From: Gabor Juhos Date: Wed, 29 Jun 2011 08:57:34 +0000 (+0000) Subject: ar71xx: remove 2.6.38 support X-Git-Tag: reboot~16470 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=1d5378f58840bd259b21e5c2b3f46b32033ded56;p=oweals%2Fopenwrt.git ar71xx: remove 2.6.38 support SVN-Revision: 27312 --- diff --git a/target/linux/ar71xx/config-2.6.38 b/target/linux/ar71xx/config-2.6.38 deleted file mode 100644 index 36badd13bd..0000000000 --- a/target/linux/ar71xx/config-2.6.38 +++ /dev/null @@ -1,204 +0,0 @@ -CONFIG_AG71XX=y -CONFIG_AG71XX_AR8216_SUPPORT=y -# CONFIG_AG71XX_DEBUG is not set -# CONFIG_AG71XX_DEBUG_FS is not set -CONFIG_AR71XX_DEV_AP91_PCI=y -CONFIG_AR71XX_DEV_AP94_PCI=y -CONFIG_AR71XX_DEV_AR9XXX_WMAC=y -CONFIG_AR71XX_DEV_DB120_PCI=y -CONFIG_AR71XX_DEV_DSA=y -CONFIG_AR71XX_DEV_GPIO_BUTTONS=y -CONFIG_AR71XX_DEV_LEDS_GPIO=y -CONFIG_AR71XX_DEV_M25P80=y -CONFIG_AR71XX_DEV_PB42_PCI=y -CONFIG_AR71XX_DEV_PB9X_PCI=y -CONFIG_AR71XX_DEV_USB=y -CONFIG_AR71XX_MACH_AP121=y -CONFIG_AR71XX_MACH_AP81=y -CONFIG_AR71XX_MACH_AP83=y -CONFIG_AR71XX_MACH_AP96=y -CONFIG_AR71XX_MACH_AW_NR580=y -CONFIG_AR71XX_MACH_DB120=y -CONFIG_AR71XX_MACH_DIR_600_A1=y -CONFIG_AR71XX_MACH_DIR_615_C1=y -CONFIG_AR71XX_MACH_DIR_825_B1=y -CONFIG_AR71XX_MACH_EAP7660D=y -CONFIG_AR71XX_MACH_JA76PF=y -CONFIG_AR71XX_MACH_JWAP003=y -CONFIG_AR71XX_MACH_MZK_W04NU=y -CONFIG_AR71XX_MACH_MZK_W300NH=y -CONFIG_AR71XX_MACH_NBG460N=y -CONFIG_AR71XX_MACH_PB42=y -CONFIG_AR71XX_MACH_PB44=y -CONFIG_AR71XX_MACH_PB92=y -CONFIG_AR71XX_MACH_RB4XX=y -CONFIG_AR71XX_MACH_RB750=y -CONFIG_AR71XX_MACH_TEW_632BRP=y -CONFIG_AR71XX_MACH_TL_MR3X20=y -CONFIG_AR71XX_MACH_TL_WA901ND=y -CONFIG_AR71XX_MACH_TL_WA901ND_V2=y -CONFIG_AR71XX_MACH_TL_WR1043ND=y -CONFIG_AR71XX_MACH_TL_WR741ND=y -CONFIG_AR71XX_MACH_TL_WR841N_V1=y -CONFIG_AR71XX_MACH_TL_WR941ND=y -CONFIG_AR71XX_MACH_UBNT=y -CONFIG_AR71XX_MACH_WNDR3700=y -CONFIG_AR71XX_MACH_WNR2000=y -CONFIG_AR71XX_MACH_WP543=y -CONFIG_AR71XX_MACH_WRT160NL=y -CONFIG_AR71XX_MACH_WRT400N=y -CONFIG_AR71XX_MACH_WZR_HP_G300NH=y -CONFIG_AR71XX_MACH_ZCN_1523H=y -CONFIG_AR71XX_NVRAM=y -CONFIG_AR71XX_PCI_ATH9K_FIXUP=y -CONFIG_AR71XX_WDT=y -CONFIG_AR8216_PHY=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_ARCH_REQUIRE_GPIOLIB=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ATHEROS_AR71XX=y -# CONFIG_AUTO_IRQ_AFFINITY is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_CEVT_R4K=y -CONFIG_CEVT_R4K_LIB=y -CONFIG_CMDLINE="rootfstype=squashfs,yaffs,jffs2 noinitrd" -CONFIG_CMDLINE_BOOL=y -# CONFIG_CMDLINE_OVERRIDE is not set -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_MIPS32=y -# CONFIG_CPU_MIPS32_R1 is not set -CONFIG_CPU_MIPS32_R2=y -CONFIG_CPU_MIPSR2=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_CSRC_R4K=y -CONFIG_CSRC_R4K_LIB=y -CONFIG_DECOMPRESS_LZMA=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_EARLY_PRINTK=y -# CONFIG_FSNOTIFY is not set -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_GPIO=y -# CONFIG_GENERIC_HARDIRQS_NO_DEPRECATED is not set -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -# CONFIG_GENERIC_PENDING_IRQ is not set -CONFIG_GPIOLIB=y -CONFIG_GPIO_NXP_74HC153=y -CONFIG_GPIO_PCF857X=y -CONFIG_GPIO_SYSFS=y -# CONFIG_HARDIRQS_SW_RESEND is not set -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_ATTRS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_GENERIC_HARDIRQS=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_PERF_EVENTS=y -# CONFIG_HAVE_SPARSE_IRQ is not set -CONFIG_HW_HAS_PCI=y -CONFIG_IP17XX_PHY=y -CONFIG_I2C=y -CONFIG_I2C_ALGOBIT=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_GPIO=y -CONFIG_IMAGE_CMDLINE_HACK=y -CONFIG_INITRAMFS_ROOT_GID=0 -CONFIG_INITRAMFS_ROOT_UID=0 -CONFIG_INITRAMFS_SOURCE="../../root" -CONFIG_IRQ_CPU=y -# CONFIG_IRQ_PER_CPU is not set -# CONFIG_LEDS_GPIO is not set -# CONFIG_LEDS_RB750 is not set -# CONFIG_LEDS_WNDR3700_USB is not set -CONFIG_LOONGSON_UART_BASE=y -# CONFIG_M25PXX_USE_FAST_READ is not set -CONFIG_MACH_NO_WESTBRIDGE=y -CONFIG_MARVELL_PHY=y -CONFIG_MICREL_PHY=y -CONFIG_MIPS=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 -CONFIG_MIPS_MACHINE=y -CONFIG_MIPS_MT_DISABLED=y -CONFIG_MTD_AR91XX_FLASH=y -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_M25P80=y -CONFIG_MTD_MYLOADER_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2 -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_WRT160NL_PARTS=y -CONFIG_MYLOADER=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_PER_CPU_KM=y -CONFIG_NET_DSA=y -CONFIG_NET_DSA_MV88E6060=y -CONFIG_NET_DSA_MV88E6063=y -CONFIG_NET_DSA_TAG_TRAILER=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PCI=y -CONFIG_PCI_DISABLE_COMMON_QUIRKS=y -CONFIG_PCI_DOMAINS=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PHYLIB=y -# CONFIG_PREEMPT_RCU is not set -# CONFIG_QUOTACTL is not set -CONFIG_RTL8306_PHY=y -CONFIG_RTL8366RB_PHY=y -CONFIG_RTL8366S_PHY=y -CONFIG_RTL8366_SMI=y -# CONFIG_SCSI_DMA is not set -CONFIG_SERIAL_8250_NR_UARTS=1 -CONFIG_SERIAL_8250_RUNTIME_UARTS=1 -# CONFIG_SLAB is not set -CONFIG_SLUB=y -CONFIG_SOC_AR71XX=y -CONFIG_SOC_AR724X=y -CONFIG_SOC_AR913X=y -CONFIG_SOC_AR933X=y -CONFIG_SOC_AR934X=y -CONFIG_SPI=y -CONFIG_SPI_AP83=y -CONFIG_SPI_AR71XX=y -CONFIG_SPI_BITBANG=y -CONFIG_SPI_GPIO=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_PB44=y -CONFIG_SWCONFIG=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_CPU_MIPS32_R2=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_USB_SUPPORT=y -CONFIG_ZONE_DMA_FLAG=0 -# CONFIG_YAFFS_DISABLE_TAGS_ECC is not set -# CONFIG_YAFFS_EMPTY_LOST_AND_FOUND is not set -# CONFIG_YAFFS_DISABLE_BLOCK_REFRESHING is not set -# CONFIG_YAFFS_DISABLE_BACKGROUND is not set -# CONFIG_YAFFS_XATTR is not set diff --git a/target/linux/ar71xx/patches-2.6.38/001-ar71xx_core.patch b/target/linux/ar71xx/patches-2.6.38/001-ar71xx_core.patch deleted file mode 100644 index 2d15f0c639..0000000000 --- a/target/linux/ar71xx/patches-2.6.38/001-ar71xx_core.patch +++ /dev/null @@ -1,50 +0,0 @@ ---- a/arch/mips/Makefile -+++ b/arch/mips/Makefile -@@ -158,6 +158,13 @@ cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -W - endif - cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1 - -+# -+# Atheros AR71xx -+# -+core-$(CONFIG_ATHEROS_AR71XX) += arch/mips/ar71xx/ -+cflags-$(CONFIG_ATHEROS_AR71XX) += -I$(srctree)/arch/mips/include/asm/mach-ar71xx -+load-$(CONFIG_ATHEROS_AR71XX) += 0xffffffff80060000 -+ - cflags-$(CONFIG_CPU_R4000_WORKAROUNDS) += $(call cc-option,-mfix-r4000,) - cflags-$(CONFIG_CPU_R4400_WORKAROUNDS) += $(call cc-option,-mfix-r4400,) - cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS) += $(call cc-option,-mno-daddi,) ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -83,6 +83,23 @@ config ATH79 - help - Support for the Atheros AR71XX/AR724X/AR913X SoCs. - -+config ATHEROS_AR71XX -+ bool "Atheros AR71xx based boards" -+ select CEVT_R4K -+ select CSRC_R4K -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select IRQ_CPU -+ select ARCH_REQUIRE_GPIOLIB -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_HAS_CPU_MIPS32_R2 -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_HAS_EARLY_PRINTK -+ select MIPS_MACHINE -+ help -+ Support for Atheros AR71xx based boards. -+ - config BCM47XX - bool "Broadcom BCM47XX based boards" - select CEVT_R4K -@@ -738,6 +755,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD - endchoice - - source "arch/mips/alchemy/Kconfig" -+source "arch/mips/ar71xx/Kconfig" - source "arch/mips/ath79/Kconfig" - source "arch/mips/bcm63xx/Kconfig" - source "arch/mips/jazz/Kconfig" diff --git a/target/linux/ar71xx/patches-2.6.38/002-ar71xx_pci.patch b/target/linux/ar71xx/patches-2.6.38/002-ar71xx_pci.patch deleted file mode 100644 index 3facce9d70..0000000000 --- a/target/linux/ar71xx/patches-2.6.38/002-ar71xx_pci.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/mips/pci/Makefile -+++ b/arch/mips/pci/Makefile -@@ -18,6 +18,7 @@ obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o - obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o - obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \ - ops-bcm63xx.o -+obj-$(CONFIG_ATHEROS_AR71XX) += pci-ar71xx.o pci-ar724x.o - - # - # These are still pretty much in the old state, watch, go blind. diff --git a/target/linux/ar71xx/patches-2.6.38/003-ar71xx_usb_host.patch b/target/linux/ar71xx/patches-2.6.38/003-ar71xx_usb_host.patch deleted file mode 100644 index 672c63a454..0000000000 --- a/target/linux/ar71xx/patches-2.6.38/003-ar71xx_usb_host.patch +++ /dev/null @@ -1,58 +0,0 @@ ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -118,6 +118,13 @@ config XPS_USB_HCD_XILINX - config USB_FSL_MPH_DR_OF - tristate - -+config USB_EHCI_AR71XX -+ bool "USB EHCI support for AR71xx" -+ depends on USB_EHCI_HCD && ATHEROS_AR71XX -+ default y -+ help -+ Support for Atheros AR71xx built-in EHCI controller -+ - config USB_EHCI_FSL - bool "Support for Freescale on-chip EHCI USB controller" - depends on USB_EHCI_HCD && FSL_SOC -@@ -261,6 +268,13 @@ config USB_OHCI_HCD_OMAP3 - Enables support for the on-chip OHCI controller on - OMAP3 and later chips. - -+config USB_OHCI_AR71XX -+ bool "USB OHCI support for Atheros AR71xx" -+ depends on USB_OHCI_HCD && ATHEROS_AR71XX -+ default y -+ help -+ Support for Atheros AR71xx built-in OHCI controller -+ - config USB_OHCI_HCD_PPC_SOC - bool "OHCI support for on-chip PPC USB controller" - depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx) ---- a/drivers/usb/host/ehci-hcd.c -+++ b/drivers/usb/host/ehci-hcd.c -@@ -1254,6 +1254,11 @@ MODULE_LICENSE ("GPL"); - #define PLATFORM_DRIVER ehci_msm_driver - #endif - -+#ifdef CONFIG_USB_EHCI_AR71XX -+#include "ehci-ar71xx.c" -+#define PLATFORM_DRIVER ehci_ar71xx_driver -+#endif -+ - #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ - !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \ - !defined(XILINX_OF_PLATFORM_DRIVER) ---- a/drivers/usb/host/ohci-hcd.c -+++ b/drivers/usb/host/ohci-hcd.c -@@ -1122,6 +1122,11 @@ MODULE_LICENSE ("GPL"); - #define PLATFORM_DRIVER ohci_hcd_cns3xxx_driver - #endif - -+#ifdef CONFIG_USB_OHCI_AR71XX -+#include "ohci-ar71xx.c" -+#define PLATFORM_DRIVER ohci_hcd_ar71xx_driver -+#endif -+ - #if !defined(PCI_DRIVER) && \ - !defined(PLATFORM_DRIVER) && \ - !defined(OMAP1_PLATFORM_DRIVER) && \ diff --git a/target/linux/ar71xx/patches-2.6.38/004-ar71xx_spi_controller.patch b/target/linux/ar71xx/patches-2.6.38/004-ar71xx_spi_controller.patch deleted file mode 100644 index 5bb8b32599..0000000000 --- a/target/linux/ar71xx/patches-2.6.38/004-ar71xx_spi_controller.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -61,6 +61,13 @@ config SPI_ATH79 - This enables support for the SPI controller present on the - Atheros AR71XX/AR724X/AR913X SoCs. - -+config SPI_AR71XX -+ tristate "Atheros AR71xx SPI Controller" -+ depends on SPI_MASTER && ATHEROS_AR71XX -+ select SPI_BITBANG -+ help -+ This is the SPI contoller driver for Atheros AR71xx. -+ - config SPI_ATMEL - tristate "Atmel SPI Controller" - depends on (ARCH_AT91 || AVR32) ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -9,6 +9,7 @@ ccflags-$(CONFIG_SPI_DEBUG) := -DDEBUG - obj-$(CONFIG_SPI_MASTER) += spi.o - - # SPI master controller drivers (bus) -+obj-$(CONFIG_SPI_AR71XX) += ar71xx_spi.o - obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o - obj-$(CONFIG_SPI_ATH79) += ath79_spi.o - obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o diff --git a/target/linux/ar71xx/patches-2.6.38/005-ar71xx_mac_driver.patch b/target/linux/ar71xx/patches-2.6.38/005-ar71xx_mac_driver.patch deleted file mode 100644 index 4f6cdb6096..0000000000 --- a/target/linux/ar71xx/patches-2.6.38/005-ar71xx_mac_driver.