From: Simon Glass Date: Fri, 3 Jul 2015 00:15:59 +0000 (-0600) Subject: dm: power: Add support for TPS65090 FETs X-Git-Tag: v2015.10-rc2~394^2~56 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=1c88b67ec8faa33c12438cab8a5191bbab6c85e3;p=oweals%2Fu-boot.git dm: power: Add support for TPS65090 FETs The TPS65090 has 7 FETs which are modelled as regulators. This allows them to be controlled by drivers easier, accessed through the 'regulator' command and used by other drivers. Signed-off-by: Simon Glass Acked-by: Przemyslaw Marczak --- diff --git a/drivers/power/regulator/Kconfig b/drivers/power/regulator/Kconfig index 6289b83910..d0906501d0 100644 --- a/drivers/power/regulator/Kconfig +++ b/drivers/power/regulator/Kconfig @@ -61,3 +61,13 @@ config DM_REGULATOR_SANDBOX A detailed information can be found in header: '' Binding info: 'doc/device-tree-bindings/pmic/max77686.txt' + +config REGULATOR_TPS65090 + bool "Enable driver for TPS65090 PMIC regulators" + depends on PMIC_TPS65090 + ---help--- + The TPS65090 provides several FETs (Field-effect Transistors, + effectively switches) which are supported by this driver as + regulators, one for each FET. The standard regulator interface is + supported, but it is only possible to turn the regulators on or off. + There is no voltage/current control. diff --git a/drivers/power/regulator/Makefile b/drivers/power/regulator/Makefile index 96aa624961..43f4d2ce43 100644 --- a/drivers/power/regulator/Makefile +++ b/drivers/power/regulator/Makefile @@ -9,3 +9,4 @@ obj-$(CONFIG_DM_REGULATOR) += regulator-uclass.o obj-$(CONFIG_DM_REGULATOR_MAX77686) += max77686.o obj-$(CONFIG_DM_REGULATOR_FIXED) += fixed.o obj-$(CONFIG_DM_REGULATOR_SANDBOX) += sandbox.o +obj-$(CONFIG_REGULATOR_TPS65090) += tps65090_regulator.o diff --git a/drivers/power/regulator/tps65090_regulator.c b/drivers/power/regulator/tps65090_regulator.c new file mode 100644 index 0000000000..affc504071 --- /dev/null +++ b/drivers/power/regulator/tps65090_regulator.c @@ -0,0 +1,138 @@ +/* + * Copyright (c) 2015 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include + +static int tps65090_fet_probe(struct udevice *dev) +{ + struct dm_regulator_uclass_platdata *uc_pdata; + + uc_pdata = dev_get_uclass_platdata(dev); + + uc_pdata->type = REGULATOR_TYPE_OTHER; + uc_pdata->mode_count = 0; + + return 0; +} + +static bool tps65090_fet_get_enable(struct udevice *dev) +{ + struct udevice *pmic = dev_get_parent(dev); + int ret, fet_id; + + fet_id = dev->driver_data; + debug("%s: fet_id=%d\n", __func__, fet_id); + + ret = pmic_reg_read(pmic, REG_FET_BASE + fet_id); + if (ret < 0) + return ret; + + return ret & FET_CTRL_ENFET; +} + +/** + * Set the power state for a FET + * + * @param pmic pmic structure for the tps65090 + * @param fet_id FET number to set (1..MAX_FET_NUM) + * @param set 1 to power on FET, 0 to power off + * @return -EIO if we got a comms error, -EAGAIN if the FET failed to + * change state. If all is ok, returns 0. + */ +static int tps65090_fet_set(struct udevice *pmic, int fet_id, bool set) +{ + int retry; + u32 value; + int ret; + + value = FET_CTRL_ADENFET | FET_CTRL_WAIT; + if (set) + value |= FET_CTRL_ENFET; + + if (pmic_reg_write(pmic, REG_FET_BASE + fet_id, value)) + return -EIO; + + /* Try reading until we get a result */ + for (retry = 0; retry < MAX_CTRL_READ_TRIES; retry++) { + ret = pmic_reg_read(pmic, REG_FET_BASE + fet_id); + if (ret < 0) + return ret; + + /* Check that the FET went into the expected state */ + debug("%s: flags=%x\n", __func__, ret); + if (!!(ret & FET_CTRL_PGFET) == set) + return 0; + + /* If we got a timeout, there is no point in waiting longer */ + if (ret & FET_CTRL_TOFET) + break; + + mdelay(1); + } + + debug("FET %d: Power good should have set to %d but reg=%#02x\n", + fet_id, set, ret); + return -EAGAIN; +} + +static int tps65090_fet_set_enable(struct udevice *dev, bool enable) +{ + struct udevice *pmic = dev_get_parent(dev); + int ret, fet_id; + ulong start; + int loops; + + fet_id = dev->driver_data; + debug("%s: fet_id=%d, enable=%d\n", __func__, fet_id, enable); + + start = get_timer(0); + for (loops = 0;; loops++) { + ret = tps65090_fet_set(pmic, fet_id, enable); + if (!ret) + break; + + if (get_timer(start) > 100) + break; + + /* Turn it off and try again until we time out */ + tps65090_fet_set(pmic, fet_id, false); + } + + if (ret) + debug("%s: FET%d failed to power on: time=%lums, loops=%d\n", + __func__, fet_id, get_timer(start), loops); + else if (loops) + debug("%s: FET%d powered on after %lums, loops=%d\n", + __func__, fet_id, get_timer(start), loops); + + /* + * Unfortunately there are some conditions where the power-good bit + * will be 0, but the FET still comes up. One such case occurs with + * the LCD backlight on snow. We'll just return 0 here and assume + * that the FET will eventually come up. + */ + if (ret == -EAGAIN) + ret = 0; + + return ret; +} + +static const struct dm_regulator_ops tps65090_fet_ops = { + .get_enable = tps65090_fet_get_enable, + .set_enable = tps65090_fet_set_enable, +}; + +U_BOOT_DRIVER(tps65090_fet) = { + .name = TPS65090_FET_DRIVER, + .id = UCLASS_REGULATOR, + .ops = &tps65090_fet_ops, + .probe = tps65090_fet_probe, +};