From: Ryder Lee Date: Thu, 22 Aug 2019 10:26:50 +0000 (+0200) Subject: phy: mediatek: add MediaTek T-PHY support for PCIe X-Git-Tag: v2020.01-rc1~28^2~18 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=235bad02e57db3f66473c45677a30886ddd01541;p=oweals%2Fu-boot.git phy: mediatek: add MediaTek T-PHY support for PCIe The driver provides PHY for USB2, USB3.0, PCIe and SATA, and now we just enable PCIe. As for the other functionalities will be added gradually in upcoming days. This is adapted from the Linux version. Tested-by: Frank Wunderlich Signed-off-by: Ryder Lee Signed-off-by: Frank Wunderlich --- diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 02312273e2..e317373a5c 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -205,4 +205,15 @@ config MT76X8_USB_PHY This PHY is found on MT76x8 devices supporting USB. +config PHY_MTK_TPHY + bool "MediaTek T-PHY Driver" + depends on PHY + depends on ARCH_MEDIATEK + help + MediaTek T-PHY driver supports usb2.0, usb3.0 ports, PCIe and + SATA, and meanwhile supports two version T-PHY which have + different banks layout, the T-PHY with shared banks between + multi-ports is first version, otherwise is second veriosn, + so you can easily distinguish them by banks layout. + endmenu diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 3157f1b7ee..43ce62e08c 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -23,3 +23,4 @@ obj-$(CONFIG_OMAP_USB2_PHY) += omap-usb2-phy.o obj-$(CONFIG_KEYSTONE_USB_PHY) += keystone-usb-phy.o obj-$(CONFIG_MT76X8_USB_PHY) += mt76x8-usb-phy.o obj-$(CONFIG_PHY_DA8XX_USB) += phy-da8xx-usb.o +obj-$(CONFIG_PHY_MTK_TPHY) += phy-mtk-tphy.o diff --git a/drivers/phy/phy-mtk-tphy.c b/drivers/phy/phy-mtk-tphy.c new file mode 100644 index 0000000000..3701481256 --- /dev/null +++ b/drivers/phy/phy-mtk-tphy.c @@ -0,0 +1,362 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2015 - 2019 MediaTek Inc. + * Author: Chunfeng Yun + * Ryder Lee + */ + +#include +#include +#include +#include +#include +#include + +#include + +/* version V1 sub-banks offset base address */ +/* banks shared by multiple phys */ +#define SSUSB_SIFSLV_V1_SPLLC 0x000 /* shared by u3 phys */ +#define SSUSB_SIFSLV_V1_CHIP 0x300 /* shared by u3 phys */ +/* u3/pcie/sata phy banks */ +#define SSUSB_SIFSLV_V1_U3PHYD 0x000 +#define SSUSB_SIFSLV_V1_U3PHYA 0x200 + +#define U3P_U3_CHIP_GPIO_CTLD 0x0c +#define P3C_REG_IP_SW_RST BIT(31) +#define P3C_MCU_BUS_CK_GATE_EN BIT(30) +#define P3C_FORCE_IP_SW_RST BIT(29) + +#define U3P_U3_CHIP_GPIO_CTLE 0x10 +#define P3C_RG_SWRST_U3_PHYD BIT(25) +#define P3C_RG_SWRST_U3_PHYD_FORCE_EN BIT(24) + +#define U3P_U3_PHYA_REG0 0x000 +#define P3A_RG_CLKDRV_OFF GENMASK(3, 2) +#define P3A_RG_CLKDRV_OFF_VAL(x) ((0x3 & (x)) << 2) + +#define U3P_U3_PHYA_REG1 0x004 +#define P3A_RG_CLKDRV_AMP GENMASK(31, 29) +#define P3A_RG_CLKDRV_AMP_VAL(x) ((0x7 & (x)) << 29) + +#define U3P_U3_PHYA_DA_REG0 0x100 +#define P3A_RG_XTAL_EXT_PE2H GENMASK(17, 16) +#define P3A_RG_XTAL_EXT_PE2H_VAL(x) ((0x3 & (x)) << 16) +#define P3A_RG_XTAL_EXT_PE1H GENMASK(13, 12) +#define P3A_RG_XTAL_EXT_PE1H_VAL(x) ((0x3 & (x)) << 12) +#define P3A_RG_XTAL_EXT_EN_U3 GENMASK(11, 10) +#define P3A_RG_XTAL_EXT_EN_U3_VAL(x) ((0x3 & (x)) << 10) + +#define U3P_U3_PHYA_DA_REG4 0x108 +#define P3A_RG_PLL_DIVEN_PE2H GENMASK(21, 19) +#define P3A_RG_PLL_BC_PE2H GENMASK(7, 6) +#define P3A_RG_PLL_BC_PE2H_VAL(x) ((0x3 & (x)) << 6) + +#define U3P_U3_PHYA_DA_REG5 0x10c +#define P3A_RG_PLL_BR_PE2H GENMASK(29, 28) +#define P3A_RG_PLL_BR_PE2H_VAL(x) ((0x3 & (x)) << 28) +#define P3A_RG_PLL_IC_PE2H GENMASK(15, 12) +#define P3A_RG_PLL_IC_PE2H_VAL(x) ((0xf & (x)) << 12) + +#define U3P_U3_PHYA_DA_REG6 0x110 +#define P3A_RG_PLL_IR_PE2H GENMASK(19, 16) +#define P3A_RG_PLL_IR_PE2H_VAL(x) ((0xf & (x)) << 16) + +#define U3P_U3_PHYA_DA_REG7 0x114 +#define P3A_RG_PLL_BP_PE2H GENMASK(19, 16) +#define P3A_RG_PLL_BP_PE2H_VAL(x) ((0xf & (x)) << 16) + +#define U3P_U3_PHYA_DA_REG20 0x13c +#define P3A_RG_PLL_DELTA1_PE2H GENMASK(31, 16) +#define P3A_RG_PLL_DELTA1_PE2H_VAL(x) ((0xffff & (x)) << 16) + +#define U3P_U3_PHYA_DA_REG25 0x148 +#define P3A_RG_PLL_DELTA_PE2H GENMASK(15, 0) +#define P3A_RG_PLL_DELTA_PE2H_VAL(x) (0xffff & (x)) + +#define U3P_U3_PHYD_RXDET1 0x128 +#define P3D_RG_RXDET_STB2_SET GENMASK(17, 9) +#define P3D_RG_RXDET_STB2_SET_VAL(x) ((0x1ff & (x)) << 9) + +#define U3P_U3_PHYD_RXDET2 0x12c +#define P3D_RG_RXDET_STB2_SET_P3 GENMASK(8, 0) +#define P3D_RG_RXDET_STB2_SET_P3_VAL(x) (0x1ff & (x)) + +struct u3phy_banks { + void __iomem *spllc; + void __iomem *chip; + void __iomem *phyd; /* include u3phyd_bank2 */ + void __iomem *phya; /* include u3phya_da */ +}; + +struct mtk_phy_instance { + void __iomem *port_base; + const struct device_node *np; + + struct u3phy_banks u3_banks; + + /* reference clock of anolog phy */ + struct clk ref_clk; + u32 index; + u8 type; +}; + +struct mtk_tphy { + void __iomem *sif_base; + struct mtk_phy_instance **phys; + int nphys; +}; + +static void pcie_phy_instance_init(struct mtk_tphy *tphy, + struct mtk_phy_instance *instance) +{ + struct u3phy_banks *u3_banks = &instance->u3_banks; + + clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_DA_REG0, + P3A_RG_XTAL_EXT_PE1H | P3A_RG_XTAL_EXT_PE2H, + P3A_RG_XTAL_EXT_PE1H_VAL(0x2) | + P3A_RG_XTAL_EXT_PE2H_VAL(0x2)); + + /* ref clk drive */ + clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_REG1, P3A_RG_CLKDRV_AMP, + P3A_RG_CLKDRV_AMP_VAL(0x4)); + clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_REG0, P3A_RG_CLKDRV_OFF, + P3A_RG_CLKDRV_OFF_VAL(0x1)); + + /* SSC delta -5000ppm */ + clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_DA_REG20, + P3A_RG_PLL_DELTA1_PE2H, + P3A_RG_PLL_DELTA1_PE2H_VAL(0x3c)); + + clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_DA_REG25, + P3A_RG_PLL_DELTA_PE2H, + P3A_RG_PLL_DELTA_PE2H_VAL(0x36)); + + /* change