From: Stefan Roese Date: Wed, 21 Mar 2007 12:39:57 +0000 (+0100) Subject: [PATCH] Add AMCC Acadia (405EZ) eval board support X-Git-Tag: v1.3.0-rc1~88^2~27^2 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=16c0cc1c82081a493ab87c51980b28336ce1bce8;p=oweals%2Fu-boot.git [PATCH] Add AMCC Acadia (405EZ) eval board support This patch adds support for the new AMCC Acadia eval board. Please note that this Acadia/405EZ support is still in a beta stage. Still lot's of cleanup needed but we need a preliminary release now. Signed-off-by: Stefan Roese --- diff --git a/MAINTAINERS b/MAINTAINERS index 1d0a8dfdb3..61d9271f73 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -284,6 +284,7 @@ Stefan Roese TQM85xx MPC8540/8541/8555/8560 + acadia PPC405EZ alpr PPC440GX bamboo PPC440EP bunbinga PPC405EP diff --git a/MAKEALL b/MAKEALL index 8431b3ea53..1c8e5ba159 100755 --- a/MAKEALL +++ b/MAKEALL @@ -75,22 +75,22 @@ LIST_8xx=" \ ######################################################################### LIST_4xx=" \ - ADCIOP alpr AP1000 AR405 \ - ASH405 bamboo bubinga CANBT \ - CMS700 CPCI2DP CPCI405 CPCI4052 \ - CPCI405AB CPCI405DT CPCI440 CPCIISER4 \ - CRAYL1 csb272 csb472 DASA_SIM \ - DP405 DU405 ebony ERIC \ - EXBITGEN G2000 HH405 HUB405 \ - JSE KAREF katmai luan \ - METROBOX MIP405 MIP405T ML2 \ - ml300 ocotea OCRTC ORSG \ - p3p440 PCI405 pcs440ep PIP405 \ - PLU405 PMC405 PPChameleonEVB sbc405 \ - sc3 sequoia sequoia_nand taishan \ - VOH405 VOM405 W7OLMC W7OLMG \ - walnut WUH405 XPEDITE1K yellowstone \ - yosemite yucca \ + acadia ADCIOP alpr AP1000 \ + AR405 ASH405 bamboo bubinga \ + CANBT CMS700 CPCI2DP CPCI405 \ + CPCI4052 CPCI405AB CPCI405DT CPCI440 \ + CPCIISER4 CRAYL1 csb272 csb472 \ + DASA_SIM DP405 DU405 ebony \ + ERIC EXBITGEN G2000 HH405 \ + HUB405 JSE KAREF katmai \ + luan METROBOX MIP405 MIP405T \ + ML2 ml300 ocotea OCRTC \ + ORSG p3p440 PCI405 pcs440ep \ + PIP405 PLU405 PMC405 PPChameleonEVB \ + sbc405 sc3 sequoia sequoia_nand \ + taishan VOH405 VOM405 W7OLMC \ + W7OLMG walnut WUH405 XPEDITE1K \ + yellowstone yosemite yucca \ " ######################################################################### diff --git a/Makefile b/Makefile index 358d1817c9..65e7f5b1d0 100644 --- a/Makefile +++ b/Makefile @@ -994,6 +994,9 @@ wtk_config: unconfig ######################################################################### xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1)))))) +acadia_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amcc + ADCIOP_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd diff --git a/board/amcc/acadia/Makefile b/board/amcc/acadia/Makefile new file mode 100644 index 0000000000..183f694c7b --- /dev/null +++ b/board/amcc/acadia/Makefile @@ -0,0 +1,47 @@ +# +# (C) Copyright 2007 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS = $(BOARD).o cpr.o memory.o +SOBJS = + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/board/amcc/acadia/acadia.c b/board/amcc/acadia/acadia.c new file mode 100644 index 0000000000..c8aaad2d78 --- /dev/null +++ b/board/amcc/acadia/acadia.c @@ -0,0 +1,152 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +extern void board_pll_init_f(void); + +/* Some specific Acadia Defines */ +#define CPLD_BASE 0x80000000 + +void liveoak_gpio_init(void) +{ + /* + * GPIO0 setup (select GPIO or alternate function) + */ + out32(GPIO0_OSRL, CFG_GPIO0_OSRL); + out32(GPIO0_OSRH, CFG_GPIO0_OSRH); /* output select */ + out32(GPIO0_ISR1L, CFG_GPIO0_ISR1L); + out32(GPIO0_ISR1H, CFG_GPIO0_ISR1H); /* input select */ + out32(GPIO0_TSRL, CFG_GPIO0_TSRL); + out32(GPIO0_TSRH, CFG_GPIO0_TSRH); /* three-state select */ + out32(GPIO0_TCR, CFG_GPIO0_TCR); /* enable output driver for outputs */ + + /* + * Ultra (405EZ) was nice enough to add another GPIO controller + */ + out32(GPIO1_OSRH, CFG_GPIO1_OSRH); /* output select */ + out32(GPIO1_OSRL, CFG_GPIO1_OSRL); + out32(GPIO1_ISR1H, CFG_GPIO1_ISR1H); /* input select */ + out32(GPIO1_ISR1L, CFG_GPIO1_ISR1L); + out32(GPIO1_TSRH, CFG_GPIO1_TSRH); /* three-state select */ + out32(GPIO1_TSRL, CFG_GPIO1_TSRL); + out32(GPIO1_TCR, CFG_GPIO1_TCR); /* enable output driver for outputs */ +} + +#if 0 /* test-only: not called at all??? */ +void ext_bus_cntlr_init(void) +{ +#if (defined(EBC_PB4AP) && defined(EBC_PB4CR) && !(CFG_INIT_DCACHE_CS == 4)) + mtebc(pb4ap, EBC_PB4AP); + mtebc(pb4cr, EBC_PB4CR); +#endif +} +#endif + +int board_early_init_f(void) +{ + unsigned int reg; + +#if 0 /* test-only */ + /* + * If CRAM memory and SPI/NAND boot, and if the CRAM memory is + * already initialized by the pre-loader then we can't reinitialize + * CPR registers, GPIO registers and EBC registers as this will + * have the effect of un-initializing CRAM. + */ + spr_reg = (volatile unsigned long) mfspr(SPRG7); + if (spr_reg != LOAK_CRAM) { /* != CRAM */ + board_pll_init_f(); + liveoak_gpio_init(); + ext_bus_cntlr_init(); + + mtebc(pb1ap, CFG_EBC_PB1AP); + mtebc(pb1cr, CFG_EBC_PB1CR); + + mtebc(pb2ap, CFG_EBC_PB2AP); + mtebc(pb2cr, CFG_EBC_PB2CR); + } +#else + board_pll_init_f(); + liveoak_gpio_init(); +/* ext_bus_cntlr_init(); */ +#endif + +#if 0 /* test-only (orig) */ + /* + * If we boot from NAND Flash, we are running in + * RAM, so disable the EBC_CS0 so that it goes back + * to the NOR Flash. It will be enabled later + * for the NAND Flash on EBC_CS1 + */ + mfsdr(sdrultra0, reg); + mtsdr(sdrultra0, reg & ~SDR_ULTRA0_CSNSEL0); +#endif +#if 0 /* test-only */ + /* configure for NAND */ + mfsdr(sdrultra0, reg); + reg &= ~SDR_ULTRA0_CSN_MASK; + reg |= SDR_ULTRA0_CSNSEL0 >> CFG_NAND_CS; + mtsdr(sdrultra0, reg & ~SDR_ULTRA0_CSNSEL0); +#endif + + /* USB Host core needs this bit set */ + mfsdr(sdrultra1, reg); + mtsdr(sdrultra1, reg | SDR_ULTRA1_LEDNENABLE); + + mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(uicer, 0x00000000); /* disable all ints */ + mtdcr(uiccr, 0x00000010); + mtdcr(uicpr, 0xFE7FFFF0); /* set int polarities */ + mtdcr(uictr, 0x00000010); /* set int trigger levels */ + mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + + return 0; +} + +int misc_init_f(void) +{ + /* Set EPLD to take PHY out of reset */ + out8(CPLD_BASE + 0x05, 0x00); + udelay(100000); + + return 0; +} + +/* + * Check Board Identity: + */ +int checkboard(void) +{ + char *s = getenv("serial#"); + + printf("Board: Acadia - AMCC PPC405EZ Evaluation Board"); + if (s != NULL) { + puts(", serial# "); + puts(s); + } + putc('\n'); + + return (0); +} diff --git a/board/amcc/acadia/config.mk b/board/amcc/acadia/config.mk new file mode 100644 index 0000000000..79b948e46b --- /dev/null +++ b/board/amcc/acadia/config.mk @@ -0,0 +1,41 @@ +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +sinclude $(TOPDIR)/board/amcc/liveoak/config.tmp + +ifndef TEXT_BASE +TEXT_BASE = 0xFFFC0000 +endif + +ifeq ($(CONFIG_NAND_U_BOOT),y) +LDSCRIPT = $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds +endif + +ifeq ($(CONFIG_SPI_U_BOOT),y) +LDSCRIPT = $(TOPDIR)/board/$(BOARDDIR)/u-boot-spi.lds +PAD_TO = 0x00840000 +endif + +ifeq ($(debug),1) +PLATFORM_CPPFLAGS += -DDEBUG +endif diff --git a/board/amcc/acadia/cpr.c b/board/amcc/acadia/cpr.c new file mode 100644 index 0000000000..10d8290e62 --- /dev/null +++ b/board/amcc/acadia/cpr.c @@ -0,0 +1,195 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +/* test-only: move into cpu directory!!! */ + +#if defined(PLLMR0_200_133_66) +void board_pll_init_f(void) +{ + /* + * set PLL clocks based on input sysclk is 33M + * + * ---------------------------------- + * | CLK | FREQ (MHz) | DIV RATIO | + * ---------------------------------- + * | CPU | 200.0 | 4 (0x02)| + * | PLB | 133.3 | 6 (0x06)| + * | OPB | 66.6 | 12 (0x0C)| + * | EBC | 66.6 | 12 (0x0C)| + * | SPI | 66.6 | 12 (0x0C)| + * | UART0 | 10.0 | 40 (0x28)| + * | UART1 | 10.0 | 40 (0x28)| + * | DAC | 2.0 | 200 (0xC8)| + * | ADC | 2.0 | 200 (0xC8)| + * | PWM | 100.0 | 4 (0x04)| + * | EMAC | 25.0 | 16 (0x10)| + * ----------------------------------- + */ + + /* Initialize PLL */ + mtcpr(cprpllc, 0x0000033c); + mtcpr(cprplld, 0x0c010200); + mtcpr(cprprimad, 0x04060c0c); + mtcpr(cprperd0, 0x000c0000); /* SPI clk div. eq. OPB clk div. */ + mtcpr(cprclkupd, 0x40000000); +} + +#elif defined(PLLMR0_266_160_80) + +void board_pll_init_f(void) +{ + /* + * set PLL clocks based on input sysclk is 33M + * + * ---------------------------------- + * | CLK | FREQ (MHz) | DIV RATIO | + * ---------------------------------- + * | CPU | 266.64 | 3 | + * | PLB | 159.98 | 5 (0x05)| + * | OPB | 79.99 | 10 (0x0A)| + * | EBC | 79.99 | 10 (0x0A)| + * | SPI | 79.99 | 10 (0x0A)| + * | UART0 | 28.57 | 7 (0x07)| + * | UART1 | 28.57 | 7 (0x07)| + * | DAC | 28.57 | 7 (0xA7)| + * | ADC | 4 | 50 (0x32)| + * | PWM | 28.57 | 7 (0x07)| + * | EMAC | 4 | 50 (0x32)| + * ----------------------------------- + */ + + /* Initialize PLL */ + mtcpr(cprpllc, 0x20000238); + mtcpr(cprplld, 0x03010400); + mtcpr(cprprimad, 0x03050a0a); + mtcpr(cprperc0, 0x00000000); + mtcpr(cprperd0, 0x070a0707); /* SPI clk div. eq. OPB clk div. */ + mtcpr(cprperd1, 0x07323200); + mtcpr(cprclkupd, 0x40000000); +} + +#elif defined(PLLMR0_333_166_83) + +void board_pll_init_f(void) +{ + /* + * set PLL clocks based on input sysclk is 33M + * + * ---------------------------------- + * | CLK | FREQ (MHz) | DIV RATIO | + * ---------------------------------- + * | CPU | 333.33 | 2 | + * | PLB | 166.66 | 4 (0x04)| + * | OPB | 83.33 | 8 (0x08)| + * | EBC | 83.33 | 8 (0x08)| + * | SPI | 83.33 | 8 (0x08)| + * | UART0 | 16.66 | 5 (0x05)| + * | UART1 | 16.66 | 5 (0x05)| + * | DAC | ???? | 166 (0xA6)| + * | ADC | ???? | 166 (0xA6)| + * | PWM | 41.66 | 3 (0x03)| + * | EMAC | ???? | 3 (0x03)| + * ----------------------------------- + */ + + /* Initialize PLL */ + mtcpr(cprpllc, 0x0000033C); + mtcpr(cprplld, 0x0a010000); + mtcpr(cprprimad, 0x02040808); + mtcpr(cprperd0, 0x02080505); /* SPI clk div. eq. OPB clk div. */ + mtcpr(cprperd1, 0xA6A60300); + mtcpr(cprclkupd, 0x40000000); +} + +#elif defined(PLLMR0_100_100_12) + +void board_pll_init_f(void) +{ + /* + * set PLL clocks based on input sysclk is 33M + * + * ---------------------- + * | CLK | FREQ (MHz) | + * ---------------------- + * | CPU | 100.00 | + * | PLB | 100.00 | + * | OPB | 12.00 | + * | EBC | 49.00 | + * ---------------------- + */ + + /* Initialize PLL */ + mtcpr(cprpllc, 0x000003BC); + mtcpr(cprplld, 0x06060600); + mtcpr(cprprimad, 0x02020004); + mtcpr(cprperd0, 0x04002828); /* SPI clk div. eq. OPB clk div. */ + mtcpr(cprperd1, 0xC8C81600); + mtcpr(cprclkupd, 0x40000000); +} +#endif /* CPU__405EZ */ + +#if defined(CONFIG_NAND_SPL) || defined(CONFIG_SPI_SPL) +/* + * Get timebase clock frequency + */ +unsigned long get_tbclk (void) +{ + unsigned long cpr_plld; + unsigned long cpr_primad; + unsigned long primad_cpudv; + unsigned long pllFbkDiv; + unsigned long freqProcessor; + + /* + * Read PLL Mode registers + */ + mfcpr(cprplld, cpr_plld); + + /* + * Read CPR_PRIMAD register + */ + mfcpr(cprprimad, cpr_primad); + + /* + * Determine CPU clock frequency + */ + primad_cpudv = ((cpr_primad & PRIMAD_CPUDV_MASK) >> 24); + if (primad_cpudv == 0) + primad_cpudv = 16; + + /* + * Determine FBK_DIV. + */ + pllFbkDiv = ((cpr_plld & PLLD_FBDV_MASK) >> 24); + if (pllFbkDiv == 0) + pllFbkDiv = 256; + + freqProcessor = (CONFIG_SYS_CLK_FREQ * pllFbkDiv) / primad_cpudv; + + return (freqProcessor); +} +#endif /* defined(CONFIG_NAND_SPL) || defined(CONFIG_SPI_SPL) */ diff --git a/board/amcc/acadia/flash.c b/board/amcc/acadia/flash.c new file mode 100644 index 0000000000..39a11f9387 --- /dev/null +++ b/board/amcc/acadia/flash.c @@ -0,0 +1,1108 @@ +/* + * (C) Copyright 2004-2005 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2002 Jun Gu + * Add support for Am29F016D and dynamic switch setting. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Modified 4/5/2001 + * Wait for completion of each sector erase command issued + * 4/5/2001 + * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com + */ + +#include +#include +#include + +#ifdef DEBUG +#define DEBUGF(x...) printf(x) +#else +#define DEBUGF(x...) +#endif /* DEBUG */ + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ + +/* + * Mark big flash bank (16 bit instead of 8 bit access) in address with bit 0 + */ +static unsigned long flash_addr_table[][CFG_MAX_FLASH_BANKS] = { + {0xffc00001}, /* 0:boot from big flash */ +}; + +/* + * include common flash code (for amcc boards) + */ +/*----------------------------------------------------------------------- + * Functions + */ +static int write_word(flash_info_t * info, ulong dest, ulong data); +#ifdef CFG_FLASH_2ND_16BIT_DEV +static int write_word_1(flash_info_t * info, ulong dest, ulong data); +static int write_word_2(flash_info_t * info, ulong dest, ulong data); +static int flash_erase_1(flash_info_t * info, int s_first, int s_last); +static int flash_erase_2(flash_info_t * info, int s_first, int s_last); +static ulong flash_get_size_1(vu_long * addr, flash_info_t * info); +static ulong flash_get_size_2(vu_long * addr, flash_info_t * info); +#endif + +void flash_print_info(flash_info_t * info) +{ + int i; + int k; + int size; + int erased; + volatile unsigned long *flash; + + if (info->flash_id == FLASH_UNKNOWN) { + printf("missing or unknown FLASH type\n"); + return; + } + + switch (info->flash_id & FLASH_VENDMASK) { + case FLASH_MAN_AMD: + printf("AMD "); + break; + case FLASH_MAN_STM: + printf("STM "); + break; + case FLASH_MAN_FUJ: + printf("FUJITSU "); + break; + case FLASH_MAN_SST: + printf("SST "); + break; + case FLASH_MAN_MX: + printf("MIXC "); + break; + default: + printf("Unknown Vendor "); + break; + } + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_AM040: + printf("AM29F040 (512 Kbit, uniform sector size)\n"); + break; + case FLASH_AM400B: + printf("AM29LV400B (4 Mbit, bottom boot sect)\n"); + break; + case FLASH_AM400T: + printf("AM29LV400T (4 Mbit, top boot sector)\n"); + break; + case FLASH_AM800B: + printf("AM29LV800B (8 Mbit, bottom boot sect)\n"); + break; + case FLASH_AM800T: + printf("AM29LV800T (8 Mbit, top boot sector)\n"); + break; + case FLASH_AMD016: + printf("AM29F016D (16 Mbit, uniform sector size)\n"); + break; + case FLASH_AM160B: + printf("AM29LV160B (16 Mbit, bottom boot sect)\n"); + break; + case FLASH_AM160T: + printf("AM29LV160T (16 Mbit, top boot sector)\n"); + break; + case FLASH_AM320B: + printf("AM29LV320B (32 Mbit, bottom boot sect)\n"); + break; + case FLASH_AM320T: + printf("AM29LV320T (32 Mbit, top boot sector)\n"); + break; + case FLASH_AM033C: + printf("AM29LV033C (32 Mbit, top boot sector)\n"); + break; + case FLASH_SST800A: + printf("SST39LF/VF800 (8 Mbit, uniform sector size)\n"); + break; + case FLASH_SST160A: + printf("SST39LF/VF160 (16 Mbit, uniform sector size)\n"); + break; + case FLASH_STMW320DT: + printf ("M29W320DT (32 M, top sector)\n"); + break; + case FLASH_MXLV320T: + printf ("MXLV320T (32 Mbit, top sector)\n"); + break; + default: + printf("Unknown Chip Type\n"); + break; + } + + printf(" Size: %ld KB in %d Sectors\n", + info->size >> 10, info->sector_count); + + printf(" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; ++i) { + /* + * Check if whole sector is erased + */ + if (i != (info->sector_count - 1)) + size = info->start[i + 1] - info->start[i]; + else + size = info->start[0] + info->size - info->start[i]; + erased = 1; + flash = (volatile unsigned long *)info->start[i]; + size = size >> 2; /* divide by 4 for longword access */ + for (k = 0; k < size; k++) { + if (*flash++ != 0xffffffff) { + erased = 0; + break; + } + } + + if ((i % 5) == 0) + printf("\n "); + printf(" %08lX%s%s", + info->start[i], + erased ? " E" : " ", info->protect[i] ? "RO " : " "); + } + printf("\n"); + return; +} + +/* + * The following code cannot be run from FLASH! + */ +#ifdef CFG_FLASH_2ND_16BIT_DEV +static ulong flash_get_size(vu_long * addr, flash_info_t * info) +{ + /* bit 0 used for big flash marking */ + if ((ulong)addr & 0x1) { + return flash_get_size_2((vu_long *)((ulong)addr & 0xfffffffe), info); + } else { + return flash_get_size_1(addr, info); + } +} + +static ulong flash_get_size_1(vu_long * addr, flash_info_t * info) +#else +static ulong flash_get_size(vu_long * addr, flash_info_t * info) +#endif +{ + short i; + CFG_FLASH_WORD_SIZE value; + ulong base = (ulong) addr; + volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr; + + DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr); + + /* Write auto select command: read Manufacturer ID */ + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090; + udelay(1000); + + value = addr2[0]; + DEBUGF("FLASH MANUFACT: %x\n", value); + + switch (value) { + case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT: + info->flash_id = FLASH_MAN_AMD; + break; + case (CFG_FLASH_WORD_SIZE) FUJ_MANUFACT: + info->flash_id = FLASH_MAN_FUJ; + break; + case (CFG_FLASH_WORD_SIZE) SST_MANUFACT: + info->flash_id = FLASH_MAN_SST; + break; + case (CFG_FLASH_WORD_SIZE) STM_MANUFACT: + info->flash_id = FLASH_MAN_STM; + break; + default: + info->flash_id = FLASH_UNKNOWN; + info->sector_count = 0; + info->size = 0; + return (0); /* no or unknown flash */ + } + + value = addr2[1]; /* device ID */ + DEBUGF("\nFLASH DEVICEID: %x\n", value); + + switch (value) { + case (CFG_FLASH_WORD_SIZE) AMD_ID_LV040B: + info->flash_id += FLASH_AM040; + info->sector_count = 8; + info->size = 0x0080000; /* => 512 ko */ + break; + + case (CFG_FLASH_WORD_SIZE) AMD_ID_F040B: + info->flash_id += FLASH_AM040; + info->sector_count = 8; + info->size = 0x0080000; /* => 512 ko */ + break; + + case (CFG_FLASH_WORD_SIZE) STM_ID_M29W040B: + info->flash_id += FLASH_AM040; + info->sector_count = 8; + info->size = 0x0080000; /* => 512 ko */ + break; + + case (CFG_FLASH_WORD_SIZE) AMD_ID_F016D: + info->flash_id += FLASH_AMD016; + info->sector_count = 32; + info->size = 0x00200000; + break; /* => 2 MB */ + + case (CFG_FLASH_WORD_SIZE) AMD_ID_LV033C: + info->flash_id += FLASH_AMDLV033C; + info->sector_count = 64; + info->size = 0x00400000; + break; /* => 4 MB */ + + case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400T: + info->flash_id += FLASH_AM400T; + info->sector_count = 11; + info->size = 0x00080000; + break; /* => 0.5 MB */ + + case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400B: + info->flash_id += FLASH_AM400B; + info->sector_count = 11; + info->size = 0x00080000; + break; /* => 0.5 MB */ + + case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800T: + info->flash_id += FLASH_AM800T; + info->sector_count = 19; + info->size = 0x00100000; + break; /* => 1 MB */ + + case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800B: + info->flash_id += FLASH_AM800B; + info->sector_count = 19; + info->size = 0x00100000; + break; /* => 1 MB */ + + case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160T: + info->flash_id += FLASH_AM160T; + info->sector_count = 35; + info->size = 0x00200000; + break; /* => 2 MB */ + + case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160B: + info->flash_id += FLASH_AM160B; + info->sector_count = 35; + info->size = 0x00200000; + break; /* => 2 MB */ + + default: + info->flash_id = FLASH_UNKNOWN; + return (0); /* => no or unknown flash */ + } + + /* set up sector start address table */ + if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMD016)) { + for (i = 0; i < info->sector_count; i++) + info->start[i] = base + (i * 0x00010000); + } else { + if (info->flash_id & FLASH_BTYPE) { + /* set sector offsets for bottom boot block type */ + info->start[0] = base + 0x00000000; + info->start[1] = base + 0x00004000; + info->start[2] = base + 0x00006000; + info->start[3] = base + 0x00008000; + for (i = 4; i < info->sector_count; i++) { + info->start[i] = + base + (i * 0x00010000) - 0x00030000; + } + } else { + /* set sector offsets for top boot block type */ + i = info->sector_count - 1; + info->start[i--] = base + info->size - 0x00004000; + info->start[i--] = base + info->size - 0x00006000; + info->start[i--] = base + info->size - 0x00008000; + for (; i >= 0; i--) { + info->start[i] = base + i * 0x00010000; + } + } + } + + /* check for protected sectors */ + for (i = 0; i < info->sector_count; i++) { + /* read sector protection at sector address, (A7 .. A0) = 0x02 */ + /* D0 = 1 if protected */ + addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]); + + /* For AMD29033C flash we need to resend the command of * + * reading flash protection for upper 8 Mb of flash */ + if (i == 32) { + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA; + addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555; + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090; + } + + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) + info->protect[i] = 0; + else + info->protect[i] = addr2[2] & 1; + } + + /* issue bank reset to return to read mode */ + addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; + + return (info->size); +} + +static int wait_for_DQ7_1(flash_info_t * info, int sect) +{ + ulong start, now, last; + volatile CFG_FLASH_WORD_SIZE *addr = + (CFG_FLASH_WORD_SIZE *) (info->start[sect]); + + start = get_timer(0); + last = start; + while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) != + (CFG_FLASH_WORD_SIZE) 0x00800080) { + if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { + printf("Timeout\n"); + return -1; + } + /* show that we're waiting */ + if ((now - last) > 1000) { /* every second */ + putc('.'); + last = now; + } + } + return 0; +} + +#ifdef CFG_FLASH_2ND_16BIT_DEV +int flash_erase(flash_info_t * info, int s_first, int s_last) +{ + if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T)) { + return flash_erase_2(info, s_first, s_last); + } else { + return flash_erase_1(info, s_first, s_last); + } +} + +static int flash_erase_1(flash_info_t * info, int s_first, int s_last) +#else +int flash_erase(flash_info_t * info, int s_first, int s_last) +#endif +{ + volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]); + volatile CFG_FLASH_WORD_SIZE *addr2; + int flag, prot, sect, l_sect; + int i; + + if ((s_first < 0) || (s_first > s_last)) { + if (info->flash_id == FLASH_UNKNOWN) { + printf("- missing\n"); + } else { + printf("- no sectors to erase\n"); + } + return 1; + } + + if (info->flash_id == FLASH_UNKNOWN) { + printf("Can't erase unknown flash type - aborted\n"); + return 1; + } + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + + if (prot) { + printf("- Warning: %d protected sectors will not be erased!