From: Marek Vasut Date: Sun, 12 Apr 2020 19:28:30 +0000 (+0200) Subject: net: rtl8139: Minor cleanup of read_eeprom() X-Git-Tag: v2020.07-rc2~18^2~23 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=17dc95e5277cdbad1281b6b5605b1eef74729463;p=oweals%2Fu-boot.git net: rtl8139: Minor cleanup of read_eeprom() Rename the function to rtl8139_read_eeprom() to keep the naming consistent, keep the variables sorted in reverse xmas tree. No functional change. Signed-off-by: Marek Vasut Cc: Joe Hershberger --- diff --git a/drivers/net/rtl8139.c b/drivers/net/rtl8139.c index ff014ade88..90e9f1272c 100644 --- a/drivers/net/rtl8139.c +++ b/drivers/net/rtl8139.c @@ -199,7 +199,7 @@ static unsigned char tx_buffer[TX_BUF_SIZE] __attribute__((aligned(4))); static unsigned char rx_ring[RX_BUF_LEN+16] __attribute__((aligned(4))); static int rtl8139_probe(struct eth_device *dev, bd_t *bis); -static int read_eeprom(int location, int addr_len); +static int rtl8139_read_eeprom(unsigned int location, unsigned int addr_len); static void rtl_reset(struct eth_device *dev); static int rtl_transmit(struct eth_device *dev, void *packet, int length); static int rtl_poll(struct eth_device *dev); @@ -273,9 +273,9 @@ static int rtl8139_probe(struct eth_device *dev, bd_t *bis) /* Bring the chip out of low-power mode. */ outb(0x00, ioaddr + RTL_REG_CONFIG1); - addr_len = read_eeprom(0,8) == 0x8129 ? 8 : 6; + addr_len = rtl8139_read_eeprom(0,8) == 0x8129 ? 8 : 6; for (i = 0; i < 3; i++) - *ap++ = le16_to_cpu (read_eeprom(i + 7, addr_len)); + *ap++ = le16_to_cpu (rtl8139_read_eeprom(i + 7, addr_len)); rtl_reset(dev); @@ -312,12 +312,13 @@ static void rtl8139_eeprom_delay(uintptr_t regbase) inl(regbase + RTL_REG_CFG9346); } -static int read_eeprom(int location, int addr_len) +static int rtl8139_read_eeprom(unsigned int location, unsigned int addr_len) { - int i; + unsigned int read_cmd = location | (EE_READ_CMD << addr_len); + uintptr_t ee_addr = ioaddr + RTL_REG_CFG9346; unsigned int retval = 0; - long ee_addr = ioaddr + RTL_REG_CFG9346; - int read_cmd = location | (EE_READ_CMD << addr_len); + u8 dataval; + int i; outb(EE_ENB & ~EE_CS, ee_addr); outb(EE_ENB, ee_addr); @@ -325,19 +326,21 @@ static int read_eeprom(int location, int addr_len) /* Shift the read command bits out. */ for (i = 4 + addr_len; i >= 0; i--) { - int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0; + dataval = (read_cmd & BIT(i)) ? EE_DATA_WRITE : 0; outb(EE_ENB | dataval, ee_addr); rtl8139_eeprom_delay(ioaddr); outb(EE_ENB | dataval | EE_SHIFT_CLK, ee_addr); rtl8139_eeprom_delay(ioaddr); } + outb(EE_ENB, ee_addr); rtl8139_eeprom_delay(ioaddr); for (i = 16; i > 0; i--) { outb(EE_ENB | EE_SHIFT_CLK, ee_addr); rtl8139_eeprom_delay(ioaddr); - retval = (retval << 1) | ((inb(ee_addr) & EE_DATA_READ) ? 1 : 0); + retval <<= 1; + retval |= inb(ee_addr) & EE_DATA_READ; outb(EE_ENB, ee_addr); rtl8139_eeprom_delay(ioaddr); } @@ -345,6 +348,7 @@ static int read_eeprom(int location, int addr_len) /* Terminate the EEPROM access. */ outb(~EE_CS, ee_addr); rtl8139_eeprom_delay(ioaddr); + return retval; }