pll BW 0.6M */ + clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_DA_REG5, + P3A_RG_PLL_BR_PE2H | P3A_RG_PLL_IC_PE2H, + P3A_RG_PLL_BR_PE2H_VAL(0x1) | + P3A_RG_PLL_IC_PE2H_VAL(0x1)); + clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_DA_REG4, + P3A_RG_PLL_DIVEN_PE2H | P3A_RG_PLL_BC_PE2H, + P3A_RG_PLL_BC_PE2H_VAL(0x3)); + + clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_DA_REG6, + P3A_RG_PLL_IR_PE2H, P3A_RG_PLL_IR_PE2H_VAL(0x2)); + clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_DA_REG7, + P3A_RG_PLL_BP_PE2H, P3A_RG_PLL_BP_PE2H_VAL(0xa)); + + /* Tx Detect Rx Timing: 10us -> 5us */ + clrsetbits_le32(u3_banks->phyd + U3P_U3_PHYD_RXDET1, + P3D_RG_RXDET_STB2_SET, + P3D_RG_RXDET_STB2_SET_VAL(0x10)); + clrsetbits_le32(u3_banks->phyd + U3P_U3_PHYD_RXDET2, + P3D_RG_RXDET_STB2_SET_P3, + P3D_RG_RXDET_STB2_SET_P3_VAL(0x10)); + + /* wait for PCIe subsys register to active */ + udelay(3000); +} + +static void pcie_phy_instance_power_on(struct mtk_tphy *tphy, + struct mtk_phy_instance *instance) +{ + struct u3phy_banks *bank = &instance->u3_banks; + + clrbits_le32(bank->chip + U3P_U3_CHIP_GPIO_CTLD, + P3C_FORCE_IP_SW_RST | P3C_REG_IP_SW_RST); + clrbits_le32(bank->chip + U3P_U3_CHIP_GPIO_CTLE, + P3C_RG_SWRST_U3_PHYD_FORCE_EN | P3C_RG_SWRST_U3_PHYD); +} + +static void pcie_phy_instance_power_off(struct mtk_tphy *tphy, + struct mtk_phy_instance *instance) + +{ + struct u3phy_banks *bank = &instance->u3_banks; + + setbits_le32(bank->chip + U3P_U3_CHIP_GPIO_CTLD, + P3C_FORCE_IP_SW_RST | P3C_REG_IP_SW_RST); + setbits_le32(bank->chip + U3P_U3_CHIP_GPIO_CTLE, + P3C_RG_SWRST_U3_PHYD_FORCE_EN | P3C_RG_SWRST_U3_PHYD); +} + +static void phy_v1_banks_init(struct mtk_tphy *tphy, + struct mtk_phy_instance *instance) +{ + struct u3phy_banks *u3_banks = &instance->u3_banks; + + switch (instance->type) { + case PHY_TYPE_PCIE: + u3_banks->spllc = tphy->sif_base + SSUSB_SIFSLV_V1_SPLLC; + u3_banks->chip = tphy->sif_base + SSUSB_SIFSLV_V1_CHIP; + u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V1_U3PHYD; + u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V1_U3PHYA; + break; + default: + return; + } +} + +static int mtk_phy_init(struct phy *phy) +{ + struct mtk_tphy *tphy = dev_get_priv(phy->dev); + struct mtk_phy_instance *instance = tphy->phys[phy->id]; + int ret; + + /* we may use a fixed-clock here */ + ret = clk_enable(&instance->ref_clk); + if (ret && ret != -ENOSYS) + return ret; + + switch (instance->type) { + case PHY_TYPE_PCIE: + pcie_phy_instance_init(tphy, instance); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int mtk_phy_power_on(struct phy *phy) +{ + struct mtk_tphy *tphy = dev_get_priv(phy->dev); + struct mtk_phy_instance *instance = tphy->phys[phy->id]; + + pcie_phy_instance_power_on(tphy, instance); + + return 0; +} + +static int mtk_phy_power_off(struct phy *phy) +{ + struct