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/drivers/net/Kconfig -+++ b/drivers/net/Kconfig -@@ -2061,6 +2061,8 @@ config ACENIC_OMIT_TIGON_I - - The safe and default value for this is N. - -+source drivers/net/ag71xx/Kconfig -+ - config DL2K - tristate "DL2000/TC902x-based Gigabit Ethernet support" - depends on PCI ---- a/drivers/net/Makefile -+++ b/drivers/net/Makefile -@@ -112,6 +112,7 @@ obj-$(CONFIG_STMMAC_ETH) += stmmac/ - # end link order section - # - -+obj-$(CONFIG_AG71XX) += ag71xx/ - obj-$(CONFIG_SUNDANCE) += sundance.o - obj-$(CONFIG_HAMACHI) += hamachi.o - obj-$(CONFIG_NET) += Space.o loopback.o diff --git a/target/linux/ar71xx/patches-2.6.38/006-ar71xx_wdt_driver.patch b/target/linux/ar71xx/patches-2.6.38/006-ar71xx_wdt_driver.patch deleted file mode 100644 index dbe4ae686a..0000000000 --- a/target/linux/ar71xx/patches-2.6.38/006-ar71xx_wdt_driver.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/watchdog/Kconfig -+++ b/drivers/watchdog/Kconfig -@@ -972,6 +972,13 @@ config BCM63XX_WDT - To compile this driver as a loadable module, choose M here. - The module will be called bcm63xx_wdt. - -+config AR71XX_WDT -+ tristate "Atheros AR71xx Watchdog Timer" -+ depends on ATHEROS_AR71XX -+ help -+ Hardware driver for the built-in watchdog timer on the Atheros -+ AR71xx SoCs. -+ - # PARISC Architecture - - # POWERPC Architecture ---- a/drivers/watchdog/Makefile -+++ b/drivers/watchdog/Makefile -@@ -117,6 +117,7 @@ obj-$(CONFIG_INDYDOG) += indydog.o - obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o - obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o - obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o -+obj-$(CONFIG_AR71XX_WDT) += ar71xx_wdt.o - obj-$(CONFIG_AR7_WDT) += ar7_wdt.o - obj-$(CONFIG_TXX9_WDT) += txx9wdt.o - obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o diff --git a/target/linux/ar71xx/patches-2.6.38/007-ar91xx_flash_driver.patch b/target/linux/ar71xx/patches-2.6.38/007-ar91xx_flash_driver.patch deleted file mode 100644 index 1bb504c1c0..0000000000 --- a/target/linux/ar71xx/patches-2.6.38/007-ar91xx_flash_driver.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/mtd/maps/Kconfig -+++ b/drivers/mtd/maps/Kconfig -@@ -260,6 +260,13 @@ config MTD_BCM963XX - Support for parsing CFE image tag and creating MTD partitions on - Broadcom BCM63xx boards. - -+config MTD_AR91XX_FLASH -+ tristate "Atheros AR91xx parallel flash support" -+ depends on ATHEROS_AR71XX -+ select MTD_COMPLEX_MAPPINGS -+ help -+ Parallel flash driver for the Atheros AR91xx based boards. -+ - config MTD_DILNETPC - tristate "CFI Flash device mapped on DIL/Net PC" - depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN ---- a/drivers/mtd/maps/Makefile -+++ b/drivers/mtd/maps/Makefile -@@ -40,6 +40,7 @@ obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx2 - obj-$(CONFIG_MTD_DBOX2) += dbox2-flash.o - obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o - obj-$(CONFIG_MTD_PCI) += pci.o -+obj-$(CONFIG_MTD_AR91XX_FLASH) += ar91xx_flash.o - obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o - obj-$(CONFIG_MTD_EDB7312) += edb7312.o - obj-$(CONFIG_MTD_IMPA7) += impa7.o diff --git a/target/linux/ar71xx/patches-2.6.38/101-ksz8041_phy_driver.patch b/target/linux/ar71xx/patches-2.6.38/101-ksz8041_phy_driver.patch deleted file mode 100644 index 5f7840f971..0000000000 --- a/target/linux/ar71xx/patches-2.6.38/101-ksz8041_phy_driver.patch +++ /dev/null @@ -1,24 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -118,6 +118,11 @@ config RTL8306_PHY - tristate "Driver for Realtek RTL8306S switches" - select SWCONFIG - -+config MICREL_PHY -+ tristate "Drivers for Micrel/Kendin PHYs" -+ ---help--- -+ Currently has a driver for the KSZ8041 -+ - config FIXED_PHY - bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" - depends on PHYLIB=y ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -24,6 +24,7 @@ obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi - obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o - obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb.o - obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o -+obj-$(CONFIG_MICREL_PHY) += micrel.o - obj-$(CONFIG_FIXED_PHY) += fixed.o - obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o - obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o diff --git a/target/linux/ar71xx/patches-2.6.38/102-mtd_m25p80_add_myloader_parser.patch b/target/linux/ar71xx/patches-2.6.38/102-mtd_m25p80_add_myloader_parser.patch deleted file mode 100644 index 003b922c67..0000000000 --- a/target/linux/ar71xx/patches-2.6.38/102-mtd_m25p80_add_myloader_parser.patch +++ /dev/null @@ -1,19 +0,0 @@ ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -965,6 +965,16 @@ static int __devinit m25p_probe(struct s - part_probes, &parts, 0); - } - -+#ifdef CONFIG_MTD_MYLOADER_PARTS -+ if (nr_parts <= 0) { -+ static const char *part_probes[] -+ = { "MyLoader", NULL, }; -+ -+ nr_parts = parse_mtd_partitions(&flash->mtd, -+ part_probes, &parts, 0); -+ } -+#endif -+ - if (nr_parts <= 0 && data && data->parts) { - parts = data->parts; - nr_parts = data->nr_parts; diff --git a/target/linux/ar71xx/patches-2.6.38/104-mtd_m25p80_add_redboot_parser.patch b/target/linux/ar71xx/patches-2.6.38/104-mtd_m25p80_add_redboot_parser.patch deleted file mode 100644 index 989ab7e59b..0000000000 --- a/target/linux/ar71xx/patches-2.6.38/104-mtd_m25p80_add_redboot_parser.patch +++ /dev/null @@ -1,18 +0,0 @@ ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -975,6 +975,15 @@ static int __devinit m25p_probe(struct s - } - #endif - -+#ifdef CONFIG_MTD_REDBOOT_PARTS -+ if (nr_parts <= 0) { -+ static const char *part_probes[] -+ = { "RedBoot", NULL, }; -+ -+ nr_parts = parse_mtd_partitions(&flash->mtd, -+ part_probes, &parts, 0); -+ } -+#endif - if (nr_parts <= 0 && data && data->parts) { - parts = data->parts; - nr_parts = data->nr_parts; diff --git a/target/linux/ar71xx/patches-2.6.38/107-mtd-SST39VF6401B-support.patch b/target/linux/ar71xx/patches-2.6.38/107-mtd-SST39VF6401B-support.patch deleted file mode 100644 index 246abd5dc0..0000000000 --- a/target/linux/ar71xx/patches-2.6.38/107-mtd-SST39VF6401B-support.