From: Marek Vasut Date: Sun, 2 Aug 2015 17:10:58 +0000 (+0200) Subject: ddr: altera: sequencer: Pluck out IO_* macros from code X-Git-Tag: v2015.10-rc2~178 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=160695d88612d1e1c094fef33d279c297796b881;p=oweals%2Fu-boot.git ddr: altera: sequencer: Pluck out IO_* macros from code Actually convert the sequencer code to use socfpga_sdram_io_config instead of the IO_* macros. This is just an sed excercise here, no manual coding needed. Signed-off-by: Marek Vasut Acked-by: Dinh Nguyen --- diff --git a/drivers/ddr/altera/sequencer.c b/drivers/ddr/altera/sequencer.c index 754eaa8647..4596f552b3 100644 --- a/drivers/ddr/altera/sequencer.c +++ b/drivers/ddr/altera/sequencer.c @@ -510,7 +510,7 @@ static void scc_mgr_zero_all(void) * but there's no harm updating them several times, so * let's keep the code simple. */ - scc_mgr_set_dqs_bus_in_delay(i, IO_DQS_IN_RESERVE); + scc_mgr_set_dqs_bus_in_delay(i, iocfg->dqs_in_reserve); scc_mgr_set_dqs_en_phase(i, 0); scc_mgr_set_dqs_en_delay(i, 0); } @@ -518,7 +518,7 @@ static void scc_mgr_zero_all(void) for (i = 0; i < rwcfg->mem_if_write_dqs_width; i++) { scc_mgr_set_dqdqs_output_phase(i, 0); /* Arria V/Cyclone V don't have out2. */ - scc_mgr_set_oct_out1_delay(i, IO_DQS_OUT_RESERVE); + scc_mgr_set_oct_out1_delay(i, iocfg->dqs_out_reserve); } } @@ -605,8 +605,8 @@ static void scc_mgr_zero_group(const u32 write_group, const int out_only) scc_mgr_set_dqs_io_in_delay(0); /* Arria V/Cyclone V don't have out2. */ - scc_mgr_set_dqs_out1_delay(IO_DQS_OUT_RESERVE); - scc_mgr_set_oct_out1_delay(write_group, IO_DQS_OUT_RESERVE); + scc_mgr_set_dqs_out1_delay(iocfg->dqs_out_reserve); + scc_mgr_set_oct_out1_delay(write_group, iocfg->dqs_out_reserve); scc_mgr_load_dqs_for_write_group(write_group); /* Multicast to all DQS IO enables (only 1 in total). */ @@ -692,13 +692,13 @@ static void scc_mgr_apply_group_all_out_delay_add(const u32 write_group, /* DQS shift */ new_delay = READ_SCC_DQS_IO_OUT2_DELAY + delay; - if (new_delay > IO_IO_OUT2_DELAY_MAX) { + if (new_delay > iocfg->io_out2_delay_max) { debug_cond(DLEVEL == 1, "%s:%d (%u, %u) DQS: %u > %d; adding %u to OUT1\n", __func__, __LINE__, write_group, delay, new_delay, - IO_IO_OUT2_DELAY_MAX, - new_delay - IO_IO_OUT2_DELAY_MAX); - new_delay -= IO_IO_OUT2_DELAY_MAX; + iocfg->io_out2_delay_max, + new_delay - iocfg->io_out2_delay_max); + new_delay -= iocfg->io_out2_delay_max; scc_mgr_set_dqs_out1_delay(new_delay); } @@ -706,13 +706,13 @@ static void scc_mgr_apply_group_all_out_delay_add(const u32 write_group, /* OCT shift */ new_delay = READ_SCC_OCT_OUT2_DELAY + delay; - if (new_delay > IO_IO_OUT2_DELAY_MAX) { + if (new_delay > iocfg->io_out2_delay_max) { debug_cond(DLEVEL == 1, "%s:%d (%u, %u) DQS: %u > %d; adding %u to OUT1\n", __func__, __LINE__, write_group, delay, - new_delay, IO_IO_OUT2_DELAY_MAX, - new_delay - IO_IO_OUT2_DELAY_MAX); - new_delay -= IO_IO_OUT2_DELAY_MAX; + new_delay, iocfg->io_out2_delay_max, + new_delay - iocfg->io_out2_delay_max); + new_delay -= iocfg->io_out2_delay_max; scc_mgr_set_oct_out1_delay(write_group, new_delay); } @@ -1555,7 +1555,7 @@ static int find_vfifo_failing_read(const u32 grp) static int sdr_find_phase_delay(int working, int delay, const u32 grp, u32 *work, const u32 work_inc, u32 *pd) { - const u32 max = delay ? IO_DQS_EN_DELAY_MAX : IO_DQS_EN_PHASE_MAX; + const u32 max = delay ? iocfg->dqs_en_delay_max : iocfg->dqs_en_phase_max; u32 ret; for (; *pd <= max; (*pd)++) { @@ -1599,11 +1599,11 @@ static int sdr_find_phase(int working, const u32 grp, u32 *work, *p = 0; ret = sdr_find_phase_delay(working, 0, grp, work, - IO_DELAY_PER_OPA_TAP, p); + iocfg->delay_per_opa_tap, p); if (!ret) return 0; - if (*p > IO_DQS_EN_PHASE_MAX) { + if (*p > iocfg->dqs_en_phase_max) { /* Fiddle with FIFO. */ rw_mgr_incr_vfifo(grp); if (!working) @@ -1627,8 +1627,8 @@ static int sdr_find_phase(int working, const u32 grp, u32 *work, static int sdr_working_phase(const u32 grp, u32 *work_bgn, u32 *d, u32 *p, u32 *i) { - const u32 dtaps_per_ptap = IO_DELAY_PER_OPA_TAP / - IO_DELAY_PER_DQS_EN_DCHAIN_TAP; + const u32 dtaps_per_ptap = iocfg->delay_per_opa_tap / + iocfg->delay_per_dqs_en_dchain_tap; int ret; *work_bgn = 0; @@ -1639,7 +1639,7 @@ static int sdr_working_phase(const u32 grp, u32 *work_bgn, u32 *d, ret = sdr_find_phase(1, grp, work_bgn, i, p); if (!ret) return 0; - *work_bgn += IO_DELAY_PER_DQS_EN_DCHAIN_TAP; + *work_bgn += iocfg->delay_per_dqs_en_dchain_tap; } /* Cannot find working solution */ @@ -1663,15 +1663,15 @@ static void sdr_backup_phase(const u32 grp, u32 *work_bgn, u32 *p) /* Special case code for backing up a phase */ if (*p == 0) { - *p = IO_DQS_EN_PHASE_MAX; + *p = iocfg->dqs_en_phase_max; rw_mgr_decr_vfifo(grp); } else { (*p)--; } - tmp_delay = *work_bgn - IO_DELAY_PER_OPA_TAP; + tmp_delay = *work_bgn - iocfg->delay_per_opa_tap; scc_mgr_set_dqs_en_phase_all_ranks(grp, *p); - for (d = 0; d <= IO_DQS_EN_DELAY_MAX && tmp_delay < *work_bgn; d++) { + for (d = 0; d <= iocfg->dqs_en_delay_max && tmp_delay < *work_bgn; d++) { scc_mgr_set_dqs_en_delay_all_ranks(grp, d); ret = rw_mgr_mem_calibrate_read_test_all_ranks(grp, 1, @@ -1681,12 +1681,12 @@ static void sdr_backup_phase(const u32 grp, u32 *work_bgn, u32 *p) break; } - tmp_delay += IO_DELAY_PER_DQS_EN_DCHAIN_TAP; + tmp_delay += iocfg->delay_per_dqs_en_dchain_tap; } /* Restore VFIFO to old state before we decremented it (if needed). */ (*p)++; - if (*p > IO_DQS_EN_PHASE_MAX) { + if (*p > iocfg->dqs_en_phase_max) { *p = 0; rw_mgr_incr_vfifo(grp); } @@ -1708,8 +1708,8 @@ static int sdr_nonworking_phase(const u32 grp, u32 *work_end, u32 *p, u32 *i) int ret; (*p)++; - *work_end += IO_DELAY_PER_OPA_TAP; - if (*p > IO_DQS_EN_PHASE_MAX) { + *work_end += iocfg->delay_per_opa_tap; + if (*p > iocfg->dqs_en_phase_max) { /* Fiddle with FIFO. */ *p = 0; rw_mgr_incr_vfifo(grp); @@ -1745,23 +1745,23 @@ static int sdr_find_window_center(const u32 grp, const u32 work_bgn, debug_cond(DLEVEL == 2, "work_bgn=%d work_end=%d work_mid=%d\n", work_bgn, work_end, work_mid); /* Get the middle delay to be less than a VFIFO delay */ - tmp_delay = (IO_DQS_EN_PHASE_MAX + 1) * IO_DELAY_PER_OPA_TAP; + tmp_delay = (iocfg->dqs_en_phase_max + 1) * iocfg->delay_per_opa_tap; debug_cond(DLEVEL == 2, "vfifo ptap delay %d\n", tmp_delay); work_mid %= tmp_delay; debug_cond(DLEVEL == 2, "new work_mid %d\n", work_mid); - tmp_delay = rounddown(work_mid, IO_DELAY_PER_OPA_TAP); - if (tmp_delay > IO_DQS_EN_PHASE_MAX * IO_DELAY_PER_OPA_TAP) - tmp_delay = IO_DQS_EN_PHASE_MAX * IO_DELAY_PER_OPA_TAP; - p = tmp_delay / IO_DELAY_PER_OPA_TAP; + tmp_delay = rounddown(work_mid, iocfg->delay_per_opa_tap); + if (tmp_delay > iocfg->dqs_en_phase_max * iocfg->delay_per_opa_tap) + tmp_delay = iocfg->dqs_en_phase_max * iocfg->delay_per_opa_tap; + p = tmp_delay / iocfg->delay_per_opa_tap; debug_cond(DLEVEL == 2, "new p %d, tmp_delay=%d\n", p, tmp_delay); - d = DIV_ROUND_UP(work_mid - tmp_delay, IO_DELAY_PER_DQS_EN_DCHAIN_TAP); - if (d > IO_DQS_EN_DELAY_MAX) - d = IO_DQS_EN_DELAY_MAX; - tmp_delay += d * IO_DELAY_PER_DQS_EN_DCHAIN_TAP; + d = DIV_ROUND_UP(work_mid - tmp_delay, iocfg->delay_per_dqs_en_dchain_tap); + if (d > iocfg->dqs_en_delay_max) + d = iocfg->dqs_en_delay_max; + tmp_delay += d * iocfg->delay_per_dqs_en_dchain_tap; debug_cond(DLEVEL == 2, "new d %d, tmp_delay=%d\n", d, tmp_delay); @@ -1814,7 +1814,7 @@ static int rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(const u32 grp) scc_mgr_set_dqs_en_phase_all_ranks(grp, 0); /* Step 0: Determine number of delay taps for each phase tap. */ - dtaps_per_ptap = IO_DELAY_PER_OPA_TAP / IO_DELAY_PER_DQS_EN_DCHAIN_TAP; + dtaps_per_ptap = iocfg->delay_per_opa_tap / iocfg->delay_per_dqs_en_dchain_tap; /* Step 1: First push vfifo until we get a failing read. */ find_vfifo_failing_read(grp); @@ -1851,13 +1851,13 @@ static int rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(const u32 grp) /* Special case code for backing up a phase */ if (p == 0) { - p = IO_DQS_EN_PHASE_MAX; + p = iocfg->dqs_en_phase_max; rw_mgr_decr_vfifo(grp); } else { p = p - 1; } - work_end -= IO_DELAY_PER_OPA_TAP; + work_end -= iocfg->delay_per_opa_tap; scc_mgr_set_dqs_en_phase_all_ranks(grp, p); d = 0; @@ -1868,11 +1868,11 @@ static int rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(const u32 grp) /* The dtap increment to find the failing edge is done here. */ sdr_find_phase_delay(0, 1, grp, &work_end, - IO_DELAY_PER_DQS_EN_DCHAIN_TAP, &d); + iocfg->delay_per_dqs_en_dchain_tap, &d); /* Go back to working dtap */ if (d != 0) - work_end -= IO_DELAY_PER_DQS_EN_DCHAIN_TAP; + work_end -= iocfg->delay_per_dqs_en_dchain_tap; debug_cond(DLEVEL == 2, "%s:%d p/d: ptap=%u dtap=%u end=%u\n", @@ -1898,7 +1898,7 @@ static int rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(const u32 grp) /* Special case code for backing up a phase */ if (p == 0) { - p = IO_DQS_EN_PHASE_MAX; + p = iocfg->dqs_en_phase_max; rw_mgr_decr_vfifo(grp); debug_cond(DLEVEL == 2, "%s:%d backedup cycle/phase: p=%u\n", __func__, __LINE__, p); @@ -1939,7 +1939,7 @@ static int rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(const u32 grp) /* * The dynamically calculated dtaps_per_ptap is only valid if we * found a passing/failing read. If we didn't, it means d hit the max - * (IO_DQS_EN_DELAY_MAX). Otherwise, dtaps_per_ptap retains its + * (iocfg->dqs_en_delay_max). Otherwise, dtaps_per_ptap retains its * statically calculated value. */ if (found_passing_read && found_failing_read) @@ -2028,8 +2028,8 @@ static void search_left_edge(const int write, const int rank_bgn, u32 *sticky_bit_chk, int *left_edge, int *right_edge, const u32 use_read_test) { - const u32 delay_max = write ? IO_IO_OUT1_DELAY_MAX : IO_IO_IN_DELAY_MAX; - const u32 dqs_max = write ? IO_IO_OUT1_DELAY_MAX : IO_DQS_IN_DELAY_MAX; + const u32 delay_max = write ? iocfg->io_out1_delay_max : iocfg->io_in_delay_max; + const u32 dqs_max = write ? iocfg->io_out1_delay_max : iocfg->dqs_in_delay_max; const u32 per_dqs = write ? rwcfg->mem_dq_per_write_dqs : rwcfg->mem_dq_per_read_dqs; u32 stop, bit_chk; @@ -2139,8 +2139,8 @@ static int search_right_edge(const int write, const int rank_bgn, u32 *sticky_bit_chk, int *left_edge, int *right_edge, const u32 use_read_test) { - const u32 delay_max = write ? IO_IO_OUT1_DELAY_MAX : IO_IO_IN_DELAY_MAX; - const u32 dqs_max = write ? IO_IO_OUT1_DELAY_MAX : IO_DQS_IN_DELAY_MAX; + const u32 delay_max = write ? iocfg->io_out1_delay_max : iocfg->io_in_delay_max; + const u32 dqs_max = write ? iocfg->io_out1_delay_max : iocfg->dqs_in_delay_max; const u32 per_dqs = write ? rwcfg->mem_dq_per_write_dqs : rwcfg->mem_dq_per_read_dqs; u32 stop, bit_chk; @@ -2152,10 +2152,10 @@ static int search_right_edge(const int write, const int rank_bgn, d + start_dqs); } else { /* READ-ONLY */ scc_mgr_set_dqs_bus_in_delay(read_group, d + start_dqs); - if (IO_SHIFT_DQS_EN_WHEN_SHIFT_DQS) { + if (iocfg->shift_dqs_en_when_shift_dqs) { uint32_t delay = d + start_dqs_en; - if (delay > IO_DQS_EN_DELAY_MAX) - delay = IO_DQS_EN_DELAY_MAX; + if (delay > iocfg->dqs_en_delay_max) + delay = iocfg->dqs_en_delay_max; scc_mgr_set_dqs_en_delay(read_group, delay); } scc_mgr_load_dqs(read_group); @@ -2307,7 +2307,7 @@ static void center_dq_windows(const int write, int *left_edge, int *right_edge, const int min_index, const int test_bgn, int *dq_margin, int *dqs_margin) { - const u32 delay_max = write ? IO_IO_OUT1_DELAY_MAX : IO_IO_IN_DELAY_MAX; + const u32 delay_max = write ? iocfg->io_out1_delay_max : iocfg->io_in_delay_max; const u32 per_dqs = write ? rwcfg->mem_dq_per_write_dqs : rwcfg->mem_dq_per_read_dqs; const u32 delay_off = write ? SCC_MGR_IO_OUT1_DELAY_OFFSET : @@ -2391,7 +2391,7 @@ static int rw_mgr_mem_calibrate_vfifo_center(const u32 rank_bgn, int32_t left_edge[rwcfg->mem_dq_per_read_dqs]; int32_t right_edge[rwcfg->mem_dq_per_read_dqs]; int32_t orig_mid_min, mid_min; - int32_t new_dqs, start_dqs, start_dqs_en, final_dqs_en; + int32_t new_dqs, start_dqs, start_dqs_en = 0, final_dqs_en; int32_t dq_margin, dqs_margin; int i, min_index; int ret; @@ -2399,15 +2399,15 @@ static int rw_mgr_mem_calibrate_vfifo_center(const u32 rank_bgn, debug("%s:%d: %u %u", __func__, __LINE__, rw_group, test_bgn); start_dqs = readl(addr); - if (IO_SHIFT_DQS_EN_WHEN_SHIFT_DQS) - start_dqs_en = readl(addr - IO_DQS_EN_DELAY_OFFSET); + if (iocfg->shift_dqs_en_when_shift_dqs) + start_dqs_en = readl(addr - iocfg->dqs_en_delay_offset); /* set the left and right edge of each bit to an illegal value */ - /* use (IO_IO_IN_DELAY_MAX + 1) as an illegal value */ + /* use (iocfg->io_in_delay_max + 1) as an illegal value */ sticky_bit_chk = 0; for (i = 0; i < rwcfg->mem_dq_per_read_dqs; i++) { - left_edge[i] = IO_IO_IN_DELAY_MAX + 1; - right_edge[i] = IO_IO_IN_DELAY_MAX + 1; + left_edge[i] = iocfg->io_in_delay_max + 1; + right_edge[i] = iocfg->io_in_delay_max + 1; } /* Search for the left edge of the window for each bit */ @@ -2428,7 +2428,7 @@ static int rw_mgr_mem_calibrate_vfifo_center(const u32 rank_bgn, * dqs/ck relationships. */ scc_mgr_set_dqs_bus_in_delay(rw_group, start_dqs); - if (IO_SHIFT_DQS_EN_WHEN_SHIFT_DQS) + if (iocfg->shift_dqs_en_when_shift_dqs) scc_mgr_set_dqs_en_delay(rw_group, start_dqs_en); scc_mgr_load_dqs(rw_group); @@ -2456,8 +2456,8 @@ static int rw_mgr_mem_calibrate_vfifo_center(const u32 rank_bgn, /* Determine the amount we can change DQS (which is -mid_min) */ orig_mid_min = mid_min; new_dqs = start_dqs - mid_min; - if (new_dqs > IO_DQS_IN_DELAY_MAX) - new_dqs = IO_DQS_IN_DELAY_MAX; + if (new_dqs > iocfg->dqs_in_delay_max) + new_dqs = iocfg->dqs_in_delay_max; else if (new_dqs < 0) new_dqs = 0; @@ -2465,9 +2465,9 @@ static int rw_mgr_mem_calibrate_vfifo_center(const u32 rank_bgn, debug_cond(DLEVEL == 1, "vfifo_center: new mid_min=%d new_dqs=%d\n", mid_min, new_dqs); - if (IO_SHIFT_DQS_EN_WHEN_SHIFT_DQS) { - if (start_dqs_en - mid_min > IO_DQS_EN_DELAY_MAX) - mid_min += start_dqs_en - mid_min - IO_DQS_EN_DELAY_MAX; + if (iocfg->shift_dqs_en_when_shift_dqs) { + if (start_dqs_en - mid_min > iocfg->dqs_en_delay_max) + mid_min += start_dqs_en - mid_min - iocfg->dqs_en_delay_max; else if (start_dqs_en - mid_min < 0) mid_min += start_dqs_en - mid_min; } @@ -2476,7 +2476,7 @@ static int rw_mgr_mem_calibrate_vfifo_center(const u32 rank_bgn, debug_cond(DLEVEL == 1, "vfifo_center: start_dqs=%d start_dqs_en=%d new_dqs=%d mid_min=%d\n", start_dqs, - IO_SHIFT_DQS_EN_WHEN_SHIFT_DQS ? start_dqs_en : -1, + iocfg->shift_dqs_en_when_shift_dqs ? start_dqs_en : -1, new_dqs, mid_min); /* Add delay to bring centre of all DQ windows to the same "level". */ @@ -2484,7 +2484,7 @@ static int rw_mgr_mem_calibrate_vfifo_center(const u32 rank_bgn, min_index, test_bgn, &dq_margin, &dqs_margin); /* Move DQS-en */ - if (IO_SHIFT_DQS_EN_WHEN_SHIFT_DQS) { + if (iocfg->shift_dqs_en_when_shift_dqs) { final_dqs_en = start_dqs_en - mid_min; scc_mgr_set_dqs_en_delay(rw_group, final_dqs_en); scc_mgr_load_dqs(rw_group); @@ -2568,7 +2568,7 @@ static int rw_mgr_mem_calibrate_dqs_enable_calibration(const u32 rw_group, */ /* We start at zero, so have one less dq to devide among */ - const u32 delay_step = IO_IO_IN_DELAY_MAX / + const u32 delay_step = iocfg->io_in_delay_max / (rwcfg->mem_dq_per_read_dqs - 1); int ret; u32 i, p, d, r; @@ -2687,8 +2687,8 @@ static int rw_mgr_mem_calibrate_vfifo(const u32 rw_group, const u32 test_bgn) failed_substage = CAL_SUBSTAGE_GUARANTEED_READ; /* USER Determine number of delay taps for each phase tap. */ - dtaps_per_ptap = DIV_ROUND_UP(IO_DELAY_PER_OPA_TAP, - IO_DELAY_PER_DQS_EN_DCHAIN_TAP) - 1; + dtaps_per_ptap = DIV_ROUND_UP(iocfg->delay_per_opa_tap, + iocfg->delay_per_dqs_en_dchain_tap) - 1; for (d = 0; d <= dtaps_per_ptap; d += 2) { /* @@ -2702,7 +2702,7 @@ static int rw_mgr_mem_calibrate_vfifo(const u32 rw_group, const u32 test_bgn) rw_group, d); } - for (p = 0; p <= IO_DQDQS_OUT_PHASE_MAX; p++) { + for (p = 0; p <= iocfg->dqdqs_out_phase_max; p++) { /* 1) Guaranteed Write */ ret = rw_mgr_mem_calibrate_guaranteed_write(rw_group, p); if (ret) @@ -2861,7 +2861,7 @@ static void search_window(const int search_dm, int *end_best, int *win_best, int new_dqs) { u32 bit_chk; - const int max = IO_IO_OUT1_DELAY_MAX - new_dqs; + const int max = iocfg->io_out1_delay_max - new_dqs; int d, di; /* Search for the/part of the window with DM/DQS shift. */ @@ -2892,7 +2892,7 @@ static void search_window(const int search_dm, * If a starting edge of our window has not been seen * this is our current start of the DM window. */ - if (*bgn_curr == IO_IO_OUT1_DELAY_MAX + 1) + if (*bgn_curr == iocfg->io_out1_delay_max + 1) *bgn_curr = search_dm ? -d : d; /* @@ -2906,8 +2906,8 @@ static void search_window(const int search_dm, } } else { /* We just saw a failing test. Reset temp edge. */ - *bgn_curr = IO_IO_OUT1_DELAY_MAX + 1; - *end_curr = IO_IO_OUT1_DELAY_MAX + 1; + *bgn_curr = iocfg->io_out1_delay_max + 1; + *end_curr = iocfg->io_out1_delay_max + 1; /* Early exit is only applicable to DQS. */ if (search_dm) @@ -2918,7 +2918,7 @@ static void search_window(const int search_dm, * chain space is less than already seen largest * window we can exit. */ - if (*win_best - 1 > IO_IO_OUT1_DELAY_MAX - new_dqs - d) + if (*win_best - 1 > iocfg->io_out1_delay_max - new_dqs - d) break; } } @@ -2946,10 +2946,10 @@ rw_mgr_mem_calibrate_writes_center(const u32 rank_bgn, const u32 write_group, int mid_min, orig_mid_min; int new_dqs, start_dqs; int dq_margin, dqs_margin, dm_margin; - int bgn_curr = IO_IO_OUT1_DELAY_MAX + 1; - int end_curr = IO_IO_OUT1_DELAY_MAX + 1; - int bgn_best = IO_IO_OUT1_DELAY_MAX + 1; - int end_best = IO_IO_OUT1_DELAY_MAX + 1; + int bgn_curr = iocfg->io_out1_delay_max + 1; + int end_curr = iocfg->io_out1_delay_max + 1; + int bgn_best = iocfg->io_out1_delay_max + 1; + int end_best = iocfg->io_out1_delay_max + 1; int win_best = 0; int ret; @@ -2966,12 +2966,12 @@ rw_mgr_mem_calibrate_writes_center(const u32 rank_bgn, const u32 write_group, /* * Set the left and right edge of each bit to an illegal value. - * Use (IO_IO_OUT1_DELAY_MAX + 1) as an illegal value. + * Use (iocfg->io_out1_delay_max + 1) as an illegal value. */ sticky_bit_chk = 0; for (i = 0; i < rwcfg->mem_dq_per_write_dqs; i++) { - left_edge[i] = IO_IO_OUT1_DELAY_MAX + 1; - right_edge[i] = IO_IO_OUT1_DELAY_MAX + 1; + left_edge[i] = iocfg->io_out1_delay_max + 1; + right_edge[i] = iocfg->io_out1_delay_max + 1; } /* Search for the left edge of the window for each bit. */ @@ -3013,10 +3013,10 @@ rw_mgr_mem_calibrate_writes_center(const u32 rank_bgn, const u32 write_group, /* * Set the left and right edge of each bit to an illegal value. - * Use (IO_IO_OUT1_DELAY_MAX + 1) as an illegal value. + * Use (iocfg->io_out1_delay_max + 1) as an illegal value. */ - left_edge[0] = IO_IO_OUT1_DELAY_MAX + 1; - right_edge[0] = IO_IO_OUT1_DELAY_MAX + 1; + left_edge[0] = iocfg->io_out1_delay_max + 1; + right_edge[0] = iocfg->io_out1_delay_max + 1; /* Search for the/part of the window with DM shift. */ search_window(1, rank_bgn, write_group, &bgn_curr, &end_curr, @@ -3031,8 +3031,8 @@ rw_mgr_mem_calibrate_writes_center(const u32 rank_bgn, const u32 write_group, * search begins as a new search. */ if (end_curr != 0) { - bgn_curr = IO_IO_OUT1_DELAY_MAX + 1; - end_curr = IO_IO_OUT1_DELAY_MAX + 1; + bgn_curr = iocfg->io_out1_delay_max + 1; + end_curr = iocfg->io_out1_delay_max + 1; } /* Search for the/part of the window with DQS shifts. */ @@ -3212,11 +3212,10 @@ static void mem_skip_calibrate(void) */ for (i = 0; i < rwcfg->mem_if_read_dqs_width; i++) { scc_mgr_set_dqs_en_phase(i, 0); -#if IO_DLL_CHAIN_LENGTH == 6 - scc_mgr_set_dqdqs_output_phase(i, 6); -#else - scc_mgr_set_dqdqs_output_phase(i, 7); -#endif + if (iocfg->dll_chain_length == 6) + scc_mgr_set_dqdqs_output_phase(i, 6); + else + scc_mgr_set_dqdqs_output_phase(i, 7); /* * Case:33398 * @@ -3235,15 +3234,15 @@ static void mem_skip_calibrate(void) * * Hence, to make DQS aligned to CK, we need to delay * DQS by: - * (720 - 90 - 180 - 2 * (360 / IO_DLL_CHAIN_LENGTH)) + * (720 - 90 - 180 - 2 * (360 / iocfg->dll_chain_length)) * - * Dividing the above by (360 / IO_DLL_CHAIN_LENGTH) + * Dividing the above by (360 / iocfg->dll_chain_length) * gives us the number of ptaps, which simplies to: * - * (1.25 * IO_DLL_CHAIN_LENGTH - 2) + * (1.25 * iocfg->dll_chain_length - 2) */ scc_mgr_set_dqdqs_output_phase(i, - 1.25 * IO_DLL_CHAIN_LENGTH - 2); + 1.25 * iocfg->dll_chain_length - 2); } writel(0xff, &sdr_scc_mgr->dqs_ena); writel(0xff, &sdr_scc_mgr->dqs_io_ena); @@ -3656,7 +3655,7 @@ static void initialize_tracking(void) * Compute usable version of value in case we skip full * computation later. */ - writel(DIV_ROUND_UP(IO_DELAY_PER_OPA_TAP, IO_DELAY_PER_DCHAIN_TAP) - 1, + writel(DIV_ROUND_UP(iocfg->delay_per_opa_tap, iocfg->delay_per_dchain_tap) - 1, &sdr_reg_file->dtaps_per_ptap); /* trk_sample_count */ @@ -3734,17 +3733,17 @@ int sdram_calibration_full(void) "dqs=%u,%u dq=%u dm=%u ptap_delay=%u dtap_delay=%u ", rwcfg->mem_if_read_dqs_width, rwcfg->mem_if_write_dqs_width, rwcfg->mem_data_width, rwcfg->mem_data_mask_width, - IO_DELAY_PER_OPA_TAP, IO_DELAY_PER_DCHAIN_TAP); + iocfg->delay_per_opa_tap, iocfg->delay_per_dchain_tap); debug_cond(DLEVEL == 1, "dtap_dqsen_delay=%u, dll=%u", - IO_DELAY_PER_DQS_EN_DCHAIN_TAP, IO_DLL_CHAIN_LENGTH); + iocfg->delay_per_dqs_en_dchain_tap, iocfg->dll_chain_length); debug_cond(DLEVEL == 1, "max values: en_p=%u dqdqs_p=%u en_d=%u dqs_in_d=%u ", - IO_DQS_EN_PHASE_MAX, IO_DQDQS_OUT_PHASE_MAX, - IO_DQS_EN_DELAY_MAX, IO_DQS_IN_DELAY_MAX); + iocfg->dqs_en_phase_max, iocfg->dqdqs_out_phase_max, + iocfg->dqs_en_delay_max, iocfg->dqs_in_delay_max); debug_cond(DLEVEL == 1, "io_in_d=%u io_out1_d=%u io_out2_d=%u ", - IO_IO_IN_DELAY_MAX, IO_IO_OUT1_DELAY_MAX, - IO_IO_OUT2_DELAY_MAX); + iocfg->io_in_delay_max, iocfg->io_out1_delay_max, + iocfg->io_out2_delay_max); debug_cond(DLEVEL == 1, "dqs_in_reserve=%u dqs_out_reserve=%u\n", - IO_DQS_IN_RESERVE, IO_DQS_OUT_RESERVE); + iocfg->dqs_in_reserve, iocfg->dqs_out_reserve); hc_initialize_rom_data();