mtk_tphy *tphy = dev_get_priv(phy->dev); + struct mtk_phy_instance *instance = tphy->phys[phy->id]; + + pcie_phy_instance_power_off(tphy, instance); + + return 0; +} + +static int mtk_phy_exit(struct phy *phy) +{ + struct mtk_tphy *tphy = dev_get_priv(phy->dev); + struct mtk_phy_instance *instance = tphy->phys[phy->id]; + + clk_disable(&instance->ref_clk); + + return 0; +} + +static int mtk_phy_xlate(struct phy *phy, + struct ofnode_phandle_args *args) +{ + struct mtk_tphy *tphy = dev_get_priv(phy->dev); + struct mtk_phy_instance *instance = NULL; + const struct device_node *phy_np = ofnode_to_np(args->node); + u32 index; + + if (!phy_np) { + dev_err(phy->dev, "null pointer phy node\n"); + return -EINVAL; + } + + if (args->args_count < 1) { + dev_err(phy->dev, "invalid number of cells in 'phy' property\n"); + return -EINVAL; + } + + for (index = 0; index < tphy->nphys; index++) + if (phy_np == tphy->phys[index]->np) { + instance = tphy->phys[index]; + break; + } + + if (!instance) { + dev_err(phy->dev, "failed to find appropriate phy\n"); + return -EINVAL; + } + + phy->id = index; + instance->type = args->args[1]; + if (!(instance->type == PHY_TYPE_USB2 || + instance->type == PHY_TYPE_USB3 || + instance->type == PHY_TYPE_PCIE || + instance->type == PHY_TYPE_SATA)) { + dev_err(phy->dev, "unsupported device type\n"); + return -EINVAL; + } + + phy_v1_banks_init(tphy, instance); + + return 0; +} + +static const struct phy_ops mtk_tphy_ops = { + .init = mtk_phy_init, + .exit = mtk_phy_exit, + .power_on = mtk_phy_power_on, + .power_off = mtk_phy_power_off, + .of_xlate = mtk_phy_xlate, +}; + +static int mtk_tphy_probe(struct udevice *dev) +{ + struct mtk_tphy *tphy = dev_get_priv(dev); + ofnode subnode; + int index = 0; + + dev_for_each_subnode(subnode, dev) + tphy->nphys++; + + tphy->phys = devm_kcalloc(dev, tphy->nphys, sizeof(*tphy->phys), + GFP_KERNEL); + if (!tphy->phys) + return -ENOMEM; + + tphy->sif_base = dev_read_addr_ptr(dev); + if (!tphy->sif_base) + return -ENOENT; + + dev_for_each_subnode(subnode, dev) { + struct mtk_phy_instance *instance; + fdt_addr_t addr; + int err; + + instance = devm_kzalloc(dev, sizeof(*instance), GFP_KERNEL); + if (!instance) + return -ENOMEM; + + addr = ofnode_get_addr(subnode); + if (addr == FDT_ADDR_T_NONE) + return -ENOMEM; + + instance->port_base = map_sysmem(addr, 0); + instance->index = index; + instance->np = ofnode_to_np(subnode); + tphy->phys[index] = instance; + index++; + + err = clk_get_by_index_nodev(subnode, 0, &instance->ref_clk); + if (err) + return err; + } + + return 0; +} + +static const struct udevice_id mtk_tphy_id_table[] = { + { .compatible = "mediatek,generic-tphy-v1", }, + { } +}; + +U_BOOT_DRIVER(mtk_tphy) = { + .name = "mtk-tphy", + .id = UCLASS_PHY, + .of_match = mtk_tphy_id_table, + .ops = &mtk_tphy_ops, + .probe = mtk_tphy_probe, + .priv_auto_alloc_size = sizeof(struct mtk_tphy), +};