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/drivers/mtd/chips/jedec_probe.c -+++ b/drivers/mtd/chips/jedec_probe.c -@@ -148,6 +148,7 @@ - #define SST39LF160 0x2782 - #define SST39VF1601 0x234b - #define SST39VF3201 0x235b -+#define SST39VF6401B 0x236d - #define SST39WF1601 0x274b - #define SST39WF1602 0x274a - #define SST39LF512 0x00D4 -@@ -1568,6 +1569,18 @@ static const struct amd_flash_info jedec - ERASEINFO(0x10000,64), - } - }, { -+ .mfr_id = CFI_MFR_SST, -+ .dev_id = SST39VF6401B, -+ .name = "SST 39VF6401B", -+ .devtypes = CFI_DEVICETYPE_X16, -+ .uaddr = MTD_UADDR_0xAAAA_0x5555, -+ .dev_size = SIZE_8MiB, -+ .cmd_set = P_ID_AMD_STD, -+ .nr_regions = 1, -+ .regions = { -+ ERASEINFO(0x10000,128) -+ } -+ }, { - .mfr_id = CFI_MFR_ST, - .dev_id = M29F800AB, - .name = "ST M29F800AB", diff --git a/target/linux/ar71xx/patches-2.6.38/108-mtd_fix_cfi_cmdset_0002_status_check.patch b/target/linux/ar71xx/patches-2.6.38/108-mtd_fix_cfi_cmdset_0002_status_check.patch deleted file mode 100644 index dcaf8c1031..0000000000 --- a/target/linux/ar71xx/patches-2.6.38/108-mtd_fix_cfi_cmdset_0002_status_check.patch +++ /dev/null @@ -1,69 +0,0 @@ ---- a/drivers/mtd/chips/cfi_cmdset_0002.c -+++ b/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -1218,8 +1218,8 @@ static int __xipram do_write_oneword(str - break; - } - -- if (chip_ready(map, adr)) -- break; -+ if (chip_good(map, adr, datum)) -+ goto enable_xip; - - /* Latency issues. Drop the lock, wait a while and retry */ - UDELAY(map, chip, adr, 1); -@@ -1235,6 +1235,8 @@ static int __xipram do_write_oneword(str - - ret = -EIO; - } -+ -+ enable_xip: - xip_enable(map, chip, adr); - op_done: - chip->state = FL_READY; -@@ -1566,7 +1568,6 @@ static int cfi_amdstd_write_buffers(stru - return 0; - } - -- - /* - * Handle devices with one erase region, that only implement - * the chip erase command. -@@ -1630,8 +1631,8 @@ static int __xipram do_erase_chip(struct - chip->erase_suspended = 0; - } - -- if (chip_ready(map, adr)) -- break; -+ if (chip_good(map, adr, map_word_ff(map))) -+ goto op_done; - - if (time_after(jiffies, timeo)) { - printk(KERN_WARNING "MTD %s(): software timeout\n", -@@ -1651,6 +1652,7 @@ static int __xipram do_erase_chip(struct - ret = -EIO; - } - -+ op_done: - chip->state = FL_READY; - xip_enable(map, chip, adr); - put_chip(map, chip, adr); -@@ -1718,9 +1720,9 @@ static int __xipram do_erase_oneblock(st - chip->erase_suspended = 0; - } - -- if (chip_ready(map, adr)) { -+ if (chip_good(map, adr, map_word_ff(map))) { - xip_enable(map, chip, adr); -- break; -+ goto op_done; - } - - if (time_after(jiffies, timeo)) { -@@ -1742,6 +1744,7 @@ static int __xipram do_erase_oneblock(st - ret = -EIO; - } - -+ op_done: - chip->state = FL_READY; - put_chip(map, chip, adr); - mutex_unlock(&chip->mutex); diff --git a/target/linux/ar71xx/patches-2.6.38/109-mtd-wrt160nl-trx-parser.patch b/target/linux/ar71xx/patches-2.6.38/109-mtd-wrt160nl-trx-parser.patch deleted file mode 100644 index 294d873997..0000000000 --- a/target/linux/ar71xx/patches-2.6.38/109-mtd-wrt160nl-trx-parser.patch +++ /dev/null @@ -1,44 +0,0 @@ ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -984,6 +984,16 @@ static int __devinit m25p_probe(struct s - part_probes, &parts, 0); - } - #endif -+ -+#ifdef CONFIG_MTD_WRT160NL_PARTS -+ if (nr_parts <= 0) { -+ static const char *part_probes[] -+ = { "wrt160nl", NULL, }; -+ -+ nr_parts = parse_mtd_partitions(&flash->mtd, -+ part_probes, &parts, 0); -+ } -+#endif - if (nr_parts <= 0 && data && data->parts) { - parts = data->parts; - nr_parts = data->nr_parts; ---- a/drivers/mtd/Kconfig -+++ b/drivers/mtd/Kconfig -@@ -184,6 +184,12 @@ config MTD_AR7_PARTS - - endif # MTD_PARTITIONS - -+config MTD_WRT160NL_PARTS -+ tristate "Linksys WRT160NL partitioning support" -+ depends on MTD_PARTITIONS && AR71XX_MACH_WRT160NL -+ ---help--- -+ Linksys WRT160NL partitioning support -+ - config MTD_MYLOADER_PARTS - tristate "MyLoader partition parsing" - depends on MTD_PARTITIONS && (ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX) ---- a/drivers/mtd/Makefile -+++ b/drivers/mtd/Makefile -@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redbo - obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o - obj-$(CONFIG_MTD_AFS_PARTS) += afs.o - obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o -+obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o - obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o - - # 'Users' - code which presents functionality to userspace. diff --git a/target/linux/ar71xx/patches-2.6.38/110-usb-ehci-add-war-for-synopsys-hc-bug.patch b/target/linux/ar71xx/patches-2.6.38/110-usb-ehci-add-war-for-synopsys-hc-bug.patch deleted file mode 100644 index aeec79ce4e..0000000000 --- a/target/linux/ar71xx/patches-2.6.38/110-usb-ehci-add-war-for-synopsys-hc-bug.