From: Ozgur Can Leonard Date: Tue, 19 Mar 2019 07:04:27 +0000 (+0300) Subject: ramips: Xiaomi MIR3G: detect board name from DTS X-Git-Tag: v19.07.0-rc1~993 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=201d3d1a82e62bd139950571fc30f6b49d395378;p=oweals%2Fopenwrt.git ramips: Xiaomi MIR3G: detect board name from DTS - Former "mir3g" board name becomes "xiaomi,mir3g". - Reorder some entries to maintain alphabetical order. - Change DTS so status LEDs (yellow/red/blue) mimic Xiaomi stock firmware: (Section Indicator) |Yellow: Update (LED flickering), the launch of the system (steady light); |Blue: during normal operation (steady light); |Red: Safe mode (display flicker), system failure (steady light); Signed-off-by: Ozgur Can Leonard [Added link to similar Router 3 model] Signed-off-by: Christian Lamparter --- diff --git a/package/boot/uboot-envtools/files/ramips b/package/boot/uboot-envtools/files/ramips index b70f62656d..589e602f4c 100644 --- a/package/boot/uboot-envtools/files/ramips +++ b/package/boot/uboot-envtools/files/ramips @@ -32,7 +32,7 @@ zbt-wg2626) ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x10000" ;; xiaomi,mir3p|\ -mir3g) +xiaomi,mir3g) ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x20000" ;; esac diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 69b95ee540..b42e04f223 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -236,17 +236,6 @@ mikrotik,rbm11g) miniembplug) set_wifi_led "$boardname:red:wlan" ;; -xiaomi,mir3p) - ucidef_set_led_switch "wan-amber" "WAN (amber)" "$boardname:amber:wan" "switch0" "0x10" "0x08" - ucidef_set_led_switch "lan1-amber" "LAN1 (amber)" "$boardname:amber:lan1" "switch0" "0x02" "0x08" - ucidef_set_led_switch "lan2-amber" "LAN2 (amber)" "$boardname:amber:lan2" "switch0" "0x04" "0x08" - ucidef_set_led_switch "lan3-amber" "LAN3 (amber)" "$boardname:amber:lan3" "switch0" "0x08" "0x08" - ;; -mir3g) - ucidef_set_led_switch "wan-amber" "WAN (amber)" "$boardname:amber:wan" "switch0" "0x02" "0x08" - ucidef_set_led_switch "lan1-amber" "LAN1 (amber)" "$boardname:amber:lan1" "switch0" "0x08" "0x08" - ucidef_set_led_switch "lan2-amber" "LAN2 (amber)" "$boardname:amber:lan2" "switch0" "0x04" "0x08" - ;; mlw221|\ mlwg2) set_wifi_led "$boardname:blue:wifi" @@ -421,6 +410,17 @@ wrh-300cr) set_wifi_led "$boardname:green:wlan" ucidef_set_led_netdev "lan" "lan" "$boardname:green:ethernet" "eth0" ;; +xiaomi,mir3g) + ucidef_set_led_switch "wan-amber" "WAN (amber)" "$boardname:amber:wan" "switch0" "0x02" "0x08" + ucidef_set_led_switch "lan1-amber" "LAN1 (amber)" "$boardname:amber:lan1" "switch0" "0x08" "0x08" + ucidef_set_led_switch "lan2-amber" "LAN2 (amber)" "$boardname:amber:lan2" "switch0" "0x04" "0x08" + ;; +xiaomi,mir3p) + ucidef_set_led_switch "wan-amber" "WAN (amber)" "$boardname:amber:wan" "switch0" "0x10" "0x08" + ucidef_set_led_switch "lan1-amber" "LAN1 (amber)" "$boardname:amber:lan1" "switch0" "0x02" "0x08" + ucidef_set_led_switch "lan2-amber" "LAN2 (amber)" "$boardname:amber:lan2" "switch0" "0x04" "0x08" + ucidef_set_led_switch "lan3-amber" "LAN3 (amber)" "$boardname:amber:lan3" "switch0" "0x08" "0x08" + ;; xzwifi,creativebox-v1) ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x10" ;; diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 20a50cc6de..bf71aef5ec 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -179,10 +179,6 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "1:lan:2" "2:lan:1" "3:lan:3" "4:lan" "0:wan" "6@eth0" ;; - mir3g) - ucidef_add_switch "switch0" \ - "2:lan:2" "3:lan:1" "1:wan" "6t@eth0" - ;; psg1218b) ucidef_add_switch "switch0" \ "0:lan:3" "1:lan:2" "2:lan:1" "3:wan" "6@eth0" @@ -437,6 +433,10 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "4:lan" "0:wan" "6@eth0" ;; + xiaomi,mir3g) + ucidef_add_switch "switch0" \ + "2:lan:2" "3:lan:1" "1:wan" "6t@eth0" + ;; xiaomi,mir3p) ucidef_add_switch "switch0" \ "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6@eth0" @@ -568,10 +568,6 @@ ramips_setup_macs() lan_mac=$(mtd_get_mac_binary factory_info 13) wan_mac=$(macaddr_add "$lan_mac" 1) ;; - mir3g|\ - xiaomi,mir3p) - lan_mac=$(mtd_get_mac_binary Factory 0xe006) - ;; miwifi-mini) wan_mac=$(cat /sys/class/net/eth0/address) lan_mac=$(macaddr_setbit_la "$wan_mac") @@ -653,6 +649,10 @@ ramips_setup_macs() wlr-6000) wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 32772)" 2) ;; + xiaomi,mir3g|\ + xiaomi,mir3p) + lan_mac=$(mtd_get_mac_binary Factory 0xe006) + ;; *) lan_mac=$(cat /sys/class/net/eth0/address) wan_mac=$(macaddr_add "$lan_mac" 1) diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index db93710ba7..093303892c 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -277,9 +277,6 @@ ramips_board_detect() { *"Mercury MAC1200R v2") name="mac1200rv2" ;; - *"Mi Router 3G") - name="mir3g" - ;; *"MicroWRT") name="microwrt" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 67b0f3e7f4..7372a37939 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -37,11 +37,11 @@ platform_do_upgrade() { case "$board" in hc5962|\ - mir3g|\ r6220|\ netgear,r6350|\ ubnt-erx|\ ubnt-erx-sfp|\ + xiaomi,mir3g|\ xiaomi,mir3p) nand_do_upgrade "$ARGV" ;; diff --git a/target/linux/ramips/dts/MIR3G.dts b/target/linux/ramips/dts/MIR3G.dts index 3af2c752fd..b0b63f8085 100644 --- a/target/linux/ramips/dts/MIR3G.dts +++ b/target/linux/ramips/dts/MIR3G.dts @@ -10,10 +10,10 @@ model = "Xiaomi Mi Router 3G"; aliases { - led-boot = &led_status_blue; - led-failsafe = &led_status_blue; + led-boot = &led_status_yellow; + led-failsafe = &led_status_red; led-running = &led_status_blue; - led-upgrade = &led_status_blue; + led-upgrade = &led_status_yellow; }; memory@0 { @@ -28,7 +28,7 @@ leds { compatible = "gpio-leds"; - status_red { + led_status_red: status_red { label = "mir3g:red:status"; gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; }; @@ -38,7 +38,7 @@ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; }; - status_yellow { + led_status_yellow: status_yellow { label = "mir3g:yellow:status"; gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; }; @@ -59,7 +59,7 @@ }; }; - keys { + button { compatible = "gpio-keys-polled"; poll-interval = <20>; @@ -70,7 +70,7 @@ }; }; - reg_usb_vbus: reg_usb_vbus { + reg_usb_vbus: regulator { compatible = "regulator-fixed"; regulator-name = "usb_vbus"; regulator-min-microvolt = <5000000>; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 8b0b28a941..1f514a6d04 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -251,7 +251,7 @@ define Device/xiaomi_mir3p endef TARGET_DEVICES += xiaomi_mir3p -define Device/mir3g +define Device/xiaomi_mir3g DTS := MIR3G BLOCKSIZE := 128k PAGESIZE := 2048 @@ -264,11 +264,12 @@ define Device/mir3g IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata DEVICE_TITLE := Xiaomi Mi Router 3G SUPPORTED_DEVICES += R3G + SUPPORTED_DEVICES += mir3g DEVICE_PACKAGES := \ kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic \ uboot-envtools endef -TARGET_DEVICES += mir3g +TARGET_DEVICES += xiaomi_mir3g define Device/mt7621 DTS := MT7621