From: Christoph Muellner Date: Wed, 12 Dec 2018 00:32:59 +0000 (+0100) Subject: rockchip: rk3399-puma: Remove obsolete DTS node 'vcc5v0_host'. X-Git-Tag: v2019.01-rc2~4^2~2 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=1ae5cd02267f8c2b01039769ccce44979f20e934;p=oweals%2Fu-boot.git rockchip: rk3399-puma: Remove obsolete DTS node 'vcc5v0_host'. vcc5v0_host and usbhub_enable share gpio4 RK_PA3, which is a problem during probing (the second probe will trigger a -EBUSY, when trying to get the gpio handle). An analysis of the situation shows, that both regulators are actually describing the same supply. This patch removes the (currenlty not successful probing) regulator vcc5v0_host from the DTS and adds the pinctrl-* setting to usbhub_enable. Signed-off-by: Christoph Muellner Reviewed-by: Phiilipp Tomsich --- diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi index ba9bb4c599..9a61fbb453 100644 --- a/arch/arm/dts/rk3399-puma.dtsi +++ b/arch/arm/dts/rk3399-puma.dtsi @@ -95,6 +95,8 @@ regulator-name = "usbhub_enable"; enable-active-low; gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -146,16 +148,6 @@ regulator-always-on; }; - vcc5v0_host: vcc5v0-host-regulator { - compatible = "regulator-fixed"; - enable-active-low; - gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&host_vbus_drv>; - regulator-name = "vcc5v0_host"; - regulator-always-on; - }; - vcc5v0_sys: vcc5v0-sys { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys";