: Artem Bityutskiy -Signed-off-by: David Woodhouse ---- - drivers/mtd/nand/pxa3xx_nand.c | 16 +++++++--------- - 1 file changed, 7 insertions(+), 9 deletions(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -1067,7 +1067,7 @@ static int alloc_nand_resource(struct pl - - spin_lock_init(&chip->controller->lock); - init_waitqueue_head(&chip->controller->wq); -- info->clk = clk_get(&pdev->dev, NULL); -+ info->clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(info->clk)) { - dev_err(&pdev->dev, "failed to get nand clock\n"); - return PTR_ERR(info->clk); -@@ -1087,7 +1087,7 @@ static int alloc_nand_resource(struct pl - if (r == NULL) { - dev_err(&pdev->dev, "no resource defined for data DMA\n"); - ret = -ENXIO; -- goto fail_put_clk; -+ goto fail_disable_clk; - } - info->drcmr_dat = r->start; - -@@ -1095,7 +1095,7 @@ static int alloc_nand_resource(struct pl - if (r == NULL) { - dev_err(&pdev->dev, "no resource defined for command DMA\n"); - ret = -ENXIO; -- goto fail_put_clk; -+ goto fail_disable_clk; - } - info->drcmr_cmd = r->start; - } -@@ -1104,20 +1104,20 @@ static int alloc_nand_resource(struct pl - if (irq < 0) { - dev_err(&pdev->dev, "no IRQ resource defined\n"); - ret = -ENXIO; -- goto fail_put_clk; -+ goto fail_disable_clk; - } - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - info->mmio_base = devm_ioremap_resource(&pdev->dev, r); - if (IS_ERR(info->mmio_base)) { - ret = PTR_ERR(info->mmio_base); -- goto fail_put_clk; -+ goto fail_disable_clk; - } - info->mmio_phys = r->start; - - ret = pxa3xx_nand_init_buff(info); - if (ret) -- goto fail_put_clk; -+ goto fail_disable_clk; - - /* initialize all interrupts to be disabled */ - disable_int(info, NDSR_MASK); -@@ -1141,9 +1141,8 @@ fail_free_buf: - info->data_buff, info->data_buff_phys); - } else - kfree(info->data_buff); --fail_put_clk: -+fail_disable_clk: - clk_disable(info->clk); -- clk_put(info->clk); - return ret; - } - -@@ -1170,7 +1169,6 @@ static int pxa3xx_nand_remove(struct pla - kfree(info->data_buff); - - clk_disable(info->clk); -- clk_put(info->clk); - - for (cs = 0; cs < pdata->num_cs; cs++) - nand_release(info->host[cs]->mtd); diff --git a/target/linux/mvebu/patches-3.10/0104-mtd-nand-pxa3xx-Use-clk_prepare_enable-and-clk_disab.patch b/target/linux/mvebu/patches-3.10/0104-mtd-nand-pxa3xx-Use-clk_prepare_enable-and-clk_disab.patch deleted file mode 100644 index 80d3588751..0000000000 --- a/target/linux/mvebu/patches-3.10/0104-mtd-nand-pxa3xx-Use-clk_prepare_enable-and-clk_disab.patch +++ /dev/null @@ -1,45 +0,0 @@ -From e9274ba8dd0c93f12c0fd5896e11f754aa700baf Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Wed, 17 Apr 2013 13:38:12 -0300 -Subject: [PATCH 104/203] mtd: nand: pxa3xx: Use clk_prepare_enable and - clk_disable_unprepare - -This patch converts the module to use clk_prepare_enable and -clk_disable_unprepare variants as required by common clock framework. - -Signed-off-by: Ezequiel Garcia -Signed-off-by: Artem Bityutskiy -Signed-off-by: David Woodhouse ---- - drivers/mtd/nand/pxa3xx_nand.c | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -1072,7 +1072,7 @@ static int alloc_nand_resource(struct pl - dev_err(&pdev->dev, "failed to get nand clock\n"); - return PTR_ERR(info->clk); - } -- clk_enable(info->clk); -+ clk_prepare_enable(info->clk); - - /* - * This is a dirty hack to make this driver work from devicetree -@@ -1142,7 +1142,7 @@ fail_free_buf: - } else - kfree(info->data_buff); - fail_disable_clk: -- clk_disable(info->clk); -+ clk_disable_unprepare(info->clk); - return ret; - } - -@@ -1168,7 +1168,7 @@ static int pxa3xx_nand_remove(struct pla - } else - kfree(info->data_buff); - -- clk_disable(info->clk); -+ clk_disable_unprepare(info->clk); - - for (cs = 0; cs < pdata->num_cs; cs++) - nand_release(info->host[cs]->mtd); diff --git a/target/linux/mvebu/patches-3.10/0105-mtd-nand-pxa3xx-Check-for-clk_prepare_enable-return-.patch b/target/linux/mvebu/patches-3.10/0105-mtd-nand-pxa3xx-Check-for-clk_prepare_enable-return-.patch deleted file mode 100644 index f075d6e87a..0000000000 --- a/target/linux/mvebu/patches-3.10/0105-mtd-nand-pxa3xx-Check-for-clk_prepare_enable-return-.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 7e8fbc673938278ec7165b99b76227d7cc2ab012 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Wed, 17 Apr 2013 13:38:13 -0300 -Subject: [PATCH 105/203] mtd: nand: pxa3xx: Check for clk_prepare_enable() - return value - -clk_prepare_enable() can fail due to unknown reason. -Add a check for this and return the error code if it fails. - -Signed-off-by: Ezequiel Garcia -Signed-off-by: Artem Bityutskiy -Signed-off-by: David Woodhouse ---- - drivers/mtd/nand/pxa3xx_nand.c | 4 +++- - 1 file changed, 3 insertions(+), 1 deletion(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -1072,7 +1072,9 @@ static int alloc_nand_resource(struct pl - dev_err(&pdev->dev, "failed to get nand clock\n"); - return PTR_ERR(info->clk); - } -- clk_prepare_enable(info->clk); -+ ret = clk_prepare_enable(info->clk); -+ if (ret < 0) -+ return ret; - - /* - * This is a dirty hack to make this driver work from devicetree diff --git a/target/linux/mvebu/patches-3.10/0106-mtd-nand-pxa3xx-Move-buffer-release-code-to-its-own-.patch b/target/linux/mvebu/patches-3.10/0106-mtd-nand-pxa3xx-Move-buffer-release-code-to-its-own-.patch deleted file mode 100644 index b199fcf833..0000000000 --- a/target/linux/mvebu/patches-3.10/0106-mtd-nand-pxa3xx-Move-buffer-release-code-to-its-own-.patch +++ /dev/null @@ -1,66 +0,0 @@ -From 49ff5bd7d4d51a8eb05796f130e9a1a96d18f522 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Wed, 17 Apr 2013 13:38:14 -0300 -Subject: [PATCH 106/203] mtd: nand: pxa3xx: Move buffer release code to its - own function - -Create a function to release the buffer and the dma channel, thus undoing -what pxa3xx_nand_init_buff() did. This commit makes the code more readable -and will allow to handle non-DMA capable platforms easier. - -Signed-off-by: Ezequiel Garcia -Signed-off-by: Artem Bityutskiy -Signed-off-by: David Woodhouse ---- - drivers/mtd/nand/pxa3xx_nand.c | 26 ++++++++++++++------------ - 1 file changed, 14 insertions(+), 12 deletions(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -912,6 +912,18 @@ static int pxa3xx_nand_init_buff(struct - return 0; - } - -+static void pxa3xx_nand_free_buff(struct pxa3xx_nand_info *info) -+{ -+ struct platform_device *pdev = info->pdev; -+ if (use_dma) { -+ pxa_free_dma(info->data_dma_ch); -+ dma_free_coherent(&pdev->dev, MAX_BUFF_SIZE, -+ info->data_buff, info->data_buff_phys); -+ } else { -+ kfree(info->data_buff); -+ } -+} -+ - static int pxa3xx_nand_sensing(struct pxa3xx_nand_info *info) - { - struct mtd_info *mtd; -@@ -1137,12 +1149,7 @@ static int alloc_nand_resource(struct pl - - fail_free_buf: - free_irq(irq, info); -- if (use_dma) { -- pxa_free_dma(info->data_dma_ch); -- dma_free_coherent(&pdev->dev, MAX_BUFF_SIZE, -- info->data_buff, info->data_buff_phys); -- } else -- kfree(info->data_buff); -+ pxa3xx_nand_free_buff(info); - fail_disable_clk: - clk_disable_unprepare(info->clk); - return ret; -@@ -1163,12 +1170,7 @@ static int pxa3xx_nand_remove(struct pla - irq = platform_get_irq(pdev, 0); - if (irq >= 0) - free_irq(irq, info); -- if (use_dma) { -- pxa_free_dma(info->data_dma_ch); -- dma_free_writecombine(&pdev->dev, MAX_BUFF_SIZE, -- info->data_buff, info->data_buff_phys); -- } else -- kfree(info->data_buff); -+ pxa3xx_nand_free_buff(info); - - clk_disable_unprepare(info->clk); - diff --git a/target/linux/mvebu/patches-3.10/0107-mtd-nand-pxa3xx-Set-info-use_dma-properly.patch b/target/linux/mvebu/patches-3.10/0107-mtd-nand-pxa3xx-Set-info-use_dma-properly.patch deleted file mode 100644 index 388b709de2..0000000000 --- a/target/linux/mvebu/patches-3.10/0107-mtd-nand-pxa3xx-Set-info-use_dma-properly.patch +++ /dev/null @@ -1,46 +0,0 @@ -From c16f0b44984bc623621d26df22823b50f13f65d8 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Tue, 14 May 2013 08:15:21 -0300 -Subject: [PATCH 107/203] mtd: nand: pxa3xx: Set info->use_dma properly - -Currently, the variable info->use_dma is never set and always -zero-valued which means the driver never does DMA transfers. -We fix this by simply setting info->use_dma to the module parameter, -also named 'use_dma'. Note that the module parameter has the same name, -but different semantics. - -This fixes a regression introduced by the below commit -which removed the info->use_dma variable set. - - commit 4eb2da8994042d68e84e31138788429a102da2ea - Author: Lei Wen - Date: Mon Feb 28 10:32:13 2011 +0800 - - mtd: pxa3xx_nand: unify prepare command - -Before the above commit, the driver had use_dma=1 on all NAND commands -except on CMD_STATUS. This behavior is long lost and we are not -recovering in this patch, either. - -This was spotted and verified by human inspection. - -Signed-off-by: Ezequiel Garcia -Tested-by: Nikita Kiryanov -Acked-by: Igor Grinberg -Reviewed-by: Haojian Zhuang -Signed-off-by: Artem Bityutskiy -Signed-off-by: David Woodhouse ---- - drivers/mtd/nand/pxa3xx_nand.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -506,6 +506,7 @@ static int prepare_command_pool(struct p - info->buf_count = 0; - info->oob_size = 0; - info->use_ecc = 0; -+ info->use_dma = (use_dma) ? 1 : 0; - info->is_ready = 0; - info->retcode = ERR_NONE; - if (info->cs != 0) diff --git a/target/linux/mvebu/patches-3.10/0108-mtd-nand-pxa3xx-Use-of_machine_is_compatible.patch b/target/linux/mvebu/patches-3.10/0108-mtd-nand-pxa3xx-Use-of_machine_is_compatible.patch deleted file mode 100644 index 76a0030566..0000000000 --- a/target/linux/mvebu/patches-3.10/0108-mtd-nand-pxa3xx-Use-of_machine_is_compatible.patch +++ /dev/null @@ -1,29 +0,0 @@ -From baef6bdc8a3e9cb30ab254fd23eb655d592a19df Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Tue, 14 May 2013 08:15:22 -0300 -Subject: [PATCH 108/203] mtd: nand: pxa3xx: Use of_machine_is_compatible() - -This patch replaces cpu_is_pxa3xx() with of_machine_is_compatible() -which allows to build this driver for other platforms than ARCH_PXA. - -Signed-off-by: Ezequiel Garcia -Tested-by: Nikita Kiryanov -Acked-by: Igor Grinberg -Reviewed-by: Haojian Zhuang -Signed-off-by: Artem Bityutskiy -Signed-off-by: David Woodhouse ---- - drivers/mtd/nand/pxa3xx_nand.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -1094,7 +1094,7 @@ static int alloc_nand_resource(struct pl - * bindings. It can be removed once we have a prober DMA controller - * framework for DT. - */ -- if (pdev->dev.of_node && cpu_is_pxa3xx()) { -+ if (pdev->dev.of_node && of_machine_is_compatible("marvell,pxa3xx")) { - info->drcmr_dat = 97; - info->drcmr_cmd = 99; - } else { diff --git a/target/linux/mvebu/patches-3.10/0109-mtd-nand-pxa3xx-Fix-MODULE_DEVICE_TABLE-declaration.patch b/target/linux/mvebu/patches-3.10/0109-mtd-nand-pxa3xx-Fix-MODULE_DEVICE_TABLE-declaration.patch deleted file mode 100644 index c8f9a04c48..0000000000 --- a/target/linux/mvebu/patches-3.10/0109-mtd-nand-pxa3xx-Fix-MODULE_DEVICE_TABLE-declaration.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 3bda9dc1472596d094f020ab7231466d54b6fe00 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Tue, 14 May 2013 08:15:23 -0300 -Subject: [PATCH 109/203] mtd: nand: pxa3xx: Fix MODULE_DEVICE_TABLE - declaration - -This module's device table is incorrectly declared using -i2c_pxa_dt_ids, instead of pxa3xx_nand_dt_ids. - -Signed-off-by: Ezequiel Garcia -Tested-by: Nikita Kiryanov -Acked-by: Igor Grinberg -Reviewed-by: Haojian Zhuang -Signed-off-by: Artem Bityutskiy -Signed-off-by: David Woodhouse ---- - drivers/mtd/nand/pxa3xx_nand.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -1185,7 +1185,7 @@ static struct of_device_id pxa3xx_nand_d - { .compatible = "marvell,pxa3xx-nand" }, - {} - }; --MODULE_DEVICE_TABLE(of, i2c_pxa_dt_ids); -+MODULE_DEVICE_TABLE(of, pxa3xx_nand_dt_ids); - - static int pxa3xx_nand_probe_dt(struct platform_device *pdev) - { diff --git a/target/linux/mvebu/patches-3.10/0110-mtd-nand-pxa3xx-Add-address-support-for-READID-comma.patch b/target/linux/mvebu/patches-3.10/0110-mtd-nand-pxa3xx-Add-address-support-for-READID-comma.patch deleted file mode 100644 index 583b95cea9..0000000000 --- a/target/linux/mvebu/patches-3.10/0110-mtd-nand-pxa3xx-Add-address-support-for-READID-comma.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 82dad325809637899313315c3103985df94c90a5 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Tue, 14 May 2013 08:15:24 -0300 -Subject: [PATCH 110/203] mtd: nand: pxa3xx: Add address support for READID - command - -This allows to support READID ONFI command which sends 0x20 -as address together with the 0x90 READID command. - -This is required to detect ONFI compliant devices. - -Signed-off-by: Ezequiel Garcia -Tested-by: Nikita Kiryanov -Acked-by: Igor Grinberg -Reviewed-by: Haojian Zhuang -Signed-off-by: Artem Bityutskiy -Signed-off-by: David Woodhouse ---- - drivers/mtd/nand/pxa3xx_nand.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -596,6 +596,7 @@ static int prepare_command_pool(struct p - info->ndcb0 |= NDCB0_CMD_TYPE(3) - | NDCB0_ADDR_CYC(1) - | cmd; -+ info->ndcb1 = (column & 0xFF); - - info->data_size = 8; - break; diff --git a/target/linux/mvebu/patches-3.10/0111-mtd-nand-pxa3xx-Add-support-for-Read-parameter-page-.patch b/target/linux/mvebu/patches-3.10/0111-mtd-nand-pxa3xx-Add-support-for-Read-parameter-page-.patch deleted file mode 100644 index 101f16af25..0000000000 --- a/target/linux/mvebu/patches-3.10/0111-mtd-nand-pxa3xx-Add-support-for-Read-parameter-page-.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 9d6e063c1fb2cb10e6e0c3883ca3d1944dadcfc4 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Tue, 14 May 2013 08:15:25 -0300 -Subject: [PATCH 111/203] mtd: nand: pxa3xx: Add support for Read parameter - page command - -This command is required to identify ONFI-compliant devices. - -Signed-off-by: Ezequiel Garcia -Tested-by: Nikita Kiryanov -Acked-by: Igor Grinberg -Reviewed-by: Haojian Zhuang -Signed-off-by: Artem Bityutskiy -Signed-off-by: David Woodhouse ---- - drivers/mtd/nand/pxa3xx_nand.c | 10 ++++++++++ - 1 file changed, 10 insertions(+) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -590,6 +590,16 @@ static int prepare_command_pool(struct p - | addr_cycle; - break; - -+ case NAND_CMD_PARAM: -+ cmd = NAND_CMD_PARAM; -+ info->buf_count = 256; -+ info->ndcb0 |= NDCB0_CMD_TYPE(0) -+ | NDCB0_ADDR_CYC(1) -+ | cmd; -+ info->ndcb1 = (column & 0xFF); -+ info->data_size = 256; -+ break; -+ - case NAND_CMD_READID: - cmd = host->cmdset->read_id; - info->buf_count = host->read_id_bytes; diff --git a/target/linux/mvebu/patches-3.10/0112-mtd-nand-pxa3xx_nand-remove-unnecessary-platform_set.patch b/target/linux/mvebu/patches-3.10/0112-mtd-nand-pxa3xx_nand-remove-unnecessary-platform_set.patch deleted file mode 100644 index 9ccec45bf6..0000000000 --- a/target/linux/mvebu/patches-3.10/0112-mtd-nand-pxa3xx_nand-remove-unnecessary-platform_set.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 03ab29791d222be44a7e2f5716f8a1cdbcf76ceb Mon Sep 17 00:00:00 2001 -From: Jingoo Han -Date: Tue, 7 May 2013 15:44:14 +0900 -Subject: [PATCH 112/203] mtd: nand: pxa3xx_nand: remove unnecessary - platform_set_drvdata() - -The driver core clears the driver data to NULL after device_release -or on probe failure, since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d -(device-core: Ensure drvdata = NULL when no driver is bound). -Thus, it is not needed to manually clear the device driver data to NULL. - -Signed-off-by: Jingoo Han -Signed-off-by: Artem Bityutskiy -Signed-off-by: David Woodhouse ---- - drivers/mtd/nand/pxa3xx_nand.c | 1 - - 1 file changed, 1 deletion(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -1177,7 +1177,6 @@ static int pxa3xx_nand_remove(struct pla - return 0; - - pdata = pdev->dev.platform_data; -- platform_set_drvdata(pdev, NULL); - - irq = platform_get_irq(pdev, 0); - if (irq >= 0) diff --git a/target/linux/mvebu/patches-3.10/0113-mtd-nand-use-dev_get_platdata.patch b/target/linux/mvebu/patches-3.10/0113-mtd-nand-use-dev_get_platdata.patch deleted file mode 100644 index a77ab9f923..0000000000 --- a/target/linux/mvebu/patches-3.10/0113-mtd-nand-use-dev_get_platdata.patch +++ /dev/null @@ -1,80 +0,0 @@ -From f37031e030eb05ba579c82b9e0424d2608c1ad67 Mon Sep 17 00:00:00 2001 -From: Jingoo Han -Date: Tue, 30 Jul 2013 17:18:33 +0900 -Subject: [PATCH 113/203] mtd: nand: use dev_get_platdata() - -Use the wrapper function for retrieving the platform data instead of -accessing dev->platform_data directly. - -Signed-off-by: Jingoo Han -Signed-off-by: Brian Norris -Signed-off-by: David Woodhouse ---- - drivers/mtd/nand/pxa3xx_nand.c | 14 +++++++------- - 1 file changed, 7 insertions(+), 7 deletions(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -815,7 +815,7 @@ static int pxa3xx_nand_config_flash(stru - const struct pxa3xx_nand_flash *f) - { - struct platform_device *pdev = info->pdev; -- struct pxa3xx_nand_platform_data *pdata = pdev->dev.platform_data; -+ struct pxa3xx_nand_platform_data *pdata = dev_get_platdata(&pdev->dev); - struct pxa3xx_nand_host *host = info->host[info->cs]; - uint32_t ndcr = 0x0; /* enable all interrupts */ - -@@ -958,7 +958,7 @@ static int pxa3xx_nand_scan(struct mtd_i - struct pxa3xx_nand_host *host = mtd->priv; - struct pxa3xx_nand_info *info = host->info_data; - struct platform_device *pdev = info->pdev; -- struct pxa3xx_nand_platform_data *pdata = pdev->dev.platform_data; -+ struct pxa3xx_nand_platform_data *pdata = dev_get_platdata(&pdev->dev); - struct nand_flash_dev pxa3xx_flash_ids[2], *def = NULL; - const struct pxa3xx_nand_flash *f = NULL; - struct nand_chip *chip = mtd->priv; -@@ -1058,7 +1058,7 @@ static int alloc_nand_resource(struct pl - struct resource *r; - int ret, irq, cs; - -- pdata = pdev->dev.platform_data; -+ pdata = dev_get_platdata(&pdev->dev); - info = devm_kzalloc(&pdev->dev, sizeof(*info) + (sizeof(*mtd) + - sizeof(*host)) * pdata->num_cs, GFP_KERNEL); - if (!info) -@@ -1176,7 +1176,7 @@ static int pxa3xx_nand_remove(struct pla - if (!info) - return 0; - -- pdata = pdev->dev.platform_data; -+ pdata = dev_get_platdata(&pdev->dev); - - irq = platform_get_irq(pdev, 0); - if (irq >= 0) -@@ -1239,7 +1239,7 @@ static int pxa3xx_nand_probe(struct plat - if (ret) - return ret; - -- pdata = pdev->dev.platform_data; -+ pdata = dev_get_platdata(&pdev->dev); - if (!pdata) { - dev_err(&pdev->dev, "no platform data defined\n"); - return -ENODEV; -@@ -1286,7 +1286,7 @@ static int pxa3xx_nand_suspend(struct pl - struct mtd_info *mtd; - int cs; - -- pdata = pdev->dev.platform_data; -+ pdata = dev_get_platdata(&pdev->dev); - if (info->state) { - dev_err(&pdev->dev, "driver busy, state = %d\n", info->state); - return -EAGAIN; -@@ -1307,7 +1307,7 @@ static int pxa3xx_nand_resume(struct pla - struct mtd_info *mtd; - int cs; - -- pdata = pdev->dev.platform_data; -+ pdata = dev_get_platdata(&pdev->dev); - /* We don't want to handle interrupt without calling mtd routine */ - disable_int(info, NDCR_INT_MASK); - diff --git a/target/linux/mvebu/patches-3.10/0114-mtd-nand-pxa3xx-Introduce-marvell-armada370-nand-com.patch b/target/linux/mvebu/patches-3.10/0114-mtd-nand-pxa3xx-Introduce-marvell-armada370-nand-com.patch deleted file mode 100644 index b18e61fbca..0000000000 --- a/target/linux/mvebu/patches-3.10/0114-mtd-nand-pxa3xx-Introduce-marvell-armada370-nand-com.patch +++ /dev/null @@ -1,88 +0,0 @@ -From 259e46e4327a9937761fd3f7bc07e208b1fa50e6 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Sat, 10 Aug 2013 16:34:52 -0300 -Subject: [PATCH 114/203] mtd: nand: pxa3xx: Introduce 'marvell,armada370-nand' - compatible string - -This driver supports NFCv1 (as found in PXA SoC) and NFCv2 (as found in -Armada 370/XP SoC). As both controller has a few differences, a way of -distinguishing between the two is needed. - -This commit introduces a new compatible string 'marvell,armada370-nand' -and assigns a compatible data of type enum pxa3xx_nand_variant to allow -such distinction. - -Signed-off-by: Ezequiel Garcia -Tested-by: Daniel Mack -Cc: devicetree@vger.kernel.org -Signed-off-by: Brian Norris -Signed-off-by: David Woodhouse ---- - drivers/mtd/nand/pxa3xx_nand.c | 31 ++++++++++++++++++++++++++++++- - 1 file changed, 30 insertions(+), 1 deletion(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -123,6 +123,11 @@ enum { - STATE_READY, - }; - -+enum pxa3xx_nand_variant { -+ PXA3XX_NAND_VARIANT_PXA, -+ PXA3XX_NAND_VARIANT_ARMADA370, -+}; -+ - struct pxa3xx_nand_host { - struct nand_chip chip; - struct pxa3xx_nand_cmdset *cmdset; -@@ -171,6 +176,12 @@ struct pxa3xx_nand_info { - struct pxa3xx_nand_host *host[NUM_CHIP_SELECT]; - unsigned int state; - -+ /* -+ * This driver supports NFCv1 (as found in PXA SoC) -+ * and NFCv2 (as found in Armada 370/XP SoC). -+ */ -+ enum pxa3xx_nand_variant variant; -+ - int cs; - int use_ecc; /* use HW ECC ? */ - int use_dma; /* use DMA ? */ -@@ -1192,11 +1203,28 @@ static int pxa3xx_nand_remove(struct pla - - #ifdef CONFIG_OF - static struct of_device_id pxa3xx_nand_dt_ids[] = { -- { .compatible = "marvell,pxa3xx-nand" }, -+ { -+ .compatible = "marvell,pxa3xx-nand", -+ .data = (void *)PXA3XX_NAND_VARIANT_PXA, -+ }, -+ { -+ .compatible = "marvell,armada370-nand", -+ .data = (void *)PXA3XX_NAND_VARIANT_ARMADA370, -+ }, - {} - }; - MODULE_DEVICE_TABLE(of, pxa3xx_nand_dt_ids); - -+static enum pxa3xx_nand_variant -+pxa3xx_nand_get_variant(struct platform_device *pdev) -+{ -+ const struct of_device_id *of_id = -+ of_match_device(pxa3xx_nand_dt_ids, &pdev->dev); -+ if (!of_id) -+ return PXA3XX_NAND_VARIANT_PXA; -+ return (enum pxa3xx_nand_variant)of_id->data; -+} -+ - static int pxa3xx_nand_probe_dt(struct platform_device *pdev) - { - struct pxa3xx_nand_platform_data *pdata; -@@ -1252,6 +1280,7 @@ static int pxa3xx_nand_probe(struct plat - } - - info = platform_get_drvdata(pdev); -+ info->variant = pxa3xx_nand_get_variant(pdev); - probe_success = 0; - for (cs = 0; cs < pdata->num_cs; cs++) { - info->cs = cs; diff --git a/target/linux/mvebu/patches-3.10/0115-mtd-nand-pxa3xx-Handle-ECC-and-DMA-enable-disable-pr.patch b/target/linux/mvebu/patches-3.10/0115-mtd-nand-pxa3xx-Handle-ECC-and-DMA-enable-disable-pr.patch deleted file mode 100644 index e31cd2f9ab..0000000000 --- a/target/linux/mvebu/patches-3.10/0115-mtd-nand-pxa3xx-Handle-ECC-and-DMA-enable-disable-pr.patch +++ /dev/null @@ -1,39 +0,0 @@ -From d6af8f27223a244d74ab44842bdec707c97cfe55 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Mon, 12 Aug 2013 14:14:48 -0300 -Subject: [PATCH 115/203] mtd: nand: pxa3xx: Handle ECC and DMA enable/disable - properly - -When ECC is not selected, the ECC enable bit must be cleared -in the NAND control register. Same applies to DMA. - -Signed-off-by: Ezequiel Garcia -Tested-by: Daniel Mack -Signed-off-by: Brian Norris -Signed-off-by: David Woodhouse ---- - drivers/mtd/nand/pxa3xx_nand.c | 13 +++++++++++-- - 1 file changed, 11 insertions(+), 2 deletions(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -314,8 +314,17 @@ static void pxa3xx_nand_start(struct pxa - uint32_t ndcr; - - ndcr = host->reg_ndcr; -- ndcr |= info->use_ecc ? NDCR_ECC_EN : 0; -- ndcr |= info->use_dma ? NDCR_DMA_EN : 0; -+ -+ if (info->use_ecc) -+ ndcr |= NDCR_ECC_EN; -+ else -+ ndcr &= ~NDCR_ECC_EN; -+ -+ if (info->use_dma) -+ ndcr |= NDCR_DMA_EN; -+ else -+ ndcr &= ~NDCR_DMA_EN; -+ - ndcr |= NDCR_ND_RUN; - - /* clear status bits and run */ diff --git a/target/linux/mvebu/patches-3.10/0116-mtd-nand-pxa3xx-Allow-to-set-clear-the-spare-enable-.patch b/target/linux/mvebu/patches-3.10/0116-mtd-nand-pxa3xx-Allow-to-set-clear-the-spare-enable-.patch deleted file mode 100644 index eca13b4b0d..0000000000 --- a/target/linux/mvebu/patches-3.10/0116-mtd-nand-pxa3xx-Allow-to-set-clear-the-spare-enable-.patch +++ /dev/null @@ -1,49 +0,0 @@ -From be5f1d59341e48dbe0730253417c52bf79c6c3a7 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Mon, 12 Aug 2013 14:14:49 -0300 -Subject: [PATCH 116/203] mtd: nand: pxa3xx: Allow to set/clear the 'spare - enable' field - -Some commands (such as the ONFI parameter page read) need to -clear the 'spare enable' bit. This commit allows to set/clear -depending on the prepared command, instead of having it always -set. - -Signed-off-by: Ezequiel Garcia -Tested-by: Daniel Mack -Signed-off-by: Brian Norris -Signed-off-by: David Woodhouse ---- - drivers/mtd/nand/pxa3xx_nand.c | 7 +++++++ - 1 file changed, 7 insertions(+) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -185,6 +185,7 @@ struct pxa3xx_nand_info { - int cs; - int use_ecc; /* use HW ECC ? */ - int use_dma; /* use DMA ? */ -+ int use_spare; /* use spare ? */ - int is_ready; - - unsigned int page_size; /* page size of attached chip */ -@@ -325,6 +326,11 @@ static void pxa3xx_nand_start(struct pxa - else - ndcr &= ~NDCR_DMA_EN; - -+ if (info->use_spare) -+ ndcr |= NDCR_SPARE_EN; -+ else -+ ndcr &= ~NDCR_SPARE_EN; -+ - ndcr |= NDCR_ND_RUN; - - /* clear status bits and run */ -@@ -526,6 +532,7 @@ static int prepare_command_pool(struct p - info->buf_count = 0; - info->oob_size = 0; - info->use_ecc = 0; -+ info->use_spare = 1; - info->use_dma = (use_dma) ? 1 : 0; - info->is_ready = 0; - info->retcode = ERR_NONE; diff --git a/target/linux/mvebu/patches-3.10/0117-mtd-nand-pxa3xx-Support-command-buffer-3.patch b/target/linux/mvebu/patches-3.10/0117-mtd-nand-pxa3xx-Support-command-buffer-3.patch deleted file mode 100644 index f9d2d31aff..0000000000 --- a/target/linux/mvebu/patches-3.10/0117-mtd-nand-pxa3xx-Support-command-buffer-3.patch +++ /dev/null @@ -1,59 +0,0 @@ -From 6bbda039fe5e9d1b3c04f4f0dd8479a2c102d28e Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Mon, 12 Aug 2013 14:14:50 -0300 -Subject: [PATCH 117/203] mtd: nand: pxa3xx: Support command buffer #3 - -Some newer controllers support a fourth command buffer. This additional -command buffer allows to set an arbitrary length count, using the -NDCB3.NDLENCNT field, to perform non-standard length operations -such as the ONFI parameter page read. - -Signed-off-by: Ezequiel Garcia -Tested-by: Daniel Mack -Signed-off-by: Brian Norris -Signed-off-by: David Woodhouse ---- - drivers/mtd/nand/pxa3xx_nand.c | 15 +++++++++++++++ - 1 file changed, 15 insertions(+) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -197,6 +197,7 @@ struct pxa3xx_nand_info { - uint32_t ndcb0; - uint32_t ndcb1; - uint32_t ndcb2; -+ uint32_t ndcb3; - }; - - static bool use_dma = 1; -@@ -493,9 +494,22 @@ static irqreturn_t pxa3xx_nand_irq(int i - nand_writel(info, NDSR, NDSR_WRCMDREQ); - status &= ~NDSR_WRCMDREQ; - info->state = STATE_CMD_HANDLE; -+ -+ /* -+ * Command buffer registers NDCB{0-2} (and optionally NDCB3) -+ * must be loaded by writing directly either 12 or 16 -+ * bytes directly to NDCB0, four bytes at a time. -+ * -+ * Direct write access to NDCB1, NDCB2 and NDCB3 is ignored -+ * but each NDCBx register can be read. -+ */ - nand_writel(info, NDCB0, info->ndcb0); - nand_writel(info, NDCB0, info->ndcb1); - nand_writel(info, NDCB0, info->ndcb2); -+ -+ /* NDCB3 register is available in NFCv2 (Armada 370/XP SoC) */ -+ if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370) -+ nand_writel(info, NDCB0, info->ndcb3); - } - - /* clear NDSR to let the controller exit the IRQ */ -@@ -554,6 +568,7 @@ static int prepare_command_pool(struct p - default: - info->ndcb1 = 0; - info->ndcb2 = 0; -+ info->ndcb3 = 0; - break; - } - diff --git a/target/linux/mvebu/patches-3.10/0118-mtd-nand-pxa3xx-Use-length-override-in-ONFI-paramate.patch b/target/linux/mvebu/patches-3.10/0118-mtd-nand-pxa3xx-Use-length-override-in-ONFI-paramate.patch deleted file mode 100644 index 8694af8afd..0000000000 --- a/target/linux/mvebu/patches-3.10/0118-mtd-nand-pxa3xx-Use-length-override-in-ONFI-paramate.patch +++ /dev/null @@ -1,52 +0,0 @@ -From adbba4cf6ea15c2acb53e3fd9fc03c6b37f1f1fc Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Mon, 12 Aug 2013 14:14:51 -0300 -Subject: [PATCH 118/203] mtd: nand: pxa3xx: Use 'length override' in ONFI - paramater page read - -The ONFI command 'parameter page read' needs a non-standard length. -Therefore, we enable the 'length override' field in NDCB0 and set -a non-zero 'length count' in NDCB3. - -Additionally, the 'spare enable' bit must be disabled for any command -that sets a non-zero 'length count' in NDCB3. - -Signed-off-by: Ezequiel Garcia -Tested-by: Daniel Mack -Signed-off-by: Brian Norris -Signed-off-by: David Woodhouse ---- - drivers/mtd/nand/pxa3xx_nand.c | 6 ++++++ - 1 file changed, 6 insertions(+) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -80,6 +80,7 @@ - #define NDSR_RDDREQ (0x1 << 1) - #define NDSR_WRCMDREQ (0x1) - -+#define NDCB0_LEN_OVRD (0x1 << 28) - #define NDCB0_ST_ROW_EN (0x1 << 26) - #define NDCB0_AUTO_RS (0x1 << 25) - #define NDCB0_CSEL (0x1 << 24) -@@ -562,6 +563,9 @@ static int prepare_command_pool(struct p - case NAND_CMD_READOOB: - pxa3xx_set_datasize(info); - break; -+ case NAND_CMD_PARAM: -+ info->use_spare = 0; -+ break; - case NAND_CMD_SEQIN: - exec_cmd = 0; - break; -@@ -637,8 +641,10 @@ static int prepare_command_pool(struct p - info->buf_count = 256; - info->ndcb0 |= NDCB0_CMD_TYPE(0) - | NDCB0_ADDR_CYC(1) -+ | NDCB0_LEN_OVRD - | cmd; - info->ndcb1 = (column & 0xFF); -+ info->ndcb3 = 256; - info->data_size = 256; - break; - diff --git a/target/linux/mvebu/patches-3.10/0119-mtd-nand-pxa3xx-Add-a-local-loop-variable.patch b/target/linux/mvebu/patches-3.10/0119-mtd-nand-pxa3xx-Add-a-local-loop-variable.patch deleted file mode 100644 index f25a3611f4..0000000000 --- a/target/linux/mvebu/patches-3.10/0119-mtd-nand-pxa3xx-Add-a-local-loop-variable.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 9f27a3899318ef0c4c147ed2d84cfbfb339d9bb6 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Mon, 12 Aug 2013 14:14:52 -0300 -Subject: [PATCH 119/203] mtd: nand: pxa3xx: Add a local loop variable - -This is just a cosmetic change, to make the code more readable. - -Signed-off-by: Ezequiel Garcia -Tested-by: Daniel Mack -Signed-off-by: Brian Norris -Signed-off-by: David Woodhouse ---- - drivers/mtd/nand/pxa3xx_nand.c | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -1320,8 +1320,9 @@ static int pxa3xx_nand_probe(struct plat - info->variant = pxa3xx_nand_get_variant(pdev); - probe_success = 0; - for (cs = 0; cs < pdata->num_cs; cs++) { -+ struct mtd_info *mtd = info->host[cs]->mtd; - info->cs = cs; -- ret = pxa3xx_nand_scan(info->host[cs]->mtd); -+ ret = pxa3xx_nand_scan(mtd); - if (ret) { - dev_warn(&pdev->dev, "failed to scan nand at cs %d\n", - cs); -@@ -1329,7 +1330,7 @@ static int pxa3xx_nand_probe(struct plat - } - - ppdata.of_node = pdev->dev.of_node; -- ret = mtd_device_parse_register(info->host[cs]->mtd, NULL, -+ ret = mtd_device_parse_register(mtd, NULL, - &ppdata, pdata->parts[cs], - pdata->nr_parts[cs]); - if (!ret) diff --git a/target/linux/mvebu/patches-3.10/0120-mtd-nand-pxa3xx-Remove-hardcoded-mtd-name.patch b/target/linux/mvebu/patches-3.10/0120-mtd-nand-pxa3xx-Remove-hardcoded-mtd-name.patch deleted file mode 100644 index e9791e8c00..0000000000 --- a/target/linux/mvebu/patches-3.10/0120-mtd-nand-pxa3xx-Remove-hardcoded-mtd-name.patch +++ /dev/null @@ -1,45 +0,0 @@ -From 96d8ffc47c7ee9689b8b48ac9588e0b00fa9bd44 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Mon, 12 Aug 2013 14:14:53 -0300 -Subject: [PATCH 120/203] mtd: nand: pxa3xx: Remove hardcoded mtd name - -There's no advantage in using a hardcoded name for the mtd device. -Instead use the provided by the platform_device. - -Signed-off-by: Ezequiel Garcia -Tested-by: Daniel Mack -Signed-off-by: Brian Norris -Signed-off-by: David Woodhouse ---- - drivers/mtd/nand/pxa3xx_nand.c | 6 ++---- - 1 file changed, 2 insertions(+), 4 deletions(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -244,8 +244,6 @@ static struct pxa3xx_nand_flash builtin_ - /* Define a default flash type setting serve as flash detecting only */ - #define DEFAULT_FLASH_TYPE (&builtin_flash_types[0]) - --const char *mtd_names[] = {"pxa3xx_nand-0", "pxa3xx_nand-1", NULL}; -- - #define NDTR0_tCH(c) (min((c), 7) << 19) - #define NDTR0_tCS(c) (min((c), 7) << 16) - #define NDTR0_tWH(c) (min((c), 7) << 11) -@@ -1091,8 +1089,6 @@ KEEP_CONFIG: - host->row_addr_cycles = 3; - else - host->row_addr_cycles = 2; -- -- mtd->name = mtd_names[0]; - return nand_scan_tail(mtd); - } - -@@ -1321,6 +1317,8 @@ static int pxa3xx_nand_probe(struct plat - probe_success = 0; - for (cs = 0; cs < pdata->num_cs; cs++) { - struct mtd_info *mtd = info->host[cs]->mtd; -+ -+ mtd->name = pdev->name; - info->cs = cs; - ret = pxa3xx_nand_scan(mtd); - if (ret) { diff --git a/target/linux/mvebu/patches-3.10/0121-mtd-nand-pxa3xx-Remove-unneeded-internal-cmdset.patch b/target/linux/mvebu/patches-3.10/0121-mtd-nand-pxa3xx-Remove-unneeded-internal-cmdset.patch deleted file mode 100644 index 4d5761172a..0000000000 --- a/target/linux/mvebu/patches-3.10/0121-mtd-nand-pxa3xx-Remove-unneeded-internal-cmdset.patch +++ /dev/null @@ -1,200 +0,0 @@ -From 45d36da3f284cd424b0ac2060cfccc17f9979552 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Mon, 12 Aug 2013 14:14:54 -0300 -Subject: [PATCH 121/203] mtd: nand: pxa3xx: Remove unneeded internal cmdset - -Use the defined macros for NAND command instead of using a constant -internal structure. This commit is only a cleanup, there's no -functionality modification. - -Signed-off-by: Ezequiel Garcia -Tested-by: Daniel Mack -Signed-off-by: Brian Norris -Signed-off-by: David Woodhouse ---- - drivers/mtd/nand/pxa3xx_nand.c | 63 ++++++++------------------- - include/linux/platform_data/mtd-nand-pxa3xx.h | 13 ------ - 2 files changed, 17 insertions(+), 59 deletions(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -131,7 +131,6 @@ enum pxa3xx_nand_variant { - - struct pxa3xx_nand_host { - struct nand_chip chip; -- struct pxa3xx_nand_cmdset *cmdset; - struct mtd_info *mtd; - void *info_data; - -@@ -205,23 +204,6 @@ static bool use_dma = 1; - module_param(use_dma, bool, 0444); - MODULE_PARM_DESC(use_dma, "enable DMA for data transferring to/from NAND HW"); - --/* -- * Default NAND flash controller configuration setup by the -- * bootloader. This configuration is used only when pdata->keep_config is set -- */ --static struct pxa3xx_nand_cmdset default_cmdset = { -- .read1 = 0x3000, -- .read2 = 0x0050, -- .program = 0x1080, -- .read_status = 0x0070, -- .read_id = 0x0090, -- .erase = 0xD060, -- .reset = 0x00FF, -- .lock = 0x002A, -- .unlock = 0x2423, -- .lock_status = 0x007A, --}; -- - static struct pxa3xx_nand_timing timing[] = { - { 40, 80, 60, 100, 80, 100, 90000, 400, 40, }, - { 10, 0, 20, 40, 30, 40, 11123, 110, 10, }, -@@ -530,7 +512,6 @@ static inline int is_buf_blank(uint8_t * - static int prepare_command_pool(struct pxa3xx_nand_info *info, int command, - uint16_t column, int page_addr) - { -- uint16_t cmd; - int addr_cycle, exec_cmd; - struct pxa3xx_nand_host *host; - struct mtd_info *mtd; -@@ -580,21 +561,17 @@ static int prepare_command_pool(struct p - switch (command) { - case NAND_CMD_READOOB: - case NAND_CMD_READ0: -- cmd = host->cmdset->read1; -+ info->buf_start = column; -+ info->ndcb0 |= NDCB0_CMD_TYPE(0) -+ | addr_cycle -+ | NAND_CMD_READ0; -+ - if (command == NAND_CMD_READOOB) -- info->buf_start = mtd->writesize + column; -- else -- info->buf_start = column; -+ info->buf_start += mtd->writesize; - -- if (unlikely(host->page_size < PAGE_CHUNK_SIZE)) -- info->ndcb0 |= NDCB0_CMD_TYPE(0) -- | addr_cycle -- | (cmd & NDCB0_CMD1_MASK); -- else -- info->ndcb0 |= NDCB0_CMD_TYPE(0) -- | NDCB0_DBC -- | addr_cycle -- | cmd; -+ /* Second command setting for large pages */ -+ if (host->page_size >= PAGE_CHUNK_SIZE) -+ info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8); - - case NAND_CMD_SEQIN: - /* small page addr setting */ -@@ -625,62 +602,58 @@ static int prepare_command_pool(struct p - break; - } - -- cmd = host->cmdset->program; - info->ndcb0 |= NDCB0_CMD_TYPE(0x1) - | NDCB0_AUTO_RS - | NDCB0_ST_ROW_EN - | NDCB0_DBC -- | cmd -+ | (NAND_CMD_PAGEPROG << 8) -+ | NAND_CMD_SEQIN - | addr_cycle; - break; - - case NAND_CMD_PARAM: -- cmd = NAND_CMD_PARAM; - info->buf_count = 256; - info->ndcb0 |= NDCB0_CMD_TYPE(0) - | NDCB0_ADDR_CYC(1) - | NDCB0_LEN_OVRD -- | cmd; -+ | command; - info->ndcb1 = (column & 0xFF); - info->ndcb3 = 256; - info->data_size = 256; - break; - - case NAND_CMD_READID: -- cmd = host->cmdset->read_id; - info->buf_count = host->read_id_bytes; - info->ndcb0 |= NDCB0_CMD_TYPE(3) - | NDCB0_ADDR_CYC(1) -- | cmd; -+ | command; - info->ndcb1 = (column & 0xFF); - - info->data_size = 8; - break; - case NAND_CMD_STATUS: -- cmd = host->cmdset->read_status; - info->buf_count = 1; - info->ndcb0 |= NDCB0_CMD_TYPE(4) - | NDCB0_ADDR_CYC(1) -- | cmd; -+ | command; - - info->data_size = 8; - break; - - case NAND_CMD_ERASE1: -- cmd = host->cmdset->erase; - info->ndcb0 |= NDCB0_CMD_TYPE(2) - | NDCB0_AUTO_RS - | NDCB0_ADDR_CYC(3) - | NDCB0_DBC -- | cmd; -+ | (NAND_CMD_ERASE2 << 8) -+ | NAND_CMD_ERASE1; - info->ndcb1 = page_addr; - info->ndcb2 = 0; - - break; - case NAND_CMD_RESET: -- cmd = host->cmdset->reset; - info->ndcb0 |= NDCB0_CMD_TYPE(5) -- | cmd; -+ | command; - - break; - -@@ -876,7 +849,6 @@ static int pxa3xx_nand_config_flash(stru - } - - /* calculate flash information */ -- host->cmdset = &default_cmdset; - host->page_size = f->page_size; - host->read_id_bytes = (f->page_size == 2048) ? 4 : 2; - -@@ -922,7 +894,6 @@ static int pxa3xx_nand_detect_config(str - } - - host->reg_ndcr = ndcr & ~NDCR_INT_MASK; -- host->cmdset = &default_cmdset; - - host->ndtr0cs0 = nand_readl(info, NDTR0CS0); - host->ndtr1cs0 = nand_readl(info, NDTR1CS0); ---- a/include/linux/platform_data/mtd-nand-pxa3xx.h -+++ b/include/linux/platform_data/mtd-nand-pxa3xx.h -@@ -16,19 +16,6 @@ struct pxa3xx_nand_timing { - unsigned int tAR; /* ND_ALE low to ND_nRE low delay */ - }; - --struct pxa3xx_nand_cmdset { -- uint16_t read1; -- uint16_t read2; -- uint16_t program; -- uint16_t read_status; -- uint16_t read_id; -- uint16_t erase; -- uint16_t reset; -- uint16_t lock; -- uint16_t unlock; -- uint16_t lock_status; --}; -- - struct pxa3xx_nand_flash { - char *name; - uint32_t chip_id; diff --git a/target/linux/mvebu/patches-3.10/0122-mtd-nand-pxa3xx-Move-cached-registers-to-info-struct.patch b/target/linux/mvebu/patches-3.10/0122-mtd-nand-pxa3xx-Move-cached-registers-to-info-struct.patch deleted file mode 100644 index a5109f0ce7..0000000000 --- a/target/linux/mvebu/patches-3.10/0122-mtd-nand-pxa3xx-Move-cached-registers-to-info-struct.patch +++ /dev/null @@ -1,127 +0,0 @@ -From 5c5367d7f9ad835b3b8a2dddfbe90e4c6e669084 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Mon, 12 Aug 2013 14:14:55 -0300 -Subject: [PATCH 122/203] mtd: nand: pxa3xx: Move cached registers to info - structure - -This registers are not per-chip (aka host) but controller-wide, -so it's better to store them in the global 'info' structure. - -Signed-off-by: Ezequiel Garcia -Tested-by: Daniel Mack -Signed-off-by: Brian Norris -Signed-off-by: David Woodhouse ---- - drivers/mtd/nand/pxa3xx_nand.c | 36 +++++++++++++++++------------------- - 1 file changed, 17 insertions(+), 19 deletions(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -144,10 +144,6 @@ struct pxa3xx_nand_host { - unsigned int row_addr_cycles; - size_t read_id_bytes; - -- /* cached register value */ -- uint32_t reg_ndcr; -- uint32_t ndtr0cs0; -- uint32_t ndtr1cs0; - }; - - struct pxa3xx_nand_info { -@@ -193,6 +189,11 @@ struct pxa3xx_nand_info { - unsigned int oob_size; - int retcode; - -+ /* cached register value */ -+ uint32_t reg_ndcr; -+ uint32_t ndtr0cs0; -+ uint32_t ndtr1cs0; -+ - /* generated NDCBx register values */ - uint32_t ndcb0; - uint32_t ndcb1; -@@ -258,8 +259,8 @@ static void pxa3xx_nand_set_timing(struc - NDTR1_tWHR(ns2cycle(t->tWHR, nand_clk)) | - NDTR1_tAR(ns2cycle(t->tAR, nand_clk)); - -- host->ndtr0cs0 = ndtr0; -- host->ndtr1cs0 = ndtr1; -+ info->ndtr0cs0 = ndtr0; -+ info->ndtr1cs0 = ndtr1; - nand_writel(info, NDTR0CS0, ndtr0); - nand_writel(info, NDTR1CS0, ndtr1); - } -@@ -267,7 +268,7 @@ static void pxa3xx_nand_set_timing(struc - static void pxa3xx_set_datasize(struct pxa3xx_nand_info *info) - { - struct pxa3xx_nand_host *host = info->host[info->cs]; -- int oob_enable = host->reg_ndcr & NDCR_SPARE_EN; -+ int oob_enable = info->reg_ndcr & NDCR_SPARE_EN; - - info->data_size = host->page_size; - if (!oob_enable) { -@@ -293,10 +294,9 @@ static void pxa3xx_set_datasize(struct p - */ - static void pxa3xx_nand_start(struct pxa3xx_nand_info *info) - { -- struct pxa3xx_nand_host *host = info->host[info->cs]; - uint32_t ndcr; - -- ndcr = host->reg_ndcr; -+ ndcr = info->reg_ndcr; - - if (info->use_ecc) - ndcr |= NDCR_ECC_EN; -@@ -683,7 +683,7 @@ static void pxa3xx_nand_cmdfunc(struct m - * "byte" address into a "word" address appropriate - * for indexing a word-oriented device - */ -- if (host->reg_ndcr & NDCR_DWIDTH_M) -+ if (info->reg_ndcr & NDCR_DWIDTH_M) - column /= 2; - - /* -@@ -693,8 +693,8 @@ static void pxa3xx_nand_cmdfunc(struct m - */ - if (info->cs != host->cs) { - info->cs = host->cs; -- nand_writel(info, NDTR0CS0, host->ndtr0cs0); -- nand_writel(info, NDTR1CS0, host->ndtr1cs0); -+ nand_writel(info, NDTR0CS0, info->ndtr0cs0); -+ nand_writel(info, NDTR1CS0, info->ndtr1cs0); - } - - info->state = STATE_PREPARED; -@@ -870,7 +870,7 @@ static int pxa3xx_nand_config_flash(stru - ndcr |= NDCR_RD_ID_CNT(host->read_id_bytes); - ndcr |= NDCR_SPARE_EN; /* enable spare by default */ - -- host->reg_ndcr = ndcr; -+ info->reg_ndcr = ndcr; - - pxa3xx_nand_set_timing(host, f->timing); - return 0; -@@ -893,11 +893,9 @@ static int pxa3xx_nand_detect_config(str - host->read_id_bytes = 2; - } - -- host->reg_ndcr = ndcr & ~NDCR_INT_MASK; -- -- host->ndtr0cs0 = nand_readl(info, NDTR0CS0); -- host->ndtr1cs0 = nand_readl(info, NDTR1CS0); -- -+ info->reg_ndcr = ndcr & ~NDCR_INT_MASK; -+ info->ndtr0cs0 = nand_readl(info, NDTR0CS0); -+ info->ndtr1cs0 = nand_readl(info, NDTR1CS0); - return 0; - } - -@@ -1044,7 +1042,7 @@ KEEP_CONFIG: - chip->ecc.size = host->page_size; - chip->ecc.strength = 1; - -- if (host->reg_ndcr & NDCR_DWIDTH_M) -+ if (info->reg_ndcr & NDCR_DWIDTH_M) - chip->options |= NAND_BUSWIDTH_16; - - if (nand_scan_ident(mtd, 1, def)) diff --git a/target/linux/mvebu/patches-3.10/0123-mtd-nand-pxa3xx-Make-dma-code-dependent-on-dma-capab.patch b/target/linux/mvebu/patches-3.10/0123-mtd-nand-pxa3xx-Make-dma-code-dependent-on-dma-capab.patch deleted file mode 100644 index 87bec0cd10..0000000000 --- a/target/linux/mvebu/patches-3.10/0123-mtd-nand-pxa3xx-Make-dma-code-dependent-on-dma-capab.patch +++ /dev/null @@ -1,106 +0,0 @@ -From 085ced2b9e159dbeae029e338958b8c8ae9073b9 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Mon, 12 Aug 2013 14:14:56 -0300 -Subject: [PATCH 123/203] mtd: nand: pxa3xx: Make dma code dependent on dma - capable platforms - -This patch adds a macro ARCH_HAS_DMA to compile-out arch specific -dma code, namely pxa_request_dma() and pxa_free_dma(). These symbols -are available only in pxa, which makes impossible to build the driver in -other platforms than ARCH_PXA. - -In order to handle non-dma capable platforms, we implement a fallbacks that -allocate buffers as if 'use_dma=false', putting the dma related code -under the ARCH_HAS_DMA conditional. - -Please note that the correct way to handle this is to migrate the -dma code to use of the mmp_pdma dmaengine driver. However, currently -this is not possible because the two dmaengine drivers can't work together. - -Signed-off-by: Ezequiel Garcia -Tested-by: Daniel Mack -Signed-off-by: Brian Norris -Signed-off-by: David Woodhouse ---- - drivers/mtd/nand/pxa3xx_nand.c | 34 ++++++++++++++++++++++++++++++++++ - 1 file changed, 34 insertions(+) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -25,7 +25,14 @@ - #include - #include - -+#if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP) -+#define ARCH_HAS_DMA -+#endif -+ -+#ifdef ARCH_HAS_DMA - #include -+#endif -+ - #include - - #define CHIP_DELAY_TIMEOUT (2 * HZ/10) -@@ -381,6 +388,7 @@ static void handle_data_pio(struct pxa3x - } - } - -+#ifdef ARCH_HAS_DMA - static void start_data_dma(struct pxa3xx_nand_info *info) - { - struct pxa_dma_desc *desc = info->data_desc; -@@ -427,6 +435,10 @@ static void pxa3xx_nand_data_dma_irq(int - enable_int(info, NDCR_INT_MASK); - nand_writel(info, NDSR, NDSR_WRDREQ | NDSR_RDDREQ); - } -+#else -+static void start_data_dma(struct pxa3xx_nand_info *info) -+{} -+#endif - - static irqreturn_t pxa3xx_nand_irq(int irq, void *devid) - { -@@ -905,6 +917,7 @@ static int pxa3xx_nand_detect_config(str - */ - #define MAX_BUFF_SIZE PAGE_SIZE - -+#ifdef ARCH_HAS_DMA - static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info) - { - struct platform_device *pdev = info->pdev; -@@ -950,6 +963,20 @@ static void pxa3xx_nand_free_buff(struct - kfree(info->data_buff); - } - } -+#else -+static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info) -+{ -+ info->data_buff = kmalloc(MAX_BUFF_SIZE, GFP_KERNEL); -+ if (info->data_buff == NULL) -+ return -ENOMEM; -+ return 0; -+} -+ -+static void pxa3xx_nand_free_buff(struct pxa3xx_nand_info *info) -+{ -+ kfree(info->data_buff); -+} -+#endif - - static int pxa3xx_nand_sensing(struct pxa3xx_nand_info *info) - { -@@ -1265,6 +1292,13 @@ static int pxa3xx_nand_probe(struct plat - struct pxa3xx_nand_info *info; - int ret, cs, probe_success; - -+#ifndef ARCH_HAS_DMA -+ if (use_dma) { -+ use_dma = 0; -+ dev_warn(&pdev->dev, -+ "This platform can't do DMA on this device\n"); -+ } -+#endif - ret = pxa3xx_nand_probe_dt(pdev); - if (ret) - return ret; diff --git a/target/linux/mvebu/patches-3.10/0124-mtd-nand-pxa3xx-Add-__maybe_unused-keyword-to-enable.patch b/target/linux/mvebu/patches-3.10/0124-mtd-nand-pxa3xx-Add-__maybe_unused-keyword-to-enable.patch deleted file mode 100644 index d985f9ae62..0000000000 --- a/target/linux/mvebu/patches-3.10/0124-mtd-nand-pxa3xx-Add-__maybe_unused-keyword-to-enable.patch +++ /dev/null @@ -1,33 +0,0 @@ -From d6d4e28e52f3cd70f60d03405181994a2763532b Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Mon, 12 Aug 2013 14:14:57 -0300 -Subject: [PATCH 124/203] mtd: nand: pxa3xx: Add __maybe_unused keyword to - enable_int() - -Now that we have added ARCH_HAS_DMA conditional the function -enable_int() may be unused. Declare it as __maybe_unused, -in order to remove the following warning, when the function is not used: - -drivers/mtd/nand//pxa3xx_nand.c:343:24: warning: 'enable_int' defined -but not used [-Wunused-function] - -Signed-off-by: Ezequiel Garcia -Tested-by: Daniel Mack -Signed-off-by: Brian Norris -Signed-off-by: David Woodhouse ---- - drivers/mtd/nand/pxa3xx_nand.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -348,7 +348,8 @@ static void pxa3xx_nand_stop(struct pxa3 - nand_writel(info, NDSR, NDSR_MASK); - } - --static void enable_int(struct pxa3xx_nand_info *info, uint32_t int_mask) -+static void __maybe_unused -+enable_int(struct pxa3xx_nand_info *info, uint32_t int_mask) - { - uint32_t ndcr; - diff --git a/target/linux/mvebu/patches-3.10/0125-mtd-nand-pxa3xx-Allow-devices-with-no-dma-resources.patch b/target/linux/mvebu/patches-3.10/0125-mtd-nand-pxa3xx-Allow-devices-with-no-dma-resources.patch deleted file mode 100644 index 3c57e87492..0000000000 --- a/target/linux/mvebu/patches-3.10/0125-mtd-nand-pxa3xx-Allow-devices-with-no-dma-resources.patch +++ /dev/null @@ -1,78 +0,0 @@ -From c26369f5b9929e1187ccf716d6d1678196ec0b4f Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Mon, 12 Aug 2013 14:14:58 -0300 -Subject: [PATCH 125/203] mtd: nand: pxa3xx: Allow devices with no dma - resources - -When use_dma=0 there's no point in requesting resources for dma, -since they won't be used anyway. Therefore we remove that requirement, -therefore allowing devices without dma to pass the driver probe. - -Signed-off-by: Ezequiel Garcia -Tested-by: Daniel Mack -Signed-off-by: Brian Norris -Signed-off-by: David Woodhouse ---- - drivers/mtd/nand/pxa3xx_nand.c | 51 +++++++++++++++++++++++------------------- - 1 file changed, 28 insertions(+), 23 deletions(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -1141,30 +1141,35 @@ static int alloc_nand_resource(struct pl - if (ret < 0) - return ret; - -- /* -- * This is a dirty hack to make this driver work from devicetree -- * bindings. It can be removed once we have a prober DMA controller -- * framework for DT. -- */ -- if (pdev->dev.of_node && of_machine_is_compatible("marvell,pxa3xx")) { -- info->drcmr_dat = 97; -- info->drcmr_cmd = 99; -- } else { -- r = platform_get_resource(pdev, IORESOURCE_DMA, 0); -- if (r == NULL) { -- dev_err(&pdev->dev, "no resource defined for data DMA\n"); -- ret = -ENXIO; -- goto fail_disable_clk; -- } -- info->drcmr_dat = r->start; -+ if (use_dma) { -+ /* -+ * This is a dirty hack to make this driver work from -+ * devicetree bindings. It can be removed once we have -+ * a prober DMA controller framework for DT. -+ */ -+ if (pdev->dev.of_node && -+ of_machine_is_compatible("marvell,pxa3xx")) { -+ info->drcmr_dat = 97; -+ info->drcmr_cmd = 99; -+ } else { -+ r = platform_get_resource(pdev, IORESOURCE_DMA, 0); -+ if (r == NULL) { -+ dev_err(&pdev->dev, -+ "no resource defined for data DMA\n"); -+ ret = -ENXIO; -+ goto fail_disable_clk; -+ } -+ info->drcmr_dat = r->start; - -- r = platform_get_resource(pdev, IORESOURCE_DMA, 1); -- if (r == NULL) { -- dev_err(&pdev->dev, "no resource defined for command DMA\n"); -- ret = -ENXIO; -- goto fail_disable_clk; -+ r = platform_get_resource(pdev, IORESOURCE_DMA, 1); -+ if (r == NULL) { -+ dev_err(&pdev->dev, -+ "no resource defined for cmd DMA\n"); -+ ret = -ENXIO; -+ goto fail_disable_clk; -+ } -+ info->drcmr_cmd = r->start; - } -- info->drcmr_cmd = r->start; - } - - irq = platform_get_irq(pdev, 0); diff --git a/target/linux/mvebu/patches-3.10/0126-mtd-nand-pxa3xx-Remove-unneeded-ifdef-CONFIG_OF.patch b/target/linux/mvebu/patches-3.10/0126-mtd-nand-pxa3xx-Remove-unneeded-ifdef-CONFIG_OF.patch deleted file mode 100644 index 4a3cc54f9b..0000000000 --- a/target/linux/mvebu/patches-3.10/0126-mtd-nand-pxa3xx-Remove-unneeded-ifdef-CONFIG_OF.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 1fea4cca22fcb1045a0c1ad42df793e3ea29b5bf Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Mon, 12 Aug 2013 14:14:46 -0300 -Subject: [PATCH 126/203] mtd: nand: pxa3xx: Remove unneeded ifdef CONFIG_OF - -There's no need to enclose this code within idef CONFIG_OF, -because the OF framework provides no-op stubs if CONFIG_OF=n. - -Cc: devicetree@vger.kernel.org -Signed-off-by: Ezequiel Garcia -Signed-off-by: Brian Norris -Signed-off-by: Olof Johansson ---- - drivers/mtd/nand/pxa3xx_nand.c | 7 ------- - 1 file changed, 7 deletions(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -1236,7 +1236,6 @@ static int pxa3xx_nand_remove(struct pla - return 0; - } - --#ifdef CONFIG_OF - static struct of_device_id pxa3xx_nand_dt_ids[] = { - { - .compatible = "marvell,pxa3xx-nand", -@@ -1284,12 +1283,6 @@ static int pxa3xx_nand_probe_dt(struct p - - return 0; - } --#else --static inline int pxa3xx_nand_probe_dt(struct platform_device *pdev) --{ -- return 0; --} --#endif - - static int pxa3xx_nand_probe(struct platform_device *pdev) - { diff --git a/target/linux/mvebu/patches-3.10/0127-mtd-nand-pxa3xx-Fix-registered-MTD-name.patch b/target/linux/mvebu/patches-3.10/0127-mtd-nand-pxa3xx-Fix-registered-MTD-name.patch deleted file mode 100644 index b6ae3e62bc..0000000000 --- a/target/linux/mvebu/patches-3.10/0127-mtd-nand-pxa3xx-Fix-registered-MTD-name.patch +++ /dev/null @@ -1,48 +0,0 @@ -From fe013a7a5667763bde164dd5c9341ee5361a9c23 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Sat, 19 Oct 2013 18:19:25 -0300 -Subject: [PATCH 127/203] mtd: nand: pxa3xx: Fix registered MTD name - -In a recent commit: - - commit f455578dd961087a5cf94730d9f6489bb1d355f0 - Author: Ezequiel Garcia - Date: Mon Aug 12 14:14:53 2013 -0300 - - mtd: nand: pxa3xx: Remove hardcoded mtd name - - There's no advantage in using a hardcoded name for the mtd device. - Instead use the provided by the platform_device. - -The MTD name was changed to use the one provided by the platform_device. -However, this can be problematic as some users want to set partitions -using the kernel parameter 'mtdparts', where the name is needed. - -Therefore, to avoid regressions in users relying in 'mtdparts' we revert -the change and use the previous one 'pxa3xx_nand-0'. - -While at it, let's put a big comment and prevent this change from happening -ever again. - -Signed-off-by: Ezequiel Garcia -Signed-off-by: Brian Norris ---- - drivers/mtd/nand/pxa3xx_nand.c | 7 ++++++- - 1 file changed, 6 insertions(+), 1 deletion(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -1320,7 +1320,12 @@ static int pxa3xx_nand_probe(struct plat - for (cs = 0; cs < pdata->num_cs; cs++) { - struct mtd_info *mtd = info->host[cs]->mtd; - -- mtd->name = pdev->name; -+ /* -+ * The mtd name matches the one used in 'mtdparts' kernel -+ * parameter. This name cannot be changed or otherwise -+ * user's mtd partitions configuration would get broken. -+ */ -+ mtd->name = "pxa3xx_nand-0"; - info->cs = cs; - ret = pxa3xx_nand_scan(mtd); - if (ret) { diff --git a/target/linux/mvebu/patches-3.10/0128-mtd-nand-pxa3xx_nand-Remove-redundant-of_match_ptr.patch b/target/linux/mvebu/patches-3.10/0128-mtd-nand-pxa3xx_nand-Remove-redundant-of_match_ptr.patch deleted file mode 100644 index a0c4e6995f..0000000000 --- a/target/linux/mvebu/patches-3.10/0128-mtd-nand-pxa3xx_nand-Remove-redundant-of_match_ptr.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 38a6d3f3330da6586695746a0a85a96143171211 Mon Sep 17 00:00:00 2001 -From: Sachin Kamat -Date: Mon, 30 Sep 2013 15:10:24 +0530 -Subject: [PATCH 128/203] mtd: nand: pxa3xx_nand: Remove redundant of_match_ptr - -The data structure of_match_ptr() protects is always compiled in. -Hence of_match_ptr() is not needed. - -Signed-off-by: Sachin Kamat -Signed-off-by: Brian Norris ---- - drivers/mtd/nand/pxa3xx_nand.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -1412,7 +1412,7 @@ static int pxa3xx_nand_resume(struct pla - static struct platform_driver pxa3xx_nand_driver = { - .driver = { - .name = "pxa3xx-nand", -- .of_match_table = of_match_ptr(pxa3xx_nand_dt_ids), -+ .of_match_table = pxa3xx_nand_dt_ids, - }, - .probe = pxa3xx_nand_probe, - .remove = pxa3xx_nand_remove, diff --git a/target/linux/mvebu/patches-3.10/0129-mtd-nand-pxa3xx-Move-DMA-I-O-enabling.patch b/target/linux/mvebu/patches-3.10/0129-mtd-nand-pxa3xx-Move-DMA-I-O-enabling.patch deleted file mode 100644 index 0c95a61b97..0000000000 --- a/target/linux/mvebu/patches-3.10/0129-mtd-nand-pxa3xx-Move-DMA-I-O-enabling.patch +++ /dev/null @@ -1,40 +0,0 @@ -From 18166290599760e8ff1b6c0389834beafd09a517 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Fri, 4 Oct 2013 15:30:37 -0300 -Subject: [PATCH 129/203] mtd: nand: pxa3xx: Move DMA I/O enabling - -Instead of setting info->dma each time a command is prepared, -we can move it after the DMA buffers are allocated. - -This is more clear and it's the proper place to enable this, given -DMA cannot be turned on and off during runtime. - -Signed-off-by: Ezequiel Garcia -Tested-by: Daniel Mack -Signed-off-by: Brian Norris ---- - drivers/mtd/nand/pxa3xx_nand.c | 6 +++++- - 1 file changed, 5 insertions(+), 1 deletion(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -540,7 +540,6 @@ static int prepare_command_pool(struct p - info->oob_size = 0; - info->use_ecc = 0; - info->use_spare = 1; -- info->use_dma = (use_dma) ? 1 : 0; - info->is_ready = 0; - info->retcode = ERR_NONE; - if (info->cs != 0) -@@ -950,6 +949,11 @@ static int pxa3xx_nand_init_buff(struct - return info->data_dma_ch; - } - -+ /* -+ * Now that DMA buffers are allocated we turn on -+ * DMA proper for I/O operations. -+ */ -+ info->use_dma = 1; - return 0; - } - diff --git a/target/linux/mvebu/patches-3.10/0130-mtd-nand-pxa3xx-Allocate-data-buffer-on-detected-fla.patch b/target/linux/mvebu/patches-3.10/0130-mtd-nand-pxa3xx-Allocate-data-buffer-on-detected-fla.patch deleted file mode 100644 index 09f022b967..0000000000 --- a/target/linux/mvebu/patches-3.10/0130-mtd-nand-pxa3xx-Allocate-data-buffer-on-detected-fla.patch +++ /dev/null @@ -1,143 +0,0 @@ -From 71d6267980d7590e38059a784785ca158e361f87 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Fri, 4 Oct 2013 15:30:38 -0300 -Subject: [PATCH 130/203] mtd: nand: pxa3xx: Allocate data buffer on detected - flash size - -This commit replaces the currently hardcoded buffer size, by a -dynamic detection scheme. First a small 256 bytes buffer is allocated -so the device can be detected (using READID and friends commands). - -After detection, this buffer is released and a new buffer is allocated -to acommodate the page size plus out-of-band size. - -Signed-off-by: Ezequiel Garcia -Tested-by: Daniel Mack -Signed-off-by: Brian Norris ---- - drivers/mtd/nand/pxa3xx_nand.c | 45 ++++++++++++++++++++++++++++-------------- - 1 file changed, 30 insertions(+), 15 deletions(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -39,6 +39,13 @@ - #define NAND_STOP_DELAY (2 * HZ/50) - #define PAGE_CHUNK_SIZE (2048) - -+/* -+ * Define a buffer size for the initial command that detects the flash device: -+ * STATUS, READID and PARAM. The largest of these is the PARAM command, -+ * needing 256 bytes. -+ */ -+#define INIT_BUFFER_SIZE 256 -+ - /* registers and bit definitions */ - #define NDCR (0x00) /* Control register */ - #define NDTR0CS0 (0x04) /* Timing Parameter 0 for CS0 */ -@@ -164,6 +171,7 @@ struct pxa3xx_nand_info { - - unsigned int buf_start; - unsigned int buf_count; -+ unsigned int buf_size; - - /* DMA information */ - int drcmr_dat; -@@ -911,26 +919,20 @@ static int pxa3xx_nand_detect_config(str - return 0; - } - --/* the maximum possible buffer size for large page with OOB data -- * is: 2048 + 64 = 2112 bytes, allocate a page here for both the -- * data buffer and the DMA descriptor -- */ --#define MAX_BUFF_SIZE PAGE_SIZE -- - #ifdef ARCH_HAS_DMA - static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info) - { - struct platform_device *pdev = info->pdev; -- int data_desc_offset = MAX_BUFF_SIZE - sizeof(struct pxa_dma_desc); -+ int data_desc_offset = info->buf_size - sizeof(struct pxa_dma_desc); - - if (use_dma == 0) { -- info->data_buff = kmalloc(MAX_BUFF_SIZE, GFP_KERNEL); -+ info->data_buff = kmalloc(info->buf_size, GFP_KERNEL); - if (info->data_buff == NULL) - return -ENOMEM; - return 0; - } - -- info->data_buff = dma_alloc_coherent(&pdev->dev, MAX_BUFF_SIZE, -+ info->data_buff = dma_alloc_coherent(&pdev->dev, info->buf_size, - &info->data_buff_phys, GFP_KERNEL); - if (info->data_buff == NULL) { - dev_err(&pdev->dev, "failed to allocate dma buffer\n"); -@@ -944,7 +946,7 @@ static int pxa3xx_nand_init_buff(struct - pxa3xx_nand_data_dma_irq, info); - if (info->data_dma_ch < 0) { - dev_err(&pdev->dev, "failed to request data dma\n"); -- dma_free_coherent(&pdev->dev, MAX_BUFF_SIZE, -+ dma_free_coherent(&pdev->dev, info->buf_size, - info->data_buff, info->data_buff_phys); - return info->data_dma_ch; - } -@@ -962,7 +964,7 @@ static void pxa3xx_nand_free_buff(struct - struct platform_device *pdev = info->pdev; - if (use_dma) { - pxa_free_dma(info->data_dma_ch); -- dma_free_coherent(&pdev->dev, MAX_BUFF_SIZE, -+ dma_free_coherent(&pdev->dev, info->buf_size, - info->data_buff, info->data_buff_phys); - } else { - kfree(info->data_buff); -@@ -971,7 +973,7 @@ static void pxa3xx_nand_free_buff(struct - #else - static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info) - { -- info->data_buff = kmalloc(MAX_BUFF_SIZE, GFP_KERNEL); -+ info->data_buff = kmalloc(info->buf_size, GFP_KERNEL); - if (info->data_buff == NULL) - return -ENOMEM; - return 0; -@@ -1085,7 +1087,16 @@ KEEP_CONFIG: - else - host->col_addr_cycles = 1; - -+ /* release the initial buffer */ -+ kfree(info->data_buff); -+ -+ /* allocate the real data + oob buffer */ -+ info->buf_size = mtd->writesize + mtd->oobsize; -+ ret = pxa3xx_nand_init_buff(info); -+ if (ret) -+ return ret; - info->oob_buff = info->data_buff + mtd->writesize; -+ - if ((mtd->size >> chip->page_shift) > 65536) - host->row_addr_cycles = 3; - else -@@ -1191,9 +1202,13 @@ static int alloc_nand_resource(struct pl - } - info->mmio_phys = r->start; - -- ret = pxa3xx_nand_init_buff(info); -- if (ret) -+ /* Allocate a buffer to allow flash detection */ -+ info->buf_size = INIT_BUFFER_SIZE; -+ info->data_buff = kmalloc(info->buf_size, GFP_KERNEL); -+ if (info->data_buff == NULL) { -+ ret = -ENOMEM; - goto fail_disable_clk; -+ } - - /* initialize all interrupts to be disabled */ - disable_int(info, NDSR_MASK); -@@ -1211,7 +1226,7 @@ static int alloc_nand_resource(struct pl - - fail_free_buf: - free_irq(irq, info); -- pxa3xx_nand_free_buff(info); -+ kfree(info->data_buff); - fail_disable_clk: - clk_disable_unprepare(info->clk); - return ret; diff --git a/target/linux/mvebu/patches-3.10/0131-mtd-nand-remove-deprecated-IRQF_DISABLED.patch b/target/linux/mvebu/patches-3.10/0131-mtd-nand-remove-deprecated-IRQF_DISABLED.patch deleted file mode 100644 index 6cecbf2c88..0000000000 --- a/target/linux/mvebu/patches-3.10/0131-mtd-nand-remove-deprecated-IRQF_DISABLED.patch +++ /dev/null @@ -1,27 +0,0 @@ -From e3779fc4a84e1c51c061e3e13b1abf1c9a56a2cd Mon Sep 17 00:00:00 2001 -From: Michael Opdenacker -Date: Sun, 13 Oct 2013 08:21:32 +0200 -Subject: [PATCH 131/203] mtd: nand: remove deprecated IRQF_DISABLED - -This patch proposes to remove the use of the IRQF_DISABLED flag - -It's a NOOP since 2.6.35 and it will be removed one day. - -Signed-off-by: Michael Opdenacker -Signed-off-by: Brian Norris ---- - drivers/mtd/nand/pxa3xx_nand.c | 3 +-- - 1 file changed, 1 insertion(+), 2 deletions(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -1213,8 +1213,7 @@ static int alloc_nand_resource(struct pl - /* initialize all interrupts to be disabled */ - disable_int(info, NDSR_MASK); - -- ret = request_irq(irq, pxa3xx_nand_irq, IRQF_DISABLED, -- pdev->name, info); -+ ret = request_irq(irq, pxa3xx_nand_irq, 0, pdev->name, info); - if (ret < 0) { - dev_err(&pdev->dev, "failed to request IRQ\n"); - goto fail_free_buf; diff --git a/target/linux/mvebu/patches-3.10/0132-mtd-nand-pxa3xx-Add-documentation-about-the-controll.patch b/target/linux/mvebu/patches-3.10/0132-mtd-nand-pxa3xx-Add-documentation-about-the-controll.patch deleted file mode 100644 index 561c7d7d74..0000000000 --- a/target/linux/mvebu/patches-3.10/0132-mtd-nand-pxa3xx-Add-documentation-about-the-controll.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 54c1163b143e4ed911b8dddc0829c87f93b3debd Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Thu, 7 Nov 2013 12:17:10 -0300 -Subject: [PATCH 132/203] mtd: nand: pxa3xx: Add documentation about the - controller - -Given there's no public specification to this date, and in order -to capture some important details and singularities about the -controller let's document them once and for good. - -Cc: linux-doc@vger.kernel.org -Signed-off-by: Ezequiel Garcia -Signed-off-by: Brian Norris ---- - drivers/mtd/nand/pxa3xx_nand.c | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -7,6 +7,8 @@ - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -+ * -+ * See Documentation/mtd/nand/pxa3xx-nand.txt for more details. - */ - - #include diff --git a/target/linux/mvebu/patches-3.10/0133-mtd-nand-pxa3xx-Prevent-sub-page-writes.patch b/target/linux/mvebu/patches-3.10/0133-mtd-nand-pxa3xx-Prevent-sub-page-writes.patch deleted file mode 100644 index 1af6da297f..0000000000 --- a/target/linux/mvebu/patches-3.10/0133-mtd-nand-pxa3xx-Prevent-sub-page-writes.patch +++ /dev/null @@ -1,25 +0,0 @@ -From ec1977c2873dc7f0e6cec3edb8c30d92882f65d1 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Thu, 7 Nov 2013 12:17:12 -0300 -Subject: [PATCH 133/203] mtd: nand: pxa3xx: Prevent sub-page writes - -The current driver doesn't support sub-page writing, so report -that to the NAND core. - -Signed-off-by: Ezequiel Garcia -Tested-by: Daniel Mack -Signed-off-by: Brian Norris ---- - drivers/mtd/nand/pxa3xx_nand.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -1145,6 +1145,7 @@ static int alloc_nand_resource(struct pl - chip->read_byte = pxa3xx_nand_read_byte; - chip->read_buf = pxa3xx_nand_read_buf; - chip->write_buf = pxa3xx_nand_write_buf; -+ chip->options |= NAND_NO_SUBPAGE_WRITE; - } - - spin_lock_init(&chip->controller->lock); diff --git a/target/linux/mvebu/patches-3.10/0134-mtd-nand-pxa3xx-read_page-returns-max_bitflips.patch b/target/linux/mvebu/patches-3.10/0134-mtd-nand-pxa3xx-read_page-returns-max_bitflips.patch deleted file mode 100644 index afb81720c0..0000000000 --- a/target/linux/mvebu/patches-3.10/0134-mtd-nand-pxa3xx-read_page-returns-max_bitflips.patch +++ /dev/null @@ -1,42 +0,0 @@ -From 97598678602aaea473303523ce37a45d258206ca Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Thu, 7 Nov 2013 12:17:13 -0300 -Subject: [PATCH 134/203] mtd: nand: pxa3xx: read_page() returns max_bitflips - -As per the ecc.read_page() prototype, we must return the maximum number -of bitflips that were corrected on any one region covering an ecc step. - -Signed-off-by: Ezequiel Garcia -Tested-by: Daniel Mack -Signed-off-by: Brian Norris ---- - drivers/mtd/nand/pxa3xx_nand.c | 4 +++- - 1 file changed, 3 insertions(+), 1 deletion(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -751,6 +751,7 @@ static int pxa3xx_nand_read_page_hwecc(s - { - struct pxa3xx_nand_host *host = mtd->priv; - struct pxa3xx_nand_info *info = host->info_data; -+ int max_bitflips = 0; - - chip->read_buf(mtd, buf, mtd->writesize); - chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); -@@ -758,6 +759,7 @@ static int pxa3xx_nand_read_page_hwecc(s - if (info->retcode == ERR_SBERR) { - switch (info->use_ecc) { - case 1: -+ max_bitflips = 1; - mtd->ecc_stats.corrected++; - break; - case 0: -@@ -776,7 +778,7 @@ static int pxa3xx_nand_read_page_hwecc(s - mtd->ecc_stats.failed++; - } - -- return 0; -+ return max_bitflips; - } - - static uint8_t pxa3xx_nand_read_byte(struct mtd_info *mtd) diff --git a/target/linux/mvebu/patches-3.10/0135-mtd-nand-pxa3xx-Early-variant-detection.patch b/target/linux/mvebu/patches-3.10/0135-mtd-nand-pxa3xx-Early-variant-detection.patch deleted file mode 100644 index 328a2ab900..0000000000 --- a/target/linux/mvebu/patches-3.10/0135-mtd-nand-pxa3xx-Early-variant-detection.patch +++ /dev/null @@ -1,97 +0,0 @@ -From dc333ddda677d416a6726509e144c6dfb93e7e89 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Thu, 7 Nov 2013 12:17:14 -0300 -Subject: [PATCH 135/203] mtd: nand: pxa3xx: Early variant detection - -In order to customize early settings depending on the detected SoC variant, -move the detection to be before the nand_chip struct filling. - -In a follow-up patch, this change is needed to detect the variant *before* -the call to alloc_nand_resource(), which allows to set a different cmdfunc() -for each variant. - -Signed-off-by: Ezequiel Garcia -Tested-by: Daniel Mack -Signed-off-by: Brian Norris ---- - drivers/mtd/nand/pxa3xx_nand.c | 48 +++++++++++++++++++++--------------------- - 1 file changed, 24 insertions(+), 24 deletions(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -258,6 +258,29 @@ static struct pxa3xx_nand_flash builtin_ - /* convert nano-seconds to nand flash controller clock cycles */ - #define ns2cycle(ns, clk) (int)((ns) * (clk / 1000000) / 1000) - -+static struct of_device_id pxa3xx_nand_dt_ids[] = { -+ { -+ .compatible = "marvell,pxa3xx-nand", -+ .data = (void *)PXA3XX_NAND_VARIANT_PXA, -+ }, -+ { -+ .compatible = "marvell,armada370-nand", -+ .data = (void *)PXA3XX_NAND_VARIANT_ARMADA370, -+ }, -+ {} -+}; -+MODULE_DEVICE_TABLE(of, pxa3xx_nand_dt_ids); -+ -+static enum pxa3xx_nand_variant -+pxa3xx_nand_get_variant(struct platform_device *pdev) -+{ -+ const struct of_device_id *of_id = -+ of_match_device(pxa3xx_nand_dt_ids, &pdev->dev); -+ if (!of_id) -+ return PXA3XX_NAND_VARIANT_PXA; -+ return (enum pxa3xx_nand_variant)of_id->data; -+} -+ - static void pxa3xx_nand_set_timing(struct pxa3xx_nand_host *host, - const struct pxa3xx_nand_timing *t) - { -@@ -1125,6 +1148,7 @@ static int alloc_nand_resource(struct pl - return -ENOMEM; - - info->pdev = pdev; -+ info->variant = pxa3xx_nand_get_variant(pdev); - for (cs = 0; cs < pdata->num_cs; cs++) { - mtd = (struct mtd_info *)((unsigned int)&info[1] + - (sizeof(*mtd) + sizeof(*host)) * cs); -@@ -1259,29 +1283,6 @@ static int pxa3xx_nand_remove(struct pla - return 0; - } - --static struct of_device_id pxa3xx_nand_dt_ids[] = { -- { -- .compatible = "marvell,pxa3xx-nand", -- .data = (void *)PXA3XX_NAND_VARIANT_PXA, -- }, -- { -- .compatible = "marvell,armada370-nand", -- .data = (void *)PXA3XX_NAND_VARIANT_ARMADA370, -- }, -- {} --}; --MODULE_DEVICE_TABLE(of, pxa3xx_nand_dt_ids); -- --static enum pxa3xx_nand_variant --pxa3xx_nand_get_variant(struct platform_device *pdev) --{ -- const struct of_device_id *of_id = -- of_match_device(pxa3xx_nand_dt_ids, &pdev->dev); -- if (!of_id) -- return PXA3XX_NAND_VARIANT_PXA; -- return (enum pxa3xx_nand_variant)of_id->data; --} -- - static int pxa3xx_nand_probe_dt(struct platform_device *pdev) - { - struct pxa3xx_nand_platform_data *pdata; -@@ -1338,7 +1339,6 @@ static int pxa3xx_nand_probe(struct plat - } - - info = platform_get_drvdata(pdev); -- info->variant = pxa3xx_nand_get_variant(pdev); - probe_success = 0; - for (cs = 0; cs < pdata->num_cs; cs++) { - struct mtd_info *mtd = info->host[cs]->mtd; diff --git a/target/linux/mvebu/patches-3.10/0136-mtd-nand-pxa3xx-Use-chip-cmdfunc-instead-of-the-inte.patch b/target/linux/mvebu/patches-3.10/0136-mtd-nand-pxa3xx-Use-chip-cmdfunc-instead-of-the-inte.patch deleted file mode 100644 index de79b8d28d..0000000000 --- a/target/linux/mvebu/patches-3.10/0136-mtd-nand-pxa3xx-Use-chip-cmdfunc-instead-of-the-inte.patch +++ /dev/null @@ -1,41 +0,0 @@ -From 67ab922e1e292494732a10f367d3de47338639ac Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Thu, 7 Nov 2013 12:17:15 -0300 -Subject: [PATCH 136/203] mtd: nand: pxa3xx: Use chip->cmdfunc instead of the - internal - -Whenever possible, it's always better to use the generic chip->cmdfunc -instead of the internal pxa3xx_nand_cmdfunc(). -In this particular case, this will allow to have multiple cmdfunc() -implementations for different SoC variants. - -Reviewed-by: Huang Shijie -Signed-off-by: Ezequiel Garcia -Tested-by: Daniel Mack -Signed-off-by: Brian Norris ---- - drivers/mtd/nand/pxa3xx_nand.c | 6 +++++- - 1 file changed, 5 insertions(+), 1 deletion(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -1015,14 +1015,18 @@ static void pxa3xx_nand_free_buff(struct - static int pxa3xx_nand_sensing(struct pxa3xx_nand_info *info) - { - struct mtd_info *mtd; -+ struct nand_chip *chip; - int ret; -+ - mtd = info->host[info->cs]->mtd; -+ chip = mtd->priv; -+ - /* use the common timing to make a try */ - ret = pxa3xx_nand_config_flash(info, &builtin_flash_types[0]); - if (ret) - return ret; - -- pxa3xx_nand_cmdfunc(mtd, NAND_CMD_RESET, 0, 0); -+ chip->cmdfunc(mtd, NAND_CMD_RESET, 0, 0); - if (info->is_ready) - return 0; - diff --git a/target/linux/mvebu/patches-3.10/0137-mtd-nand-pxa3xx-Split-FIFO-size-from-to-be-read-FIFO.patch b/target/linux/mvebu/patches-3.10/0137-mtd-nand-pxa3xx-Split-FIFO-size-from-to-be-read-FIFO.patch deleted file mode 100644 index e00921d40f..0000000000 --- a/target/linux/mvebu/patches-3.10/0137-mtd-nand-pxa3xx-Split-FIFO-size-from-to-be-read-FIFO.patch +++ /dev/null @@ -1,74 +0,0 @@ -From 496f307424d3958ef43ad06ae6a0be98ede2a92c Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Thu, 7 Nov 2013 12:17:16 -0300 -Subject: [PATCH 137/203] mtd: nand: pxa3xx: Split FIFO size from to-be-read - FIFO count - -Introduce a fifo_size field to represent the size of the controller's -FIFO buffer, and use it to distinguish that size from the amount -of data bytes to be read from the FIFO. - -This is important to support devices with pages larger than the -controller's internal FIFO, that need to read the pages in FIFO-sized -chunks. - -In particular, the current code is at least confusing, for it mixes -all the different sizes involved: FIFO size, page size and data size. - -This commit starts the cleaning by removing the info->page_size field -that is not currently used. The host->page_size field should also -be removed and use always mtd->writesize instead. Follow up commits -will clean this up. - -Signed-off-by: Ezequiel Garcia -Tested-by: Daniel Mack -Signed-off-by: Brian Norris ---- - drivers/mtd/nand/pxa3xx_nand.c | 12 +++++++----- - 1 file changed, 7 insertions(+), 5 deletions(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -201,8 +201,8 @@ struct pxa3xx_nand_info { - int use_spare; /* use spare ? */ - int is_ready; - -- unsigned int page_size; /* page size of attached chip */ -- unsigned int data_size; /* data size in FIFO */ -+ unsigned int fifo_size; /* max. data size in the FIFO */ -+ unsigned int data_size; /* data to be read from FIFO */ - unsigned int oob_size; - int retcode; - -@@ -307,16 +307,15 @@ static void pxa3xx_nand_set_timing(struc - - static void pxa3xx_set_datasize(struct pxa3xx_nand_info *info) - { -- struct pxa3xx_nand_host *host = info->host[info->cs]; - int oob_enable = info->reg_ndcr & NDCR_SPARE_EN; - -- info->data_size = host->page_size; -+ info->data_size = info->fifo_size; - if (!oob_enable) { - info->oob_size = 0; - return; - } - -- switch (host->page_size) { -+ switch (info->fifo_size) { - case 2048: - info->oob_size = (info->use_ecc) ? 