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/drivers/usb/host/ehci-q.c -+++ b/drivers/usb/host/ehci-q.c -@@ -1181,6 +1181,9 @@ static void end_unlink_async (struct ehc - ehci->reclaim = NULL; - start_unlink_async (ehci, next); - } -+ -+ if (ehci->has_synopsys_hc_bug) -+ writel((u32)ehci->async->qh_dma, &ehci->regs->async_next); - } - - /* makes sure the async qh will become idle */ ---- a/drivers/usb/host/ehci.h -+++ b/drivers/usb/host/ehci.h -@@ -134,6 +134,7 @@ struct ehci_hcd { /* one per controlle - unsigned amd_l1_fix:1; - unsigned fs_i_thresh:1; /* Intel iso scheduling */ - unsigned use_dummy_qh:1; /* AMD Frame List table quirk*/ -+ unsigned has_synopsys_hc_bug:1; /* Synopsys HC */ - - /* required for usb32 quirk */ - #define OHCI_CTRL_HCFS (3 << 6) diff --git a/target/linux/ar71xx/patches-2.6.38/111-mtd-cfi_cmdset_0002-force-word-write.patch b/target/linux/ar71xx/patches-2.6.38/111-mtd-cfi_cmdset_0002-force-word-write.patch deleted file mode 100644 index 80846055b5..0000000000 --- a/target/linux/ar71xx/patches-2.6.38/111-mtd-cfi_cmdset_0002-force-word-write.patch +++ /dev/null @@ -1,61 +0,0 @@ ---- a/drivers/mtd/chips/cfi_cmdset_0002.c -+++ b/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -39,7 +39,7 @@ - #include - - #define AMD_BOOTLOC_BUG --#define FORCE_WORD_WRITE 0 -+#define FORCE_WORD_WRITE 1 - - #define MAX_WORD_RETRIES 3 - -@@ -50,7 +50,9 @@ - - static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); - static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); -+#if !FORCE_WORD_WRITE - static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); -+#endif - static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *); - static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *); - static void cfi_amdstd_sync (struct mtd_info *); -@@ -186,6 +188,7 @@ static void fixup_amd_bootblock(struct m - } - #endif - -+#if !FORCE_WORD_WRITE - static void fixup_use_write_buffers(struct mtd_info *mtd) - { - struct map_info *map = mtd->priv; -@@ -195,6 +198,7 @@ static void fixup_use_write_buffers(stru - mtd->write = cfi_amdstd_write_buffers; - } - } -+#endif /* !FORCE_WORD_WRITE */ - - /* Atmel chips don't use the same PRI format as AMD chips */ - static void fixup_convert_atmel_pri(struct mtd_info *mtd) -@@ -1378,6 +1382,7 @@ static int cfi_amdstd_write_words(struct - /* - * FIXME: interleaved mode not tested, and probably not supported! - */ -+#if !FORCE_WORD_WRITE - static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, - unsigned long adr, const u_char *buf, - int len) -@@ -1488,7 +1493,6 @@ static int __xipram do_write_buffer(stru - return ret; - } - -- - static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf) - { -@@ -1567,6 +1571,7 @@ static int cfi_amdstd_write_buffers(stru - - return 0; - } -+#endif /* !FORCE_WORD_WRITE */ - - /* - * Handle devices with one erase region, that only implement diff --git a/target/linux/ar71xx/patches-2.6.38/120-dsa-trailer-tag-validation-fix.patch b/target/linux/ar71xx/patches-2.6.38/120-dsa-trailer-tag-validation-fix.patch deleted file mode 100644 index 3e3902bac0..0000000000 --- a/target/linux/ar71xx/patches-2.6.38/120-dsa-trailer-tag-validation-fix.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/net/dsa/tag_trailer.c -+++ b/net/dsa/tag_trailer.c -@@ -87,7 +87,7 @@ static int trailer_rcv(struct sk_buff *s - - trailer = skb_tail_pointer(skb) - 4; - if (trailer[0] != 0x80 || (trailer[1] & 0xf8) != 0x00 || -- (trailer[3] & 0xef) != 0x00 || trailer[3] != 0x00) -+ (trailer[2] & 0xef) != 0x00 || (trailer[3] & 0xfe) != 0x00) - goto out_drop; - - source_port = trailer[1] & 7; diff --git a/target/linux/ar71xx/patches-2.6.38/121-dsa-add-88e6063-driver.patch b/target/linux/ar71xx/patches-2.6.38/121-dsa-add-88e6063-driver.patch deleted file mode 100644 index 1a11a69c6f..0000000000 --- a/target/linux/ar71xx/patches-2.6.38/121-dsa-add-88e6063-driver.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/net/dsa/Kconfig -+++ b/net/dsa/Kconfig -@@ -36,6 +36,13 @@ config NET_DSA_MV88E6060 - This enables support for the Marvell 88E6060 ethernet switch - chip. - -+config NET_DSA_MV88E6063 -+ bool "Marvell 88E6063 ethernet switch chip support" -+ select NET_DSA_TAG_TRAILER -+ ---help--- -+ This enables support for the Marvell 88E6063 ethernet switch -+ chip -+ - config NET_DSA_MV88E6XXX_NEED_PPU - bool - default n ---- a/net/dsa/Makefile -+++ b/net/dsa/Makefile -@@ -6,6 +6,7 @@ obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag - # switch drivers - obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx.o - obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o -+obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o - obj-$(CONFIG_NET_DSA_MV88E6123_61_65) += mv88e6123_61_65.o - obj-$(CONFIG_NET_DSA_MV88E6131) += mv88e6131.o - diff --git a/target/linux/ar71xx/patches-2.6.38/140-redboot_partition_scan.patch b/target/linux/ar71xx/patches-2.6.38/140-redboot_partition_scan.patch deleted file mode 100644 index a09271a069..0000000000 --- a/target/linux/ar71xx/patches-2.6.38/140-redboot_partition_scan.patch +++ /dev/null @@ -1,54 +0,0 @@ ---- a/drivers/mtd/redboot.c -+++ b/drivers/mtd/redboot.c -@@ -78,31 +78,32 @@ static int parse_redboot_partitions(stru - static char nullstring[] = "unallocated"; - #endif - -+ buf = vmalloc(master->erasesize); -+ if (!buf) -+ return -ENOMEM; -+ -+ restart: - if ( directory < 0 ) { - offset = master->size + directory * master->erasesize; -- while (master->block_isbad && -+ while (master->block_isbad && - master->block_isbad(master, offset)) { - if (!offset) { - nogood: - printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n"); -+ vfree(buf); - return -EIO; - } - offset -= master->erasesize; - } - } else { - offset = directory * master->erasesize; -- while (master->block_isbad && -+ while (master->block_isbad && - master->block_isbad(master, offset)) { - offset += master->erasesize; - if (offset == master->size) - goto nogood; - } - } -- buf = vmalloc(master->erasesize); -- -- if (!buf) -- return -ENOMEM; -- - printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n", - master->name, offset); - -@@ -174,6 +175,11 @@ static int parse_redboot_partitions(stru - } - if (i == numslots) { - /* Didn't find it */ -+ if (offset + master->erasesize < master->size) { -+ /* not at the end of the flash yet, maybe next block :) */ -+ directory++; -+ goto restart; -+ } - printk(KERN_NOTICE "No RedBoot partition table detected in %s\n", - master->name); - ret = 0; diff --git a/target/linux/ar71xx/patches-2.6.38/150-drivers-link-spi-before-mtd.patch b/target/linux/ar71xx/patches-2.6.38/150-drivers-link-spi-before-mtd.patch deleted file mode 100644 index f72f8ad07f..0000000000 --- a/target/linux/ar71xx/patches-2.6.38/150-drivers-link-spi-before-mtd.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- a/drivers/Makefile -+++ b/drivers/Makefile -@@ -46,8 +46,8 @@ obj-$(CONFIG_IDE) += ide/ - obj-$(CONFIG_SCSI) += scsi/ - obj-$(CONFIG_ATA) += ata/ - obj-$(CONFIG_TARGET_CORE) += target/ --obj-$(CONFIG_MTD) += mtd/ - obj-$(CONFIG_SPI) += spi/ -+obj-$(CONFIG_MTD) += mtd/ - obj-y += net/ - obj-$(CONFIG_ATM) += atm/ - obj-$(CONFIG_FUSION) += message/ diff --git a/target/linux/ar71xx/patches-2.6.38/151-spi-add-various-flags.patch b/target/linux/ar71xx/patches-2.6.38/151-spi-add-various-flags.patch deleted file mode 100644 index b51f68f3ca..0000000000 --- a/target/linux/ar71xx/patches-2.6.38/151-spi-add-various-flags.patch +++ /dev/null @@ -1,19 +0,0 @@ ---- a/include/linux/spi/spi.h -+++ b/include/linux/spi/spi.h -@@ -441,6 +441,8 @@ struct spi_transfer { - dma_addr_t rx_dma; - - unsigned cs_change:1; -+ unsigned verify:1; -+ unsigned fast_write:1; - u8 bits_per_word; - u16 delay_usecs; - u32 speed_hz; -@@ -482,6 +484,7 @@ struct spi_message { - struct spi_device *spi; - - unsigned is_dma_mapped:1; -+ unsigned fast_read:1; - - /* REVISIT: we might want a flag affecting the behavior of the - * last transfer ... allowing things like "read 16 bit length L" diff --git a/target/linux/ar71xx/patches-2.6.38/152-rb4xx-spi-driver.patch b/target/linux/ar71xx/patches-2.6.38/152-rb4xx-spi-driver.patch deleted file mode 100644 index 9fcf5cc822..0000000000 --- a/target/linux/ar71xx/patches-2.6.38/152-rb4xx-spi-driver.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -304,6 +304,12 @@ config SPI_PXA2XX - config SPI_PXA2XX_PCI - def_bool SPI_PXA2XX && X86_32 && PCI - -+config SPI_RB4XX -+ tristate "Mikrotik RB4XX SPI master" -+ depends on SPI_MASTER && AR71XX_MACH_RB4XX -+ help -+ SPI controller driver for the Mikrotik RB4xx series boards. -+ - config SPI_S3C24XX - tristate "Samsung S3C24XX series SPI" - depends on ARCH_S3C2410 && EXPERIMENTAL ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -52,6 +52,7 @@ obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci. - obj-$(CONFIG_SPI_SH_MSIOF) += spi_sh_msiof.o - obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.o - obj-$(CONFIG_SPI_NUC900) += spi_nuc900.o -+obj-$(CONFIG_SPI_RB4XX) += rb4xx_spi.o - - # special build for s3c24xx spi driver with fiq support - spi_s3c24xx_hw-y := spi_s3c24xx.o diff --git a/target/linux/ar71xx/patches-2.6.38/153-spi-rb4xx-cpld-driver.patch b/target/linux/ar71xx/patches-2.6.38/153-spi-rb4xx-cpld-driver.patch deleted file mode 100644 index 109e815cb0..0000000000 --- a/target/linux/ar71xx/patches-2.6.38/153-spi-rb4xx-cpld-driver.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -450,6 +450,13 @@ config SPI_TLE62X0 - sysfs interface, with each line presented as a kind of GPIO - exposing both switch control and diagnostic feedback. - -+config SPI_RB4XX_CPLD -+ tristate "MikroTik RB4XX CPLD driver" -+ depends on AR71XX_MACH_RB4XX -+ help -+ SPI driver for the Xilinx CPLD chip present on the -+ MikroTik RB4xx boards. -+ - # - # Add new SPI protocol masters in alphabetical order above this line - # ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -61,6 +61,7 @@ spi_s3c24xx_hw-$(CONFIG_SPI_S3C24XX_FIQ) - # ... add above this line ... - - # SPI protocol drivers (device/link on bus) -+obj-$(CONFIG_SPI_RB4XX_CPLD) += spi_rb4xx_cpld.o - obj-$(CONFIG_SPI_SPIDEV) += spidev.o - obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o - # ... add above this line ... diff --git a/target/linux/ar71xx/patches-2.6.38/200-rb4xx_nand_driver.patch b/target/linux/ar71xx/patches-2.6.38/200-rb4xx_nand_driver.patch deleted file mode 100644 index 8c15ebfbcc..0000000000 --- a/target/linux/ar71xx/patches-2.6.38/200-rb4xx_nand_driver.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/drivers/mtd/nand/Kconfig -+++ b/drivers/mtd/nand/Kconfig -@@ -533,4 +533,8 @@ config MTD_NAND_FSMC - Enables support for NAND Flash chips on the ST Microelectronics - Flexible Static Memory Controller (FSMC) - -+config MTD_NAND_RB4XX -+ tristate "NAND flash driver for RouterBoard 4xx series" -+ depends on MTD_NAND && AR71XX_MACH_RB4XX -+ - endif # MTD_NAND ---- a/drivers/mtd/nand/Makefile -+++ b/drivers/mtd/nand/Makefile -@@ -33,6 +33,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx27 - obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o - obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o - obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o -+obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o - obj-$(CONFIG_MTD_ALAUDA) += alauda.o - obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o - obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o