\n", + prot); + } else { + printf("\n"); + } + + l_sect = -1; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect <= s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]); + + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) { + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080; + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00500050; /* block erase */ + for (i = 0; i < 50; i++) + udelay(1000); /* wait 1 ms */ + } else { + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080; + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030; /* sector erase */ + } + l_sect = sect; + /* + * Wait for each sector to complete, it's more + * reliable. According to AMD Spec, you must + * issue all erase commands within a specified + * timeout. This has been seen to fail, especially + * if printf()s are included (for debug)!! + */ + wait_for_DQ7_1(info, sect); + } + } + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + /* wait at least 80us - let's wait 1 ms */ + udelay(1000); + + /* reset to read mode */ + addr = (CFG_FLASH_WORD_SIZE *) info->start[0]; + addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */ + + printf(" done\n"); + return 0; +} + +/*----------------------------------------------------------------------- + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) +{ + ulong cp, wp, data; + int i, l, rc; + + wp = (addr & ~3); /* get lower word aligned address */ + + /* + * handle unaligned start bytes + */ + if ((l = addr - wp) != 0) { + data = 0; + for (i = 0, cp = wp; i < l; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + for (; i < 4 && cnt > 0; ++i) { + data = (data << 8) | *src++; + --cnt; + ++cp; + } + for (; cnt == 0 && i < 4; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + + if ((rc = write_word(info, wp, data)) != 0) { + return (rc); + } + wp += 4; + } + + /* + * handle word aligned part + */ + while (cnt >= 4) { + data = 0; + for (i = 0; i < 4; ++i) { + data = (data << 8) | *src++; + } + if ((rc = write_word(info, wp, data)) != 0) { + return (rc); + } + wp += 4; + cnt -= 4; + } + + if (cnt == 0) { + return (0); + } + + /* + * handle unaligned tail bytes + */ + data = 0; + for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) { + data = (data << 8) | *src++; + --cnt; + } + for (; i < 4; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + + return (write_word(info, wp, data)); +} + +/*----------------------------------------------------------------------- + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +#ifdef CFG_FLASH_2ND_16BIT_DEV +static int write_word(flash_info_t * info, ulong dest, ulong data) +{ + if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T)) { + return write_word_2(info, dest, data); + } else { + return write_word_1(info, dest, data); + } +} + +static int write_word_1(flash_info_t * info, ulong dest, ulong data) +#else +static int write_word(flash_info_t * info, ulong dest, ulong data) +#endif +{ + volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]); + volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest; + volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data; + ulong start; + int i; + + /* Check if Flash is (sufficiently) erased */ + if ((*((vu_long *)dest) & data) != data) { + return (2); + } + + for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) { + int flag; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0; + + dest2[i] = data2[i]; + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + /* data polling for D7 */ + start = get_timer(0); + while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080) != + (data2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080)) { + + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + return (1); + } + } + } + + return (0); +} + +#ifdef CFG_FLASH_2ND_16BIT_DEV + +#undef CFG_FLASH_WORD_SIZE +#define CFG_FLASH_WORD_SIZE unsigned short + +/* + * The following code cannot be run from FLASH! + */ +static ulong flash_get_size_2(vu_long * addr, flash_info_t * info) +{ + short i; + int n; + CFG_FLASH_WORD_SIZE value; + ulong base = (ulong) addr; + volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr; + + DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr); + + /* issue bank reset to return to read mode */ + addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; + /* Write auto select command: read Manufacturer ID */ + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090; + udelay(1000); + + value = addr2[0]; + DEBUGF("FLASH MANUFACT: %x\n", value); + +#if 0 /* TODO: remove ifdef when Flash responds correctly */ + switch (value) { + case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT: + info->flash_id = FLASH_MAN_AMD; + break; + case (CFG_FLASH_WORD_SIZE) FUJ_MANUFACT: + info->flash_id = FLASH_MAN_FUJ; + break; + case (CFG_FLASH_WORD_SIZE) SST_MANUFACT: + info->flash_id = FLASH_MAN_SST; + break; + case (CFG_FLASH_WORD_SIZE) STM_MANUFACT: + info->flash_id = FLASH_MAN_STM; + break; + case (CFG_FLASH_WORD_SIZE) MX_MANUFACT: + info->flash_id = FLASH_MAN_MX; + break; + default: + info->flash_id = FLASH_UNKNOWN; + info->sector_count = 0; + info->size = 0; + return (0); /* no or unknown flash */ + } +#endif /* TODO: remove ifdef when Flash responds correctly */ + + /* + * TODO: Start + * uncomment block above when Flash responds correctly. + * also remove the lines below: + */ + info->flash_id = FLASH_MAN_AMD; + DEBUGF("FLASH MANUFACT: FLASH_MAN_AMD\n"); + /* TODO: End */ + + value = addr2[1]; /* device ID */ + + DEBUGF("\nFLASH DEVICEID: %x\n", value); + +#if 0 /* TODO: remove ifdef when Flash responds correctly */ + switch (value) { + + case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320T: + info->flash_id += FLASH_AM320T; + info->sector_count = 71; + info->size = 0x00400000; break; /* => 4 MB */ + + case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320B: + info->flash_id += FLASH_AM320B; + info->sector_count = 71; + info->size = 0x00400000; break; /* => 4 MB */ + + case (CFG_FLASH_WORD_SIZE)STM_ID_29W320DT: + info->flash_id += FLASH_STMW320DT; + info->sector_count = 67; + info->size = 0x00400000; break; /* => 4 MB */ + + case (CFG_FLASH_WORD_SIZE)MX_ID_LV320T: + info->flash_id += FLASH_MXLV320T; + info->sector_count = 71; + info->size = 0x00400000; break; /* => 4 MB */ + + default: + info->flash_id = FLASH_UNKNOWN; + return (0); /* => no or unknown flash */ + } +#endif /* TODO: remove ifdef when Flash responds correctly */ + + /* + * TODO: Start + * uncomment block above when Flash responds correctly. + * also remove the lines below: + */ + DEBUGF("\nFLASH DEVICEID: FLASH_AM320T\n"); + info->flash_id += FLASH_AM320T; + info->sector_count = 71; + info->size = 0x00400000; /* => 4 MB */ + /* TODO: End */ + + /* set up sector start address table */ + if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMD016)) { + for (i = 0; i < info->sector_count; i++) + info->start[i] = base + (i * 0x00010000); + } else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) { + /* set sector offsets for top boot block type */ + base += info->size; + i = info->sector_count; + /* 1 x 16k boot sector */ + base -= 16 << 10; + --i; + info->start[i] = base; + /* 2 x 8k boot sectors */ + for (n=0; n<2; ++n) { + base -= 8 << 10; + --i; + info->start[i] = base; + } + /* 1 x 32k boot sector */ + base -= 32 << 10; + --i; + info->start[i] = base; + + while (i > 0) { /* 64k regular sectors */ + base -= 64 << 10; + --i; + info->start[i] = base; + } + } else if ( ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T) || + ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ) { + i = info->sector_count - 1; + info->start[i--] = base + info->size - 0x00002000; + info->start[i--] = base + info->size - 0x00004000; + info->start[i--] = base + info->size - 0x00006000; + info->start[i--] = base + info->size - 0x00008000; + info->start[i--] = base + info->size - 0x0000a000; + info->start[i--] = base + info->size - 0x0000c000; + info->start[i--] = base + info->size - 0x0000e000; + info->start[i--] = base + info->size - 0x00010000; + for (; i >= 0; i--) { + info->start[i] = base + i * 0x00010000; + } + } + else { + if (info->flash_id & FLASH_BTYPE){ + /* set sector offsets for bottom boot block type */ + info->start[0] = base + 0x00000000; + info->start[1] = base + 0x00004000; + info->start[2] = base + 0x00006000; + info->start[3] = base + 0x00008000; + for (i = 4; i < info->sector_count; i++) { + info->start[i] = + base + (i * 0x00010000) - 0x00030000; + } + } else { + /* set sector offsets for top boot block type */ + i = info->sector_count - 1; + info->start[i--] = base + info->size - 0x00004000; + info->start[i--] = base + info->size - 0x00006000; + info->start[i--] = base + info->size - 0x00008000; + for (; i >= 0; i--) { + info->start[i] = base + i * 0x00010000; + } + } + } + + /* check for protected sectors */ + for (i = 0; i < info->sector_count; i++) { + /* read sector protection at sector address,(A7 .. A0) = 0x02 */ + /* D0 = 1 if protected */ + addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]); + + /* For AMD29033C flash we need to resend the command of * + * reading flash protection for upper 8 Mb of flash */ + if (i == 32) { + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA; + addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555; + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090; + } + + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) + info->protect[i] = 0; + else + info->protect[i] = addr2[2] & 1; + } + + /* issue bank reset to return to read mode */ + addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; + + return (info->size); +} + +/* + * TODO: FIX: this wait loop sometimes fails: DQ7 indicates the erase command + * never was accepted (i.e. didn't start) - why???? + */ +static int wait_for_DQ7_2(flash_info_t * info, int sect) +{ + ulong start, now, last, counter = 0; + volatile CFG_FLASH_WORD_SIZE *addr = + (CFG_FLASH_WORD_SIZE *) (info->start[sect]); + + start = get_timer(0); + DEBUGF("DQ7_2: start = 0x%08lx\n", start); + last = start; + while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) != + (CFG_FLASH_WORD_SIZE) 0x00800080) { + DEBUGF("DQ7_2: start = 0x%08lx, now = 0x%08lx\n", start, now); + if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { + printf("Timeout\n"); + return -1; + } + /* show that we're waiting */ + if ((now - last) > 1000) { /* every second */ + putc('.'); + last = now; + } + udelay(1000000); /* 1 sec */ + putc('.'); + counter++; + if (counter > 5) { + return -1; + } + DEBUGF("DQ7_2: now = 0x%08lx, last = 0x%08lx\n", now, last); + } + return 0; +} + +static void wr_flash_cmd(ulong sector, ushort addr, CFG_FLASH_WORD_SIZE value) +{ + int fw_size; + + fw_size = sizeof(value); + switch (fw_size) + { + case 1: + out8((ulong)(sector + addr), value); + break; + case 2: + out16((ulong)(sector + (addr << 1)), value); + break; + default: + printf("flash_erase: error incorrect chip programing size.\n"); + } + return; +} + +static int flash_erase_2(flash_info_t * info, int s_first, int s_last) +{ + volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]); + volatile CFG_FLASH_WORD_SIZE *addr2; + int flag, prot, sect, l_sect, count = 0; + int i; + + if ((s_first < 0) || (s_first > s_last)) { + if (info->flash_id == FLASH_UNKNOWN) { + printf("- missing\n"); + } else { + printf("- no sectors to erase\n"); + } + return 1; + } + + if (info->flash_id == FLASH_UNKNOWN) { + printf("Can't erase unknown flash type - aborted\n"); + return 1; + } + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + + if (prot) { + printf("- Warning: %d protected sectors will not be erased!\n", + prot); + } else { + printf("\n"); + } + + l_sect = -1; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + /* Start erase on unprotected sectors */ + for (sect = s_first, count = 0; sect <= s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]); + + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) { + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080; + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00500050; /* block erase */ + for (i = 0; i < 50; i++) + udelay(1000); /* wait 1 ms */ + } else { + /* + * TODO: fix code + */ + wr_flash_cmd((ulong)addr, 0, (CFG_FLASH_WORD_SIZE) 0x00F000F0); + wr_flash_cmd((ulong)addr, CFG_FLASH_ADDR0, (CFG_FLASH_WORD_SIZE) 0x00AA00AA); + wr_flash_cmd((ulong)addr, CFG_FLASH_ADDR1, (CFG_FLASH_WORD_SIZE) 0x00550055); + wr_flash_cmd((ulong)addr, CFG_FLASH_ADDR0, (CFG_FLASH_WORD_SIZE) 0x00800080); + wr_flash_cmd((ulong)addr, CFG_FLASH_ADDR0, (CFG_FLASH_WORD_SIZE) 0x00AA00AA); + wr_flash_cmd((ulong)addr, CFG_FLASH_ADDR1, (CFG_FLASH_WORD_SIZE) 0x00550055); + wr_flash_cmd((ulong)addr2, 0, (CFG_FLASH_WORD_SIZE) 0x00300030); + udelay(2000000); /* 2 sec */ + wr_flash_cmd((ulong)addr, 0, (CFG_FLASH_WORD_SIZE) 0x00F000F0); + +#if 0 + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080; + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030; /* sector erase */ +#endif + } + l_sect = sect; + printf(".."); + printf(".."); + /* + * Wait for each sector to complete, it's more + * reliable. According to AMD Spec, you must + * issue all erase commands within a specified + * timeout. This has been seen to fail, especially + * if printf()s are included (for debug)!! + */ + wait_for_DQ7_2(info, sect); + count++; + } + } + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + /* wait at least 80us - let's wait 1 ms */ + udelay(1000); + + /* reset to read mode */ + addr = (CFG_FLASH_WORD_SIZE *) info->start[0]; + addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */ + + printf(" done\n"); + + if (count > 0) { + return 0; + } else { + return 1; + } +} + +static int write_word_2(flash_info_t * info, ulong dest, ulong data) +{ + volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]); + volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest; + volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data; + ulong start; + int i; + + /* Check if Flash is (sufficiently) erased */ + if ((*((vu_long *)dest) & data) != data) { + return (2); + } + + for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) { + int flag; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0; + + dest2[i] = data2[i]; + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + /* data polling for D7 */ + start = get_timer(0); + while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080) != + (data2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080)) { + + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + return (1); + } + } + } + + return (0); +} +#endif /* CFG_FLASH_2ND_16BIT_DEV */ + +/*----------------------------------------------------------------------- + * Functions + */ +static ulong flash_get_size(vu_long * addr, flash_info_t * info); +static int write_word(flash_info_t * info, ulong dest, ulong data); + +/*----------------------------------------------------------------------- + */ + +unsigned long flash_init(void) +{ + unsigned long total_b = 0; + unsigned long size_b[CFG_MAX_FLASH_BANKS]; + unsigned short index = 0; + int i; + + index = 0; + + DEBUGF("\n"); + DEBUGF("FLASH: Index: %d\n", index); + + /* Init: no FLASHes known */ + for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) { + flash_info[i].flash_id = FLASH_UNKNOWN; + flash_info[i].sector_count = -1; + flash_info[i].size = 0; + + /* check whether the address is 0 */ + if (flash_addr_table[index][i] == 0) { + continue; + } + + /* call flash_get_size() to initialize sector address */ + size_b[i] = flash_get_size((vu_long *) flash_addr_table[index][i], + &flash_info[i]); + flash_info[i].size = size_b[i]; + if (flash_info[i].flash_id == FLASH_UNKNOWN) { + printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n", + i, size_b[i], size_b[i] << 20); + flash_info[i].sector_count = -1; + flash_info[i].size = 0; + } + + /* Monitor protection ON by default */ + (void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE, + CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1, + &flash_info[i]); +#if defined(CFG_ENV_IS_IN_FLASH) + (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR, + CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1, + &flash_info[i]); +#if defined(CFG_ENV_IS_IN_FLASH) && defined(CFG_ENV_ADDR_REDUND) + (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND, + CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1, + &flash_info[i]); +#endif +#endif + + total_b += flash_info[i].size; + } + + return