40 : 64; - break; -@@ -933,9 +932,12 @@ static int pxa3xx_nand_detect_config(str - uint32_t ndcr = nand_readl(info, NDCR); - - if (ndcr & NDCR_PAGE_SZ) { -+ /* Controller's FIFO size */ -+ info->fifo_size = 2048; - host->page_size = 2048; - host->read_id_bytes = 4; - } else { -+ info->fifo_size = 512; - host->page_size = 512; - host->read_id_bytes = 2; - } diff --git a/target/linux/mvebu/patches-3.10/0138-mtd-nand-pxa3xx-Replace-host-page_size-by-mtd-writes.patch b/target/linux/mvebu/patches-3.10/0138-mtd-nand-pxa3xx-Replace-host-page_size-by-mtd-writes.patch deleted file mode 100644 index 259f6a0a39..0000000000 --- a/target/linux/mvebu/patches-3.10/0138-mtd-nand-pxa3xx-Replace-host-page_size-by-mtd-writes.patch +++ /dev/null @@ -1,72 +0,0 @@ -From ad40a597cbfeb2374c799ba6dad3a69f131511c8 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Thu, 7 Nov 2013 12:17:17 -0300 -Subject: [PATCH 138/203] mtd: nand: pxa3xx: Replace host->page_size by - mtd->writesize - -There's no need to privately store the device page size as it's -available in mtd structure field mtd->writesize. -Also, this removes the hardcoded page size value, leaving the -auto-detected value only. - -Signed-off-by: Ezequiel Garcia -Tested-by: Daniel Mack -Signed-off-by: Brian Norris ---- - drivers/mtd/nand/pxa3xx_nand.c | 10 +++------- - 1 file changed, 3 insertions(+), 7 deletions(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -151,7 +151,6 @@ struct pxa3xx_nand_host { - void *info_data; - - /* page size of attached chip */ -- unsigned int page_size; - int use_ecc; - int cs; - -@@ -614,12 +613,12 @@ static int prepare_command_pool(struct p - info->buf_start += mtd->writesize; - - /* Second command setting for large pages */ -- if (host->page_size >= PAGE_CHUNK_SIZE) -+ if (mtd->writesize >= PAGE_CHUNK_SIZE) - info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8); - - case NAND_CMD_SEQIN: - /* small page addr setting */ -- if (unlikely(host->page_size < PAGE_CHUNK_SIZE)) { -+ if (unlikely(mtd->writesize < PAGE_CHUNK_SIZE)) { - info->ndcb1 = ((page_addr & 0xFFFFFF) << 8) - | (column & 0xFF); - -@@ -895,7 +894,6 @@ static int pxa3xx_nand_config_flash(stru - } - - /* calculate flash information */ -- host->page_size = f->page_size; - host->read_id_bytes = (f->page_size == 2048) ? 4 : 2; - - /* calculate addressing information */ -@@ -934,11 +932,9 @@ static int pxa3xx_nand_detect_config(str - if (ndcr & NDCR_PAGE_SZ) { - /* Controller's FIFO size */ - info->fifo_size = 2048; -- host->page_size = 2048; - host->read_id_bytes = 4; - } else { - info->fifo_size = 512; -- host->page_size = 512; - host->read_id_bytes = 2; - } - -@@ -1106,7 +1102,7 @@ static int pxa3xx_nand_scan(struct mtd_i - def = pxa3xx_flash_ids; - KEEP_CONFIG: - chip->ecc.mode = NAND_ECC_HW; -- chip->ecc.size = host->page_size; -+ chip->ecc.size = info->fifo_size; - chip->ecc.strength = 1; - - if (info->reg_ndcr & NDCR_DWIDTH_M) diff --git a/target/linux/mvebu/patches-3.10/0139-mtd-nand-pxa3xx-Add-a-nice-comment-to-pxa3xx_set_dat.patch b/target/linux/mvebu/patches-3.10/0139-mtd-nand-pxa3xx-Add-a-nice-comment-to-pxa3xx_set_dat.patch deleted file mode 100644 index aeecae6218..0000000000 --- a/target/linux/mvebu/patches-3.10/0139-mtd-nand-pxa3xx-Add-a-nice-comment-to-pxa3xx_set_dat.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 8bce53e42f78e009fbfbd4a98ea98f66e6cd5b4c Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Thu, 7 Nov 2013 12:17:18 -0300 -Subject: [PATCH 139/203] mtd: nand: pxa3xx: Add a nice comment to - pxa3xx_set_datasize() - -Add a comment clarifying the use of pxa3xx_set_datasize() which is only -applicable on data read/write commands (i.e. commands with a data cycle, -such as READID, READ0, STATUS, etc.) - -Signed-off-by: Ezequiel Garcia -Signed-off-by: Brian Norris ---- - drivers/mtd/nand/pxa3xx_nand.c | 5 +++++ - 1 file changed, 5 insertions(+) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -304,6 +304,11 @@ static void pxa3xx_nand_set_timing(struc - nand_writel(info, NDTR1CS0, ndtr1); - } - -+/* -+ * Set the data and OOB size, depending on the selected -+ * spare and ECC configuration. -+ * Only applicable to READ0, READOOB and PAGEPROG commands. -+ */ - static void pxa3xx_set_datasize(struct pxa3xx_nand_info *info) - { - int oob_enable = info->reg_ndcr & NDCR_SPARE_EN; diff --git a/target/linux/mvebu/patches-3.10/0140-mtd-nand-pxa3xx-Use-a-completion-to-signal-device-re.patch b/target/linux/mvebu/patches-3.10/0140-mtd-nand-pxa3xx-Use-a-completion-to-signal-device-re.patch deleted file mode 100644 index 7f5108fd2f..0000000000 --- a/target/linux/mvebu/patches-3.10/0140-mtd-nand-pxa3xx-Use-a-completion-to-signal-device-re.patch +++ /dev/null @@ -1,138 +0,0 @@ -From b5289e9cb18e6c254e13826e6bcfbfe95b819d77 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Thu, 14 Nov 2013 18:25:26 -0300 -Subject: [PATCH 140/203] mtd: nand: pxa3xx: Use a completion to signal device - ready - -The expected behavior of the waitfunc() NAND chip call is to wait -for the device to be READY (this is a standard chip line). -However, the current implementation does almost nothing, which opens -the possibility of issuing a command to a non-ready device. - -Fix this by adding a new completion to wait for the ready event to arrive. - -Signed-off-by: Ezequiel Garcia -Tested-by: Daniel Mack -Signed-off-by: Brian Norris ---- - drivers/mtd/nand/pxa3xx_nand.c | 38 ++++++++++++++++++++++++-------------- - 1 file changed, 24 insertions(+), 14 deletions(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -37,6 +37,7 @@ - - #include - -+#define NAND_DEV_READY_TIMEOUT 50 - #define CHIP_DELAY_TIMEOUT (2 * HZ/10) - #define NAND_STOP_DELAY (2 * HZ/50) - #define PAGE_CHUNK_SIZE (2048) -@@ -168,7 +169,7 @@ struct pxa3xx_nand_info { - struct clk *clk; - void __iomem *mmio_base; - unsigned long mmio_phys; -- struct completion cmd_complete; -+ struct completion cmd_complete, dev_ready; - - unsigned int buf_start; - unsigned int buf_count; -@@ -198,7 +199,7 @@ struct pxa3xx_nand_info { - int use_ecc; /* use HW ECC ? */ - int use_dma; /* use DMA ? */ - int use_spare; /* use spare ? */ -- int is_ready; -+ int need_wait; - - unsigned int fifo_size; /* max. data size in the FIFO */ - unsigned int data_size; /* data to be read from FIFO */ -@@ -480,7 +481,7 @@ static void start_data_dma(struct pxa3xx - static irqreturn_t pxa3xx_nand_irq(int irq, void *devid) - { - struct pxa3xx_nand_info *info = devid; -- unsigned int status, is_completed = 0; -+ unsigned int status, is_completed = 0, is_ready = 0; - unsigned int ready, cmd_done; - - if (info->cs == 0) { -@@ -516,8 +517,8 @@ static irqreturn_t pxa3xx_nand_irq(int i - is_completed = 1; - } - if (status & ready) { -- info->is_ready = 1; - info->state = STATE_READY; -+ is_ready = 1; - } - - if (status & NDSR_WRCMDREQ) { -@@ -546,6 +547,8 @@ static irqreturn_t pxa3xx_nand_irq(int i - nand_writel(info, NDSR, status); - if (is_completed) - complete(&info->cmd_complete); -+ if (is_ready) -+ complete(&info->dev_ready); - NORMAL_IRQ_EXIT: - return IRQ_HANDLED; - } -@@ -576,7 +579,6 @@ static int prepare_command_pool(struct p - info->oob_size = 0; - info->use_ecc = 0; - info->use_spare = 1; -- info->is_ready = 0; - info->retcode = ERR_NONE; - if (info->cs != 0) - info->ndcb0 = NDCB0_CSEL; -@@ -749,6 +751,8 @@ static void pxa3xx_nand_cmdfunc(struct m - exec_cmd = prepare_command_pool(info, command, column, page_addr); - if (exec_cmd) { - init_completion(&info->cmd_complete); -+ init_completion(&info->dev_ready); -+ info->need_wait = 1; - pxa3xx_nand_start(info); - - ret = wait_for_completion_timeout(&info->cmd_complete, -@@ -863,21 +867,27 @@ static int pxa3xx_nand_waitfunc(struct m - { - struct pxa3xx_nand_host *host = mtd->priv; - struct pxa3xx_nand_info *info = host->info_data; -+ int ret; -+ -+ if (info->need_wait) { -+ ret = wait_for_completion_timeout(&info->dev_ready, -+ CHIP_DELAY_TIMEOUT); -+ info->need_wait = 0; -+ if (!ret) { -+ dev_err(&info->pdev->dev, "Ready time out!!!\n"); -+ return NAND_STATUS_FAIL; -+ } -+ } - - /* pxa3xx_nand_send_command has waited for command complete */ - if (this->state == FL_WRITING || this->state == FL_ERASING) { - if (info->retcode == ERR_NONE) - return 0; -- else { -- /* -- * any error make it return 0x01 which will tell -- * the caller the erase and write fail -- */ -- return 0x01; -- } -+ else -+ return NAND_STATUS_FAIL; - } - -- return 0; -+ return NAND_STATUS_READY; - } - - static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info, -@@ -1030,7 +1040,7 @@ static int pxa3xx_nand_sensing(struct px - return ret; - - chip->cmdfunc(mtd, NAND_CMD_RESET, 0, 0); -- if (info->is_ready) -+ if (!info->need_wait) - return 0; - - return -ENODEV; diff --git a/target/linux/mvebu/patches-3.10/0141-mtd-nand-pxa3xx-Use-waitfunc-to-wait-for-the-device-.patch b/target/linux/mvebu/patches-3.10/0141-mtd-nand-pxa3xx-Use-waitfunc-to-wait-for-the-device-.patch deleted file mode 100644 index 13fdffe532..0000000000 --- a/target/linux/mvebu/patches-3.10/0141-mtd-nand-pxa3xx-Use-waitfunc-to-wait-for-the-device-.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 2a1254f505ca4d376eae81768e4d5d890b578d13 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Thu, 14 Nov 2013 18:25:27 -0300 -Subject: [PATCH 141/203] mtd: nand: pxa3xx: Use waitfunc() to wait for the - device to be ready - -In pxa3xx_nand_sensing() instead of simply using info->is_ready -after issuing a command, the correct way of checking is to wait -for the device to be ready through the chip's waitfunc(). - -Signed-off-by: Ezequiel Garcia -Tested-by: Daniel Mack -Signed-off-by: Brian Norris ---- - drivers/mtd/nand/pxa3xx_nand.c | 7 ++++--- - 1 file changed, 4 insertions(+), 3 deletions(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -1040,10 +1040,11 @@ static int pxa3xx_nand_sensing(struct px - return ret; - - chip->cmdfunc(mtd, NAND_CMD_RESET, 0, 0); -- if (!info->need_wait) -- return 0; -+ ret = chip->waitfunc(mtd, chip); -+ if (ret & NAND_STATUS_FAIL) -+ return -ENODEV; - -- return -ENODEV; -+ return 0; - } - - static int pxa3xx_nand_scan(struct mtd_info *mtd) diff --git a/target/linux/mvebu/patches-3.10/0142-mtd-nand-pxa3xx-Add-bad-block-handling.patch b/target/linux/mvebu/patches-3.10/0142-mtd-nand-pxa3xx-Add-bad-block-handling.patch deleted file mode 100644 index 0d04bf4d82..0000000000 --- a/target/linux/mvebu/patches-3.10/0142-mtd-nand-pxa3xx-Add-bad-block-handling.patch +++ /dev/null @@ -1,108 +0,0 @@ -From bd428b9b18c2dffb8c9d737e99adfd145822e502 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Thu, 14 Nov 2013 18:25:28 -0300 -Subject: [PATCH 142/203] mtd: nand: pxa3xx: Add bad block handling - -Add support for flash-based bad block table using Marvell's -custom in-flash bad block table layout. The support is enabled -a 'flash_bbt' platform data or device tree parameter. - -Signed-off-by: Ezequiel Garcia -Tested-by: Daniel Mack -Signed-off-by: Brian Norris ---- - .../devicetree/bindings/mtd/pxa3xx-nand.txt | 2 ++ - drivers/mtd/nand/pxa3xx_nand.c | 37 ++++++++++++++++++++++ - include/linux/platform_data/mtd-nand-pxa3xx.h | 3 ++ - 3 files changed, 42 insertions(+) - ---- a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt -+++ b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt -@@ -13,6 +13,8 @@ Optional properties: - - marvell,nand-keep-config: Set to keep the NAND controller config as set - by the bootloader - - num-cs: Number of chipselect lines to usw -+ - nand-on-flash-bbt: boolean to enable on flash bbt option if -+ not present false - - Example: - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -26,6 +26,7 @@ - #include - #include - #include -+#include - - #if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP) - #define ARCH_HAS_DMA -@@ -241,6 +242,29 @@ static struct pxa3xx_nand_flash builtin_ - { "256MiB 16-bit", 0xba20, 64, 2048, 16, 16, 2048, &timing[3] }, - }; - -+static u8 bbt_pattern[] = {'M', 'V', 'B', 'b', 't', '0' }; -+static u8 bbt_mirror_pattern[] = {'1', 't', 'b', 'B', 'V', 'M' }; -+ -+static struct nand_bbt_descr bbt_main_descr = { -+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE -+ | NAND_BBT_2BIT | NAND_BBT_VERSION, -+ .offs = 8, -+ .len = 6, -+ .veroffs = 14, -+ .maxblocks = 8, /* Last 8 blocks in each chip */ -+ .pattern = bbt_pattern -+}; -+ -+static struct nand_bbt_descr bbt_mirror_descr = { -+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE -+ | NAND_BBT_2BIT | NAND_BBT_VERSION, -+ .offs = 8, -+ .len = 6, -+ .veroffs = 14, -+ .maxblocks = 8, /* Last 8 blocks in each chip */ -+ .pattern = bbt_mirror_pattern -+}; -+ - /* Define a default flash type setting serve as flash detecting only */ - #define DEFAULT_FLASH_TYPE (&builtin_flash_types[0]) - -@@ -1126,6 +1150,18 @@ KEEP_CONFIG: - - if (nand_scan_ident(mtd, 1, def)) - return -ENODEV; -+ -+ if (pdata->flash_bbt) { -+ /* -+ * We'll use a bad block table stored in-flash and don't -+ * allow writing the bad block marker to the flash. -+ */ -+ chip->bbt_options |= NAND_BBT_USE_FLASH | -+ NAND_BBT_NO_OOB_BBM; -+ chip->bbt_td = &bbt_main_descr; -+ chip->bbt_md = &bbt_mirror_descr; -+ } -+ - /* calculate addressing information */ - if (mtd->writesize >= 2048) - host->col_addr_cycles = 2; -@@ -1320,6 +1356,7 @@ static int pxa3xx_nand_probe_dt(struct p - if (of_get_property(np, "marvell,nand-keep-config", NULL)) - pdata->keep_config = 1; - of_property_read_u32(np, "num-cs", &pdata->num_cs); -+ pdata->flash_bbt = of_get_nand_on_flash_bbt(np); - - pdev->dev.platform_data = pdata; - ---- a/include/linux/platform_data/mtd-nand-pxa3xx.h -+++ b/include/linux/platform_data/mtd-nand-pxa3xx.h -@@ -55,6 +55,9 @@ struct pxa3xx_nand_platform_data { - /* indicate how many chip selects will be used */ - int num_cs; - -+ /* use an flash-based bad block table */ -+ bool flash_bbt; -+ - const struct mtd_partition *parts[NUM_CHIP_SELECT]; - unsigned int nr_parts[NUM_CHIP_SELECT]; - diff --git a/target/linux/mvebu/patches-3.10/0143-mtd-nand-pxa3xx-Add-driver-specific-ECC-BCH-support.patch b/target/linux/mvebu/patches-3.10/0143-mtd-nand-pxa3xx-Add-driver-specific-ECC-BCH-support.patch deleted file mode 100644 index c310effadf..0000000000 --- a/target/linux/mvebu/patches-3.10/0143-mtd-nand-pxa3xx-Add-driver-specific-ECC-BCH-support.patch +++ /dev/null @@ -1,172 +0,0 @@ -From 3677d22ed7e3a631f35e2addc4e2181f6215e4b0 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Thu, 14 Nov 2013 18:25:29 -0300 -Subject: [PATCH 143/203] mtd: nand: pxa3xx: Add driver-specific ECC BCH - support - -This commit adds the BCH ECC support available in NFCv2 controller. -Depending on the detected required strength the respective ECC layout -is selected. - -This commit adds an empty ECC layout, since support to access large -pages is first required. Once that support is added, a proper ECC -layout will be added as well. - -Signed-off-by: Ezequiel Garcia -Tested-by: Daniel Mack -Signed-off-by: Brian Norris ---- - drivers/mtd/nand/pxa3xx_nand.c | 86 +++++++++++++++++++++++++++++++++--------- - 1 file changed, 69 insertions(+), 17 deletions(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -58,6 +58,7 @@ - #define NDPCR (0x18) /* Page Count Register */ - #define NDBDR0 (0x1C) /* Bad Block Register 0 */ - #define NDBDR1 (0x20) /* Bad Block Register 1 */ -+#define NDECCCTRL (0x28) /* ECC control */ - #define NDDB (0x40) /* Data Buffer */ - #define NDCB0 (0x48) /* Command Buffer0 */ - #define NDCB1 (0x4C) /* Command Buffer1 */ -@@ -198,6 +199,7 @@ struct pxa3xx_nand_info { - - int cs; - int use_ecc; /* use HW ECC ? */ -+ int ecc_bch; /* using BCH ECC? */ - int use_dma; /* use DMA ? */ - int use_spare; /* use spare ? */ - int need_wait; -@@ -205,6 +207,8 @@ struct pxa3xx_nand_info { - unsigned int fifo_size; /* max. data size in the FIFO */ - unsigned int data_size; /* data to be read from FIFO */ - unsigned int oob_size; -+ unsigned int spare_size; -+ unsigned int ecc_size; - int retcode; - - /* cached register value */ -@@ -339,19 +343,12 @@ static void pxa3xx_set_datasize(struct p - int oob_enable = info->reg_ndcr & NDCR_SPARE_EN; - - info->data_size = info->fifo_size; -- if (!oob_enable) { -- info->oob_size = 0; -+ if (!oob_enable) - return; -- } - -- switch (info->fifo_size) { -- case 2048: -- info->oob_size = (info->use_ecc) ? 40 : 64; -- break; -- case 512: -- info->oob_size = (info->use_ecc) ? 8 : 16; -- break; -- } -+ info->oob_size = info->spare_size; -+ if (!info->use_ecc) -+ info->oob_size += info->ecc_size; - } - - /** -@@ -366,10 +363,15 @@ static void pxa3xx_nand_start(struct pxa - - ndcr = info->reg_ndcr; - -- if (info->use_ecc) -+ if (info->use_ecc) { - ndcr |= NDCR_ECC_EN; -- else -+ if (info->ecc_bch) -+ nand_writel(info, NDECCCTRL, 0x1); -+ } else { - ndcr &= ~NDCR_ECC_EN; -+ if (info->ecc_bch) -+ nand_writel(info, NDECCCTRL, 0x0); -+ } - - if (info->use_dma) - ndcr |= NDCR_DMA_EN; -@@ -1071,6 +1073,41 @@ static int pxa3xx_nand_sensing(struct px - return 0; - } - -+static int pxa_ecc_init(struct pxa3xx_nand_info *info, -+ struct nand_ecc_ctrl *ecc, -+ int strength, int page_size) -+{ -+ /* -+ * We don't use strength here as the PXA variant -+ * is used with non-ONFI compliant devices. -+ */ -+ if (page_size == 2048) { -+ info->spare_size = 40; -+ info->ecc_size = 24; -+ ecc->mode = NAND_ECC_HW; -+ ecc->size = 512; -+ ecc->strength = 1; -+ return 1; -+ -+ } else if (page_size == 512) { -+ info->spare_size = 8; -+ info->ecc_size = 8; -+ ecc->mode = NAND_ECC_HW; -+ ecc->size = 512; -+ ecc->strength = 1; -+ return 1; -+ } -+ return 0; -+} -+ -+static int armada370_ecc_init(struct pxa3xx_nand_info *info, -+ struct nand_ecc_ctrl *ecc, -+ int strength, int page_size) -+{ -+ /* Unimplemented yet */ -+ return 0; -+} -+ - static int pxa3xx_nand_scan(struct mtd_info *mtd) - { - struct pxa3xx_nand_host *host = mtd->priv; -@@ -1141,13 +1178,13 @@ static int pxa3xx_nand_scan(struct mtd_i - pxa3xx_flash_ids[1].name = NULL; - def = pxa3xx_flash_ids; - KEEP_CONFIG: -- chip->ecc.mode = NAND_ECC_HW; -- chip->ecc.size = info->fifo_size; -- chip->ecc.strength = 1; -- - if (info->reg_ndcr & NDCR_DWIDTH_M) - chip->options |= NAND_BUSWIDTH_16; - -+ /* Device detection must be done with ECC disabled */ -+ if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370) -+ nand_writel(info, NDECCCTRL, 0x0); -+ - if (nand_scan_ident(mtd, 1, def)) - return -ENODEV; - -@@ -1162,6 +1199,21 @@ KEEP_CONFIG: - chip->bbt_md = &bbt_mirror_descr; - } - -+ if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370) -+ ret = armada370_ecc_init(info, &chip->ecc, -+ chip->ecc_strength_ds, -+ mtd->writesize); -+ else -+ ret = pxa_ecc_init(info, &chip->ecc, -+ chip->ecc_strength_ds, -+ mtd->writesize); -+ if (!ret) { -+ dev_err(&info->pdev->dev, -+ "ECC strength %d at page size %d is not supported\n", -+ chip->ecc_strength_ds, mtd->writesize); -+ return -ENODEV; -+ } -+ - /* calculate addressing information */ - if (mtd->writesize >= 2048) - host->col_addr_cycles = 2; diff --git a/target/linux/mvebu/patches-3.10/0144-mtd-nand-pxa3xx-Clear-cmd-buffer-3-NDCB3-on-command-.patch b/target/linux/mvebu/patches-3.10/0144-mtd-nand-pxa3xx-Clear-cmd-buffer-3-NDCB3-on-command-.patch deleted file mode 100644 index 567cc8e1b1..0000000000 --- a/target/linux/mvebu/patches-3.10/0144-mtd-nand-pxa3xx-Clear-cmd-buffer-3-NDCB3-on-command-.patch +++ /dev/null @@ -1,34 +0,0 @@ -From cb574fecefd9552e5c6c5105adab7b37b0feb712 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Thu, 14 Nov 2013 18:25:30 -0300 -Subject: [PATCH 144/203] mtd: nand: pxa3xx: Clear cmd buffer #3 (NDCB3) on - command start - -Command buffer #3 is not properly cleared and it keeps the last -set value. Fix this by clearing when a command is setup. - -Signed-off-by: Ezequiel Garcia -Tested-by: Daniel Mack -Signed-off-by: Brian Norris ---- - drivers/mtd/nand/pxa3xx_nand.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -606,6 +606,7 @@ static int prepare_command_pool(struct p - info->use_ecc = 0; - info->use_spare = 1; - info->retcode = ERR_NONE; -+ info->ndcb3 = 0; - if (info->cs != 0) - info->ndcb0 = NDCB0_CSEL; - else -@@ -627,7 +628,6 @@ static int prepare_command_pool(struct p - default: - info->ndcb1 = 0; - info->ndcb2 = 0; -- info->ndcb3 = 0; - break; - } - diff --git a/target/linux/mvebu/patches-3.10/0145-mtd-nand-pxa3xx-Add-helper-function-to-set-page-addr.patch b/target/linux/mvebu/patches-3.10/0145-mtd-nand-pxa3xx-Add-helper-function-to-set-page-addr.patch deleted file mode 100644 index a0a909e09d..0000000000 --- a/target/linux/mvebu/patches-3.10/0145-mtd-nand-pxa3xx-Add-helper-function-to-set-page-addr.patch +++ /dev/null @@ -1,70 +0,0 @@ -From 09a84f8e89c3715160423701b0606ef99e2a05bf Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Thu, 14 Nov 2013 18:25:31 -0300 -Subject: [PATCH 145/203] mtd: nand: pxa3xx: Add helper function to set page - address - -Let's simplify the code by first introducing a helper function -to set the page address, as done by the READ0, READOOB and SEQIN -commands. - -Signed-off-by: Ezequiel Garcia -Tested-by: Daniel Mack -Signed-off-by: Brian Norris ---- - drivers/mtd/nand/pxa3xx_nand.c | 36 +++++++++++++++++++++--------------- - 1 file changed, 21 insertions(+), 15 deletions(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -587,6 +587,26 @@ static inline int is_buf_blank(uint8_t * - return 1; - } - -+static void set_command_address(struct pxa3xx_nand_info *info, -+ unsigned int page_size, uint16_t column, int page_addr) -+{ -+ /* small page addr setting */ -+ if (page_size < PAGE_CHUNK_SIZE) { -+ info->ndcb1 = ((page_addr & 0xFFFFFF) << 8) -+ | (column & 0xFF); -+ -+ info->ndcb2 = 0; -+ } else { -+ info->ndcb1 = ((page_addr & 0xFFFF) << 16) -+ | (column & 0xFFFF); -+ -+ if (page_addr & 0xFF0000) -+ info->ndcb2 = (page_addr & 0xFF0000) >> 16; -+ else -+ info->ndcb2 = 0; -+ } -+} -+ - static int prepare_command_pool(struct pxa3xx_nand_info *info, int command, - uint16_t column, int page_addr) - { -@@ -650,22 +670,8 @@ static int prepare_command_pool(struct p - info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8); - - case NAND_CMD_SEQIN: -- /* small page addr setting */ -- if (unlikely(mtd->writesize < PAGE_CHUNK_SIZE)) { -- info->ndcb1 = ((page_addr & 0xFFFFFF) << 8) -- | (column & 0xFF); -- -- info->ndcb2 = 0; -- } else { -- info->ndcb1 = ((page_addr & 0xFFFF) << 16) -- | (column & 0xFFFF); -- -- if (page_addr & 0xFF0000) -- info->ndcb2 = (page_addr & 0xFF0000) >> 16; -- else -- info->ndcb2 = 0; -- } - -+ set_command_address(info, mtd->writesize, column, page_addr); - info->buf_count = mtd->writesize + mtd->oobsize; - memset(info->data_buff, 0xFF, info->buf_count); - diff --git a/target/linux/mvebu/patches-3.10/0146-mtd-nand-pxa3xx-Remove-READ0-switch-case-falltrough.patch b/target/linux/mvebu/patches-3.10/0146-mtd-nand-pxa3xx-Remove-READ0-switch-case-falltrough.patch deleted file mode 100644 index 0631b926b1..0000000000 --- a/target/linux/mvebu/patches-3.10/0146-mtd-nand-pxa3xx-Remove-READ0-switch-case-falltrough.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 11532c10a29e4faef29b5f3b354391d1e2f90213 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Thu, 14 Nov 2013 18:25:32 -0300 -Subject: [PATCH 146/203] mtd: nand: pxa3xx: Remove READ0 switch/case - falltrough - -READ0 and READOOB command preparation has a falltrough to SEQIN -case, where the command address is specified. -This is certainly confusing and makes the code less readable with -no added value. Let's remove it. - -Signed-off-by: Ezequiel Garcia -Tested-by: Daniel Mack -Signed-off-by: Brian Norris ---- - drivers/mtd/nand/pxa3xx_nand.c | 5 +++++ - 1 file changed, 5 insertions(+) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -669,6 +669,11 @@ static int prepare_command_pool(struct p - if (mtd->writesize >= PAGE_CHUNK_SIZE) - info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8); - -+ set_command_address(info, mtd->writesize, column, page_addr); -+ info->buf_count = mtd->writesize + mtd->oobsize; -+ memset(info->data_buff, 0xFF, info->buf_count); -+ break; -+ - case NAND_CMD_SEQIN: - - set_command_address(info, mtd->writesize, column, page_addr); diff --git a/target/linux/mvebu/patches-3.10/0147-mtd-nand-pxa3xx-Split-prepare_command_pool-in-two-st.patch b/target/linux/mvebu/patches-3.10/0147-mtd-nand-pxa3xx-Split-prepare_command_pool-in-two-st.patch deleted file mode 100644 index aa25c07bb4..0000000000 --- a/target/linux/mvebu/patches-3.10/0147-mtd-nand-pxa3xx-Split-prepare_command_pool-in-two-st.patch +++ /dev/null @@ -1,101 +0,0 @@ -From 78c8c8dc7e27c4502504cb4daa07bc9762f54de9 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Thu, 14 Nov 2013 18:25:33 -0300 -Subject: [PATCH 147/203] mtd: nand: pxa3xx: Split prepare_command_pool() in - two stages - -This commit splits the prepare_command_pool() function into two -stages: prepare_start_command() / prepare_set_command(). - -This is a preparation patch without any functionality changes, -and is meant to allow support for multiple page reading/writing -operations. - -Signed-off-by: Ezequiel Garcia -Tested-by: Daniel Mack -Signed-off-by: Brian Norris ---- - drivers/mtd/nand/pxa3xx_nand.c | 44 ++++++++++++++++++++++++------------------ - 1 file changed, 25 insertions(+), 19 deletions(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -607,18 +607,8 @@ static void set_command_address(struct p - } - } - --static int prepare_command_pool(struct pxa3xx_nand_info *info, int command, -- uint16_t column, int page_addr) -+static void prepare_start_command(struct pxa3xx_nand_info *info, int command) - { -- int addr_cycle, exec_cmd; -- struct pxa3xx_nand_host *host; -- struct mtd_info *mtd; -- -- host = info->host[info->cs]; -- mtd = host->mtd; -- addr_cycle = 0; -- exec_cmd = 1; -- - /* reset data and oob column point to handle data */ - info->buf_start = 0; - info->buf_count = 0; -@@ -627,10 +617,6 @@ static int prepare_command_pool(struct p - info->use_spare = 1; - info->retcode = ERR_NONE; - info->ndcb3 = 0; -- if (info->cs != 0) -- info->ndcb0 = NDCB0_CSEL; -- else -- info->ndcb0 = 0; - - switch (command) { - case NAND_CMD_READ0: -@@ -642,14 +628,32 @@ static int prepare_command_pool(struct p - case NAND_CMD_PARAM: - info->use_spare = 0; - break; -- case NAND_CMD_SEQIN: -- exec_cmd = 0; -- break; - default: - info->ndcb1 = 0; - info->ndcb2 = 0; - break; - } -+} -+ -+static int prepare_set_command(struct pxa3xx_nand_info *info, int command, -+ uint16_t column, int page_addr) -+{ -+ int addr_cycle, exec_cmd; -+ struct pxa3xx_nand_host *host; -+ struct mtd_info *mtd; -+ -+ host = info->host[info->cs]; -+ mtd = host->mtd; -+ addr_cycle = 0; -+ exec_cmd = 1; -+ -+ if (info->cs != 0) -+ info->ndcb0 = NDCB0_CSEL; -+ else -+ info->ndcb0 = 0; -+ -+ if (command == NAND_CMD_SEQIN) -+ exec_cmd = 0; - - addr_cycle = NDCB0_ADDR_CYC(host->row_addr_cycles - + host->col_addr_cycles); -@@ -784,8 +788,10 @@ static void pxa3xx_nand_cmdfunc(struct m - nand_writel(info, NDTR1CS0, info->ndtr1cs0); - } - -+ prepare_start_command(info, command); -+ - info->state = STATE_PREPARED; -- exec_cmd = prepare_command_pool(info, command, column, page_addr); -+ exec_cmd = prepare_set_command(info, command, column, page_addr); - if (exec_cmd) { - init_completion(&info->cmd_complete); - init_completion(&info->dev_ready); diff --git a/target/linux/mvebu/patches-3.10/0148-mtd-nand-pxa3xx-Move-the-data-buffer-clean-to-prepar.patch b/target/linux/mvebu/patches-3.10/0148-mtd-nand-pxa3xx-Move-the-data-buffer-clean-to-prepar.patch deleted file mode 100644 index 3d74844f5c..0000000000 --- a/target/linux/mvebu/patches-3.10/0148-mtd-nand-pxa3xx-Move-the-data-buffer-clean-to-prepar.patch +++ /dev/null @@ -1,69 +0,0 @@ -From 1c0aed9b4cfb7bb891aab07a429436d017ac4d7c Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Thu, 14 Nov 2013 18:25:34 -0300 -Subject: [PATCH 148/203] mtd: nand: pxa3xx: Move the data buffer clean to - prepare_start_command() - -To allow future support of multiple page reading/writing, move the data -buffer clean out of prepare_set_command(). - -This is done to prevent the data buffer from being cleaned on every command -preparation, when a multiple command sequence is implemented to read/write -pages larger than the FIFO size (2 KiB). - -Signed-off-by: Ezequiel Garcia -Tested-by: Daniel Mack -Signed-off-by: Brian Norris ---- - drivers/mtd/nand/pxa3xx_nand.c | 21 ++++++++++++++++----- - 1 file changed, 16 insertions(+), 5 deletions(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -609,6 +609,9 @@ static void set_command_address(struct p - - static void prepare_start_command(struct pxa3xx_nand_info *info, int command) - { -+ struct pxa3xx_nand_host *host = info->host[info->cs]; -+ struct mtd_info *mtd = host->mtd; -+ - /* reset data and oob column point to handle data */ - info->buf_start = 0; - info->buf_count = 0; -@@ -633,6 +636,19 @@ static void prepare_start_command(struct - info->ndcb2 = 0; - break; - } -+ -+ /* -+ * If we are about to issue a read command, or about to set -+ * the write address, then clean the data buffer. -+ */ -+ if (command == NAND_CMD_READ0 || -+ command == NAND_CMD_READOOB || -+ command == NAND_CMD_SEQIN) { -+ -+ info->buf_count = mtd->writesize + mtd->oobsize; -+ memset(info->data_buff, 0xFF, info->buf_count); -+ } -+ - } - - static int prepare_set_command(struct pxa3xx_nand_info *info, int command, -@@ -674,16 +690,11 @@ static int prepare_set_command(struct px - info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8); - - set_command_address(info, mtd->writesize, column, page_addr); -- info->buf_count = mtd->writesize + mtd->oobsize; -- memset(info->data_buff, 0xFF, info->buf_count); - break; - - case NAND_CMD_SEQIN: - - set_command_address(info, mtd->writesize, column, page_addr); -- info->buf_count = mtd->writesize + mtd->oobsize; -- memset(info->data_buff, 0xFF, info->buf_count); -- - break; - - case NAND_CMD_PAGEPROG: diff --git a/target/linux/mvebu/patches-3.10/0149-mtd-nand-pxa3xx-Fix-SEQIN-column-address-set.patch b/target/linux/mvebu/patches-3.10/0149-mtd-nand-pxa3xx-Fix-SEQIN-column-address-set.patch deleted file mode 100644 index cb59ccbd1c..0000000000 --- a/target/linux/mvebu/patches-3.10/0149-mtd-nand-pxa3xx-Fix-SEQIN-column-address-set.patch +++ /dev/null @@ -1,32 +0,0 @@ -From d5c9b013c71a570737353270f94b9a52639fcea1 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Thu, 14 Nov 2013 18:25:35 -0300 -Subject: [PATCH 149/203] mtd: nand: pxa3xx: Fix SEQIN column address set - -This commit adds support page programming with a non-zero "column" -address setting. This is important to support OOB writing, through -command sequences such as: - - cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, ofs); - write_buf(mtd, oob_buf, 6); - cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); - -Signed-off-by: Ezequiel Garcia -Tested-by: Daniel Mack -Signed-off-by: Brian Norris ---- - drivers/mtd/nand/pxa3xx_nand.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -694,7 +694,8 @@ static int prepare_set_command(struct px - - case NAND_CMD_SEQIN: - -- set_command_address(info, mtd->writesize, column, page_addr); -+ info->buf_start = column; -+ set_command_address(info, mtd->writesize, 0, page_addr); - break; - - case NAND_CMD_PAGEPROG: diff --git a/target/linux/mvebu/patches-3.10/0150-mtd-nand-pxa3xx-Add-a-read-write-buffers-markers.patch b/target/linux/mvebu/patches-3.10/0150-mtd-nand-pxa3xx-Add-a-read-write-buffers-markers.patch deleted file mode 100644 index 1251f6022a..0000000000 --- a/target/linux/mvebu/patches-3.10/0150-mtd-nand-pxa3xx-Add-a-read-write-buffers-markers.patch +++ /dev/null @@ -1,111 +0,0 @@ -From 6e3022aeb5d221af838ad43a2163374aecacf929 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Thu, 14 Nov 2013 18:25:36 -0300 -Subject: [PATCH 150/203] mtd: nand: pxa3xx: Add a read/write buffers markers - -In preparation to support multiple (aka chunked, aka splitted) -page I/O, this commit adds 'data_buff_pos' and 'oob_buff_pos' fields -to keep track of where the next read (or write) should be done. - -This will allow multiple calls to handle_data_pio() to continue -the read (or write) operation. - -Signed-off-by: Ezequiel Garcia -Tested-by: Daniel Mack -Signed-off-by: Brian Norris ---- - drivers/mtd/nand/pxa3xx_nand.c | 40 +++++++++++++++++++++++++++++----------- - 1 file changed, 29 insertions(+), 11 deletions(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -176,6 +176,8 @@ struct pxa3xx_nand_info { - unsigned int buf_start; - unsigned int buf_count; - unsigned int buf_size; -+ unsigned int data_buff_pos; -+ unsigned int oob_buff_pos; - - /* DMA information */ - int drcmr_dat; -@@ -338,11 +340,12 @@ static void pxa3xx_nand_set_timing(struc - * spare and ECC configuration. - * Only applicable to READ0, READOOB and PAGEPROG commands. - */ --static void pxa3xx_set_datasize(struct pxa3xx_nand_info *info) -+static void pxa3xx_set_datasize(struct pxa3xx_nand_info *info, -+ struct mtd_info *mtd) - { - int oob_enable = info->reg_ndcr & NDCR_SPARE_EN; - -- info->data_size = info->fifo_size; -+ info->data_size = mtd->writesize; - if (!oob_enable) - return; - -@@ -430,26 +433,39 @@ static void disable_int(struct pxa3xx_na - - static void handle_data_pio(struct pxa3xx_nand_info *info) - { -+ unsigned int do_bytes = min(info->data_size, info->fifo_size); -+ - switch (info->state) { - case STATE_PIO_WRITING: -- __raw_writesl(info->mmio_base + NDDB, info->data_buff, -- DIV_ROUND_UP(info->data_size, 4)); -+ __raw_writesl(info->mmio_base + NDDB, -+ info->data_buff + info->data_buff_pos, -+ DIV_ROUND_UP(do_bytes, 4)); -+ - if (info->oob_size > 0) -- __raw_writesl(info->mmio_base + NDDB, info->oob_buff, -- DIV_ROUND_UP(info->oob_size, 4)); -+ __raw_writesl(info->mmio_base + NDDB, -+ info->oob_buff + info->oob_buff_pos, -+ DIV_ROUND_UP(info->oob_size, 4)); - break; - case STATE_PIO_READING: -- __raw_readsl(info->mmio_base + NDDB, info->data_buff, -- DIV_ROUND_UP(info->data_size, 4)); -+ __raw_readsl(info->mmio_base + NDDB, -+ info->data_buff + info->data_buff_pos, -+ DIV_ROUND_UP(do_bytes, 4)); -+ - if (info->oob_size > 0) -- __raw_readsl(info->mmio_base + NDDB, info->oob_buff, -- DIV_ROUND_UP(info->oob_size, 4)); -+ __raw_readsl(info->mmio_base + NDDB, -+ info->oob_buff + info->oob_buff_pos, -+ DIV_ROUND_UP(info->oob_size, 4)); - break; - default: - dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__, - info->state); - BUG(); - } -+ -+ /* Update buffer pointers for multi-page read/write */ -+ info->data_buff_pos += do_bytes; -+ info->oob_buff_pos += info->oob_size; -+ info->data_size -= do_bytes; - } - - #ifdef ARCH_HAS_DMA -@@ -616,6 +632,8 @@ static void prepare_start_command(struct - info->buf_start = 0; - info->buf_count = 0; - info->oob_size = 0; -+ info->data_buff_pos = 0; -+ info->oob_buff_pos = 0; - info->use_ecc = 0; - info->use_spare = 1; - info->retcode = ERR_NONE; -@@ -626,7 +644,7 @@ static void prepare_start_command(struct - case NAND_CMD_PAGEPROG: - info->use_ecc = 1; - case NAND_CMD_READOOB: -- pxa3xx_set_datasize(info); -+ pxa3xx_set_datasize(info, mtd); - break; - case NAND_CMD_PARAM: - info->use_spare = 0; diff --git a/target/linux/mvebu/patches-3.10/0151-mtd-nand-pxa3xx-Introduce-multiple-page-I-O-support.patch b/target/linux/mvebu/patches-3.10/0151-mtd-nand-pxa3xx-Introduce-multiple-page-I-O-support.patch deleted file mode 100644 index f8e3c8796d..0000000000 --- a/target/linux/mvebu/patches-3.10/0151-mtd-nand-pxa3xx-Introduce-multiple-page-I-O-support.patch +++ /dev/null @@ -1,325 +0,0 @@ -From cfd1799f9ec5c9820f371e1fcf2f3c458bd24ebb Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Thu, 14 Nov 2013 18:25:37 -0300 -Subject: [PATCH 151/203] mtd: nand: pxa3xx: Introduce multiple page I/O - support - -As preparation work to fully support large pages, this commit adds -the initial infrastructure to support splitted (aka chunked) I/O -operation. This commit adds support for read, and follow-up patches -will add write support. - -When a read (aka READ0) command is issued, the driver loops issuing -the same command until all the requested data is transfered, changing -the 'extended' command field as needed. - -For instance, if the driver is required to read a 4 KiB page, using a -chunk size of 2 KiB, the transaction is splitted in: -1. Monolithic read, first 2 KiB page chunk is read -2. Last naked read, second and last 2KiB page chunk is read - -If ECC is enabled it is calculated on each chunk transfered and added -at a controller-fixed location after the data chunk that must be -spare area. - -Signed-off-by: Ezequiel Garcia -Tested-by: Daniel Mack -Signed-off-by: Brian Norris ---- - drivers/mtd/nand/pxa3xx_nand.c | 182 ++++++++++++++++++++++++++++++++++++++--- - 1 file changed, 172 insertions(+), 10 deletions(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -103,6 +103,8 @@ - #define NDCB0_ST_ROW_EN (0x1 << 26) - #define NDCB0_AUTO_RS (0x1 << 25) - #define NDCB0_CSEL (0x1 << 24) -+#define NDCB0_EXT_CMD_TYPE_MASK (0x7 << 29) -+#define NDCB0_EXT_CMD_TYPE(x) (((x) << 29) & NDCB0_EXT_CMD_TYPE_MASK) - #define NDCB0_CMD_TYPE_MASK (0x7 << 21) - #define NDCB0_CMD_TYPE(x) (((x) << 21) & NDCB0_CMD_TYPE_MASK) - #define NDCB0_NC (0x1 << 20) -@@ -113,6 +115,14 @@ - #define NDCB0_CMD1_MASK (0xff) - #define NDCB0_ADDR_CYC_SHIFT (16) - -+#define EXT_CMD_TYPE_DISPATCH 6 /* Command dispatch */ -+#define EXT_CMD_TYPE_NAKED_RW 5 /* Naked read or Naked write */ -+#define EXT_CMD_TYPE_READ 4 /* Read */ -+#define EXT_CMD_TYPE_DISP_WR 4 /* Command dispatch with write */ -+#define EXT_CMD_TYPE_FINAL 3 /* Final command */ -+#define EXT_CMD_TYPE_LAST_RW 1 /* Last naked read/write */ -+#define EXT_CMD_TYPE_MONO 0 /* Monolithic read/write */ -+ - /* macros for registers read/write */ - #define nand_writel(info, off, val) \ - __raw_writel((val), (info)->mmio_base + (off)) -@@ -206,8 +216,8 @@ struct pxa3xx_nand_info { - int use_spare; /* use spare ? */ - int need_wait; - -- unsigned int fifo_size; /* max. data size in the FIFO */ - unsigned int data_size; /* data to be read from FIFO */ -+ unsigned int chunk_size; /* split commands chunk size */ - unsigned int oob_size; - unsigned int spare_size; - unsigned int ecc_size; -@@ -271,6 +281,31 @@ static struct nand_bbt_descr bbt_mirror_ - .pattern = bbt_mirror_pattern - }; - -+static struct nand_ecclayout ecc_layout_4KB_bch4bit = { -+ .eccbytes = 64, -+ .eccpos = { -+ 32, 33, 34, 35, 36, 37, 38, 39, -+ 40, 41, 42, 43, 44, 45, 46, 47, -+ 48, 49, 50, 51, 52, 53, 54, 55, -+ 56, 57, 58, 59, 60, 61, 62, 63, -+ 96, 97, 98, 99, 100, 101, 102, 103, -+ 104, 105, 106, 107, 108, 109, 110, 111, -+ 112, 113, 114, 115, 116, 117, 118, 119, -+ 120, 121, 122, 123, 124, 125, 126, 127}, -+ /* Bootrom looks in bytes 0 & 5 for bad blocks */ -+ .oobfree = { {6, 26}, { 64, 32} } -+}; -+ -+static struct nand_ecclayout ecc_layout_4KB_bch8bit = { -+ .eccbytes = 128, -+ .eccpos = { -+ 32, 33, 34, 35, 36, 37, 38, 39, -+ 40, 41, 42, 43, 44, 45, 46, 47, -+ 48, 49, 50, 51, 52, 53, 54, 55, -+ 56, 57, 58, 59, 60, 61, 62, 63}, -+ .oobfree = { } -+}; -+ - /* Define a default flash type setting serve as flash detecting only */ - #define DEFAULT_FLASH_TYPE (&builtin_flash_types[0]) - -@@ -433,7 +468,7 @@ static void disable_int(struct pxa3xx_na - - static void handle_data_pio(struct pxa3xx_nand_info *info) - { -- unsigned int do_bytes = min(info->data_size, info->fifo_size); -+ unsigned int do_bytes = min(info->data_size, info->chunk_size); - - switch (info->state) { - case STATE_PIO_WRITING: -@@ -670,7 +705,7 @@ static void prepare_start_command(struct - } - - static int prepare_set_command(struct pxa3xx_nand_info *info, int command, -- uint16_t column, int page_addr) -+ int ext_cmd_type, uint16_t column, int page_addr) - { - int addr_cycle, exec_cmd; - struct pxa3xx_nand_host *host; -@@ -703,9 +738,20 @@ static int prepare_set_command(struct px - if (command == NAND_CMD_READOOB) - info->buf_start += mtd->writesize; - -- /* Second command setting for large pages */ -- if (mtd->writesize >= PAGE_CHUNK_SIZE) -+ /* -+ * Multiple page read needs an 'extended command type' field, -+ * which is either naked-read or last-read according to the -+ * state. -+ */ -+ if (mtd->writesize == PAGE_CHUNK_SIZE) { - info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8); -+ } else if (mtd->writesize > PAGE_CHUNK_SIZE) { -+ info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8) -+ | NDCB0_LEN_OVRD -+ | NDCB0_EXT_CMD_TYPE(ext_cmd_type); -+ info->ndcb3 = info->chunk_size + -+ info->oob_size; -+ } - - set_command_address(info, mtd->writesize, column, page_addr); - break; -@@ -821,7 +867,8 @@ static void pxa3xx_nand_cmdfunc(struct m - prepare_start_command(info, command); - - info->state = STATE_PREPARED; -- exec_cmd = prepare_set_command(info, command, column, page_addr); -+ exec_cmd = prepare_set_command(info, command, 0, column, page_addr); -+ - if (exec_cmd) { - init_completion(&info->cmd_complete); - init_completion(&info->dev_ready); -@@ -839,6 +886,93 @@ static void pxa3xx_nand_cmdfunc(struct m - info->state = STATE_IDLE; - } - -+static void armada370_nand_cmdfunc(struct mtd_info *mtd, -+ const unsigned command, -+ int column, int page_addr) -+{ -+ struct pxa3xx_nand_host *host = mtd->priv; -+ struct pxa3xx_nand_info *info = host->info_data; -+ int ret, exec_cmd, ext_cmd_type; -+ -+ /* -+ * if this is a x16 device then convert the input -+ * "byte" address into a "word" address appropriate -+ * for indexing a word-oriented device -+ */ -+ if (info->reg_ndcr & NDCR_DWIDTH_M) -+ column /= 2; -+ -+ /* -+ * There may be different NAND chip hooked to -+ * different chip select, so check whether -+ * chip select has been changed, if yes, reset the timing -+ */ -+ if (info->cs != host->cs) { -+ info->cs = host->cs; -+ nand_writel(info, NDTR0CS0, info->ndtr0cs0); -+ nand_writel(info, NDTR1CS0, info->ndtr1cs0); -+ } -+ -+ /* Select the extended command for the first command */ -+ switch (command) { -+ case NAND_CMD_READ0: -+ case NAND_CMD_READOOB: -+ ext_cmd_type = EXT_CMD_TYPE_MONO; -+ break; -+ default: -+ ext_cmd_type = 0; -+ } -+ -+ prepare_start_command(info, command); -+ -+ /* -+ * Prepare the "is ready" completion before starting a command -+ * transaction sequence. If the command is not executed the -+ * completion will be completed, see below. -+ * -+ * We can do that inside the loop because the command variable -+ * is invariant and thus so is the exec_cmd. -+ */ -+ info->need_wait = 1; -+ init_completion(&info->dev_ready); -+ do { -+ info->state = STATE_PREPARED; -+ exec_cmd = prepare_set_command(info, command, ext_cmd_type, -+ column, page_addr); -+ if (!exec_cmd) { -+ info->need_wait = 0; -+ complete(&info->dev_ready); -+ break; -+ } -+ -+ init_completion(&info->cmd_complete); -+ pxa3xx_nand_start(info); -+ -+ ret = wait_for_completion_timeout(&info->cmd_complete, -+ CHIP_DELAY_TIMEOUT); -+ if (!ret) { -+ dev_err(&info->pdev->dev, "Wait time out!!!