From: Felix Fietkau Date: Tue, 17 Mar 2009 19:10:36 +0000 (+0000) Subject: s3c24xx: unbreak openmoko merge patch (mmc changes) X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=1ff94303f522f54a7a89c1f14dc29b3f19a08e0c;p=librecmc%2Flibrecmc.git s3c24xx: unbreak openmoko merge patch (mmc changes) SVN-Revision: 14927 --- diff --git a/target/linux/s3c24xx/patches-2.6.28/001-merge-openmoko.patch b/target/linux/s3c24xx/patches-2.6.28/001-merge-openmoko.patch index 79763135d8..d328602340 100644 --- a/target/linux/s3c24xx/patches-2.6.28/001-merge-openmoko.patch +++ b/target/linux/s3c24xx/patches-2.6.28/001-merge-openmoko.patch @@ -7,7 +7,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c -@@ -69,12 +69,12 @@ void __init vic_init(void __iomem *base, +@@ -69,12 +69,12 @@ /* * Make sure we clear all existing interrupts */ @@ -23,7 +23,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } for (i = 0; i < 16; i++) { -@@ -82,7 +82,7 @@ void __init vic_init(void __iomem *base, +@@ -82,7 +82,7 @@ writel(VIC_VECT_CNTL_ENABLE | i, reg); } @@ -6657,7 +6657,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +CONFIG_HAS_DMA=y --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig -@@ -498,6 +498,13 @@ config ARCH_S3C2410 +@@ -498,6 +498,13 @@ BAST (), the IPAQ 1940 or the Samsung SMDK2410 development board (and derivatives). @@ -6671,7 +6671,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 config ARCH_SHARK bool "Shark" select ISA -@@ -590,6 +597,7 @@ source "arch/arm/mach-orion5x/Kconfig" +@@ -590,6 +597,7 @@ source "arch/arm/mach-kirkwood/Kconfig" source "arch/arm/plat-s3c24xx/Kconfig" @@ -6679,7 +6679,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 source "arch/arm/plat-s3c/Kconfig" if ARCH_S3C2410 -@@ -601,6 +609,11 @@ source "arch/arm/mach-s3c2442/Kconfig" +@@ -601,6 +609,11 @@ source "arch/arm/mach-s3c2443/Kconfig" endif @@ -6691,7 +6691,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 source "arch/arm/mach-lh7a40x/Kconfig" source "arch/arm/mach-imx/Kconfig" -@@ -1256,6 +1269,8 @@ source "drivers/usb/Kconfig" +@@ -1256,6 +1269,8 @@ source "drivers/uwb/Kconfig" @@ -6700,7 +6700,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 source "drivers/mmc/Kconfig" source "drivers/memstick/Kconfig" -@@ -1268,6 +1283,8 @@ source "drivers/rtc/Kconfig" +@@ -1268,6 +1283,8 @@ source "drivers/dma/Kconfig" @@ -6711,7 +6711,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 source "drivers/auxdisplay/Kconfig" --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S -@@ -106,6 +106,8 @@ SECTIONS +@@ -106,6 +106,8 @@ *(.got) /* Global offset table */ } @@ -7757,7 +7757,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 + resume_dependency, int uart_index); --- a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h +++ b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h -@@ -21,7 +21,15 @@ struct s3c2410_spigpio_info { +@@ -21,7 +21,15 @@ int num_chipselect; int bus_num; @@ -7776,7 +7776,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 --- a/arch/arm/mach-s3c2410/include/mach/spi.h +++ b/arch/arm/mach-s3c2410/include/mach/spi.h -@@ -22,5 +22,12 @@ struct s3c2410_spi_info { +@@ -22,5 +22,12 @@ void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol); }; @@ -7917,7 +7917,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 -#endif /* __ASM_ARCH_VMALLOC_H */ --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig -@@ -9,6 +9,7 @@ config CPU_S3C2410 +@@ -9,6 +9,7 @@ depends on ARCH_S3C2410 select S3C2410_CLOCK select S3C2410_GPIO @@ -7925,7 +7925,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 select CPU_LLSERIAL_S3C2410 select S3C2410_PM if PM help -@@ -32,11 +33,6 @@ config S3C2410_GPIO +@@ -32,11 +33,6 @@ help GPIO code for S3C2410 and similar processors @@ -7937,7 +7937,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 config SIMTEC_NOR bool help -@@ -49,6 +45,12 @@ config MACH_BAST_IDE +@@ -49,6 +45,12 @@ Internal node for machines with an BAST style IDE interface @@ -7950,7 +7950,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 menu "S3C2410 Machines" config ARCH_SMDK2410 -@@ -84,6 +86,7 @@ config ARCH_BAST +@@ -84,6 +86,7 @@ select PM_SIMTEC if PM select SIMTEC_NOR select MACH_BAST_IDE @@ -7958,7 +7958,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 select ISA help Say Y here if you are using the Simtec Electronics EB2410ITX -@@ -121,6 +124,7 @@ config MACH_TCT_HAMMER +@@ -121,6 +124,7 @@ config MACH_VR1000 bool "Thorcom VR1000" select PM_SIMTEC if PM @@ -7966,7 +7966,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 select SIMTEC_NOR select MACH_BAST_IDE select CPU_S3C2410 -@@ -130,7 +134,16 @@ config MACH_VR1000 +@@ -130,7 +134,16 @@ config MACH_QT2410 bool "QT2410" select CPU_S3C2410 @@ -7993,7 +7993,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include #include -@@ -150,7 +151,7 @@ static struct platform_device *amlm5900_ +@@ -150,7 +151,7 @@ #endif &s3c_device_adc, &s3c_device_wdt, @@ -8002,7 +8002,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_usb, &s3c_device_rtc, &s3c_device_usbgadget, -@@ -233,6 +234,7 @@ static void __init amlm5900_init(void) +@@ -233,6 +234,7 @@ #ifdef CONFIG_FB_S3C2410 s3c24xx_fb_set_platdata(&amlm5900_fb_info); #endif @@ -8023,7 +8023,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include #include -@@ -406,7 +406,7 @@ static struct platform_device bast_sio = +@@ -406,7 +406,7 @@ * standard 100KHz i2c bus frequency */ @@ -8032,7 +8032,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 .flags = 0, .slave_addr = 0x10, .bus_freq = 100*1000, -@@ -553,7 +553,7 @@ static struct platform_device *bast_devi +@@ -553,7 +553,7 @@ &s3c_device_usb, &s3c_device_lcd, &s3c_device_wdt, @@ -8041,7 +8041,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_rtc, &s3c_device_nand, &bast_device_dm9k, -@@ -588,7 +588,8 @@ static void __init bast_map_io(void) +@@ -588,7 +588,8 @@ s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks)); s3c_device_nand.dev.platform_data = &bast_nand_info; @@ -8857,7 +8857,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include static struct map_desc h1940_iodesc[] __initdata = { -@@ -129,6 +131,11 @@ static struct s3c2410_udc_mach_info h194 +@@ -129,6 +131,11 @@ .vbus_pin_inverted = 1, }; @@ -8869,7 +8869,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /** * Set lcd on or off -@@ -183,9 +190,10 @@ static struct platform_device *h1940_dev +@@ -183,9 +190,10 @@ &s3c_device_usb, &s3c_device_lcd, &s3c_device_wdt, @@ -8881,7 +8881,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_leds, &s3c_device_bluetooth, }; -@@ -201,7 +209,7 @@ static void __init h1940_map_io(void) +@@ -201,7 +209,7 @@ #ifdef CONFIG_PM_H1940 memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024); #endif @@ -8890,7 +8890,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } static void __init h1940_init_irq(void) -@@ -214,7 +222,9 @@ static void __init h1940_init(void) +@@ -214,7 +222,9 @@ u32 tmp; s3c24xx_fb_set_platdata(&h1940_fb_info); @@ -8900,7 +8900,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* Turn off suspend on both USB ports, and switch the * selectable USB port to USB device mode. */ -@@ -223,10 +233,9 @@ static void __init h1940_init(void) +@@ -223,10 +233,9 @@ S3C2410_MISCCR_USBSUSPND0 | S3C2410_MISCCR_USBSUSPND1, 0x0); @@ -8933,7 +8933,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static struct map_desc n30_iodesc[] __initdata = { /* nothing here yet */ -@@ -320,7 +320,7 @@ static struct s3c2410fb_mach_info n30_fb +@@ -320,7 +320,7 @@ static struct platform_device *n30_devices[] __initdata = { &s3c_device_lcd, &s3c_device_wdt, @@ -8942,7 +8942,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_iis, &s3c_device_usb, &s3c_device_usbgadget, -@@ -332,7 +332,7 @@ static struct platform_device *n30_devic +@@ -332,7 +332,7 @@ static struct platform_device *n35_devices[] __initdata = { &s3c_device_lcd, &s3c_device_wdt, @@ -8951,7 +8951,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_iis, &s3c_device_usbgadget, &n35_button_device, -@@ -501,7 +501,7 @@ static void __init n30_init_irq(void) +@@ -501,7 +501,7 @@ static void __init n30_init(void) { s3c24xx_fb_set_platdata(&n30_fb_info); @@ -8970,7 +8970,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include static struct map_desc otom11_iodesc[] __initdata = { -@@ -94,7 +95,7 @@ static struct platform_device *otom11_de +@@ -94,7 +95,7 @@ &s3c_device_usb, &s3c_device_lcd, &s3c_device_wdt, @@ -8979,7 +8979,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_iis, &s3c_device_rtc, &otom_device_nor, -@@ -109,6 +110,7 @@ static void __init otom11_map_io(void) +@@ -109,6 +110,7 @@ static void __init otom11_init(void) { @@ -9011,7 +9011,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include #include -@@ -213,7 +214,7 @@ static struct platform_device qt2410_led +@@ -213,7 +214,7 @@ /* SPI */ @@ -9020,7 +9020,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 { switch (cs) { case BITBANG_CS_ACTIVE: -@@ -247,7 +248,7 @@ static struct platform_device *qt2410_de +@@ -247,7 +248,7 @@ &s3c_device_usb, &s3c_device_lcd, &s3c_device_wdt, @@ -9029,7 +9029,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_iis, &s3c_device_sdi, &s3c_device_usbgadget, -@@ -320,6 +321,24 @@ static int __init qt2410_tft_setup(char +@@ -320,6 +321,24 @@ __setup("tft=", qt2410_tft_setup); @@ -9054,7 +9054,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static void __init qt2410_map_io(void) { s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc)); -@@ -349,11 +368,12 @@ static void __init qt2410_machine_init(v +@@ -349,11 +368,12 @@ s3c2410_gpio_setpin(S3C2410_GPB0, 1); s3c24xx_udc_set_platdata(&qt2410_udc_cfg); @@ -9078,7 +9078,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include #include -@@ -89,7 +90,7 @@ static struct platform_device *smdk2410_ +@@ -89,7 +90,7 @@ &s3c_device_usb, &s3c_device_lcd, &s3c_device_wdt, @@ -9087,7 +9087,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_iis, }; -@@ -102,6 +103,7 @@ static void __init smdk2410_map_io(void) +@@ -102,6 +103,7 @@ static void __init smdk2410_init(void) { @@ -9105,7 +9105,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include #include -@@ -127,7 +128,7 @@ static struct s3c2410_uartcfg tct_hammer +@@ -127,7 +128,7 @@ static struct platform_device *tct_hammer_devices[] __initdata = { &s3c_device_adc, &s3c_device_wdt, @@ -9114,7 +9114,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_usb, &s3c_device_rtc, &s3c_device_usbgadget, -@@ -146,6 +147,7 @@ static void __init tct_hammer_map_io(voi +@@ -146,6 +147,7 @@ static void __init tct_hammer_init(void) { @@ -9132,7 +9132,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include "usb-simtec.h" #include "nor-simtec.h" -@@ -334,7 +335,7 @@ static struct platform_device *vr1000_de +@@ -334,7 +335,7 @@ &s3c_device_usb, &s3c_device_lcd, &s3c_device_wdt, @@ -9141,7 +9141,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_adc, &serial_device, &vr1000_dm9k0, -@@ -384,6 +385,7 @@ static void __init vr1000_map_io(void) +@@ -384,6 +385,7 @@ static void __init vr1000_init(void) { @@ -9151,7 +9151,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 i2c_register_board_info(0, vr1000_i2c_devs, --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile -@@ -15,7 +15,8 @@ obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o +@@ -15,7 +15,8 @@ obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o obj-$(CONFIG_S3C2410_GPIO) += gpio.o @@ -9161,7 +9161,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 # Machine support -@@ -38,3 +39,5 @@ obj-$(CONFIG_SIMTEC_NOR) += nor-simtec.o +@@ -38,3 +39,5 @@ # machine additions obj-$(CONFIG_MACH_BAST_IDE) += bast-ide.o @@ -9512,7 +9512,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* Initial IO mappings */ -@@ -59,25 +63,28 @@ void __init s3c2410_init_uarts(struct s3 +@@ -59,25 +63,28 @@ * machine specific initialisation. */ @@ -9547,7 +9547,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 tmp = __raw_readl(S3C2410_CLKDIVN); -@@ -95,7 +102,13 @@ void __init s3c2410_init_clocks(int xtal +@@ -95,7 +102,13 @@ * console to use them */ @@ -9564,7 +9564,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 --- a/arch/arm/mach-s3c2412/clock.c +++ b/arch/arm/mach-s3c2412/clock.c -@@ -93,12 +93,6 @@ static int s3c2412_upll_enable(struct cl +@@ -93,12 +93,6 @@ /* clock selections */ @@ -9577,7 +9577,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static struct clk clk_erefclk = { .name = "erefclk", .id = -1, -@@ -773,5 +767,6 @@ int __init s3c2412_baseclk_add(void) +@@ -773,5 +767,6 @@ s3c2412_clkcon_enable(clkp, 0); } @@ -9625,7 +9625,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static struct map_desc jive_iodesc[] __initdata = { }; -@@ -450,14 +451,14 @@ static struct spi_board_info __initdata +@@ -450,14 +451,14 @@ /* I2C bus and device configuration. */ @@ -9642,7 +9642,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 [0] = { I2C_BOARD_INFO("lis302dl", 0x1c), .irq = IRQ_EINT14, -@@ -470,7 +471,7 @@ static struct platform_device *jive_devi +@@ -470,7 +471,7 @@ &s3c_device_usb, &s3c_device_rtc, &s3c_device_wdt, @@ -9651,7 +9651,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_lcd, &jive_device_lcdspi, &jive_device_wm8750, -@@ -492,7 +493,7 @@ static int jive_pm_suspend(struct sys_de +@@ -492,7 +493,7 @@ * correct address to resume from. */ __raw_writel(0x2BED, S3C2412_INFORM0); @@ -9660,7 +9660,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 return 0; } -@@ -628,7 +629,7 @@ static void __init jive_machine_init(voi +@@ -628,7 +629,7 @@ /* initialise the power management now we've setup everything. */ @@ -9669,7 +9669,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 s3c_device_nand.dev.platform_data = &jive_nand_info; -@@ -663,7 +664,7 @@ static void __init jive_machine_init(voi +@@ -663,7 +664,7 @@ spi_register_board_info(jive_spi_devs, ARRAY_SIZE(jive_spi_devs)); @@ -9690,7 +9690,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include #include -@@ -105,7 +106,7 @@ static struct platform_device *smdk2413_ +@@ -105,7 +106,7 @@ &s3c_device_usb, //&s3c_device_lcd, &s3c_device_wdt, @@ -9699,7 +9699,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_iis, &s3c_device_usbgadget, }; -@@ -142,6 +143,7 @@ static void __init smdk2413_machine_init +@@ -142,6 +143,7 @@ s3c24xx_udc_set_platdata(&smdk2413_udc_cfg); @@ -9719,7 +9719,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include #include -@@ -122,7 +123,7 @@ static struct s3c2410_platform_nand vstm +@@ -122,7 +123,7 @@ static struct platform_device *vstms_devices[] __initdata = { &s3c_device_usb, &s3c_device_wdt, @@ -9728,7 +9728,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_iis, &s3c_device_rtc, &s3c_device_nand, -@@ -151,6 +152,7 @@ static void __init vstms_map_io(void) +@@ -151,6 +152,7 @@ static void __init vstms_init(void) { @@ -9738,7 +9738,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 --- a/arch/arm/mach-s3c2412/pm.c +++ b/arch/arm/mach-s3c2412/pm.c -@@ -85,7 +85,7 @@ static struct sleep_save s3c2412_sleep[] +@@ -85,7 +85,7 @@ static int s3c2412_pm_suspend(struct sys_device *dev, pm_message_t state) { @@ -9747,7 +9747,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 return 0; } -@@ -98,7 +98,7 @@ static int s3c2412_pm_resume(struct sys_ +@@ -98,7 +98,7 @@ tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE; __raw_writel(tmp, S3C2412_PWRCFG); @@ -9791,7 +9791,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #ifndef CONFIG_CPU_S3C2412_ONLY void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO; -@@ -136,7 +140,7 @@ static void s3c2412_hard_reset(void) +@@ -136,7 +140,7 @@ * machine specific initialisation. */ @@ -9800,7 +9800,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 { /* move base of IO */ -@@ -153,20 +157,25 @@ void __init s3c2412_map_io(struct map_de +@@ -153,20 +157,25 @@ /* register our io-tables */ iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc)); @@ -9829,7 +9829,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 clk_mpll.rate = fclk; -@@ -183,11 +192,17 @@ void __init s3c2412_init_clocks(int xtal +@@ -183,11 +192,17 @@ printk("S3C2412: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n", print_mhz(fclk), print_mhz(hclk), print_mhz(pclk)); @@ -9848,7 +9848,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 s3c2412_baseclk_add(); } -@@ -216,5 +231,8 @@ int __init s3c2412_init(void) +@@ -216,5 +231,8 @@ { printk("S3C2412: Initialising architecture\n"); @@ -16112,7 +16112,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +#endif /* _LINUX_FIQ_C_ISR_H */ --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig -@@ -22,12 +22,20 @@ config S3C2440_DMA +@@ -22,12 +22,20 @@ help Support for S3C2440 specific DMA code5A @@ -16133,7 +16133,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 select PM_SIMTEC if PM select HAVE_PATA_PLATFORM help -@@ -37,6 +45,7 @@ config MACH_ANUBIS +@@ -37,6 +45,7 @@ config MACH_OSIRIS bool "Simtec IM2440D20 (OSIRIS) module" select CPU_S3C2440 @@ -16141,7 +16141,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 select PM_SIMTEC if PM help Say Y here if you are using the Simtec IM2440D20 module, also -@@ -74,5 +83,30 @@ config MACH_AT2440EVB +@@ -74,5 +83,30 @@ help Say Y here if you are using the AT2440EVB development board @@ -16184,7 +16184,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include #include -@@ -404,7 +405,7 @@ static struct platform_device *anubis_de +@@ -404,7 +405,7 @@ &s3c_device_usb, &s3c_device_wdt, &s3c_device_adc, @@ -16193,7 +16193,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_rtc, &s3c_device_nand, &anubis_device_ide0, -@@ -468,6 +469,7 @@ static void __init anubis_map_io(void) +@@ -468,6 +469,7 @@ static void __init anubis_init(void) { @@ -16213,7 +16213,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include #include -@@ -166,7 +167,7 @@ static struct platform_device *at2440evb +@@ -166,7 +167,7 @@ &s3c_device_usb, &s3c_device_wdt, &s3c_device_adc, @@ -16222,7 +16222,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_rtc, &s3c_device_nand, &at2440evb_device_eth, -@@ -183,6 +184,7 @@ static void __init at2440evb_map_io(void +@@ -183,6 +184,7 @@ static void __init at2440evb_init(void) { @@ -18021,7 +18021,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include #include -@@ -107,7 +108,7 @@ static struct platform_device *nexcoder_ +@@ -107,7 +108,7 @@ &s3c_device_usb, &s3c_device_lcd, &s3c_device_wdt, @@ -18030,7 +18030,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_iis, &s3c_device_rtc, &s3c_device_camif, -@@ -142,6 +143,7 @@ static void __init nexcoder_map_io(void) +@@ -142,6 +143,7 @@ static void __init nexcoder_init(void) { @@ -18050,7 +18050,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include #include -@@ -335,7 +336,7 @@ static struct i2c_board_info osiris_i2c_ +@@ -335,7 +336,7 @@ /* Standard Osiris devices */ static struct platform_device *osiris_devices[] __initdata = { @@ -18059,7 +18059,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_wdt, &s3c_device_nand, &osiris_pcmcia, -@@ -398,6 +399,8 @@ static void __init osiris_init(void) +@@ -398,6 +399,8 @@ sysdev_class_register(&osiris_pm_sysclass); sysdev_register(&osiris_pm_sysdev); @@ -18079,7 +18079,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include #include -@@ -179,7 +179,7 @@ static struct platform_device *rx3715_de +@@ -179,7 +179,7 @@ &s3c_device_usb, &s3c_device_lcd, &s3c_device_wdt, @@ -18088,7 +18088,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_iis, &s3c_device_nand, }; -@@ -203,7 +203,7 @@ static void __init rx3715_init_machine(v +@@ -203,7 +203,7 @@ #ifdef CONFIG_PM_H1940 memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024); #endif @@ -18107,7 +18107,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include #include -@@ -152,7 +153,7 @@ static struct platform_device *smdk2440_ +@@ -152,7 +153,7 @@ &s3c_device_usb, &s3c_device_lcd, &s3c_device_wdt, @@ -18116,7 +18116,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 &s3c_device_iis, }; -@@ -166,6 +167,7 @@ static void __init smdk2440_map_io(void) +@@ -166,6 +167,7 @@ static void __init smdk2440_machine_init(void) { s3c24xx_fb_set_platdata(&smdk2440_fb_info); @@ -18126,7 +18126,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 smdk_machine_init(); --- a/arch/arm/mach-s3c2440/Makefile +++ b/arch/arm/mach-s3c2440/Makefile -@@ -13,6 +13,7 @@ obj-$(CONFIG_CPU_S3C2440) += s3c2440.o d +@@ -13,6 +13,7 @@ obj-$(CONFIG_CPU_S3C2440) += irq.o obj-$(CONFIG_CPU_S3C2440) += clock.o obj-$(CONFIG_S3C2440_DMA) += dma.o @@ -18134,7 +18134,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 # Machine support -@@ -22,3 +23,6 @@ obj-$(CONFIG_MACH_RX3715) += mach-rx3715 +@@ -22,3 +23,6 @@ obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o @@ -18143,7 +18143,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 + --- a/arch/arm/mach-s3c2440/s3c2440.c +++ b/arch/arm/mach-s3c2440/s3c2440.c -@@ -46,6 +46,9 @@ int __init s3c2440_init(void) +@@ -46,6 +46,9 @@ s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT; s3c_device_wdt.resource[1].end = IRQ_S3C2440_WDT; @@ -18178,7 +18178,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static struct sys_device s3c2442_sysdev = { .cls = &s3c2442_sysclass, -@@ -30,5 +31,8 @@ int __init s3c2442_init(void) +@@ -30,5 +31,8 @@ { printk("S3C2442: Initialising architecture\n"); @@ -18198,7 +18198,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include #include #include -@@ -145,12 +147,6 @@ static unsigned long s3c2443_roundrate_c +@@ -145,12 +147,6 @@ /* clock selections */ @@ -18211,7 +18211,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static struct clk clk_mpllref = { .name = "mpllref", .parent = &clk_xtal, -@@ -165,14 +161,6 @@ static struct clk clk_mpll = { +@@ -165,14 +161,6 @@ }; #endif @@ -18226,7 +18226,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static struct clk clk_i2s_ext = { .name = "i2s-ext", .id = -1, -@@ -1011,22 +999,20 @@ static struct clk *clks[] __initdata = { +@@ -1011,22 +999,20 @@ &clk_prediv, }; @@ -18255,7 +18255,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 pll = s3c2443_get_mpll(mpllcon, xtal); clk_msysclk.rate = pll; -@@ -1036,13 +1022,29 @@ void __init s3c2443_init_clocks(int xtal +@@ -1036,13 +1022,29 @@ hclk /= s3c2443_get_hdiv(clkdiv0); pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1); @@ -18286,7 +18286,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 s3c2443_clk_initparents(); for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) { -@@ -1056,7 +1058,7 @@ void __init s3c2443_init_clocks(int xtal +@@ -1056,7 +1058,7 @@ } clk_epll.rate = s3c2443_get_epll(epllcon, xtal); @@ -18295,7 +18295,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 clk_usb_bus.parent = &clk_usb_bus_host; /* ensure usb bus clock is within correct rate of 48MHz */ -@@ -1105,4 +1107,6 @@ void __init s3c2443_init_clocks(int xtal +@@ -1105,4 +1107,6 @@ (clkp->enable)(clkp, 0); } @@ -18321,7 +18321,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 [0] = (x) | DMA_CH_VALID, \ --- a/arch/arm/mach-s3c2443/Kconfig +++ b/arch/arm/mach-s3c2443/Kconfig -@@ -24,6 +24,7 @@ config MACH_SMDK2443 +@@ -24,6 +24,7 @@ bool "SMDK2443" select CPU_S3C2443 select MACH_SMDK @@ -18339,7 +18339,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include #include -@@ -103,8 +104,8 @@ static struct s3c2410_uartcfg smdk2443_u +@@ -103,8 +104,8 @@ static struct platform_device *smdk2443_devices[] __initdata = { &s3c_device_wdt, @@ -18350,7 +18350,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 }; static void __init smdk2443_map_io(void) -@@ -116,6 +117,7 @@ static void __init smdk2443_map_io(void) +@@ -116,6 +117,7 @@ static void __init smdk2443_machine_init(void) { @@ -18360,7 +18360,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } --- a/arch/arm/mach-s3c2443/s3c2443.c +++ b/arch/arm/mach-s3c2443/s3c2443.c -@@ -81,10 +81,9 @@ void __init s3c2443_init_uarts(struct s3 +@@ -81,10 +81,9 @@ * machine specific initialisation. */ @@ -21366,7 +21366,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +} --- a/arch/arm/Makefile +++ b/arch/arm/Makefile -@@ -121,7 +121,10 @@ endif +@@ -121,7 +121,10 @@ machine-$(CONFIG_ARCH_OMAP3) := omap2 plat-$(CONFIG_ARCH_OMAP) := omap machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443 @@ -21379,7 +21379,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 machine-$(CONFIG_ARCH_IMX) := imx --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig -@@ -183,14 +183,14 @@ config CPU_ARM926T +@@ -183,14 +183,14 @@ depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || \ MACH_VERSATILE_AB || ARCH_OMAP730 || \ ARCH_OMAP16XX || MACH_REALVIEW_EB || \ @@ -21396,7 +21396,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || \ ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || \ ARCH_AT91SAM9G20 || ARCH_AT91CAP9 || \ -@@ -400,9 +400,10 @@ config CPU_FEROCEON_OLD_ID +@@ -400,9 +400,10 @@ # ARMv6 config CPU_V6 bool "Support ARM V6 processor" @@ -24626,7 +24626,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #ifndef __ASSEMBLY__ /* struct s3c24xx_uart_clksrc -@@ -224,7 +243,7 @@ struct s3c2410_uartcfg { +@@ -224,7 +243,7 @@ * or platform_add_device() before the console_initcall() */ @@ -24830,7 +24830,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +#endif /* __PLAT_S3C_SDHCI_H */ --- a/arch/arm/plat-s3c/include/plat/uncompress.h +++ b/arch/arm/plat-s3c/include/plat/uncompress.h -@@ -28,7 +28,7 @@ static void arch_detect_cpu(void); +@@ -28,7 +28,7 @@ /* defines for UART registers */ #include @@ -24839,7 +24839,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* working in physical space... */ #undef S3C2410_WDOGREG -@@ -37,7 +37,7 @@ static void arch_detect_cpu(void); +@@ -37,7 +37,7 @@ /* how many bytes we allow into the FIFO at a time in FIFO mode */ #define FIFO_MAX (14) @@ -24848,7 +24848,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static __inline__ void uart_wr(unsigned int reg, unsigned int val) -@@ -139,6 +139,28 @@ static void arch_decomp_error(const char +@@ -139,6 +139,28 @@ static void error(char *err); @@ -24877,7 +24877,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static void arch_decomp_setup(void) { -@@ -149,6 +171,12 @@ arch_decomp_setup(void) +@@ -149,6 +171,12 @@ arch_detect_cpu(); arch_decomp_wdog_start(); @@ -25067,7 +25067,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 select NO_IOPORT help Base platform code for any Samsung S3C device -@@ -16,24 +16,24 @@ config PLAT_S3C +@@ -16,24 +16,24 @@ config CPU_LLSERIAL_S3C2410_ONLY bool @@ -25096,7 +25096,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 help Selected if there is an S3C2440 (or register compatible) serial low-level implementation needed -@@ -57,6 +57,14 @@ config S3C_BOOT_ERROR_RESET +@@ -57,6 +57,14 @@ Say y here to use the watchdog to reset the system if the kernel decompressor detects an error during decompression. @@ -25111,7 +25111,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 comment "Power management" config S3C2410_PM_DEBUG -@@ -67,6 +75,15 @@ config S3C2410_PM_DEBUG +@@ -67,6 +75,15 @@ Resume code. See for more information. @@ -25127,7 +25127,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 config S3C2410_PM_CHECK bool "S3C2410 PM Suspend Memory CRC" depends on PLAT_S3C && PM && CRC32 -@@ -102,3 +119,73 @@ config S3C_LOWLEVEL_UART_PORT +@@ -102,3 +119,73 @@ such as the `Uncompressing...