From: Marek Vasut Date: Wed, 25 May 2016 00:17:07 +0000 (+0200) Subject: mips: Drop JZ4740 remnants X-Git-Tag: v2016.07-rc1~168^2~2 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=1ad3a6fb5b9eb8444281c3975de6c6b7e1549c53;p=oweals%2Fu-boot.git mips: Drop JZ4740 remnants Remove the remnants of JZ4740 support. Signed-off-by: Marek Vasut Cc: Daniel Schwierzeck Cc: Paul Burton --- diff --git a/arch/mips/include/asm/global_data.h b/arch/mips/include/asm/global_data.h index 3f230b08f6..37f8ed52e6 100644 --- a/arch/mips/include/asm/global_data.h +++ b/arch/mips/include/asm/global_data.h @@ -15,14 +15,6 @@ struct arch_global_data { #ifdef CONFIG_DYNAMIC_IO_PORT_BASE unsigned long io_port_base; #endif -#ifdef CONFIG_JZSOC - /* There are other clocks in the jz4740 */ - unsigned long per_clk; /* Peripheral bus clock */ - unsigned long dev_clk; /* Device clock */ - unsigned long sys_clk; - unsigned long tbl; - unsigned long lastinc; -#endif #ifdef CONFIG_ARCH_ATH79 unsigned long id; unsigned long soc; diff --git a/arch/mips/include/asm/jz4740.h b/arch/mips/include/asm/jz4740.h deleted file mode 100644 index 7a7cfff29a..0000000000 --- a/arch/mips/include/asm/jz4740.h +++ /dev/null @@ -1,1150 +0,0 @@ -/* - * head file for Ingenic Semiconductor's JZ4740 CPU. - */ -#ifndef __JZ4740_H__ -#define __JZ4740_H__ - -#include -#include - -/* Boot ROM Specification */ -/* NOR Boot config */ -#define JZ4740_NORBOOT_8BIT 0x00000000 /* 8-bit data bus flash */ -#define JZ4740_NORBOOT_16BIT 0x10101010 /* 16-bit data bus flash */ -#define JZ4740_NORBOOT_32BIT 0x20202020 /* 32-bit data bus flash */ -/* NAND Boot config */ -#define JZ4740_NANDBOOT_B8R3 0xffffffff /* 8-bit bus & 3 row cycles */ -#define JZ4740_NANDBOOT_B8R2 0xf0f0f0f0 /* 8-bit bus & 2 row cycles */ -#define JZ4740_NANDBOOT_B16R3 0x0f0f0f0f /* 16-bit bus & 3 row cycles */ -#define JZ4740_NANDBOOT_B16R2 0x00000000 /* 16-bit bus & 2 row cycles */ - -/* 1st-level interrupts */ -#define JZ4740_IRQ_I2C 1 -#define JZ4740_IRQ_UHC 3 -#define JZ4740_IRQ_UART0 9 -#define JZ4740_IRQ_SADC 12 -#define JZ4740_IRQ_MSC 14 -#define JZ4740_IRQ_RTC 15 -#define JZ4740_IRQ_SSI 16 -#define JZ4740_IRQ_CIM 17 -#define JZ4740_IRQ_AIC 18 -#define JZ4740_IRQ_ETH 19 -#define JZ4740_IRQ_DMAC 20 -#define JZ4740_IRQ_TCU2 21 -#define JZ4740_IRQ_TCU1 22 -#define JZ4740_IRQ_TCU0 23 -#define JZ4740_IRQ_UDC 24 -#define JZ4740_IRQ_GPIO3 25 -#define JZ4740_IRQ_GPIO2 26 -#define JZ4740_IRQ_GPIO1 27 -#define JZ4740_IRQ_GPIO0 28 -#define JZ4740_IRQ_IPU 29 -#define JZ4740_IRQ_LCD 30 -/* 2nd-level interrupts */ -#define JZ4740_IRQ_DMA_0 32 /* 32 to 37 for DMAC channel 0 to 5 */ -#define JZ4740_IRQ_GPIO_0 48 /* 48 to 175 for GPIO pin 0 to 127 */ - -/* Register Definitions */ -#define JZ4740_CPM_BASE 0x10000000 -#define JZ4740_INTC_BASE 0x10001000 -#define JZ4740_TCU_BASE 0x10002000 -#define JZ4740_WDT_BASE 0x10002000 -#define JZ4740_RTC_BASE 0x10003000 -#define JZ4740_GPIO_BASE 0x10010000 -#define JZ4740_AIC_BASE 0x10020000 -#define JZ4740_ICDC_BASE 0x10020000 -#define JZ4740_MSC_BASE 0x10021000 -#define JZ4740_UART0_BASE 0x10030000 -#define JZ4740_I2C_BASE 0x10042000 -#define JZ4740_SSI_BASE 0x10043000 -#define JZ4740_SADC_BASE 0x10070000 -#define JZ4740_EMC_BASE 0x13010000 -#define JZ4740_DMAC_BASE 0x13020000 -#define JZ4740_UHC_BASE 0x13030000 -#define JZ4740_UDC_BASE 0x13040000 -#define JZ4740_LCD_BASE 0x13050000 -#define JZ4740_SLCD_BASE 0x13050000 -#define JZ4740_CIM_BASE 0x13060000 -#define JZ4740_ETH_BASE 0x13100000 - -/* 8bit Mode Register of SDRAM bank 0 */ -#define JZ4740_EMC_SDMR0 (JZ4740_EMC_BASE + 0xa000) - -/* GPIO (General-Purpose I/O Ports) */ -/* = 0,1,2,3 */ -#define GPIO_PXPIN(n) \ - (JZ4740_GPIO_BASE + (0x00 + (n)*0x100)) /* PIN Level Register */ -#define GPIO_PXDAT(n) \ - (JZ4740_GPIO_BASE + (0x10 + (n)*0x100)) /* Port Data Register */ -#define GPIO_PXDATS(n) \ - (JZ4740_GPIO_BASE + (0x14 + (n)*0x100)) /* Port Data Set Register */ -#define GPIO_PXDATC(n) \ - (JZ4740_GPIO_BASE + (0x18 + (n)*0x100)) /* Port Data Clear Register */ -#define GPIO_PXIM(n) \ - (JZ4740_GPIO_BASE + (0x20 + (n)*0x100)) /* Interrupt Mask Register */ -#define GPIO_PXIMS(n) \ - (JZ4740_GPIO_BASE + (0x24 + (n)*0x100)) /* Interrupt Mask Set Reg */ -#define GPIO_PXIMC(n) \ - (JZ4740_GPIO_BASE + (0x28 + (n)*0x100)) /* Interrupt Mask Clear Reg */ -#define GPIO_PXPE(n) \ - (JZ4740_GPIO_BASE + (0x30 + (n)*0x100)) /* Pull Enable Register */ -#define GPIO_PXPES(n) \ - (JZ4740_GPIO_BASE + (0x34 + (n)*0x100)) /* Pull Enable Set Reg. */ -#define GPIO_PXPEC(n) \ - (JZ4740_GPIO_BASE + (0x38 + (n)*0x100)) /* Pull Enable Clear Reg. */ -#define GPIO_PXFUN(n) \ - (JZ4740_GPIO_BASE + (0x40 + (n)*0x100)) /* Function Register */ -#define GPIO_PXFUNS(n) \ - (JZ4740_GPIO_BASE + (0x44 + (n)*0x100)) /* Function Set Register */ -#define GPIO_PXFUNC(n) \ - (JZ4740_GPIO_BASE + (0x48 + (n)*0x100)) /* Function Clear Register */ -#define GPIO_PXSEL(n) \ - (JZ4740_GPIO_BASE + (0x50 + (n)*0x100)) /* Select Register */ -#define GPIO_PXSELS(n) \ - (JZ4740_GPIO_BASE + (0x54 + (n)*0x100)) /* Select Set Register */ -#define GPIO_PXSELC(n) \ - (JZ4740_GPIO_BASE + (0x58 + (n)*0x100)) /* Select Clear Register */ -#define GPIO_PXDIR(n) \ - (JZ4740_GPIO_BASE + (0x60 + (n)*0x100)) /* Direction Register */ -#define GPIO_PXDIRS(n) \ - (JZ4740_GPIO_BASE + (0x64 + (n)*0x100)) /* Direction