\n"); -+ /* Stop State Machine for next command cycle */ -+ pxa3xx_nand_stop(info); -+ break; -+ } -+ -+ /* Check if the sequence is complete */ -+ if (info->data_size == 0) -+ break; -+ -+ if (command == NAND_CMD_READ0 || command == NAND_CMD_READOOB) { -+ /* Last read: issue a 'last naked read' */ -+ if (info->data_size == info->chunk_size) -+ ext_cmd_type = EXT_CMD_TYPE_LAST_RW; -+ else -+ ext_cmd_type = EXT_CMD_TYPE_NAKED_RW; -+ } -+ } while (1); -+ -+ info->state = STATE_IDLE; -+} -+ - static int pxa3xx_nand_write_page_hwecc(struct mtd_info *mtd, - struct nand_chip *chip, const uint8_t *buf, int oob_required) - { -@@ -1019,13 +1153,14 @@ static int pxa3xx_nand_detect_config(str - - if (ndcr & NDCR_PAGE_SZ) { - /* Controller's FIFO size */ -- info->fifo_size = 2048; -+ info->chunk_size = 2048; - host->read_id_bytes = 4; - } else { -- info->fifo_size = 512; -+ info->chunk_size = 512; - host->read_id_bytes = 2; - } - -+ /* Set an initial chunk size */ - info->reg_ndcr = ndcr & ~NDCR_INT_MASK; - info->ndtr0cs0 = nand_readl(info, NDTR0CS0); - info->ndtr1cs0 = nand_readl(info, NDTR1CS0); -@@ -1129,6 +1264,7 @@ static int pxa_ecc_init(struct pxa3xx_na - * is used with non-ONFI compliant devices. - */ - if (page_size == 2048) { -+ info->chunk_size = 2048; - info->spare_size = 40; - info->ecc_size = 24; - ecc->mode = NAND_ECC_HW; -@@ -1137,6 +1273,7 @@ static int pxa_ecc_init(struct pxa3xx_na - return 1; - - } else if (page_size == 512) { -+ info->chunk_size = 512; - info->spare_size = 8; - info->ecc_size = 8; - ecc->mode = NAND_ECC_HW; -@@ -1151,7 +1288,28 @@ static int armada370_ecc_init(struct pxa - struct nand_ecc_ctrl *ecc, - int strength, int page_size) - { -- /* Unimplemented yet */ -+ if (strength == 4 && page_size == 4096) { -+ info->ecc_bch = 1; -+ info->chunk_size = 2048; -+ info->spare_size = 32; -+ info->ecc_size = 32; -+ ecc->mode = NAND_ECC_HW; -+ ecc->size = info->chunk_size; -+ ecc->layout = &ecc_layout_4KB_bch4bit; -+ ecc->strength = 16; -+ return 1; -+ -+ } else if (strength == 8 && page_size == 4096) { -+ info->ecc_bch = 1; -+ info->chunk_size = 1024; -+ info->spare_size = 0; -+ info->ecc_size = 32; -+ ecc->mode = NAND_ECC_HW; -+ ecc->size = info->chunk_size; -+ ecc->layout = &ecc_layout_4KB_bch8bit; -+ ecc->strength = 16; -+ return 1; -+ } - return 0; - } - -@@ -1319,12 +1477,16 @@ static int alloc_nand_resource(struct pl - chip->controller = &info->controller; - chip->waitfunc = pxa3xx_nand_waitfunc; - chip->select_chip = pxa3xx_nand_select_chip; -- chip->cmdfunc = pxa3xx_nand_cmdfunc; - chip->read_word = pxa3xx_nand_read_word; - chip->read_byte = pxa3xx_nand_read_byte; - chip->read_buf = pxa3xx_nand_read_buf; - chip->write_buf = pxa3xx_nand_write_buf; - chip->options |= NAND_NO_SUBPAGE_WRITE; -+ -+ if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370) -+ chip->cmdfunc = armada370_nand_cmdfunc; -+ else -+ chip->cmdfunc = pxa3xx_nand_cmdfunc; - } - - spin_lock_init(&chip->controller->lock); diff --git a/target/linux/mvebu/patches-3.10/0152-mtd-nand-pxa3xx-Add-multiple-chunk-write-support.patch b/target/linux/mvebu/patches-3.10/0152-mtd-nand-pxa3xx-Add-multiple-chunk-write-support.patch deleted file mode 100644 index 058dc0bc3c..0000000000 --- a/target/linux/mvebu/patches-3.10/0152-mtd-nand-pxa3xx-Add-multiple-chunk-write-support.patch +++ /dev/null @@ -1,146 +0,0 @@ -From db95c66cebb6297595a5a32b369d1033b08775ce Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Thu, 14 Nov 2013 18:25:38 -0300 -Subject: [PATCH 152/203] mtd: nand: pxa3xx: Add multiple chunk write support - -This commit adds write support for large pages (4 KiB, 8 KiB). -Such support is implemented by issuing a multiple command sequence, -transfering a set of 2 KiB chunks per transaction. - -The splitted command sequence requires to send the SEQIN command -independently of the PAGEPROG command and therefore it's set as -an execution command. - -Since PAGEPROG enables ECC, each 2 KiB chunk of data is written -together with ECC code at a controller-fixed location within -the flash page. - -Currently, only devices with a 4 KiB page size has been tested. - -Signed-off-by: Ezequiel Garcia -Tested-by: Daniel Mack -Signed-off-by: Brian Norris ---- - drivers/mtd/nand/pxa3xx_nand.c | 81 +++++++++++++++++++++++++++++++++++++----- - 1 file changed, 73 insertions(+), 8 deletions(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -760,6 +760,20 @@ static int prepare_set_command(struct px - - info->buf_start = column; - set_command_address(info, mtd->writesize, 0, page_addr); -+ -+ /* -+ * Multiple page programming needs to execute the initial -+ * SEQIN command that sets the page address. -+ */ -+ if (mtd->writesize > PAGE_CHUNK_SIZE) { -+ info->ndcb0 |= NDCB0_CMD_TYPE(0x1) -+ | NDCB0_EXT_CMD_TYPE(ext_cmd_type) -+ | addr_cycle -+ | command; -+ /* No data transfer in this case */ -+ info->data_size = 0; -+ exec_cmd = 1; -+ } - break; - - case NAND_CMD_PAGEPROG: -@@ -769,13 +783,40 @@ static int prepare_set_command(struct px - break; - } - -- info->ndcb0 |= NDCB0_CMD_TYPE(0x1) -- | NDCB0_AUTO_RS -- | NDCB0_ST_ROW_EN -- | NDCB0_DBC -- | (NAND_CMD_PAGEPROG << 8) -- | NAND_CMD_SEQIN -- | addr_cycle; -+ /* Second command setting for large pages */ -+ if (mtd->writesize > PAGE_CHUNK_SIZE) { -+ /* -+ * Multiple page write uses the 'extended command' -+ * field. This can be used to issue a command dispatch -+ * or a naked-write depending on the current stage. -+ */ -+ info->ndcb0 |= NDCB0_CMD_TYPE(0x1) -+ | NDCB0_LEN_OVRD -+ | NDCB0_EXT_CMD_TYPE(ext_cmd_type); -+ info->ndcb3 = info->chunk_size + -+ info->oob_size; -+ -+ /* -+ * This is the command dispatch that completes a chunked -+ * page program operation. -+ */ -+ if (info->data_size == 0) { -+ info->ndcb0 = NDCB0_CMD_TYPE(0x1) -+ | NDCB0_EXT_CMD_TYPE(ext_cmd_type) -+ | command; -+ info->ndcb1 = 0; -+ info->ndcb2 = 0; -+ info->ndcb3 = 0; -+ } -+ } else { -+ info->ndcb0 |= NDCB0_CMD_TYPE(0x1) -+ | NDCB0_AUTO_RS -+ | NDCB0_ST_ROW_EN -+ | NDCB0_DBC -+ | (NAND_CMD_PAGEPROG << 8) -+ | NAND_CMD_SEQIN -+ | addr_cycle; -+ } - break; - - case NAND_CMD_PARAM: -@@ -919,8 +960,15 @@ static void armada370_nand_cmdfunc(struc - case NAND_CMD_READOOB: - ext_cmd_type = EXT_CMD_TYPE_MONO; - break; -+ case NAND_CMD_SEQIN: -+ ext_cmd_type = EXT_CMD_TYPE_DISPATCH; -+ break; -+ case NAND_CMD_PAGEPROG: -+ ext_cmd_type = EXT_CMD_TYPE_NAKED_RW; -+ break; - default: - ext_cmd_type = 0; -+ break; - } - - prepare_start_command(info, command); -@@ -958,7 +1006,16 @@ static void armada370_nand_cmdfunc(struc - } - - /* Check if the sequence is complete */ -- if (info->data_size == 0) -+ if (info->data_size == 0 && command != NAND_CMD_PAGEPROG) -+ break; -+ -+ /* -+ * After a splitted program command sequence has issued -+ * the command dispatch, the command sequence is complete. -+ */ -+ if (info->data_size == 0 && -+ command == NAND_CMD_PAGEPROG && -+ ext_cmd_type == EXT_CMD_TYPE_DISPATCH) - break; - - if (command == NAND_CMD_READ0 || command == NAND_CMD_READOOB) { -@@ -967,6 +1024,14 @@ static void armada370_nand_cmdfunc(struc - ext_cmd_type = EXT_CMD_TYPE_LAST_RW; - else - ext_cmd_type = EXT_CMD_TYPE_NAKED_RW; -+ -+ /* -+ * If a splitted program command has no more data to transfer, -+ * the command dispatch must be issued to complete. -+ */ -+ } else if (command == NAND_CMD_PAGEPROG && -+ info->data_size == 0) { -+ ext_cmd_type = EXT_CMD_TYPE_DISPATCH; - } - } while (1); - diff --git a/target/linux/mvebu/patches-3.10/0153-mtd-nand-pxa3xx-Add-ECC-BCH-correctable-errors-detec.patch b/target/linux/mvebu/patches-3.10/0153-mtd-nand-pxa3xx-Add-ECC-BCH-correctable-errors-detec.patch deleted file mode 100644 index fa68e5b033..0000000000 --- a/target/linux/mvebu/patches-3.10/0153-mtd-nand-pxa3xx-Add-ECC-BCH-correctable-errors-detec.patch +++ /dev/null @@ -1,144 +0,0 @@ -From 26d82e0081aa6f0c7db5e4bb5b154b7c528cb8d6 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Thu, 14 Nov 2013 18:25:39 -0300 -Subject: [PATCH 153/203] mtd: nand: pxa3xx: Add ECC BCH correctable errors - detection - -This commit extends the ECC correctable error detection to include -ECC BCH errors. The number of BCH correctable errors can be any up to 16, -and the actual value is exposed in the NDSR register. - -Therefore, we change some symbol names to refer to correctable or -uncorrectable (instead of single-bit or double-bit as it was in the -Hamming case) and while at it, cleanup the detection code slightly. - -Signed-off-by: Ezequiel Garcia -Tested-by: Daniel Mack -Signed-off-by: Brian Norris ---- - drivers/mtd/nand/pxa3xx_nand.c | 57 ++++++++++++++++++++++++++---------------- - 1 file changed, 35 insertions(+), 22 deletions(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -85,6 +85,9 @@ - #define NDCR_INT_MASK (0xFFF) - - #define NDSR_MASK (0xfff) -+#define NDSR_ERR_CNT_OFF (16) -+#define NDSR_ERR_CNT_MASK (0x1f) -+#define NDSR_ERR_CNT(sr) ((sr >> NDSR_ERR_CNT_OFF) & NDSR_ERR_CNT_MASK) - #define NDSR_RDY (0x1 << 12) - #define NDSR_FLASH_RDY (0x1 << 11) - #define NDSR_CS0_PAGED (0x1 << 10) -@@ -93,8 +96,8 @@ - #define NDSR_CS1_CMDD (0x1 << 7) - #define NDSR_CS0_BBD (0x1 << 6) - #define NDSR_CS1_BBD (0x1 << 5) --#define NDSR_DBERR (0x1 << 4) --#define NDSR_SBERR (0x1 << 3) -+#define NDSR_UNCORERR (0x1 << 4) -+#define NDSR_CORERR (0x1 << 3) - #define NDSR_WRDREQ (0x1 << 2) - #define NDSR_RDDREQ (0x1 << 1) - #define NDSR_WRCMDREQ (0x1) -@@ -135,9 +138,9 @@ enum { - ERR_NONE = 0, - ERR_DMABUSERR = -1, - ERR_SENDCMD = -2, -- ERR_DBERR = -3, -+ ERR_UNCORERR = -3, - ERR_BBERR = -4, -- ERR_SBERR = -5, -+ ERR_CORERR = -5, - }; - - enum { -@@ -221,6 +224,8 @@ struct pxa3xx_nand_info { - unsigned int oob_size; - unsigned int spare_size; - unsigned int ecc_size; -+ unsigned int ecc_err_cnt; -+ unsigned int max_bitflips; - int retcode; - - /* cached register value */ -@@ -571,10 +576,25 @@ static irqreturn_t pxa3xx_nand_irq(int i - - status = nand_readl(info, NDSR); - -- if (status & NDSR_DBERR) -- info->retcode = ERR_DBERR; -- if (status & NDSR_SBERR) -- info->retcode = ERR_SBERR; -+ if (status & NDSR_UNCORERR) -+ info->retcode = ERR_UNCORERR; -+ if (status & NDSR_CORERR) { -+ info->retcode = ERR_CORERR; -+ if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370 && -+ info->ecc_bch) -+ info->ecc_err_cnt = NDSR_ERR_CNT(status); -+ else -+ info->ecc_err_cnt = 1; -+ -+ /* -+ * Each chunk composing a page is corrected independently, -+ * and we need to store maximum number of corrected bitflips -+ * to return it to the MTD layer in ecc.read_page(). -+ */ -+ info->max_bitflips = max_t(unsigned int, -+ info->max_bitflips, -+ info->ecc_err_cnt); -+ } - if (status & (NDSR_RDDREQ | NDSR_WRDREQ)) { - /* whether use dma to transfer data */ - if (info->use_dma) { -@@ -672,6 +692,7 @@ static void prepare_start_command(struct - info->use_ecc = 0; - info->use_spare = 1; - info->retcode = ERR_NONE; -+ info->ecc_err_cnt = 0; - info->ndcb3 = 0; - - switch (command) { -@@ -1053,26 +1074,18 @@ static int pxa3xx_nand_read_page_hwecc(s - { - struct pxa3xx_nand_host *host = mtd->priv; - struct pxa3xx_nand_info *info = host->info_data; -- int max_bitflips = 0; - - chip->read_buf(mtd, buf, mtd->writesize); - chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); - -- if (info->retcode == ERR_SBERR) { -- switch (info->use_ecc) { -- case 1: -- max_bitflips = 1; -- mtd->ecc_stats.corrected++; -- break; -- case 0: -- default: -- break; -- } -- } else if (info->retcode == ERR_DBERR) { -+ if (info->retcode == ERR_CORERR && info->use_ecc) { -+ mtd->ecc_stats.corrected += info->ecc_err_cnt; -+ -+ } else if (info->retcode == ERR_UNCORERR) { - /* - * for blank page (all 0xff), HW will calculate its ECC as - * 0, which is different from the ECC information within -- * OOB, ignore such double bit errors -+ * OOB, ignore such uncorrectable errors - */ - if (is_buf_blank(buf, mtd->writesize)) - info->retcode = ERR_NONE; -@@ -1080,7 +1093,7 @@ static int pxa3xx_nand_read_page_hwecc(s - mtd->ecc_stats.failed++; - } - -- return max_bitflips; -+ return info->max_bitflips; - } - - static uint8_t pxa3xx_nand_read_byte(struct mtd_info *mtd) diff --git a/target/linux/mvebu/patches-3.10/0154-mtd-nand-pxa3xx-make-ECC-configuration-checks-more-e.patch b/target/linux/mvebu/patches-3.10/0154-mtd-nand-pxa3xx-make-ECC-configuration-checks-more-e.patch deleted file mode 100644 index 8d9d21ac0a..0000000000 --- a/target/linux/mvebu/patches-3.10/0154-mtd-nand-pxa3xx-make-ECC-configuration-checks-more-e.patch +++ /dev/null @@ -1,67 +0,0 @@ -From c312e183e96bed3b727888673d4b6b54b8e6283e Mon Sep 17 00:00:00 2001 -From: Brian Norris -Date: Thu, 14 Nov 2013 14:41:32 -0800 -Subject: [PATCH 154/203] mtd: nand: pxa3xx: make ECC configuration checks more - explicit - -The Armada BCH configuration in this driver uses one of the two -following ECC schemes: - - 16-bit correction per 2048 bytes - 16-bit correction per 1024 bytes - -These are sufficient for mapping to the 4-bit per 512-bytes and 8-bit -per 512-bytes (respectively) minimum correctability requirements of many -common NAND. - -The current code only checks for the required strength (4-bit or 8-bit) -without checking the ECC step size that is associated with that strength -(and simply assumes it is 512). While that is often a safe assumption to -make, let's make it explicit, since we have that information. - -Signed-off-by: Brian Norris -Acked-by: Ezequiel Garcia -Tested-by: Daniel Mack ---- - drivers/mtd/nand/pxa3xx_nand.c | 15 ++++++++++++--- - 1 file changed, 12 insertions(+), 3 deletions(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -1364,9 +1364,13 @@ static int pxa_ecc_init(struct pxa3xx_na - - static int armada370_ecc_init(struct pxa3xx_nand_info *info, - struct nand_ecc_ctrl *ecc, -- int strength, int page_size) -+ int strength, int ecc_stepsize, int page_size) - { -- if (strength == 4 && page_size == 4096) { -+ /* -+ * Required ECC: 4-bit correction per 512 bytes -+ * Select: 16-bit correction per 2048 bytes -+ */ -+ if (strength == 4 && ecc_stepsize == 512 && page_size == 4096) { - info->ecc_bch = 1; - info->chunk_size = 2048; - info->spare_size = 32; -@@ -1377,7 +1381,11 @@ static int armada370_ecc_init(struct pxa - ecc->strength = 16; - return 1; - -- } else if (strength == 8 && page_size == 4096) { -+ /* -+ * Required ECC: 8-bit correction per 512 bytes -+ * Select: 16-bit correction per 1024 bytes -+ */ -+ } else if (strength == 8 && ecc_stepsize == 512 && page_size == 4096) { - info->ecc_bch = 1; - info->chunk_size = 1024; - info->spare_size = 0; -@@ -1485,6 +1493,7 @@ KEEP_CONFIG: - if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370) - ret = armada370_ecc_init(info, &chip->ecc, - chip->ecc_strength_ds, -+ chip->ecc_step_ds, - mtd->writesize); - else - ret = pxa_ecc_init(info, &chip->ecc, diff --git a/target/linux/mvebu/patches-3.10/0155-mtd-nand-pxa3xx-Use-info-use_dma-to-release-DMA-reso.patch b/target/linux/mvebu/patches-3.10/0155-mtd-nand-pxa3xx-Use-info-use_dma-to-release-DMA-reso.patch deleted file mode 100644 index d86cc9bf85..0000000000 --- a/target/linux/mvebu/patches-3.10/0155-mtd-nand-pxa3xx-Use-info-use_dma-to-release-DMA-reso.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 4c6bade4cf80d77decc5ea89fbaadff8b008f5e9 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Mon, 25 Nov 2013 12:35:28 -0300 -Subject: [PATCH 155/203] mtd: nand: pxa3xx: Use info->use_dma to release DMA - resources - -After the driver allocates all DMA resources, it sets "info->use_dma". -Therefore, we need to check that variable to decide which resources -needs to be freed, instead of the global use_dma variable. - -Without this change, when the device probe fails, the driver will try -to release unallocated DMA resources, with nasty results. - -Signed-off-by: Ezequiel Garcia ---- - drivers/mtd/nand/pxa3xx_nand.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -1288,7 +1288,7 @@ static int pxa3xx_nand_init_buff(struct - static void pxa3xx_nand_free_buff(struct pxa3xx_nand_info *info) - { - struct platform_device *pdev = info->pdev; -- if (use_dma) { -+ if (info->use_dma) { - pxa_free_dma(info->data_dma_ch); - dma_free_coherent(&pdev->dev, info->buf_size, - info->data_buff, info->data_buff_phys); diff --git a/target/linux/mvebu/patches-3.10/0156-mtd-nand-pxa3xx-Use-extended-cmdfunc-only-if-needed.patch b/target/linux/mvebu/patches-3.10/0156-mtd-nand-pxa3xx-Use-extended-cmdfunc-only-if-needed.patch deleted file mode 100644 index 7b14da8cea..0000000000 --- a/target/linux/mvebu/patches-3.10/0156-mtd-nand-pxa3xx-Use-extended-cmdfunc-only-if-needed.patch +++ /dev/null @@ -1,89 +0,0 @@ -From a701d8e1c4c1e31a208dae616ed9067ba4e90191 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Mon, 25 Nov 2013 11:02:51 -0300 -Subject: [PATCH 156/203] mtd: nand: pxa3xx: Use extended cmdfunc() only if - needed - -Currently, we have two different cmdfunc's implementations: -one for PXA3xx SoC variant and one for Armada 370/XP SoC variant. - -The former is the legacy one, typically constrained to devices -with page sizes smaller or equal to the controller's FIFO buffer. -On the other side, the latter _only_ supports the so-called extended -command semantics, which allow to handle devices with larger -page sizes (4 KiB, 8 KiB, ...). - -This means we currently don't support devices with smaller pages on the -A370/XP SoC. Fix it by first renaming the cmdfuncs variants, and then -make the choice based on device page size (and SoC variant), rather than -SoC variant alone. - -While at it, add a check for page size, to make sure we don't allow larger -pages sizes on the PXA3xx variant. - -Signed-off-by: Ezequiel Garcia ---- - drivers/mtd/nand/pxa3xx_nand.c | 31 +++++++++++++++++++++---------- - 1 file changed, 21 insertions(+), 10 deletions(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -900,8 +900,8 @@ static int prepare_set_command(struct px - return exec_cmd; - } - --static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command, -- int column, int page_addr) -+static void nand_cmdfunc(struct mtd_info *mtd, unsigned command, -+ int column, int page_addr) - { - struct pxa3xx_nand_host *host = mtd->priv; - struct pxa3xx_nand_info *info = host->info_data; -@@ -948,9 +948,9 @@ static void pxa3xx_nand_cmdfunc(struct m - info->state = STATE_IDLE; - } - --static void armada370_nand_cmdfunc(struct mtd_info *mtd, -- const unsigned command, -- int column, int page_addr) -+static void nand_cmdfunc_extended(struct mtd_info *mtd, -+ const unsigned command, -+ int column, int page_addr) - { - struct pxa3xx_nand_host *host = mtd->priv; - struct pxa3xx_nand_info *info = host->info_data; -@@ -1490,6 +1490,21 @@ KEEP_CONFIG: - chip->bbt_md = &bbt_mirror_descr; - } - -+ /* -+ * If the page size is bigger than the FIFO size, let's check -+ * we are given the right variant and then switch to the extended -+ * (aka splitted) command handling, -+ */ -+ if (mtd->writesize > PAGE_CHUNK_SIZE) { -+ if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370) { -+ chip->cmdfunc = nand_cmdfunc_extended; -+ } else { -+ dev_err(&info->pdev->dev, -+ "unsupported page size on this variant\n"); -+ return -ENODEV; -+ } -+ } -+ - if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370) - ret = armada370_ecc_init(info, &chip->ecc, - chip->ecc_strength_ds, -@@ -1569,11 +1584,7 @@ static int alloc_nand_resource(struct pl - chip->read_buf = pxa3xx_nand_read_buf; - chip->write_buf = pxa3xx_nand_write_buf; - chip->options |= NAND_NO_SUBPAGE_WRITE; -- -- if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370) -- chip->cmdfunc = armada370_nand_cmdfunc; -- else -- chip->cmdfunc = pxa3xx_nand_cmdfunc; -+ chip->cmdfunc = nand_cmdfunc; - } - - spin_lock_init(&chip->controller->lock); diff --git a/target/linux/mvebu/patches-3.10/0157-mtd-nand-pxa3xx-Consolidate-ECC-initialization.patch b/target/linux/mvebu/patches-3.10/0157-mtd-nand-pxa3xx-Consolidate-ECC-initialization.patch deleted file mode 100644 index 28ec7d8897..0000000000 --- a/target/linux/mvebu/patches-3.10/0157-mtd-nand-pxa3xx-Consolidate-ECC-initialization.patch +++ /dev/null @@ -1,100 +0,0 @@ -From 70c36de37f357f38b5a56292534133d75e7d8870 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Mon, 25 Nov 2013 12:36:18 -0300 -Subject: [PATCH 157/203] mtd: nand: pxa3xx: Consolidate ECC initialization - -In order to avoid code duplication, let's consolidate the ECC setting -for all SoC variants. Such decision is based on page size and ECC -strength requirements. - -Also, provide a default value for the case where such ECC information -is not provided (non-ONFI devices). - -Signed-off-by: Ezequiel Garcia ---- - drivers/mtd/nand/pxa3xx_nand.c | 40 ++++++++++++++++------------------------ - 1 file changed, 16 insertions(+), 24 deletions(-) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -1335,13 +1335,9 @@ static int pxa3xx_nand_sensing(struct px - - static int pxa_ecc_init(struct pxa3xx_nand_info *info, - struct nand_ecc_ctrl *ecc, -- int strength, int page_size) -+ int strength, int ecc_stepsize, int page_size) - { -- /* -- * We don't use strength here as the PXA variant -- * is used with non-ONFI compliant devices. -- */ -- if (page_size == 2048) { -+ if (strength == 1 && ecc_stepsize == 512 && page_size == 2048) { - info->chunk_size = 2048; - info->spare_size = 40; - info->ecc_size = 24; -@@ -1350,7 +1346,7 @@ static int pxa_ecc_init(struct pxa3xx_na - ecc->strength = 1; - return 1; - -- } else if (page_size == 512) { -+ } else if (strength == 1 && ecc_stepsize == 512 && page_size == 512) { - info->chunk_size = 512; - info->spare_size = 8; - info->ecc_size = 8; -@@ -1358,19 +1354,12 @@ static int pxa_ecc_init(struct pxa3xx_na - ecc->size = 512; - ecc->strength = 1; - return 1; -- } -- return 0; --} - --static int armada370_ecc_init(struct pxa3xx_nand_info *info, -- struct nand_ecc_ctrl *ecc, -- int strength, int ecc_stepsize, int page_size) --{ - /* - * Required ECC: 4-bit correction per 512 bytes - * Select: 16-bit correction per 2048 bytes - */ -- if (strength == 4 && ecc_stepsize == 512 && page_size == 4096) { -+ } else if (strength == 4 && ecc_stepsize == 512 && page_size == 4096) { - info->ecc_bch = 1; - info->chunk_size = 2048; - info->spare_size = 32; -@@ -1411,6 +1400,7 @@ static int pxa3xx_nand_scan(struct mtd_i - uint32_t id = -1; - uint64_t chipsize; - int i, ret, num; -+ uint16_t ecc_strength, ecc_step; - - if (pdata->keep_config && !pxa3xx_nand_detect_config(info)) - goto KEEP_CONFIG; -@@ -1505,15 +1495,17 @@ KEEP_CONFIG: - } - } - -- if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370) -- ret = armada370_ecc_init(info, &chip->ecc, -- chip->ecc_strength_ds, -- chip->ecc_step_ds, -- mtd->writesize); -- else -- ret = pxa_ecc_init(info, &chip->ecc, -- chip->ecc_strength_ds, -- mtd->writesize); -+ ecc_strength = chip->ecc_strength_ds; -+ ecc_step = chip->ecc_step_ds; -+ -+ /* Set default ECC strength requirements on non-ONFI devices */ -+ if (ecc_strength < 1 && ecc_step < 1) { -+ ecc_strength = 1; -+ ecc_step = 512; -+ } -+ -+ ret = pxa_ecc_init(info, &chip->ecc, ecc_strength, -+ ecc_step, mtd->writesize); - if (!ret) { - dev_err(&info->pdev->dev, - "ECC strength %d at page size %d is not supported\n", diff --git a/target/linux/mvebu/patches-3.10/0158-mtd-nand-Allow-to-build-pxa3xx_nand-on-Orion-platfor.patch b/target/linux/mvebu/patches-3.10/0158-mtd-nand-Allow-to-build-pxa3xx_nand-on-Orion-platfor.patch deleted file mode 100644 index 6ac5a67ffe..0000000000 --- a/target/linux/mvebu/patches-3.10/0158-mtd-nand-Allow-to-build-pxa3xx_nand-on-Orion-platfor.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 933f5de151614aee0f7b1f664f86b04f3773a075 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Mon, 12 Aug 2013 14:14:59 -0300 -Subject: [PATCH 158/203] mtd: nand: Allow to build pxa3xx_nand on Orion - platforms - -The Armada 370 and Armada XP SoC families, selected by PLAT_ORION, -have a Nand Flash Controller (NFC) IP very similar to the one present -in PXA platforms. Therefore, we want to build this driver on PLAT_ORION. - -Signed-off-by: Ezequiel Garcia -Tested-by: Daniel Mack -Signed-off-by: Brian Norris -Signed-off-by: David Woodhouse ---- - drivers/mtd/nand/Kconfig | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/mtd/nand/Kconfig -+++ b/drivers/mtd/nand/Kconfig -@@ -354,7 +354,7 @@ config MTD_NAND_ATMEL - - config MTD_NAND_PXA3xx - tristate "Support for NAND flash devices on PXA3xx" -- depends on PXA3xx || ARCH_MMP -+ depends on PXA3xx || ARCH_MMP || PLAT_ORION - help - This enables the driver for the NAND flash device found on - PXA3xx processors diff --git a/target/linux/mvebu/patches-3.10/0159-mtd-nand-pxa3xx-Make-config-menu-show-supported-plat.patch b/target/linux/mvebu/patches-3.10/0159-mtd-nand-pxa3xx-Make-config-menu-show-supported-plat.patch deleted file mode 100644 index 001a9ee5a5..0000000000 --- a/target/linux/mvebu/patches-3.10/0159-mtd-nand-pxa3xx-Make-config-menu-show-supported-plat.patch +++ /dev/null @@ -1,31 +0,0 @@ -From b1abf1e5c6a7531a1a93a0ab6c75607dcb0e9947 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Thu, 7 Nov 2013 12:17:11 -0300 -Subject: [PATCH 159/203] mtd: nand: pxa3xx: Make config menu show supported - platforms - -Since we have now support for the NFCv2 controller found on -Armada 370/XP platforms. - -Signed-off-by: Ezequiel Garcia -Signed-off-by: Brian Norris ---- - drivers/mtd/nand/Kconfig | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/mtd/nand/Kconfig -+++ b/drivers/mtd/nand/Kconfig -@@ -353,11 +353,11 @@ config MTD_NAND_ATMEL - on Atmel AT91 and AVR32 processors. - - config MTD_NAND_PXA3xx -- tristate "Support for NAND flash devices on PXA3xx" -+ tristate "NAND support on PXA3xx and Armada 370/XP" - depends on PXA3xx || ARCH_MMP || PLAT_ORION - help - This enables the driver for the NAND flash device found on -- PXA3xx processors -+ PXA3xx processors (NFCv1) and also on Armada 370/XP (NFCv2). - - config MTD_NAND_SLC_LPC32XX - tristate "NXP LPC32xx SLC Controller" diff --git a/target/linux/mvebu/patches-3.10/0160-ARM-mvebu-config-Add-NAND-support.patch b/target/linux/mvebu/patches-3.10/0160-ARM-mvebu-config-Add-NAND-support.patch deleted file mode 100644 index 4edcaf2d96..0000000000 --- a/target/linux/mvebu/patches-3.10/0160-ARM-mvebu-config-Add-NAND-support.patch +++ /dev/null @@ -1,24 +0,0 @@ -From a18945a7fd26b83c765b60bcffe306421f7efe80 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Mon, 2 Dec 2013 18:44:40 -0300 -Subject: [PATCH 160/203] ARM: mvebu: config: Add NAND support - -Enable the pxa3xx-nand driver, which now supports the NAND controller -in Armada 370/XP SoC. - -Signed-off-by: Ezequiel Garcia ---- - arch/arm/configs/mvebu_defconfig | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/arch/arm/configs/mvebu_defconfig -+++ b/arch/arm/configs/mvebu_defconfig -@@ -53,6 +53,8 @@ CONFIG_MTD_CFI_INTELEXT=y - CONFIG_MTD_CFI_AMDSTD=y - CONFIG_MTD_CFI_STAA=y - CONFIG_MTD_PHYSMAP_OF=y -+CONFIG_MTD_NAND=y -+CONFIG_MTD_NAND_PXA3xx=y - CONFIG_SERIAL_8250_DW=y - CONFIG_GPIOLIB=y - CONFIG_GPIO_SYSFS=y diff --git a/target/linux/mvebu/patches-3.10/0161-net-mvneta-Fix-incorrect-DMA-unmapping-size.patch b/target/linux/mvebu/patches-3.10/0161-net-mvneta-Fix-incorrect-DMA-unmapping-size.patch deleted file mode 100644 index f5d600f86a..0000000000 --- a/target/linux/mvebu/patches-3.10/0161-net-mvneta-Fix-incorrect-DMA-unmapping-size.patch +++ /dev/null @@ -1,69 +0,0 @@ -From f834da3962eaee5d72f152e9a066c06ec0d9c2c4 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Thu, 5 Dec 2013 13:35:37 -0300 -Subject: [PATCH 161/203] net: mvneta: Fix incorrect DMA unmapping size - -The current code unmaps the DMA mapping created for rx skb_buff's by -using the data_size as the the mapping size. This is wrong since the -correct size to specify should match the size used to create the mapping. - -This commit removes the following DMA_API_DEBUG warning: - -------------[ cut here ]------------ -WARNING: at lib/dma-debug.c:887 check_unmap+0x3a8/0x860() -mvneta d0070000.ethernet: DMA-API: device driver frees DMA memory with different size [device address=0x000000002eb80000] [map size=1600 bytes] [unmap size=66 bytes] -CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.21-01444-ga88ae13-dirty #92 -[] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) -[] (show_stack+0x10/0x14) from [] (warn_slowpath_common+0x48/0x68) -[] (warn_slowpath_common+0x48/0x68) from [] (warn_slowpath_fmt+0x30/0x40) -[] (warn_slowpath_fmt+0x30/0x40) from [] (check_unmap+0x3a8/0x860) -[] (check_unmap+0x3a8/0x860) from [] (debug_dma_unmap_page+0x64/0x70) -[] (debug_dma_unmap_page+0x64/0x70) from [] (mvneta_rx+0xec/0x468) -[] (mvneta_rx+0xec/0x468) from [] (mvneta_poll+0x78/0x16c) -[] (mvneta_poll+0x78/0x16c) from [] (net_rx_action+0x94/0x160) -[] (net_rx_action+0x94/0x160) from [] (__do_softirq+0xe8/0x1d0) -[] (__do_softirq+0xe8/0x1d0) from [] (do_softirq+0x4c/0x58) -[] (do_softirq+0x4c/0x58) from [] (irq_exit+0x58/0x90) -[] (irq_exit+0x58/0x90) from [] (handle_IRQ+0x3c/0x94) -[] (handle_IRQ+0x3c/0x94) from [] (armada_370_xp_handle_irq+0x4c/0xb4) -[] (armada_370_xp_handle_irq+0x4c/0xb4) from [] (__irq_svc+0x40/0x50) -Exception stack(0xc04f1f70 to 0xc04f1fb8) -1f60: c1fe46f8 00000000 00001d92 00001d92 -1f80: c04f0000 c04f0000 c04f84a4 c03e081c c05220e7 00000001 c05220e7 c04f0000 -1fa0: 00000000 c04f1fb8 c000eaf8 c004c048 60000113 ffffffff -[] (__irq_svc+0x40/0x50) from [] (cpu_startup_entry+0x54/0x128) -[] (cpu_startup_entry+0x54/0x128) from [] (start_kernel+0x29c/0x2f0) -[] (start_kernel+0x29c/0x2f0) from [<00008074>] (0x8074) ----[ end trace d4955f6acd178110 ]--- -Mapped at: - [] debug_dma_map_page+0x4c/0x11c - [] mvneta_setup_rxqs+0x398/0x598 - [] mvneta_open+0x40/0x17c - [] __dev_open+0x9c/0x100 - [] __dev_change_flags+0x7c/0x134 - -Signed-off-by: Ezequiel Garcia ---- - drivers/net/ethernet/marvell/mvneta.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/net/ethernet/marvell/mvneta.c -+++ b/drivers/net/ethernet/marvell/mvneta.c -@@ -1341,7 +1341,7 @@ static void mvneta_rxq_drop_pkts(struct - - dev_kfree_skb_any(skb); - dma_unmap_single(pp->dev->dev.parent, rx_desc->buf_phys_addr, -- rx_desc->data_size, DMA_FROM_DEVICE); -+ MVNETA_RX_BUF_SIZE(pp->pkt_size), DMA_FROM_DEVICE); - } - - if (rx_done) -@@ -1387,7 +1387,7 @@ static int mvneta_rx(struct mvneta_port - } - - dma_unmap_single(pp->dev->dev.parent, rx_desc->buf_phys_addr, -- rx_desc->data_size, DMA_FROM_DEVICE); -+ MVNETA_RX_BUF_SIZE(pp->pkt_size), DMA_FROM_DEVICE); - - rx_bytes = rx_desc->data_size - - (ETH_FCS_LEN + MVNETA_MH_SIZE); diff --git a/target/linux/mvebu/patches-3.10/0162-mtd-nand-pxa3xx-Clear-need_wait-flag-when-starting-a.patch b/target/linux/mvebu/patches-3.10/0162-mtd-nand-pxa3xx-Clear-need_wait-flag-when-starting-a.patch deleted file mode 100644 index 5665ca13e6..0000000000 --- a/target/linux/mvebu/patches-3.10/0162-mtd-nand-pxa3xx-Clear-need_wait-flag-when-starting-a.patch +++ /dev/null @@ -1,50 +0,0 @@ -From 7efaa8677ffd07d54d0122b5e92f29b74a36ad39 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Thu, 19 Dec 2013 06:08:03 -0300 -Subject: [PATCH 162/203] mtd: nand: pxa3xx: Clear need_wait flag when starting - a command - -Currently the driver assumes all commands will eventually trigger a RnB -transition, and thus a "device is ready" IRQ. - -This assumption means that on every issued command, the dev_ready completion -handler is init'ed and the need_wait flag is set. - -However this is incorrect: some commands (such as NAND_CMD_STATUS) don't -make the device 'busy' and thus a RnB transition never occurs. -Given, the NAND core never calls waitfunc() after such commands, this -is not a problem. - -Therefore, it's possible to only clear the need_wait flag on every command -that is started. - -This fixes a current bug that can be reproduced on PXA boards by writing -blank (all 0xff'ed) to a page: - - 1. The kernel issues NAND_CMD_STATUS and sets need_wait=1. The flag - won't be cleared for this command since no RnB transition is - involved. - - 2. NAND_CMD_PAGEPROG is issued but since the data is blank, the driver - decides not to execute the command (and no IRQ activity is - involved). - - 3. The NAND core calls waitfunc() and waits for the dev_ready - completion, which will never end since the device _is_ already ready. - -Tested-by: Arnaud Ebalard -Signed-off-by: Ezequiel Garcia ---- - drivers/mtd/nand/pxa3xx_nand.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -694,6 +694,7 @@ static void prepare_start_command(struct - info->retcode = ERR_NONE; - info->ecc_err_cnt = 0; - info->ndcb3 = 0; -+ info->need_wait = 0; - - switch (command) { - case NAND_CMD_READ0: diff --git a/target/linux/mvebu/patches-3.10/0163-ARM-mvebu-move-ARMADA_XP_MAX_CPUS-to-armada-370-xp.h.patch b/target/linux/mvebu/patches-3.10/0163-ARM-mvebu-move-ARMADA_XP_MAX_CPUS-to-armada-370-xp.h.patch deleted file mode 100644 index 5f46bc1493..0000000000 --- a/target/linux/mvebu/patches-3.10/0163-ARM-mvebu-move-ARMADA_XP_MAX_CPUS-to-armada-370-xp.h.patch +++ /dev/null @@ -1,39 +0,0 @@ -From b340059540cbc90412f3e7159dc57a178e0effd6 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Wed, 4 Dec 2013 14:28:59 +0100 -Subject: [PATCH 163/203] ARM: mvebu: move ARMADA_XP_MAX_CPUS to - armada-370-xp.h - -The ARMADA_XP_MAX_CPUS definition was in common.h, which as its name -says, is common to all mvebu SoCs. It is more logical to have this XP -specific definition in the already existing armada-370-xp.h header -file. - -Signed-off-by: Thomas Petazzoni ---- - arch/arm/mach-mvebu/armada-370-xp.h | 2 ++ - arch/arm/mach-mvebu/common.h | 2 -- - 2 files changed, 2 insertions(+), 2 deletions(-) - ---- a/arch/arm/mach-mvebu/armada-370-xp.h -+++ b/arch/arm/mach-mvebu/armada-370-xp.h -@@ -18,6 +18,8 @@ - #ifdef CONFIG_SMP - #include - -+#define ARMADA_XP_MAX_CPUS 4 -+ - void armada_mpic_send_doorbell(const struct cpumask *mask, unsigned int irq); - void armada_xp_mpic_smp_cpu_init(void); - #endif ---- a/arch/arm/mach-mvebu/common.h -+++ b/arch/arm/mach-mvebu/common.h -@@ -15,8 +15,6 @@ - #ifndef __ARCH_MVEBU_COMMON_H - #define __ARCH_MVEBU_COMMON_H - --#define ARMADA_XP_MAX_CPUS 4 -- - void mvebu_restart(char mode, const char *cmd); - - void armada_370_xp_init_irq(void); diff --git a/target/linux/mvebu/patches-3.10/0164-ARM-mvebu-fix-register-length-for-Armada-XP-PMSU.patch b/target/linux/mvebu/patches-3.10/0164-ARM-mvebu-fix-register-length-for-Armada-XP-PMSU.patch deleted file mode 100644 index 7b58f61a77..0000000000 --- a/target/linux/mvebu/patches-3.10/0164-ARM-mvebu-fix-register-length-for-Armada-XP-PMSU.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 10208caf7f0ebfb3d6b546aa2ae66e42462551e0 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Wed, 4 Dec 2013 14:37:52 +0100 -Subject: [PATCH 164/203] ARM: mvebu: fix register length for Armada XP PMSU - -The per-CPU PMSU registers documented in the datasheet start at -0x22100 and the last register for CPU3 is at 0x22428. However, the DT -informations use <0x22100 0x430>, which makes the region end at -0x22530 and not 0x22430. - -Moreover, looking at the datasheet, we can see that the registers for -CPU0 start at 0x22100, for CPU1 at 0x22200, for CPU2 at 0x22300 and -for CPU3 at 0x22400. It seems clear that 0x100 bytes of registers have -been used per CPU. - -Therefore, this commit reduces the length of the PMSU per-CPU register -area from the incorrect 0x430 bytes to a more logical 0x400 bytes. - -Signed-off-by: Thomas Petazzoni ---- - arch/arm/boot/dts/armada-xp.dtsi | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/armada-xp.dtsi -+++ b/arch/arm/boot/dts/armada-xp.dtsi -@@ -48,7 +48,7 @@ - - armada-370-xp-pmsu@22000 { - compatible = "marvell,armada-370-xp-pmsu"; -- reg = <0x22100 0x430>, <0x20800 0x20>; -+ reg = <0x22100 0x400>, <0x20800 0x20>; - }; - - serial@12200 { diff --git a/target/linux/mvebu/patches-3.10/0165-ARM-mvebu-make-armada_370_xp_pmsu_init-static.patch b/target/linux/mvebu/patches-3.10/0165-ARM-mvebu-make-armada_370_xp_pmsu_init-static.patch deleted file mode 100644 index 72465a19eb..0000000000 --- a/target/linux/mvebu/patches-3.10/0165-ARM-mvebu-make-armada_370_xp_pmsu_init-static.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 167c442fb9adf4c2e02663a0291c6cfae31bad72 Mon Sep 17 00:00:00 2001 -From: Thomas Petazzoni -Date: Thu, 5 Dec 2013 10:02:25 +0100 -Subject: [PATCH 165/203] ARM: mvebu: make armada_370_xp_pmsu_init() static - -The armada_370_xp_pmsu_init() function is called as an -early_initcall(). Therefore, there is no need to export this function, -and we can make it static. - -Signed-off-by: Thomas Petazzoni ---- - arch/arm/mach-mvebu/common.h | 1 - - arch/arm/mach-mvebu/pmsu.c | 2 +- - 2 files changed, 1 insertion(+), 2 deletions(-) - ---- a/arch/arm/mach-mvebu/common.h -+++ b/arch/arm/mach-mvebu/common.h -@@ -22,7 +22,6 @@ void armada_370_xp_handle_irq(struct pt_ - - void armada_xp_cpu_die(unsigned int cpu); - int armada_370_xp_coherency_init(void); --int armada_370_xp_pmsu_init(void); - void armada_xp_secondary_startup(void); - extern struct smp_operations armada_xp_smp_ops; - #endif ---- a/arch/arm/mach-mvebu/pmsu.c -+++ b/arch/arm/mach-mvebu/pmsu.c -@@ -58,7 +58,7 @@ int armada_xp_boot_cpu(unsigned int cpu_ - } - #endif - --int __init armada_370_xp_pmsu_init(void) -+static int __init armada_370_xp_pmsu_init(void) - { - struct device_node *np; - diff --git a/target/linux/mvebu/patches-3.10/0166-clocksource-armada-370-xp-Use-BIT.patch b/target/linux/mvebu/patches-3.10/0166-clocksource-armada-370-xp-Use-BIT.patch deleted file mode 100644 index 8f07046a17..0000000000 --- a/target/linux/mvebu/patches-3.10/0166-clocksource-armada-370-xp-Use-BIT.patch +++ /dev/null @@ -1,37 +0,0 @@ -From ea331be867c791bca8200e6d707499845d8dfa87 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Tue, 13 Aug 2013 11:43:10 -0300 -Subject: [PATCH 166/203] clocksource: armada-370-xp: Use BIT() - -This is a purely cosmetic commit: we replace hardcoded values that -representing bits by BIT(), which is slightly more readable. - -Signed-off-by: Ezequiel Garcia -Signed-off-by: Daniel Lezcano -Reviewed-by: Andrew Lunn ---- - drivers/clocksource/time-armada-370-xp.c | 12 ++++++------ - 1 file changed, 6 insertions(+), 6 deletions(-) - ---- a/drivers/clocksource/time-armada-370-xp.c -+++ b/drivers/clocksource/time-armada-370-xp.c -@@ -35,13 +35,13 @@ - * Timer block registers. - */ - #define TIMER_CTRL_OFF 0x0000 --#define TIMER0_EN 0x0001 --#define TIMER0_RELOAD_EN 0x0002 --#define TIMER0_25MHZ 0x0800 -+#define TIMER0_EN BIT(0) -+#define TIMER0_RELOAD_EN BIT(1) -+#define TIMER0_25MHZ BIT(11) - #define TIMER0_DIV(div) ((div) << 19) --#define TIMER1_EN 0x0004 --#define TIMER1_RELOAD_EN 0x0008 --#define TIMER1_25MHZ 0x1000 -+#define TIMER1_EN BIT(2) -+#define TIMER1_RELOAD_EN BIT(3) -+#define TIMER1_25MHZ BIT(12) - #define TIMER1_DIV(div) ((div) << 22) - #define TIMER_EVENTS_STATUS 0x0004 - #define TIMER0_CLR_MASK (~0x1) diff --git a/target/linux/mvebu/patches-3.10/0167-clocksource-armada-370-xp-Simplify-TIMER_CTRL-regist.patch b/target/linux/mvebu/patches-3.10/0167-clocksource-armada-370-xp-Simplify-TIMER_CTRL-regist.patch deleted file mode 100644 index 109d52d7c2..0000000000 --- a/target/linux/mvebu/patches-3.10/0167-clocksource-armada-370-xp-Simplify-TIMER_CTRL-regist.patch +++ /dev/null @@ -1,174 +0,0 @@ -From 7a5e03909417ccecc85819837d10cbb6ffe1d759 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Tue, 13 Aug 2013 11:43:11 -0300 -Subject: [PATCH 167/203] clocksource: armada-370-xp: Simplify TIMER_CTRL - register access - -This commit creates two functions to access the TIMER_CTRL register: -one for global one for the per-cpu. This makes the code much more -readable. In addition, since the TIMER_CTRL register is also used for -watchdog, this is preparation work for future thread-safe improvements. - -Acked-by: Gregory CLEMENT -Reviewed-by: Andrew Lunn -Signed-off-by: Ezequiel Garcia -Signed-off-by: Daniel Lezcano ---- - drivers/clocksource/time-armada-370-xp.c | 69 ++++++++++++++------------------ - 1 file changed, 30 insertions(+), 39 deletions(-) - ---- a/drivers/clocksource/time-armada-370-xp.c -+++ b/drivers/clocksource/time-armada-370-xp.c -@@ -71,6 +71,18 @@ static u32 ticks_per_jiffy; - - static struct clock_event_device __percpu **percpu_armada_370_xp_evt; - -+static void timer_ctrl_clrset(u32 clr, u32 set) -+{ -+ writel((readl(timer_base + TIMER_CTRL_OFF) & ~clr) | set, -+ timer_base + TIMER_CTRL_OFF); -+} -+ -+static void local_timer_ctrl_clrset(u32 clr, u32 set) -+{ -+ writel((readl(local_base + TIMER_CTRL_OFF) & ~clr) | set, -+ local_base + TIMER_CTRL_OFF); -+} -+ - static u32 notrace armada_370_xp_read_sched_clock(void) - { - return ~readl(timer_base + TIMER0_VAL_OFF); -@@ -83,7 +95,6 @@ static int - armada_370_xp_clkevt_next_event(unsigned long delta, - struct clock_event_device *dev) - { -- u32 u; - /* - * Clear clockevent timer interrupt. - */ -@@ -97,11 +108,8 @@ armada_370_xp_clkevt_next_event(unsigned - /* - * Enable the timer. - */ -- u = readl(local_base + TIMER_CTRL_OFF); -- u = ((u & ~TIMER0_RELOAD_EN) | TIMER0_EN | -- TIMER0_DIV(TIMER_DIVIDER_SHIFT)); -- writel(u, local_base + TIMER_CTRL_OFF); -- -+ local_timer_ctrl_clrset(TIMER0_RELOAD_EN, -+ TIMER0_EN | TIMER0_DIV(TIMER_DIVIDER_SHIFT)); - return 0; - } - -@@ -109,8 +117,6 @@ static void - armada_370_xp_clkevt_mode(enum clock_event_mode mode, - struct clock_event_device *dev) - { -- u32 u; -- - if (mode == CLOCK_EVT_MODE_PERIODIC) { - - /* -@@ -122,18 +128,14 @@ armada_370_xp_clkevt_mode(enum clock_eve - /* - * Enable timer. - */ -- -- u = readl(local_base + TIMER_CTRL_OFF); -- -- writel((u | TIMER0_EN | TIMER0_RELOAD_EN | -- TIMER0_DIV(TIMER_DIVIDER_SHIFT)), -- local_base + TIMER_CTRL_OFF); -+ local_timer_ctrl_clrset(0, TIMER0_RELOAD_EN | -+ TIMER0_EN | -+ TIMER0_DIV(TIMER_DIVIDER_SHIFT)); - } else { - /* - * Disable timer. - */ -- u = readl(local_base + TIMER_CTRL_OFF); -- writel(u & ~TIMER0_EN, local_base + TIMER_CTRL_OFF); -+ local_timer_ctrl_clrset(TIMER0_EN, 0); - - /* - * ACK pending timer interrupt. -@@ -169,18 +171,18 @@ static irqreturn_t armada_370_xp_timer_i - */ - static int __cpuinit armada_370_xp_timer_setup(struct clock_event_device *evt) - { -- u32 u; -+ u32 clr = 0, set = 0; - int cpu = smp_processor_id(); - - /* Use existing clock_event for cpu 0 */ - if (!smp_processor_id()) - return 0; - -- u = readl(local_base + TIMER_CTRL_OFF); - if (timer25Mhz) -- writel(u | TIMER0_25MHZ, local_base + TIMER_CTRL_OFF); -+ set = TIMER0_25MHZ; - else -- writel(u & ~TIMER0_25MHZ, local_base + TIMER_CTRL_OFF); -+ clr = TIMER0_25MHZ; -+ local_timer_ctrl_clrset(clr, set); - - evt->name = armada_370_xp_clkevt.name; - evt->irq = armada_370_xp_clkevt.irq; -@@ -212,7 +214,7 @@ static struct local_timer_ops armada_370 - - static void __init armada_370_xp_timer_init(struct device_node *np) - { -- u32 u; -+ u32 clr = 0, set = 0; - int res; - - timer_base = of_iomap(np, 0); -@@ -221,29 +223,20 @@ static void __init armada_370_xp_timer_i - - if (of_find_property(np, "marvell,timer-25Mhz", NULL)) { - /* The fixed 25MHz timer is available so let's use it */ -- u = readl(local_base + TIMER_CTRL_OFF); -- writel(u | TIMER0_25MHZ, -- local_base + TIMER_CTRL_OFF); -- u = readl(timer_base + TIMER_CTRL_OFF); -- writel(u | TIMER0_25MHZ, -- timer_base + TIMER_CTRL_OFF); -+ set = TIMER0_25MHZ; - timer_clk = 25000000; - } else { - unsigned long rate = 0; - struct clk *clk = of_clk_get(np, 0); - WARN_ON(IS_ERR(clk)); - rate = clk_get_rate(clk); -- u = readl(local_base + TIMER_CTRL_OFF); -- writel(u & ~(TIMER0_25MHZ), -- local_base + TIMER_CTRL_OFF); -- -- u = readl(timer_base + TIMER_CTRL_OFF); -- writel(u & ~(TIMER0_25MHZ), -- timer_base + TIMER_CTRL_OFF); -- - timer_clk = rate / TIMER_DIVIDER; -+ -+ clr = TIMER0_25MHZ; - timer25Mhz = false; - } -+ timer_ctrl_clrset(clr, set); -+ local_timer_ctrl_clrset(clr, set); - - /* - * We use timer 0 as clocksource, and private(local) timer 0 -@@ -265,10 +258,8 @@ static void __init armada_370_xp_timer_i - writel(0xffffffff, timer_base + TIMER0_VAL_OFF); - writel(0xffffffff, timer_base + TIMER0_RELOAD_OFF); - -- u = readl(timer_base + TIMER_CTRL_OFF); -- -- writel((u | TIMER0_EN | TIMER0_RELOAD_EN | -- TIMER0_DIV(TIMER_DIVIDER_SHIFT)), timer_base + TIMER_CTRL_OFF); -+ timer_ctrl_clrset(0, TIMER0_EN | TIMER0_RELOAD_EN | -+ TIMER0_DIV(TIMER_DIVIDER_SHIFT)); - - clocksource_mmio_init(timer_base + TIMER0_VAL_OFF, - "armada_370_xp_clocksource", diff --git a/target/linux/mvebu/patches-3.10/0168-clocksource-armada-370-xp-Introduce-new-compatibles.patch b/target/linux/mvebu/patches-3.10/0168-clocksource-armada-370-xp-Introduce-new-compatibles.patch deleted file mode 100644 index f028dfabc0..0000000000 --- a/target/linux/mvebu/patches-3.10/0168-clocksource-armada-370-xp-Introduce-new-compatibles.patch +++ /dev/null @@ -1,101 +0,0 @@ -From 9cb47bf175645d15f97e6d964dd4a4f089275ef5 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Tue, 13 Aug 2013 11:43:13 -0300 -Subject: [PATCH 168/203] clocksource: armada-370-xp: Introduce new compatibles - -The Armada XP SoC clocksource driver cannot work without the 25 MHz -fixed timer. Therefore it's appropriate to introduce a new compatible -string and use it to set the 25 MHz fixed timer. - -The 'marvell,timer-25MHz' property will be marked as deprecated. - -Signed-off-by: Ezequiel Garcia -Signed-off-by: Daniel Lezcano -Reviewed-by: Andrew Lunn ---- - drivers/clocksource/time-armada-370-xp.c | 54 +++++++++++++++++++++++--------- - 1 file changed, 39 insertions(+), 15 deletions(-) - ---- a/drivers/clocksource/time-armada-370-xp.c -+++ b/drivers/clocksource/time-armada-370-xp.c -@@ -13,6 +13,19 @@ - * - * Timer 0 is used as free-running clocksource, while timer 1 is - * used as clock_event_device. -+ * -+ * --- -+ * Clocksource driver for Armada 370 and Armada XP SoC. -+ * This driver implements one compatible string for each SoC, given -+ * each has its own characteristics: -+ * -+ * * Armada 370 has no 25 MHz fixed timer. -+ * -+ * * Armada XP cannot work properly without such 25 MHz fixed timer as -+ * doing otherwise leads to using a clocksource whose frequency varies -+ * when doing cpufreq frequency changes. -+ * -+ * See Documentation/devicetree/bindings/timer/marvell,armada-370-xp-timer.txt - */ - - #include -@@ -212,7 +225,7 @@ static struct local_timer_ops armada_370 - .stop = armada_370_xp_timer_stop, - }; - --static void __init armada_370_xp_timer_init(struct device_node *np) -+static void __init armada_370_xp_timer_common_init(struct device_node *np) - { - u32 clr = 0, set = 0; - int res; -@@ -221,20 +234,10 @@ static void __init armada_370_xp_timer_i - WARN_ON(!timer_base); - local_base = of_iomap(np, 1); - -- if (of_find_property(np, "marvell,timer-25Mhz", NULL)) { -- /* The fixed 25MHz timer is available so let's use it */ -+ if (timer25Mhz) - set = TIMER0_25MHZ; -- timer_clk = 25000000; -- } else { -- unsigned long rate = 0; -- struct clk *clk = of_clk_get(np, 0); -- WARN_ON(IS_ERR(clk)); -- rate = clk_get_rate(clk); -- timer_clk = rate / TIMER_DIVIDER; -- -+ else - clr = TIMER0_25MHZ; -- timer25Mhz = false; -- } - timer_ctrl_clrset(clr, set); - local_timer_ctrl_clrset(clr, set); - -@@ -288,5 +291,26 @@ static void __init armada_370_xp_timer_i - #endif - } - } --CLOCKSOURCE_OF_DECLARE(armada_370_xp, "marvell,armada-370-xp-timer", -- armada_370_xp_timer_init); -+ -+static void __init armada_xp_timer_init(struct device_node *np) -+{ -+ /* The fixed 25MHz timer is required, timer25Mhz is true by default */ -+ timer_clk = 25000000; -+ -+ armada_370_xp_timer_common_init(np); -+} -+CLOCKSOURCE_OF_DECLARE(armada_xp, "marvell,armada-xp-timer", -+ armada_xp_timer_init); -+ -+static void __init armada_370_timer_init(struct device_node *np) -+{ -+ struct clk *clk = of_clk_get(np, 0); -+ -+ WARN_ON(IS_ERR(clk)); -+ timer_clk = clk_get_rate(clk) / TIMER_DIVIDER; -+ timer25Mhz = false; -+ -+ armada_370_xp_timer_common_init(np); -+} -+CLOCKSOURCE_OF_DECLARE(armada_370, "marvell,armada-370-timer", -+ armada_370_timer_init); diff --git a/target/linux/mvebu/patches-3.10/0169-clocksource-armada-370-xp-Replace-WARN_ON-with-BUG_O.patch b/target/linux/mvebu/patches-3.10/0169-clocksource-armada-370-xp-Replace-WARN_ON-with-BUG_O.patch deleted file mode 100644 index e170760303..0000000000 --- a/target/linux/mvebu/patches-3.10/0169-clocksource-armada-370-xp-Replace-WARN_ON-with-BUG_O.patch +++ /dev/null @@ -1,29 +0,0 @@ -From bcaac3d9265d751f7d20df6ed0ac24241308dff7 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Tue, 20 Aug 2013 12:45:52 -0300 -Subject: [PATCH 169/203] clocksource: armada-370-xp: Replace WARN_ON with - BUG_ON - -If the clock fails to be obtained and the timer fails to be properly -registered, the kernel will freeze real soon. Instead, let's BUG() -where the actual problem is located. - -Signed-off-by: Ezequiel Garcia -Signed-off-by: Daniel Lezcano -Acked-by: Jason Cooper -Acked-by: Gregory CLEMENT ---- - drivers/clocksource/time-armada-370-xp.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/clocksource/time-armada-370-xp.c -+++ b/drivers/clocksource/time-armada-370-xp.c -@@ -306,7 +306,7 @@ static void __init armada_370_timer_init - { - struct clk *clk = of_clk_get(np, 0); - -- WARN_ON(IS_ERR(clk)); -+ BUG_ON(IS_ERR(clk)); - timer_clk = clk_get_rate(clk) / TIMER_DIVIDER; - timer25Mhz = false; - diff --git a/target/linux/mvebu/patches-3.10/0170-clocksource-armada-370-xp-Get-reference-fixed-clock-.patch b/target/linux/mvebu/patches-3.10/0170-clocksource-armada-370-xp-Get-reference-fixed-clock-.patch deleted file mode 100644 index e87f7fc7c5..0000000000 --- a/target/linux/mvebu/patches-3.10/0170-clocksource-armada-370-xp-Get-reference-fixed-clock-.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 7d7214129f7bde5bb55c0691968407b48f08efb5 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Tue, 20 Aug 2013 12:45:53 -0300 -Subject: [PATCH 170/203] clocksource: armada-370-xp: Get reference fixed-clock - by name - -The Armada XP timer has two mandatory clock inputs: nbclk and refclk, -as specified by the device-tree binding. - -This commit fixes the clock selection. Instead of hard-coding the clock -rate for the 25 MHz reference fixed-clock, obtain the clock by its name. - -Signed-off-by: Ezequiel Garcia -Signed-off-by: Daniel Lezcano -Acked-by: Jason Cooper -Acked-by: Gregory CLEMENT ---- - drivers/clocksource/time-armada-370-xp.c | 7 +++++-- - 1 file changed, 5 insertions(+), 2 deletions(-) - ---- a/drivers/clocksource/time-armada-370-xp.c -+++ b/drivers/clocksource/time-armada-370-xp.c -@@ -294,8 +294,11 @@ static void __init armada_370_xp_timer_c - - static void __init armada_xp_timer_init(struct device_node *np) - { -- /* The fixed 25MHz timer is required, timer25Mhz is true by default */ -- timer_clk = 25000000; -+ struct clk *clk = of_clk_get_by_name(np, "fixed"); -+ -+ /* The 25Mhz fixed clock is mandatory, and must always be available */ -+ BUG_ON(IS_ERR(clk)); -+ timer_clk = clk_get_rate(clk); - - armada_370_xp_timer_common_init(np); - } diff --git a/target/linux/mvebu/patches-3.10/0171-clocksource-armada-370-xp-Register-sched_clock-after.patch b/target/linux/mvebu/patches-3.10/0171-clocksource-armada-370-xp-Register-sched_clock-after.patch deleted file mode 100644 index c5b4dcef77..0000000000 --- a/target/linux/mvebu/patches-3.10/0171-clocksource-armada-370-xp-Register-sched_clock-after.patch +++ /dev/null @@ -1,65 +0,0 @@ -From 3d7976bb4a0f34203456cc0e9054b4a6401c9fdb Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Tue, 26 Nov 2013 18:20:14 -0300 -Subject: [PATCH 171/203] clocksource: armada-370-xp: Register sched_clock - after the counter reset - -This commit registers the sched_clock _after_ the counter reset -(instead of before). This removes the timestamp 'jump' in kernel -log messages. - -Before this change: - -[ 0.000000] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 171798691800ns -[ 0.000000] Initializing Coherency fabric -[ 0.000000] Aurora cache controller enabled -[ 0.000000] l2x0: 16 ways, CACHE_ID 0x00000100, AUX_CTRL 0x1a696b12, Cache size: 1024 kB -[ 163.507447] Calibrating delay loop... 1325.05 BogoMIPS (lpj=662528) -[ 163.521419] pid_max: default: 32768 minimum: 301 -[ 163.526185] Mount-cache hash table entries: 512 -[ 163.531095] CPU: Testing write buffer coherency: ok - -After this change: - -[ 0.000000] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 171798691800ns -[ 0.000000] Initializing Coherency fabric -[ 0.000000] Aurora cache controller enabled -[ 0.000000] l2x0: 16 ways, CACHE_ID 0x00000100, AUX_CTRL 0x1a696b12, Cache size: 1024 kB -[ 0.016849] Calibrating delay loop... 1325.05 BogoMIPS (lpj=662528) -[ 0.030820] pid_max: default: 32768 minimum: 301 -[ 0.035588] Mount-cache hash table entries: 512 -[ 0.040500] CPU: Testing write buffer coherency: ok - -Signed-off-by: Ezequiel Garcia -Signed-off-by: Daniel Lezcano -Acked-by: Jason Cooper ---- - drivers/clocksource/time-armada-370-xp.c | 10 +++++----- - 1 file changed, 5 insertions(+), 5 deletions(-) - ---- a/drivers/clocksource/time-armada-370-xp.c -+++ b/drivers/clocksource/time-armada-370-xp.c -@@ -250,11 +250,6 @@ static void __init armada_370_xp_timer_c - ticks_per_jiffy = (timer_clk + HZ / 2) / HZ; - - /* -- * Set scale and timer for sched_clock. -- */ -- setup_sched_clock(armada_370_xp_read_sched_clock, 32, timer_clk); -- -- /* - * Setup free-running clocksource timer (interrupts - * disabled). - */ -@@ -264,6 +259,11 @@ static void __init armada_370_xp_timer_c - timer_ctrl_clrset(0, TIMER0_EN | TIMER0_RELOAD_EN | - TIMER0_DIV(TIMER_DIVIDER_SHIFT)); - -+ /* -+ * Set scale and timer for sched_clock. -+ */ -+ setup_sched_clock(armada_370_xp_read_sched_clock, 32, timer_clk); -+ - clocksource_mmio_init(timer_base + TIMER0_VAL_OFF, - "armada_370_xp_clocksource", - timer_clk, 300, 32, clocksource_mmio_readl_down); diff --git a/target/linux/mvebu/patches-3.10/0172-ARM-mvebu-Fix-the-Armada-370-XP-timer-compatible-str.patch b/target/linux/mvebu/patches-3.10/0172-ARM-mvebu-Fix-the-Armada-370-XP-timer-compatible-str.patch deleted file mode 100644 index de409aa5b7..0000000000 --- a/target/linux/mvebu/patches-3.10/0172-ARM-mvebu-Fix-the-Armada-370-XP-timer-compatible-str.patch +++ /dev/null @@ -1,62 +0,0 @@ -From e33103d8d4cfc513467eb30bc4faee5c91c8e6c2 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Tue, 13 Aug 2013 11:43:15 -0300 -Subject: [PATCH 172/203] ARM: mvebu: Fix the Armada 370/XP timer compatible - strings - -The "marvell,armada-370-xp-timer" compatible string, together with -the "marvell,timer-25Mhz" property are deprecated and should be -removed from current DT. - -Instead, the timer DT nodes are now required to have an appropriate -compatible string, which should be either "marvell,armada-370-timer" -or "marvell,armada-xp-timer", depending on SoC. - -The clock property is now required only for Armada 370 so move it accordingly. - -Signed-off-by: Ezequiel Garcia -Signed-off-by: Jason Cooper ---- - arch/arm/boot/dts/armada-370-xp.dtsi | 2 -- - arch/arm/boot/dts/armada-370.dtsi | 5 +++++ - arch/arm/boot/dts/armada-xp.dtsi | 2 +- - 3 files changed, 6 insertions(+), 3 deletions(-) - ---- a/arch/arm/boot/dts/armada-370-xp.dtsi -+++ b/arch/arm/boot/dts/armada-370-xp.dtsi -@@ -143,10 +143,8 @@ - }; - - timer@20300 { -- compatible = "marvell,armada-370-xp-timer"; - reg = <0x20300 0x30>, <0x21040 0x30>; - interrupts = <37>, <38>, <39>, <40>, <5>, <6>; -- clocks = <&coreclk 2>; - }; - - sata@a0000 { ---- a/arch/arm/boot/dts/armada-370.dtsi -+++ b/arch/arm/boot/dts/armada-370.dtsi -@@ -163,6 +163,11 @@ - interrupts = <91>; - }; - -+ timer@20300 { -+ compatible = "marvell,armada-370-timer"; -+ clocks = <&coreclk 2>; -+ }; -+ - coreclk: mvebu-sar@18230 { - compatible = "marvell,armada-370-core-clock"; - reg = <0x18230 0x08>; ---- a/arch/arm/boot/dts/armada-xp.dtsi -+++ b/arch/arm/boot/dts/armada-xp.dtsi -@@ -69,7 +69,7 @@ - }; - - timer@20300 { -- marvell,timer-25Mhz; -+ compatible = "marvell,armada-xp-timer"; - }; - - coreclk: mvebu-sar@18230 { diff --git a/target/linux/mvebu/patches-3.10/0173-ARM-mvebu-Add-the-reference-25-MHz-fixed-clock-to-Ar.patch b/target/linux/mvebu/patches-3.10/0173-ARM-mvebu-Add-the-reference-25-MHz-fixed-clock-to-Ar.patch deleted file mode 100644 index 4f7dd76cda..0000000000 --- a/target/linux/mvebu/patches-3.10/0173-ARM-mvebu-Add-the-reference-25-MHz-fixed-clock-to-Ar.patch +++ /dev/null @@ -1,34 +0,0 @@ -From e4011be91332bacc5cf166e1ce92c3678fc7c646 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Tue, 20 Aug 2013 12:45:50 -0300 -Subject: [PATCH 173/203] ARM: mvebu: Add the reference 25 MHz fixed-clock to - Armada XP - -The Armada XP SoC has a reference 25 MHz fixed-clock that is used in -some controllers such as the timer and the watchdog. This commit adds -a DT representation of this clock through a fixed-clock compatible node. - -Signed-off-by: Ezequiel Garcia -Reviewed-by: Mike Turquette -Acked-by: Gregory CLEMENT -Signed-off-by: Jason Cooper ---- - arch/arm/boot/dts/armada-xp.dtsi | 9 +++++++++ - 1 file changed, 9 insertions(+) - ---- a/arch/arm/boot/dts/armada-xp.dtsi -+++ b/arch/arm/boot/dts/armada-xp.dtsi -@@ -169,4 +169,13 @@ - }; - }; - }; -+ -+ clocks { -+ /* 25 MHz reference crystal */ -+ refclk: oscillator { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <25000000>; -+ }; -+ }; - }; diff --git a/target/linux/mvebu/patches-3.10/0174-ARM-mvebu-Add-clock-properties-to-Armada-XP-timer-no.patch b/target/linux/mvebu/patches-3.10/0174-ARM-mvebu-Add-clock-properties-to-Armada-XP-timer-no.patch deleted file mode 100644 index 51796bf241..0000000000 --- a/target/linux/mvebu/patches-3.10/0174-ARM-mvebu-Add-clock-properties-to-Armada-XP-timer-no.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 200b303fc6c2709340996b02ae0c9a7130de7ec3 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Tue, 20 Aug 2013 12:45:51 -0300 -Subject: [PATCH 174/203] ARM: mvebu: Add clock properties to Armada XP timer - node - -With the addition of the Armada XP reference clock, we can now model -accurately the available clock inputs for the timer: namely, nbclk -and refclk. For each of this clock inputs we assign a name, for the -driver to select as appropriate. - -Signed-off-by: Ezequiel Garcia -Reviewed-by: Mike Turquette -Acked-by: Gregory CLEMENT -Signed-off-by: Jason Cooper ---- - arch/arm/boot/dts/armada-xp.dtsi | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/arch/arm/boot/dts/armada-xp.dtsi -+++ b/arch/arm/boot/dts/armada-xp.dtsi -@@ -70,6 +70,8 @@ - - timer@20300 { - compatible = "marvell,armada-xp-timer"; -+ clocks = <&coreclk 2>, <&refclk>; -+ clock-names = "nbclk", "fixed"; - }; - - coreclk: mvebu-sar@18230 { diff --git a/target/linux/mvebu/patches-3.10/0175-ARM-mvebu-Relocate-PCIe-node-in-Armada-370-RD-board.patch b/target/linux/mvebu/patches-3.10/0175-ARM-mvebu-Relocate-PCIe-node-in-Armada-370-RD-board.patch deleted file mode 100644 index 3b37ab93e6..0000000000 --- a/target/linux/mvebu/patches-3.10/0175-ARM-mvebu-Relocate-PCIe-node-in-Armada-370-RD-board.patch +++ /dev/null @@ -1,62 +0,0 @@ -From 079d1ecae4bd4166a0f89bcb8e0c96bec1b39622 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Thu, 8 Aug 2013 18:03:09 -0300 -Subject: [PATCH 175/203] ARM: mvebu: Relocate PCIe node in Armada 370 RD board - -The pcie-controller node needs to be relocated according the MBus -DT binding, since it's now a child of the mbus-compatible node. - -Signed-off-by: Ezequiel Garcia -Signed-off-by: Jason Cooper ---- - arch/arm/boot/dts/armada-370-rd.dts | 32 ++++++++++++++++---------------- - 1 file changed, 16 insertions(+), 16 deletions(-) - ---- a/arch/arm/boot/dts/armada-370-rd.dts -+++ b/arch/arm/boot/dts/armada-370-rd.dts -@@ -31,6 +31,22 @@ - ranges = ; - -+ pcie-controller { -+ status = "okay"; -+ -+ /* Internal mini-PCIe connector */ -+ pcie@1,0 { -+ /* Port 0, Lane 0 */ -+ status = "okay"; -+ }; -+ -+ /* Internal mini-PCIe connector */ -+ pcie@2,0 { -+ /* Port 1, Lane 0 */ -+ status = "okay"; -+ }; -+ }; -+ - internal-regs { - serial@12000 { - clock-frequency = <200000000>; -@@ -88,22 +104,6 @@ - gpios = <&gpio0 6 1>; - }; - }; -- -- pcie-controller { -- status = "okay"; -- -- /* Internal mini-PCIe connector */ -- pcie@1,0 { -- /* Port 0, Lane 0 */ -- status = "okay"; -- }; -- -- /* Internal mini-PCIe connector */ -- pcie@2,0 { -- /* Port 1, Lane 0 */ -- status = "okay"; -- }; -- }; - }; - }; - }; diff --git a/target/linux/mvebu/patches-3.10/0176-of-irq-create-interrupts-extended-property.patch b/target/linux/mvebu/patches-3.10/0176-of-irq-create-interrupts-extended-property.patch deleted file mode 100644 index a31d2d0296..0000000000 --- a/target/linux/mvebu/patches-3.10/0176-of-irq-create-interrupts-extended-property.patch +++ /dev/null @@ -1,104 +0,0 @@ -From 6dc29d94d92ccc558b946bd57cd8d7cb19d8def1 Mon Sep 17 00:00:00 2001 -From: Grant Likely -Date: Thu, 19 Dec 2013 09:30:47 -0300 -Subject: [PATCH 176/203] of/irq: create interrupts-extended property - -The standard interrupts property in device tree can only handle -interrupts coming from a single interrupt parent. If a device is wired -to multiple interrupt controllers, then it needs to be attached to a -node with an interrupt-map property to demux the interrupt specifiers -which is confusing. It would be a lot easier if there was a form of the -interrupts property that allows for a separate interrupt phandle for -each interrupt specifier. - -This patch does exactly that by creating a new interrupts-extended -property which reuses the phandle+arguments pattern used by GPIOs and -other core bindings. - -Signed-off-by: Grant Likely -Acked-by: Tony Lindgren -Acked-by: Kumar Gala -[grant.likely: removed versatile platform hunks into separate patch] -Cc: Rob Herring - -Conflicts: - arch/arm/boot/dts/testcases/tests-interrupts.dtsi - drivers/of/selftest.c ---- - .../bindings/interrupt-controller/interrupts.txt | 29 +++++++++++++++++----- - drivers/of/irq.c | 16 ++++++++---- - 2 files changed, 34 insertions(+), 11 deletions(-) - ---- a/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt -+++ b/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt -@@ -4,16 +4,33 @@ Specifying interrupt information for dev - 1) Interrupt client nodes - ------------------------- - --Nodes that describe devices which generate interrupts must contain an --"interrupts" property. This property must contain a list of interrupt --specifiers, one per output interrupt. The format of the interrupt specifier is --determined by the interrupt controller to which the interrupts are routed; see --section 2 below for details. -+Nodes that describe devices which generate interrupts must contain an either an -+"interrupts" property or an "interrupts-extended" property. These properties -+contain a list of interrupt specifiers, one per output interrupt. The format of -+the interrupt specifier is determined by the interrupt controller to which the -+interrupts are routed; see section 2 below for details. -+ -+ Example: -+ interrupt-parent = <&intc1>; -+ interrupts = <5 0>, <6 0>; - - The "interrupt-parent" property is used to specify the controller to which - interrupts are routed and contains a single phandle referring to the interrupt - controller node. This property is inherited, so it may be specified in an --interrupt client node or in any of its parent nodes. -+interrupt client node or in any of its parent nodes. Interrupts listed in the -+"interrupts" property are always in reference to the node's interrupt parent. -+ -+The "interrupts-extended" property is a special form for use when a node needs -+to reference multiple interrupt parents. Each entry in this property contains -+both the parent phandle and the interrupt specifier. "interrupts-extended" -+should only be used when a device has multiple interrupt parents. -+ -+ Example: -+ interrupts-extended = <&intc1 5 1>, <&intc2 1 0>; -+ -+A device node may contain either "interrupts" or "interrupts-extended", but not -+both. If both properties are present, then the operating system should log an -+error and use only the data in "interrupts". - - 2) Interrupt controller nodes - ----------------------------- ---- a/drivers/of/irq.c -+++ b/drivers/of/irq.c -@@ -293,17 +293,23 @@ int of_irq_map_one(struct device_node *d - if (of_irq_workarounds & OF_IMAP_OLDWORLD_MAC) - return of_irq_map_oldworld(device, index, out_irq); - -+ /* Get the reg property (if any) */ -+ addr = of_get_property(device, "reg", NULL); -+ - /* Get the interrupts property */ - intspec = of_get_property(device, "interrupts", &intlen); -- if (intspec == NULL) -- return -EINVAL; -+ if (intspec == NULL) { -+ /* Try the new-style interrupts-extended */ -+ res = of_parse_phandle_with_args(device, "interrupts-extended", -+ "#interrupt-cells", index, out_irq); -+ if (res) -+ return -EINVAL; -+ return of_irq_parse_raw(addr, out_irq); -+ } - intlen /= sizeof(*intspec); - - pr_debug(" intspec=%d intlen=%d\n", be32_to_cpup(intspec), intlen); - -- /* Get the reg property (if any) */ -- addr = of_get_property(device, "reg", NULL); -- - /* Look for the interrupt parent. */ - p = of_irq_find_parent(device); - if (p == NULL) diff --git a/target/linux/mvebu/patches-3.10/0177-of-irq-Avoid-calling-list_first_entry-for-empty-list.patch b/target/linux/mvebu/patches-3.10/0177-of-irq-Avoid-calling-list_first_entry-for-empty-list.patch deleted file mode 100644 index 14b3d13b03..0000000000 --- a/target/linux/mvebu/patches-3.10/0177-of-irq-Avoid-calling-list_first_entry-for-empty-list.patch +++ /dev/null @@ -1,30 +0,0 @@ -From f159ea8ab3bce09a098d0d56c9e8909f385b87aa Mon Sep 17 00:00:00 2001 -From: Axel Lin -Date: Thu, 19 Dec 2013 09:30:48 -0300 -Subject: [PATCH 177/203] of/irq: Avoid calling list_first_entry() for empty - list - -list_first_entry() expects the list is not empty, we need to check if list is -empty before calling list_first_entry(). Thus use list_first_entry_or_null() -instead of list_first_entry(). - -Signed-off-by: Axel Lin -Signed-off-by: Grant Likely ---- - drivers/of/irq.c | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - ---- a/drivers/of/irq.c -+++ b/drivers/of/irq.c -@@ -488,8 +488,9 @@ void __init of_irq_init(const struct of_ - } - - /* Get the next pending parent that might have children */ -- desc = list_first_entry(&intc_parent_list, typeof(*desc), list); -- if (list_empty(&intc_parent_list) || !desc) { -+ desc = list_first_entry_or_null(&intc_parent_list, -+ typeof(*desc), list); -+ if (!desc) { - pr_err("of_irq_init: children remain, but no parents\n"); - break; - } diff --git a/target/linux/mvebu/patches-3.10/0178-of-clean-up-ifdefs-in-of_irq.h.patch b/target/linux/mvebu/patches-3.10/0178-of-clean-up-ifdefs-in-of_irq.h.patch deleted file mode 100644 index 57ea574557..0000000000 --- a/target/linux/mvebu/patches-3.10/0178-of-clean-up-ifdefs-in-of_irq.h.patch +++ /dev/null @@ -1,68 +0,0 @@ -From 704f3796c741df558d624078c5094439c0b65d09 Mon Sep 17 00:00:00 2001 -From: Rob Herring -Date: Thu, 19 Dec 2013 09:30:49 -0300 -Subject: [PATCH 178/203] of: clean-up ifdefs in of_irq.h - -Much of of_irq.h is needlessly ifdef'ed. Clean this up and minimize the -amount ifdef'ed code. This fixes some build warnings when CONFIG_OF -is not enabled (seen on i386 and x86_64): - -include/linux/of_irq.h:82:7: warning: 'struct device_node' declared inside parameter list [enabled by default] -include/linux/of_irq.h:82:7: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] -include/linux/of_irq.h:87:47: warning: 'struct device_node' declared inside parameter list [enabled by default] - -Compile tested on i386, sparc and arm. - -Reported-by: Randy Dunlap -Cc: Grant Likely -Signed-off-by: Rob Herring ---- - include/linux/of_irq.h | 20 ++++++++------------ - 1 file changed, 8 insertions(+), 12 deletions(-) - ---- a/include/linux/of_irq.h -+++ b/include/linux/of_irq.h -@@ -1,8 +1,6 @@ - #ifndef __OF_IRQ_H - #define __OF_IRQ_H - --#if defined(CONFIG_OF) --struct of_irq; - #include - #include - #include -@@ -10,14 +8,6 @@ struct of_irq; - #include - #include - --/* -- * irq_of_parse_and_map() is used by all OF enabled platforms; but SPARC -- * implements it differently. However, the prototype is the same for all, -- * so declare it here regardless of the CONFIG_OF_IRQ setting. -- */ --extern unsigned int irq_of_parse_and_map(struct device_node *node, int index); -- --#if defined(CONFIG_OF_IRQ) - /** - * of_irq - container for device_node/irq_specifier pair for an irq controller - * @controller: pointer to interrupt controller device tree node -@@ -71,11 +61,17 @@ extern int of_irq_to_resource(struct dev - extern int of_irq_count(struct device_node *dev); - extern int of_irq_to_resource_table(struct device_node *dev, - struct resource *res, int nr_irqs); --extern struct device_node *of_irq_find_parent(struct device_node *child); - - extern void of_irq_init(const struct of_device_id *matches); - --#endif /* CONFIG_OF_IRQ */ -+#if defined(CONFIG_OF) -+/* -+ * irq_of_parse_and_map() is used by all OF enabled platforms; but SPARC -+ * implements it differently. However, the prototype is the same for all, -+ * so declare it here regardless of the CONFIG_OF_IRQ setting. -+ */ -+extern unsigned int irq_of_parse_and_map(struct device_node *node, int index); -+extern struct device_node *of_irq_find_parent(struct device_node *child); - - #else /* !CONFIG_OF */ - static inline unsigned int irq_of_parse_and_map(struct device_node *dev, diff --git a/target/linux/mvebu/patches-3.10/0179-of-irq-init-struct-resource-to-0-in-of_irq_to_resour.patch b/target/linux/mvebu/patches-3.10/0179-of-irq-init-struct-resource-to-0-in-of_irq_to_resour.patch deleted file mode 100644 index 1e14dbf453..0000000000 --- a/target/linux/mvebu/patches-3.10/0179-of-irq-init-struct-resource-to-0-in-of_irq_to_resour.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 15a2884ede54118137708ccc72f246fe986f8a57 Mon Sep 17 00:00:00 2001 -From: Sebastian Andrzej Siewior -Date: Thu, 19 Dec 2013 09:30:50 -0300 -Subject: [PATCH 179/203] of/irq: init struct resource to 0 in - of_irq_to_resource() - -It almost does not matter because most users use only the ->start member -of the struct. However if this struct is passed to a platform device -which is then added via platform_device_add() then the ->parent member is -also used. - -Signed-off-by: Sebastian Andrzej Siewior -Signed-off-by: Grant Likely ---- - drivers/of/irq.