` at start time. The value of this configuration should be between zero and two. The port must have been initialised by the boot-loader before use. @@ -27737,7 +27737,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include #include -@@ -201,5 +201,5 @@ void __init smdk_machine_init(void) +@@ -201,5 +201,5 @@ platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs)); @@ -27763,7 +27763,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* table of supported CPUs */ static const char name_s3c2400[] = "S3C2400"; -@@ -72,6 +62,7 @@ static const char name_s3c2410[] = "S3C +@@ -72,6 +62,7 @@ static const char name_s3c2412[] = "S3C2412"; static const char name_s3c2440[] = "S3C2440"; static const char name_s3c2442[] = "S3C2442"; @@ -27771,7 +27771,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static const char name_s3c2443[] = "S3C2443"; static const char name_s3c2410a[] = "S3C2410A"; static const char name_s3c2440a[] = "S3C2440A"; -@@ -123,6 +114,15 @@ static struct cpu_table cpu_ids[] __init +@@ -123,6 +114,15 @@ .name = name_s3c2442 }, { @@ -27787,7 +27787,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 .idcode = 0x32412001, .idmask = 0xffffffff, .map_io = s3c2412_map_io, -@@ -169,23 +169,7 @@ static struct map_desc s3c_iodesc[] __in +@@ -169,23 +169,7 @@ IODESC_ENT(UART) }; @@ -27812,7 +27812,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static unsigned long s3c24xx_read_idcode_v5(void) { -@@ -231,6 +215,7 @@ void __init s3c24xx_init_io(struct map_d +@@ -231,6 +215,7 @@ unsigned long idcode = 0x0; /* initialise the io descriptors we need for initialisation */ @@ -27820,7 +27820,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc)); if (cpu_architecture() >= CPU_ARCH_ARMv5) { -@@ -239,117 +224,7 @@ void __init s3c24xx_init_io(struct map_d +@@ -239,117 +224,7 @@ idcode = s3c24xx_read_idcode_v4(); } @@ -27960,7 +27960,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* Serial port registrations */ -@@ -76,6 +78,19 @@ static struct resource s3c2410_uart2_res +@@ -76,6 +78,19 @@ } }; @@ -27980,7 +27980,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = { [0] = { .resources = s3c2410_uart0_resource, -@@ -89,6 +104,10 @@ struct s3c24xx_uart_resources s3c2410_ua +@@ -89,6 +104,10 @@ .resources = s3c2410_uart2_resource, .nr_resources = ARRAY_SIZE(s3c2410_uart2_resource), }, @@ -27991,7 +27991,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 }; /* yart devices */ -@@ -105,13 +124,18 @@ static struct platform_device s3c24xx_ua +@@ -105,13 +124,18 @@ .id = 2, }; @@ -28012,7 +28012,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 }; /* USB Host Controller */ -@@ -192,8 +216,8 @@ void __init s3c24xx_fb_set_platdata(stru +@@ -192,8 +216,8 @@ static struct resource s3c_nand_resource[] = { [0] = { @@ -28023,7 +28023,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 .flags = IORESOURCE_MEM, } }; -@@ -207,6 +231,23 @@ struct platform_device s3c_device_nand = +@@ -207,6 +231,23 @@ EXPORT_SYMBOL(s3c_device_nand); @@ -28047,7 +28047,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* USB Device (Gadget)*/ static struct resource s3c_usbgadget_resource[] = { -@@ -271,31 +312,6 @@ struct platform_device s3c_device_wdt = +@@ -271,31 +312,6 @@ EXPORT_SYMBOL(s3c_device_wdt); @@ -28079,7 +28079,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* IIS */ static struct resource s3c_iis_resource[] = { -@@ -382,8 +398,8 @@ struct platform_device s3c_device_adc = +@@ -382,8 +398,8 @@ static struct resource s3c_sdi_resource[] = { [0] = { @@ -28090,7 +28090,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 .flags = IORESOURCE_MEM, }, [1] = { -@@ -403,36 +419,6 @@ struct platform_device s3c_device_sdi = +@@ -403,36 +419,6 @@ EXPORT_SYMBOL(s3c_device_sdi); @@ -28137,7 +28137,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function) { -@@ -215,3 +216,423 @@ int s3c2410_gpio_irq2pin(unsigned int ir +@@ -215,3 +216,423 @@ } EXPORT_SYMBOL(s3c2410_gpio_irq2pin); @@ -28670,7 +28670,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset) { return -EINVAL; -@@ -125,7 +34,7 @@ static int s3c24xx_gpiolib_banka_input(s +@@ -125,7 +34,7 @@ static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip, unsigned offset, int value) { @@ -28679,7 +28679,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 void __iomem *base = ourchip->base; unsigned long flags; unsigned long dat; -@@ -151,9 +60,10 @@ static int s3c24xx_gpiolib_banka_output( +@@ -151,9 +60,10 @@ return 0; } @@ -28691,7 +28691,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 .chip = { .base = S3C2410_GPA0, .owner = THIS_MODULE, -@@ -161,97 +71,87 @@ static struct s3c24xx_gpio_chip gpios[] +@@ -161,97 +71,87 @@ .ngpio = 24, .direction_input = s3c24xx_gpiolib_banka_input, .direction_output = s3c24xx_gpiolib_banka_output, @@ -29222,7 +29222,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #define irqdbf(x...) #define irqdbf2(x...) -@@ -25,8 +31,15 @@ s3c_irqsub_mask(unsigned int irqno, unsi +@@ -25,8 +31,15 @@ { unsigned long mask; unsigned long submask; @@ -29238,7 +29238,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 mask = __raw_readl(S3C2410_INTMSK); submask |= (1UL << (irqno - IRQ_S3CUART_RX0)); -@@ -39,6 +52,9 @@ s3c_irqsub_mask(unsigned int irqno, unsi +@@ -39,6 +52,9 @@ /* write back masks */ __raw_writel(submask, S3C2410_INTSUBMSK); @@ -29248,7 +29248,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } -@@ -47,8 +63,15 @@ s3c_irqsub_unmask(unsigned int irqno, un +@@ -47,8 +63,15 @@ { unsigned long mask; unsigned long submask; @@ -29264,7 +29264,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 mask = __raw_readl(S3C2410_INTMSK); submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0)); -@@ -57,6 +80,9 @@ s3c_irqsub_unmask(unsigned int irqno, un +@@ -57,6 +80,9 @@ /* write back masks */ __raw_writel(submask, S3C2410_INTSUBMSK); __raw_writel(mask, S3C2410_INTMSK); @@ -29855,7 +29855,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 --- a/arch/arm/plat-s3c24xx/include/plat/s3c2443.h +++ b/arch/arm/plat-s3c24xx/include/plat/s3c2443.h -@@ -16,7 +16,7 @@ struct s3c2410_uartcfg; +@@ -16,7 +16,7 @@ extern int s3c2443_init(void); @@ -30054,7 +30054,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } static inline void -@@ -155,9 +67,19 @@ s3c_irq_maskack(unsigned int irqno) +@@ -155,9 +67,19 @@ { unsigned long bitval = 1UL << (irqno - IRQ_EINT0); unsigned long mask; @@ -30074,7 +30074,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 __raw_writel(bitval, S3C2410_SRCPND); __raw_writel(bitval, S3C2410_INTPND); -@@ -168,15 +90,25 @@ static void +@@ -168,15 +90,25 @@ s3c_irq_unmask(unsigned int irqno) { unsigned long mask; @@ -30100,7 +30100,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } struct irq_chip s3c_irq_level_chip = { -@@ -589,59 +521,6 @@ s3c_irq_demux_extint4t7(unsigned int irq +@@ -589,59 +521,6 @@ } } @@ -30160,7 +30160,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* s3c24xx_init_irq * * Initialise S3C2410 IRQ system -@@ -672,26 +551,26 @@ void __init s3c24xx_init_irq(void) +@@ -672,26 +551,26 @@ last = 0; for (i = 0; i < 4; i++) { @@ -30353,7 +30353,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 help Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems. -@@ -49,9 +63,31 @@ config S3C2410_DMA_DEBUG +@@ -49,9 +63,31 @@ Enable debugging output for the DMA code. This option sends info to the kernel log, at priority KERN_DEBUG. @@ -30387,7 +30387,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 endif --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile -@@ -17,9 +17,8 @@ obj-y += irq.o +@@ -17,9 +17,8 @@ obj-y += devs.o obj-y += gpio.o obj-y += gpiolib.o @@ -30398,7 +30398,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 # Architecture dependant builds -@@ -28,7 +27,26 @@ obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq +@@ -28,7 +27,26 @@ obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o obj-$(CONFIG_PM) += pm.o @@ -31940,7 +31940,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #define PFX "s3c24xx-pm: " static struct sleep_save core_save[] = { -@@ -76,371 +67,26 @@ static struct sleep_save core_save[] = { +@@ -76,371 +67,26 @@ SAVE_ITEM(S3C2410_BANKCON4), SAVE_ITEM(S3C2410_BANKCON5), @@ -32317,7 +32317,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 { unsigned long irqstate; unsigned long pinstate; -@@ -455,21 +101,21 @@ static void s3c2410_pm_check_resume_pin( +@@ -455,21 +101,21 @@ if (!irqstate) { if (pinstate == S3C2410_GPIO_IRQ) @@ -32343,7 +32343,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 { int pin; -@@ -479,336 +125,24 @@ static void s3c2410_pm_configure_extint( +@@ -479,336 +125,24 @@ */ for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) { @@ -32690,7 +32690,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 -} --- a/arch/arm/plat-s3c24xx/pm-simtec.c +++ b/arch/arm/plat-s3c24xx/pm-simtec.c -@@ -61,7 +61,7 @@ static __init int pm_simtec_init(void) +@@ -61,7 +61,7 @@ __raw_writel(gstatus4, S3C2410_GSTATUS4); @@ -33014,7 +33014,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static struct map_desc s3c244x_iodesc[] __initdata = { IODESC_ENT(CLKPWR), -@@ -56,32 +59,37 @@ void __init s3c244x_init_uarts(struct s3 +@@ -56,32 +59,37 @@ s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no); } @@ -33059,7 +33059,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 clkdiv = __raw_readl(S3C2410_CLKDIVN); camdiv = __raw_readl(S3C2440_CAMDIVN); -@@ -107,18 +115,24 @@ void __init s3c244x_init_clocks(int xtal +@@ -107,18 +115,24 @@ } hclk = fclk / hdiv; @@ -33086,7 +33086,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 s3c2410_baseclk_add(); } -@@ -134,13 +148,13 @@ static struct sleep_save s3c244x_sleep[] +@@ -134,13 +148,13 @@ static int s3c244x_suspend(struct sys_device *dev, pm_message_t state) { @@ -33112,7 +33112,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include #include -@@ -102,13 +101,13 @@ static int s3c244x_clk_add(struct sys_de +@@ -102,13 +101,13 @@ if (clk_get_rate(clock_upll) > (94 * MHZ)) { clk_usb_bus.rate = clk_get_rate(clock_upll) / 2; @@ -33187,7 +33187,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 stmfd sp!, { r4 - r12, lr } @@ store co-processor registers -@@ -84,7 +84,7 @@ resume_with_mmu: +@@ -84,7 +84,7 @@ .ltorg @@ the next bits sit in the .data segment, even though they @@ -33196,7 +33196,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 @@ accessed by the resume code before it can restore the MMU. @@ This means that the variable has to be close enough for the @@ code to read it... since the .text segment needs to be RO, -@@ -92,19 +92,19 @@ resume_with_mmu: +@@ -92,19 +92,19 @@ .data @@ -33220,7 +33220,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 * * resume code entry for bootloader to call * -@@ -113,7 +113,7 @@ s3c2410_sleep_save_phys: +@@ -113,7 +113,7 @@ * must not write to the code segment (code is read-only) */ @@ -33229,7 +33229,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE msr cpsr_c, r0 -@@ -145,7 +145,7 @@ ENTRY(s3c2410_cpu_resume) +@@ -145,7 +145,7 @@ mcr p15, 0, r1, c8, c7, 0 @@ invalidate I & D TLBs mcr p15, 0, r1, c7, c7, 0 @@ invalidate I & D caches @@ -33361,7 +33361,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #define TIMER_USEC_SHIFT 16 -@@ -177,11 +183,7 @@ static void s3c2410_timer_setup (void) +@@ -177,11 +183,7 @@ tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK; tcfg1 |= S3C2410_TCFG1_MUX4_TCLK1; } else { @@ -33374,7 +33374,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 * 70MHz are not values we can directly generate the timer * value from, we need to pre-scale and divide before using it. * -@@ -189,19 +191,9 @@ static void s3c2410_timer_setup (void) +@@ -189,19 +191,9 @@ * (8.45 ticks per usec) */ @@ -33395,7 +33395,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK; tcfg1 |= S3C2410_TCFG1_MUX4_DIV2; -@@ -245,16 +237,244 @@ static void s3c2410_timer_setup (void) +@@ -245,16 +237,244 @@ tcon |= S3C2410_TCON_T4START; tcon &= ~S3C2410_TCON_T4MANUALUPD; __raw_writel(tcon, S3C2410_TCON); @@ -38455,7 +38455,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 + --- a/Documentation/arm/Samsung-S3C24XX/Suspend.txt +++ b/Documentation/arm/Samsung-S3C24XX/Suspend.txt -@@ -40,13 +40,13 @@ Resuming +@@ -40,13 +40,13 @@ Machine Support --------------- @@ -38472,7 +38472,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 needs to setup anything else for power management support. There is currently no support for over-riding the default method of -@@ -74,7 +74,7 @@ statuc void __init machine_init(void) +@@ -74,7 +74,7 @@ enable_irq_wake(IRQ_EINT0); @@ -78733,7 +78733,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +#endif /* _WMI_HOST_H_ */ --- a/drivers/base/bus.c +++ b/drivers/base/bus.c -@@ -141,6 +141,29 @@ void bus_remove_file(struct bus_type *bu +@@ -141,6 +141,29 @@ } EXPORT_SYMBOL_GPL(bus_remove_file); @@ -78765,7 +78765,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 }; --- a/drivers/base/core.c +++ b/drivers/base/core.c -@@ -55,6 +55,11 @@ static inline int device_is_not_partitio +@@ -55,6 +55,11 @@ */ const char *dev_driver_string(const struct device *dev) { @@ -78779,7 +78779,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 (dev->class ? dev->class->name : "")); --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c -@@ -69,9 +69,9 @@ void device_pm_unlock(void) +@@ -69,9 +69,9 @@ */ void device_pm_add(struct device *dev) { @@ -78793,7 +78793,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 if (dev->parent->power.status >= DPM_SUSPENDING) --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig -@@ -66,6 +66,18 @@ config VT_CONSOLE +@@ -66,6 +66,18 @@ If unsure, say Y. @@ -78844,7 +78844,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* i2c controller state */ -@@ -64,6 +62,7 @@ struct s3c24xx_i2c { +@@ -64,6 +62,7 @@ unsigned int msg_ptr; unsigned int tx_setup; @@ -78852,7 +78852,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 enum s3c24xx_i2c_state state; unsigned long clkrate; -@@ -71,7 +70,6 @@ struct s3c24xx_i2c { +@@ -71,7 +70,6 @@ void __iomem *regs; struct clk *clk; struct device *dev; @@ -78860,7 +78860,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 struct resource *ioarea; struct i2c_adapter adap; -@@ -80,16 +78,7 @@ struct s3c24xx_i2c { +@@ -80,16 +78,7 @@ #endif }; @@ -78878,7 +78878,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* s3c24xx_i2c_is2440() * -@@ -103,21 +92,6 @@ static inline int s3c24xx_i2c_is2440(str +@@ -103,21 +92,6 @@ return !strcmp(pdev->name, "s3c2440-i2c"); } @@ -78900,7 +78900,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* s3c24xx_i2c_master_complete * * complete the message and wake up the caller, using the given return code, -@@ -130,7 +104,7 @@ static inline void s3c24xx_i2c_master_co +@@ -130,7 +104,7 @@ i2c->msg_ptr = 0; i2c->msg = NULL; @@ -78909,7 +78909,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 i2c->msg_num = 0; if (ret) i2c->msg_idx = ret; -@@ -141,19 +115,17 @@ static inline void s3c24xx_i2c_master_co +@@ -141,19 +115,17 @@ static inline void s3c24xx_i2c_disable_ack(struct s3c24xx_i2c *i2c) { unsigned long tmp; @@ -78931,7 +78931,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } /* irq enable/disable functions */ -@@ -161,15 +133,23 @@ static inline void s3c24xx_i2c_enable_ac +@@ -161,15 +133,23 @@ static inline void s3c24xx_i2c_disable_irq(struct s3c24xx_i2c *i2c) { unsigned long tmp; @@ -78957,7 +78957,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 tmp = readl(i2c->regs + S3C2410_IICCON); writel(tmp | S3C2410_IICCON_IRQEN, i2c->regs + S3C2410_IICCON); } -@@ -177,10 +157,10 @@ static inline void s3c24xx_i2c_enable_ir +@@ -177,10 +157,10 @@ /* s3c24xx_i2c_message_start * @@ -78970,7 +78970,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 struct i2c_msg *msg) { unsigned int addr = (msg->addr & 0x7f) << 1; -@@ -199,15 +179,15 @@ static void s3c24xx_i2c_message_start(st +@@ -199,15 +179,15 @@ if (msg->flags & I2C_M_REV_DIR_ADDR) addr ^= 1; @@ -78989,7 +78989,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* delay here to ensure the data byte has gotten onto the bus * before the transaction is started */ -@@ -215,8 +195,8 @@ static void s3c24xx_i2c_message_start(st +@@ -215,8 +195,8 @@ dev_dbg(i2c->dev, "iiccon, %08lx\n", iiccon); writel(iiccon, i2c->regs + S3C2410_IICCON); @@ -79000,7 +79000,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 writel(stat, i2c->regs + S3C2410_IICSTAT); } -@@ -227,11 +207,11 @@ static inline void s3c24xx_i2c_stop(stru +@@ -227,11 +207,11 @@ dev_dbg(i2c->dev, "STOP\n"); /* stop the transfer */ @@ -79015,7 +79015,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 s3c24xx_i2c_master_complete(i2c, ret); s3c24xx_i2c_disable_irq(i2c); } -@@ -241,7 +221,7 @@ static inline void s3c24xx_i2c_stop(stru +@@ -241,7 +221,7 @@ /* is_lastmsg() * @@ -79024,7 +79024,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 */ static inline int is_lastmsg(struct s3c24xx_i2c *i2c) -@@ -289,14 +269,14 @@ static int i2s_s3c_irq_nextbyte(struct s +@@ -289,14 +269,14 @@ case STATE_STOP: dev_err(i2c->dev, "%s: called in STATE_STOP\n", __func__); @@ -79041,7 +79041,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 if (iicstat & S3C2410_IICSTAT_LASTBIT && !(i2c->msg->flags & I2C_M_IGNORE_NAK)) { /* ack was not received... */ -@@ -322,7 +302,7 @@ static int i2s_s3c_irq_nextbyte(struct s +@@ -322,7 +302,7 @@ if (i2c->state == STATE_READ) goto prepare_read; @@ -79050,7 +79050,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 * send a byte as well */ case STATE_WRITE: -@@ -339,7 +319,7 @@ static int i2s_s3c_irq_nextbyte(struct s +@@ -339,7 +319,7 @@ } } @@ -79059,7 +79059,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 if (!is_msgend(i2c)) { byte = i2c->msg->buf[i2c->msg_ptr++]; -@@ -359,9 +339,9 @@ static int i2s_s3c_irq_nextbyte(struct s +@@ -359,9 +339,9 @@ dev_dbg(i2c->dev, "WRITE: Next Message\n"); i2c->msg_ptr = 0; @@ -79071,7 +79071,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* check to see if we need to do another message */ if (i2c->msg->flags & I2C_M_NOSTART) { -@@ -375,7 +355,6 @@ static int i2s_s3c_irq_nextbyte(struct s +@@ -375,7 +355,6 @@ goto retry_write; } else { @@ -79079,7 +79079,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* send the new start */ s3c24xx_i2c_message_start(i2c, i2c->msg); i2c->state = STATE_START; -@@ -389,7 +368,7 @@ static int i2s_s3c_irq_nextbyte(struct s +@@ -389,7 +368,7 @@ break; case STATE_READ: @@ -79088,7 +79088,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 * something with it, and then work out wether we are * going to do any more read/write */ -@@ -397,13 +376,13 @@ static int i2s_s3c_irq_nextbyte(struct s +@@ -397,13 +376,13 @@ byte = readb(i2c->regs + S3C2410_IICDS); i2c->msg->buf[i2c->msg_ptr++] = byte; @@ -79104,7 +79104,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } else if (is_msgend(i2c)) { /* ok, we've read the entire buffer, see if there * is anything else we need to do */ -@@ -429,7 +408,7 @@ static int i2s_s3c_irq_nextbyte(struct s +@@ -429,7 +408,7 @@ /* acknowlegde the IRQ and get back on with the work */ out_ack: @@ -79113,7 +79113,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 tmp &= ~S3C2410_IICCON_IRQPEND; writel(tmp, i2c->regs + S3C2410_IICCON); out: -@@ -450,19 +429,19 @@ static irqreturn_t s3c24xx_i2c_irq(int i +@@ -450,19 +429,19 @@ status = readl(i2c->regs + S3C2410_IICSTAT); if (status & S3C2410_IICSTAT_ARBITR) { @@ -79136,7 +79136,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* pretty much this leaves us with the fact that we've * transmitted or received whatever byte we last sent */ -@@ -485,16 +464,13 @@ static int s3c24xx_i2c_set_master(struct +@@ -485,16 +464,13 @@ while (timeout-- > 0) { iicstat = readl(i2c->regs + S3C2410_IICSTAT); @@ -79154,7 +79154,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 return -ETIMEDOUT; } -@@ -503,7 +479,8 @@ static int s3c24xx_i2c_set_master(struct +@@ -503,7 +479,8 @@ * this starts an i2c transfer */ @@ -79164,7 +79164,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 { unsigned long timeout; int ret; -@@ -511,6 +488,15 @@ static int s3c24xx_i2c_doxfer(struct s3c +@@ -511,6 +488,15 @@ if (i2c->suspended) return -EIO; @@ -79180,7 +79180,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 ret = s3c24xx_i2c_set_master(i2c); if (ret != 0) { dev_err(i2c->dev, "cannot get bus (error %d)\n", ret); -@@ -529,12 +515,12 @@ static int s3c24xx_i2c_doxfer(struct s3c +@@ -529,12 +515,12 @@ s3c24xx_i2c_enable_irq(i2c); s3c24xx_i2c_message_start(i2c, msgs); spin_unlock_irq(&i2c->lock); @@ -79195,7 +79195,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 * noisy when doing an i2cdetect */ if (timeout == 0) -@@ -591,19 +577,6 @@ static const struct i2c_algorithm s3c24x +@@ -591,19 +577,6 @@ .functionality = s3c24xx_i2c_func, }; @@ -79215,7 +79215,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* s3c24xx_i2c_calcdivisor * * return the divisor settings for a given frequency -@@ -643,7 +616,7 @@ static inline int freq_acceptable(unsign +@@ -643,7 +616,7 @@ { int diff = freq - wanted; @@ -79224,7 +79224,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } /* s3c24xx_i2c_clockrate -@@ -655,7 +628,7 @@ static inline int freq_acceptable(unsign +@@ -655,7 +628,7 @@ static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got) { @@ -79233,7 +79233,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 unsigned long clkin = clk_get_rate(i2c->clk); unsigned int divs, div1; u32 iiccon; -@@ -663,10 +636,8 @@ static int s3c24xx_i2c_clockrate(struct +@@ -663,10 +636,8 @@ int start, end; i2c->clkrate = clkin; @@ -79245,7 +79245,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 dev_dbg(i2c->dev, "pdata %p, freq %lu %lu..%lu\n", pdata, pdata->bus_freq, pdata->min_freq, pdata->max_freq); -@@ -774,7 +745,7 @@ static inline void s3c24xx_i2c_deregiste +@@ -774,7 +745,7 @@ /* s3c24xx_i2c_init * @@ -79254,7 +79254,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 */ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c) -@@ -785,15 +756,15 @@ static int s3c24xx_i2c_init(struct s3c24 +@@ -785,15 +756,15 @@ /* get the plafrom data */ @@ -79274,7 +79274,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 writeb(pdata->slave_addr, i2c->regs + S3C2410_IICADD); dev_info(i2c->dev, "slave address 0x%02x\n", pdata->slave_addr); -@@ -831,12 +802,32 @@ static int s3c24xx_i2c_init(struct s3c24 +@@ -831,12 +802,32 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) { @@ -79309,7 +79309,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* find the clock and enable it */ -@@ -878,7 +869,8 @@ static int s3c24xx_i2c_probe(struct plat +@@ -878,7 +869,8 @@ goto err_ioarea; } @@ -79319,7 +79319,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* setup info block for the i2c core */ -@@ -892,29 +884,23 @@ static int s3c24xx_i2c_probe(struct plat +@@ -892,29 +884,23 @@ goto err_iomap; /* find the IRQ for this unit (note, this relies on the init call to @@ -79355,7 +79355,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 ret = s3c24xx_i2c_register_cpufreq(i2c); if (ret < 0) { dev_err(&pdev->dev, "failed to register cpufreq notifier\n"); -@@ -944,7 +930,7 @@ static int s3c24xx_i2c_probe(struct plat +@@ -944,7 +930,7 @@ s3c24xx_i2c_deregister_cpufreq(i2c); err_irq: @@ -79364,7 +79364,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 err_iomap: iounmap(i2c->regs); -@@ -958,6 +944,7 @@ static int s3c24xx_i2c_probe(struct plat +@@ -958,6 +944,7 @@ clk_put(i2c->clk); err_noclk: @@ -79372,7 +79372,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 return ret; } -@@ -973,7 +960,7 @@ static int s3c24xx_i2c_remove(struct pla +@@ -973,7 +960,7 @@ s3c24xx_i2c_deregister_cpufreq(i2c); i2c_del_adapter(&i2c->adap); @@ -79381,7 +79381,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 clk_disable(i2c->clk); clk_put(i2c->clk); -@@ -982,6 +969,7 @@ static int s3c24xx_i2c_remove(struct pla +@@ -982,6 +969,7 @@ release_resource(i2c->ioarea); kfree(i2c->ioarea); @@ -79391,7 +79391,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig -@@ -455,11 +455,12 @@ config I2C_PXA_SLAVE +@@ -455,11 +455,12 @@ I2C bus. config I2C_S3C2410 @@ -79409,7 +79409,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 tristate "Renesas SH7760 I2C Controller" --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig -@@ -53,6 +53,26 @@ config SENSORS_EEPROM +@@ -53,6 +53,26 @@ This driver can also be built as a module. If so, the module will be called eeprom. @@ -79436,7 +79436,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 config SENSORS_PCF8574 tristate "Philips PCF8574 and PCF8574A (DEPRECATED)" depends on EXPERIMENTAL && GPIO_PCF857X = "n" -@@ -185,4 +205,23 @@ config MCU_MPC8349EMITX +@@ -185,4 +205,23 @@ also register MCU GPIOs with the generic GPIO API, so you'll able to use MCU pins as GPIOs. @@ -79462,7 +79462,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 endmenu --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile -@@ -15,6 +15,8 @@ obj-$(CONFIG_AT24) += at24.o +@@ -15,6 +15,8 @@ obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o obj-$(CONFIG_SENSORS_MAX6875) += max6875.o obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o @@ -79471,7 +79471,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o obj-$(CONFIG_PCF8575) += pcf8575.o obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o -@@ -23,6 +25,8 @@ obj-$(CONFIG_TPS65010) += tps65010.o +@@ -23,6 +25,8 @@ obj-$(CONFIG_MENELAUS) += menelaus.o obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o obj-$(CONFIG_MCU_MPC8349EMITX) += mcu_mpc8349emitx.o @@ -84455,7 +84455,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* ------------------------------------------------------------------------- */ /* Copyright (C) 1995-99 Simon G. Vogl -@@ -158,10 +157,16 @@ static int i2c_device_suspend(struct dev +@@ -158,10 +157,16 @@ if (!dev->driver) return 0; @@ -84472,7 +84472,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } static int i2c_device_resume(struct device * dev) -@@ -170,10 +175,16 @@ static int i2c_device_resume(struct devi +@@ -170,10 +175,16 @@ if (!dev->driver) return 0; @@ -84489,7 +84489,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } static void i2c_client_release(struct device *dev) -@@ -1129,11 +1140,11 @@ static int i2c_probe_address(struct i2c_ +@@ -1129,11 +1140,11 @@ int err; /* Make sure the address is valid */ @@ -84516,7 +84516,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 