Set Register */ -#define GPIO_PXDIRC(n) \ - (JZ4740_GPIO_BASE + (0x68 + (n)*0x100)) /* Direction Clear Register */ -#define GPIO_PXTRG(n) \ - (JZ4740_GPIO_BASE + (0x70 + (n)*0x100)) /* Trigger Register */ -#define GPIO_PXTRGS(n) \ - (JZ4740_GPIO_BASE + (0x74 + (n)*0x100)) /* Trigger Set Register */ -#define GPIO_PXTRGC(n) \ - (JZ4740_GPIO_BASE + (0x78 + (n)*0x100)) /* Trigger Set Register */ - -/* Static Memory Control Register */ -#define EMC_SMCR_STRV_BIT 24 -#define EMC_SMCR_STRV_MASK (0x0f << EMC_SMCR_STRV_BIT) -#define EMC_SMCR_TAW_BIT 20 -#define EMC_SMCR_TAW_MASK (0x0f << EMC_SMCR_TAW_BIT) -#define EMC_SMCR_TBP_BIT 16 -#define EMC_SMCR_TBP_MASK (0x0f << EMC_SMCR_TBP_BIT) -#define EMC_SMCR_TAH_BIT 12 -#define EMC_SMCR_TAH_MASK (0x07 << EMC_SMCR_TAH_BIT) -#define EMC_SMCR_TAS_BIT 8 -#define EMC_SMCR_TAS_MASK (0x07 << EMC_SMCR_TAS_BIT) -#define EMC_SMCR_BW_BIT 6 -#define EMC_SMCR_BW_MASK (0x03 << EMC_SMCR_BW_BIT) - #define EMC_SMCR_BW_8BIT (0 << EMC_SMCR_BW_BIT) - #define EMC_SMCR_BW_16BIT (1 << EMC_SMCR_BW_BIT) - #define EMC_SMCR_BW_32BIT (2 << EMC_SMCR_BW_BIT) -#define EMC_SMCR_BCM (1 << 3) -#define EMC_SMCR_BL_BIT 1 -#define EMC_SMCR_BL_MASK (0x03 << EMC_SMCR_BL_BIT) - #define EMC_SMCR_BL_4 (0 << EMC_SMCR_BL_BIT) - #define EMC_SMCR_BL_8 (1 << EMC_SMCR_BL_BIT) - #define EMC_SMCR_BL_16 (2 << EMC_SMCR_BL_BIT) - #define EMC_SMCR_BL_32 (3 << EMC_SMCR_BL_BIT) -#define EMC_SMCR_SMT (1 << 0) - -/* Static Memory Bank Addr Config Reg */ -#define EMC_SACR_BASE_BIT 8 -#define EMC_SACR_BASE_MASK (0xff << EMC_SACR_BASE_BIT) -#define EMC_SACR_MASK_BIT 0 -#define EMC_SACR_MASK_MASK (0xff << EMC_SACR_MASK_BIT) - -/* NAND Flash Control/Status Register */ -#define EMC_NFCSR_NFCE4 (1 << 7) /* NAND Flash Enable */ -#define EMC_NFCSR_NFE4 (1 << 6) /* NAND Flash FCE# Assertion Enable */ -#define EMC_NFCSR_NFCE3 (1 << 5) -#define EMC_NFCSR_NFE3 (1 << 4) -#define EMC_NFCSR_NFCE2 (1 << 3) -#define EMC_NFCSR_NFE2 (1 << 2) -#define EMC_NFCSR_NFCE1 (1 << 1) -#define EMC_NFCSR_NFE1 (1 << 0) - -/* NAND Flash ECC Control Register */ -#define EMC_NFECR_PRDY (1 << 4) /* Parity Ready */ -#define EMC_NFECR_RS_DECODING (0 << 3) /* RS is in decoding phase */ -#define EMC_NFECR_RS_ENCODING (1 << 3) /* RS is in encoding phase */ -#define EMC_NFECR_HAMMING (0 << 2) /* Use HAMMING Correction Algorithm */ -#define EMC_NFECR_RS (1 << 2) /* Select RS Correction Algorithm */ -#define EMC_NFECR_ERST (1 << 1) /* ECC Reset */ -#define EMC_NFECR_ECCE (1 << 0) /* ECC Enable */ - -/* NAND Flash ECC Data Register */ -#define EMC_NFECC_ECC2_BIT 16 -#define EMC_NFECC_ECC2_MASK (0xff << EMC_NFECC_ECC2_BIT) -#define EMC_NFECC_ECC1_BIT 8 -#define EMC_NFECC_ECC1_MASK (0xff << EMC_NFECC_ECC1_BIT) -#define EMC_NFECC_ECC0_BIT 0 -#define EMC_NFECC_ECC0_MASK (0xff << EMC_NFECC_ECC0_BIT) - -/* NAND Flash Interrupt Status Register */ -#define EMC_NFINTS_ERRCNT_BIT 29 /* Error Count */ -#define EMC_NFINTS_ERRCNT_MASK (0x7 << EMC_NFINTS_ERRCNT_BIT) -#define EMC_NFINTS_PADF (1 << 4) /* Padding Finished */ -#define EMC_NFINTS_DECF (1 << 3) /* Decoding Finished */ -#define EMC_NFINTS_ENCF (1 << 2) /* Encoding Finished */ -#define EMC_NFINTS_UNCOR (1 << 1) /* Uncorrectable Error Occurred */ -#define EMC_NFINTS_ERR (1 << 0) /* Error Occurred */ - -/* NAND Flash Interrupt Enable Register */ -#define EMC_NFINTE_PADFE (1 << 4) /* Padding Finished Interrupt */ -#define EMC_NFINTE_DECFE (1 << 3) /* Decoding Finished Interrupt */ -#define EMC_NFINTE_ENCFE (1 << 2) /* Encoding Finished Interrupt */ -#define EMC_NFINTE_UNCORE (1 << 1) /* Uncorrectable Error Occurred Intr */ -#define EMC_NFINTE_ERRE (1 << 0) /* Error Occurred Interrupt */ - -/* NAND Flash RS Error Report Register */ -#define EMC_NFERR_INDEX_BIT 16 /* Error Symbol Index */ -#define EMC_NFERR_INDEX_MASK (0x1ff << EMC_NFERR_INDEX_BIT) -#define EMC_NFERR_MASK_BIT 0 /* Error Symbol Value */ -#define EMC_NFERR_MASK_MASK (0x1ff << EMC_NFERR_MASK_BIT) - -/* DRAM Control Register */ -#define EMC_DMCR_BW_BIT 31 -#define EMC_DMCR_BW (1 << EMC_DMCR_BW_BIT) -#define EMC_DMCR_CA_BIT 26 -#define EMC_DMCR_CA_MASK (0x07 << EMC_DMCR_CA_BIT) - #define EMC_DMCR_CA_8 (0 << EMC_DMCR_CA_BIT) - #define EMC_DMCR_CA_9 (1 << EMC_DMCR_CA_BIT) - #define EMC_DMCR_CA_10 (2 << EMC_DMCR_CA_BIT) - #define EMC_DMCR_CA_11 (3 << EMC_DMCR_CA_BIT) - #define EMC_DMCR_CA_12 (4 << EMC_DMCR_CA_BIT) -#define EMC_DMCR_RMODE (1 << 25) -#define EMC_DMCR_RFSH (1 << 24) -#define EMC_DMCR_MRSET (1 << 23) -#define EMC_DMCR_RA_BIT 20 -#define EMC_DMCR_RA_MASK (0x03 << EMC_DMCR_RA_BIT) - #define EMC_DMCR_RA_11 (0 << EMC_DMCR_RA_BIT) - #define EMC_DMCR_RA_12 (1 << EMC_DMCR_RA_BIT) - #define EMC_DMCR_RA_13 (2 << EMC_DMCR_RA_BIT) -#define EMC_DMCR_BA_BIT 19 -#define EMC_DMCR_BA (1 << EMC_DMCR_BA_BIT) -#define EMC_DMCR_PDM (1 << 18) -#define EMC_DMCR_EPIN (1 << 17) -#define EMC_DMCR_TRAS_BIT 13 -#define EMC_DMCR_TRAS_MASK (0x07 << EMC_DMCR_TRAS_BIT) -#define EMC_DMCR_RCD_BIT 11 -#define EMC_DMCR_RCD_MASK (0x03 << EMC_DMCR_RCD_BIT) -#define EMC_DMCR_TPC_BIT 8 -#define EMC_DMCR_TPC_MASK (0x07 << EMC_DMCR_TPC_BIT) -#define EMC_DMCR_TRWL_BIT 5 -#define EMC_DMCR_TRWL_MASK (0x03 << EMC_DMCR_TRWL_BIT) -#define EMC_DMCR_TRC_BIT 2 -#define EMC_DMCR_TRC_MASK (0x07 << EMC_DMCR_TRC_BIT) -#define EMC_DMCR_TCL_BIT 0 -#define EMC_DMCR_TCL_MASK (0x03 << EMC_DMCR_TCL_BIT) - -/* Refresh Time Control/Status Register */ -#define EMC_RTCSR_CMF (1 << 7) -#define EMC_RTCSR_CKS_BIT 0 -#define EMC_RTCSR_CKS_MASK (0x07 << EMC_RTCSR_CKS_BIT) - #define EMC_RTCSR_CKS_DISABLE (0 << EMC_RTCSR_CKS_BIT) - #define EMC_RTCSR_CKS_4 (1 << EMC_RTCSR_CKS_BIT) - #define EMC_RTCSR_CKS_16 (2 << EMC_RTCSR_CKS_BIT) - #define EMC_RTCSR_CKS_64 (3 << EMC_RTCSR_CKS_BIT) - #define EMC_RTCSR_CKS_256 (4 << EMC_RTCSR_CKS_BIT) - #define EMC_RTCSR_CKS_1024 (5 << EMC_RTCSR_CKS_BIT) - #define EMC_RTCSR_CKS_2048 (6 << EMC_RTCSR_CKS_BIT) - #define EMC_RTCSR_CKS_4096 (7 << EMC_RTCSR_CKS_BIT) - -/* SDRAM Bank Address Configuration Register */ -#define EMC_DMAR_BASE_BIT 8 -#define EMC_DMAR_BASE_MASK (0xff << EMC_DMAR_BASE_BIT) -#define EMC_DMAR_MASK_BIT 0 -#define EMC_DMAR_MASK_MASK (0xff << EMC_DMAR_MASK_BIT) - -/* Mode Register of SDRAM bank 0 */ -#define EMC_SDMR_BM (1 << 9) /* Write Burst Mode */ -#define EMC_SDMR_OM_BIT 7 /* Operating Mode */ -#define EMC_SDMR_OM_MASK (3 << EMC_SDMR_OM_BIT) - #define EMC_SDMR_OM_NORMAL (0 << EMC_SDMR_OM_BIT) -#define EMC_SDMR_CAS_BIT 4 /* CAS Latency */ -#define EMC_SDMR_CAS_MASK (7 << EMC_SDMR_CAS_BIT) - #define EMC_SDMR_CAS_1 (1 << EMC_SDMR_CAS_BIT) - #define EMC_SDMR_CAS_2 (2 << EMC_SDMR_CAS_BIT) - #define EMC_SDMR_CAS_3 (3 << EMC_SDMR_CAS_BIT) -#define EMC_SDMR_BT_BIT 3 /* Burst Type */ -#define EMC_SDMR_BT_MASK (1 << EMC_SDMR_BT_BIT) - #define EMC_SDMR_BT_SEQ (0 << EMC_SDMR_BT_BIT) /* Sequential */ - #define EMC_SDMR_BT_INT (1 << EMC_SDMR_BT_BIT) /* Interleave */ -#define EMC_SDMR_BL_BIT 0 /* Burst Length */ -#define EMC_SDMR_BL_MASK (7 << EMC_SDMR_BL_BIT) - #define EMC_SDMR_BL_1 (0 << EMC_SDMR_BL_BIT) - #define EMC_SDMR_BL_2 (1 << EMC_SDMR_BL_BIT) - #define EMC_SDMR_BL_4 (2 << EMC_SDMR_BL_BIT) - #define EMC_SDMR_BL_8 (3 << EMC_SDMR_BL_BIT) - -#define EMC_SDMR_CAS2_16BIT \ - (EMC_SDMR_CAS_2 | EMC_SDMR_BT_SEQ | EMC_SDMR_BL_2) -#define EMC_SDMR_CAS2_32BIT \ - (EMC_SDMR_CAS_2 | EMC_SDMR_BT_SEQ | EMC_SDMR_BL_4) -#define EMC_SDMR_CAS3_16BIT \ - (EMC_SDMR_CAS_3 | EMC_SDMR_BT_SEQ | EMC_SDMR_BL_2) -#define EMC_SDMR_CAS3_32BIT \ - (EMC_SDMR_CAS_3 | EMC_SDMR_BT_SEQ | EMC_SDMR_BL_4) - -/* RTC Control Register */ -#define RTC_RCR_WRDY (1 << 7) /* Write Ready Flag */ -#define RTC_RCR_HZ (1 << 6) /* 1Hz Flag */ -#define RTC_RCR_HZIE (1 << 5) /* 1Hz Interrupt Enable */ -#define RTC_RCR_AF (1 << 4) /* Alarm Flag */ -#define RTC_RCR_AIE (1 << 3) /* Alarm Interrupt Enable */ -#define RTC_RCR_AE (1 << 2) /* Alarm Enable */ -#define RTC_RCR_RTCE (1 << 0) /* RTC Enable */ - -/* RTC Regulator Register */ -#define RTC_RGR_LOCK (1 << 31) /* Lock Bit */ -#define RTC_RGR_ADJC_BIT 16 -#define RTC_RGR_ADJC_MASK (0x3ff << RTC_RGR_ADJC_BIT) -#define RTC_RGR_NC1HZ_BIT 0 -#define RTC_RGR_NC1HZ_MASK (0xffff << RTC_RGR_NC1HZ_BIT) - -/* Hibernate Control Register */ -#define RTC_HCR_PD (1 << 0) /* Power Down */ - -/* Hibernate Wakeup Filter Counter Register */ -#define RTC_HWFCR_BIT 5 -#define RTC_HWFCR_MASK (0x7ff << RTC_HWFCR_BIT) - -/* Hibernate Reset Counter Register */ -#define RTC_HRCR_BIT 5 -#define RTC_HRCR_MASK (0x7f << RTC_HRCR_BIT) - -/* Hibernate Wakeup Control Register */ -#define RTC_HWCR_EALM (1 << 0) /* RTC alarm wakeup enable */ - -/* Hibernate Wakeup Status Register */ -#define RTC_HWRSR_HR (1 << 5) /* Hibernate reset */ -#define RTC_HWRSR_PPR (1 << 4) /* PPR reset */ -#define RTC_HWRSR_PIN (1 << 1) /* Wakeup pin status bit */ -#define RTC_HWRSR_ALM (1 << 0) /* RTC alarm status bit */ - -/* Clock Control Register */ -#define CPM_CPCCR_I2CS (1 << 31) -#define CPM_CPCCR_CLKOEN (1 << 30) -#define CPM_CPCCR_UCS (1 << 29) -#define CPM_CPCCR_UDIV_BIT 23 -#define CPM_CPCCR_UDIV_MASK (0x3f << CPM_CPCCR_UDIV_BIT) -#define CPM_CPCCR_CE (1 << 22) -#define CPM_CPCCR_PCS (1 << 21) -#define CPM_CPCCR_LDIV_BIT 16 -#define CPM_CPCCR_LDIV_MASK (0x1f << CPM_CPCCR_LDIV_BIT) -#define CPM_CPCCR_MDIV_BIT 12 -#define CPM_CPCCR_MDIV_MASK (0x0f << CPM_CPCCR_MDIV_BIT) -#define CPM_CPCCR_PDIV_BIT 8 -#define CPM_CPCCR_PDIV_MASK (0x0f << CPM_CPCCR_PDIV_BIT) -#define CPM_CPCCR_HDIV_BIT 4 -#define CPM_CPCCR_HDIV_MASK (0x0f << CPM_CPCCR_HDIV_BIT) -#define CPM_CPCCR_CDIV_BIT 0 -#define CPM_CPCCR_CDIV_MASK (0x0f << CPM_CPCCR_CDIV_BIT) - -/* I2S Clock Divider Register */ -#define CPM_I2SCDR_I2SDIV_BIT 0 -#define CPM_I2SCDR_I2SDIV_MASK (0x1ff << CPM_I2SCDR_I2SDIV_BIT) - -/* LCD Pixel Clock Divider Register */ -#define CPM_LPCDR_PIXDIV_BIT 0 -#define CPM_LPCDR_PIXDIV_MASK (0x1ff << CPM_LPCDR_PIXDIV_BIT) - -/* MSC Clock Divider Register */ -#define CPM_MSCCDR_MSCDIV_BIT 0 -#define CPM_MSCCDR_MSCDIV_MASK (0x1f << CPM_MSCCDR_MSCDIV_BIT) - -/* PLL Control Register */ -#define CPM_CPPCR_PLLM_BIT 23 -#define CPM_CPPCR_PLLM_MASK (0x1ff << CPM_CPPCR_PLLM_BIT) -#define CPM_CPPCR_PLLN_BIT 18 -#define CPM_CPPCR_PLLN_MASK (0x1f << CPM_CPPCR_PLLN_BIT) -#define CPM_CPPCR_PLLOD_BIT 16 -#define CPM_CPPCR_PLLOD_MASK (0x03 << CPM_CPPCR_PLLOD_BIT) -#define CPM_CPPCR_PLLS (1 << 10) -#define CPM_CPPCR_PLLBP (1 << 9) -#define CPM_CPPCR_PLLEN (1 << 8) -#define CPM_CPPCR_PLLST_BIT 0 -#define CPM_CPPCR_PLLST_MASK (0xff << CPM_CPPCR_PLLST_BIT) - -/* Low Power Control Register */ -#define CPM_LCR_DOZE_DUTY_BIT 3 -#define CPM_LCR_DOZE_DUTY_MASK (0x1f << CPM_LCR_DOZE_DUTY_BIT) -#define CPM_LCR_DOZE_ON (1 << 2) -#define CPM_LCR_LPM_BIT 0 -#define CPM_LCR_LPM_MASK (0x3 << CPM_LCR_LPM_BIT) - #define CPM_LCR_LPM_IDLE (0x0 << CPM_LCR_LPM_BIT) - #define CPM_LCR_LPM_SLEEP (0x1 << CPM_LCR_LPM_BIT) - -/* Clock Gate Register */ -#define CPM_CLKGR_UART1 (1 << 15) -#define CPM_CLKGR_UHC (1 << 14) -#define CPM_CLKGR_IPU (1 << 13) -#define CPM_CLKGR_DMAC (1 << 12) -#define CPM_CLKGR_UDC (1 << 11) -#define CPM_CLKGR_LCD (1 << 10) -#define CPM_CLKGR_CIM (1 << 9) -#define CPM_CLKGR_SADC (1 << 8) -#define CPM_CLKGR_MSC (1 << 7) -#define CPM_CLKGR_AIC1 (1 << 6) -#define CPM_CLKGR_AIC2 (1 << 5) -#define CPM_CLKGR_SSI (1 << 4) -#define CPM_CLKGR_I2C (1 << 3) -#define CPM_CLKGR_RTC (1 << 2) -#define CPM_CLKGR_TCU (1 << 1) -#define CPM_CLKGR_UART0 (1 << 0) - -/* Sleep Control Register */ -#define CPM_SCR_O1ST_BIT 8 -#define CPM_SCR_O1ST_MASK (0xff << CPM_SCR_O1ST_BIT) -#define CPM_SCR_UDCPHY_ENABLE (1 << 6) -#define CPM_SCR_USBPHY_DISABLE (1 << 7) -#define CPM_SCR_OSC_ENABLE (1 << 4) - -/* Hibernate Control Register */ -#define CPM_HCR_PD (1 << 0) - -/* Wakeup Filter Counter Register in Hibernate Mode */ -#define CPM_HWFCR_TIME_BIT 0 -#define CPM_HWFCR_TIME_MASK (0x3ff << CPM_HWFCR_TIME_BIT) - -/* Reset Counter Register in Hibernate Mode */ -#define CPM_HRCR_TIME_BIT 0 -#define CPM_HRCR_TIME_MASK (0x7f << CPM_HRCR_TIME_BIT) - -/* Wakeup Control Register in Hibernate Mode */ -#define CPM_HWCR_WLE_LOW (0 << 2) -#define CPM_HWCR_WLE_HIGH (1 << 2) -#define CPM_HWCR_PIN_WAKEUP (1 << 1) -#define CPM_HWCR_RTC_WAKEUP (1 << 0) - -/* Wakeup Status Register in Hibernate Mode */ -#define CPM_HWSR_WSR_PIN (1 << 1) -#define CPM_HWSR_WSR_RTC (1 << 0) - -/* Reset Status Register */ -#define CPM_RSR_HR (1 << 2) -#define CPM_RSR_WR (1 << 1) -#define CPM_RSR_PR (1 << 0) - -/* Register definitions */ -#define TCU_TCSR_PWM_SD (1 << 9) -#define TCU_TCSR_PWM_INITL_HIGH (1 << 8) -#define TCU_TCSR_PWM_EN (1 << 7) -#define TCU_TCSR_PRESCALE_BIT 3 -#define TCU_TCSR_PRESCALE_MASK (0x7 << TCU_TCSR_PRESCALE_BIT) -#define TCU_TCSR_PRESCALE1 (0x0 << TCU_TCSR_PRESCALE_BIT) -#define TCU_TCSR_PRESCALE4 (0x1 << TCU_TCSR_PRESCALE_BIT) -#define TCU_TCSR_PRESCALE16 (0x2 << TCU_TCSR_PRESCALE_BIT) -#define TCU_TCSR_PRESCALE64 (0x3 << TCU_TCSR_PRESCALE_BIT) -#define TCU_TCSR_PRESCALE256 (0x4 << TCU_TCSR_PRESCALE_BIT) -#define TCU_TCSR_PRESCALE1024 (0x5 << TCU_TCSR_PRESCALE_BIT) -#define TCU_TCSR_EXT_EN (1 << 2) -#define TCU_TCSR_RTC_EN (1 << 1) -#define TCU_TCSR_PCK_EN (1 << 0) - -#define TCU_TER_TCEN5 (1 << 5) -#define TCU_TER_TCEN4 (1 << 4) -#define TCU_TER_TCEN3 (1 << 3) -#define TCU_TER_TCEN2 (1 << 2) -#define TCU_TER_TCEN1 (1 << 1) -#define TCU_TER_TCEN0 (1 << 0) - -#define TCU_TESR_TCST5 (1 << 5) -#define TCU_TESR_TCST4 (1 << 4) -#define TCU_TESR_TCST3 (1 << 3) -#define TCU_TESR_TCST2 (1 << 2) -#define TCU_TESR_TCST1 (1 << 1) -#define TCU_TESR_TCST0 (1 << 0) - -#define TCU_TECR_TCCL5 (1 << 5) -#define TCU_TECR_TCCL4 (1 << 4) -#define TCU_TECR_TCCL3 (1 << 3) -#define TCU_TECR_TCCL2 (1 << 2) -#define TCU_TECR_TCCL1 (1 << 1) -#define TCU_TECR_TCCL0 (1 << 0) - -#define TCU_TFR_HFLAG5 (1 << 21) -#define TCU_TFR_HFLAG4 (1 << 20) -#define TCU_TFR_HFLAG3 (1 << 19) -#define TCU_TFR_HFLAG2 (1 << 18) -#define TCU_TFR_HFLAG1 (1 << 17) -#define TCU_TFR_HFLAG0 (1 << 16) -#define TCU_TFR_FFLAG5 (1 << 5) -#define TCU_TFR_FFLAG4 (1 << 4) -#define TCU_TFR_FFLAG3 (1 << 3) -#define TCU_TFR_FFLAG2 (1 << 2) -#define TCU_TFR_FFLAG1 (1 << 1) -#define TCU_TFR_FFLAG0 (1 << 0) - -#define TCU_TFSR_HFLAG5 (1 << 21) -#define TCU_TFSR_HFLAG4 (1 << 20) -#define TCU_TFSR_HFLAG3 (1 << 19) -#define TCU_TFSR_HFLAG2 (1 << 18) -#define TCU_TFSR_HFLAG1 (1 << 17) -#define TCU_TFSR_HFLAG0 (1 << 16) -#define TCU_TFSR_FFLAG5 (1 << 5) -#define TCU_TFSR_FFLAG4 (1 << 4) -#define TCU_TFSR_FFLAG3 (1 << 3) -#define TCU_TFSR_FFLAG2 (1 << 2) -#define TCU_TFSR_FFLAG1 (1 << 1) -#define TCU_TFSR_FFLAG0 (1 << 0) - -#define TCU_TFCR_HFLAG5 (1 << 21) -#define TCU_TFCR_HFLAG4 (1 << 20) -#define TCU_TFCR_HFLAG3 (1 << 19) -#define TCU_TFCR_HFLAG2 (1 << 18) -#define TCU_TFCR_HFLAG1 (1 << 17) -#define TCU_TFCR_HFLAG0 (1 << 16) -#define TCU_TFCR_FFLAG5 (1 << 5) -#define TCU_TFCR_FFLAG4 (1 << 4) -#define TCU_TFCR_FFLAG3 (1 << 3) -#define TCU_TFCR_FFLAG2 (1 << 2) -#define TCU_TFCR_FFLAG1 (1 << 1) -#define TCU_TFCR_FFLAG0 (1 << 0) - -#define TCU_TMR_HMASK5 (1 << 21) -#define TCU_TMR_HMASK4 (1 << 20) -#define TCU_TMR_HMASK3 (1 << 19) -#define TCU_TMR_HMASK2 (1 << 18) -#define TCU_TMR_HMASK1 (1 << 17) -#define TCU_TMR_HMASK0 (1 << 16) -#define TCU_TMR_FMASK5 (1 << 5) -#define TCU_TMR_FMASK4 (1 << 4) -#define TCU_TMR_FMASK3 (1 << 3) -#define TCU_TMR_FMASK2 (1 << 2) -#define TCU_TMR_FMASK1 (1 << 1) -#define TCU_TMR_FMASK0 (1 << 0) - -#define TCU_TMSR_HMST5 (1 << 21) -#define TCU_TMSR_HMST4 (1 << 20) -#define TCU_TMSR_HMST3 (1 << 19) -#define TCU_TMSR_HMST2 (1 << 18) -#define TCU_TMSR_HMST1 (1 << 17) -#define TCU_TMSR_HMST0 (1 << 16) -#define TCU_TMSR_FMST5 (1 << 5) -#define TCU_TMSR_FMST4 (1 << 4) -#define TCU_TMSR_FMST3 (1 << 3) -#define TCU_TMSR_FMST2 (1 << 2) -#define TCU_TMSR_FMST1 (1 << 1) -#define TCU_TMSR_FMST0 (1 << 0) - -#define TCU_TMCR_HMCL5 (1 << 21) -#define TCU_TMCR_HMCL4 (1 << 20) -#define TCU_TMCR_HMCL3 (1 << 19) -#define TCU_TMCR_HMCL2 (1 << 18) -#define TCU_TMCR_HMCL1 (1 << 17) -#define TCU_TMCR_HMCL0 (1 << 16) -#define TCU_TMCR_FMCL5 (1 << 5) -#define TCU_TMCR_FMCL4 (1 << 4) -#define TCU_TMCR_FMCL3 (1 << 3) -#define TCU_TMCR_FMCL2 (1 << 2) -#define TCU_TMCR_FMCL1 (1 << 1) -#define TCU_TMCR_FMCL0 (1 << 0) - -#define TCU_TSR_WDTS (1 << 16) -#define TCU_TSR_STOP5 (1 << 5) -#define TCU_TSR_STOP4 (1 << 4) -#define TCU_TSR_STOP3 (1 << 3) -#define TCU_TSR_STOP2 (1 << 2) -#define TCU_TSR_STOP1 (1 << 1) -#define TCU_TSR_STOP0 (1 << 0) - -#define TCU_TSSR_WDTSS (1 << 16) -#define TCU_TSSR_STPS5 (1 << 5) -#define TCU_TSSR_STPS4 (1 << 4) -#define TCU_TSSR_STPS3 (1 << 3) -#define TCU_TSSR_STPS2 (1 << 2) -#define TCU_TSSR_STPS1 (1 << 1) -#define TCU_TSSR_STPS0 (1 << 0) - -#define TCU_TSSR_WDTSC (1 << 16) -#define TCU_TSSR_STPC5 (1 << 5) -#define TCU_TSSR_STPC4 (1 << 4) -#define TCU_TSSR_STPC3 (1 << 3) -#define TCU_TSSR_STPC2 (1 << 2) -#define TCU_TSSR_STPC1 (1 << 1) -#define TCU_TSSR_STPC0 (1 << 0) - -/* Register definition */ -#define WDT_TCSR_PRESCALE_BIT 3 -#define WDT_TCSR_PRESCALE_MASK (0x7 << WDT_TCSR_PRESCALE_BIT) - #define WDT_TCSR_PRESCALE1 (0x0 << WDT_TCSR_PRESCALE_BIT) - #define WDT_TCSR_PRESCALE4 (0x1 << WDT_TCSR_PRESCALE_BIT) - #define WDT_TCSR_PRESCALE16 (0x2 << WDT_TCSR_PRESCALE_BIT) - #define WDT_TCSR_PRESCALE64 (0x3 << WDT_TCSR_PRESCALE_BIT) - #define WDT_TCSR_PRESCALE256 (0x4 << WDT_TCSR_PRESCALE_BIT) - #define WDT_TCSR_PRESCALE1024 (0x5 << WDT_TCSR_PRESCALE_BIT) -#define WDT_TCSR_EXT_EN (1 << 2) -#define WDT_TCSR_RTC_EN (1 << 1) -#define WDT_TCSR_PCK_EN (1 << 0) -#define WDT_TCER_TCEN (1 << 0) - -/* - * Define macros for UART_IER - * UART Interrupt Enable Register - */ -#define UART_IER_RIE (1 << 0) /* 0: receive fifo full interrupt disable */ -#define UART_IER_TIE (1 << 1) /* 0: transmit fifo empty interrupt disable */ -#define UART_IER_RLIE (1 << 2) /* 0: receive line status interrupt disable */ -#define UART_IER_MIE (1 << 3) /* 0: modem status interrupt disable */ -#define UART_IER_RTIE (1 << 4) /* 0: receive timeout interrupt disable */ - -/* - * Define macros for UART_ISR - * UART Interrupt Status Register - */ -#define UART_ISR_IP (1 << 0) /* 0: interrupt is pending 1: no interrupt */ -#define UART_ISR_IID (7 << 1) /* Source of Interrupt */ -#define UART_ISR_IID_MSI (0 << 1) /* Modem status interrupt */ -#define UART_ISR_IID_THRI (1 << 1) /* Transmitter holding register empty */ -#define UART_ISR_IID_RDI (2 << 1) /* Receiver data interrupt */ -#define UART_ISR_IID_RLSI (3 << 1) /* Receiver line status interrupt */ -/* FIFO mode select, set when UART_FCR.FE is set to 1 */ -#define UART_ISR_FFMS (3 << 6) -#define UART_ISR_FFMS_NO_FIFO (0 << 6) -#define UART_ISR_FFMS_FIFO_MODE (3 << 6) - -/* - * Define macros for UART_FCR - * UART FIFO Control Register - */ -#define UART_FCR_FE (1 << 0) /* 0: non-FIFO mode 1: FIFO mode */ -#define UART_FCR_RFLS (1 << 1) /* write 1 to flush receive FIFO */ -#define UART_FCR_TFLS (1 << 2) /* write 1 to flush transmit FIFO */ -#define UART_FCR_DMS (1 << 3) /* 0: disable DMA mode */ -#define UART_FCR_UUE (1 << 4) /* 0: disable UART */ -#define UART_FCR_RTRG (3 << 6) /* Receive FIFO Data Trigger */ -#define UART_FCR_RTRG_1 (0 << 6) -#define UART_FCR_RTRG_4 (1 << 6) -#define UART_FCR_RTRG_8 (2 << 6) -#define UART_FCR_RTRG_15 (3 << 6) - -/* - * Define macros for UART_LCR - * UART Line Control Register - */ -#define UART_LCR_WLEN (3 << 0) /* word length */ -#define UART_LCR_WLEN_5 (0 << 0) -#define UART_LCR_WLEN_6 (1 << 0) -#define UART_LCR_WLEN_7 (2 << 0) -#define UART_LCR_WLEN_8 (3 << 0) -#define UART_LCR_STOP (1 << 2) - /* 0: 1 stop bit when word length is 5,6,7,8 - 1: 1.5 stop bits when 5; 2 stop bits when 6,7,8 */ -#define UART_LCR_STOP_1 (0 << 2) - /* 0: 1 stop bit when word length is 5,6,7,8 - 1: 1.5 stop bits when 5; 2 stop bits when 6,7,8 */ -#define UART_LCR_STOP_2 (1 << 2) - /* 0: 1 stop bit when word length is 5,6,7,8 - 1: 1.5 stop bits when 5; 2 stop bits when 6,7,8 */ - -#define UART_LCR_PE (1 << 3) /* 0: parity disable */ -#define UART_LCR_PROE (1 << 4) /* 0: even parity 1: odd parity */ -#define UART_LCR_SPAR (1 << 5) /* 0: sticky parity disable */ -#define UART_LCR_SBRK (1 << 6) /* write 0 normal, write 1 send break */ -/* 0: access UART_RDR/TDR/IER 1: access UART_DLLR/DLHR */ -#define UART_LCR_DLAB (1 << 7) - -/* - * Define macros for UART_LSR - * UART Line Status Register - */ -/* 0: receive FIFO is empty 1: receive data is ready */ -#define UART_LSR_DR (1 << 0) -/* 0: no overrun error */ -#define UART_LSR_ORER (1 << 1) -/* 0: no parity error */ -#define UART_LSR_PER (1 << 2) -/* 0; no framing error */ -#define UART_LSR_FER (1 << 3) -/* 0: no break detected 1: receive a break signal */ -#define UART_LSR_BRK (1 << 4) -/* 1: transmit FIFO half "empty" */ -#define UART_LSR_TDRQ (1 << 5) -/* 1: transmit FIFO and shift registers empty */ -#define UART_LSR_TEMT (1 << 6) -/* 0: no receive error 1: receive error in FIFO mode */ -#define UART_LSR_RFER (1 << 7) - -/* - * Define macros for UART_MCR - * UART Modem Control Register - */ -#define UART_MCR_DTR (1 << 0) /* 0: DTR_ ouput high */ -#define UART_MCR_RTS (1 << 1) /* 0: RTS_ output high */ -/* 0: UART_MSR.RI is set to 0 and RI_ input high */ -#define UART_MCR_OUT1 (1 << 2) -/* 0: UART_MSR.DCD is set to 0 and DCD_ input high */ -#define UART_MCR_OUT2 (1 << 3) -#define UART_MCR_LOOP (1 << 4) /* 0: normal 1: loopback mode */ -#define UART_MCR_MCE (1 << 7) /* 0: modem function is disable */ - -/* - * Define macros for UART_MSR - * UART Modem Status Register - */ -#define UART_MSR_DCTS (1 << 0) /* 0: no change on CTS_ since last read */ -#define UART_MSR_DDSR (1 << 1) /* 0: no change on DSR_ since last read */ -#define UART_MSR_DRI (1 << 2) /* 0: no change on RI_ since last read */ -#define UART_MSR_DDCD (1 << 3) /* 0: no change on DCD_ since last read */ -#define UART_MSR_CTS (1 << 4) /* 0: CTS_ pin is high */ -#define UART_MSR_DSR (1 << 5) /* 0: DSR_ pin is high */ -#define UART_MSR_RI (1 << 6) /* 0: RI_ pin is high */ -#define UART_MSR_DCD (1 << 7) /* 0: DCD_ pin is high */ - -/* - * Define macros for SIRCR - * Slow IrDA Control Register - */ -#define SIRCR_TSIRE (1 << 0) /* 0: TX is in UART mode 1: IrDA mode */ -#define SIRCR_RSIRE (1 << 1) /* 0: RX is in UART mode 1: IrDA mode */ -#define SIRCR_TPWS (1 << 2) /* 0: transmit 0 pulse width is 3/16 of bit length - 1: 0 pulse width is 1.6us for 115.2Kbps */ -#define SIRCR_TXPL (1 << 3) /* 0: encoder generates a positive pulse for 0 */ -#define SIRCR_RXPL (1 << 4) /* 0: decoder interprets positive pulse as 0 */ - -/* MSC Clock and Control Register (MSC_STRPCL) */ -#define MSC_STRPCL_EXIT_MULTIPLE (1 << 7) -#define MSC_STRPCL_EXIT_TRANSFER (1 << 6) -#define MSC_STRPCL_START_READWAIT (1 << 5) -#define MSC_STRPCL_STOP_READWAIT (1 << 4) -#define MSC_STRPCL_RESET (1 << 3) -#define MSC_STRPCL_START_OP (1 << 2) -#define MSC_STRPCL_CLOCK_CONTROL_BIT 0 -#define MSC_STRPCL_CLOCK_CONTROL_MASK (0x3 << MSC_STRPCL_CLOCK_CONTROL_BIT) -#define MSC_STRPCL_CLOCK_CONTROL_STOP (0x1 << MSC_STRPCL_CLOCK_CONTROL_BIT) -#define MSC_STRPCL_CLOCK_CONTROL_START (0x2 << MSC_STRPCL_CLOCK_CONTROL_BIT) - -/* MSC Status Register (MSC_STAT) */ -#define MSC_STAT_IS_RESETTING (1 << 15) -#define MSC_STAT_SDIO_INT_ACTIVE (1 << 14) -#define MSC_STAT_PRG_DONE (1 << 13) -#define MSC_STAT_DATA_TRAN_DONE (1 << 12) -#define MSC_STAT_END_CMD_RES (1 << 11) -#define MSC_STAT_DATA_FIFO_AFULL (1 << 10) -#define MSC_STAT_IS_READWAIT (1 << 9) -#define MSC_STAT_CLK_EN (1 << 8) -#define MSC_STAT_DATA_FIFO_FULL (1 << 7) -#define MSC_STAT_DATA_FIFO_EMPTY (1 << 6) -#define MSC_STAT_CRC_RES_ERR (1 << 5) -#define MSC_STAT_CRC_READ_ERROR (1 << 4) -#define MSC_STAT_CRC_WRITE_ERROR_BIT 2 -#define MSC_STAT_CRC_WRITE_ERROR_MASK (0x3 << MSC_STAT_CRC_WRITE_ERROR_BIT) -/* No error on transmission of data */ - #define MSC_STAT_CRC_WRITE_ERROR_NO (0 << MSC_STAT_CRC_WRITE_ERROR_BIT) -/* Card observed erroneous transmission of data */ - #define MSC_STAT_CRC_WRITE_ERROR (1 << MSC_STAT_CRC_WRITE_ERROR_BIT) -/* No CRC status is sent back */ - #define MSC_STAT_CRC_WRITE_ERROR_NOSTS (2 << MSC_STAT_CRC_WRITE_ERROR_BIT) -#define MSC_STAT_TIME_OUT_RES (1 << 1) -#define MSC_STAT_TIME_OUT_READ (1 << 0) - -/* MSC Bus Clock Control Register (MSC_CLKRT) */ -#define MSC_CLKRT_CLK_RATE_BIT 0 -#define MSC_CLKRT_CLK_RATE_MASK (0x7 << MSC_CLKRT_CLK_RATE_BIT) - #define MSC_CLKRT_CLK_RATE_DIV_1 (0x0 << MSC_CLKRT_CLK_RATE_BIT) - #define MSC_CLKRT_CLK_RATE_DIV_2 (0x1 << MSC_CLKRT_CLK_RATE_BIT) - #define MSC_CLKRT_CLK_RATE_DIV_4 (0x2 << MSC_CLKRT_CLK_RATE_BIT) - #define MSC_CLKRT_CLK_RATE_DIV_8 (0x3 << MSC_CLKRT_CLK_RATE_BIT) - #define MSC_CLKRT_CLK_RATE_DIV_16 (0x4 << MSC_CLKRT_CLK_RATE_BIT) - #define MSC_CLKRT_CLK_RATE_DIV_32 (0x5 << MSC_CLKRT_CLK_RATE_BIT) - #define MSC_CLKRT_CLK_RATE_DIV_64 (0x6 << MSC_CLKRT_CLK_RATE_BIT) - #define MSC_CLKRT_CLK_RATE_DIV_128 (0x7 << MSC_CLKRT_CLK_RATE_BIT) - -/* MSC Command Sequence Control Register (MSC_CMDAT) */ -#define MSC_CMDAT_IO_ABORT (1 << 11) -#define MSC_CMDAT_BUS_WIDTH_BIT 9 -#define MSC_CMDAT_BUS_WIDTH_MASK (0x3 << MSC_CMDAT_BUS_WIDTH_BIT) -#define MSC_CMDAT_BUS_WIDTH_1BIT (0x0 << MSC_CMDAT_BUS_WIDTH_BIT) -#define MSC_CMDAT_BUS_WIDTH_4BIT (0x2 << MSC_CMDAT_BUS_WIDTH_BIT) -#define MSC_CMDAT_DMA_EN (1 << 8) -#define MSC_CMDAT_INIT (1 << 7) -#define MSC_CMDAT_BUSY (1 << 6) -#define MSC_CMDAT_STREAM_BLOCK (1 << 5) -#define MSC_CMDAT_WRITE (1 << 4) -#define MSC_CMDAT_READ (0 << 4) -#define MSC_CMDAT_DATA_EN (1 << 3) -#define MSC_CMDAT_RESPONSE_BIT 0 -#define MSC_CMDAT_RESPONSE_MASK (0x7 << MSC_CMDAT_RESPONSE_BIT) -#define MSC_CMDAT_RESPONSE_NONE (0x0 << MSC_CMDAT_RESPONSE_BIT) -#define MSC_CMDAT_RESPONSE_R1 (0x1 << MSC_CMDAT_RESPONSE_BIT) -#define MSC_CMDAT_RESPONSE_R2 (0x2 << MSC_CMDAT_RESPONSE_BIT) -#define MSC_CMDAT_RESPONSE_R3 (0x3 << MSC_CMDAT_RESPONSE_BIT) -#define MSC_CMDAT_RESPONSE_R4 (0x4 << MSC_CMDAT_RESPONSE_BIT) -#define MSC_CMDAT_RESPONSE_R5 (0x5 << MSC_CMDAT_RESPONSE_BIT) -#define MSC_CMDAT_RESPONSE_R6 (0x6 << MSC_CMDAT_RESPONSE_BIT) - -/* MSC Interrupts Mask Register (MSC_IMASK) */ -#define MSC_IMASK_SDIO (1 << 7) -#define MSC_IMASK_TXFIFO_WR_REQ (1 << 6) -#define MSC_IMASK_RXFIFO_RD_REQ (1 << 5) -#define MSC_IMASK_END_CMD_RES (1 << 2) -#define MSC_IMASK_PRG_DONE (1 << 1) -#define MSC_IMASK_DATA_TRAN_DONE (1 << 0) - -#ifndef __ASSEMBLY__ -/* INTC (Interrupt Controller) */ -struct jz4740_intc { - uint32_t isr; /* interrupt source register */ - uint32_t imr; /* interrupt mask register */ - uint32_t imsr; /* interrupt mask set register */ - uint32_t imcr; /* interrupt mask clear register */ - uint32_t ipr; /* interrupt pending register */ -}; - -/* RTC */ -struct jz4740_rtc { - uint32_t rcr; /* rtc control register */ - uint32_t rsr; /* rtc second register */ - uint32_t rsar; /* rtc second alarm register */ - uint32_t rgr; /* rtc regulator register */ - uint32_t hcr; /* hibernate control register */ - uint32_t hwfcr; /* hibernate wakeup filter counter reg */ - uint32_t hrcr; /* hibernate reset counter reg */ - uint32_t hwcr; /* hibernate wakeup control register */ - uint32_t hwrsr; /* hibernate wakeup status reg */ - uint32_t hspr; /* scratch pattern register */ -}; - -/* CPM (Clock reset and Power control Management) */ -struct jz4740_cpm { - uint32_t cpccr; /* 0x00 clock control reg */ - uint32_t lcr; /* 0x04 low power control reg */ - uint32_t rsr; /* 0x08 reset status reg */ - uint32_t pad00; - uint32_t cppcr; /* 0x10 pll control reg */ - uint32_t pad01[3]; - uint32_t clkgr; /* 0x20 clock gate reg */ - uint32_t scr; /* 0x24 sleep control reg */ - uint32_t pad02[14]; - uint32_t i2scd; /* 0x60 I2S device clock divider reg */ - uint32_t lpcdr; /* 0x64 LCD pix clock divider reg */ - uint32_t msccdr; /* 0x68 MSC device clock divider reg */ - uint32_t uhccdr; /* 0x6C UHC 48M clock divider reg */ - uint32_t uhcts; /* 0x70 UHC PHY test point reg */ - uint32_t ssicd; /* 0x74 SSI clock divider reg */ -}; - -/* TCU (Timer Counter Unit) */ -struct jz4740_tcu { - uint32_t pad00[4]; - uint32_t ter; /* 0x10 Timer Counter Enable Register */ - uint32_t tesr; /* 0x14 Timer Counter Enable Set Register */ - uint32_t tecr; /* 0x18 Timer Counter Enable Clear Register */ - uint32_t tsr; /* 0x1C Timer Stop Register */ - uint32_t tfr; /* 0x20 Timer Flag Register */ - uint32_t tfsr; /* 0x24 Timer Flag Set Register */ - uint32_t tfcr; /* 0x28 Timer Flag Clear Register */ - uint32_t tssr; /* 0x2C Timer Stop Set Register */ - uint32_t tmr; /* 0x30 Timer Mask Register */ - uint32_t tmsr; /* 0x34 Timer Mask Set Register */ - uint32_t tmcr; /* 0x38 Timer Mask Clear Register */ - uint32_t tscr; /* 0x3C Timer Stop Clear Register */ - uint32_t tdfr0; /* 0x40 Timer Data Full Register */ - uint32_t tdhr0; /* 0x44 Timer Data Half Register */ - uint32_t tcnt0; /* 0x48 Timer Counter Register */ - uint32_t tcsr0; /* 0x4C Timer Control Register */ - uint32_t tdfr1; /* 0x50 */ - uint32_t tdhr1; /* 0x54 */ - uint32_t tcnt1; /* 0x58 */ - uint32_t tcsr1; /* 0x5C */ - uint32_t tdfr2; /* 0x60 */ - uint32_t tdhr2; /* 0x64 */ - uint32_t tcnt2; /* 0x68 */ - uint32_t tcsr2; /* 0x6C */ - uint32_t tdfr3; /* 0x70 */ - uint32_t tdhr3; /* 0x74 */ - uint32_t tcnt3; /* 0x78 */ - uint32_t tcsr3; /* 0x7C */ - uint32_t tdfr4; /* 0x80 */ - uint32_t tdhr4; /* 0x84 */ - uint32_t tcnt4; /* 0x88 */ - uint32_t tcsr4; /* 0x8C */ - uint32_t tdfr5; /* 0x90 */ - uint32_t tdhr5; /* 0x94 */ - uint32_t tcnt5; /* 0x98 */ - uint32_t tcsr5; /* 0x9C */ -}; - -/* WDT (WatchDog Timer) */ -struct jz4740_wdt { - uint16_t tdr; /* 0x00 watchdog timer data reg*/ - uint16_t pad00; - uint8_t tcer; /* 0x04 watchdog counter enable reg*/ - uint8_t pad01[3]; - uint16_t tcnt; /* 0x08 watchdog timer counter*/ - uint16_t pad02; - uint16_t tcsr; /* 0x0C watchdog timer control reg*/ - uint16_t pad03; -}; - -struct jz4740_uart { - uint8_t rbr_thr_dllr; - /* 0x00 R 8b receive buffer reg */ - /* 0x00 W 8b transmit hold reg */ - /* 0x00 RW 8b divisor latch low reg */ - uint8_t pad00[3]; - uint8_t dlhr_ier; - /* 0x04 RW 8b divisor latch high reg */ - /* 0x04 RW 8b interrupt enable reg */ - uint8_t pad01[3]; - uint8_t iir_fcr; - /* 0x08 R 8b interrupt identification reg */ - /* 0x08 W 8b FIFO control reg */ - uint8_t pad02[3]; - uint8_t lcr; /* 0x0C RW 8b Line control reg */ - uint8_t pad03[3]; - uint8_t mcr; /* 0x10 RW 8b modem control reg */ - uint8_t pad04[3]; - uint8_t lsr; /* 0x14 R 8b line status reg */ - uint8_t pad05[3]; - uint8_t msr; /* 0x18 R 8b modem status reg */ - uint8_t pad06[3]; - uint8_t spr; /* 0x1C RW 8b scratch pad reg */ - uint8_t pad07[3]; - uint8_t isr; /* 0x20 RW 8b infrared selection reg */ - uint8_t pad08[3]; - uint8_t umr; /* 0x24 RW 8b */ -}; - -/* MSC */ -struct jz4740_msc { - uint16_t strpcl;/* 0x00 */ - uint32_t stat; /* 0x04 */ - uint16_t clkrt; /* 0x08 */ - uint32_t cmdat; /* 0x0C */ - uint16_t resto; /* 0x10 */ - uint16_t rdto; /* 0x14 */ - uint16_t blklen;/* 0x18 */ - uint16_t nob; /* 0x1C */ - uint16_t snob; /* 0x20 */ - uint16_t imask; /* 0x24 */ - uint16_t ireg; /* 0x28 */ - uint8_t cmd; /* 0x2C */ - uint32_t arg; /* 0x30 */ - uint16_t res; /* 0x34 */ - uint32_t rxfifo;/* 0x38 */ - uint32_t txfifo;/* 0x3C */ -}; - -/* External Memory Controller */ -struct jz4740_emc { - uint32_t bcr; /* 0x00 BCR */ - uint32_t pad00[3]; - uint32_t smcr[5]; - /* x10 Static Memory Control Register 0 */ - /* x14 Static Memory Control Register 1 */ - /* x18 Static Memory Control Register 2 */ - /* x1c Static Memory Control Register 3 */ - /* x20 Static Memory Control Register 4 */ - uint32_t pad01[3]; - uint32_t sacr[5]; - /* x30 Static Memory Bank 0 Addr Config Reg */ - /* x34 Static Memory Bank 1 Addr Config Reg */ - /* x38 Static Memory Bank 2 Addr Config Reg */ - /* x3c Static Memory Bank 3 Addr Config Reg */ - /* x40 Static Memory Bank 4 Addr Config Reg */ - uint32_t pad02[3]; - uint32_t nfcsr; /* x050 NAND Flash Control/Status Register */ - - uint32_t pad03[11]; - uint32_t dmcr; /* x80 DRAM Control Register */ - uint16_t rtcsr; /* x84 Refresh Time Control/Status Register */ - uint16_t pad04; - uint16_t rtcnt; /* x88 Refresh Timer Counter */ - uint16_t pad05; - uint16_t rtcor; /* x8c Refresh Time Constant