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/of/irq.c -+++ b/drivers/of/irq.c -@@ -351,6 +351,7 @@ int of_irq_to_resource(struct device_nod - if (r && irq) { - const char *name = NULL; - -+ memset(r, 0, sizeof(*r)); - /* - * Get optional "interrupts-names" property to add a name - * to the resource. diff --git a/target/linux/mvebu/patches-3.10/0180-irq-of-Fix-comment-typo-for-irq_of_parse_and_map.patch b/target/linux/mvebu/patches-3.10/0180-irq-of-Fix-comment-typo-for-irq_of_parse_and_map.patch deleted file mode 100644 index b66a59f6cb..0000000000 --- a/target/linux/mvebu/patches-3.10/0180-irq-of-Fix-comment-typo-for-irq_of_parse_and_map.patch +++ /dev/null @@ -1,24 +0,0 @@ -From 3d73f7a8db8a7506630174d0e8609138d97c8326 Mon Sep 17 00:00:00 2001 -From: Yijing Wang -Date: Thu, 19 Dec 2013 09:30:51 -0300 -Subject: [PATCH 180/203] irq/of: Fix comment typo for irq_of_parse_and_map - -Fix trivial comment typo for irq_of_parse_and_map(). - -Signed-off-by: Yijing Wang -Signed-off-by: Grant Likely ---- - drivers/of/irq.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/of/irq.c -+++ b/drivers/of/irq.c -@@ -28,7 +28,7 @@ - - /** - * irq_of_parse_and_map - Parse and map an interrupt into linux virq space -- * @device: Device node of the device whose interrupt is to be mapped -+ * @dev: Device node of the device whose interrupt is to be mapped - * @index: Index of the interrupt to map - * - * This function is a wrapper that chains of_irq_map_one() and diff --git a/target/linux/mvebu/patches-3.10/0181-of-Fix-dereferencing-node-name-in-debug-output-to-be.patch b/target/linux/mvebu/patches-3.10/0181-of-Fix-dereferencing-node-name-in-debug-output-to-be.patch deleted file mode 100644 index 645bd50de6..0000000000 --- a/target/linux/mvebu/patches-3.10/0181-of-Fix-dereferencing-node-name-in-debug-output-to-be.patch +++ /dev/null @@ -1,82 +0,0 @@ -From 02abb20a226a5a1e5c6dfaaf765dd71a90200cf9 Mon Sep 17 00:00:00 2001 -From: Grant Likely -Date: Thu, 19 Dec 2013 09:30:52 -0300 -Subject: [PATCH 181/203] of: Fix dereferencing node name in debug output to be - safe - -Several locations in the of_address and of_irq code dereference the -full_name parameter from a device_node pointer without checking if the -pointer is valid. This patch switches to use of_node_full_name() which -always checks the pointer. - -Signed-off-by: Grant Likely ---- - drivers/of/address.c | 6 +++--- - drivers/of/irq.c | 8 ++++---- - 2 files changed, 7 insertions(+), 7 deletions(-) - ---- a/drivers/of/address.c -+++ b/drivers/of/address.c -@@ -482,7 +482,7 @@ static u64 __of_translate_address(struct - int na, ns, pna, pns; - u64 result = OF_BAD_ADDR; - -- pr_debug("OF: ** translation for device %s **\n", dev->full_name); -+ pr_debug("OF: ** translation for device %s **\n", of_node_full_name(dev)); - - /* Increase refcount at current level */ - of_node_get(dev); -@@ -497,13 +497,13 @@ static u64 __of_translate_address(struct - bus->count_cells(dev, &na, &ns); - if (!OF_CHECK_COUNTS(na, ns)) { - printk(KERN_ERR "prom_parse: Bad cell count for %s\n", -- dev->full_name); -+ of_node_full_name(dev)); - goto bail; - } - memcpy(addr, in_addr, na * 4); - - pr_debug("OF: bus is %s (na=%d, ns=%d) on %s\n", -- bus->name, na, ns, parent->full_name); -+ bus->name, na, ns, of_node_full_name(parent)); - of_dump_addr("OF: translating address:", addr, na); - - /* Translate */ ---- a/drivers/of/irq.c -+++ b/drivers/of/irq.c -@@ -102,7 +102,7 @@ int of_irq_map_raw(struct device_node *p - int imaplen, match, i; - - pr_debug("of_irq_map_raw: par=%s,intspec=[0x%08x 0x%08x...],ointsize=%d\n", -- parent->full_name, be32_to_cpup(intspec), -+ of_node_full_name(parent), be32_to_cpup(intspec), - be32_to_cpup(intspec + 1), ointsize); - - ipar = of_node_get(parent); -@@ -126,7 +126,7 @@ int of_irq_map_raw(struct device_node *p - goto fail; - } - -- pr_debug("of_irq_map_raw: ipar=%s, size=%d\n", ipar->full_name, intsize); -+ pr_debug("of_irq_map_raw: ipar=%s, size=%d\n", of_node_full_name(ipar), intsize); - - if (ointsize != intsize) - return -EINVAL; -@@ -287,7 +287,7 @@ int of_irq_map_one(struct device_node *d - u32 intsize, intlen; - int res = -EINVAL; - -- pr_debug("of_irq_map_one: dev=%s, index=%d\n", device->full_name, index); -+ pr_debug("of_irq_map_one: dev=%s, index=%d\n", of_node_full_name(device), index); - - /* OldWorld mac stuff is "special", handle out of line */ - if (of_irq_workarounds & OF_IMAP_OLDWORLD_MAC) -@@ -361,7 +361,7 @@ int of_irq_to_resource(struct device_nod - - r->start = r->end = irq; - r->flags = IORESOURCE_IRQ; -- r->name = name ? name : dev->full_name; -+ r->name = name ? name : of_node_full_name(dev); - } - - return irq; diff --git a/target/linux/mvebu/patches-3.10/0182-of-irq-Pass-trigger-type-in-IRQ-resource-flags.patch b/target/linux/mvebu/patches-3.10/0182-of-irq-Pass-trigger-type-in-IRQ-resource-flags.patch deleted file mode 100644 index 5363b2e008..0000000000 --- a/target/linux/mvebu/patches-3.10/0182-of-irq-Pass-trigger-type-in-IRQ-resource-flags.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 4bd60065fb935a5d390c9a442be3a18d2ea18eee Mon Sep 17 00:00:00 2001 -From: Tomasz Figa -Date: Thu, 19 Dec 2013 09:30:53 -0300 -Subject: [PATCH 182/203] of/irq: Pass trigger type in IRQ resource flags - -Some drivers might rely on availability of trigger flags in IRQ -resource, for example to configure the hardware for particular interrupt -type. However current code creating IRQ resources from data in device -tree does not configure trigger flags in resulting resources. - -This patch tries to solve the problem, based on the fact that -irq_of_parse_and_map() configures the trigger based on DT interrupt -specifier and IRQD_TRIGGER_* flags are consistent with IORESOURCE_IRQ_*, -and we can get correct trigger flags by calling irqd_get_trigger_type() -after mapping the interrupt. - -Signed-off-by: Tomasz Figa -[grant.likely: Merged the two assignments to r->flags] -Signed-off-by: Grant Likely ---- - drivers/of/irq.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/of/irq.c -+++ b/drivers/of/irq.c -@@ -360,7 +360,7 @@ int of_irq_to_resource(struct device_nod - &name); - - r->start = r->end = irq; -- r->flags = IORESOURCE_IRQ; -+ r->flags = IORESOURCE_IRQ | irqd_get_trigger_type(irq_get_irq_data(irq)); - r->name = name ? name : of_node_full_name(dev); - } - diff --git a/target/linux/mvebu/patches-3.10/0183-of-irq-Rename-of_irq_map_-functions-to-of_irq_parse_.patch b/target/linux/mvebu/patches-3.10/0183-of-irq-Rename-of_irq_map_-functions-to-of_irq_parse_.patch deleted file mode 100644 index c0245b7081..0000000000 --- a/target/linux/mvebu/patches-3.10/0183-of-irq-Rename-of_irq_map_-functions-to-of_irq_parse_.patch +++ /dev/null @@ -1,682 +0,0 @@ -From fd33285b3dab183df0cea06de9f618886dc0f1c0 Mon Sep 17 00:00:00 2001 -From: Grant Likely -Date: Thu, 19 Dec 2013 09:30:54 -0300 -Subject: [PATCH 183/203] of/irq: Rename of_irq_map_* functions to - of_irq_parse_* - -The OF irq handling code has been overloading the term 'map' to refer to -both parsing the data in the device tree and mapping it to the internal -linux irq system. This is probably because the device tree does have the -concept of an 'interrupt-map' function for translating interrupt -references from one node to another, but 'map' is still confusing when -the primary purpose of some of the functions are to parse the DT data. - -This patch renames all the of_irq_map_* functions to of_irq_parse_* -which makes it clear that there is a difference between the parsing -phase and the mapping phase. Kernel code can make use of just the -parsing or just the mapping support as needed by the subsystem. - -The patch was generated mechanically with a handful of sed commands. - -Signed-off-by: Grant Likely -Acked-by: Michal Simek -Acked-by: Tony Lindgren -Cc: Ralf Baechle -Cc: Benjamin Herrenschmidt - -Conflicts: - arch/arm/mach-integrator/pci_v3.c - arch/mips/pci/pci-rt3883.c ---- - arch/arm/mach-integrator/pci_v3.c | 279 +++++++++++++++++++++++++ - arch/microblaze/pci/pci-common.c | 2 +- - arch/mips/pci/fixup-lantiq.c | 2 +- - arch/powerpc/kernel/pci-common.c | 2 +- - arch/powerpc/platforms/cell/celleb_scc_pciex.c | 2 +- - arch/powerpc/platforms/cell/celleb_scc_sio.c | 2 +- - arch/powerpc/platforms/cell/spider-pic.c | 2 +- - arch/powerpc/platforms/cell/spu_manage.c | 2 +- - arch/powerpc/platforms/fsl_uli1575.c | 2 +- - arch/powerpc/platforms/powermac/pic.c | 2 +- - arch/powerpc/platforms/pseries/event_sources.c | 2 +- - arch/powerpc/sysdev/mpic_msi.c | 2 +- - arch/x86/kernel/devicetree.c | 2 +- - drivers/of/address.c | 4 +- - drivers/of/irq.c | 28 +-- - drivers/of/of_pci_irq.c | 10 +- - drivers/pci/host/pci-mvebu.c | 2 +- - include/linux/of_irq.h | 8 +- - include/linux/of_pci.h | 2 +- - 19 files changed, 318 insertions(+), 39 deletions(-) - ---- a/arch/arm/mach-integrator/pci_v3.c -+++ b/arch/arm/mach-integrator/pci_v3.c -@@ -610,3 +610,282 @@ void __init pci_v3_postinit(void) - - register_isa_ports(PHYS_PCI_MEM_BASE, PHYS_PCI_IO_BASE, 0); - } -+ -+/* -+ * A small note about bridges and interrupts. The DECchip 21050 (and -+ * later) adheres to the PCI-PCI bridge specification. This says that -+ * the interrupts on the other side of a bridge are swizzled in the -+ * following manner: -+ * -+ * Dev Interrupt Interrupt -+ * Pin on Pin on -+ * Device Connector -+ * -+ * 4 A A -+ * B B -+ * C C -+ * D D -+ * -+ * 5 A B -+ * B C -+ * C D -+ * D A -+ * -+ * 6 A C -+ * B D -+ * C A -+ * D B -+ * -+ * 7 A D -+ * B A -+ * C B -+ * D C -+ * -+ * Where A = pin 1, B = pin 2 and so on and pin=0 = default = A. -+ * Thus, each swizzle is ((pin-1) + (device#-4)) % 4 -+ */ -+ -+/* -+ * This routine handles multiple bridges. -+ */ -+static u8 __init pci_v3_swizzle(struct pci_dev *dev, u8 *pinp) -+{ -+ if (*pinp == 0) -+ *pinp = 1; -+ -+ return pci_common_swizzle(dev, pinp); -+} -+ -+static int irq_tab[4] __initdata = { -+ IRQ_AP_PCIINT0, IRQ_AP_PCIINT1, IRQ_AP_PCIINT2, IRQ_AP_PCIINT3 -+}; -+ -+/* -+ * map the specified device/slot/pin to an IRQ. This works out such -+ * that slot 9 pin 1 is INT0, pin 2 is INT1, and slot 10 pin 1 is INT1. -+ */ -+static int __init pci_v3_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -+{ -+ int intnr = ((slot - 9) + (pin - 1)) & 3; -+ -+ return irq_tab[intnr]; -+} -+ -+static struct hw_pci pci_v3 __initdata = { -+ .swizzle = pci_v3_swizzle, -+ .setup = pci_v3_setup, -+ .nr_controllers = 1, -+ .ops = &pci_v3_ops, -+ .preinit = pci_v3_preinit, -+ .postinit = pci_v3_postinit, -+}; -+ -+#ifdef CONFIG_OF -+ -+static int __init pci_v3_map_irq_dt(const struct pci_dev *dev, u8 slot, u8 pin) -+{ -+ struct of_irq oirq; -+ int ret; -+ -+ ret = of_irq_parse_pci(dev, &oirq); -+ if (ret) { -+ dev_err(&dev->dev, "of_irq_parse_pci() %d\n", ret); -+ /* Proper return code 0 == NO_IRQ */ -+ return 0; -+ } -+ -+ return irq_create_of_mapping(oirq.controller, oirq.specifier, -+ oirq.size); -+} -+ -+static int __init pci_v3_dtprobe(struct platform_device *pdev, -+ struct device_node *np) -+{ -+ struct of_pci_range_parser parser; -+ struct of_pci_range range; -+ struct resource *res; -+ int irq, ret; -+ -+ if (of_pci_range_parser_init(&parser, np)) -+ return -EINVAL; -+ -+ /* Get base for bridge registers */ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!res) { -+ dev_err(&pdev->dev, "unable to obtain PCIv3 base\n"); -+ return -ENODEV; -+ } -+ pci_v3_base = devm_ioremap(&pdev->dev, res->start, -+ resource_size(res)); -+ if (!pci_v3_base) { -+ dev_err(&pdev->dev, "unable to remap PCIv3 base\n"); -+ return -ENODEV; -+ } -+ -+ /* Get and request error IRQ resource */ -+ irq = platform_get_irq(pdev, 0); -+ if (irq <= 0) { -+ dev_err(&pdev->dev, "unable to obtain PCIv3 error IRQ\n"); -+ return -ENODEV; -+ } -+ ret = devm_request_irq(&pdev->dev, irq, v3_irq, 0, -+ "PCIv3 error", NULL); -+ if (ret < 0) { -+ dev_err(&pdev->dev, "unable to request PCIv3 error IRQ %d (%d)\n", irq, ret); -+ return ret; -+ } -+ -+ for_each_of_pci_range(&parser, &range) { -+ if (!range.flags) { -+ of_pci_range_to_resource(&range, np, &conf_mem); -+ conf_mem.name = "PCIv3 config"; -+ } -+ if (range.flags & IORESOURCE_IO) { -+ of_pci_range_to_resource(&range, np, &io_mem); -+ io_mem.name = "PCIv3 I/O"; -+ } -+ if ((range.flags & IORESOURCE_MEM) && -+ !(range.flags & IORESOURCE_PREFETCH)) { -+ non_mem_pci = range.pci_addr; -+ non_mem_pci_sz = range.size; -+ of_pci_range_to_resource(&range, np, &non_mem); -+ non_mem.name = "PCIv3 non-prefetched mem"; -+ } -+ if ((range.flags & IORESOURCE_MEM) && -+ (range.flags & IORESOURCE_PREFETCH)) { -+ pre_mem_pci = range.pci_addr; -+ pre_mem_pci_sz = range.size; -+ of_pci_range_to_resource(&range, np, &pre_mem); -+ pre_mem.name = "PCIv3 prefetched mem"; -+ } -+ } -+ -+ if (!conf_mem.start || !io_mem.start || -+ !non_mem.start || !pre_mem.start) { -+ dev_err(&pdev->dev, "missing ranges in device node\n"); -+ return -EINVAL; -+ } -+ -+ pci_v3.map_irq = pci_v3_map_irq_dt; -+ pci_common_init_dev(&pdev->dev, &pci_v3); -+ -+ return 0; -+} -+ -+#else -+ -+static inline int pci_v3_dtprobe(struct platform_device *pdev, -+ struct device_node *np) -+{ -+ return -EINVAL; -+} -+ -+#endif -+ -+static int __init pci_v3_probe(struct platform_device *pdev) -+{ -+ struct device_node *np = pdev->dev.of_node; -+ int ret; -+ -+ /* Remap the Integrator system controller */ -+ ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100); -+ if (!ap_syscon_base) { -+ dev_err(&pdev->dev, "unable to remap the AP syscon for PCIv3\n"); -+ return -ENODEV; -+ } -+ -+ /* Device tree probe path */ -+ if (np) -+ return pci_v3_dtprobe(pdev, np); -+ -+ pci_v3_base = devm_ioremap(&pdev->dev, PHYS_PCI_V3_BASE, SZ_64K); -+ if (!pci_v3_base) { -+ dev_err(&pdev->dev, "unable to remap PCIv3 base\n"); -+ return -ENODEV; -+ } -+ -+ ret = devm_request_irq(&pdev->dev, IRQ_AP_V3INT, v3_irq, 0, "V3", NULL); -+ if (ret) { -+ dev_err(&pdev->dev, "unable to grab PCI error interrupt: %d\n", -+ ret); -+ return -ENODEV; -+ } -+ -+ conf_mem.name = "PCIv3 config"; -+ conf_mem.start = PHYS_PCI_CONFIG_BASE; -+ conf_mem.end = PHYS_PCI_CONFIG_BASE + SZ_16M - 1; -+ conf_mem.flags = IORESOURCE_MEM; -+ -+ io_mem.name = "PCIv3 I/O"; -+ io_mem.start = PHYS_PCI_IO_BASE; -+ io_mem.end = PHYS_PCI_IO_BASE + SZ_16M - 1; -+ io_mem.flags = IORESOURCE_MEM; -+ -+ non_mem_pci = 0x00000000; -+ non_mem_pci_sz = SZ_256M; -+ non_mem.name = "PCIv3 non-prefetched mem"; -+ non_mem.start = PHYS_PCI_MEM_BASE; -+ non_mem.end = PHYS_PCI_MEM_BASE + SZ_256M - 1; -+ non_mem.flags = IORESOURCE_MEM; -+ -+ pre_mem_pci = 0x10000000; -+ pre_mem_pci_sz = SZ_256M; -+ pre_mem.name = "PCIv3 prefetched mem"; -+ pre_mem.start = PHYS_PCI_PRE_BASE + SZ_256M; -+ pre_mem.end = PHYS_PCI_PRE_BASE + SZ_256M - 1; -+ pre_mem.flags = IORESOURCE_MEM | IORESOURCE_PREFETCH; -+ -+ pci_v3.map_irq = pci_v3_map_irq; -+ -+ pci_common_init_dev(&pdev->dev, &pci_v3); -+ -+ return 0; -+} -+ -+static const struct of_device_id pci_ids[] = { -+ { .compatible = "v3,v360epc-pci", }, -+ {}, -+}; -+ -+static struct platform_driver pci_v3_driver = { -+ .driver = { -+ .name = "pci-v3", -+ .of_match_table = pci_ids, -+ }, -+}; -+ -+static int __init pci_v3_init(void) -+{ -+ return platform_driver_probe(&pci_v3_driver, pci_v3_probe); -+} -+ -+subsys_initcall(pci_v3_init); -+ -+/* -+ * Static mappings for the PCIv3 bridge -+ * -+ * e8000000 40000000 PCI memory PHYS_PCI_MEM_BASE (max 512M) -+ * ec000000 61000000 PCI config space PHYS_PCI_CONFIG_BASE (max 16M) -+ * fee00000 60000000 PCI IO PHYS_PCI_IO_BASE (max 16M) -+ */ -+static struct map_desc pci_v3_io_desc[] __initdata __maybe_unused = { -+ { -+ .virtual = (unsigned long)PCI_MEMORY_VADDR, -+ .pfn = __phys_to_pfn(PHYS_PCI_MEM_BASE), -+ .length = SZ_16M, -+ .type = MT_DEVICE -+ }, { -+ .virtual = (unsigned long)PCI_CONFIG_VADDR, -+ .pfn = __phys_to_pfn(PHYS_PCI_CONFIG_BASE), -+ .length = SZ_16M, -+ .type = MT_DEVICE -+ } -+}; -+ -+int __init pci_v3_early_init(void) -+{ -+ iotable_init(pci_v3_io_desc, ARRAY_SIZE(pci_v3_io_desc)); -+ vga_base = (unsigned long)PCI_MEMORY_VADDR; -+ pci_map_io_early(__phys_to_pfn(PHYS_PCI_IO_BASE)); -+ return 0; -+} ---- a/arch/microblaze/pci/pci-common.c -+++ b/arch/microblaze/pci/pci-common.c -@@ -217,7 +217,7 @@ int pci_read_irq_line(struct pci_dev *pc - memset(&oirq, 0xff, sizeof(oirq)); - #endif - /* Try to get a mapping from the device-tree */ -- if (of_irq_map_pci(pci_dev, &oirq)) { -+ if (of_irq_parse_pci(pci_dev, &oirq)) { - u8 line, pin; - - /* If that fails, lets fallback to what is in the config ---- a/arch/mips/pci/fixup-lantiq.c -+++ b/arch/mips/pci/fixup-lantiq.c -@@ -28,7 +28,7 @@ int __init pcibios_map_irq(const struct - struct of_irq dev_irq; - int irq; - -- if (of_irq_map_pci(dev, &dev_irq)) { -+ if (of_irq_parse_pci(dev, &dev_irq)) { - dev_err(&dev->dev, "trying to map irq for unknown slot:%d pin:%d\n", - slot, pin); - return 0; ---- a/arch/powerpc/kernel/pci-common.c -+++ b/arch/powerpc/kernel/pci-common.c -@@ -237,7 +237,7 @@ static int pci_read_irq_line(struct pci_ - memset(&oirq, 0xff, sizeof(oirq)); - #endif - /* Try to get a mapping from the device-tree */ -- if (of_irq_map_pci(pci_dev, &oirq)) { -+ if (of_irq_parse_pci(pci_dev, &oirq)) { - u8 line, pin; - - /* If that fails, lets fallback to what is in the config ---- a/arch/powerpc/platforms/cell/celleb_scc_pciex.c -+++ b/arch/powerpc/platforms/cell/celleb_scc_pciex.c -@@ -507,7 +507,7 @@ static __init int celleb_setup_pciex(str - phb->ops = &scc_pciex_pci_ops; - - /* internal interrupt handler */ -- if (of_irq_map_one(node, 1, &oirq)) { -+ if (of_irq_parse_one(node, 1, &oirq)) { - pr_err("PCIEXC:Failed to map irq\n"); - goto error; - } ---- a/arch/powerpc/platforms/cell/celleb_scc_sio.c -+++ b/arch/powerpc/platforms/cell/celleb_scc_sio.c -@@ -53,7 +53,7 @@ static int __init txx9_serial_init(void) - if (!(txx9_serial_bitmap & (1<host->of_node, 0, &oirq) == 0) { -+ if (of_irq_parse_one(pic->host->of_node, 0, &oirq) == 0) { - virq = irq_create_of_mapping(oirq.controller, oirq.specifier, - oirq.size); - return virq; ---- a/arch/powerpc/platforms/cell/spu_manage.c -+++ b/arch/powerpc/platforms/cell/spu_manage.c -@@ -182,7 +182,7 @@ static int __init spu_map_interrupts(str - int i; - - for (i=0; i < 3; i++) { -- ret = of_irq_map_one(np, i, &oirq); -+ ret = of_irq_parse_one(np, i, &oirq); - if (ret) { - pr_debug("spu_new: failed to get irq %d\n", i); - goto err; ---- a/arch/powerpc/platforms/fsl_uli1575.c -+++ b/arch/powerpc/platforms/fsl_uli1575.c -@@ -333,7 +333,7 @@ static void hpcd_final_uli5288(struct pc - - laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(31, 0) << 8); - laddr[1] = laddr[2] = 0; -- of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq); -+ of_irq_parse_raw(hosenode, &pin, 1, laddr, &oirq); - virq = irq_create_of_mapping(oirq.controller, oirq.specifier, - oirq.size); - dev->irq = virq; ---- a/arch/powerpc/platforms/powermac/pic.c -+++ b/arch/powerpc/platforms/powermac/pic.c -@@ -393,7 +393,7 @@ static void __init pmac_pic_probe_oldsty - #endif - } - --int of_irq_map_oldworld(struct device_node *device, int index, -+int of_irq_parse_oldworld(struct device_node *device, int index, - struct of_irq *out_irq) - { - const u32 *ints = NULL; ---- a/arch/powerpc/platforms/pseries/event_sources.c -+++ b/arch/powerpc/platforms/pseries/event_sources.c -@@ -55,7 +55,7 @@ void request_event_sources_irqs(struct d - /* Else use normal interrupt tree parsing */ - else { - /* First try to do a proper OF tree parsing */ -- for (index = 0; of_irq_map_one(np, index, &oirq) == 0; -+ for (index = 0; of_irq_parse_one(np, index, &oirq) == 0; - index++) { - if (count > 15) - break; ---- a/arch/powerpc/sysdev/mpic_msi.c -+++ b/arch/powerpc/sysdev/mpic_msi.c -@@ -63,7 +63,7 @@ static int mpic_msi_reserve_u3_hwirqs(st - pr_debug("mpic: mapping hwirqs for %s\n", np->full_name); - - index = 0; -- while (of_irq_map_one(np, index++, &oirq) == 0) { -+ while (of_irq_parse_one(np, index++, &oirq) == 0) { - ops->xlate(mpic->irqhost, NULL, oirq.specifier, - oirq.size, &hwirq, &flags); - msi_bitmap_reserve_hwirq(&mpic->msi_bitmap, hwirq); ---- a/arch/x86/kernel/devicetree.c -+++ b/arch/x86/kernel/devicetree.c -@@ -117,7 +117,7 @@ static int x86_of_pci_irq_enable(struct - if (!pin) - return 0; - -- ret = of_irq_map_pci(dev, &oirq); -+ ret = of_irq_parse_pci(dev, &oirq); - if (ret) - return ret; - ---- a/drivers/of/address.c -+++ b/drivers/of/address.c -@@ -525,12 +525,12 @@ static u64 __of_translate_address(struct - pbus->count_cells(dev, &pna, &pns); - if (!OF_CHECK_COUNTS(pna, pns)) { - printk(KERN_ERR "prom_parse: Bad cell count for %s\n", -- dev->full_name); -+ of_node_full_name(dev)); - break; - } - - pr_debug("OF: parent bus is %s (na=%d, ns=%d) on %s\n", -- pbus->name, pna, pns, parent->full_name); -+ pbus->name, pna, pns, of_node_full_name(parent)); - - /* Apply bus translation */ - if (of_translate_one(dev, bus, pbus, addr, na, ns, pna, rprop)) ---- a/drivers/of/irq.c -+++ b/drivers/of/irq.c -@@ -31,14 +31,14 @@ - * @dev: Device node of the device whose interrupt is to be mapped - * @index: Index of the interrupt to map - * -- * This function is a wrapper that chains of_irq_map_one() and -+ * This function is a wrapper that chains of_irq_parse_one() and - * irq_create_of_mapping() to make things easier to callers - */ - unsigned int irq_of_parse_and_map(struct device_node *dev, int index) - { - struct of_irq oirq; - -- if (of_irq_map_one(dev, index, &oirq)) -+ if (of_irq_parse_one(dev, index, &oirq)) - return 0; - - return irq_create_of_mapping(oirq.controller, oirq.specifier, -@@ -79,7 +79,7 @@ struct device_node *of_irq_find_parent(s - } - - /** -- * of_irq_map_raw - Low level interrupt tree parsing -+ * of_irq_parse_raw - Low level interrupt tree parsing - * @parent: the device interrupt parent - * @intspec: interrupt specifier ("interrupts" property of the device) - * @ointsize: size of the passed in interrupt specifier -@@ -93,7 +93,7 @@ struct device_node *of_irq_find_parent(s - * properties, for example when resolving PCI interrupts when no device - * node exist for the parent. - */ --int of_irq_map_raw(struct device_node *parent, const __be32 *intspec, -+int of_irq_parse_raw(struct device_node *parent, const __be32 *intspec, - u32 ointsize, const __be32 *addr, struct of_irq *out_irq) - { - struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL; -@@ -101,7 +101,7 @@ int of_irq_map_raw(struct device_node *p - u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0; - int imaplen, match, i; - -- pr_debug("of_irq_map_raw: par=%s,intspec=[0x%08x 0x%08x...],ointsize=%d\n", -+ pr_debug("of_irq_parse_raw: par=%s,intspec=[0x%08x 0x%08x...],ointsize=%d\n", - of_node_full_name(parent), be32_to_cpup(intspec), - be32_to_cpup(intspec + 1), ointsize); - -@@ -126,7 +126,7 @@ int of_irq_map_raw(struct device_node *p - goto fail; - } - -- pr_debug("of_irq_map_raw: ipar=%s, size=%d\n", of_node_full_name(ipar), intsize); -+ pr_debug("of_irq_parse_raw: ipar=%s, size=%d\n", of_node_full_name(ipar), intsize); - - if (ointsize != intsize) - return -EINVAL; -@@ -269,29 +269,29 @@ int of_irq_map_raw(struct device_node *p - - return -EINVAL; - } --EXPORT_SYMBOL_GPL(of_irq_map_raw); -+EXPORT_SYMBOL_GPL(of_irq_parse_raw); - - /** -- * of_irq_map_one - Resolve an interrupt for a device -+ * of_irq_parse_one - Resolve an interrupt for a device - * @device: the device whose interrupt is to be resolved - * @index: index of the interrupt to resolve - * @out_irq: structure of_irq filled by this function - * - * This function resolves an interrupt, walking the tree, for a given -- * device-tree node. It's the high level pendant to of_irq_map_raw(). -+ * device-tree node. It's the high level pendant to of_irq_parse_raw(). - */ --int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq) -+int of_irq_parse_one(struct device_node *device, int index, struct of_irq *out_irq) - { - struct device_node *p; - const __be32 *intspec, *tmp, *addr; - u32 intsize, intlen; - int res = -EINVAL; - -- pr_debug("of_irq_map_one: dev=%s, index=%d\n", of_node_full_name(device), index); -+ pr_debug("of_irq_parse_one: dev=%s, index=%d\n", of_node_full_name(device), index); - - /* OldWorld mac stuff is "special", handle out of line */ - if (of_irq_workarounds & OF_IMAP_OLDWORLD_MAC) -- return of_irq_map_oldworld(device, index, out_irq); -+ return of_irq_parse_oldworld(device, index, out_irq); - - /* Get the reg property (if any) */ - addr = of_get_property(device, "reg", NULL); -@@ -328,13 +328,13 @@ int of_irq_map_one(struct device_node *d - goto out; - - /* Get new specifier and map it */ -- res = of_irq_map_raw(p, intspec + index * intsize, intsize, -+ res = of_irq_parse_raw(p, intspec + index * intsize, intsize, - addr, out_irq); - out: - of_node_put(p); - return res; - } --EXPORT_SYMBOL_GPL(of_irq_map_one); -+EXPORT_SYMBOL_GPL(of_irq_parse_one); - - /** - * of_irq_to_resource - Decode a node's IRQ and return it as a resource ---- a/drivers/of/of_pci_irq.c -+++ b/drivers/of/of_pci_irq.c -@@ -5,7 +5,7 @@ - #include - - /** -- * of_irq_map_pci - Resolve the interrupt for a PCI device -+ * of_irq_parse_pci - Resolve the interrupt for a PCI device - * @pdev: the device whose interrupt is to be resolved - * @out_irq: structure of_irq filled by this function - * -@@ -15,7 +15,7 @@ - * PCI tree until an device-node is found, at which point it will finish - * resolving using the OF tree walking. - */ --int of_irq_map_pci(const struct pci_dev *pdev, struct of_irq *out_irq) -+int of_irq_parse_pci(const struct pci_dev *pdev, struct of_irq *out_irq) - { - struct device_node *dn, *ppnode; - struct pci_dev *ppdev; -@@ -30,7 +30,7 @@ int of_irq_map_pci(const struct pci_dev - */ - dn = pci_device_to_OF_node(pdev); - if (dn) { -- rc = of_irq_map_one(dn, 0, out_irq); -+ rc = of_irq_parse_one(dn, 0, out_irq); - if (!rc) - return rc; - } -@@ -88,6 +88,6 @@ int of_irq_map_pci(const struct pci_dev - lspec_be = cpu_to_be32(lspec); - laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8)); - laddr[1] = laddr[2] = cpu_to_be32(0); -- return of_irq_map_raw(ppnode, &lspec_be, 1, laddr, out_irq); -+ return of_irq_parse_raw(ppnode, &lspec_be, 1, laddr, out_irq); - } --EXPORT_SYMBOL_GPL(of_irq_map_pci); -+EXPORT_SYMBOL_GPL(of_irq_parse_pci); ---- a/drivers/pci/host/pci-mvebu.c -+++ b/drivers/pci/host/pci-mvebu.c -@@ -652,7 +652,7 @@ static int __init mvebu_pcie_map_irq(con - struct of_irq oirq; - int ret; - -- ret = of_irq_map_pci(dev, &oirq); -+ ret = of_irq_parse_pci(dev, &oirq); - if (ret) - return ret; - ---- a/include/linux/of_irq.h -+++ b/include/linux/of_irq.h -@@ -35,12 +35,12 @@ typedef int (*of_irq_init_cb_t)(struct d - #if defined(CONFIG_PPC32) && defined(CONFIG_PPC_PMAC) - extern unsigned int of_irq_workarounds; - extern struct device_node *of_irq_dflt_pic; --extern int of_irq_map_oldworld(struct device_node *device, int index, -+extern int of_irq_parse_oldworld(struct device_node *device, int index, - struct of_irq *out_irq); - #else /* CONFIG_PPC32 && CONFIG_PPC_PMAC */ - #define of_irq_workarounds (0) - #define of_irq_dflt_pic (NULL) --static inline int of_irq_map_oldworld(struct device_node *device, int index, -+static inline int of_irq_parse_oldworld(struct device_node *device, int index, - struct of_irq *out_irq) - { - return -EINVAL; -@@ -48,10 +48,10 @@ static inline int of_irq_map_oldworld(st - #endif /* CONFIG_PPC32 && CONFIG_PPC_PMAC */ - - --extern int of_irq_map_raw(struct device_node *parent, const __be32 *intspec, -+extern int of_irq_parse_raw(struct device_node *parent, const __be32 *intspec, - u32 ointsize, const __be32 *addr, - struct of_irq *out_irq); --extern int of_irq_map_one(struct device_node *device, int index, -+extern int of_irq_parse_one(struct device_node *device, int index, - struct of_irq *out_irq); - extern unsigned int irq_create_of_mapping(struct device_node *controller, - const u32 *intspec, ---- a/include/linux/of_pci.h -+++ b/include/linux/of_pci.h -@@ -6,7 +6,7 @@ - - struct pci_dev; - struct of_irq; --int of_irq_map_pci(const struct pci_dev *pdev, struct of_irq *out_irq); -+int of_irq_parse_pci(const struct pci_dev *pdev, struct of_irq *out_irq); - - struct device_node; - struct device_node *of_pci_find_child_device(struct device_node *parent, diff --git a/target/linux/mvebu/patches-3.10/0184-of-irq-Replace-of_irq-with-of_phandle_args.patch b/target/linux/mvebu/patches-3.10/0184-of-irq-Replace-of_irq-with-of_phandle_args.patch deleted file mode 100644 index f22da5fa90..0000000000 --- a/target/linux/mvebu/patches-3.10/0184-of-irq-Replace-of_irq-with-of_phandle_args.patch +++ /dev/null @@ -1,486 +0,0 @@ -From 1baf727ee1d863a0eacd249cff6afc99022593c2 Mon Sep 17 00:00:00 2001 -From: Grant Likely -Date: Thu, 19 Dec 2013 09:30:55 -0300 -Subject: [PATCH 184/203] of/irq: Replace of_irq with of_phandle_args - -struct of_irq and struct of_phandle_args are exactly the same structure. -This patch makes the kernel use of_phandle_args everywhere. This in -itself isn't a big deal, but it makes some follow-on patches simpler. - -Signed-off-by: Grant Likely -Acked-by: Michal Simek -Acked-by: Tony Lindgren -Cc: Russell King -Cc: Ralf Baechle -Cc: Benjamin Herrenschmidt - -Conflicts: - arch/mips/pci/pci-rt3883.c ---- - arch/arm/mach-integrator/pci_v3.c | 5 ++--- - arch/microblaze/pci/pci-common.c | 9 ++++----- - arch/mips/pci/fixup-lantiq.c | 5 ++--- - arch/powerpc/kernel/pci-common.c | 9 ++++----- - arch/powerpc/platforms/cell/celleb_scc_pciex.c | 5 ++--- - arch/powerpc/platforms/cell/celleb_scc_sio.c | 5 ++--- - arch/powerpc/platforms/cell/spider-pic.c | 6 +++--- - arch/powerpc/platforms/cell/spu_manage.c | 12 ++++++------ - arch/powerpc/platforms/fsl_uli1575.c | 8 +++----- - arch/powerpc/platforms/powermac/pic.c | 8 ++++---- - arch/powerpc/platforms/pseries/event_sources.c | 7 +++---- - arch/powerpc/sysdev/mpic_msi.c | 6 +++--- - arch/x86/kernel/devicetree.c | 5 ++--- - drivers/of/irq.c | 15 +++++++-------- - drivers/of/of_pci_irq.c | 2 +- - drivers/pci/host/pci-mvebu.c | 5 ++--- - include/linux/of_irq.h | 24 ++++-------------------- - include/linux/of_pci.h | 4 ++-- - 18 files changed, 56 insertions(+), 84 deletions(-) - ---- a/arch/arm/mach-integrator/pci_v3.c -+++ b/arch/arm/mach-integrator/pci_v3.c -@@ -684,7 +684,7 @@ static struct hw_pci pci_v3 __initdata = - - static int __init pci_v3_map_irq_dt(const struct pci_dev *dev, u8 slot, u8 pin) - { -- struct of_irq oirq; -+ struct of_phandle_args oirq; - int ret; - - ret = of_irq_parse_pci(dev, &oirq); -@@ -694,8 +694,7 @@ static int __init pci_v3_map_irq_dt(cons - return 0; - } - -- return irq_create_of_mapping(oirq.controller, oirq.specifier, -- oirq.size); -+ return irq_create_of_mapping(oirq.np, oirq.args, oirq.args_count); - } - - static int __init pci_v3_dtprobe(struct platform_device *pdev, ---- a/arch/microblaze/pci/pci-common.c -+++ b/arch/microblaze/pci/pci-common.c -@@ -199,7 +199,7 @@ void pcibios_set_master(struct pci_dev * - */ - int pci_read_irq_line(struct pci_dev *pci_dev) - { -- struct of_irq oirq; -+ struct of_phandle_args oirq; - unsigned int virq; - - /* The current device-tree that iSeries generates from the HV -@@ -243,11 +243,10 @@ int pci_read_irq_line(struct pci_dev *pc - irq_set_irq_type(virq, IRQ_TYPE_LEVEL_LOW); - } else { - pr_debug(" Got one, spec %d cells (0x%08x 0x%08x...) on %s\n", -- oirq.size, oirq.specifier[0], oirq.specifier[1], -- of_node_full_name(oirq.controller)); -+ oirq.args_count, oirq.args[0], oirq.args[1], -+ of_node_full_name(oirq.np)); - -- virq = irq_create_of_mapping(oirq.controller, oirq.specifier, -- oirq.size); -+ virq = irq_create_of_mapping(oirq.np, oirq.args, oirq.args_count); - } - if (!virq) { - pr_debug(" Failed to map !\n"); ---- a/arch/mips/pci/fixup-lantiq.c -+++ b/arch/mips/pci/fixup-lantiq.c -@@ -25,7 +25,7 @@ int pcibios_plat_dev_init(struct pci_dev - - int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) - { -- struct of_irq dev_irq; -+ struct of_phandle_args dev_irq; - int irq; - - if (of_irq_parse_pci(dev, &dev_irq)) { -@@ -33,8 +33,7 @@ int __init pcibios_map_irq(const struct - slot, pin); - return 0; - } -- irq = irq_create_of_mapping(dev_irq.controller, dev_irq.specifier, -- dev_irq.size); -+ irq = irq_create_of_mapping(dev_irq.np, dev_irq.args, dev_irq.args_count); - dev_info(&dev->dev, "SLOT:%d PIN:%d IRQ:%d\n", slot, pin, irq); - return irq; - } ---- a/arch/powerpc/kernel/pci-common.c -+++ b/arch/powerpc/kernel/pci-common.c -@@ -228,7 +228,7 @@ int pcibios_add_platform_entries(struct - */ - static int pci_read_irq_line(struct pci_dev *pci_dev) - { -- struct of_irq oirq; -+ struct of_phandle_args oirq; - unsigned int virq; - - pr_debug("PCI: Try to map irq for %s...\n", pci_name(pci_dev)); -@@ -263,11 +263,10 @@ static int pci_read_irq_line(struct pci_ - irq_set_irq_type(virq, IRQ_TYPE_LEVEL_LOW); - } else { - pr_debug(" Got one, spec %d cells (0x%08x 0x%08x...) on %s\n", -- oirq.size, oirq.specifier[0], oirq.specifier[1], -- of_node_full_name(oirq.controller)); -+ oirq.args_count, oirq.args[0], oirq.args[1], -+ of_node_full_name(oirq.np)); - -- virq = irq_create_of_mapping(oirq.controller, oirq.specifier, -- oirq.size); -+ virq = irq_create_of_mapping(oirq.np, oirq.args, oirq.args_count); - } - if(virq == NO_IRQ) { - pr_debug(" Failed to map !\n"); ---- a/arch/powerpc/platforms/cell/celleb_scc_pciex.c -+++ b/arch/powerpc/platforms/cell/celleb_scc_pciex.c -@@ -486,7 +486,7 @@ static __init int celleb_setup_pciex(str - struct pci_controller *phb) - { - struct resource r; -- struct of_irq oirq; -+ struct of_phandle_args oirq; - int virq; - - /* SMMIO registers; used inside this file */ -@@ -511,8 +511,7 @@ static __init int celleb_setup_pciex(str - pr_err("PCIEXC:Failed to map irq\n"); - goto error; - } -- virq = irq_create_of_mapping(oirq.controller, oirq.specifier, -- oirq.size); -+ virq = irq_create_of_mapping(oirq.np, oirq.args, oirq.args_count); - if (request_irq(virq, pciex_handle_internal_irq, - 0, "pciex", (void *)phb)) { - pr_err("PCIEXC:Failed to request irq\n"); ---- a/arch/powerpc/platforms/cell/celleb_scc_sio.c -+++ b/arch/powerpc/platforms/cell/celleb_scc_sio.c -@@ -45,7 +45,7 @@ static int __init txx9_serial_init(void) - struct device_node *node; - int i; - struct uart_port req; -- struct of_irq irq; -+ struct of_phandle_args irq; - struct resource res; - - for_each_compatible_node(node, "serial", "toshiba,sio-scc") { -@@ -66,8 +66,7 @@ static int __init txx9_serial_init(void) - #ifdef CONFIG_SERIAL_TXX9_CONSOLE - req.membase = ioremap(req.mapbase, 0x24); - #endif -- req.irq = irq_create_of_mapping(irq.controller, -- irq.specifier, irq.size); -+ req.irq = irq_create_of_mapping(irq.np, irq.args, irq.args_count); - req.flags |= UPF_IOREMAP | UPF_BUGGY_UART - /*HAVE_CTS_LINE*/; - req.uartclk = 83300000; ---- a/arch/powerpc/platforms/cell/spider-pic.c -+++ b/arch/powerpc/platforms/cell/spider-pic.c -@@ -235,10 +235,10 @@ static unsigned int __init spider_find_c - /* First, we check whether we have a real "interrupts" in the device - * tree in case the device-tree is ever fixed - */ -- struct of_irq oirq; -+ struct of_phandle_args oirq; - if (of_irq_parse_one(pic->host->of_node, 0, &oirq) == 0) { -- virq = irq_create_of_mapping(oirq.controller, oirq.specifier, -- oirq.size); -+ virq = irq_create_of_mapping(oirq.np, oirq.args, -+ oirq.args_count); - return virq; - } - ---- a/arch/powerpc/platforms/cell/spu_manage.c -+++ b/arch/powerpc/platforms/cell/spu_manage.c -@@ -177,7 +177,7 @@ out: - - static int __init spu_map_interrupts(struct spu *spu, struct device_node *np) - { -- struct of_irq oirq; -+ struct of_phandle_args oirq; - int ret; - int i; - -@@ -188,10 +188,10 @@ static int __init spu_map_interrupts(str - goto err; - } - ret = -EINVAL; -- pr_debug(" irq %d no 0x%x on %s\n", i, oirq.specifier[0], -- oirq.controller->full_name); -- spu->irqs[i] = irq_create_of_mapping(oirq.controller, -- oirq.specifier, oirq.size); -+ pr_debug(" irq %d no 0x%x on %s\n", i, oirq.args[0], -+ oirq.np->full_name); -+ spu->irqs[i] = irq_create_of_mapping(oirq.np, -+ oirq.args, oirq.args_count); - if (spu->irqs[i] == NO_IRQ) { - pr_debug("spu_new: failed to map it !