struct gpio_keys_button *button; --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig -@@ -323,4 +323,21 @@ config KEYBOARD_SH_KEYSC +@@ -323,4 +323,21 @@ To compile this driver as a module, choose M here: the module will be called sh_keysc. @@ -84540,7 +84540,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 endif --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile -@@ -14,6 +14,8 @@ obj-$(CONFIG_KEYBOARD_LOCOMO) += locomo +@@ -14,6 +14,8 @@ obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o obj-$(CONFIG_KEYBOARD_CORGI) += corgikbd.o @@ -85253,7 +85253,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +MODULE_LICENSE("GPL"); --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig -@@ -236,4 +236,25 @@ config INPUT_GPIO_BUTTONS +@@ -236,4 +236,25 @@ To compile this driver as a module, choose M here: the module will be called gpio-buttons. @@ -86158,7 +86158,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +module_exit(lis302dl_exit); --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile -@@ -22,3 +22,6 @@ obj-$(CONFIG_INPUT_UINPUT) += uinput.o +@@ -22,3 +22,6 @@ obj-$(CONFIG_INPUT_APANEL) += apanel.o obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o obj-$(CONFIG_INPUT_GPIO_BUTTONS) += gpio_buttons.o @@ -86419,7 +86419,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +MODULE_ALIAS("platform:pcf50633-input"); --- a/drivers/input/mousedev.c +++ b/drivers/input/mousedev.c -@@ -1016,6 +1016,7 @@ static const struct input_device_id mous +@@ -1016,6 +1016,7 @@ .evbit = { BIT_MASK(EV_KEY) | BIT_MASK(EV_REL) }, .relbit = { BIT_MASK(REL_WHEEL) }, }, /* A separate scrollwheel */ @@ -86427,7 +86427,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 { .flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT | -@@ -1025,6 +1026,7 @@ static const struct input_device_id mous +@@ -1025,6 +1026,7 @@ .absbit = { BIT_MASK(ABS_X) | BIT_MASK(ABS_Y) }, }, /* A tablet like device, at least touch detection, two absolute axes */ @@ -86437,7 +86437,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 INPUT_DEVICE_ID_MATCH_KEYBIT | --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig -@@ -11,6 +11,50 @@ menuconfig INPUT_TOUCHSCREEN +@@ -11,6 +11,50 @@ if INPUT_TOUCHSCREEN @@ -86488,7 +86488,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 config TOUCHSCREEN_ADS7846 tristate "ADS7846/TSC2046 and ADS7843 based touchscreens" depends on SPI_MASTER -@@ -71,6 +115,25 @@ config TOUCHSCREEN_FUJITSU +@@ -71,6 +115,25 @@ To compile this driver as a module, choose M here: the module will be called fujitsu-ts. @@ -86514,7 +86514,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 config TOUCHSCREEN_GUNZE tristate "Gunze AHL-51S touchscreen" select SERIO -@@ -376,4 +439,15 @@ config TOUCHSCREEN_TOUCHIT213 +@@ -376,4 +439,15 @@ To compile this driver as a module, choose M here: the module will be called touchit213. @@ -86532,7 +86532,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 + --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile -@@ -31,3 +31,10 @@ wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705) + +@@ -31,3 +31,10 @@ wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9712) += wm9712.o wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9713) += wm9713.o obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE) += mainstone-wm97xx.o @@ -88029,7 +88029,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +}; --- a/drivers/Kconfig +++ b/drivers/Kconfig -@@ -107,4 +107,6 @@ source "drivers/uio/Kconfig" +@@ -107,4 +107,6 @@ source "drivers/xen/Kconfig" source "drivers/staging/Kconfig" @@ -88038,7 +88038,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 endmenu --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig -@@ -33,7 +33,7 @@ config LEDS_LOCOMO +@@ -33,7 +33,7 @@ config LEDS_S3C24XX tristate "LED Support for Samsung S3C24XX GPIO LEDs" @@ -88047,7 +88047,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 help This option enables support for LEDs connected to GPIO lines on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440. -@@ -171,6 +171,18 @@ config LEDS_DA903X +@@ -171,6 +171,18 @@ This option enables support for on-chip LED drivers found on Dialog Semiconductor DA9030/DA9034 PMICs. @@ -88068,7 +88068,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 config LEDS_TRIGGERS --- a/drivers/leds/led-class.c +++ b/drivers/leds/led-class.c -@@ -56,8 +56,10 @@ static ssize_t led_brightness_store(stru +@@ -56,8 +56,10 @@ if (count == size) { ret = count; @@ -88475,7 +88475,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +MODULE_LICENSE("GPL"); --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile -@@ -24,6 +24,8 @@ obj-$(CONFIG_LEDS_FSG) += leds-fsg.o +@@ -24,6 +24,8 @@ obj-$(CONFIG_LEDS_PCA955X) += leds-pca955x.o obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o obj-$(CONFIG_LEDS_HP_DISK) += leds-hp-disk.o @@ -88486,7 +88486,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o --- a/drivers/Makefile +++ b/drivers/Makefile -@@ -86,6 +86,7 @@ obj-$(CONFIG_CPU_IDLE) += cpuidle/ +@@ -86,6 +86,7 @@ obj-y += idle/ obj-$(CONFIG_MMC) += mmc/ obj-$(CONFIG_MEMSTICK) += memstick/ @@ -88494,7 +88494,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 obj-$(CONFIG_NEW_LEDS) += leds/ obj-$(CONFIG_INFINIBAND) += infiniband/ obj-$(CONFIG_SGI_SN) += sn/ -@@ -98,6 +99,7 @@ obj-$(CONFIG_DCA) += dca/ +@@ -98,6 +99,7 @@ obj-$(CONFIG_HID) += hid/ obj-$(CONFIG_PPC_PS3) += ps3/ obj-$(CONFIG_OF) += of/ @@ -93571,7 +93571,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 + --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig -@@ -153,6 +153,55 @@ config MFD_WM8350_I2C +@@ -153,6 +153,55 @@ I2C as the control interface. Additional options must be selected to enable support for the functionality of the chip. @@ -93637,7 +93637,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 obj-$(CONFIG_HTC_EGPIO) += htc-egpio.o obj-$(CONFIG_HTC_PASIC3) += htc-pasic3.o -@@ -31,4 +32,13 @@ obj-$(CONFIG_MCP_UCB1200) += ucb1x00-ass +@@ -31,4 +32,13 @@ endif obj-$(CONFIG_UCB1400_CORE) += ucb1400_core.o @@ -95605,7 +95605,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 + --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig -@@ -401,6 +401,11 @@ config THINKPAD_ACPI_HOTKEY_POLL +@@ -401,6 +401,11 @@ If you are not sure, say Y here. The driver enables polling only if it is strictly necessary to do so. @@ -95617,7 +95617,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 config ATMEL_SSC tristate "Device driver for Atmel SSC peripheral" depends on AVR32 || ARCH_AT91 -@@ -500,4 +505,9 @@ config SGI_GRU_DEBUG +@@ -500,4 +505,9 @@ source "drivers/misc/c2port/Kconfig" @@ -95751,7 +95751,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 + --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile -@@ -33,3 +33,8 @@ obj-$(CONFIG_SGI_XP) += sgi-xp/ +@@ -33,3 +33,8 @@ obj-$(CONFIG_SGI_GRU) += sgi-gru/ obj-$(CONFIG_HP_ILO) += hpilo.o obj-$(CONFIG_C2PORT) += c2port/ @@ -96429,7 +96429,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +MODULE_LICENSE("GPL"); --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c -@@ -57,10 +57,11 @@ static int mmc_schedule_delayed_work(str +@@ -57,10 +57,11 @@ /* * Internal function. Flush all scheduled work from the MMC work queue. */ @@ -96442,7 +96442,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /** * mmc_request_done - finish processing an MMC request -@@ -495,7 +496,13 @@ void mmc_set_timing(struct mmc_host *hos +@@ -495,7 +496,13 @@ */ static void mmc_power_up(struct mmc_host *host) { @@ -96459,7 +96459,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 if (mmc_host_is_spi(host)) { --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig -@@ -48,6 +48,18 @@ config MMC_SDHCI_PCI +@@ -48,6 +48,18 @@ If unsure, say N. @@ -96480,7 +96480,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 depends on MMC_SDHCI_PCI --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile -@@ -11,6 +11,7 @@ obj-$(CONFIG_MMC_PXA) += pxamci.o +@@ -11,6 +11,7 @@ obj-$(CONFIG_MMC_IMX) += imxmmc.o obj-$(CONFIG_MMC_SDHCI) += sdhci.o obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o @@ -96515,7 +96515,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include "s3cmci.h" -@@ -47,6 +56,9 @@ static const int dbgmap_err = dbg_fail +@@ -47,6 +56,9 @@ static const int dbgmap_info = dbg_info | dbg_conf; static const int dbgmap_debug = dbg_err | dbg_debug; @@ -96525,7 +96525,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #define dbg(host, channels, args...) \ do { \ if (dbgmap_err & channels) \ -@@ -280,8 +292,11 @@ static void do_pio_read(struct s3cmci_ho +@@ -280,8 +292,11 @@ * an even multiple of 4. */ if (fifo >= host->pio_bytes) fifo = host->pio_bytes; @@ -96538,7 +96538,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 host->pio_bytes -= fifo; host->pio_count += fifo; -@@ -353,8 +368,11 @@ static void do_pio_write(struct s3cmci_h +@@ -353,8 +368,11 @@ * words, so round down to an even multiple of 4. */ if (fifo >= host->pio_bytes) fifo = host->pio_bytes; @@ -96551,7 +96551,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 host->pio_bytes -= fifo; host->pio_count += fifo; -@@ -373,7 +391,6 @@ static void pio_tasklet(unsigned long da +@@ -373,7 +391,6 @@ { struct s3cmci_host *host = (struct s3cmci_host *) data; @@ -96559,7 +96559,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 disable_irq(host->irq); if (host->pio_active == XFER_WRITE) -@@ -614,7 +631,6 @@ irq_out: +@@ -614,7 +631,6 @@ spin_unlock_irqrestore(&host->complete_lock, iflags); return IRQ_HANDLED; @@ -96567,7 +96567,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } /* -@@ -1027,6 +1043,7 @@ static void s3cmci_send_request(struct m +@@ -1026,6 +1042,7 @@ dbg(host, dbg_err, "data prepare error %d\n", res); cmd->error = res; cmd->data->error = res; @@ -96575,7 +96575,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 mmc_request_done(mmc, mrq); return; -@@ -1264,10 +1281,8 @@ static int __devinit s3cmci_probe(struct +@@ -1263,10 +1280,8 @@ host->is2440 = is2440; host->pdata = pdev->dev.platform_data; @@ -96587,7 +96587,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 spin_lock_init(&host->complete_lock); tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host); -@@ -1380,6 +1395,18 @@ static int __devinit s3cmci_probe(struct +@@ -1379,6 +1394,18 @@ mmc->f_min = host->clk_rate / (host->clk_div * 256); mmc->f_max = host->clk_rate / host->clk_div; @@ -96606,7 +96606,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 if (host->pdata->ocr_avail) mmc->ocr_avail = host->pdata->ocr_avail; -@@ -1492,18 +1519,60 @@ static int __devinit s3cmci_2440_probe(s +@@ -1491,18 +1518,60 @@ #ifdef CONFIG_PM @@ -96669,7 +96669,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } #else /* CONFIG_PM */ -@@ -1561,9 +1630,13 @@ static void __exit s3cmci_exit(void) +@@ -1560,9 +1629,13 @@ module_init(s3cmci_init); module_exit(s3cmci_exit); @@ -96695,7 +96695,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* FIXME: DMA Resource management ?! */ #define S3CMCI_DMA 0 -@@ -68,6 +71,13 @@ struct s3cmci_host { +@@ -68,6 +71,13 @@ unsigned int ccnt, dcnt; struct tasklet_struct pio_tasklet; @@ -96711,7 +96711,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #endif --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c -@@ -73,6 +73,11 @@ static void sdhci_dumpregs(struct sdhci_ +@@ -73,6 +73,11 @@ readl(host->ioaddr + SDHCI_CAPABILITIES), readl(host->ioaddr + SDHCI_MAX_CURRENT)); @@ -96723,7 +96723,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 printk(KERN_DEBUG DRIVER_NAME ": ===========================================\n"); } -@@ -731,6 +736,23 @@ static void sdhci_set_transfer_mode(stru +@@ -731,6 +736,23 @@ writew(mode, host->ioaddr + SDHCI_TRANSFER_MODE); } @@ -96747,7 +96747,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static void sdhci_finish_data(struct sdhci_host *host) { struct mmc_data *data; -@@ -744,6 +766,8 @@ static void sdhci_finish_data(struct sdh +@@ -744,6 +766,8 @@ if (host->flags & SDHCI_USE_ADMA) sdhci_adma_table_post(host, data); else { @@ -96756,7 +96756,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, (data->flags & MMC_DATA_READ) ? DMA_FROM_DEVICE : DMA_TO_DEVICE); -@@ -883,13 +907,18 @@ static void sdhci_finish_command(struct +@@ -883,13 +907,18 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock) { @@ -96778,7 +96778,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL); if (clock == 0) -@@ -926,6 +955,8 @@ out: +@@ -926,6 +955,8 @@ host->clock = clock; } @@ -96787,7 +96787,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static void sdhci_set_power(struct sdhci_host *host, unsigned short power) { u8 pwr; -@@ -999,12 +1030,13 @@ static void sdhci_request(struct mmc_hos +@@ -999,12 +1030,13 @@ #endif host->mrq = mrq; @@ -96802,7 +96802,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 sdhci_send_command(host, mrq->cmd); mmiowb(); -@@ -1033,6 +1065,9 @@ static void sdhci_set_ios(struct mmc_hos +@@ -1033,6 +1065,9 @@ sdhci_init(host); } @@ -96812,7 +96812,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 sdhci_set_clock(host, ios->clock); if (ios->power_mode == MMC_POWER_OFF) -@@ -1136,7 +1171,7 @@ static void sdhci_tasklet_card(unsigned +@@ -1136,7 +1171,7 @@ host = (struct sdhci_host*)param; spin_lock_irqsave(&host->lock, flags); @@ -96821,7 +96821,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) { if (host->mrq) { printk(KERN_ERR "%s: Card removed during transfer!