From: Michal Simek Date: Thu, 12 Apr 2018 15:39:46 +0000 (+0200) Subject: arm: zynqmp: Add ZynqMP minimal R5 support X-Git-Tag: v2018.07-rc1~159^2~8 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=1d6c54ecb39b8591a98f02f9b47af225ff07cd0b;p=oweals%2Fu-boot.git arm: zynqmp: Add ZynqMP minimal R5 support Xilinx ZynqMP also contains dual Cortex R5 which can run U-Boot. This patch is adding minimal support to get U-Boot boot. U-Boot on R5 runs out of DDR with default configuration that's why DDR needs to be partitioned if there is something else running on arm64. Console is done via Cadence uart driver and the first Cadence Triple Timer Counter is used for time. This configuration with uart1 was tested on zcu100-revC. U-Boot 2018.05-rc2-00021-gd058a08d907d (Apr 18 2018 - 14:11:27 +0200) Model: Xilinx ZynqMP R5 DRAM: 512 MiB WARNING: Caches not enabled MMC: In: serial@ff010000 Out: serial@ff010000 Err: serial@ff010000 Net: Net Initialization Skipped No ethernet found. ZynqMP r5> There are two ways how to run this on ZynqMP. 1. Run from ZynqMP arm64 tftpb 20000000 u-boot-r5.elf setenv autostart no && bootelf -p 20000000 cpu 4 disable && cpu 4 release 10000000 lockstep or cpu 4 disable && cpu 4 release 10000000 split 2. Load via jtag when directly to R5 Signed-off-by: Michal Simek --- diff --git a/MAINTAINERS b/MAINTAINERS index c2ae68c999..5670917b41 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -295,6 +295,12 @@ F: include/zynqmppl.h F: tools/zynqmp* N: zynqmp +ARM ZYNQMP R5 +M: Michal Simek +S: Maintained +T: git git://git.denx.de/u-boot-microblaze.git +F: arch/arm/mach-zynqmp-r5/ + BUILDMAN M: Simon Glass S: Maintained diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a7618f9ff2..c9d6e0a424 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -823,6 +823,14 @@ config ARCH_ZYNQ imply CMD_SPL imply ARCH_EARLY_INIT_R +config ARCH_ZYNQMP_R5 + bool "Xilinx ZynqMP R5 based platform" + select CPU_V7R + select OF_CONTROL + select DM + select DM_SERIAL + select CLK + config ARCH_ZYNQMP bool "Xilinx ZynqMP based platform" select ARM64 @@ -1345,6 +1353,8 @@ source "arch/arm/cpu/armv7/vf610/Kconfig" source "arch/arm/mach-zynq/Kconfig" +source "arch/arm/mach-zynqmp-r5/Kconfig" + source "arch/arm/cpu/armv7/Kconfig" source "arch/arm/cpu/armv8/zynqmp/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 3b1dd85716..4d6d276137 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -76,6 +76,7 @@ machine-$(CONFIG_ARCH_STM32MP) += stm32mp machine-$(CONFIG_TEGRA) += tegra machine-$(CONFIG_ARCH_UNIPHIER) += uniphier machine-$(CONFIG_ARCH_ZYNQ) += zynq +machine-$(CONFIG_ARCH_ZYNQMP_R5) += zynqmp-r5 machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y)) diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index f7f24365bb..f94940a7dd 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -163,6 +163,8 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += \ zynqmp-zc1751-xm017-dc3.dtb \ zynqmp-zc1751-xm018-dc4.dtb \ zynqmp-zc1751-xm019-dc5.dtb +dtb-$(CONFIG_ARCH_ZYNQMP_R5) += \ + zynqmp-r5.dtb dtb-$(CONFIG_AM33XX) += am335x-boneblack.dtb am335x-bone.dtb \ am335x-draco.dtb \ am335x-evm.dtb \ diff --git a/arch/arm/dts/zynqmp-r5.dts b/arch/arm/dts/zynqmp-r5.dts new file mode 100644 index 0000000000..a72172ef2e --- /dev/null +++ b/arch/arm/dts/zynqmp-r5.dts @@ -0,0 +1,73 