Register */ - uint16_t pad06; - uint32_t dmar0; /* x90 SDRAM Bank 0 Addr Config Register */ - uint32_t pad07[27]; - uint32_t nfecr; /* x100 NAND Flash ECC Control Register */ - uint32_t nfecc; /* x104 NAND Flash ECC Data Register */ - uint8_t nfpar[12]; - /* x108 NAND Flash RS Parity 0 Register */ - /* x10c NAND Flash RS Parity 1 Register */ - /* x110 NAND Flash RS Parity 2 Register */ - uint32_t nfints; /* x114 NAND Flash Interrupt Status Register */ - uint32_t nfinte; /* x118 NAND Flash Interrupt Enable Register */ - uint32_t nferr[4]; - /* x11c NAND Flash RS Error Report 0 Register */ - /* x120 NAND Flash RS Error Report 1 Register */ - /* x124 NAND Flash RS Error Report 2 Register */ - /* x128 NAND Flash RS Error Report 3 Register */ -}; - -#define __gpio_as_nand() \ -do { \ - writel(0x02018000, GPIO_PXFUNS(1)); \ - writel(0x02018000, GPIO_PXSELC(1)); \ - writel(0x02018000, GPIO_PXPES(1)); \ - writel(0x30000000, GPIO_PXFUNS(2)); \ - writel(0x30000000, GPIO_PXSELC(2)); \ - writel(0x30000000, GPIO_PXPES(2)); \ - writel(0x40000000, GPIO_PXFUNC(2)); \ - writel(0x40000000, GPIO_PXSELC(2)); \ - writel(0x40000000, GPIO_PXDIRC(2)); \ - writel(0x40000000, GPIO_PXPES(2)); \ - writel(0x00400000, GPIO_PXFUNS(1)); \ - writel(0x00400000, GPIO_PXSELC(1)); \ -} while (0) - -#define __gpio_as_sdram_16bit_4720() \ -do { \ - writel(0x5442bfaa, GPIO_PXFUNS(0)); \ - writel(0x5442bfaa, GPIO_PXSELC(0)); \ - writel(0x5442bfaa, GPIO_PXPES(0)); \ - writel(0x81f9ffff, GPIO_PXFUNS(1)); \ - writel(0x81f9ffff, GPIO_PXSELC(1)); \ - writel(0x81f9ffff, GPIO_PXPES(1)); \ - writel(0x01000000, GPIO_PXFUNS(2)); \ - writel(0x01000000, GPIO_PXSELC(2)); \ - writel(0x01000000, GPIO_PXPES(2)); \ -} while (0) - -#define __gpio_as_lcd_18bit() \ -do { \ - writel(0x003fffff, GPIO_PXFUNS(2)); \ - writel(0x003fffff, GPIO_PXSELC(2)); \ - writel(0x003fffff, GPIO_PXPES(2)); \ -} while (0) - -/* MSC_CMD, MSC_CLK, MSC_D0 ~ MSC_D3 */ -#define __gpio_as_msc() \ -do { \ - writel(0x00003f00, GPIO_PXFUNS(3)); \ - writel(0x00003f00, GPIO_PXSELC(3)); \ - writel(0x00003f00, GPIO_PXPES(3)); \ -} while (0) - -#define __gpio_get_port(p) (readl(GPIO_PXPIN(p))) - -#define __gpio_disable_pull(n) \ -do { \ - unsigned int p, o; \ - p = (n) / 32; \ - o = (n) % 32; \ - writel((1 << o), GPIO_PXPES(p)); \ -} while (0) - -#define __gpio_enable_pull(n) \ -do { \ - unsigned int p, o; \ - p = (n) / 32; \ - o = (n) % 32; \ - writel(1 << (o), GPIO_PXPEC(p)); \ -} while (0) - -#define __gpio_port_as_output(p, o) \ -do { \ - writel(1 << (o), GPIO_PXFUNC(p)); \ - writel(1 << (o), GPIO_PXSELC(p)); \ - writel(1 << (o), GPIO_PXDIRS(p)); \ -} while (0) - -#define __gpio_port_as_input(p, o) \ -do { \ - writel(1 << (o), GPIO_PXFUNC(p)); \ - writel(1 << (o), GPIO_PXSELC(p)); \ - writel(1 << (o), GPIO_PXDIRC(p)); \ -} while (0) - -#define __gpio_as_output(n) \ -do { \ - unsigned int p, o; \ - p = (n) / 32; \ - o = (n) % 32; \ - __gpio_port_as_output(p, o); \ -} while (0) - -#define __gpio_as_input(n) \ -do { \ - unsigned int p, o; \ - p = (n) / 32; \ - o = (n) % 32; \ - __gpio_port_as_input(p, o); \ -} while (0) - -#define __gpio_set_pin(n) \ -do { \ - unsigned int p, o; \ - p = (n) / 32; \ - o = (n) % 32; \ - writel((1 << o), GPIO_PXDATS(p)); \ -} while (0) - -#define __gpio_clear_pin(n) \ -do { \ - unsigned int p, o; \ - p = (n) / 32; \ - o = (n) % 32; \ - writel((1 << o), GPIO_PXDATC(p)); \ -} while (0) - -#define __gpio_get_pin(n) \ -({ \ - unsigned int p, o, v; \ - p = (n) / 32; \ - o = (n) % 32; \ - if (__gpio_get_port(p) & (1 << o)) \ - v = 1; \ - else \ - v = 0; \ - v; \ -}) - -#define __gpio_as_uart0() \ -do { \ - writel(0x06000000, GPIO_PXFUNS(3)); \ - writel(0x06000000, GPIO_PXSELS(3)); \ - writel(0x06000000, GPIO_PXPES(3)); \ -} while (0) - -#define __gpio_jtag_to_uart0() \ -do { \ - writel(0x80000000, GPIO_PXSELS(2)); \ -} while (0) - -/* Clock Control Register */ -#define __cpm_get_pllm() \ - ((readl(JZ4740_CPM_BASE + 0x10) & CPM_CPPCR_PLLM_MASK) \ - >> CPM_CPPCR_PLLM_BIT) -#define __cpm_get_plln() \ - ((readl(JZ4740_CPM_BASE + 0x10) & CPM_CPPCR_PLLN_MASK) \ - >> CPM_CPPCR_PLLN_BIT) -#define __cpm_get_pllod() \ - ((readl(JZ4740_CPM_BASE + 0x10) & CPM_CPPCR_PLLOD_MASK) \ - >> CPM_CPPCR_PLLOD_BIT) -#define __cpm_get_hdiv() \ - ((readl(JZ4740_CPM_BASE + 0x00) & CPM_CPCCR_HDIV_MASK) \ - >> CPM_CPCCR_HDIV_BIT) -#define __cpm_get_pdiv() \ - ((readl(JZ4740_CPM_BASE + 0x00) & CPM_CPCCR_PDIV_MASK) \ - >> CPM_CPCCR_PDIV_BIT) -#define __cpm_get_cdiv() \ - ((readl(JZ4740_CPM_BASE + 0x00) & CPM_CPCCR_CDIV_MASK) \ - >> CPM_CPCCR_CDIV_BIT) -#define __cpm_get_mdiv() \ - ((readl(JZ4740_CPM_BASE + 0x00) & CPM_CPCCR_MDIV_MASK) \ - >> CPM_CPCCR_MDIV_BIT) - -static inline unsigned int __cpm_get_pllout(void) -{ - uint32_t m, n, no, pllout; - uint32_t od[4] = {1, 2, 2, 4}; - - struct jz4740_cpm *cpm = (struct jz4740_cpm *)JZ4740_CPM_BASE; - uint32_t cppcr = readl(&cpm->cppcr); - - if ((cppcr & CPM_CPPCR_PLLEN) && !(cppcr & CPM_CPPCR_PLLBP)) { - m = __cpm_get_pllm() + 2; - n = __cpm_get_plln() + 2; - no = od[__cpm_get_pllod()]; - pllout = (CONFIG_SYS_EXTAL / (n * no)) * m; - } else - pllout = CONFIG_SYS_EXTAL; - - return pllout; -} - -extern void pll_init(void); -extern void sdram_init(void); -extern void calc_clocks(void); -extern void rtc_init(void); - -#endif /* !__ASSEMBLY__ */ -#endif /* __JZ4740_H__ */