\n", -@@ -1151,7 +1186,7 @@ static void sdhci_tasklet_card(unsigned +@@ -1151,7 +1186,7 @@ tasklet_schedule(&host->finish_tasklet); } } @@ -96830,33 +96830,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 spin_unlock_irqrestore(&host->lock, flags); mmc_detect_change(host->mmc, msecs_to_jiffies(200)); -@@ -1283,11 +1318,24 @@ static void sdhci_cmd_irq(struct sdhci_h - * controllers. - */ - if (host->cmd->flags & MMC_RSP_BUSY) { -+ u32 present; -+ - if (host->cmd->data) - DBG("Cannot wait for busy signal when also " - "doing a data transfer"); -- else -+ else if (!(host->quirks & SDHCI_QUIRK_NO_TCIRQ_ON_NOT_BUSY)) - return; -+ -+ /* The Samsung SDHCI does not seem to provide an INT_DATA_END -+ * when the system goes non-busy, so check the state of the -+ * transfer by reading SDHCI_PRESENT_STATE to see if the -+ * controller is ready -+ */ -+ -+ present = readl(host->ioaddr + SDHCI_PRESENT_STATE); -+ DBG("busy? present %08x, intstat %08x\n", present, intmask); -+ -+ /* fall through and take the SDHCI_INT_RESPONSE */ - } - - if (intmask & SDHCI_INT_RESPONSE) -@@ -1604,17 +1652,23 @@ int sdhci_add_host(struct sdhci_host *ho +@@ -1607,17 +1642,23 @@ mmc_dev(host->mmc)->dma_mask = &host->dma_mask; } @@ -96895,16 +96869,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #define SDHCI_HOST_CONTROL 0x28 #define SDHCI_CTRL_LED 0x01 -@@ -210,6 +211,8 @@ struct sdhci_host { - #define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13) - /* Controller supports high speed but doesn't have the caps bit set */ - #define SDHCI_QUIRK_FORCE_HIGHSPEED (1<<14) -+/* Controller does not provide transfer-complete interrupt when not busy */ -+#define SDHCI_QUIRK_NO_TCIRQ_ON_NOT_BUSY (1<<15) - - int irq; /* Device IRQ */ - void __iomem * ioaddr; /* Mapped address */ -@@ -267,6 +270,14 @@ struct sdhci_host { +@@ -270,6 +271,14 @@ struct sdhci_ops { int (*enable_dma)(struct sdhci_host *host); @@ -96919,7 +96884,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 }; -@@ -274,6 +285,8 @@ extern struct sdhci_host *sdhci_alloc_ho +@@ -277,6 +286,8 @@ size_t priv_size); extern void sdhci_free_host(struct sdhci_host *host); @@ -96930,7 +96895,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 return (void *)host->private; --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c -@@ -391,6 +391,7 @@ static int sdhci_pci_enable_dma(struct s +@@ -392,6 +392,7 @@ static struct sdhci_ops sdhci_pci_ops = { .enable_dma = sdhci_pci_enable_dma, @@ -97271,7 +97236,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 + /* It seems we do not get an DATA transfer complete on non-busy + * transfers, not sure if this is a problem with this specific + * SDHCI block, or a missing configuration that needs to be set. */ -+ host->quirks |= SDHCI_QUIRK_NO_TCIRQ_ON_NOT_BUSY; ++ host->quirks |= SDHCI_QUIRK_NO_BUSY_IRQ; + + host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR | + SDHCI_QUIRK_32BIT_DMA_SIZE); @@ -97373,7 +97338,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #ifdef CONFIG_MTD_NAND_S3C2410_HWECC static int hardware_ecc = 1; -@@ -231,8 +231,6 @@ static int s3c2410_nand_setrate(struct s +@@ -231,8 +231,6 @@ BUG(); } @@ -97382,7 +97347,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 local_irq_save(flags); cfg = readl(info->regs + S3C2410_NFCONF); -@@ -240,6 +238,8 @@ static int s3c2410_nand_setrate(struct s +@@ -240,6 +238,8 @@ cfg |= set; writel(cfg, info->regs + S3C2410_NFCONF); @@ -97391,7 +97356,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 local_irq_restore(flags); return 0; -@@ -438,7 +438,7 @@ static int s3c2410_nand_correct_data(str +@@ -438,7 +438,7 @@ if ((diff0 & ~(1<mtd); } #else -@@ -684,9 +703,13 @@ static void s3c2410_nand_init_chip(struc +@@ -684,9 +703,13 @@ chip->select_chip = s3c2410_nand_select_chip; chip->chip_delay = 50; chip->priv = nmtd; @@ -97462,7 +97427,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 switch (info->cpu_type) { case TYPE_S3C2410: chip->IO_ADDR_W = regs + S3C2410_NFDATA; -@@ -726,7 +749,7 @@ static void s3c2410_nand_init_chip(struc +@@ -726,7 +749,7 @@ nmtd->mtd.owner = THIS_MODULE; nmtd->set = set; @@ -97473,7 +97438,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 chip->ecc.mode = NAND_ECC_HW; --- a/drivers/net/wireless/libertas/if_sdio.c +++ b/drivers/net/wireless/libertas/if_sdio.c -@@ -48,6 +48,7 @@ module_param_named(fw_name, lbs_fw_name, +@@ -48,6 +48,7 @@ static const struct sdio_device_id if_sdio_ids[] = { { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_LIBERTAS) }, @@ -97481,7 +97446,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 { /* end: all zeroes */ }, }; -@@ -72,7 +73,12 @@ static struct if_sdio_model if_sdio_mode +@@ -72,7 +73,12 @@ .helper = "sd8686_helper.bin", .firmware = "sd8686.bin", }, @@ -97508,7 +97473,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 peripherals to be configured by software, e.g. assign IRQ's or other --- a/drivers/pnp/resource.c +++ b/drivers/pnp/resource.c -@@ -436,6 +436,7 @@ int pnp_check_dma(struct pnp_dev *dev, s +@@ -436,6 +436,7 @@ } } @@ -97516,7 +97481,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* check if the resource is already in use, skip if the * device is active because it itself may be in use */ if (!dev->active) { -@@ -443,6 +444,7 @@ int pnp_check_dma(struct pnp_dev *dev, s +@@ -443,6 +444,7 @@ return 0; free_dma(*dma); } @@ -98287,7 +98252,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +MODULE_LICENSE("GPL"); --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig -@@ -68,4 +68,24 @@ config BATTERY_BQ27x00 +@@ -68,4 +68,24 @@ help Say Y here to enable support for batteries with BQ27200(I2C) chip. @@ -98314,7 +98279,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 + --- a/drivers/power/Makefile +++ b/drivers/power/Makefile -@@ -23,3 +23,9 @@ obj-$(CONFIG_BATTERY_OLPC) += olpc_batte +@@ -23,3 +23,9 @@ obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o obj-$(CONFIG_BATTERY_WM97XX) += wm97xx_battery.o obj-$(CONFIG_BATTERY_BQ27x00) += bq27x00_battery.o @@ -98744,7 +98709,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +MODULE_ALIAS("platform:pcf50633-mbc"); --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c -@@ -1113,6 +1113,7 @@ int regulator_disable(struct regulator * +@@ -1113,6 +1113,7 @@ if (!regulator->enabled) { printk(KERN_ERR "%s: not in use by this consumer\n", __func__); @@ -98754,7 +98719,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig -@@ -73,4 +73,10 @@ config REGULATOR_DA903X +@@ -73,4 +73,10 @@ Say y here to support the BUCKs and LDOs regulators found on Dialog Semiconductor DA9030/DA9034 PMIC. @@ -98767,7 +98732,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 endif --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile -@@ -11,5 +11,6 @@ obj-$(CONFIG_REGULATOR_BQ24022) += bq240 +@@ -11,5 +11,6 @@ obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o obj-$(CONFIG_REGULATOR_DA903X) += da903x.o @@ -99109,7 +99074,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +MODULE_ALIAS("platform:pcf50633-regulator"); --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig -@@ -219,6 +219,18 @@ config RTC_DRV_PCF8583 +@@ -219,6 +219,18 @@ This driver can also be built as a module. If so, the module will be called rtc-pcf8583. @@ -99130,7 +99095,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 help --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile -@@ -50,6 +50,8 @@ obj-$(CONFIG_RTC_DRV_MAX6902) += rtc-max +@@ -50,6 +50,8 @@ obj-$(CONFIG_RTC_DRV_OMAP) += rtc-omap.o obj-$(CONFIG_RTC_DRV_PCF8563) += rtc-pcf8563.o obj-$(CONFIG_RTC_DRV_PCF8583) += rtc-pcf8583.o @@ -99758,7 +99723,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 * of these rtc blocks in */ --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig -@@ -447,7 +447,7 @@ config SERIAL_CLPS711X_CONSOLE +@@ -447,7 +447,7 @@ config SERIAL_SAMSUNG tristate "Samsung SoC serial support" @@ -99767,7 +99732,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 select SERIAL_CORE help Support for the on-chip UARTs on the Samsung S3C24XX series CPUs, -@@ -455,6 +455,16 @@ config SERIAL_SAMSUNG +@@ -455,6 +455,16 @@ provide all of these ports, depending on how the serial port pins are configured. @@ -99784,7 +99749,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 config SERIAL_SAMSUNG_DEBUG bool "Samsung SoC serial debug" depends on SERIAL_SAMSUNG && DEBUG_LL -@@ -508,7 +518,20 @@ config SERIAL_S3C2440 +@@ -508,7 +518,20 @@ help Serial port support for the Samsung S3C2440 and S3C2442 SoC @@ -99808,7 +99773,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 bool "DECstation DZ serial driver" --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile -@@ -41,6 +41,8 @@ obj-$(CONFIG_SERIAL_S3C2400) += s3c2400. +@@ -41,6 +41,8 @@ obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o @@ -100144,7 +100109,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* macros to change one thing to another */ #define tx_enabled(port) ((port)->unused[0]) -@@ -136,8 +128,10 @@ static void s3c24xx_serial_rx_disable(st +@@ -136,8 +128,10 @@ static void s3c24xx_serial_stop_tx(struct uart_port *port) { @@ -100156,7 +100121,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 tx_enabled(port) = 0; if (port->flags & UPF_CONS_FLOW) s3c24xx_serial_rx_enable(port); -@@ -146,11 +140,13 @@ static void s3c24xx_serial_stop_tx(struc +@@ -146,11 +140,13 @@ static void s3c24xx_serial_start_tx(struct uart_port *port) { @@ -100171,7 +100136,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 tx_enabled(port) = 1; } } -@@ -158,9 +154,11 @@ static void s3c24xx_serial_start_tx(stru +@@ -158,9 +154,11 @@ static void s3c24xx_serial_stop_rx(struct uart_port *port) { @@ -100184,7 +100149,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 rx_enabled(port) = 0; } } -@@ -241,7 +239,7 @@ s3c24xx_serial_rx_chars(int irq, void *d +@@ -241,7 +239,7 @@ port->icount.rx++; if (unlikely(uerstat & S3C2410_UERSTAT_ANY)) { @@ -100193,7 +100158,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 ch, uerstat); /* check for break */ -@@ -384,13 +382,13 @@ static void s3c24xx_serial_shutdown(stru +@@ -384,13 +382,13 @@ struct s3c24xx_uart_port *ourport = to_ourport(port); if (ourport->tx_claimed) { @@ -100209,7 +100174,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 ourport->rx_claimed = 0; rx_enabled(port) = 0; } -@@ -407,12 +405,11 @@ static int s3c24xx_serial_startup(struct +@@ -407,12 +405,11 @@ rx_enabled(port) = 1; @@ -100224,7 +100189,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 return ret; } -@@ -422,12 +419,11 @@ static int s3c24xx_serial_startup(struct +@@ -422,12 +419,11 @@ tx_enabled(port) = 1; @@ -100239,7 +100204,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 goto err; } -@@ -452,6 +448,8 @@ static void s3c24xx_serial_pm(struct uar +@@ -452,6 +448,8 @@ { struct s3c24xx_uart_port *ourport = to_ourport(port); @@ -100248,7 +100213,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 switch (level) { case 3: if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL) -@@ -514,6 +512,7 @@ s3c24xx_serial_setsource(struct uart_por +@@ -514,6 +512,7 @@ struct baud_calc { struct s3c24xx_uart_clksrc *clksrc; unsigned int calc; @@ -100256,7 +100221,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 unsigned int quot; struct clk *src; }; -@@ -523,6 +522,7 @@ static int s3c24xx_serial_calcbaud(struc +@@ -523,6 +522,7 @@ struct s3c24xx_uart_clksrc *clksrc, unsigned int baud) { @@ -100264,7 +100229,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 unsigned long rate; calc->src = clk_get(port->dev, clksrc->name); -@@ -533,8 +533,24 @@ static int s3c24xx_serial_calcbaud(struc +@@ -533,8 +533,24 @@ rate /= clksrc->divisor; calc->clksrc = clksrc; @@ -100291,7 +100256,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 calc->quot--; return 1; -@@ -617,6 +633,30 @@ static unsigned int s3c24xx_serial_getcl +@@ -617,6 +633,30 @@ return best->quot; } @@ -100322,7 +100287,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static void s3c24xx_serial_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) -@@ -629,6 +669,7 @@ static void s3c24xx_serial_set_termios(s +@@ -629,6 +669,7 @@ unsigned int baud, quot; unsigned int ulcon; unsigned int umcon; @@ -100330,7 +100295,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* * We don't support modem control lines. -@@ -650,6 +691,7 @@ static void s3c24xx_serial_set_termios(s +@@ -650,6 +691,7 @@ /* check to see if we need to change clock source */ if (ourport->clksrc != clksrc || ourport->baudclk != clk) { @@ -100338,7 +100303,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 s3c24xx_serial_setsource(port, clksrc); if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) { -@@ -661,6 +703,14 @@ static void s3c24xx_serial_set_termios(s +@@ -661,6 +703,14 @@ ourport->clksrc = clksrc; ourport->baudclk = clk; @@ -100353,7 +100318,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } switch (termios->c_cflag & CSIZE) { -@@ -702,12 +752,16 @@ static void s3c24xx_serial_set_termios(s +@@ -702,12 +752,16 @@ spin_lock_irqsave(&port->lock, flags); @@ -100371,7 +100336,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n", rd_regl(port, S3C2410_ULCON), rd_regl(port, S3C2410_UCON), -@@ -752,6 +806,8 @@ static const char *s3c24xx_serial_type(s +@@ -752,6 +806,8 @@ return "S3C2440"; case PORT_S3C2412: return "S3C2412"; @@ -100380,7 +100345,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 default: return NULL; } -@@ -827,14 +883,14 @@ static struct uart_ops s3c24xx_serial_op +@@ -827,14 +883,14 @@ static struct uart_driver s3c24xx_uart_drv = { .owner = THIS_MODULE, .dev_name = "s3c2410_serial", @@ -100397,7 +100362,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 [0] = { .port = { .