diff --git a/target/linux/ar71xx/patches-2.6.38/201-ap83_spi_controller.patch b/target/linux/ar71xx/patches-2.6.38/201-ap83_spi_controller.patch deleted file mode 100644 index b4f676e4fa..0000000000 --- a/target/linux/ar71xx/patches-2.6.38/201-ap83_spi_controller.patch +++ /dev/null @@ -1,27 +0,0 @@ ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -9,6 +9,7 @@ ccflags-$(CONFIG_SPI_DEBUG) := -DDEBUG - obj-$(CONFIG_SPI_MASTER) += spi.o - - # SPI master controller drivers (bus) -+obj-$(CONFIG_SPI_AP83) += ap83_spi.o - obj-$(CONFIG_SPI_AR71XX) += ar71xx_spi.o - obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o - obj-$(CONFIG_SPI_ATH79) += ath79_spi.o ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -61,6 +61,14 @@ config SPI_ATH79 - This enables support for the SPI controller present on the - Atheros AR71XX/AR724X/AR913X SoCs. - -+config SPI_AP83 -+ tristate "Atheros AP83 specific SPI Controller" -+ depends on SPI_MASTER && AR71XX_MACH_AP83 -+ select SPI_BITBANG -+ help -+ This is a specific SPI controller driver for the Atheros AP83 -+ reference board. -+ - config SPI_AR71XX - tristate "Atheros AR71xx SPI Controller" - depends on SPI_MASTER && ATHEROS_AR71XX diff --git a/target/linux/ar71xx/patches-2.6.38/202-spi_vsc7385_driver.patch b/target/linux/ar71xx/patches-2.6.38/202-spi_vsc7385_driver.patch deleted file mode 100644 index 86775f6626..0000000000 --- a/target/linux/ar71xx/patches-2.6.38/202-spi_vsc7385_driver.patch +++ /dev/null @@ -1,24 +0,0 @@ ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -465,6 +465,11 @@ config SPI_RB4XX_CPLD - SPI driver for the Xilinx CPLD chip present on the - MikroTik RB4xx boards. - -+config SPI_VSC7385 -+ tristate "Vitesse VSC7385 ethernet switch driver" -+ help -+ SPI driver for the Vitesse VSC7385 ethernet switch. -+ - # - # Add new SPI protocol masters in alphabetical order above this line - # ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -64,6 +64,7 @@ spi_s3c24xx_hw-$(CONFIG_SPI_S3C24XX_FIQ) - # SPI protocol drivers (device/link on bus) - obj-$(CONFIG_SPI_RB4XX_CPLD) += spi_rb4xx_cpld.o - obj-$(CONFIG_SPI_SPIDEV) += spidev.o -+obj-$(CONFIG_SPI_VSC7385) += spi_vsc7385.o - obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o - # ... add above this line ... - diff --git a/target/linux/ar71xx/patches-2.6.38/203-pb44_spi_controller.patch b/target/linux/ar71xx/patches-2.6.38/203-pb44_spi_controller.patch deleted file mode 100644 index 8e9f77085d..0000000000 --- a/target/linux/ar71xx/patches-2.6.38/203-pb44_spi_controller.patch +++ /dev/null @@ -1,27 +0,0 @@ ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -76,6 +76,14 @@ config SPI_AR71XX - help - This is the SPI contoller driver for Atheros AR71xx. - -+config SPI_PB44 -+ tristate "Atheros PB44 board specific SPI controller" -+ depends on SPI_MASTER && AR71XX_MACH_PB44 -+ select SPI_BITBANG -+ help -+ This is a specific SPI controller driver for the Atheros PB44 -+ reference board. -+ - config SPI_ATMEL - tristate "Atmel SPI Controller" - depends on (ARCH_AT91 || AVR32) ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -28,6 +28,7 @@ obj-$(CONFIG_SPI_GPIO) += spi_gpio.o - obj-$(CONFIG_SPI_GPIO_OLD) += spi_gpio_old.o - obj-$(CONFIG_SPI_IMX) += spi_imx.o - obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o -+obj-$(CONFIG_SPI_PB44) += pb44_spi.o - obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o - obj-$(CONFIG_SPI_PXA2XX_PCI) += pxa2xx_spi_pci.o - obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o diff --git a/target/linux/ar71xx/patches-2.6.38/205-wndr3700-usb-led-driver.patch b/target/linux/ar71xx/patches-2.6.38/205-wndr3700-usb-led-driver.patch deleted file mode 100644 index 9fb5ffa02e..0000000000 --- a/target/linux/ar71xx/patches-2.6.38/205-wndr3700-usb-led-driver.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/leds/Kconfig -+++ b/drivers/leds/Kconfig -@@ -377,6 +377,13 @@ config LEDS_TRIGGERS - These triggers allow kernel events to drive the LEDs and can - be configured via sysfs. If unsure, say Y. - -+config LEDS_WNDR3700_USB -+ tristate "NETGEAR WNDR3700 USB LED driver" -+ depends on LEDS_CLASS && AR71XX_MACH_WNDR3700 -+ help -+ This option enables support for the USB LED found on the -+ NETGEAR WNDR3700 board. -+ - comment "LED Triggers" - - config LEDS_TRIGGER_TIMER ---- a/drivers/leds/Makefile -+++ b/drivers/leds/Makefile -@@ -33,6 +33,7 @@ obj-$(CONFIG_LEDS_DA903X) += leds-da903 - obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o - obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o - obj-$(CONFIG_LEDS_PWM) += leds-pwm.o -+obj-${CONFIG_LEDS_WNDR3700_USB} += leds-wndr3700-usb.o - obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o - obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o - obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o diff --git a/target/linux/ar71xx/patches-2.6.38/206-nxp-74hc153-gpio-chip-driver.patch b/target/linux/ar71xx/patches-2.6.38/206-nxp-74hc153-gpio-chip-driver.patch deleted file mode 100644 index 1ff83294a3..0000000000 --- a/target/linux/ar71xx/patches-2.6.38/206-nxp-74hc153-gpio-chip-driver.