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Xilinx ZynqMP R5 + * + * (C) Copyright 2018, Xilinx, Inc. + * + * Michal Simek + */ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xlnx,zynqmp-r5"; + model = "Xilinx ZynqMP R5"; + + cpus { + #address-cells = <0x1>; + #size-cells = <0x0>; + + cpu@0 { + compatible = "arm,cortex-r5"; + device_type = "cpu"; + reg = <0>; + }; + }; + + aliases { + serial0 = &uart1; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = ""; + stdout-path = "serial0:115200n8"; + }; + + clk100: clk100 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + u-boot,dm-pre-reloc; + }; + + amba { + u-boot,dm-pre-reloc; + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ttc0: timer@ff110000 { + compatible = "cdns,ttc"; + status = "okay"; + reg = <0xff110000 0x1000>; + timer-width = <32>; + clocks = <&clk100>; + }; + + uart1: serial@ff010000 { + u-boot,dm-pre-reloc; + compatible = "cdns,uart-r1p12", "xlnx,xuartps"; + reg = <0xff010000 0x1000>; + clock-names = "uart_clk", "pclk"; + clocks = <&clk100 &clk100>; + }; + }; +}; diff --git a/arch/arm/mach-zynqmp-r5/Kconfig b/arch/arm/mach-zynqmp-r5/Kconfig new file mode 100644 index 0000000000..5e01754133 --- /dev/null +++ b/arch/arm/mach-zynqmp-r5/Kconfig @@ -0,0 +1,27 @@ +# SPDX-License-Identifier: GPL-2.0 + +if ARCH_ZYNQMP_R5 + +config SYS_BOARD + string "Board name" + default "zynqmp_r5" + +config SYS_VENDOR + string "Vendor name" + default "xilinx" + +config SYS_SOC + default "zynqmp-r5" + +config SYS_CONFIG_NAME + string "Board configuration name" + default "xilinx_zynqmp_r5" + help + This option contains information about board configuration name. + Based on this option include/configs/.h header + will be used for board configuration. + +config SYS_MALLOC_F_LEN + default 0x600 + +endif diff --git a/arch/arm/mach-zynqmp-r5/Makefile b/arch/arm/mach-zynqmp-r5/Makefile new file mode 100644 index 0000000000..0d39e97dd3 --- /dev/null +++ b/arch/arm/mach-zynqmp-r5/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-y += cpu.o diff --git a/arch/arm/mach-zynqmp-r5/cpu.c b/arch/arm/mach-zynqmp-r5/cpu.c new file mode 100644 index 0000000000..98f63e3427 --- /dev/null +++ b/arch/arm/mach-zynqmp-r5/cpu.c @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 Xilinx, Inc. (Michal Simek) + */ + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +struct mpu_region_config region_config[] = { + { 0x00000000, REGION_0, XN_DIS, PRIV_RW_USR_RW, + O_I_WB_RD_WR_ALLOC, REGION_1GB }, + { 0x20000000, REGION_1, XN_EN, PRIV_RO_USR_RO, + O_I_WB_RD_WR_ALLOC, REGION_512MB }, + { 0x40000000, REGION_2, XN_EN, PRIV_RO_USR_RO, + O_I_WB_RD_WR_ALLOC, REGION_1GB }, +}; + +int arch_cpu_init(void) +{ + gd->cpu_clk = CONFIG_CPU_FREQ_HZ; + + setup_mpu_regions(region_config, sizeof(region_config) / + sizeof(struct mpu_region_config)); + + return 0; +} + +/* + * Perform the low-level reset. + */ +void reset_cpu(ulong addr) +{ + while (1) + ; +} diff --git a/board/xilinx/zynqmp_r5/MAINTAINERS b/board/xilinx/zynqmp_r5/MAINTAINERS new file mode 100644 index 0000000000..ac26764978 --- /dev/null +++ b/board/xilinx/zynqmp_r5/MAINTAINERS @@ -0,0 +1,7 @@ +XILINX_ZYNQMP_R5 BOARDS +M: Michal Simek +S: Maintained +F: arch/arm/dts/zynqmp-r5* +F: board/xilinx/zynqmp_r5/ +F: include/configs/xilinx_zynqmp_r5_* +F: configs/xilinx_zynqmp_r5_* diff --git a/board/xilinx/zynqmp_r5/Makefile b/board/xilinx/zynqmp_r5/Makefile new file mode 100644 index 0000000000..c5a3e3d328 --- /dev/null +++ b/board/xilinx/zynqmp_r5/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# (C) Copyright 2018 Xilinx, Inc. (Michal Simek) +# + +obj-y := board.o diff --git a/board/xilinx/zynqmp_r5/board.c b/board/xilinx/zynqmp_r5/board.c new file mode 100644 index 0000000000..70fb202354 --- /dev/null +++ b/board/xilinx/zynqmp_r5/board.c @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * (C) Copyright 2018 Xilinx, Inc. (Michal Simek) + */ + +#include +#include + +int board_init(void) +{ + return 0; +} + +int dram_init_banksize(void) +{ + return fdtdec_setup_memory_banksize(); +} + +int dram_init(void) +{ + if (fdtdec_setup_memory_size() != 0) + return -EINVAL; + + return 0; +} diff --git a/configs/xilinx_zynqmp_r5_defconfig b/configs/xilinx_zynqmp_r5_defconfig new file mode 100644 index 0000000000..46715242e7 --- /dev/null +++ b/configs/xilinx_zynqmp_r5_defconfig @@ -0,0 +1,16 @@ +CONFIG_ARM=y +CONFIG_ARCH_ZYNQMP_R5=y +CONFIG_SYS_TEXT_BASE=0x10000000 +CONFIG_DEFAULT_DEVICE_TREE="zynqmp-r5" +CONFIG_DEBUG_UART=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_SYS_PROMPT="ZynqMP r5> " +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set +CONFIG_OF_EMBED=y +CONFIG_DEBUG_UART_ZYNQ=y +CONFIG_DEBUG_UART_BASE=0xff010000 +CONFIG_DEBUG_UART_CLOCK=100000000 +CONFIG_ZYNQ_SERIAL=y +CONFIG_TIMER=y +CONFIG_CADENCE_TTC_TIMER=y diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 4be8868536..5937910e5b 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -624,7 +624,7 @@ config STM32_SERIAL config ZYNQ_SERIAL bool "Cadence (Xilinx Zynq) UART support" - depends on DM_SERIAL && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP) + depends on DM_SERIAL && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_ZYNQMP_R5) help This driver supports the Cadence UART. It is found e.g. in Xilinx Zynq/ZynqMP. diff --git a/include/configs/xilinx_zynqmp_r5.h b/include/configs/xilinx_zynqmp_r5.h new file mode 100644 index 0000000000..05105e5d44 --- /dev/null +++ b/include/configs/xilinx_zynqmp_r5.h @@ -0,0 +1,51 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * (C) Copyright 2018 Xilinx, Inc. (Michal Simek) + */ + +#ifndef __CONFIG_ZYNQMP_R5_H +#define __CONFIG_ZYNQMP_R5_H + +#define CONFIG_EXTRA_ENV_SETTINGS + +/* CPU clock */ +#define CONFIG_CPU_FREQ_HZ 500000000 + +/* Serial drivers */ +/* The following table includes the supported baudrates */ +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} + +# define CONFIG_ENV_SIZE (128 << 10) + +/* Allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +/* Boot configuration */ +#define CONFIG_SYS_LOAD_ADDR 0 /* default? */ + +#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ + +#define CONFIG_NR_DRAM_BANKS 1 + +#define CONFIG_SYS_MALLOC_LEN 0x1400000 + +#define CONFIG_SYS_INIT_RAM_ADDR 0xFFFF0000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) + +/* Extend size of kernel image for uncompression */ +#define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024) + +#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE + +#define CONFIG_SKIP_LOWLEVEL_INIT + +/* 0x0 - 0x40 is used for placing exception vectors */ +#define CONFIG_SYS_MEMTEST_START 0x40 +#define CONFIG_SYS_MEMTEST_END 0x100 +#define CONFIG_SYS_MEMTEST_SCRATCH 0 + +#endif /* __CONFIG_ZYNQ_ZYNQMP_R5_H */