total_b; +} diff --git a/board/amcc/acadia/memory.c b/board/amcc/acadia/memory.c new file mode 100644 index 0000000000..0f1de71c1b --- /dev/null +++ b/board/amcc/acadia/memory.c @@ -0,0 +1,564 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#define CRAM_BANK0_BASE 0x0 +#define CRAM_DIDR 0x00100000 +#define MICRON_MT45W8MW16BGX_CRAM_ID 0x1b431b43 +#define MICRON_MT45W8MW16BGX_CRAM_ID2 0x13431343 +#define MICRON_DIDR_VENDOR_ID 0x00030003 /* 00011b */ +#define CRAM_DIDR_VENDOR_ID_MASK 0x001f001f /* DIDR[4:0] */ +#define CRAM_DEVID_NOT_SUPPORTED 0x00000000 + +#define PSRAM_PASS 0x50415353 /* "PASS" */ +#define PSRAM_FAIL 0x4641494C /* "FAIL" */ + +static u32 is_cram_inited(void); +static u32 is_cram(void); +static long int cram_init(u32); +static void cram_bcr_write(u32); +void udelay (unsigned long); + +void sdram_init(void) +{ + volatile unsigned long spr_reg; + + /* + * If CRAM not initialized or CRAM looks initialized because this + * is after a warm reboot then set SPRG7 to indicate CRAM needs + * initialization. Note that CRAM is initialized by the SPI and + * NAND preloader. + */ + spr_reg = (volatile unsigned long) mfspr(SPRG6); + if ((is_cram_inited() != 1) || (spr_reg != LOAK_SPL)) { + mtspr(SPRG7, LOAK_NONE); /* "NONE" */ + } + +#if 1 + /* + * When running the NAND SPL, the normal EBC configuration is not + * done, so We need to enable EPLD access on EBC_CS_2 and the memory + * on EBC_CS_3 + */ + + /* Enable CPLD - Needed for PSRAM Access */ + + + /* Init SDRAM by setting EBC Bank 3 for PSRAM */ + mtebc(pb1ap, CFG_EBC_PB1AP); + mtebc(pb1cr, CFG_EBC_PB1CR); + + mtebc(pb2ap, CFG_EBC_PB2AP); + mtebc(pb2cr, CFG_EBC_PB2CR); + + /* pre-boot loader code: we are in OCM */ + mtspr(SPRG6, LOAK_SPL); /* "SPL " */ + mtspr(SPRG7, LOAK_OCM); /* "OCM " */ +#endif + + return; +} + +static void cram_bcr_write(u32 wr_val) +{ + u32 tmp_reg; + u32 val; + volatile u32 gpio_reg; + + /* # Program CRAM write */ + + /* + * set CRAM_CRE = 0x1 + * set wr_val = wr_val << 2 + */ + gpio_reg = in32(GPIO1_OR); + out32(GPIO1_OR, gpio_reg | 0x00000400); + wr_val = wr_val << 2; + /* wr_val = 0x1c048; */ + + + /* + * # stop PLL clock before programming CRAM + * set EPLD0_MUX_CTL.OESPR3 = 1 + * delay 2 + */ + + + /* + * # CS1 + * read 0x00200000 + * #shift 2 bit left before write + * set val = wr_val + 0x00200000 + * write dmem val 0 + * read 0x00200000 val + * print val/8x + */ + tmp_reg = in32(0x00200000); + val = wr_val + 0x00200000; + /* val = 0x0021c048; */ + out32(val, 0x0000); + udelay(100000); + val = in32(0x00200000); + + debug("CRAM VAL: %x for CS1 ", val); + + /* + * # CS2 + * read 0x02200000 + * #shift 2 bit left before write + * set val = wr_val + 0x02200000 + * write dmem val 0 + * read 0x02200000 val + * print val/8x + */ + tmp_reg = in32(0x02200000); + val = wr_val + 0x02200000; + /* val = 0x0221c048; */ + out32(val, 0x0000); + udelay(100000); + val = in32(0x02200000); + + debug("CRAM VAL: %x for CS2 ", val); + + /* + * # Start PLL clock before programming CRAM + * set EPLD0_MUX_CTL.OESPR3 = 0 + */ + + + /* + * set CRAMCR = 0x1 + */ + gpio_reg = in32(GPIO1_OR); + out32(GPIO1_OR, gpio_reg | 0x00000400); + + /* + * # read CRAM config BCR ( bit19:18 = 10b ) + * #read 0x00200000 + * # 1001_1001_0001_1111 ( 991f ) => + * #10_0110_0100_0111_1100 => 2647c => 0022647c + * #0011_0010_0011_1110 (323e) + * # + */ + + /* + * set EPLD0_MUX_CTL.CRAMCR = 0x0 + */ + gpio_reg = in32(GPIO1_OR); + out32(GPIO1_OR, gpio_reg & 0xFFFFFBFF); + return; +} + +static u32 is_cram_inited() +{ + volatile unsigned long spr_reg; + + /* + * If CRAM is initialized already, then don't reinitialize it again. + * In the case of NAND boot and SPI boot, CRAM will already be + * initialized by the pre-loader + */ + spr_reg = (volatile unsigned long) mfspr(SPRG7); + if (spr_reg == LOAK_CRAM) { + return 1; + } else { + return 0; + } +} + +/****** + * return 0 if not CRAM + * return 1 if CRAM and it's already inited by preloader + * else return cram_id (CRAM Device Identification Register) + ******/ +static u32 is_cram(void) +{ + u32 gpio_TCR, gpio_OSRL, gpio_OR, gpio_ISR1L; + volatile u32 gpio_reg; + volatile u32 cram_id = 0; + + if (is_cram_inited() == 1) { + /* this is CRAM and it is already inited (by preloader) */ + cram_id = 1; + } else { + /* + * # CRAM CLOCK + * set GPIO0_TCR.G8 = 1 + * set GPIO0_OSRL.G8 = 0 + * set GPIO0_OR.G8 = 0 + */ + gpio_reg = in32(GPIO0_TCR); + gpio_TCR = gpio_reg; + out32(GPIO0_TCR, gpio_reg | 0x00800000); + gpio_reg = in32(GPIO0_OSRL); + gpio_OSRL = gpio_reg; + out32(GPIO0_OSRL, gpio_reg & 0xffffbfff); + gpio_reg = in32(GPIO0_OR); + gpio_OR = gpio_reg; + out32(GPIO0_OR, gpio_reg & 0xff7fffff); + + /* + * # CRAM Addreaa Valid + * set GPIO0_TCR.G10 = 1 + * set GPIO0_OSRL.G10 = 0 + * set GPIO0_OR.G10 = 0 + */ + gpio_reg = in32(GPIO0_TCR); + out32(GPIO0_TCR, gpio_reg | 0x00200000); + gpio_reg = in32(GPIO0_OSRL); + out32(GPIO0_OSRL, gpio_reg & 0xfffffbff); + gpio_reg = in32(GPIO0_OR); + out32(GPIO0_OR, gpio_reg & 0xffdfffff); + + /* + * # config input (EBC_WAIT) + * set GPIO0_ISR1L.G9 = 1 + * set GPIO0_TCR.G9 = 0 + */ + gpio_reg = in32(GPIO0_ISR1L); + gpio_ISR1L = gpio_reg; + out32(GPIO0_ISR1L, gpio_reg | 0x00001000); + gpio_reg = in32(GPIO0_TCR); + out32(GPIO0_TCR, gpio_reg & 0xffbfffff); + + /* + * Enable CRE to read Registers + * set GPIO0_TCR.21 = 1 + * set GPIO1_OR.21 = 1 + */ + gpio_reg = in32(GPIO1_TCR); + out32(GPIO1_TCR, gpio_reg | 0x00000400); + + gpio_reg = in32(GPIO1_OR); + out32(GPIO1_OR, gpio_reg | 0x00000400); + + + + + /* Read Version ID */ + cram_id = (volatile u32) in32(CRAM_BANK0_BASE+CRAM_DIDR); + udelay(100000); + + asm volatile(" sync"); + asm volatile(" eieio"); + + debug("Cram ID: %X ", cram_id); + + switch (cram_id) { + case MICRON_MT45W8MW16BGX_CRAM_ID: + case MICRON_MT45W8MW16BGX_CRAM_ID2: + /* supported CRAM vendor/part */ + break; + case CRAM_DEVID_NOT_SUPPORTED: + default: + /* check for DIDR Vendor ID of Micron */ + if ((cram_id & CRAM_DIDR_VENDOR_ID_MASK) == + MICRON_DIDR_VENDOR_ID) + { + /* supported CRAM vendor */ + break; + } + /* this is not CRAM or not supported CRAM vendor/part */ + cram_id = 0; + /* + * reset the GPIO registers to the values that were + * there before this routine + */ + out32(GPIO0_TCR, gpio_TCR); + out32(GPIO0_OSRL, gpio_OSRL); + out32(GPIO0_OR, gpio_OR); + out32(GPIO0_ISR1L, gpio_ISR1L); + break; + } + } + + return cram_id; +} + +static long int cram_init(u32 already_inited) +{ + volatile u32 tmp_reg; + u32 cram_wr_val; + + if (already_inited == 0) return 0; + + /* + * If CRAM is initialized already, then don't reinitialize it again. + * In the case of NAND boot and SPI boot, CRAM will already be + * initialized by the pre-loader + */ + if (already_inited != 1) + { + /* + * #o CRAM Card + * # - CRAMCRE @reg16 = 1; for CRAM to use + * # - CRAMCRE @reg16 = 0; for CRAM to program + * + * # enable CRAM SEL, move from setEPLD.cmd + * set EPLD0_MUX_CTL.OECRAM = 0 + * set EPLD0_MUX_CTL.CRAMCR = 1 + * set EPLD0_ETHRSTBOOT.SLCRAM = 0 + * #end + */ + + + /* + * #1. EBC need to program READY, CLK, ADV for ASync mode + * # config output + */ + + /* + * # CRAM CLOCK + * set GPIO0_TCR.G8 = 1 + * set GPIO0_OSRL.G8 = 0 + * set GPIO0_OR.G8 = 0 + */ + tmp_reg = in32(GPIO0_TCR); + out32(GPIO0_TCR, tmp_reg | 0x00800000); + tmp_reg = in32(GPIO0_OSRL); + out32(GPIO0_OSRL, tmp_reg & 0xffffbfff); + tmp_reg = in32(GPIO0_OR); + out32(GPIO0_OR, tmp_reg & 0xff7fffff); + + /* + * # CRAM Addreaa Valid + * set GPIO0_TCR.G10 = 1 + * set GPIO0_OSRL.G10 = 0 + * set GPIO0_OR.G10 = 0 + */ + tmp_reg = in32(GPIO0_TCR); + out32(GPIO0_TCR, tmp_reg | 0x00200000); + tmp_reg = in32(GPIO0_OSRL); + out32(GPIO0_OSRL, tmp_reg & 0xfffffbff); + tmp_reg = in32(GPIO0_OR); + out32(GPIO0_OR, tmp_reg & 0xffdfffff); + + /* + * # config input (EBC_WAIT) + * set GPIO0_ISR1L.G9 = 1 + * set GPIO0_TCR.G9 = 0 + */ + tmp_reg = in32(GPIO0_ISR1L); + out32(GPIO0_ISR1L, tmp_reg | 0x00001000); + tmp_reg = in32(GPIO0_TCR); + out32(GPIO0_TCR, tmp_reg & 0xffbfffff); + + /* + * # config CS4 from GPIO + * set GPIO0_TCR.G0 = 1 + * set GPIO0_OSRL.G0 = 1 + */ + tmp_reg = in32(GPIO0_TCR); + out32(GPIO0_TCR, tmp_reg | 0x80000000); + tmp_reg = in32(GPIO0_OSRL); + out32(GPIO0_OSRL, tmp_reg | 0x40000000); + + /* + * #2. EBC in Async mode + * # set EBC0_PB1AP = 0x078f0ec0 + * set EBC0_PB1AP = 0x078f1ec0 + * set EBC0_PB2AP = 0x078f1ec0 + */ + mtebc(pb1ap, 0x078F1EC0); + mtebc(pb2ap, 0x078F1EC0); + + /* + * #set EBC0_PB1CR = 0x000bc000 + * #enable CS2 for CRAM + * set EBC0_PB2CR = 0x020bc000 + */ + mtebc(pb1cr, 0x000BC000); + mtebc(pb2cr, 0x020BC000); + + /* + * #3. set CRAM in Sync mode + * #exec cm_bcr_write.cmd { 0x701f } + * #3. set CRAM in Sync mode (full drv strength) + * exec cm_bcr_write.cmd { 0x701F } + */ + cram_wr_val = 0x7012; /* CRAM burst setting */ + cram_bcr_write(cram_wr_val); + + /* + * #4. EBC in Sync mode + * #set EBC0_PB1AP = 0x9f800fc0 + * #set EBC0_PB1AP = 0x900001c0 + * set EBC0_PB2AP = 0x9C0201c0 + * set EBC0_PB2AP = 0x9C0201c0 + */ + mtebc(pb1ap, 0x9C0201C0); + mtebc(pb2ap, 0x9C0201C0); + + /* + * #5. EBC need to program READY, CLK, ADV for Sync mode + * # config output + * set GPIO0_TCR.G8 = 1 + * set GPIO0_OSRL.G8 = 1 + * set GPIO0_TCR.G10 = 1 + * set GPIO0_OSRL.G10 = 1 + */ + tmp_reg = in32(GPIO0_TCR); + out32(GPIO0_TCR, tmp_reg | 0x00800000); + tmp_reg = in32(GPIO0_OSRL); + out32(GPIO0_OSRL, tmp_reg | 0x00004000); + tmp_reg = in32(GPIO0_TCR); + out32(GPIO0_TCR, tmp_reg | 0x00200000); + tmp_reg = in32(GPIO0_OSRL); + out32(GPIO0_OSRL, tmp_reg | 0x00000400); + + /* + * # config input + * set GPIO0_ISR1L.G9 = 1 + * set GPIO0_TCR.G9 = 0 + */ + tmp_reg = in32(GPIO0_ISR1L); + out32(GPIO0_ISR1L, tmp_reg | 0x00001000); + tmp_reg = in32(GPIO0_TCR); + out32(GPIO0_TCR, tmp_reg & 0xffbfffff); + + /* + * # config EBC to use RDY + * set SDR0_ULTRA0.EBCREN = 1 + */ + mfsdr(sdrultra0, tmp_reg); + mtsdr(sdrultra0, tmp_reg | 0x04000000); + + /* + * set EPLD0_MUX_CTL.OESPR3 = 0 + */ + + + mtspr(SPRG7, LOAK_CRAM); /* "CRAM" */ + } /* if (already_inited != 1) */ + + return (64 * 1024 * 1024); +} + +/****** + * return 0 if not PSRAM + * return 1 if is PSRAM + ******/ +static int is_psram(u32 addr) +{ + u32 test_pattern = 0xdeadbeef; + volatile u32 readback; + + if (addr == CFG_SDRAM_BASE) { + /* This is to temp enable OE for PSRAM */ + out16(EPLD_BASE+EPLD_MUXOE, 0x7f0f); + udelay(10000); + } + + out32(addr, test_pattern); + asm volatile(" sync"); + asm volatile(" eieio"); + + readback = (volatile u32) in32(addr); + asm volatile(" sync"); + asm volatile(" eieio"); + if (readback == test_pattern) { + return 1; + } else { + return 0; + } +} + +static long int psram_init(void) +{ + u32 readback; + long psramsize = 0; + int i; + + /* This is to temp enable OE for PSRAM */ + out16(EPLD_BASE+EPLD_MUXOE, 0x7f0f); + udelay(10000); + + /* + * PSRAM bank 1: read then write to address 0x00000000 + */ + for (i = 0; i < 100; i++) { + if (is_psram(CFG_SDRAM_BASE + (i*256)) == 1) { + readback = PSRAM_PASS; + } else { + readback = PSRAM_FAIL; + break; + } + } + if (readback == PSRAM_PASS) { + debug("psram_init(bank0): pass\n"); + psramsize = (16 * 1024 * 1024); + } else { + debug("psram_init(bank0): fail\n"); + return 0; + } + +#if 0 + /* + * PSRAM bank 1: read then write to address 0x01000000 + */ + for (i = 0; i < 100; i++) { + if (is_psram((1 << 24) + (i*256)) == 1) { + readback = PSRAM_PASS; + } else { + readback = PSRAM_FAIL; + break; + } + } + if (readback == PSRAM_PASS) { + debug("psram_init(bank1): pass\n"); + psramsize = psramsize + (16 * 1024 * 1024); + } +#endif + + mtspr(SPRG7, LOAK_PSRAM); /* "PSRA" - PSRAM */ + + return psramsize; +} + +long int initdram(int board_type) +{ + long int sram_size; + u32 cram_inited; + + /* Determine Attached Memory Expansion Card*/ + cram_inited = is_cram(); + if (cram_inited != 0) { /* CRAM */ + debug("CRAM Expansion Card attached\n"); + sram_size = cram_init(cram_inited); + } else if (is_psram(CFG_SDRAM_BASE+4) == 1) { /* PSRAM */ + debug("PSRAM Expansion Card attached\n"); + sram_size = psram_init(); + } else { /* no SRAM */ + debug("No Memory Card Attached!!\n"); + sram_size = 0; + } + + return sram_size; +} + +int testdram(void) +{ + return (0); +} diff --git a/board/amcc/acadia/u-boot.lds b/board/amcc/acadia/u-boot.lds new file mode 100644 index 0000000000..be030923b8 --- /dev/null +++ b/board/amcc/acadia/u-boot.lds @@ -0,0 +1,150 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + .resetvec 0xFFFFFFFC : + { + *(.resetvec) + } = 0xffff + + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/ppc4xx/start.o (.text) + cpu/ppc4xx/kgdb.o (.text) + cpu/ppc4xx/traps.o (.text) + cpu/ppc4xx/interrupts.o (.text) + cpu/ppc4xx/serial.o (.text) + cpu/ppc4xx/cpu_init.o (.text) + cpu/ppc4xx/speed.o (.text) + common/dlmalloc.o (.text) + lib_generic/crc32.o (.text) + lib_ppc/extable.o (.text) + lib_generic/zlib.o (.text) + +/* . = env_offset;*/ +/* common/environment.o(.text)*/ + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/include/configs/acadia.h b/include/configs/acadia.h new file mode 100755 index 0000000000..9e02ca31b4 --- /dev/null +++ b/include/configs/acadia.h @@ -0,0 +1,424 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************ + * acadia.h - configuration for AMCC Acadia (405EZ) + ***********************************************************************/ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/*----------------------------------------------------------------------- + * High Level Configuration Options + *----------------------------------------------------------------------*/ +#define CONFIG_ACADIA 1 /* Board is Acadia */ +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_405EZ 1 /* Specifc 405EZ support*/ +#undef CFG_DRAM_TEST /* Disable-takes long time */ +#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */ + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ +#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ + +#define CONFIG_NO_SERIAL_EEPROM +/*#undef CONFIG_NO_SERIAL_EEPROM*/ + +#ifdef CONFIG_NO_SERIAL_EEPROM + +/*---------------------------------------------------------------------------- + * PLL settings for 266MHz CPU, 133MHz PLB/SDRAM, 66MHz EBC, 33MHz PCI, + * assuming a 66MHz input clock to the 405EZ. + *---------------------------------------------------------------------------*/ +/* #define PLLMR0_100_100_12 */ +#define PLLMR0_200_133_66 +/* #define PLLMR0_266_160_80 */ +/* #define PLLMR0_333_166_83 */ +#endif + +/*----------------------------------------------------------------------- + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + *----------------------------------------------------------------------*/ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_FLASH_BASE 0xFE000000 +#define CFG_MONITOR_LEN (256 * 1024)/* Reserve 256 kB for Monitor */ +#define CFG_MALLOC_LEN (384 * 1024)/* Reserve 128 kB for malloc() */ +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_USB_HOST 0xef603000 /* USB OHCI 1.1 controller */ + +/* + * Define here the location of the environment variables (FLASH). + * Note: DENX encourages to use redundant environment in FLASH. NVRAM is only + * supported for backward compatibility. + */ +#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) + #define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ +#else + #define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */ +#endif + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "hostname=acadia\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "rootpath=/opt/eldk/ppc_4xx\0" \ + "bootfile=acadia/uImage\0" \ + "kernel_addr=fff10000\0" \ + "ramdisk_addr=fff20000\0" \ + "initrd_high=30000000\0" \ + "load=tftp 200000 acadia/u-boot.bin\0" \ + "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \ + "cp.b ${fileaddr} fffc0000 ${filesize};" \ + "setenv filesize;saveenv\0" \ + "upd=run load;run update\0" \ + "kozio=bootm ffc60000\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_self" + +#if 0 +#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ +#else +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_PHY_ADDR 0 /* PHY address */ +#define CONFIG_NET_MULTI 1 +#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */ + +#define CONFIG_NETCONSOLE /* include NetConsole support */ + +#define CONFIG_USB_OHCI +#define CONFIG_USB_STORAGE + +#if 0 /* test-only */ +#define TEST_ONLY_NAND +#endif + +#ifdef TEST_ONLY_NAND +#define CMD_NAND CFG_CMD_NAND +#else +#define CMD_NAND 0 +#endif + +/* Partitions */ +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION + +#define CONFIG_SUPPORT_VFAT + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DHCP | \ + CFG_CMD_DTT | \ + CFG_CMD_DIAG | \ + CFG_CMD_EEPROM | \ + CFG_CMD_ELF | \ + CFG_CMD_FAT | \ + CFG_CMD_I2C | \ + CFG_CMD_IRQ | \ + CFG_CMD_MII | \ + CMD_NAND | \ + CFG_CMD_NET | \ + CFG_CMD_NFS | \ + CFG_CMD_PCI | \ + CFG_CMD_PING | \ + CFG_CMD_REGINFO | \ + CFG_CMD_SDRAM | \ + CFG_CMD_USB) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */ +#define CFG_BASE_BAUD 691200 +#define CONFIG_BAUDRATE 115200 + +/* The following table includes the supported baudrates */ +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} + +/*----------------------------------------------------------------------- + * I2C + *----------------------------------------------------------------------*/ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +#define CFG_I2C_MULTI_EEPROMS +#define CFG_I2C_EEPROM_ADDR (0xa8>>1) +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_ENABLE +#define CFG_EEPROM_PAGE_WRITE_BITS 3 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 + +/* I2C SYSMON (LM75, AD7414 is almost compatible) */ +#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ +#define CONFIG_DTT_AD7414 1 /* use AD7414 */ +#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ +#define CFG_DTT_MAX_TEMP 70 +#define CFG_DTT_LOW_TEMP -30 +#define CFG_DTT_HYSTERESIS 3 + +#if 0 /* test-only... */ +/*----------------------------------------------------------------------- + * SPI stuff - Define to include SPI control + *----------------------------------------------------------------------- + */ +#define CONFIG_SPI +#endif + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH related + *----------------------------------------------------------------------*/ +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ + +#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE} +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ +#define CFG_MAX_FLASH_SECT 1024 /* sectors per device */ + +#undef CFG_FLASH_CHECKSUM +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#ifdef CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#endif + +#ifdef TEST_ONLY_NAND +/*----------------------------------------------------------------------- + * NAND FLASH + *----------------------------------------------------------------------*/ +#define CFG_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS 1 +#define CFG_NAND_BASE (CFG_NAND + CFG_NAND_CS) +#define CFG_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */ +#endif + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_DCACHE_SIZE 16384 /* For AMCC 405EZ CPU */ +#define CFG_CACHELINE_SIZE 32 /* ... */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value*/ +#endif + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in data cache) + */ +/* use on chip memory ( OCM ) for temperary stack until sdram is tested */ +#define CFG_TEMP_STACK_OCM 1 + +/* On Chip Memory location */ +#define CFG_OCM_DATA_ADDR 0xF8000000 +#define CFG_OCM_DATA_SIZE 0x4000 /* 16K of onchip SRAM */ +#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of SRAM */ +#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */ + +#define CFG_GBL_DATA_SIZE 128 /* size for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * External Bus Controller (EBC) Setup + */ +#define CFG_NAND 0xd0000000 +#define CFG_NAND_CS 0 /* NAND chip connected to CSx */ + +/* Memory Bank 0 (Flash) initialization */ +#define CFG_EBC_PB0AP 0x03337200 +#define CFG_EBC_PB0CR 0xfe0bc000 /* BAS=0xFE0,BS=32MB,BU=R/W,BW=32bit */ + +/* Memory Bank 1 (CRAM) initialization */ +#define CFG_EBC_PB1AP 0x030400c0 +#define CFG_EBC_PB1CR 0x000bc000 + +/* Memory Bank 2 (CRAM) initialization */ +#define CFG_EBC_PB2AP 0x030400c0 +#define CFG_EBC_PB2CR 0x020bc000 + +/* Memory Bank 3 (NAND-FLASH) initialization */ +#define CFG_EBC_PB3AP 0x018003c0 +#define CFG_EBC_PB3CR (CFG_NAND | 0x1c000) + +/* Memory Bank 4 (CPLD) initialization */ +#define CFG_EBC_PB4AP 0x04006000 +#define CFG_EBC_PB4CR 0x80018000 /* BAS=0x000,BS=16MB,BU=R/W,BW=32bit */ + +#define CFG_EBC_CFG 0xf8400000 + +/*----------------------------------------------------------------------- + * Definitions for GPIO_0 setup (PPC405EZ specific) + * + * GPIO0[0-3] - External Bus Controller CS_4 - CS_7 Outputs + * GPIO0[4] - External Bus Controller Hold Input + * GPIO0[5] - External Bus Controller Priority Input + * GPIO0[6] - External Bus Controller HLDA Output + * GPIO0[7] - External Bus Controller Bus Request Output + * GPIO0[8] - CRAM Clk Output + * GPIO0[9] - External Bus Controller Ready Input + * GPIO0[10] - CRAM Adv Output + * GPIO0[11-24] - NAND Flash Control Data -> Bypasses GPIO when enabled + * GPIO0[25] - External DMA Request Input + * GPIO0[26] - External DMA EOT I/O + * GPIO0[25] - External DMA Ack_n Output + * GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs + * GPIO0[28-30] - Trace Outputs / PWM Inputs + * GPIO0[31] - PWM_8 I/O + */ +#define CFG_GPIO0_TCR 0xC0000000 +#define CFG_GPIO0_OSRL 0x50000000 +#define CFG_GPIO0_OSRH 0x00000055 +#define CFG_GPIO0_ISR1L 0x00000000 +#define CFG_GPIO0_ISR1H 0x00000055 +#define CFG_GPIO0_TSRL 0x00000000 +#define CFG_GPIO0_TSRH 0x00000055 + +/*----------------------------------------------------------------------- + * Definitions for GPIO_1 setup (PPC405EZ specific) + * + * GPIO1[0-6] - PWM_9 to PWM_15 I/O + * GPIO1[7] - PWM_DIV_CLK (Out) / IRQ4 Input + * GPIO1[8] - TS5 Output / DAC_IP_TRIG Input + * GPIO1[9] - TS6 Output / ADC_IP_TRIG Input + * GPIO1[10-12] - UART0 Control Inputs + * GPIO1[13] - UART0_DTR_N Output/IEEE_1588_TS Output/TMRCLK Input + * GPIO1[14] - UART0_RTS_N Output/SPI_SS_2_N Output + * GPIO1[15] - SPI_SS_3_N Output/UART0_RI_N Input + * GPIO1[16] - SPI_SS_1_N Output + * GPIO1[17-20] - Trace Output/External Interrupts IRQ0 - IRQ3 inputs + */ +#define CFG_GPIO1_OSRH 0x55455555 +#define CFG_GPIO1_OSRL 0x40000110 +#define CFG_GPIO1_ISR1H 0x00000000 +#define CFG_GPIO1_ISR1L 0x15555445 +#define CFG_GPIO1_TSRH 0x00000000 +#define CFG_GPIO1_TSRL 0x00000000 +#define CFG_GPIO1_TCR 0xFFFF8014 + +/*----------------------------------------------------------------------- + * EPLD Regs. + */ +#define EPLD_BASE 0x80000000 +#define EPLD_ETHRSTBOOT 0x10 +#define EPLD_CTRL 0x14 +#define EPLD_MUXOE 0x16 + +/* + * State definations + */ +#define LOAK_INIT 0x494e4954 /* ASCII "INIT" */ +#define LOAK_NONE 0x4e4f4e45 /* ASCII "NONE" */ +#define LOAK_CRAM 0x4352414d /* ASCII "CRAM" */ +#define LOAK_PSRAM 0x50535241 /* ASCII "PSRA" - PSRAM */ +#define LOAK_OCM 0x4f434d20 /* ASCII "OCM " */ +#define LOAK_ZERO 0x5a45524f /* ASCII "ZERO" */ +#define LOAK_SPL 0x53504c20 /* ASCII "SPL" */ + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ + #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +#endif /* __CONFIG_H */