\n"); - goto err; -@@ -200,7 +200,7 @@ static int __init spu_map_interrupts(str - return 0; - - err: -- pr_debug("failed to map irq %x for spu %s\n", *oirq.specifier, -+ pr_debug("failed to map irq %x for spu %s\n", *oirq.args, - spu->name); - for (; i >= 0; i--) { - if (spu->irqs[i] != NO_IRQ) ---- a/arch/powerpc/platforms/fsl_uli1575.c -+++ b/arch/powerpc/platforms/fsl_uli1575.c -@@ -321,8 +321,8 @@ static void hpcd_final_uli5288(struct pc - { - struct pci_controller *hose = pci_bus_to_host(dev->bus); - struct device_node *hosenode = hose ? hose->dn : NULL; -- struct of_irq oirq; -- int virq, pin = 2; -+ struct of_phandle_args oirq; -+ int pin = 2; - u32 laddr[3]; - - if (!machine_is(mpc86xx_hpcd)) -@@ -334,9 +334,7 @@ static void hpcd_final_uli5288(struct pc - laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(31, 0) << 8); - laddr[1] = laddr[2] = 0; - of_irq_parse_raw(hosenode, &pin, 1, laddr, &oirq); -- virq = irq_create_of_mapping(oirq.controller, oirq.specifier, -- oirq.size); -- dev->irq = virq; -+ dev->irq = irq_create_of_mapping(oirq.np, oirq.args, oirq.args_count); - } - - DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, hpcd_quirk_uli1575); ---- a/arch/powerpc/platforms/powermac/pic.c -+++ b/arch/powerpc/platforms/powermac/pic.c -@@ -394,7 +394,7 @@ static void __init pmac_pic_probe_oldsty - } - - int of_irq_parse_oldworld(struct device_node *device, int index, -- struct of_irq *out_irq) -+ struct of_phandle_args *out_irq) - { - const u32 *ints = NULL; - int intlen; -@@ -422,9 +422,9 @@ int of_irq_parse_oldworld(struct device_ - if (index >= intlen) - return -EINVAL; - -- out_irq->controller = NULL; -- out_irq->specifier[0] = ints[index]; -- out_irq->size = 1; -+ out_irq->np = NULL; -+ out_irq->args[0] = ints[index]; -+ out_irq->args_count = 1; - - return 0; - } ---- a/arch/powerpc/platforms/pseries/event_sources.c -+++ b/arch/powerpc/platforms/pseries/event_sources.c -@@ -25,7 +25,7 @@ void request_event_sources_irqs(struct d - const char *name) - { - int i, index, count = 0; -- struct of_irq oirq; -+ struct of_phandle_args oirq; - const u32 *opicprop; - unsigned int opicplen; - unsigned int virqs[16]; -@@ -59,9 +59,8 @@ void request_event_sources_irqs(struct d - index++) { - if (count > 15) - break; -- virqs[count] = irq_create_of_mapping(oirq.controller, -- oirq.specifier, -- oirq.size); -+ virqs[count] = irq_create_of_mapping(oirq.np, oirq.args, -+ oirq.args_count); - if (virqs[count] == NO_IRQ) { - pr_err("event-sources: Unable to allocate " - "interrupt number for %s\n", ---- a/arch/powerpc/sysdev/mpic_msi.c -+++ b/arch/powerpc/sysdev/mpic_msi.c -@@ -35,7 +35,7 @@ static int mpic_msi_reserve_u3_hwirqs(st - const struct irq_domain_ops *ops = mpic->irqhost->ops; - struct device_node *np; - int flags, index, i; -- struct of_irq oirq; -+ struct of_phandle_args oirq; - - pr_debug("mpic: found U3, guessing msi allocator setup\n"); - -@@ -64,8 +64,8 @@ static int mpic_msi_reserve_u3_hwirqs(st - - index = 0; - while (of_irq_parse_one(np, index++, &oirq) == 0) { -- ops->xlate(mpic->irqhost, NULL, oirq.specifier, -- oirq.size, &hwirq, &flags); -+ ops->xlate(mpic->irqhost, NULL, oirq.args, -+ oirq.args_count, &hwirq, &flags); - msi_bitmap_reserve_hwirq(&mpic->msi_bitmap, hwirq); - } - } ---- a/arch/x86/kernel/devicetree.c -+++ b/arch/x86/kernel/devicetree.c -@@ -106,7 +106,7 @@ struct device_node *pcibios_get_phb_of_n - - static int x86_of_pci_irq_enable(struct pci_dev *dev) - { -- struct of_irq oirq; -+ struct of_phandle_args oirq; - u32 virq; - int ret; - u8 pin; -@@ -121,8 +121,7 @@ static int x86_of_pci_irq_enable(struct - if (ret) - return ret; - -- virq = irq_create_of_mapping(oirq.controller, oirq.specifier, -- oirq.size); -+ virq = irq_create_of_mapping(oirq.np, oirq.args, oirq.args_count); - if (virq == 0) - return -EINVAL; - dev->irq = virq; ---- a/drivers/of/irq.c -+++ b/drivers/of/irq.c -@@ -36,13 +36,12 @@ - */ - unsigned int irq_of_parse_and_map(struct device_node *dev, int index) - { -- struct of_irq oirq; -+ struct of_phandle_args oirq; - - if (of_irq_parse_one(dev, index, &oirq)) - return 0; - -- return irq_create_of_mapping(oirq.controller, oirq.specifier, -- oirq.size); -+ return irq_create_of_mapping(oirq.np, oirq.args, oirq.args_count); - } - EXPORT_SYMBOL_GPL(irq_of_parse_and_map); - -@@ -94,7 +93,7 @@ struct device_node *of_irq_find_parent(s - * node exist for the parent. - */ - int of_irq_parse_raw(struct device_node *parent, const __be32 *intspec, -- u32 ointsize, const __be32 *addr, struct of_irq *out_irq) -+ u32 ointsize, const __be32 *addr, struct of_phandle_args *out_irq) - { - struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL; - const __be32 *tmp, *imap, *imask; -@@ -156,10 +155,10 @@ int of_irq_parse_raw(struct device_node - NULL) { - pr_debug(" -> got it !\n"); - for (i = 0; i < intsize; i++) -- out_irq->specifier[i] = -+ out_irq->args[i] = - of_read_number(intspec +i, 1); -- out_irq->size = intsize; -- out_irq->controller = ipar; -+ out_irq->args_count = intsize; -+ out_irq->np = ipar; - of_node_put(old); - return 0; - } -@@ -280,7 +279,7 @@ EXPORT_SYMBOL_GPL(of_irq_parse_raw); - * This function resolves an interrupt, walking the tree, for a given - * device-tree node. It's the high level pendant to of_irq_parse_raw(). - */ --int of_irq_parse_one(struct device_node *device, int index, struct of_irq *out_irq) -+int of_irq_parse_one(struct device_node *device, int index, struct of_phandle_args *out_irq) - { - struct device_node *p; - const __be32 *intspec, *tmp, *addr; ---- a/drivers/of/of_pci_irq.c -+++ b/drivers/of/of_pci_irq.c -@@ -15,7 +15,7 @@ - * PCI tree until an device-node is found, at which point it will finish - * resolving using the OF tree walking. - */ --int of_irq_parse_pci(const struct pci_dev *pdev, struct of_irq *out_irq) -+int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq) - { - struct device_node *dn, *ppnode; - struct pci_dev *ppdev; ---- a/drivers/pci/host/pci-mvebu.c -+++ b/drivers/pci/host/pci-mvebu.c -@@ -649,15 +649,14 @@ static int __init mvebu_pcie_setup(int n - - static int __init mvebu_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) - { -- struct of_irq oirq; -+ struct of_phandle_args oirq; - int ret; - - ret = of_irq_parse_pci(dev, &oirq); - if (ret) - return ret; - -- return irq_create_of_mapping(oirq.controller, oirq.specifier, -- oirq.size); -+ return irq_create_of_mapping(oirq.np, oirq.args, oirq.args_count); - } - - static struct pci_bus *mvebu_pcie_scan_bus(int nr, struct pci_sys_data *sys) ---- a/include/linux/of_irq.h -+++ b/include/linux/of_irq.h -@@ -8,22 +8,6 @@ - #include - #include - --/** -- * of_irq - container for device_node/irq_specifier pair for an irq controller -- * @controller: pointer to interrupt controller device tree node -- * @size: size of interrupt specifier -- * @specifier: array of cells @size long specifing the specific interrupt -- * -- * This structure is returned when an interrupt is mapped. The controller -- * field needs to be put() after use -- */ --#define OF_MAX_IRQ_SPEC 4 /* We handle specifiers of at most 4 cells */ --struct of_irq { -- struct device_node *controller; /* Interrupt controller node */ -- u32 size; /* Specifier size */ -- u32 specifier[OF_MAX_IRQ_SPEC]; /* Specifier copy */ --}; -- - typedef int (*of_irq_init_cb_t)(struct device_node *, struct device_node *); - - /* -@@ -36,12 +20,12 @@ typedef int (*of_irq_init_cb_t)(struct d - extern unsigned int of_irq_workarounds; - extern struct device_node *of_irq_dflt_pic; - extern int of_irq_parse_oldworld(struct device_node *device, int index, -- struct of_irq *out_irq); -+ struct of_phandle_args *out_irq); - #else /* CONFIG_PPC32 && CONFIG_PPC_PMAC */ - #define of_irq_workarounds (0) - #define of_irq_dflt_pic (NULL) - static inline int of_irq_parse_oldworld(struct device_node *device, int index, -- struct of_irq *out_irq) -+ struct of_phandle_args *out_irq) - { - return -EINVAL; - } -@@ -50,9 +34,9 @@ static inline int of_irq_parse_oldworld( - - extern int of_irq_parse_raw(struct device_node *parent, const __be32 *intspec, - u32 ointsize, const __be32 *addr, -- struct of_irq *out_irq); -+ struct of_phandle_args *out_irq); - extern int of_irq_parse_one(struct device_node *device, int index, -- struct of_irq *out_irq); -+ struct of_phandle_args *out_irq); - extern unsigned int irq_create_of_mapping(struct device_node *controller, - const u32 *intspec, - unsigned int intsize); ---- a/include/linux/of_pci.h -+++ b/include/linux/of_pci.h -@@ -5,8 +5,8 @@ - #include - - struct pci_dev; --struct of_irq; --int of_irq_parse_pci(const struct pci_dev *pdev, struct of_irq *out_irq); -+struct of_phandle_args; -+int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq); - - struct device_node; - struct device_node *of_pci_find_child_device(struct device_node *parent, diff --git a/target/linux/mvebu/patches-3.10/0185-of-irq-simplify-args-to-irq_create_of_mapping.patch b/target/linux/mvebu/patches-3.10/0185-of-irq-simplify-args-to-irq_create_of_mapping.patch deleted file mode 100644 index 2de7e7b674..0000000000 --- a/target/linux/mvebu/patches-3.10/0185-of-irq-simplify-args-to-irq_create_of_mapping.patch +++ /dev/null @@ -1,245 +0,0 @@ -From 5e69ff59f7e51ddfde0b31587beb9e40ea1c85bc Mon Sep 17 00:00:00 2001 -From: Grant Likely -Date: Thu, 19 Dec 2013 09:30:56 -0300 -Subject: [PATCH 185/203] of/irq: simplify args to irq_create_of_mapping - -All the callers of irq_create_of_mapping() pass the contents of a struct -of_phandle_args structure to the function. Since all the callers already -have an of_phandle_args pointer, why not pass it directly to -irq_create_of_mapping()? - -Signed-off-by: Grant Likely -Acked-by: Michal Simek -Acked-by: Tony Lindgren -Cc: Thomas Gleixner -Cc: Russell King -Cc: Ralf Baechle -Cc: Benjamin Herrenschmidt - -Conflicts: - arch/mips/pci/pci-rt3883.c - kernel/irq/irqdomain.c ---- - arch/arm/mach-integrator/pci_v3.c | 2 +- - arch/microblaze/pci/pci-common.c | 2 +- - arch/mips/pci/fixup-lantiq.c | 2 +- - arch/powerpc/kernel/pci-common.c | 2 +- - arch/powerpc/platforms/cell/celleb_scc_pciex.c | 2 +- - arch/powerpc/platforms/cell/celleb_scc_sio.c | 2 +- - arch/powerpc/platforms/cell/spider-pic.c | 7 ++----- - arch/powerpc/platforms/cell/spu_manage.c | 3 +-- - arch/powerpc/platforms/fsl_uli1575.c | 2 +- - arch/powerpc/platforms/pseries/event_sources.c | 3 +-- - arch/x86/kernel/devicetree.c | 2 +- - drivers/of/irq.c | 2 +- - drivers/pci/host/pci-mvebu.c | 2 +- - include/linux/of_irq.h | 4 +--- - kernel/irq/irqdomain.c | 15 +++++++-------- - 15 files changed, 22 insertions(+), 30 deletions(-) - ---- a/arch/arm/mach-integrator/pci_v3.c -+++ b/arch/arm/mach-integrator/pci_v3.c -@@ -694,7 +694,7 @@ static int __init pci_v3_map_irq_dt(cons - return 0; - } - -- return irq_create_of_mapping(oirq.np, oirq.args, oirq.args_count); -+ return irq_create_of_mapping(&oirq); - } - - static int __init pci_v3_dtprobe(struct platform_device *pdev, ---- a/arch/microblaze/pci/pci-common.c -+++ b/arch/microblaze/pci/pci-common.c -@@ -246,7 +246,7 @@ int pci_read_irq_line(struct pci_dev *pc - oirq.args_count, oirq.args[0], oirq.args[1], - of_node_full_name(oirq.np)); - -- virq = irq_create_of_mapping(oirq.np, oirq.args, oirq.args_count); -+ virq = irq_create_of_mapping(&oirq); - } - if (!virq) { - pr_debug(" Failed to map !\n"); ---- a/arch/mips/pci/fixup-lantiq.c -+++ b/arch/mips/pci/fixup-lantiq.c -@@ -33,7 +33,7 @@ int __init pcibios_map_irq(const struct - slot, pin); - return 0; - } -- irq = irq_create_of_mapping(dev_irq.np, dev_irq.args, dev_irq.args_count); -+ irq = irq_create_of_mapping(&dev_irq); - dev_info(&dev->dev, "SLOT:%d PIN:%d IRQ:%d\n", slot, pin, irq); - return irq; - } ---- a/arch/powerpc/kernel/pci-common.c -+++ b/arch/powerpc/kernel/pci-common.c -@@ -266,7 +266,7 @@ static int pci_read_irq_line(struct pci_ - oirq.args_count, oirq.args[0], oirq.args[1], - of_node_full_name(oirq.np)); - -- virq = irq_create_of_mapping(oirq.np, oirq.args, oirq.args_count); -+ virq = irq_create_of_mapping(&oirq); - } - if(virq == NO_IRQ) { - pr_debug(" Failed to map !\n"); ---- a/arch/powerpc/platforms/cell/celleb_scc_pciex.c -+++ b/arch/powerpc/platforms/cell/celleb_scc_pciex.c -@@ -511,7 +511,7 @@ static __init int celleb_setup_pciex(str - pr_err("PCIEXC:Failed to map irq\n"); - goto error; - } -- virq = irq_create_of_mapping(oirq.np, oirq.args, oirq.args_count); -+ virq = irq_create_of_mapping(&oirq); - if (request_irq(virq, pciex_handle_internal_irq, - 0, "pciex", (void *)phb)) { - pr_err("PCIEXC:Failed to request irq\n"); ---- a/arch/powerpc/platforms/cell/celleb_scc_sio.c -+++ b/arch/powerpc/platforms/cell/celleb_scc_sio.c -@@ -66,7 +66,7 @@ static int __init txx9_serial_init(void) - #ifdef CONFIG_SERIAL_TXX9_CONSOLE - req.membase = ioremap(req.mapbase, 0x24); - #endif -- req.irq = irq_create_of_mapping(irq.np, irq.args, irq.args_count); -+ req.irq = irq_create_of_mapping(&irq); - req.flags |= UPF_IOREMAP | UPF_BUGGY_UART - /*HAVE_CTS_LINE*/; - req.uartclk = 83300000; ---- a/arch/powerpc/platforms/cell/spider-pic.c -+++ b/arch/powerpc/platforms/cell/spider-pic.c -@@ -236,11 +236,8 @@ static unsigned int __init spider_find_c - * tree in case the device-tree is ever fixed - */ - struct of_phandle_args oirq; -- if (of_irq_parse_one(pic->host->of_node, 0, &oirq) == 0) { -- virq = irq_create_of_mapping(oirq.np, oirq.args, -- oirq.args_count); -- return virq; -- } -+ if (of_irq_parse_one(pic->host->of_node, 0, &oirq) == 0) -+ return irq_create_of_mapping(&oirq); - - /* Now do the horrible hacks */ - tmp = of_get_property(pic->host->of_node, "#interrupt-cells", NULL); ---- a/arch/powerpc/platforms/cell/spu_manage.c -+++ b/arch/powerpc/platforms/cell/spu_manage.c -@@ -190,8 +190,7 @@ static int __init spu_map_interrupts(str - ret = -EINVAL; - pr_debug(" irq %d no 0x%x on %s\n", i, oirq.args[0], - oirq.np->full_name); -- spu->irqs[i] = irq_create_of_mapping(oirq.np, -- oirq.args, oirq.args_count); -+ spu->irqs[i] = irq_create_of_mapping(&oirq); - if (spu->irqs[i] == NO_IRQ) { - pr_debug("spu_new: failed to map it !\n"); - goto err; ---- a/arch/powerpc/platforms/fsl_uli1575.c -+++ b/arch/powerpc/platforms/fsl_uli1575.c -@@ -334,7 +334,7 @@ static void hpcd_final_uli5288(struct pc - laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(31, 0) << 8); - laddr[1] = laddr[2] = 0; - of_irq_parse_raw(hosenode, &pin, 1, laddr, &oirq); -- dev->irq = irq_create_of_mapping(oirq.np, oirq.args, oirq.args_count); -+ dev->irq = irq_create_of_mapping(&oirq); - } - - DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, hpcd_quirk_uli1575); ---- a/arch/powerpc/platforms/pseries/event_sources.c -+++ b/arch/powerpc/platforms/pseries/event_sources.c -@@ -59,8 +59,7 @@ void request_event_sources_irqs(struct d - index++) { - if (count > 15) - break; -- virqs[count] = irq_create_of_mapping(oirq.np, oirq.args, -- oirq.args_count); -+ virqs[count] = irq_create_of_mapping(&oirq); - if (virqs[count] == NO_IRQ) { - pr_err("event-sources: Unable to allocate " - "interrupt number for %s\n", ---- a/arch/x86/kernel/devicetree.c -+++ b/arch/x86/kernel/devicetree.c -@@ -121,7 +121,7 @@ static int x86_of_pci_irq_enable(struct - if (ret) - return ret; - -- virq = irq_create_of_mapping(oirq.np, oirq.args, oirq.args_count); -+ virq = irq_create_of_mapping(&oirq); - if (virq == 0) - return -EINVAL; - dev->irq = virq; ---- a/drivers/of/irq.c -+++ b/drivers/of/irq.c -@@ -41,7 +41,7 @@ unsigned int irq_of_parse_and_map(struct - if (of_irq_parse_one(dev, index, &oirq)) - return 0; - -- return irq_create_of_mapping(oirq.np, oirq.args, oirq.args_count); -+ return irq_create_of_mapping(&oirq); - } - EXPORT_SYMBOL_GPL(irq_of_parse_and_map); - ---- a/drivers/pci/host/pci-mvebu.c -+++ b/drivers/pci/host/pci-mvebu.c -@@ -656,7 +656,7 @@ static int __init mvebu_pcie_map_irq(con - if (ret) - return ret; - -- return irq_create_of_mapping(oirq.np, oirq.args, oirq.args_count); -+ return irq_create_of_mapping(&oirq); - } - - static struct pci_bus *mvebu_pcie_scan_bus(int nr, struct pci_sys_data *sys) ---- a/include/linux/of_irq.h -+++ b/include/linux/of_irq.h -@@ -37,9 +37,7 @@ extern int of_irq_parse_raw(struct devic - struct of_phandle_args *out_irq); - extern int of_irq_parse_one(struct device_node *device, int index, - struct of_phandle_args *out_irq); --extern unsigned int irq_create_of_mapping(struct device_node *controller, -- const u32 *intspec, -- unsigned int intsize); -+extern unsigned int irq_create_of_mapping(struct of_phandle_args *irq_data); - extern int of_irq_to_resource(struct device_node *dev, int index, - struct resource *r); - extern int of_irq_count(struct device_node *dev); ---- a/kernel/irq/irqdomain.c -+++ b/kernel/irq/irqdomain.c -@@ -655,15 +655,14 @@ int irq_create_strict_mappings(struct ir - } - EXPORT_SYMBOL_GPL(irq_create_strict_mappings); - --unsigned int irq_create_of_mapping(struct device_node *controller, -- const u32 *intspec, unsigned int intsize) -+unsigned int irq_create_of_mapping(struct of_phandle_args *irq_data) - { - struct irq_domain *domain; - irq_hw_number_t hwirq; - unsigned int type = IRQ_TYPE_NONE; - unsigned int virq; - -- domain = controller ? irq_find_host(controller) : irq_default_domain; -+ domain = irq_data->np ? irq_find_host(irq_data->np) : irq_default_domain; - if (!domain) { - #ifdef CONFIG_MIPS - /* -@@ -677,17 +676,17 @@ unsigned int irq_create_of_mapping(struc - if (intsize > 0) - return intspec[0]; - #endif -- pr_warning("no irq domain found for %s !\n", -- of_node_full_name(controller)); -+ pr_warn("no irq domain found for %s !\n", -+ of_node_full_name(irq_data->np)); - return 0; - } - - /* If domain has no translation, then we assume interrupt line */ - if (domain->ops->xlate == NULL) -- hwirq = intspec[0]; -+ hwirq = irq_data->args[0]; - else { -- if (domain->ops->xlate(domain, controller, intspec, intsize, -- &hwirq, &type)) -+ if (domain->ops->xlate(domain, irq_data->np, irq_data->args, -+ irq_data->args_count, &hwirq, &type)) - return 0; - } - diff --git a/target/linux/mvebu/patches-3.10/0186-of-irq-Refactor-interrupt-map-parsing.patch b/target/linux/mvebu/patches-3.10/0186-of-irq-Refactor-interrupt-map-parsing.patch deleted file mode 100644 index 7f17bb737b..0000000000 --- a/target/linux/mvebu/patches-3.10/0186-of-irq-Refactor-interrupt-map-parsing.patch +++ /dev/null @@ -1,287 +0,0 @@ -From 44ad702902e9e274f57edce8944e46540b978f9a Mon Sep 17 00:00:00 2001 -From: Grant Likely -Date: Thu, 19 Dec 2013 09:30:57 -0300 -Subject: [PATCH 186/203] of/irq: Refactor interrupt-map parsing - -All the users of of_irq_parse_raw pass in a raw interrupt specifier from -the device tree and expect it to be returned (possibly modified) in an -of_phandle_args structure. However, the primary function of -of_irq_parse_raw() is to check for translations due to the presence of -one or more interrupt-map properties. The actual placing of the data -into an of_phandle_args structure is trivial. If it is refactored to -accept an of_phandle_args structure directly, then it becomes possible -to consume of_phandle_args from other sources. This is important for an -upcoming patch that allows a device to be connected to more than one -interrupt parent. It also simplifies the code a bit. - -The biggest complication with this patch is that the old version works -on the interrupt specifiers in __be32 form, but the of_phandle_args -structure is intended to carry it in the cpu-native version. A bit of -churn was required to make this work. In the end it results in tighter -code, so the churn is worth it. - -Signed-off-by: Grant Likely -Acked-by: Tony Lindgren -Cc: Benjamin Herrenschmidt ---- - arch/powerpc/platforms/fsl_uli1575.c | 6 +- - drivers/of/irq.c | 108 ++++++++++++++++++----------------- - drivers/of/of_pci_irq.c | 7 ++- - include/linux/of_irq.h | 5 +- - 4 files changed, 67 insertions(+), 59 deletions(-) - ---- a/arch/powerpc/platforms/fsl_uli1575.c -+++ b/arch/powerpc/platforms/fsl_uli1575.c -@@ -322,7 +322,6 @@ static void hpcd_final_uli5288(struct pc - struct pci_controller *hose = pci_bus_to_host(dev->bus); - struct device_node *hosenode = hose ? hose->dn : NULL; - struct of_phandle_args oirq; -- int pin = 2; - u32 laddr[3]; - - if (!machine_is(mpc86xx_hpcd)) -@@ -331,9 +330,12 @@ static void hpcd_final_uli5288(struct pc - if (!hosenode) - return; - -+ oirq.np = hosenode; -+ oirq.args[0] = 2; -+ oirq.args_count = 1; - laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(31, 0) << 8); - laddr[1] = laddr[2] = 0; -- of_irq_parse_raw(hosenode, &pin, 1, laddr, &oirq); -+ of_irq_parse_raw(laddr, &oirq); - dev->irq = irq_create_of_mapping(&oirq); - } - ---- a/drivers/of/irq.c -+++ b/drivers/of/irq.c -@@ -80,31 +80,32 @@ struct device_node *of_irq_find_parent(s - /** - * of_irq_parse_raw - Low level interrupt tree parsing - * @parent: the device interrupt parent -- * @intspec: interrupt specifier ("interrupts" property of the device) -- * @ointsize: size of the passed in interrupt specifier -- * @addr: address specifier (start of "reg" property of the device) -- * @out_irq: structure of_irq filled by this function -+ * @addr: address specifier (start of "reg" property of the device) in be32 format -+ * @out_irq: structure of_irq updated by this function - * - * Returns 0 on success and a negative number on error - * - * This function is a low-level interrupt tree walking function. It - * can be used to do a partial walk with synthetized reg and interrupts - * properties, for example when resolving PCI interrupts when no device -- * node exist for the parent. -+ * node exist for the parent. It takes an interrupt specifier structure as -+ * input, walks the tree looking for any interrupt-map properties, translates -+ * the specifier for each map, and then returns the translated map. - */ --int of_irq_parse_raw(struct device_node *parent, const __be32 *intspec, -- u32 ointsize, const __be32 *addr, struct of_phandle_args *out_irq) -+int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq) - { - struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL; -- const __be32 *tmp, *imap, *imask; -+ __be32 initial_match_array[8]; -+ const __be32 *match_array = initial_match_array; -+ const __be32 *tmp, *imap, *imask, dummy_imask[] = { ~0, ~0, ~0, ~0, ~0 }; - u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0; - int imaplen, match, i; - - pr_debug("of_irq_parse_raw: par=%s,intspec=[0x%08x 0x%08x...],ointsize=%d\n", -- of_node_full_name(parent), be32_to_cpup(intspec), -- be32_to_cpup(intspec + 1), ointsize); -+ of_node_full_name(out_irq->np), out_irq->args[0], out_irq->args[1], -+ out_irq->args_count); - -- ipar = of_node_get(parent); -+ ipar = of_node_get(out_irq->np); - - /* First get the #interrupt-cells property of the current cursor - * that tells us how to interpret the passed-in intspec. If there -@@ -127,7 +128,7 @@ int of_irq_parse_raw(struct device_node - - pr_debug("of_irq_parse_raw: ipar=%s, size=%d\n", of_node_full_name(ipar), intsize); - -- if (ointsize != intsize) -+ if (out_irq->args_count != intsize) - return -EINVAL; - - /* Look for this #address-cells. We have to implement the old linux -@@ -146,6 +147,21 @@ int of_irq_parse_raw(struct device_node - - pr_debug(" -> addrsize=%d\n", addrsize); - -+ /* If we were passed no "reg" property and we attempt to parse -+ * an interrupt-map, then #address-cells must be 0. -+ * Fail if it's not. -+ */ -+ if (addr == NULL && addrsize != 0) { -+ pr_debug(" -> no reg passed in when needed !\n"); -+ return -EINVAL; -+ } -+ -+ /* Precalculate the match array - this simplifies match loop */ -+ for (i = 0; i < addrsize; i++) -+ initial_match_array[i] = addr[i]; -+ for (i = 0; i < intsize; i++) -+ initial_match_array[addrsize + i] = cpu_to_be32(out_irq->args[i]); -+ - /* Now start the actual "proper" walk of the interrupt tree */ - while (ipar != NULL) { - /* Now check if cursor is an interrupt-controller and if it is -@@ -154,11 +170,6 @@ int of_irq_parse_raw(struct device_node - if (of_get_property(ipar, "interrupt-controller", NULL) != - NULL) { - pr_debug(" -> got it !\n"); -- for (i = 0; i < intsize; i++) -- out_irq->args[i] = -- of_read_number(intspec +i, 1); -- out_irq->args_count = intsize; -- out_irq->np = ipar; - of_node_put(old); - return 0; - } -@@ -175,34 +186,16 @@ int of_irq_parse_raw(struct device_node - - /* Look for a mask */ - imask = of_get_property(ipar, "interrupt-map-mask", NULL); -- -- /* If we were passed no "reg" property and we attempt to parse -- * an interrupt-map, then #address-cells must be 0. -- * Fail if it's not. -- */ -- if (addr == NULL && addrsize != 0) { -- pr_debug(" -> no reg passed in when needed !\n"); -- goto fail; -- } -+ if (!imask) -+ imask = dummy_imask; - - /* Parse interrupt-map */ - match = 0; - while (imaplen > (addrsize + intsize + 1) && !match) { - /* Compare specifiers */ - match = 1; -- for (i = 0; i < addrsize && match; ++i) { -- __be32 mask = imask ? imask[i] -- : cpu_to_be32(0xffffffffu); -- match = ((addr[i] ^ imap[i]) & mask) == 0; -- } -- for (; i < (addrsize + intsize) && match; ++i) { -- __be32 mask = imask ? imask[i] -- : cpu_to_be32(0xffffffffu); -- match = -- ((intspec[i-addrsize] ^ imap[i]) & mask) == 0; -- } -- imap += addrsize + intsize; -- imaplen -= addrsize + intsize; -+ for (i = 0; i < (addrsize + intsize); i++, imaplen--) -+ match = !((match_array[i] ^ *imap++) & imask[i]); - - pr_debug(" -> match=%d (imaplen=%d)\n", match, imaplen); - -@@ -247,12 +240,18 @@ int of_irq_parse_raw(struct device_node - if (!match) - goto fail; - -- of_node_put(old); -- old = of_node_get(newpar); -+ /* -+ * Successfully parsed an interrrupt-map translation; copy new -+ * interrupt specifier into the out_irq structure -+ */ -+ of_node_put(out_irq->np); -+ out_irq->np = of_node_get(newpar); -+ -+ match_array = imap - newaddrsize - newintsize; -+ for (i = 0; i < newintsize; i++) -+ out_irq->args[i] = be32_to_cpup(imap - newintsize + i); -+ out_irq->args_count = intsize = newintsize; - addrsize = newaddrsize; -- intsize = newintsize; -- intspec = imap - intsize; -- addr = intspec - addrsize; - - skiplevel: - /* Iterate again with new parent */ -@@ -263,7 +262,7 @@ int of_irq_parse_raw(struct device_node - } - fail: - of_node_put(ipar); -- of_node_put(old); -+ of_node_put(out_irq->np); - of_node_put(newpar); - - return -EINVAL; -@@ -276,15 +275,16 @@ EXPORT_SYMBOL_GPL(of_irq_parse_raw); - * @index: index of the interrupt to resolve - * @out_irq: structure of_irq filled by this function - * -- * This function resolves an interrupt, walking the tree, for a given -- * device-tree node. It's the high level pendant to of_irq_parse_raw(). -+ * This function resolves an interrupt for a node by walking the interrupt tree, -+ * finding which interrupt controller node it is attached to, and returning the -+ * interrupt specifier that can be used to retrieve a Linux IRQ number. - */ - int of_irq_parse_one(struct device_node *device, int index, struct of_phandle_args *out_irq) - { - struct device_node *p; - const __be32 *intspec, *tmp, *addr; - u32 intsize, intlen; -- int res = -EINVAL; -+ int i, res = -EINVAL; - - pr_debug("of_irq_parse_one: dev=%s, index=%d\n", of_node_full_name(device), index); - -@@ -326,9 +326,15 @@ int of_irq_parse_one(struct device_node - if ((index + 1) * intsize > intlen) - goto out; - -- /* Get new specifier and map it */ -- res = of_irq_parse_raw(p, intspec + index * intsize, intsize, -- addr, out_irq); -+ /* Copy intspec into irq structure */ -+ intspec += index * intsize; -+ out_irq->np = p; -+ out_irq->args_count = intsize; -+ for (i = 0; i < intsize; i++) -+ out_irq->args[i] = be32_to_cpup(intspec++); -+ -+ /* Check if there are any interrupt-map translations to process */ -+ res = of_irq_parse_raw(addr, out_irq); - out: - of_node_put(p); - return res; ---- a/drivers/of/of_pci_irq.c -+++ b/drivers/of/of_pci_irq.c -@@ -85,9 +85,12 @@ int of_irq_parse_pci(const struct pci_de - pdev = ppdev; - } - -+ out_irq->np = ppnode; -+ out_irq->args_count = 1; -+ out_irq->args[0] = lspec; - lspec_be = cpu_to_be32(lspec); - laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8)); -- laddr[1] = laddr[2] = cpu_to_be32(0); -- return of_irq_parse_raw(ppnode, &lspec_be, 1, laddr, out_irq); -+ laddr[1] = laddr[2] = cpu_to_be32(0); -+ return of_irq_parse_raw(laddr, out_irq); - } - EXPORT_SYMBOL_GPL(of_irq_parse_pci); ---- a/include/linux/of_irq.h -+++ b/include/linux/of_irq.h -@@ -31,10 +31,7 @@ static inline int of_irq_parse_oldworld( - } - #endif /* CONFIG_PPC32 && CONFIG_PPC_PMAC */ - -- --extern int of_irq_parse_raw(struct device_node *parent, const __be32 *intspec, -- u32 ointsize, const __be32 *addr, -- struct of_phandle_args *out_irq); -+extern int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq); - extern int of_irq_parse_one(struct device_node *device, int index, - struct of_phandle_args *out_irq); - extern unsigned int irq_create_of_mapping(struct of_phandle_args *irq_data); diff --git a/target/linux/mvebu/patches-3.10/0187-of-Add-helper-for-printing-an-of_phandle_args-struct.patch b/target/linux/mvebu/patches-3.10/0187-of-Add-helper-for-printing-an-of_phandle_args-struct.patch deleted file mode 100644 index 064e9a2b16..0000000000 --- a/target/linux/mvebu/patches-3.10/0187-of-Add-helper-for-printing-an-of_phandle_args-struct.patch +++ /dev/null @@ -1,62 +0,0 @@ -From 061855025b6842debdf6ea2e8bfd86f50700e263 Mon Sep 17 00:00:00 2001 -From: Grant Likely -Date: Thu, 19 Dec 2013 09:30:58 -0300 -Subject: [PATCH 187/203] of: Add helper for printing an of_phandle_args - structure - -It is sometimes useful for debug to get the contents of an -of_phandle_args structure out into the kernel log. - -Signed-off-by: Grant Likely - -Conflicts: - drivers/of/base.c ---- - drivers/of/base.c | 9 +++++++++ - drivers/of/irq.c | 6 +++--- - include/linux/of.h | 1 + - 3 files changed, 13 insertions(+), 3 deletions(-) - ---- a/drivers/of/base.c -+++ b/drivers/of/base.c -@@ -1136,6 +1136,15 @@ EXPORT_SYMBOL(of_parse_phandle); - * To get a device_node of the `node2' node you may call this: - * of_parse_phandle_with_args(node3, "list", "#list-cells", 1, &args); - */ -+void of_print_phandle_args(const char *msg, const struct of_phandle_args *args) -+{ -+ int i; -+ printk("%s %s", msg, of_node_full_name(args->np)); -+ for (i = 0; i < args->args_count; i++) -+ printk(i ? ",%08x" : ":%08x", args->args[i]); -+ printk("\n"); -+} -+ - static int __of_parse_phandle_with_args(const struct device_node *np, - const char *list_name, - const char *cells_name, int index, ---- a/drivers/of/irq.c -+++ b/drivers/of/irq.c -@@ -101,9 +101,9 @@ int of_irq_parse_raw(const __be32 *addr, - u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0; - int imaplen, match, i; - -- pr_debug("of_irq_parse_raw: par=%s,intspec=[0x%08x 0x%08x...],ointsize=%d\n", -- of_node_full_name(out_irq->np), out_irq->args[0], out_irq->args[1], -- out_irq->args_count); -+#ifdef DEBUG -+ of_print_phandle_args("of_irq_parse_raw: ", out_irq); -+#endif - - ipar = of_node_get(out_irq->np); - ---- a/include/linux/of.h -+++ b/include/linux/of.h -@@ -274,6 +274,7 @@ extern int of_n_size_cells(struct device - extern const struct of_device_id *of_match_node( - const struct of_device_id *matches, const struct device_node *node); - extern int of_modalias_node(struct device_node *node, char *modalias, int len); -+extern void of_print_phandle_args(const char *msg, const struct of_phandle_args *args); - extern struct device_node *of_parse_phandle(const struct device_node *np, - const char *phandle_name, - int index); diff --git a/target/linux/mvebu/patches-3.10/0188-of-irq-Rework-of_irq_count.patch b/target/linux/mvebu/patches-3.10/0188-of-irq-Rework-of_irq_count.patch deleted file mode 100644 index 39fc79488b..0000000000 --- a/target/linux/mvebu/patches-3.10/0188-of-irq-Rework-of_irq_count.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 3665853921092bb68aa0929efb3a94ecdfc96782 Mon Sep 17 00:00:00 2001 -From: Thierry Reding -Date: Thu, 19 Dec 2013 09:30:59 -0300 -Subject: [PATCH 188/203] of/irq: Rework of_irq_count() - -The of_irq_to_resource() helper that is used to implement of_irq_count() -tries to resolve interrupts and in fact creates a mapping for resolved -interrupts. That's pretty heavy lifting for something that claims to -just return the number of interrupts requested by a given device node. - -Instead, use the more lightweight of_irq_map_one(), which, despite the -name, doesn't create an actual mapping. Perhaps a better name would be -of_irq_translate_one(). - -Signed-off-by: Thierry Reding -Acked-by: Rob Herring -[grant.likely: fixup s/of_irq_map_one/of_irq_parse_one/] -Signed-off-by: Grant Likely ---- - drivers/of/irq.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/drivers/of/irq.c -+++ b/drivers/of/irq.c -@@ -379,9 +379,10 @@ EXPORT_SYMBOL_GPL(of_irq_to_resource); - */ - int of_irq_count(struct device_node *dev) - { -+ struct of_phandle_args irq; - int nr = 0; - -- while (of_irq_to_resource(dev, nr, NULL)) -+ while (of_irq_parse_one(dev, nr, &irq) == 0) - nr++; - - return nr; diff --git a/target/linux/mvebu/patches-3.10/0189-of-irq-create-interrupts-extended-property.patch b/target/linux/mvebu/patches-3.10/0189-of-irq-create-interrupts-extended-property.patch deleted file mode 100644 index 7e2e2baa33..0000000000 --- a/target/linux/mvebu/patches-3.10/0189-of-irq-create-interrupts-extended-property.patch +++ /dev/null @@ -1,192 +0,0 @@ -From efd4032754a57bc258eafe30fde684ec47dc36e1 Mon Sep 17 00:00:00 2001 -From: Grant Likely -Date: Thu, 19 Dec 2013 09:31:00 -0300 -Subject: [PATCH 189/203] of/irq: create interrupts-extended property - -The standard interrupts property in device tree can only handle -interrupts coming from a single interrupt parent. If a device is wired -to multiple interrupt controllers, then it needs to be attached to a -node with an interrupt-map property to demux the interrupt specifiers -which is confusing. It would be a lot easier if there was a form of the -interrupts property that allows for a separate interrupt phandle for -each interrupt specifier. - -This patch does exactly that by creating a new interrupts-extended -property which reuses the phandle+arguments pattern used by GPIOs and -other core bindings. - -Signed-off-by: Grant Likely -Acked-by: Tony Lindgren -Acked-by: Kumar Gala -[grant.likely: removed versatile platform hunks into separate patch] -Cc: Rob Herring - -Conflicts: - arch/arm/boot/dts/testcases/tests-interrupts.dtsi - drivers/of/selftest.c ---- - drivers/of/selftest.c | 146 +++++++++++++++++++++++++++++++++++++++++++++++++- - 1 file changed, 145 insertions(+), 1 deletion(-) - ---- a/drivers/of/selftest.c -+++ b/drivers/of/selftest.c -@@ -154,6 +154,147 @@ static void __init of_selftest_property_ - selftest(rc == -EILSEQ, "unterminated string; rc=%i", rc); - } - -+static void __init of_selftest_parse_interrupts(void) -+{ -+ struct device_node *np; -+ struct of_phandle_args args; -+ int i, rc; -+ -+ np = of_find_node_by_path("/testcase-data/interrupts/interrupts0"); -+ if (!np) { -+ pr_err("missing testcase data\n"); -+ return; -+ } -+ -+ for (i = 0; i < 4; i++) { -+ bool passed = true; -+ args.args_count = 0; -+ rc = of_irq_parse_one(np, i, &args); -+ -+ passed &= !rc; -+ passed &= (args.args_count == 1); -+ passed &= (args.args[0] == (i + 1)); -+ -+ selftest(passed, "index %i - data error on node %s rc=%i\n", -+ i, args.np->full_name, rc); -+ } -+ of_node_put(np); -+ -+ np = of_find_node_by_path("/testcase-data/interrupts/interrupts1"); -+ if (!np) { -+ pr_err("missing testcase data\n"); -+ return; -+ } -+ -+ for (i = 0; i < 4; i++) { -+ bool passed = true; -+ args.args_count = 0; -+ rc = of_irq_parse_one(np, i, &args); -+ -+ /* Test the values from tests-phandle.dtsi */ -+ switch (i) { -+ case 0: -+ passed &= !rc; -+ passed &= (args.args_count == 1); -+ passed &= (args.args[0] == 9); -+ break; -+ case 1: -+ passed &= !rc; -+ passed &= (args.args_count == 3); -+ passed &= (args.args[0] == 10); -+ passed &= (args.args[1] == 11); -+ passed &= (args.args[2] == 12); -+ break; -+ case 2: -+ passed &= !rc; -+ passed &= (args.args_count == 2); -+ passed &= (args.args[0] == 13); -+ passed &= (args.args[1] == 14); -+ break; -+ case 3: -+ passed &= !rc; -+ passed &= (args.args_count == 2); -+ passed &= (args.args[0] == 15); -+ passed &= (args.args[1] == 16); -+ break; -+ default: -+ passed = false; -+ } -+ selftest(passed, "index %i - data error on node %s rc=%i\n", -+ i, args.np->full_name, rc); -+ } -+ of_node_put(np); -+} -+ -+static void __init of_selftest_parse_interrupts_extended(void) -+{ -+ struct device_node *np; -+ struct of_phandle_args args; -+ int i, rc; -+ -+ np = of_find_node_by_path("/testcase-data/interrupts/interrupts-extended0"); -+ if (!np) { -+ pr_err("missing testcase data\n"); -+ return; -+ } -+ -+ for (i = 0; i < 7; i++) { -+ bool passed = true; -+ rc = of_irq_parse_one(np, i, &args); -+ -+ /* Test the values from tests-phandle.dtsi */ -+ switch (i) { -+ case 0: -+ passed &= !rc; -+ passed &= (args.args_count == 1); -+ passed &= (args.args[0] == 1); -+ break; -+ case 1: -+ passed &= !rc; -+ passed &= (args.args_count == 3); -+ passed &= (args.args[0] == 2); -+ passed &= (args.args[1] == 3); -+ passed &= (args.args[2] == 4); -+ break; -+ case 2: -+ passed &= !rc; -+ passed &= (args.args_count == 2); -+ passed &= (args.args[0] == 5); -+ passed &= (args.args[1] == 6); -+ break; -+ case 3: -+ passed &= !rc; -+ passed &= (args.args_count == 1); -+ passed &= (args.args[0] == 9); -+ break; -+ case 4: -+ passed &= !rc; -+ passed &= (args.args_count == 3); -+ passed &= (args.args[0] == 10); -+ passed &= (args.args[1] == 11); -+ passed &= (args.args[2] == 12); -+ break; -+ case 5: -+ passed &= !rc; -+ passed &= (args.args_count == 2); -+ passed &= (args.args[0] == 13); -+ passed &= (args.args[1] == 14); -+ break; -+ case 6: -+ passed &= !rc; -+ passed &= (args.args_count == 1); -+ passed &= (args.args[0] == 15); -+ break; -+ default: -+ passed = false; -+ } -+ -+ selftest(passed, "index %i - data error on node %s rc=%i\n", -+ i, args.np->full_name, rc); -+ } -+ of_node_put(np); -+} -+ - static int __init of_selftest(void) - { - struct device_node *np; -@@ -168,7 +309,10 @@ static int __init of_selftest(void) - pr_info("start of selftest - you will see error messages\n"); - of_selftest_parse_phandle_with_args(); - of_selftest_property_match_string(); -- pr_info("end of selftest - %s\n", selftest_passed ? "PASS" : "FAIL"); -+ of_selftest_parse_interrupts(); -+ of_selftest_parse_interrupts_extended(); -+ pr_info("end of selftest - %i passed, %i failed\n", -+ selftest_results.passed, selftest_results.failed); - return 0; - } - late_initcall(of_selftest); diff --git a/target/linux/mvebu/patches-3.10/0190-of-irq-Fix-bug-in-interrupt-parsing-refactor.patch b/target/linux/mvebu/patches-3.10/0190-of-irq-Fix-bug-in-interrupt-parsing-refactor.patch deleted file mode 100644 index 5e1e6053b8..0000000000 --- a/target/linux/mvebu/patches-3.10/0190-of-irq-Fix-bug-in-interrupt-parsing-refactor.patch +++ /dev/null @@ -1,60 +0,0 @@ -From 1c67d6e7cc30a856e79664e0be3a1f705bad56e4 Mon Sep 17 00:00:00 2001 -From: Grant Likely -Date: Thu, 19 Dec 2013 09:31:01 -0300 -Subject: [PATCH 190/203] of/irq: Fix bug in interrupt parsing refactor. - -Commit 2361613206e6, "of/irq: Refactor interrupt-map parsing" introduced -a bug. The irq parsing will fail for some nodes that don't have a reg -property. It is fixed by deferring the check for reg until it is -actually needed. Also adjust the testcase data to catch the bug. - -Signed-off-by: Grant Likely -Tested-by: Stephen Warren -Tested-by: Ming Lei -Tested-by: Stephen Warren -Cc: Rob Herring - -Conflicts: - arch/arm/boot/dts/testcases/tests-interrupts.dtsi ---- - drivers/of/irq.c | 20 ++++++++++---------- - 1 file changed, 10 insertions(+), 10 deletions(-) - ---- a/drivers/of/irq.c -+++ b/drivers/of/irq.c -@@ -147,18 +147,9 @@ int of_irq_parse_raw(const __be32 *addr, - - pr_debug(" -> addrsize=%d\n", addrsize); - -- /* If we were passed no "reg" property and we attempt to parse -- * an interrupt-map, then #address-cells must be 0. -- * Fail if it's not. -- */ -- if (addr == NULL && addrsize != 0) { -- pr_debug(" -> no reg passed in when needed !