From: Rajesh Bhagat Date: Wed, 17 Jan 2018 10:43:05 +0000 (+0530) Subject: board: common: vid: Add support for LTC3882 voltage regulator chip X-Git-Tag: v2018.03-rc1~100^2~9 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=23a12cb3d05ee2caa860bee7b6f0ebcb40afacce;p=oweals%2Fu-boot.git board: common: vid: Add support for LTC3882 voltage regulator chip Restructures common driver to support LTC3882 voltage regulator chip. Signed-off-by: Ashish Kumar Signed-off-by: Rajesh Bhagat Reviewed-by: York Sun --- diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h index 47e8b5a62e..642df2f50a 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h @@ -201,10 +201,15 @@ struct ccsr_gur { u32 gpporcr3; u32 gpporcr4; u8 res_030[0x60-0x30]; -#define FSL_CHASSIS3_DCFG_FUSESR_VID_SHIFT 2 #define FSL_CHASSIS3_DCFG_FUSESR_VID_MASK 0x1F -#define FSL_CHASSIS3_DCFG_FUSESR_ALTVID_SHIFT 7 #define FSL_CHASSIS3_DCFG_FUSESR_ALTVID_MASK 0x1F +#if defined(CONFIG_ARCH_LS1088A) +#define FSL_CHASSIS3_DCFG_FUSESR_VID_SHIFT 25 +#define FSL_CHASSIS3_DCFG_FUSESR_ALTVID_SHIFT 20 +#else +#define FSL_CHASSIS3_DCFG_FUSESR_VID_SHIFT 2 +#define FSL_CHASSIS3_DCFG_FUSESR_ALTVID_SHIFT 7 +#endif u32 dcfg_fusesr; /* Fuse status register */ u8 res_064[0x70-0x64]; u32 devdisr; /* Device disable control 1 */ diff --git a/board/freescale/common/vid.c b/board/freescale/common/vid.c index f68068eaf8..a9451c5c6e 100644 --- a/board/freescale/common/vid.c +++ b/board/freescale/common/vid.c @@ -174,6 +174,36 @@ static int read_voltage_from_IR(int i2caddress) } #endif +#ifdef CONFIG_VOL_MONITOR_LTC3882_READ +/* read the current value of the LTC Regulator Voltage */ +static int read_voltage_from_LTC(int i2caddress) +{ + int ret, vcode = 0; + u8 chan = PWM_CHANNEL0; + + /* select the PAGE 0 using PMBus commands PAGE for VDD*/ + ret = i2c_write(I2C_VOL_MONITOR_ADDR, + PMBUS_CMD_PAGE, 1, &chan, 1); + if (ret) { + printf("VID: failed to select VDD Page 0\n"); + return ret; + } + + /*read the output voltage using PMBus command READ_VOUT*/ + ret = i2c_read(I2C_VOL_MONITOR_ADDR, + PMBUS_CMD_READ_VOUT, 1, (void *)&vcode, 2); + if (ret) { + printf("VID: failed to read the volatge\n"); + return ret; + } + + /* Scale down to the real mV as LTC resolution is 1/4096V,rounding up */ + vcode = DIV_ROUND_UP(vcode * 1000, 4096); + + return vcode; +} +#endif + static int read_voltage(int i2caddress) { int voltage_read; @@ -181,6 +211,8 @@ static int read_voltage(int i2caddress) voltage_read = read_voltage_from_INA220(i2caddress); #elif defined CONFIG_VOL_MONITOR_IR36021_READ voltage_read = read_voltage_from_IR(i2caddress); +#elif defined CONFIG_VOL_MONITOR_LTC3882_READ + voltage_read = read_voltage_from_LTC(i2caddress); #else return -1; #endif @@ -281,6 +313,43 @@ static int set_voltage_to_IR(int i2caddress, int vdd) debug("VID: Current voltage is %d mV\n", vdd_last); return vdd_last; } + +#endif + +#ifdef CONFIG_VOL_MONITOR_LTC3882_SET +/* this function sets the VDD and returns the value set */ +static int set_voltage_to_LTC(int i2caddress, int vdd) +{ + int ret, vdd_last, vdd_target = vdd; + + /* Scale up to the LTC resolution is 1/4096V */ + vdd = (vdd * 4096) / 1000; + + /* 5-byte buffer which needs to be sent following the + * PMBus command PAGE_PLUS_WRITE. + */ + u8 buff[5] = {0x04, PWM_CHANNEL0, PMBUS_CMD_VOUT_COMMAND, + vdd & 0xFF, (vdd & 0xFF00) >> 8}; + + /* Write the desired voltage code to the regulator */ + ret = i2c_write(I2C_VOL_MONITOR_ADDR, + PMBUS_CMD_PAGE_PLUS_WRITE, 1, (void *)&buff, 5); + if (ret) { + printf("VID: I2C failed to write to the volatge regulator\n"); + return -1; + } + + /* Wait for the volatge to get to the desired value */ + do { + vdd_last = read_voltage_from_LTC(i2caddress); + if (vdd_last < 0) { + printf("VID: Couldn't read sensor abort VID adjust\n"); + return -1; + } + } while (vdd_last != vdd_target); + + return vdd_last; +} #endif static int set_voltage(int i2caddress, int vdd) @@ -289,6 +358,8 @@ static int set_voltage(int i2caddress, int vdd) #ifdef CONFIG_VOL_MONITOR_IR36021_SET vdd_last = set_voltage_to_IR(i2caddress, vdd); +#elif defined CONFIG_VOL_MONITOR_LTC3882_SET + vdd_last = set_voltage_to_LTC(i2caddress, vdd); #else #error Specific voltage monitor must be defined #endif @@ -472,6 +543,11 @@ int adjust_vdd(ulong vdd_override) } vdd_current = vdd_last; debug("VID: Core voltage is currently at %d mV\n", vdd_last); + +#ifdef CONFIG_VOL_MONITOR_LTC3882_SET + /* Set the target voltage */ + vdd_last = vdd_current = set_voltage(i2caddress, vdd_target); +#else /* * Adjust voltage to at or one step above target. * As measurements are less precise than setting the values @@ -489,6 +565,7 @@ int adjust_vdd(ulong vdd_override) vdd_last = set_voltage(i2caddress, vdd_current); } +#endif if (board_adjust_vdd(vdd_target) < 0) { ret = -1; goto exit; diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h index 8fbf89001e..ff2f916e56 100644 --- a/include/configs/ls1088aqds.h +++ b/include/configs/ls1088aqds.h @@ -279,6 +279,22 @@ unsigned long get_board_ddr_clk(void); #define I2C_MUX_CH_DEFAULT 0x8 #define I2C_MUX_CH5 0xD +#define I2C_MUX_CH_VOL_MONITOR 0xA + +/* Voltage monitor on channel 2*/ +#define I2C_VOL_MONITOR_ADDR 0x63 +#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 +#define I2C_VOL_MONITOR_BUS_V_OVF 0x1 +#define I2C_VOL_MONITOR_BUS_V_SHIFT 3 + +/* PM Bus commands code for LTC3882*/ +#define PMBUS_CMD_PAGE 0x0 +#define PMBUS_CMD_READ_VOUT 0x8B +#define PMBUS_CMD_PAGE_PLUS_WRITE 0x05 +#define PMBUS_CMD_VOUT_COMMAND 0x21 + +#define PWM_CHANNEL0 0x0 + /* * RTC configuration */ diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h index d0066e3551..4c290c5cbe 100644 --- a/include/configs/ls1088ardb.h +++ b/include/configs/ls1088ardb.h @@ -225,6 +225,21 @@ #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000 +#define I2C_MUX_CH_VOL_MONITOR 0xA +/* Voltage monitor on channel 2*/ +#define I2C_VOL_MONITOR_ADDR 0x63 +#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 +#define I2C_VOL_MONITOR_BUS_V_OVF 0x1 +#define I2C_VOL_MONITOR_BUS_V_SHIFT 3 + +/* PM Bus commands code for LTC3882*/ +#define PMBUS_CMD_PAGE 0x0 +#define PMBUS_CMD_READ_VOUT 0x8B +#define PMBUS_CMD_PAGE_PLUS_WRITE 0x05 +#define PMBUS_CMD_VOUT_COMMAND 0x21 + +#define PWM_CHANNEL0 0x0 + /* * I2C bus multiplexer */