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[0].port.lock), -@@ -859,7 +915,7 @@ static struct s3c24xx_uart_port s3c24xx_ +@@ -859,7 +915,7 @@ .line = 1, } }, @@ -100406,7 +100371,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 [2] = { .port = { -@@ -872,10 +928,88 @@ static struct s3c24xx_uart_port s3c24xx_ +@@ -872,10 +928,88 @@ .flags = UPF_BOOT_AUTOCONF, .line = 2, } @@ -100495,7 +100460,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* s3c24xx_serial_resetport * * wrapper to call the specific reset for this port (reset the fifos -@@ -890,6 +1024,93 @@ static inline int s3c24xx_serial_resetpo +@@ -890,6 +1024,93 @@ return (info->reset_port)(port, cfg); } @@ -100589,7 +100554,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* s3c24xx_serial_init_port * * initialise a single serial port from the platform device given -@@ -914,8 +1135,11 @@ static int s3c24xx_serial_init_port(stru +@@ -914,8 +1135,11 @@ if (port->mapbase != 0) return 0; @@ -100603,7 +100568,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* setup info for port */ port->dev = &platdev->dev; -@@ -943,18 +1167,26 @@ static int s3c24xx_serial_init_port(stru +@@ -943,18 +1167,26 @@ dbg("resource %p (%lx..%lx)\n", res, res->start, res->end); @@ -100635,7 +100600,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* reset the fifos (and setup the uart) */ s3c24xx_serial_resetport(port, cfg); -@@ -987,6 +1219,7 @@ int s3c24xx_serial_probe(struct platform +@@ -987,6 +1219,7 @@ ourport = &s3c24xx_serial_ports[probe_index]; probe_index++; @@ -100643,7 +100608,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 dbg("%s: initialising port %p...\n", __func__, ourport); -@@ -1002,6 +1235,10 @@ int s3c24xx_serial_probe(struct platform +@@ -1002,6 +1235,10 @@ if (ret < 0) printk(KERN_ERR "%s: failed to add clksrc attr.\n", __func__); @@ -100654,7 +100619,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 return 0; probe_err: -@@ -1015,6 +1252,7 @@ int s3c24xx_serial_remove(struct platfor +@@ -1015,6 +1252,7 @@ struct uart_port *port = s3c24xx_dev_to_port(&dev->dev); if (port) { @@ -100662,7 +100627,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 device_remove_file(&dev->dev, &dev_attr_clock_source); uart_remove_one_port(&s3c24xx_uart_drv, port); } -@@ -1038,6 +1276,16 @@ static int s3c24xx_serial_suspend(struct +@@ -1038,6 +1276,16 @@ return 0; } @@ -100679,7 +100644,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static int s3c24xx_serial_resume(struct platform_device *dev) { struct uart_port *port = s3c24xx_dev_to_port(&dev->dev); -@@ -1049,6 +1297,9 @@ static int s3c24xx_serial_resume(struct +@@ -1049,6 +1297,9 @@ clk_disable(ourport->clk); uart_resume_port(&s3c24xx_uart_drv, port); @@ -100689,7 +100654,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } return 0; -@@ -1059,6 +1310,12 @@ int s3c24xx_serial_init(struct platform_ +@@ -1059,6 +1310,12 @@ struct s3c24xx_uart_info *info) { dbg("s3c24xx_serial_init(%p,%p)\n", drv, info); @@ -100702,7 +100667,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #ifdef CONFIG_PM drv->suspend = s3c24xx_serial_suspend; -@@ -1098,6 +1355,13 @@ module_exit(s3c24xx_serial_modexit); +@@ -1098,6 +1355,13 @@ #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE static struct uart_port *cons_uart; @@ -100716,7 +100681,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static int s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon) -@@ -1122,9 +1386,21 @@ static void +@@ -1122,9 +1386,21 @@ s3c24xx_serial_console_putchar(struct uart_port *port, int ch) { unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON); @@ -100738,7 +100703,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } static void -@@ -1219,7 +1495,7 @@ static int s3c24xx_serial_init_ports(str +@@ -1219,7 +1495,7 @@ platdev_ptr = s3c24xx_uart_devs; @@ -100747,7 +100712,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 s3c24xx_serial_init_port(ptr, info, *platdev_ptr); } -@@ -1240,7 +1516,7 @@ s3c24xx_serial_console_setup(struct cons +@@ -1240,7 +1516,7 @@ /* is this a valid port */ @@ -100767,7 +100732,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 struct s3c24xx_uart_info { char *name; unsigned int type; -@@ -21,6 +23,10 @@ struct s3c24xx_uart_info { +@@ -21,6 +23,10 @@ unsigned long tx_fifoshift; unsigned long tx_fifofull; @@ -100778,7 +100743,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* clock source control */ int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk); -@@ -33,12 +39,23 @@ struct s3c24xx_uart_info { +@@ -33,12 +39,23 @@ struct s3c24xx_uart_port { unsigned char rx_claimed; unsigned char tx_claimed; @@ -100815,7 +100780,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 struct s3c24xx_spi { --- a/drivers/spi/spi_s3c24xx_gpio.c +++ b/drivers/spi/spi_s3c24xx_gpio.c -@@ -91,7 +91,7 @@ static void s3c2410_spigpio_chipselect(s +@@ -91,7 +91,7 @@ struct s3c2410_spigpio *sg = spidev_to_sg(dev); if (sg->info && sg->info->chip_select) @@ -100824,7 +100789,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } static int s3c2410_spigpio_probe(struct platform_device *dev) -@@ -100,6 +100,7 @@ static int s3c2410_spigpio_probe(struct +@@ -100,6 +100,7 @@ struct spi_master *master; struct s3c2410_spigpio *sp; int ret; @@ -100832,7 +100797,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 master = spi_alloc_master(&dev->dev, sizeof(struct s3c2410_spigpio)); if (master == NULL) { -@@ -112,9 +113,11 @@ static int s3c2410_spigpio_probe(struct +@@ -112,9 +113,11 @@ platform_set_drvdata(dev, sp); @@ -100845,7 +100810,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* setup spi bitbang adaptor */ sp->bitbang.master = spi_master_get(master); sp->bitbang.master->bus_num = info->bus_num; -@@ -143,6 +146,22 @@ static int s3c2410_spigpio_probe(struct +@@ -143,6 +146,22 @@ if (ret) goto err_no_bitbang; @@ -100870,7 +100835,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 err_no_bitbang: --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c -@@ -1045,7 +1045,11 @@ composite_resume(struct usb_gadget *gadg +@@ -1045,7 +1045,11 @@ /*-------------------------------------------------------------------------*/ static struct usb_gadget_driver composite_driver = { @@ -100884,7 +100849,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 .unbind = __exit_p(composite_unbind), --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c -@@ -122,11 +122,16 @@ static inline bool has_rndis(void) +@@ -122,11 +122,16 @@ * Instead: allocate your own, using normal USB-IF procedures. */ @@ -100901,7 +100866,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* For hardware that can't talk CDC, we use the same vendor ID that * ARM Linux has used for ethernet-over-usb, both with sa1100 and -@@ -147,8 +152,8 @@ static inline bool has_rndis(void) +@@ -147,8 +152,8 @@ * used with CDC Ethernet, Linux 2.4 hosts will need updates to choose * the non-RNDIS configuration. */ @@ -100925,7 +100890,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include "s3c2410_udc.h" -@@ -134,6 +134,8 @@ static int dprintk(int level, const char +@@ -134,6 +134,8 @@ return 0; } #endif @@ -100934,7 +100899,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static int s3c2410_udc_debugfs_seq_show(struct seq_file *m, void *p) { u32 addr_reg,pwr_reg,ep_int_reg,usb_int_reg; -@@ -197,6 +199,7 @@ static const struct file_operations s3c2 +@@ -197,6 +199,7 @@ .release = single_release, .owner = THIS_MODULE, }; @@ -100942,7 +100907,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* io macros */ -@@ -843,6 +846,7 @@ static void s3c2410_udc_handle_ep(struct +@@ -843,6 +846,7 @@ u32 ep_csr1; u32 idx; @@ -100950,7 +100915,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 if (likely (!list_empty(&ep->queue))) req = list_entry(ep->queue.next, struct s3c2410_request, queue); -@@ -882,6 +886,8 @@ static void s3c2410_udc_handle_ep(struct +@@ -882,6 +886,8 @@ if ((ep_csr1 & S3C2410_UDC_OCSR1_PKTRDY) && req) { s3c2410_udc_read_fifo(ep,req); @@ -100959,7 +100924,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } } } -@@ -1890,6 +1896,7 @@ static int s3c2410_udc_probe(struct plat +@@ -1890,6 +1896,7 @@ udc->vbus = 1; } @@ -100967,7 +100932,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 if (s3c2410_udc_debugfs_root) { udc->regs_info = debugfs_create_file("registers", S_IRUGO, s3c2410_udc_debugfs_root, -@@ -1897,6 +1904,7 @@ static int s3c2410_udc_probe(struct plat +@@ -1897,6 +1904,7 @@ if (!udc->regs_info) dev_warn(dev, "debugfs file creation failed\n"); } @@ -100975,7 +100940,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 dev_dbg(dev, "probe ok\n"); -@@ -2003,12 +2011,14 @@ static int __init udc_init(void) +@@ -2003,12 +2011,14 @@ dprintk(DEBUG_NORMAL, "%s: version %s\n", gadget_name, DRIVER_VERSION); @@ -101000,7 +100965,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #define valid_port(idx) ((idx) == 1 || (idx) == 2) -@@ -308,6 +309,42 @@ static void s3c2410_hcd_oc(struct s3c241 +@@ -308,6 +309,42 @@ local_irq_restore(flags); } @@ -101043,7 +101008,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* may be called without controller electrically present */ /* may be called with controller, bus, and devices active */ -@@ -325,6 +362,7 @@ static void s3c2410_hcd_oc(struct s3c241 +@@ -325,6 +362,7 @@ static void usb_hcd_s3c2410_remove (struct usb_hcd *hcd, struct platform_device *dev) { @@ -101051,7 +101016,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 usb_remove_hcd(hcd); s3c2410_stop_hc(dev); iounmap(hcd->regs); -@@ -392,8 +430,15 @@ static int usb_hcd_s3c2410_probe (const +@@ -392,8 +430,15 @@ if (retval != 0) goto err_ioremap; @@ -101341,7 +101306,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +MODULE_LICENSE("GPL"); --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig -@@ -152,6 +152,13 @@ config BACKLIGHT_OMAP1 +@@ -152,6 +152,13 @@ the PWL module of OMAP1 processors. Say Y if your board uses this hardware. @@ -101357,7 +101322,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 depends on BACKLIGHT_CLASS_DEVICE && SH_HP6XX --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile -@@ -12,6 +12,7 @@ obj-$(CONFIG_LCD_TOSA) += tosa_lcd.o +@@ -12,6 +12,7 @@ obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o obj-$(CONFIG_BACKLIGHT_ATMEL_PWM) += atmel-pwm-bl.o obj-$(CONFIG_BACKLIGHT_CORGI) += corgi_bl.o @@ -101367,7 +101332,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 obj-$(CONFIG_BACKLIGHT_OMAP1) += omap1_bl.o --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c -@@ -401,6 +401,9 @@ static void fb_flashcursor(struct work_s +@@ -401,6 +401,9 @@ int c; int mode; @@ -101377,7 +101342,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 acquire_console_sem(); if (ops && ops->currcon != -1) vc = vc_cons[ops->currcon].d; -@@ -3225,13 +3228,17 @@ static void fbcon_get_requirement(struct +@@ -3225,13 +3228,17 @@ static int fbcon_event_notify(struct notifier_block *self, unsigned long action, void *data) { @@ -102211,7 +102176,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +module_exit(jbt_exit); --- a/drivers/video/display/Kconfig +++ b/drivers/video/display/Kconfig -@@ -21,4 +21,15 @@ config DISPLAY_SUPPORT +@@ -21,4 +21,15 @@ comment "Display hardware drivers" depends on DISPLAY_SUPPORT @@ -102237,7 +102202,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig -@@ -1918,6 +1918,30 @@ config FB_TMIO_ACCELL +@@ -1918,6 +1918,30 @@ depends on FB_TMIO default y @@ -102270,7 +102235,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 depends on FB && ARCH_S3C2410 --- a/drivers/video/logo/Kconfig +++ b/drivers/video/logo/Kconfig -@@ -77,6 +77,11 @@ config LOGO_SUPERH_CLUT224 +@@ -77,6 +77,11 @@ depends on SUPERH default y @@ -102284,7 +102249,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 depends on M32R --- a/drivers/video/logo/logo.c +++ b/drivers/video/logo/logo.c -@@ -35,6 +35,7 @@ extern const struct linux_logo logo_supe +@@ -35,6 +35,7 @@ extern const struct linux_logo logo_superh_vga16; extern const struct linux_logo logo_superh_clut224; extern const struct linux_logo logo_m32r_clut224; @@ -102292,7 +102257,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 static int nologo; module_param(nologo, bool, 0); -@@ -115,6 +116,10 @@ const struct linux_logo * __init_refok f +@@ -115,6 +116,10 @@ /* M32R Linux logo */ logo = &logo_m32r_clut224; #endif @@ -142311,7 +142276,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 --- a/drivers/video/logo/Makefile +++ b/drivers/video/logo/Makefile -@@ -15,6 +15,7 @@ obj-$(CONFIG_LOGO_SUPERH_MONO) += logo_ +@@ -15,6 +15,7 @@ obj-$(CONFIG_LOGO_SUPERH_VGA16) += logo_superh_vga16.o obj-$(CONFIG_LOGO_SUPERH_CLUT224) += logo_superh_clut224.o obj-$(CONFIG_LOGO_M32R_CLUT224) += logo_m32r_clut224.o @@ -142321,7 +142286,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile -@@ -109,6 +109,7 @@ obj-$(CONFIG_FB_METRONOME) += met +@@ -109,6 +109,7 @@ obj-$(CONFIG_FB_S1D13XXX) += s1d13xxxfb.o obj-$(CONFIG_FB_SH7760) += sh7760fb.o obj-$(CONFIG_FB_IMX) += imxfb.o @@ -142331,7 +142296,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 obj-$(CONFIG_FB_COBALT) += cobalt_lcdfb.o --- a/drivers/video/s3c2410fb.c +++ b/drivers/video/s3c2410fb.c -@@ -1017,6 +1017,8 @@ static int s3c2410fb_resume(struct platf +@@ -1017,6 +1017,8 @@ s3c2410fb_init_registers(fbinfo); @@ -143381,7 +143346,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +MODULE_ALIAS("platform:s3c-fb"); --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig -@@ -233,6 +233,12 @@ config ORION5X_WATCHDOG +@@ -233,6 +233,12 @@ To compile this driver as a module, choose M here: the module will be called orion5x_wdt. @@ -143394,7 +143359,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 # ARM26 Architecture # AVR32 Architecture -@@ -784,7 +790,7 @@ config WATCHDOG_RTAS +@@ -784,7 +790,7 @@ tristate "RTAS watchdog" depends on PPC_RTAS help @@ -143405,7 +143370,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 will be called wdrtas. --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile -@@ -41,6 +41,7 @@ obj-$(CONFIG_PNX4008_WATCHDOG) += pnx400 +@@ -41,6 +41,7 @@ obj-$(CONFIG_IOP_WATCHDOG) += iop_wdt.o obj-$(CONFIG_DAVINCI_WATCHDOG) += davinci_wdt.o obj-$(CONFIG_ORION5X_WATCHDOG) += orion5x_wdt.o @@ -143642,7 +143607,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 --- a/fs/jffs2/background.c +++ b/fs/jffs2/background.c -@@ -95,13 +95,17 @@ static int jffs2_garbage_collect_thread( +@@ -95,13 +95,17 @@ spin_unlock(&c->erase_completion_lock); @@ -145081,7 +145046,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +#endif --- a/include/linux/device.h +++ b/include/linux/device.h -@@ -48,6 +48,11 @@ extern int __must_check bus_create_file( +@@ -48,6 +48,11 @@ struct bus_attribute *); extern void bus_remove_file(struct bus_type *, struct bus_attribute *); @@ -145095,7 +145060,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 struct bus_attribute *bus_attrs; --- a/include/linux/fb.h +++ b/include/linux/fb.h -@@ -123,6 +123,7 @@ struct dentry; +@@ -123,6 +123,7 @@ #define FB_ACCEL_TRIDENT_3DIMAGE 51 /* Trident 3DImage */ #define FB_ACCEL_TRIDENT_BLADE3D 52 /* Trident Blade3D */ #define FB_ACCEL_TRIDENT_BLADEXP 53 /* Trident BladeXP */ @@ -145305,7 +145270,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +#endif --- a/include/linux/kernel.h +++ b/include/linux/kernel.h -@@ -225,6 +225,8 @@ extern struct ratelimit_state printk_rat +@@ -225,6 +225,8 @@ extern int printk_ratelimit(void); extern bool printk_timed_ratelimit(unsigned long *caller_jiffies, unsigned int interval_msec); @@ -146816,7 +146781,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 + --- a/include/linux/mmc/core.h +++ b/include/linux/mmc/core.h -@@ -129,6 +129,8 @@ struct mmc_request { +@@ -129,6 +129,8 @@ struct mmc_host; struct mmc_card; @@ -146838,7 +146803,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #endif --- a/include/linux/mm.h +++ b/include/linux/mm.h -@@ -713,7 +713,7 @@ static inline int shmem_lock(struct file +@@ -713,7 +713,7 @@ } #endif struct file *shmem_file_setup(char *name, loff_t size, unsigned long flags); @@ -147778,7 +147743,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +#endif --- a/include/linux/suspend.h +++ b/include/linux/suspend.h -@@ -146,6 +146,12 @@ struct pbe { +@@ -146,6 +146,12 @@ struct pbe *next; }; @@ -148037,7 +148002,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +#endif --- a/include/linux/vt.h +++ b/include/linux/vt.h -@@ -18,8 +18,19 @@ extern int unregister_vt_notifier(struct +@@ -18,8 +18,19 @@ * resizing). */ #define MIN_NR_CONSOLES 1 /* must be at least 1 */ @@ -148059,7 +148024,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h -@@ -244,6 +244,13 @@ int snd_soc_dapm_nc_pin(struct snd_soc_c +@@ -244,6 +244,13 @@ int snd_soc_dapm_get_pin_status(struct snd_soc_codec *codec, char *pin); int snd_soc_dapm_sync(struct snd_soc_codec *codec); @@ -148075,7 +148040,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 snd_soc_dapm_input = 0, /* input pin */ --- a/init/Kconfig +++ b/init/Kconfig -@@ -732,6 +732,15 @@ config AIO +@@ -732,6 +732,15 @@ by some high performance threaded applications. Disabling this option saves about 7k. @@ -148093,7 +148058,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 bool "Enable VM event counters for /proc/vmstat" if EMBEDDED --- a/kernel/irq/chip.c +++ b/kernel/irq/chip.c -@@ -380,6 +380,7 @@ handle_level_irq(unsigned int irq, struc +@@ -380,6 +380,7 @@ out_unlock: spin_unlock(&desc->lock); } @@ -148101,7 +148066,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /** * handle_fasteoi_irq - irq handler for transparent controllers -@@ -583,6 +584,7 @@ __set_irq_handler(unsigned int irq, irq_ +@@ -583,6 +584,7 @@ } spin_unlock_irqrestore(&desc->lock, flags); } @@ -148111,7 +148076,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 set_irq_chip_and_handler(unsigned int irq, struct irq_chip *chip, --- a/kernel/power/main.c +++ b/kernel/power/main.c -@@ -132,6 +132,9 @@ static inline int suspend_test(int level +@@ -132,6 +132,9 @@ #endif /* CONFIG_PM_SLEEP */ @@ -148121,7 +148086,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #ifdef CONFIG_SUSPEND #ifdef CONFIG_PM_TEST_SUSPEND -@@ -322,6 +325,8 @@ int suspend_devices_and_enter(suspend_st +@@ -322,6 +325,8 @@ if (!suspend_ops) return -ENOSYS; @@ -148130,7 +148095,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 if (suspend_ops->begin) { error = suspend_ops->begin(state); if (error) -@@ -365,6 +370,8 @@ int suspend_devices_and_enter(suspend_st +@@ -365,6 +370,8 @@ Close: if (suspend_ops->end) suspend_ops->end(); @@ -148139,7 +148104,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 return error; Recover_platform: -@@ -427,6 +434,8 @@ static int enter_state(suspend_state_t s +@@ -427,6 +434,8 @@ return -EBUSY; printk(KERN_INFO "PM: Syncing filesystems ... "); @@ -148162,7 +148127,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* * Architectures can override it: -@@ -67,6 +70,12 @@ int console_printk[4] = { +@@ -67,6 +70,12 @@ int oops_in_progress; EXPORT_SYMBOL(oops_in_progress); @@ -148175,7 +148140,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* * console_sem protects the console_drivers list, and also * provides serialisation for access to the entire console -@@ -667,8 +676,39 @@ asmlinkage int vprintk(const char *fmt, +@@ -667,8 +676,39 @@ /* Emit the output into the temporary buffer */ printed_len += vscnprintf(printk_buf + printed_len, sizeof(printk_buf) - printed_len, fmt, args); @@ -148219,7 +148184,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 * appropriate log level tags, we insert them here --- a/kernel/timer.c +++ b/kernel/timer.c -@@ -813,7 +813,11 @@ static int cascade(struct tvec_base *bas +@@ -813,7 +813,11 @@ * don't have to detach them individually. */ list_for_each_entry_safe(timer, tmp, &tv_list, entry) { @@ -148234,7 +148199,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 --- a/MAINTAINERS +++ b/MAINTAINERS -@@ -1705,6 +1705,20 @@ FILE LOCKING (flock() and fcntl()/lockf( +@@ -1705,6 +1705,20 @@ P: Matthew Wilcox M: matthew@wil.cx L: linux-fsdevel@vger.kernel.org @@ -148937,7 +148902,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 +MODULE_LICENSE("GPL"); --- a/mm/Makefile +++ b/mm/Makefile -@@ -22,6 +22,7 @@ obj-$(CONFIG_NUMA) += mempolicy.o +@@ -22,6 +22,7 @@ obj-$(CONFIG_SPARSEMEM) += sparse.o obj-$(CONFIG_SPARSEMEM_VMEMMAP) += sparse-vmemmap.o obj-$(CONFIG_SHMEM) += shmem.o @@ -148947,7 +148912,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 obj-$(CONFIG_SLOB) += slob.o --- a/mm/tiny-shmem.c +++ b/mm/tiny-shmem.c -@@ -97,6 +97,22 @@ put_memory: +@@ -97,6 +97,22 @@ } EXPORT_SYMBOL_GPL(shmem_file_setup); @@ -148970,7 +148935,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /** * shmem_zero_setup - setup a shared anonymous mapping * @vma: the vma to be mmapped is prepared by do_mmap_pgoff -@@ -110,10 +126,8 @@ int shmem_zero_setup(struct vm_area_stru +@@ -110,10 +126,8 @@ if (IS_ERR(file)) return PTR_ERR(file); @@ -149006,7 +148971,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 + --- a/scripts/mkuboot.sh +++ b/scripts/mkuboot.sh -@@ -11,7 +11,7 @@ if [ -z "${MKIMAGE}" ]; then +@@ -11,7 +11,7 @@ if [ -z "${MKIMAGE}" ]; then # Doesn't exist echo '"mkimage" command not found - U-Boot images will not be built' >&2 @@ -149017,7 +148982,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 --- a/sound/soc/codecs/wm8753.c +++ b/sound/soc/codecs/wm8753.c -@@ -1584,6 +1584,9 @@ static int wm8753_init(struct snd_soc_de +@@ -1584,6 +1584,9 @@ schedule_delayed_work(&codec->delayed_work, msecs_to_jiffies(caps_charge)); @@ -149027,7 +148992,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /* set the update bits */ reg = wm8753_read_reg_cache(codec, WM8753_LDAC); wm8753_write(codec, WM8753_LDAC, reg | 0x0100); -@@ -1644,17 +1647,20 @@ static int wm8753_i2c_probe(struct i2c_c +@@ -1644,17 +1647,20 @@ struct snd_soc_codec *codec = socdev->codec; int ret; @@ -149050,7 +149015,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 { struct snd_soc_codec *codec = i2c_get_clientdata(client); kfree(codec->reg_cache); -@@ -1675,6 +1681,7 @@ static struct i2c_driver wm8753_i2c_driv +@@ -1675,6 +1681,7 @@ .probe = wm8753_i2c_probe, .remove = wm8753_i2c_remove, .id_table = wm8753_i2c_id, @@ -149058,7 +149023,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 }; static int wm8753_add_i2c_device(struct platform_device *pdev, -@@ -1716,6 +1723,8 @@ err_driver: +@@ -1716,6 +1723,8 @@ i2c_del_driver(&wm8753_i2c_driver); return -ENODEV; } @@ -149067,7 +149032,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #endif #if defined(CONFIG_SPI_MASTER) -@@ -1783,7 +1792,7 @@ static int wm8753_probe(struct platform_ +@@ -1783,7 +1792,7 @@ struct wm8753_priv *wm8753; int ret = 0; @@ -149076,7 +149041,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 setup = socdev->codec_data; codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); -@@ -1820,6 +1829,7 @@ static int wm8753_probe(struct platform_ +@@ -1820,6 +1829,7 @@ #endif if (ret != 0) { @@ -149084,7 +149049,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 kfree(codec->private_data); kfree(codec); } -@@ -1857,7 +1867,6 @@ static int wm8753_remove(struct platform +@@ -1857,7 +1867,6 @@ snd_soc_free_pcms(socdev); snd_soc_dapm_free(socdev); #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) @@ -149094,7 +149059,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #if defined(CONFIG_SPI_MASTER) --- a/sound/soc/s3c24xx/Kconfig +++ b/sound/soc/s3c24xx/Kconfig -@@ -26,6 +26,15 @@ config SND_S3C24XX_SOC_NEO1973_WM8753 +@@ -26,6 +26,15 @@ Say Y if you want to add support for SoC audio on smdk2440 with the WM8753. @@ -149112,7 +149077,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 depends on SND_S3C24XX_SOC && MACH_SMDK2443 --- a/sound/soc/s3c24xx/Makefile +++ b/sound/soc/s3c24xx/Makefile -@@ -13,7 +13,10 @@ obj-$(CONFIG_SND_S3C2412_SOC_I2S) += snd +@@ -13,7 +13,10 @@ snd-soc-neo1973-wm8753-objs := neo1973_wm8753.o snd-soc-smdk2443-wm9710-objs := smdk2443_wm9710.o snd-soc-ln2440sbc-alc650-objs := ln2440sbc_alc650.o @@ -149810,7 +149775,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include #include "../codecs/wm8753.h" -@@ -585,7 +585,7 @@ static struct snd_soc_machine neo1973 = +@@ -585,7 +585,7 @@ .num_links = ARRAY_SIZE(neo1973_dai), }; @@ -149819,7 +149784,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 .i2c_bus = 0, .i2c_address = 0x1a, }; -@@ -594,7 +594,7 @@ static struct snd_soc_device neo1973_snd +@@ -594,7 +594,7 @@ .machine = &neo1973, .platform = &s3c24xx_soc_platform, .codec_dev = &soc_codec_dev_wm8753, @@ -149828,7 +149793,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 }; static int lm4857_i2c_probe(struct i2c_client *client, -@@ -676,7 +676,7 @@ static int __init neo1973_init(void) +@@ -676,7 +676,7 @@ { int ret; @@ -149850,7 +149815,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 #include --- a/sound/soc/s3c24xx/s3c24xx-i2s.c +++ b/sound/soc/s3c24xx/s3c24xx-i2s.c -@@ -175,7 +175,7 @@ static void s3c24xx_snd_rxctrl(int on) +@@ -175,7 +175,7 @@ static int s3c24xx_snd_lrsync(void) { u32 iiscon; @@ -149859,7 +149824,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 DBG("Entered %s\n", __func__); -@@ -282,11 +282,14 @@ static int s3c24xx_i2s_trigger(struct sn +@@ -282,11 +282,14 @@ case SNDRV_PCM_TRIGGER_START: case SNDRV_PCM_TRIGGER_RESUME: case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: @@ -149879,7 +149844,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) s3c24xx_snd_rxctrl(1); -@@ -306,7 +309,6 @@ static int s3c24xx_i2s_trigger(struct sn +@@ -306,7 +309,6 @@ break; } @@ -149889,7 +149854,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 --- a/sound/soc/s3c24xx/s3c24xx-pcm.c +++ b/sound/soc/s3c24xx/s3c24xx-pcm.c -@@ -168,7 +168,7 @@ static int s3c24xx_pcm_hw_params(struct +@@ -168,7 +168,7 @@ prtd->params->client, NULL); if (ret < 0) { @@ -149900,7 +149865,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c -@@ -1003,6 +1003,38 @@ static ssize_t codec_reg_show(struct dev +@@ -1003,6 +1003,38 @@ } static DEVICE_ATTR(codec_reg, 0444, codec_reg_show, NULL); @@ -149939,7 +149904,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 /** * snd_soc_new_ac97_codec - initailise AC97 device * @codec: audio codec -@@ -1218,6 +1250,9 @@ int snd_soc_register_card(struct snd_soc +@@ -1218,6 +1250,9 @@ mutex_unlock(&codec->mutex); @@ -149951,7 +149916,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009 } --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c -@@ -1525,6 +1525,56 @@ int snd_soc_dapm_get_pin_status(struct s +@@ -1525,6 +1525,56 @@ EXPORT_SYMBOL_GPL(snd_soc_dapm_get_pin_status); /**