\n"); -- return -EINVAL; -- } -- - /* Precalculate the match array - this simplifies match loop */ - for (i = 0; i < addrsize; i++) -- initial_match_array[i] = addr[i]; -+ initial_match_array[i] = addr ? addr[i] : 0; - for (i = 0; i < intsize; i++) - initial_match_array[addrsize + i] = cpu_to_be32(out_irq->args[i]); - -@@ -174,6 +165,15 @@ int of_irq_parse_raw(const __be32 *addr, - return 0; - } - -+ /* -+ * interrupt-map parsing does not work without a reg -+ * property when #address-cells != 0 -+ */ -+ if (addrsize && !addr) { -+ pr_debug(" -> no reg passed in when needed !\n"); -+ goto fail; -+ } -+ - /* Now look for an interrupt-map */ - imap = of_get_property(ipar, "interrupt-map", &imaplen); - /* No interrupt map, check for an interrupt parent */ diff --git a/target/linux/mvebu/patches-3.10/0191-of-irq-Fix-potential-buffer-overflow.patch b/target/linux/mvebu/patches-3.10/0191-of-irq-Fix-potential-buffer-overflow.patch deleted file mode 100644 index 9c7908d7b9..0000000000 --- a/target/linux/mvebu/patches-3.10/0191-of-irq-Fix-potential-buffer-overflow.patch +++ /dev/null @@ -1,52 +0,0 @@ -From 5a1bd82f089e19ba049a871a0d5538ed9eb5e5cd Mon Sep 17 00:00:00 2001 -From: Grant Likely -Date: Thu, 19 Dec 2013 09:31:02 -0300 -Subject: [PATCH 191/203] of/irq: Fix potential buffer overflow - -Commit 2361613206e6, "of/irq: Refactor interrupt-map parsing" introduced -a potential buffer overflow bug because it doesn't do sufficient range -checking on the input data. This patch adds the appropriate checking and -buffer size adjustments. If the bounds are out of range then warn -loudly. MAX_PHANDLE_ARGS should be sufficient. If it is not then the -value can be increased. - -Signed-off-by: Grant Likely -Cc: Rob Herring ---- - drivers/of/irq.c | 10 ++++++++-- - 1 file changed, 8 insertions(+), 2 deletions(-) - ---- a/drivers/of/irq.c -+++ b/drivers/of/irq.c -@@ -95,9 +95,9 @@ struct device_node *of_irq_find_parent(s - int of_irq_parse_raw(const __be32 *addr, struct of_phandle_args *out_irq) - { - struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL; -- __be32 initial_match_array[8]; -+ __be32 initial_match_array[MAX_PHANDLE_ARGS]; - const __be32 *match_array = initial_match_array; -- const __be32 *tmp, *imap, *imask, dummy_imask[] = { ~0, ~0, ~0, ~0, ~0 }; -+ const __be32 *tmp, *imap, *imask, dummy_imask[] = { [0 ... MAX_PHANDLE_ARGS] = ~0 }; - u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0; - int imaplen, match, i; - -@@ -147,6 +147,10 @@ int of_irq_parse_raw(const __be32 *addr, - - pr_debug(" -> addrsize=%d\n", addrsize); - -+ /* Range check so that the temporary buffer doesn't overflow */ -+ if (WARN_ON(addrsize + intsize > MAX_PHANDLE_ARGS)) -+ goto fail; -+ - /* Precalculate the match array - this simplifies match loop */ - for (i = 0; i < addrsize; i++) - initial_match_array[i] = addr ? addr[i] : 0; -@@ -229,6 +233,8 @@ int of_irq_parse_raw(const __be32 *addr, - newintsize, newaddrsize); - - /* Check for malformed properties */ -+ if (WARN_ON(newaddrsize + newintsize > MAX_PHANDLE_ARGS)) -+ goto fail; - if (imaplen < (newaddrsize + newintsize)) - goto fail; - diff --git a/target/linux/mvebu/patches-3.10/0192-of-irq-Fix-interrupt-map-entry-matching.patch b/target/linux/mvebu/patches-3.10/0192-of-irq-Fix-interrupt-map-entry-matching.patch deleted file mode 100644 index 3de0b146dd..0000000000 --- a/target/linux/mvebu/patches-3.10/0192-of-irq-Fix-interrupt-map-entry-matching.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 8413f9010508998c62969827850a7434a1d5716c Mon Sep 17 00:00:00 2001 -From: Tomasz Figa -Date: Thu, 19 Dec 2013 09:31:03 -0300 -Subject: [PATCH 192/203] of: irq: Fix interrupt-map entry matching - -This patch fixes interrupt-map entry matching code to properly match all -specifier cells with interrupt map entries. - -Signed-off-by: Tomasz Figa -Tested-by: Sachin Kamat -Signed-off-by: Rob Herring ---- - drivers/of/irq.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/of/irq.c -+++ b/drivers/of/irq.c -@@ -199,7 +199,7 @@ int of_irq_parse_raw(const __be32 *addr, - /* Compare specifiers */ - match = 1; - for (i = 0; i < (addrsize + intsize); i++, imaplen--) -- match = !((match_array[i] ^ *imap++) & imask[i]); -+ match &= !((match_array[i] ^ *imap++) & imask[i]); - - pr_debug(" -> match=%d (imaplen=%d)\n", match, imaplen); - diff --git a/target/linux/mvebu/patches-3.10/0193-clocksource-armada-370-xp-Fix-device-tree-binding.patch b/target/linux/mvebu/patches-3.10/0193-clocksource-armada-370-xp-Fix-device-tree-binding.patch deleted file mode 100644 index 4ee7f3f563..0000000000 --- a/target/linux/mvebu/patches-3.10/0193-clocksource-armada-370-xp-Fix-device-tree-binding.patch +++ /dev/null @@ -1,70 +0,0 @@ -From ba47ab198541f6ed822b3c9691b392d83edba8b4 Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Tue, 13 Aug 2013 11:43:14 -0300 -Subject: [PATCH 193/203] clocksource: armada-370-xp: Fix device-tree binding - -This commit fixes the DT binding for the Armada 370/XP SoC timer. -The previous "marvell,armada-370-xp-timer" compatible is removed and -two new compatible strings are introduced: "marvell,armada-xp-timer" -and "marvell,armada-370-timer". - -The rationale behind this change is that the Armada 370 SoC and the -Armada XP SoC timers are not really compatible: - - * Armada 370 has no 25 MHz fixed timer. - - * Armada XP cannot work properly without such 25 MHz fixed timer - as doing otherwise leads to using a clocksource whose frequency - varies when doing cpufreq frequency changes. - -This commit also removes the "marvell,timer-25Mhz" property, given -it's now meaningless. - -Cc: devicetree@vger.kernel.org -Acked-by: Jason Cooper -Reviewed-by: Andrew Lunn -Signed-off-by: Ezequiel Garcia -Signed-off-by: Daniel Lezcano ---- - .../bindings/timer/marvell,armada-370-xp-timer.txt | 27 ++++++++++++++++++---- - 1 file changed, 22 insertions(+), 5 deletions(-) - ---- a/Documentation/devicetree/bindings/timer/marvell,armada-370-xp-timer.txt -+++ b/Documentation/devicetree/bindings/timer/marvell,armada-370-xp-timer.txt -@@ -2,14 +2,31 @@ Marvell Armada 370 and Armada XP Timers - --------------------------------------- - - Required properties: --- compatible: Should be "marvell,armada-370-xp-timer" -+- compatible: Should be either "marvell,armada-370-timer" or -+ "marvell,armada-xp-timer" as appropriate. - - interrupts: Should contain the list of Global Timer interrupts and - then local timer interrupts - - reg: Should contain location and length for timers register. First - pair for the Global Timer registers, second pair for the - local/private timers. --- clocks: clock driving the timer hardware -+- clocks: clock driving the timer hardware, only required for -+ "marvell,armada-370-timer"; - --Optional properties: --- marvell,timer-25Mhz: Tells whether the Global timer supports the 25 -- Mhz fixed mode (available on Armada XP and not on Armada 370) -+Examples: -+ -+- Armada 370: -+ -+ timer { -+ compatible = "marvell,armada-370-timer"; -+ reg = <0x20300 0x30>, <0x21040 0x30>; -+ interrupts = <37>, <38>, <39>, <40>, <5>, <6>; -+ clocks = <&coreclk 2>; -+ }; -+ -+- Armada XP: -+ -+ timer { -+ compatible = "marvell,armada-xp-timer"; -+ reg = <0x20300 0x30>, <0x21040 0x30>; -+ interrupts = <37>, <38>, <39>, <40>, <5>, <6>; -+ }; diff --git a/target/linux/mvebu/patches-3.10/0194-clocksource-armada-370-xp-Add-detailed-clock-require.patch b/target/linux/mvebu/patches-3.10/0194-clocksource-armada-370-xp-Add-detailed-clock-require.patch deleted file mode 100644 index 333f7b6a9d..0000000000 --- a/target/linux/mvebu/patches-3.10/0194-clocksource-armada-370-xp-Add-detailed-clock-require.patch +++ /dev/null @@ -1,47 +0,0 @@ -From d569707433b26bb70f6b595a480bcfb3043a614c Mon Sep 17 00:00:00 2001 -From: Ezequiel Garcia -Date: Tue, 20 Aug 2013 12:45:54 -0300 -Subject: [PATCH 194/203] clocksource: armada-370-xp: Add detailed clock - requirements in devicetree binding - -Specifies the required clock inputs for each supported compatible. -Armada 370 requires a single clock phandle, and Armada XP requires -two clock phandles with clock-names "nbclk" and "fixed". - -Cc: devicetree@vger.kernel.org -Signed-off-by: Ezequiel Garcia -Signed-off-by: Daniel Lezcano -Acked-by: Jason Cooper -Acked-by: Stephen Warren -Acked-by: Gregory CLEMENT ---- - .../bindings/timer/marvell,armada-370-xp-timer.txt | 13 +++++++++++-- - 1 file changed, 11 insertions(+), 2 deletions(-) - ---- a/Documentation/devicetree/bindings/timer/marvell,armada-370-xp-timer.txt -+++ b/Documentation/devicetree/bindings/timer/marvell,armada-370-xp-timer.txt -@@ -9,8 +9,15 @@ Required properties: - - reg: Should contain location and length for timers register. First - pair for the Global Timer registers, second pair for the - local/private timers. --- clocks: clock driving the timer hardware, only required for -- "marvell,armada-370-timer"; -+ -+Clocks required for compatible = "marvell,armada-370-timer": -+- clocks : Must contain a single entry describing the clock input -+ -+Clocks required for compatible = "marvell,armada-xp-timer": -+- clocks : Must contain an entry for each entry in clock-names. -+- clock-names : Must include the following entries: -+ "nbclk" (L2/coherency fabric clock), -+ "fixed" (Reference 25 MHz fixed-clock). - - Examples: - -@@ -29,4 +36,6 @@ Examples: - compatible = "marvell,armada-xp-timer"; - reg = <0x20300 0x30>, <0x21040 0x30>; - interrupts = <37>, <38>, <39>, <40>, <5>, <6>; -+ clocks = <&coreclk 2>, <&refclk>; -+ clock-names = "nbclk", "fixed"; - }; diff --git a/target/linux/mvebu/patches-3.10/0195-usb-Add-Device-Tree-support-to-XHCI-Platform-driver.patch b/target/linux/mvebu/patches-3.10/0195-usb-Add-Device-Tree-support-to-XHCI-Platform-driver.patch deleted file mode 100644 index 091c3a10a0..0000000000 --- a/target/linux/mvebu/patches-3.10/0195-usb-Add-Device-Tree-support-to-XHCI-Platform-driver.patch +++ /dev/null @@ -1,68 +0,0 @@ -From 956b857c1fc80164859adbe1147704b1f352e153 Mon Sep 17 00:00:00 2001 -From: Al Cooper -Date: Fri, 6 Dec 2013 00:18:25 +0100 -Subject: [PATCH 195/203] usb: Add Device Tree support to XHCI Platform driver - -Add Device Tree match table to xhci-plat.c. Add DT bindings document. - -Signed-off-by: Al Cooper -Cc: Sergei Shtylyov -Cc: Felipe Balbi -Signed-off-by: Sarah Sharp - -Conflicts: - drivers/usb/host/xhci-plat.c ---- - Documentation/devicetree/bindings/usb/usb-xhci.txt | 14 ++++++++++++++ - drivers/usb/host/xhci-plat.c | 10 ++++++++++ - 2 files changed, 24 insertions(+) - create mode 100644 Documentation/devicetree/bindings/usb/usb-xhci.txt - ---- /dev/null -+++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt -@@ -0,0 +1,14 @@ -+USB xHCI controllers -+ -+Required properties: -+ - compatible: should be "xhci-platform". -+ - reg: should contain address and length of the standard XHCI -+ register set for the device. -+ - interrupts: one XHCI interrupt should be described here. -+ -+Example: -+ usb@f0931000 { -+ compatible = "xhci-platform"; -+ reg = <0xf0931000 0x8c8>; -+ interrupts = <0x0 0x4e 0x0>; -+ }; ---- a/drivers/usb/host/xhci-plat.c -+++ b/drivers/usb/host/xhci-plat.c -@@ -14,6 +14,7 @@ - #include - #include - #include -+#include - - #include "xhci.h" - -@@ -186,11 +187,20 @@ static int xhci_plat_remove(struct platf - return 0; - } - -+#ifdef CONFIG_OF -+static const struct of_device_id usb_xhci_of_match[] = { -+ { .compatible = "xhci-platform" }, -+ { }, -+}; -+MODULE_DEVICE_TABLE(of, usb_xhci_of_match); -+#endif -+ - static struct platform_driver usb_xhci_driver = { - .probe = xhci_plat_probe, - .remove = xhci_plat_remove, - .driver = { - .name = "xhci-hcd", -+ .of_match_table = of_match_ptr(usb_xhci_of_match), - }, - }; - MODULE_ALIAS("platform:xhci-hcd"); diff --git a/target/linux/mvebu/patches-3.10/0197-xhci-fix-dma-mask-setup-in-xhci.c.patch b/target/linux/mvebu/patches-3.10/0197-xhci-fix-dma-mask-setup-in-xhci.c.patch deleted file mode 100644 index 1d2e18b52f..0000000000 --- a/target/linux/mvebu/patches-3.10/0197-xhci-fix-dma-mask-setup-in-xhci.c.patch +++ /dev/null @@ -1,124 +0,0 @@ -From 5cb802766e9cdc9a56e8ce8e4686692ebbcfb5cc Mon Sep 17 00:00:00 2001 -From: Xenia Ragiadakou -Date: Mon, 23 Dec 2013 16:59:02 +0100 -Subject: [PATCH 197/203] xhci: fix dma mask setup in xhci.c - -The function dma_set_mask() tests internally whether the dma_mask pointer -for the device is initialized and fails if the dma_mask pointer is NULL. -On pci platforms, the device dma_mask pointer is initialized, when pci -devices are enumerated, to point to the pci_dev->dma_mask which is 0xffffffff. -However, for non-pci platforms, the dma_mask pointer may not be initialized -and in that case dma_set_mask() will fail. - -This patch initializes the dma_mask and the coherent_dma_mask to 32bits -in xhci_plat_probe(), before the call to usb_create_hcd() that sets the -"uses_dma" flag for the usb bus and the call to usb_add_hcd() that creates -coherent dma pools for the usb hcd. - -Moreover, a call to dma_set_mask() does not set the device coherent_dma_mask. -Since the xhci-hcd driver calls dma_alloc_coherent() and dma_pool_alloc() -to allocate consistent DMA memory blocks, the coherent DMA address mask -has to be set explicitly. - -This patch sets the coherent_dma_mask to 64bits in xhci_gen_setup() when -the xHC is capable for 64-bit DMA addressing. - -If dma_set_mask() succeeds, for a given bitmask, it is guaranteed that -the given bitmask is also supported for consistent DMA mappings. - -Other changes introduced in this patch are: - -- The return value of dma_set_mask() is checked to ensure that the required - dma bitmask conforms with the host system's addressing capabilities. - -- The dma_mask setup code for the non-primary hcd was removed since both - primary and non-primary hcd refer to the same generic device whose - dma_mask and coherent_dma_mask are already set during the setup of - the primary hcd. - -- The code for reading the HCCPARAMS register to find out the addressing - capabilities of xHC was removed since its value is already cached in - xhci->hccparams. - -- hcd->self.controller was replaced with the dev variable since it is - already available. - -Signed-off-by: Xenia Ragiadakou -Signed-off-by: Sarah Sharp - -Conflicts: - drivers/usb/host/xhci-plat.c ---- - drivers/usb/host/xhci-plat.c | 10 ++++++++++ - drivers/usb/host/xhci.c | 19 +++++-------------- - 2 files changed, 15 insertions(+), 14 deletions(-) - ---- a/drivers/usb/host/xhci-plat.c -+++ b/drivers/usb/host/xhci-plat.c -@@ -15,6 +15,7 @@ - #include - #include - #include -+#include - - #include "xhci.h" - -@@ -105,6 +106,15 @@ static int xhci_plat_probe(struct platfo - if (!res) - return -ENODEV; - -+ /* Initialize dma_mask and coherent_dma_mask to 32-bits */ -+ ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); -+ if (ret) -+ return ret; -+ if (!pdev->dev.dma_mask) -+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; -+ else -+ dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); -+ - hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); - if (!hcd) - return -ENOMEM; ---- a/drivers/usb/host/xhci.c -+++ b/drivers/usb/host/xhci.c -@@ -4657,7 +4657,6 @@ int xhci_gen_setup(struct usb_hcd *hcd, - struct xhci_hcd *xhci; - struct device *dev = hcd->self.controller; - int retval; -- u32 temp; - - /* Accept arbitrarily long scatter-gather lists */ - hcd->self.sg_tablesize = ~0; -@@ -4685,14 +4684,6 @@ int xhci_gen_setup(struct usb_hcd *hcd, - /* xHCI private pointer was set in xhci_pci_probe for the second - * registered roothub. - */ -- xhci = hcd_to_xhci(hcd); -- temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params); -- if (HCC_64BIT_ADDR(temp)) { -- xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n"); -- dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64)); -- } else { -- dma_set_mask(hcd->self.controller, DMA_BIT_MASK(32)); -- } - return 0; - } - -@@ -4731,12 +4722,12 @@ int xhci_gen_setup(struct usb_hcd *hcd, - goto error; - xhci_dbg(xhci, "Reset complete\n"); - -- temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params); -- if (HCC_64BIT_ADDR(temp)) { -+ /* Set dma_mask and coherent_dma_mask to 64-bits, -+ * if xHC supports 64-bit addressing */ -+ if (HCC_64BIT_ADDR(xhci->hcc_params) && -+ !dma_set_mask(dev, DMA_BIT_MASK(64))) { - xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n"); -- dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64)); -- } else { -- dma_set_mask(hcd->self.controller, DMA_BIT_MASK(32)); -+ dma_set_coherent_mask(dev, DMA_BIT_MASK(64)); - } - - xhci_dbg(xhci, "Calling HCD init\n"); diff --git a/target/linux/mvebu/patches-3.10/0198-of-Add-testcases-for-interrupt-parsing.patch b/target/linux/mvebu/patches-3.10/0198-of-Add-testcases-for-interrupt-parsing.patch deleted file mode 100644 index cbb9252f36..0000000000 --- a/target/linux/mvebu/patches-3.10/0198-of-Add-testcases-for-interrupt-parsing.patch +++ /dev/null @@ -1,104 +0,0 @@ -From 39623dc5cb8814223e9580e22e78dfab10d91783 Mon Sep 17 00:00:00 2001 -From: Grant Likely -Date: Tue, 24 Dec 2013 11:36:02 +0100 -Subject: [PATCH 198/203] of: Add testcases for interrupt parsing - -This patch extends the DT selftest code with some test cases for the -interrupt parsing functions. - -Signed-off-by: Grant Likely ---- - arch/arm/boot/dts/testcases/tests-interrupts.dtsi | 41 +++++++++++++++++++++++ - arch/arm/boot/dts/testcases/tests.dtsi | 1 + - drivers/of/selftest.c | 15 ++++++--- - 3 files changed, 52 insertions(+), 5 deletions(-) - create mode 100644 arch/arm/boot/dts/testcases/tests-interrupts.dtsi - ---- /dev/null -+++ b/arch/arm/boot/dts/testcases/tests-interrupts.dtsi -@@ -0,0 +1,41 @@ -+ -+/ { -+ testcase-data { -+ interrupts { -+ #address-cells = <0>; -+ test_intc0: intc0 { -+ interrupt-controller; -+ #interrupt-cells = <1>; -+ }; -+ -+ test_intc1: intc1 { -+ interrupt-controller; -+ #interrupt-cells = <3>; -+ }; -+ -+ test_intc2: intc2 { -+ interrupt-controller; -+ #interrupt-cells = <2>; -+ }; -+ -+ test_intmap0: intmap0 { -+ #interrupt-cells = <1>; -+ #address-cells = <0>; -+ interrupt-map = <1 &test_intc0 9>, -+ <2 &test_intc1 10 11 12>, -+ <3 &test_intc2 13 14>, -+ <4 &test_intc2 15 16>; -+ }; -+ -+ interrupts0 { -+ interrupt-parent = <&test_intc0>; -+ interrupts = <1>, <2>, <3>, <4>; -+ }; -+ -+ interrupts1 { -+ interrupt-parent = <&test_intmap0>; -+ interrupts = <1>, <2>, <3>, <4>; -+ }; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/testcases/tests.dtsi -+++ b/arch/arm/boot/dts/testcases/tests.dtsi -@@ -1 +1,2 @@ - /include/ "tests-phandle.dtsi" -+/include/ "tests-interrupts.dtsi" ---- a/drivers/of/selftest.c -+++ b/drivers/of/selftest.c -@@ -9,18 +9,24 @@ - #include - #include - #include -+#include - #include - #include - #include - #include - --static bool selftest_passed = true; -+static struct selftest_results { -+ int passed; -+ int failed; -+} selftest_results; -+ - #define selftest(result, fmt, ...) { \ - if (!(result)) { \ -- pr_err("FAIL %s:%i " fmt, __FILE__, __LINE__, ##__VA_ARGS__); \ -- selftest_passed = false; \ -+ selftest_results.failed++; \ -+ pr_err("FAIL %s():%i " fmt, __func__, __LINE__, ##__VA_ARGS__); \ - } else { \ -- pr_info("pass %s:%i\n", __FILE__, __LINE__); \ -+ selftest_results.passed++; \ -+ pr_debug("pass %s():%i\n", __func__, __LINE__); \ - } \ - } - -@@ -131,7 +137,6 @@ static void __init of_selftest_property_ - struct device_node *np; - int rc; - -- pr_info("start\n"); - np = of_find_node_by_path("/testcase-data/phandle-tests/consumer-a"); - if (!np) { - pr_err("No testcase data in device tree\n"); diff --git a/target/linux/mvebu/patches-3.10/0199-PCI-mvebu-Convert-to-use-devm_ioremap_resource.patch b/target/linux/mvebu/patches-3.10/0199-PCI-mvebu-Convert-to-use-devm_ioremap_resource.patch deleted file mode 100644 index 7f1bdb24d6..0000000000 --- a/target/linux/mvebu/patches-3.10/0199-PCI-mvebu-Convert-to-use-devm_ioremap_resource.patch +++ /dev/null @@ -1,44 +0,0 @@ -From 508e3a33ebe14ae4444a45b3f65dff5d5e6a4c73 Mon Sep 17 00:00:00 2001 -From: Tushar Behera -Date: Mon, 17 Jun 2013 14:46:13 +0530 -Subject: [PATCH 199/203] PCI: mvebu: Convert to use devm_ioremap_resource - -Commit 75096579c3ac ("lib: devres: Introduce devm_ioremap_resource()") -introduced devm_ioremap_resource() and deprecated the use of -devm_request_and_ioremap(). - -While at it, modify mvebu_pcie_map_registers() to propagate error code. - -Signed-off-by: Tushar Behera -Signed-off-by: Bjorn Helgaas -Acked-by: Ezequiel Garcia ---- - drivers/pci/host/pci-mvebu.c | 7 ++++--- - 1 file changed, 4 insertions(+), 3 deletions(-) - ---- a/drivers/pci/host/pci-mvebu.c -+++ b/drivers/pci/host/pci-mvebu.c -@@ -736,9 +736,9 @@ mvebu_pcie_map_registers(struct platform - - ret = of_address_to_resource(np, 0, ®s); - if (ret) -- return NULL; -+ return ERR_PTR(ret); - -- return devm_request_and_ioremap(&pdev->dev, ®s); -+ return devm_ioremap_resource(&pdev->dev, ®s); - } - - static void __init mvebu_pcie_msi_enable(struct mvebu_pcie *pcie) -@@ -897,9 +897,10 @@ static int __init mvebu_pcie_probe(struc - } - - port->base = mvebu_pcie_map_registers(pdev, child, port); -- if (!port->base) { -+ if (IS_ERR(port->base)) { - dev_err(&pdev->dev, "PCIe%d.%d: cannot map registers\n", - port->port, port->lane); -+ port->base = NULL; - continue; - } - diff --git a/target/linux/mvebu/patches-3.10/0200-PCI-mvebu-move-clock-enable-before-register-access.patch b/target/linux/mvebu/patches-3.10/0200-PCI-mvebu-move-clock-enable-before-register-access.patch deleted file mode 100644 index 33fba3db7d..0000000000 --- a/target/linux/mvebu/patches-3.10/0200-PCI-mvebu-move-clock-enable-before-register-access.patch +++ /dev/null @@ -1,65 +0,0 @@ -From c524c5790d413b37702013e7e83a845fd3f007ac Mon Sep 17 00:00:00 2001 -From: Sebastian Hesselbarth -Date: Tue, 13 Aug 2013 14:25:20 +0200 -Subject: [PATCH 200/203] PCI: mvebu: move clock enable before register access - -The clock passed to PCI controller found on MVEBU SoCs may come from a -clock gate. This requires the clock to be enabled before any registers -are accessed. Therefore, move the clock enable before register iomap to -ensure it is enabled. - -Signed-off-by: Sebastian Hesselbarth -Signed-off-by: Jason Cooper ---- - drivers/pci/host/pci-mvebu.c | 25 ++++++++++++------------- - 1 file changed, 12 insertions(+), 13 deletions(-) - ---- a/drivers/pci/host/pci-mvebu.c -+++ b/drivers/pci/host/pci-mvebu.c -@@ -896,11 +896,23 @@ static int __init mvebu_pcie_probe(struc - continue; - } - -+ port->clk = of_clk_get_by_name(child, NULL); -+ if (IS_ERR(port->clk)) { -+ dev_err(&pdev->dev, "PCIe%d.%d: cannot get clock\n", -+ port->port, port->lane); -+ continue; -+ } -+ -+ ret = clk_prepare_enable(port->clk); -+ if (ret) -+ continue; -+ - port->base = mvebu_pcie_map_registers(pdev, child, port); - if (IS_ERR(port->base)) { - dev_err(&pdev->dev, "PCIe%d.%d: cannot map registers\n", - port->port, port->lane); - port->base = NULL; -+ clk_disable_unprepare(port->clk); - continue; - } - -@@ -916,22 +928,9 @@ static int __init mvebu_pcie_probe(struc - port->port, port->lane); - } - -- port->clk = of_clk_get_by_name(child, NULL); -- if (!port->clk) { -- dev_err(&pdev->dev, "PCIe%d.%d: cannot get clock\n", -- port->port, port->lane); -- iounmap(port->base); -- port->haslink = 0; -- continue; -- } -- - port->dn = child; -- -- clk_prepare_enable(port->clk); - spin_lock_init(&port->conf_lock); -- - mvebu_sw_pci_bridge_init(port); -- - i++; - } - diff --git a/target/linux/mvebu/patches-3.10/0201-PCI-mvebu-increment-nports-only-for-registered-ports.patch b/target/linux/mvebu/patches-3.10/0201-PCI-mvebu-increment-nports-only-for-registered-ports.patch deleted file mode 100644 index 810fbe19e7..0000000000 --- a/target/linux/mvebu/patches-3.10/0201-PCI-mvebu-increment-nports-only-for-registered-ports.patch +++ /dev/null @@ -1,47 +0,0 @@ -From e619fe9eb65d8064739f16eca2015145ac920f13 Mon Sep 17 00:00:00 2001 -From: Sebastian Hesselbarth -Date: Tue, 13 Aug 2013 14:25:21 +0200 -Subject: [PATCH 201/203] PCI: mvebu: increment nports only for registered - ports - -The number of ports is probed by counting the number of available child nodes. -Later on, the registration of a port can fail and cause a mismatch between -the ->nports counter and registered ports. This patch modifies the counting -strategy, to make ->nports represent the number of registered ports instead -of the number of available childs. - -Signed-off-by: Sebastian Hesselbarth -Signed-off-by: Jason Cooper ---- - drivers/pci/host/pci-mvebu.c | 7 ++++--- - 1 file changed, 4 insertions(+), 3 deletions(-) - ---- a/drivers/pci/host/pci-mvebu.c -+++ b/drivers/pci/host/pci-mvebu.c -@@ -841,13 +841,14 @@ static int __init mvebu_pcie_probe(struc - return ret; - } - -+ i = 0; - for_each_child_of_node(pdev->dev.of_node, child) { - if (!of_device_is_available(child)) - continue; -- pcie->nports++; -+ i++; - } - -- pcie->ports = devm_kzalloc(&pdev->dev, pcie->nports * -+ pcie->ports = devm_kzalloc(&pdev->dev, i * - sizeof(struct mvebu_pcie_port), - GFP_KERNEL); - if (!pcie->ports) -@@ -934,8 +935,8 @@ static int __init mvebu_pcie_probe(struc - i++; - } - -+ pcie->nports = i; - mvebu_pcie_msi_enable(pcie); -- - mvebu_pcie_enable(pcie); - - return 0; diff --git a/target/linux/mvebu/patches-3.10/0202-ARM-mvebu-second-PCIe-unit-of-Armada-XP-mv78230-is-o.patch b/target/linux/mvebu/patches-3.10/0202-ARM-mvebu-second-PCIe-unit-of-Armada-XP-mv78230-is-o.patch deleted file mode 100644 index af2a59a671..0000000000 --- a/target/linux/mvebu/patches-3.10/0202-ARM-mvebu-second-PCIe-unit-of-Armada-XP-mv78230-is-o.patch +++ /dev/null @@ -1,85 +0,0 @@ -From b2ea44bd7bca49fe5696857327a1d1514edd1196 Mon Sep 17 00:00:00 2001 -From: Arnaud Ebalard -Date: Tue, 5 Nov 2013 21:45:48 +0100 -Subject: [PATCH 202/203] ARM: mvebu: second PCIe unit of Armada XP mv78230 is - only x1 capable - -Various Marvell datasheets advertise second PCIe unit of mv78230 -flavour of Armada XP as x4/quad x1 capable. This second unit is in -fact only x1 capable. This patch fixes current mv78230 .dtsi to -reflect that, i.e. makes 1.0 the second interface (instead of 2.0 -at the moment). This was successfully tested on a mv78230-based -ReadyNAS 2120 platform with a x1 device (FL1009 XHCI controller) -connected to this second interface. - -Signed-off-by: Arnaud Ebalard -Acked-by: Thomas Petazzoni -Cc: # v3.10.x -Signed-off-by: Jason Cooper ---- - arch/arm/boot/dts/armada-xp-mv78230.dtsi | 24 ++++++++++++------------ - 1 file changed, 12 insertions(+), 12 deletions(-) - ---- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi -+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi -@@ -47,7 +47,7 @@ - /* - * MV78230 has 2 PCIe units Gen2.0: One unit can be - * configured as x4 or quad x1 lanes. One unit is -- * x4/x1. -+ * x1 only. - */ - pcie-controller { - compatible = "marvell,armada-xp-pcie"; -@@ -62,10 +62,10 @@ - - ranges = - <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ -- 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ - 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ - 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ - 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ -+ 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ - 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ - 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ - 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ -@@ -74,8 +74,8 @@ - 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ - 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ - 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ -- 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ -- 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>; -+ 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ -+ 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */>; - - pcie@1,0 { - device_type = "pci"; -@@ -145,20 +145,20 @@ - status = "disabled"; - }; - -- pcie@9,0 { -+ pcie@5,0 { - device_type = "pci"; -- assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; -- reg = <0x4800 0 0 0 0>; -+ assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; -+ reg = <0x2800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; -- ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 -- 0x81000000 0 0 0x81000000 0x9 0 1 0>; -+ ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 -+ 0x81000000 0 0 0x81000000 0x5 0 1 0>; - interrupt-map-mask = <0 0 0 0>; -- interrupt-map = <0 0 0 0 &mpic 99>; -- marvell,pcie-port = <2>; -+ interrupt-map = <0 0 0 0 &mpic 62>; -+ marvell,pcie-port = <1>; - marvell,pcie-lane = <0>; -- clocks = <&gateclk 26>; -+ clocks = <&gateclk 9>; - status = "disabled"; - }; - }; diff --git a/target/linux/mvebu/patches-3.10/0203-ARM-mvebu-fix-second-and-third-PCIe-unit-of-Armada-X.patch b/target/linux/mvebu/patches-3.10/0203-ARM-mvebu-fix-second-and-third-PCIe-unit-of-Armada-X.patch deleted file mode 100644 index 70953bfe55..0000000000 --- a/target/linux/mvebu/patches-3.10/0203-ARM-mvebu-fix-second-and-third-PCIe-unit-of-Armada-X.patch +++ /dev/null @@ -1,180 +0,0 @@ -From 9c2caf4d2d60780182d7754896c41496192b99c2 Mon Sep 17 00:00:00 2001 -From: Arnaud Ebalard -Date: Tue, 5 Nov 2013 21:46:02 +0100 -Subject: [PATCH 203/203] ARM: mvebu: fix second and third PCIe unit of Armada - XP mv78260 - -mv78260 flavour of Marvell Armada XP SoC has 3 PCIe units. The -two first units are both x4 and quad x1 capable. The third unit -is only x4 capable. This patch fixes mv78260 .dtsi to reflect -those capabilities. - -Signed-off-by: Arnaud Ebalard -Acked-by: Thomas Petazzoni -Cc: # v3.10.x -Signed-off-by: Jason Cooper ---- - arch/arm/boot/dts/armada-xp-mv78260.dtsi | 109 ++++++++++++++++++++++++------- - 1 file changed, 85 insertions(+), 24 deletions(-) - ---- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi -+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi -@@ -48,7 +48,7 @@ - /* - * MV78260 has 3 PCIe units Gen2.0: Two units can be - * configured as x4 or quad x1 lanes. One unit is -- * x4/x1. -+ * x4 only. - */ - pcie-controller { - compatible = "marvell,armada-xp-pcie"; -@@ -68,7 +68,9 @@ - 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ - 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ - 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ -- 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */ -+ 0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */ -+ 0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */ -+ 0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */ - 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ - 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ - 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ -@@ -77,10 +79,18 @@ - 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ - 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ - 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ -- 0x82000000 0x9 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ -- 0x81000000 0x9 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ -- 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */ -- 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>; -+ -+ 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ -+ 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ -+ 0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */ -+ 0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */ -+ 0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */ -+ 0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */ -+ 0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */ -+ 0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */ -+ -+ 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ -+ 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>; - - pcie@1,0 { - device_type = "pci"; -@@ -106,8 +116,8 @@ - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; -- ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 -- 0x81000000 0 0 0x81000000 0x2 0 1 0>; -+ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 -+ 0x81000000 0 0 0x81000000 0x2 0 1 0>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 59>; - marvell,pcie-port = <0>; -@@ -150,37 +160,88 @@ - status = "disabled"; - }; - -- pcie@9,0 { -+ pcie@5,0 { - device_type = "pci"; -- assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; -- reg = <0x4800 0 0 0 0>; -+ assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; -+ reg = <0x2800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; -- ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 -- 0x81000000 0 0 0x81000000 0x9 0 1 0>; -+ ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 -+ 0x81000000 0 0 0x81000000 0x5 0 1 0>; - interrupt-map-mask = <0 0 0 0>; -- interrupt-map = <0 0 0 0 &mpic 99>; -- marvell,pcie-port = <2>; -+ interrupt-map = <0 0 0 0 &mpic 62>; -+ marvell,pcie-port = <1>; - marvell,pcie-lane = <0>; -- clocks = <&gateclk 26>; -+ clocks = <&gateclk 9>; - status = "disabled"; - }; - -- pcie@10,0 { -+ pcie@6,0 { - device_type = "pci"; -- assigned-addresses = <0x82000800 0 0x82000 0 0x2000>; -- reg = <0x5000 0 0 0 0>; -+ assigned-addresses = <0x82000800 0 0x84000 0 0x2000>; -+ reg = <0x3000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; -- ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0 -- 0x81000000 0 0 0x81000000 0xa 0 1 0>; -+ ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0 -+ 0x81000000 0 0 0x81000000 0x6 0 1 0>; - interrupt-map-mask = <0 0 0 0>; -- interrupt-map = <0 0 0 0 &mpic 103>; -- marvell,pcie-port = <3>; -+ interrupt-map = <0 0 0 0 &mpic 63>; -+ marvell,pcie-port = <1>; -+ marvell,pcie-lane = <1>; -+ clocks = <&gateclk 10>; -+ status = "disabled"; -+ }; -+ -+ pcie@7,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82000800 0 0x88000 0 0x2000>; -+ reg = <0x3800 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0 -+ 0x81000000 0 0 0x81000000 0x7 0 1 0>; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &mpic 64>; -+ marvell,pcie-port = <1>; -+ marvell,pcie-lane = <2>; -+ clocks = <&gateclk 11>; -+ status = "disabled"; -+ }; -+ -+ pcie@8,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>; -+ reg = <0x4000 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0 -+ 0x81000000 0 0 0x81000000 0x8 0 1 0>; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &mpic 65>; -+ marvell,pcie-port = <1>; -+ marvell,pcie-lane = <3>; -+ clocks = <&gateclk 12>; -+ status = "disabled"; -+ }; -+ -+ pcie@9,0 { -+ device_type = "pci"; -+ assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; -+ reg = <0x4800 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ #interrupt-cells = <1>; -+ ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 -+ 0x81000000 0 0 0x81000000 0x9 0 1 0>; -+ interrupt-map-mask = <0 0 0 0>; -+ interrupt-map = <0 0 0 0 &mpic 99>; -+ marvell,pcie-port = <2>; - marvell,pcie-lane = <0>; -- clocks = <&gateclk 27>; -+ clocks = <&gateclk 26>; - status = "disabled"; - }; - }; diff --git a/target/linux/mvebu/patches-3.10/0300-build_mamba_dts.patch b/target/linux/mvebu/patches-3.10/0300-build_mamba_dts.patch deleted file mode 100644 index 56180445f1..0000000000 --- a/target/linux/mvebu/patches-3.10/0300-build_mamba_dts.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -94,6 +94,7 @@ dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.d - dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ - armada-370-mirabox.dtb \ - armada-370-rd.dtb \ -+ armada-xp-mamba.dtb \ - armada-xp-db.dtb \ - armada-xp-gp.dtb \ - armada-xp-openblocks-ax3-4.dtb ---- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi -+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi -@@ -196,8 +196,6 @@ - #interrupt-cells = <2>; - interrupts = <87>, <88>, <89>; - }; -- -- /* - }; - }; - };