From: Matt Porter Date: Mon, 7 Oct 2013 10:23:02 +0000 (+0530) Subject: spi: add TI QSPI driver X-Git-Tag: v2013.10~38^2~9 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=1d0933eaf976ba4f3ca00356f7124b1d12ddf168;p=oweals%2Fu-boot.git spi: add TI QSPI driver Adds a SPI master driver for the TI QSPI peripheral. - Added quad read support. - Added memory mapped support. Signed-off-by: Matt Porter Signed-off-by: Sourav Poddar Signed-off-by: Jagannadha Sutradharudu Teki --- diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 91d24cea58..e5941b09f6 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -38,6 +38,7 @@ COBJS-$(CONFIG_FDT_SPI) += fdt_spi.o COBJS-$(CONFIG_TEGRA20_SFLASH) += tegra20_sflash.o COBJS-$(CONFIG_TEGRA20_SLINK) += tegra20_slink.o COBJS-$(CONFIG_TEGRA114_SPI) += tegra114_spi.o +COBJS-$(CONFIG_TI_QSPI) += ti_qspi.o COBJS-$(CONFIG_XILINX_SPI) += xilinx_spi.o COBJS-$(CONFIG_ZYNQ_SPI) += zynq_spi.o diff --git a/drivers/spi/ti_qspi.c b/drivers/spi/ti_qspi.c new file mode 100644 index 0000000000..5a5b482769 --- /dev/null +++ b/drivers/spi/ti_qspi.c @@ -0,0 +1,311 @@ +/* + * TI QSPI driver + * + * Copyright (C) 2013, Texas Instruments, Incorporated + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +/* ti qpsi register bit masks */ +#define QSPI_TIMEOUT 2000000 +#define QSPI_FCLK 192000000 +/* clock control */ +#define QSPI_CLK_EN (1 << 31) +#define QSPI_CLK_DIV_MAX 0xffff +/* command */ +#define QSPI_EN_CS(n) (n << 28) +#define QSPI_WLEN(n) ((n-1) << 19) +#define QSPI_3_PIN (1 << 18) +#define QSPI_RD_SNGL (1 << 16) +#define QSPI_WR_SNGL (2 << 16) +#define QSPI_INVAL (4 << 16) +#define QSPI_RD_QUAD (7 << 16) +/* device control */ +#define QSPI_DD(m, n) (m << (3 + n*8)) +#define QSPI_CKPHA(n) (1 << (2 + n*8)) +#define QSPI_CSPOL(n) (1 << (1 + n*8)) +#define QSPI_CKPOL(n) (1 << (n*8)) +/* status */ +#define QSPI_WC (1 << 1) +#define QSPI_BUSY (1 << 0) +#define QSPI_WC_BUSY (QSPI_WC | QSPI_BUSY) +#define QSPI_XFER_DONE QSPI_WC +#define MM_SWITCH 0x01 +#define MEM_CS 0x100 +#define MEM_CS_UNSELECT 0xfffff0ff +#define MMAP_START_ADDR 0x5c000000 +#define CORE_CTRL_IO 0x4a002558 + +#define QSPI_CMD_READ (0x3 << 0) +#define QSPI_CMD_READ_QUAD (0x6b << 0) +#define QSPI_CMD_READ_FAST (0x0b << 0) +#define QSPI_SETUP0_NUM_A_BYTES (0x2 << 8) +#define QSPI_SETUP0_NUM_D_BYTES_NO_BITS (0x0 << 10) +#define QSPI_SETUP0_NUM_D_BYTES_8_BITS (0x1 << 10) +#define QSPI_SETUP0_READ_NORMAL (0x0 << 12) +#define QSPI_SETUP0_READ_QUAD (0x3 << 12) +#define QSPI_CMD_WRITE (0x2 << 16) +#define QSPI_NUM_DUMMY_BITS (0x0 << 24) + +/* ti qspi register set */ +struct ti_qspi_regs { + u32 pid; + u32 pad0[3]; + u32 sysconfig; + u32 pad1[3]; + u32 int_stat_raw; + u32 int_stat_en; + u32 int_en_set; + u32 int_en_ctlr; + u32 intc_eoi; + u32 pad2[3]; + u32 clk_ctrl; + u32 dc; + u32 cmd; + u32 status; + u32 data; + u32 setup0; + u32 setup1; + u32 setup2; + u32 setup3; + u32 memswitch; + u32 data1; + u32 data2; + u32 data3; +}; + +/* ti qspi slave */ +struct ti_qspi_slave { + struct spi_slave slave; + struct ti_qspi_regs *base; + unsigned int mode; + u32 cmd; + u32 dc; +}; + +static inline struct ti_qspi_slave *to_ti_qspi_slave(struct spi_slave *slave) +{ + return container_of(slave, struct ti_qspi_slave, slave); +} + +static void ti_spi_setup_spi_register(struct ti_qspi_slave *qslave) +{ + struct spi_slave *slave = &qslave->slave; + u32 memval = 0; + + slave->memory_map = (void *)MMAP_START_ADDR; + + memval |= QSPI_CMD_READ | QSPI_SETUP0_NUM_A_BYTES | + QSPI_SETUP0_NUM_D_BYTES_NO_BITS | + QSPI_SETUP0_READ_NORMAL | QSPI_CMD_WRITE | + QSPI_NUM_DUMMY_BITS; + + writel(memval, &qslave->base->setup0); +} + +static void ti_spi_set_speed(struct spi_slave *slave, uint hz) +{ + struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave); + uint clk_div; + + debug("ti_spi_set_speed: hz: %d, clock divider %d\n", hz, clk_div); + + if (!hz) + clk_div = 0; + else + clk_div = (QSPI_FCLK / hz) - 1; + + /* disable SCLK */ + writel(readl(&qslave->base->clk_ctrl) & ~QSPI_CLK_EN, + &qslave->base->clk_ctrl); + + /* assign clk_div values */ + if (clk_div < 0) + clk_div = 0; + else if (clk_div > QSPI_CLK_DIV_MAX) + clk_div = QSPI_CLK_DIV_MAX; + + /* enable SCLK */ + writel(QSPI_CLK_EN | clk_div, &qslave->base->clk_ctrl); +} + +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + return 1; +} + +void spi_cs_activate(struct spi_slave *slave) +{ + /* CS handled in xfer */ + return; +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave); + + debug("spi_cs_deactivate: 0x%08x\n", (u32)slave); + + writel(qslave->cmd | QSPI_INVAL, &qslave->base->cmd); +} + +void spi_init(void) +{ + /* nothing to do */ +} + +struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int mode) +{ + struct ti_qspi_slave *qslave; + + qslave = spi_alloc_slave(struct ti_qspi_slave, bus, cs); + if (!qslave) { + printf("SPI_error: Fail to allocate ti_qspi_slave\n"); + return NULL; + } + + qslave->base = (struct ti_qspi_regs *)QSPI_BASE; + qslave->mode = mode; + + ti_spi_set_speed(&qslave->slave, max_hz); + +#ifdef CONFIG_TI_SPI_MMAP + ti_spi_setup_spi_register(qslave); +#endif + + return &qslave->slave; +} + +void spi_free_slave(struct spi_slave *slave) +{ + struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave); + free(qslave); +} + +int spi_claim_bus(struct spi_slave *slave) +{ + struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave); + + debug("spi_claim_bus: bus:%i cs:%i\n", slave->bus, slave->cs); + + qslave->dc = 0; + if (qslave->mode & SPI_CPHA) + qslave->dc |= QSPI_CKPHA(slave->cs); + if (qslave->mode & SPI_CPOL) + qslave->dc |= QSPI_CKPOL(slave->cs); + if (qslave->mode & SPI_CS_HIGH) + qslave->dc |= QSPI_CSPOL(slave->cs); + + writel(qslave->dc, &qslave->base->dc); + writel(0, &qslave->base->cmd); + writel(0, &qslave->base->data); + + return 0; +} + +void spi_release_bus(struct spi_slave *slave) +{ + struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave); + + debug("spi_release_bus: bus:%i cs:%i\n", slave->bus, slave->cs); + + writel(0, &qslave->base->dc); + writel(0, &qslave->base->cmd); + writel(0, &qslave->base->data); +} + +int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, + void *din, unsigned long flags) +{ + struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave); + uint words = bitlen >> 3; /* fixed 8-bit word length */ + const uchar *txp = dout; + uchar *rxp = din; + uint status; + int timeout, val; + + debug("spi_xfer: bus:%i cs:%i bitlen:%i words:%i flags:%lx\n", + slave->bus, slave->cs, bitlen, words, flags); + + /* Setup mmap flags */ + if (flags & SPI_XFER_MMAP) { + writel(MM_SWITCH, &qslave->base->memswitch); + val = readl(CORE_CTRL_IO); + val |= MEM_CS; + writel(val, CORE_CTRL_IO); + return 0; + } else if (flags & SPI_XFER_MMAP_END) { + writel(~MM_SWITCH, &qslave->base->memswitch); + val = readl(CORE_CTRL_IO); + val &= MEM_CS_UNSELECT; + writel(val, CORE_CTRL_IO); + return 0; + } + + if (bitlen == 0) + return -1; + + if (bitlen % 8) { + debug("spi_xfer: Non byte aligned SPI transfer\n"); + return -1; + } + + /* Setup command reg */ + qslave->cmd = 0; + qslave->cmd |= QSPI_WLEN(8); + qslave->cmd |= QSPI_EN_CS(slave->cs); + if (flags & SPI_3WIRE) + qslave->cmd |= QSPI_3_PIN; + qslave->cmd |= 0xfff; + + while (words--) { + if (txp) { + debug("tx cmd %08x dc %08x data %02x\n", + qslave->cmd | QSPI_WR_SNGL, qslave->dc, *txp); + writel(*txp++, &qslave->base->data); + writel(qslave->cmd | QSPI_WR_SNGL, + &qslave->base->cmd); + status = readl(&qslave->base->status); + timeout = QSPI_TIMEOUT; + while ((status & QSPI_WC_BUSY) != QSPI_XFER_DONE) { + if (--timeout < 0) { + printf("spi_xfer: TX timeout!\n"); + return -1; + } + status = readl(&qslave->base->status); + } + debug("tx done, status %08x\n", status); + } + if (rxp) { + qslave->cmd |= QSPI_RD_SNGL; + debug("rx cmd %08x dc %08x\n", + qslave->cmd, qslave->dc); + writel(qslave->cmd, &qslave->base->cmd); + status = readl(&qslave->base->status); + timeout = QSPI_TIMEOUT; + while ((status & QSPI_WC_BUSY) != QSPI_XFER_DONE) { + if (--timeout < 0) { + printf("spi_xfer: RX timeout!\n"); + return -1; + } + status = readl(&qslave->base->status); + } + *rxp++ = readl(&qslave->base->data); + debug("rx done, status %08x, read %02x\n", + status, *(rxp-1)); + } + } + + /* Terminate frame */ + if (flags & SPI_XFER_END) + spi_cs_deactivate(slave); + + return 0; +}