From: Kumar Gala <galak@kernel.crashing.org>
Date: Tue, 4 Jan 2011 23:45:13 +0000 (-0600)
Subject: powerpc/86xx: Convert MPC8641HPCN to use common SRIO init code
X-Git-Tag: v2011.03-rc1~29^2~10
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=1b77ca8afaca8657a59a9d3ac39c3375c946365c;p=oweals%2Fu-boot.git

powerpc/86xx: Convert MPC8641HPCN to use common SRIO init code

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---

diff --git a/board/freescale/mpc8641hpcn/law.c b/board/freescale/mpc8641hpcn/law.c
index 30a7b706fa..08f1eb25ad 100644
--- a/board/freescale/mpc8641hpcn/law.c
+++ b/board/freescale/mpc8641hpcn/law.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2008,2010 Freescale Semiconductor, Inc.
+ * Copyright 2008,2010-2011 Freescale Semiconductor, Inc.
  *
  * (C) Copyright 2000
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -52,9 +52,6 @@
 struct law_entry law_table[] = {
 #if !defined(CONFIG_SPD_EEPROM)
 	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1),
-#endif
-#if defined(CONFIG_RIO)
-	SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
 #endif
 	SET_LAW(PIXIS_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_LBC),
 	SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_LBC),
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index fea0876496..0cca603ff7 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2006, 2010 Freescale Semiconductor.
+ * Copyright 2006, 2010-2011 Freescale Semiconductor.
  *
  * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
  *
@@ -57,18 +57,14 @@
  */
 #define CONFIG_SYS_SCRATCH_VA	0xe0000000
 
-/*
- * set this to enable Rapid IO.  PCI and RIO are mutually exclusive
- */
-/*#define CONFIG_RIO		1*/
+#define CONFIG_SYS_SRIO
+#define CONFIG_SRIO1			/* SRIO port 1 */
 
-#ifndef CONFIG_RIO			/* RIO/PCI are mutually exclusive */
 #define CONFIG_PCI		1	/* Enable PCI/PCIE */
 #define CONFIG_PCIE1		1	/* PCIE controler 1 (ULI bridge) */
 #define CONFIG_PCIE2		1	/* PCIE controler 2 (slot) */
 #define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
-#endif
 #define CONFIG_FSL_LAW		1	/* Use common FSL law init code */
 
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
@@ -319,13 +315,13 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /*
  * RapidIO MMU
  */
-#define CONFIG_SYS_RIO_MEM_BASE	0x80000000	/* base address */
+#define CONFIG_SYS_SRIO1_MEM_BASE	0x80000000	/* base address */
 #ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_RIO_MEM_PHYS  0x0000000c00000000ULL
+#define CONFIG_SYS_SRIO1_MEM_PHYS  0x0000000c00000000ULL
 #else
-#define CONFIG_SYS_RIO_MEM_PHYS	CONFIG_SYS_RIO_MEM_BASE
+#define CONFIG_SYS_SRIO1_MEM_PHYS	CONFIG_SYS_SRIO1_MEM_BASE
 #endif
-#define CONFIG_SYS_RIO_MEM_SIZE	0x20000000	/* 128M */
+#define CONFIG_SYS_SRIO1_MEM_SIZE	0x20000000	/* 128M */
 
 /*
  * General PCI
@@ -514,18 +510,18 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 				 | BATL_PP_RW | BATL_CACHEINHIBIT)
 #define CONFIG_SYS_IBAT2U	CONFIG_SYS_DBAT2U
 #else /* CONFIG_RIO */
-#define CONFIG_SYS_DBAT2L	(BAT_PHYS_ADDR(CONFIG_SYS_RIO_MEM_PHYS) \
+#define CONFIG_SYS_DBAT2L	(BAT_PHYS_ADDR(CONFIG_SYS_SRIO1_MEM_PHYS) \
 				 | BATL_PP_RW | BATL_CACHEINHIBIT | \
 				 BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT2U	(CONFIG_SYS_RIO_MEM_BASE | BATU_BL_512M \
+#define CONFIG_SYS_DBAT2U	(CONFIG_SYS_SRIO1_MEM_BASE | BATU_BL_512M \
 				 | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT2L	(BAT_PHYS_ADDR(CONFIG_SYS_RIO_MEM_PHYS) \
+#define CONFIG_SYS_IBAT2L	(BAT_PHYS_ADDR(CONFIG_SYS_SRIO1_MEM_PHYS) \
 				 | BATL_PP_RW | BATL_CACHEINHIBIT)
 
-#define CONFIG_SYS_DBAT2L	(CONFIG_SYS_RIO_MEM_PHYS | BATL_PP_RW \
+#define CONFIG_SYS_DBAT2L	(CONFIG_SYS_SRIO1_MEM_PHYS | BATL_PP_RW \
 			| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT2U	(CONFIG_SYS_RIO_MEM_PHYS | BATU_BL_512M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_RIO_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_DBAT2U	(CONFIG_SYS_SRIO1_MEM_PHYS | BATU_BL_512M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_SRIO1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
 #define CONFIG_SYS_IBAT2U	CONFIG_SYS_DBAT2U
 #endif