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/drivers/gpio/Kconfig -+++ b/drivers/gpio/Kconfig -@@ -411,4 +411,12 @@ config GPIO_JANZ_TTL - This driver provides support for driving the pins in output - mode only. Input mode is not supported. - -+comment "Other GPIO expanders" -+ -+config GPIO_NXP_74HC153 -+ tristate "NXP 74HC153 Dual 4-input multiplexer" -+ help -+ Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This -+ provides a GPIO interface supporting inputs. -+ - endif ---- a/drivers/gpio/Makefile -+++ b/drivers/gpio/Makefile -@@ -18,6 +18,7 @@ obj-$(CONFIG_GPIO_MAX7301) += max7301.o - obj-$(CONFIG_GPIO_MAX732X) += max732x.o - obj-$(CONFIG_GPIO_MC33880) += mc33880.o - obj-$(CONFIG_GPIO_MCP23S08) += mcp23s08.o -+obj-$(CONFIG_GPIO_NXP_74HC153) += nxp_74hc153.o - obj-$(CONFIG_GPIO_74X164) += 74x164.o - obj-$(CONFIG_GPIO_PCA953X) += pca953x.o - obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o diff --git a/target/linux/ar71xx/patches-2.6.38/207-rb750-led-driver.patch b/target/linux/ar71xx/patches-2.6.38/207-rb750-led-driver.patch deleted file mode 100644 index 34ec66d283..0000000000 --- a/target/linux/ar71xx/patches-2.6.38/207-rb750-led-driver.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/drivers/leds/Kconfig -+++ b/drivers/leds/Kconfig -@@ -384,6 +384,10 @@ config LEDS_WNDR3700_USB - This option enables support for the USB LED found on the - NETGEAR WNDR3700 board. - -+config LEDS_RB750 -+ tristate "LED driver for the Mikrotik RouterBOARD 750" -+ depends on LEDS_CLASS && AR71XX_MACH_RB750 -+ - comment "LED Triggers" - - config LEDS_TRIGGER_TIMER ---- a/drivers/leds/Makefile -+++ b/drivers/leds/Makefile -@@ -40,6 +40,7 @@ obj-$(CONFIG_LEDS_LT3593) += leds-lt359 - obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o - obj-$(CONFIG_LEDS_DELL_NETBOOKS) += dell-led.o - obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o -+obj-$(CONFIG_LEDS_RB750) += leds-rb750.o - obj-$(CONFIG_LEDS_NS2) += leds-ns2.o - obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o - diff --git a/target/linux/ar71xx/patches-2.6.38/208-rb750-nand-driver.patch b/target/linux/ar71xx/patches-2.6.38/208-rb750-nand-driver.patch deleted file mode 100644 index 630a6cb69c..0000000000 --- a/target/linux/ar71xx/patches-2.6.38/208-rb750-nand-driver.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/drivers/mtd/nand/Kconfig -+++ b/drivers/mtd/nand/Kconfig -@@ -537,4 +537,8 @@ config MTD_NAND_RB4XX - tristate "NAND flash driver for RouterBoard 4xx series" - depends on MTD_NAND && AR71XX_MACH_RB4XX - -+config MTD_NAND_RB750 -+ tristate "NAND flash driver for the RouterBoard 750" -+ depends on MTD_NAND && AR71XX_MACH_RB750 -+ - endif # MTD_NAND ---- a/drivers/mtd/nand/Makefile -+++ b/drivers/mtd/nand/Makefile -@@ -34,6 +34,7 @@ obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx - obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o - obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o - obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o -+obj-$(CONFIG_MTD_NAND_RB750) += rb750_nand.o - obj-$(CONFIG_MTD_ALAUDA) += alauda.o - obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o - obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o diff --git a/target/linux/ar71xx/patches-2.6.38/300-mips_fw_myloader.patch b/target/linux/ar71xx/patches-2.6.38/300-mips_fw_myloader.patch deleted file mode 100644 index 43f96a3fb2..0000000000 --- a/target/linux/ar71xx/patches-2.6.38/300-mips_fw_myloader.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/arch/mips/Makefile -+++ b/arch/mips/Makefile -@@ -181,6 +181,7 @@ endif - # - libs-$(CONFIG_ARC) += arch/mips/fw/arc/ - libs-$(CONFIG_CFE) += arch/mips/fw/cfe/ -+libs-$(CONFIG_MYLOADER) += arch/mips/fw/myloader/ - libs-$(CONFIG_SNIPROM) += arch/mips/fw/sni/ - libs-y += arch/mips/fw/lib/ - ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -925,6 +925,9 @@ config MIPS_NILE4 - config MIPS_DISABLE_OBSOLETE_IDE - bool - -+config MYLOADER -+ bool -+ - config SYNC_R4K - bool - diff --git a/target/linux/ar71xx/patches-2.6.38/400-2.6.35-fix-nand_scan_ident-options.patch b/target/linux/ar71xx/patches-2.6.38/400-2.6.35-fix-nand_scan_ident-options.patch deleted file mode 100644 index 0b36217b6e..0000000000 --- a/target/linux/ar71xx/patches-2.6.38/400-2.6.35-fix-nand_scan_ident-options.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/drivers/mtd/nand/rb4xx_nand.c -+++ b/drivers/mtd/nand/rb4xx_nand.c -@@ -223,7 +223,7 @@ static int __init rb4xx_nand_probe(struc - - platform_set_drvdata(pdev, info); - -- ret = nand_scan_ident(&info->mtd, 1); -+ ret = nand_scan_ident(&info->mtd, 1, NULL); - if (ret) { - ret = -ENXIO; - goto err_free_info; ---- a/drivers/mtd/nand/rb750_nand.c -+++ b/drivers/mtd/nand/rb750_nand.c -@@ -287,7 +287,7 @@ static int __init rb750_nand_probe(struc - - platform_set_drvdata(pdev, info); - -- ret = nand_scan_ident(&info->mtd, 1); -+ ret = nand_scan_ident(&info->mtd, 1, NULL); - if (ret) { - ret = -ENXIO; - goto err_free_info; diff --git a/target/linux/ar71xx/patches-2.6.38/901-get_c0_compare_irq_function.patch b/target/linux/ar71xx/patches-2.6.38/901-get_c0_compare_irq_function.patch deleted file mode 100644 index 38d997ef68..0000000000 --- a/target/linux/ar71xx/patches-2.6.38/901-get_c0_compare_irq_function.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/arch/mips/kernel/traps.c -+++ b/arch/mips/kernel/traps.c -@@ -54,6 +54,7 @@ - #include - #include - #include -+#include - - extern void check_wait(void); - extern asmlinkage void r4k_wait(void); -@@ -1578,6 +1579,8 @@ void __cpuinit per_cpu_trap_init(void) - if (cpu_has_mips_r2) { - cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP; - cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7; -+ if (get_c0_compare_irq) -+ cp0_compare_irq = get_c0_compare_irq(); - cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7; - if (cp0_perfcount_irq == cp0_compare_irq) - cp0_perfcount_irq = -1; ---- a/arch/mips/include/asm/time.h -+++ b/arch/mips/include/asm/time.h -@@ -52,6 +52,7 @@ extern int (*perf_irq)(void); - */ - #ifdef CONFIG_CEVT_R4K_LIB - extern unsigned int __weak get_c0_compare_int(void); -+extern unsigned int __weak get_c0_compare_irq(void); - extern int r4k_clockevent_init(void); - #endif -