From: Faiz Abbas Date: Fri, 5 Apr 2019 08:48:44 +0000 (+0530) Subject: ARM: dts: dra7: Change pbias voltage to 3.3V X-Git-Tag: v2019.07-rc1~31^2~2 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=2499a04617ec860bf7576d05a422a16e318354bf;p=oweals%2Fu-boot.git ARM: dts: dra7: Change pbias voltage to 3.3V As per recent TRM[1], PBIAS cell on dra7 devices supports 3.3v and not 3.0v as documented earlier. Update PBIAS regulator max voltage and the voltage written in the driver to reflect this. [1] http://www.ti.com/lit/pdf/sprui30 Signed-off-by: Faiz Abbas --- diff --git a/arch/arm/dts/dra7.dtsi b/arch/arm/dts/dra7.dtsi index 0f982d8b44..fd1aea0b1b 100644 --- a/arch/arm/dts/dra7.dtsi +++ b/arch/arm/dts/dra7.dtsi @@ -170,7 +170,7 @@ pbias_mmc_reg: pbias_mmc_omap5 { regulator-name = "pbias_mmc_omap5"; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; }; }; diff --git a/drivers/power/regulator/pbias_regulator.c b/drivers/power/regulator/pbias_regulator.c index 4ed3c94e03..88dc9f273a 100644 --- a/drivers/power/regulator/pbias_regulator.c +++ b/drivers/power/regulator/pbias_regulator.c @@ -238,7 +238,7 @@ static int pbias_regulator_set_value(struct udevice *dev, int uV) if (rc) return rc; - if (uV == 3000000) + if (uV == 3300000) reg |= p->vmode; else if (uV == 1800000) reg &= ~p->vmode;