From: Sanchayan Maity Date: Tue, 8 May 2018 15:34:06 +0000 (+0200) Subject: configs: apalis-tk1: fix boot failure using ext4 rootfs X-Git-Tag: v2018.07-rc1~157^2~8 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=1c1238f1e166c9ae2f4b08fa7381dc1ebd93a227;p=oweals%2Fu-boot.git configs: apalis-tk1: fix boot failure using ext4 rootfs Trying to boot from an ext4 rootfs fails due to us defaulting to ext3. While the downstream T20/T30 L4T kernel has issues with ext4 later TK1 L4T should work just fine with it. Hence enable ext4 for sdboot and usbboot on TK1. Signed-off-by: Sanchayan Maity Acked-by: Marcel Ziswiler Signed-off-by: Tom Warren --- diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h index fe8168458f..667d084611 100644 --- a/include/configs/apalis-tk1.h +++ b/include/configs/apalis-tk1.h @@ -80,7 +80,7 @@ "&& setenv dtbparam ${fdt_addr_r}\0" #define SD_BOOTCMD \ - "sdargs=ip=off root=/dev/mmcblk1p2 rw rootfstype=ext3 rootwait\0" \ + "sdargs=ip=off root=/dev/mmcblk1p2 rw rootfstype=ext4 rootwait\0" \ "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${setupargs} " \ "${vidargs}; echo Booting from SD card in 8bit slot...; " \ "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \ @@ -91,7 +91,7 @@ "&& setenv dtbparam ${fdt_addr_r}\0" #define USB_BOOTCMD \ - "usbargs=ip=off root=/dev/sda2 rw rootfstype=ext3 rootwait\0" \ + "usbargs=ip=off root=/dev/sda2 rw rootfstype=ext4 rootwait\0" \ "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \ "${usbargs} ${vidargs}; echo Booting from USB stick...; " \ "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \