From: J. German Rivera Date: Sat, 21 Mar 2015 02:28:18 +0000 (-0700) Subject: drivers/fsl-mc: Changed MC firmware loading for new boot architecture X-Git-Tag: v2015.07-rc1~67^2~12 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=125e2bc1f24736291e752d78a769f7f942050be2;p=oweals%2Fu-boot.git drivers/fsl-mc: Changed MC firmware loading for new boot architecture Changed MC firmware loading to comply with the new MC boot architecture. Flush D-cache hierarchy after loading MC images. Add environment variables "mcboottimeout" for MC boot timeout in milliseconds, "mcmemsize" for MC DRAM block size. Check MC boot status before calling flib functions. Signed-off-by: J. German Rivera Signed-off-by: York Sun --- diff --git a/arch/arm/cpu/armv8/fsl-lsch3/README b/arch/arm/cpu/armv8/fsl-lsch3/README index 99fc39a61f..f781620b30 100644 --- a/arch/arm/cpu/armv8/fsl-lsch3/README +++ b/arch/arm/cpu/armv8/fsl-lsch3/README @@ -33,3 +33,11 @@ is shown below considering a 32MB NOR flash device: ------------------------- ----> 0x0000_0000 32-MB NOR flash layout + +Environment Variables +===================== +mcboottimeout: MC boot timeout in milliseconds. If this variable is not defined + the value CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS will be assumed. + +mcmemsize: MC DRAM block size. If this variable is not defined, the value + CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE will be assumed. diff --git a/drivers/net/fsl-mc/mc.c b/drivers/net/fsl-mc/mc.c index 2a2b0af53e..c5c44bcab0 100644 --- a/drivers/net/fsl-mc/mc.c +++ b/drivers/net/fsl-mc/mc.c @@ -3,7 +3,6 @@ * * SPDX-License-Identifier: GPL-2.0+ */ - #include #include #include @@ -15,14 +14,64 @@ #include #include +#define MC_RAM_BASE_ADDR_ALIGNMENT (512UL * 1024 * 1024) +#define MC_RAM_BASE_ADDR_ALIGNMENT_MASK (~(MC_RAM_BASE_ADDR_ALIGNMENT - 1)) +#define MC_RAM_SIZE_ALIGNMENT (256UL * 1024 * 1024) + +#define MC_MEM_SIZE_ENV_VAR "mcmemsize" +#define MC_BOOT_TIMEOUT_ENV_VAR "mcboottimeout" + DECLARE_GLOBAL_DATA_PTR; static int mc_boot_status; struct fsl_mc_io *dflt_mc_io = NULL; uint16_t dflt_dprc_handle = 0; struct fsl_dpbp_obj *dflt_dpbp = NULL; struct fsl_dpio_obj *dflt_dpio = NULL; -uint16_t dflt_dpio_handle = NULL; +uint16_t dflt_dpio_handle = 0; + +#ifdef DEBUG +void dump_ram_words(const char *title, void *addr) +{ + int i; + uint32_t *words = addr; + + printf("Dumping beginning of %s (%p):\n", title, addr); + for (i = 0; i < 16; i++) + printf("%#x ", words[i]); + + printf("\n"); +} +void dump_mc_ccsr_regs(struct mc_ccsr_registers __iomem *mc_ccsr_regs) +{ + printf("MC CCSR registers:\n" + "reg_gcr1 %#x\n" + "reg_gsr %#x\n" + "reg_sicbalr %#x\n" + "reg_sicbahr %#x\n" + "reg_sicapr %#x\n" + "reg_mcfbalr %#x\n" + "reg_mcfbahr %#x\n" + "reg_mcfapr %#x\n" + "reg_psr %#x\n", + mc_ccsr_regs->reg_gcr1, + mc_ccsr_regs->reg_gsr, + mc_ccsr_regs->reg_sicbalr, + mc_ccsr_regs->reg_sicbahr, + mc_ccsr_regs->reg_sicapr, + mc_ccsr_regs->reg_mcfbalr, + mc_ccsr_regs->reg_mcfbahr, + mc_ccsr_regs->reg_mcfapr, + mc_ccsr_regs->reg_psr); +} +#else + +#define dump_ram_words(title, addr) +#define dump_mc_ccsr_regs(mc_ccsr_regs) + +#endif /* DEBUG */ + +#ifndef CONFIG_SYS_LS_MC_FW_IN_DDR /** * Copying MC firmware or DPL image to DDR */ @@ -31,6 +80,7 @@ static int mc_copy_image(const char *title, { debug("%s copied to address %p\n", title, (void *)mc_ram_addr); memcpy((void *)mc_ram_addr, (void *)image_addr, image_size); + flush_dcache_range(mc_ram_addr, mc_ram_addr + image_size); return 0; } @@ -92,22 +142,254 @@ int parse_mc_firmware_fit_image(const void **raw_image_addr, return 0; } +#endif + +/* + * Calculates the values to be used to specify the address range + * for the MC private DRAM block, in the MCFBALR/MCFBAHR registers. + * It returns the highest 512MB-aligned address within the given + * address range, in '*aligned_base_addr', and the number of 256 MiB + * blocks in it, in 'num_256mb_blocks'. + */ +static int calculate_mc_private_ram_params(u64 mc_private_ram_start_addr, + size_t mc_ram_size, + u64 *aligned_base_addr, + u8 *num_256mb_blocks) +{ + u64 addr; + u16 num_blocks; + + if (mc_ram_size % MC_RAM_SIZE_ALIGNMENT != 0) { + printf("fsl-mc: ERROR: invalid MC private RAM size (%lu)\n", + mc_ram_size); + return -EINVAL; + } + + num_blocks = mc_ram_size / MC_RAM_SIZE_ALIGNMENT; + if (num_blocks < 1 || num_blocks > 0xff) { + printf("fsl-mc: ERROR: invalid MC private RAM size (%lu)\n", + mc_ram_size); + return -EINVAL; + } + + addr = (mc_private_ram_start_addr + mc_ram_size - 1) & + MC_RAM_BASE_ADDR_ALIGNMENT_MASK; + + if (addr < mc_private_ram_start_addr) { + printf("fsl-mc: ERROR: bad start address %#llx\n", + mc_private_ram_start_addr); + return -EFAULT; + } + + *aligned_base_addr = addr; + *num_256mb_blocks = num_blocks; + return 0; +} + +static int load_mc_dpc(u64 mc_ram_addr, size_t mc_ram_size) +{ + u64 mc_dpc_offset; +#ifndef CONFIG_SYS_LS_MC_DPC_IN_DDR + int error; + void *dpc_fdt_hdr; + int dpc_size; +#endif + +#ifdef CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET + BUILD_BUG_ON((CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET & 0x3) != 0 || + CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET > 0xffffffff); + + mc_dpc_offset = CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET; +#else +#error "CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET not defined" +#endif + + /* + * Load the MC DPC blob in the MC private DRAM block: + */ +#ifdef CONFIG_SYS_LS_MC_DPC_IN_DDR + printf("MC DPC is preloaded to %#llx\n", mc_ram_addr + mc_dpc_offset); +#else + /* + * Get address and size of the DPC blob stored in flash: + */ +#ifdef CONFIG_SYS_LS_MC_DPC_IN_NOR + dpc_fdt_hdr = (void *)CONFIG_SYS_LS_MC_DPC_ADDR; +#else +#error "No CONFIG_SYS_LS_MC_DPC_IN_xxx defined" +#endif + + error = fdt_check_header(dpc_fdt_hdr); + if (error != 0) { + /* + * Don't return with error here, since the MC firmware can + * still boot without a DPC + */ + printf("fsl-mc: WARNING: No DPC image found\n"); + return 0; + } + + dpc_size = fdt_totalsize(dpc_fdt_hdr); + if (dpc_size > CONFIG_SYS_LS_MC_DPC_MAX_LENGTH) { + printf("fsl-mc: ERROR: Bad DPC image (too large: %d)\n", + dpc_size); + return -EINVAL; + } + + mc_copy_image("MC DPC blob", + (u64)dpc_fdt_hdr, dpc_size, mc_ram_addr + mc_dpc_offset); +#endif /* not defined CONFIG_SYS_LS_MC_DPC_IN_DDR */ + + dump_ram_words("DPC", (void *)(mc_ram_addr + mc_dpc_offset)); + return 0; +} + +static int load_mc_dpl(u64 mc_ram_addr, size_t mc_ram_size) +{ + u64 mc_dpl_offset; +#ifndef CONFIG_SYS_LS_MC_DPL_IN_DDR + int error; + void *dpl_fdt_hdr; + int dpl_size; +#endif + +#ifdef CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET + BUILD_BUG_ON((CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET & 0x3) != 0 || + CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET > 0xffffffff); + + mc_dpl_offset = CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET; +#else +#error "CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET not defined" +#endif + + /* + * Load the MC DPL blob in the MC private DRAM block: + */ +#ifdef CONFIG_SYS_LS_MC_DPL_IN_DDR + printf("MC DPL is preloaded to %#llx\n", mc_ram_addr + mc_dpl_offset); +#else + /* + * Get address and size of the DPL blob stored in flash: + */ +#ifdef CONFIG_SYS_LS_MC_DPL_IN_NOR + dpl_fdt_hdr = (void *)CONFIG_SYS_LS_MC_DPL_ADDR; +#else +#error "No CONFIG_SYS_LS_MC_DPL_IN_xxx defined" +#endif + + error = fdt_check_header(dpl_fdt_hdr); + if (error != 0) { + printf("fsl-mc: ERROR: Bad DPL image (bad header)\n"); + return error; + } + + dpl_size = fdt_totalsize(dpl_fdt_hdr); + if (dpl_size > CONFIG_SYS_LS_MC_DPL_MAX_LENGTH) { + printf("fsl-mc: ERROR: Bad DPL image (too large: %d)\n", + dpl_size); + return -EINVAL; + } + + mc_copy_image("MC DPL blob", + (u64)dpl_fdt_hdr, dpl_size, mc_ram_addr + mc_dpl_offset); +#endif /* not defined CONFIG_SYS_LS_MC_DPL_IN_DDR */ + + dump_ram_words("DPL", (void *)(mc_ram_addr + mc_dpl_offset)); + return 0; +} + +/** + * Return the MC boot timeout value in milliseconds + */ +static unsigned long get_mc_boot_timeout_ms(void) +{ + unsigned long timeout_ms = CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS; + + char *timeout_ms_env_var = getenv(MC_BOOT_TIMEOUT_ENV_VAR); + + if (timeout_ms_env_var) { + timeout_ms = simple_strtoul(timeout_ms_env_var, NULL, 10); + if (timeout_ms == 0) { + printf("fsl-mc: WARNING: Invalid value for \'" + MC_BOOT_TIMEOUT_ENV_VAR + "\' environment variable: %lu\n", + timeout_ms); + + timeout_ms = CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS; + } + } + + return timeout_ms; +} + +static int wait_for_mc(bool booting_mc, u32 *final_reg_gsr) +{ + u32 reg_gsr; + u32 mc_fw_boot_status; + unsigned long timeout_ms = get_mc_boot_timeout_ms(); + struct mc_ccsr_registers __iomem *mc_ccsr_regs = MC_CCSR_BASE_ADDR; + + dmb(); + debug("Polling mc_ccsr_regs->reg_gsr ...\n"); + assert(timeout_ms > 0); + for (;;) { + udelay(1000); /* throttle polling */ + reg_gsr = in_le32(&mc_ccsr_regs->reg_gsr); + mc_fw_boot_status = (reg_gsr & GSR_FS_MASK); + if (mc_fw_boot_status & 0x1) + break; + + timeout_ms--; + if (timeout_ms == 0) + break; + } + + if (timeout_ms == 0) { + if (booting_mc) + printf("fsl-mc: timeout booting management complex firmware\n"); + else + printf("fsl-mc: timeout deploying data path layout\n"); + + /* TODO: Get an error status from an MC CCSR register */ + return -ETIMEDOUT; + } + + if (mc_fw_boot_status != 0x1) { + /* + * TODO: Identify critical errors from the GSR register's FS + * field and for those errors, set error to -ENODEV or other + * appropriate errno, so that the status property is set to + * failure in the fsl,dprc device tree node. + */ + if (booting_mc) { + printf("fsl-mc: WARNING: Firmware booted with error (GSR: %#x)\n", + reg_gsr); + } else { + printf("fsl-mc: WARNING: Data path layout deployed with error (GSR: %#x)\n", + reg_gsr); + } + } + + *final_reg_gsr = reg_gsr; + return 0; +} int mc_init(void) { int error = 0; - int timeout = 200000; int portal_id = 0; struct mc_ccsr_registers __iomem *mc_ccsr_regs = MC_CCSR_BASE_ADDR; u64 mc_ram_addr; - u64 mc_dpl_offset; u32 reg_gsr; - u32 mc_fw_boot_status; - void *dpl_fdt_hdr; - int dpl_size; + u32 reg_mcfbalr; +#ifndef CONFIG_SYS_LS_MC_FW_IN_DDR const void *raw_image_addr; size_t raw_image_size = 0; +#endif struct mc_version mc_ver_info; + u64 mc_ram_aligned_base_addr; + u8 mc_ram_num_256mb_blocks; + size_t mc_ram_size = mc_get_dram_block_size(); /* * The MC private DRAM block was already carved at the end of DRAM @@ -122,8 +404,19 @@ int mc_init(void) } #ifdef CONFIG_FSL_DEBUG_SERVER + /* + * FIXME: I don't think this is right. See get_dram_size_to_hide() + */ mc_ram_addr -= debug_server_get_dram_block_size(); #endif + + error = calculate_mc_private_ram_params(mc_ram_addr, + mc_ram_size, + &mc_ram_aligned_base_addr, + &mc_ram_num_256mb_blocks); + if (error != 0) + goto out; + /* * Management Complex cores should be held at reset out of POR. * U-boot should be the first software to touch MC. To be safe, @@ -139,6 +432,9 @@ int mc_init(void) out_le32(&mc_ccsr_regs->reg_gcr1, 0); dmb(); +#ifdef CONFIG_SYS_LS_MC_FW_IN_DDR + printf("MC firmware is preloaded to %#llx\n", mc_ram_addr); +#else error = parse_mc_firmware_fit_image(&raw_image_addr, &raw_image_size); if (error != 0) goto out; @@ -147,83 +443,34 @@ int mc_init(void) */ mc_copy_image("MC Firmware", (u64)raw_image_addr, raw_image_size, mc_ram_addr); - - /* - * Get address and size of the DPL blob stored in flash: - */ -#ifdef CONFIG_SYS_LS_MC_DPL_IN_NOR - dpl_fdt_hdr = (void *)CONFIG_SYS_LS_MC_DPL_ADDR; -#else -#error "No CONFIG_SYS_LS_MC_DPL_IN_xxx defined" #endif + dump_ram_words("firmware", (void *)mc_ram_addr); - error = fdt_check_header(dpl_fdt_hdr); - if (error != 0) { - printf("fsl-mc: ERROR: Bad DPL image (bad header)\n"); - goto out; - } - - dpl_size = fdt_totalsize(dpl_fdt_hdr); - if (dpl_size > CONFIG_SYS_LS_MC_DPL_MAX_LENGTH) { - printf("fsl-mc: ERROR: Bad DPL image (too large: %d)\n", - dpl_size); - error = -EINVAL; + error = load_mc_dpc(mc_ram_addr, mc_ram_size); + if (error != 0) goto out; - } - /* - * Calculate offset in the MC private DRAM block at which the MC DPL - * blob is to be placed: - */ -#ifdef CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET - BUILD_BUG_ON((CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET & 0x3) != 0 || - CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET > 0xffffffff); - - mc_dpl_offset = CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET; -#else - mc_dpl_offset = mc_get_dram_block_size() - - roundup(CONFIG_SYS_LS_MC_DPL_MAX_LENGTH, 4096); - - if ((mc_dpl_offset & 0x3) != 0 || mc_dpl_offset > 0xffffffff) { - printf("%s: Invalid MC DPL offset: %llu\n", - __func__, mc_dpl_offset); - error = -EINVAL; + error = load_mc_dpl(mc_ram_addr, mc_ram_size); + if (error != 0) goto out; - } -#endif - - /* - * Load the MC DPL blob at the far end of the MC private DRAM block: - * - * TODO: Should we place the DPL at a different location to match - * assumptions of MC firmware about its memory layout? - */ - mc_copy_image("MC DPL blob", - (u64)dpl_fdt_hdr, dpl_size, mc_ram_addr + mc_dpl_offset); debug("mc_ccsr_regs %p\n", mc_ccsr_regs); + dump_mc_ccsr_regs(mc_ccsr_regs); /* - * Tell MC where the MC Firmware image was loaded in DDR: + * Tell MC what is the address range of the DRAM block assigned to it: */ - out_le32(&mc_ccsr_regs->reg_mcfbalr, (u32)mc_ram_addr); - out_le32(&mc_ccsr_regs->reg_mcfbahr, (u32)((u64)mc_ram_addr >> 32)); + reg_mcfbalr = (u32)mc_ram_aligned_base_addr | + (mc_ram_num_256mb_blocks - 1); + out_le32(&mc_ccsr_regs->reg_mcfbalr, reg_mcfbalr); + out_le32(&mc_ccsr_regs->reg_mcfbahr, + (u32)(mc_ram_aligned_base_addr >> 32)); out_le32(&mc_ccsr_regs->reg_mcfapr, MCFAPR_BYPASS_ICID_MASK); /* - * Tell MC where the DPL blob was loaded in DDR, by indicating - * its offset relative to the beginning of the DDR block - * allocated to the MC firmware. The MC firmware is responsible - * for checking that there is no overlap between the DPL blob - * and the runtime heap and stack of the MC firmware itself. - * - * NOTE: bits [31:2] of this offset need to be stored in bits [29:0] of - * the GSR MC CCSR register. So, this offset is assumed to be 4-byte - * aligned. - * Care must be taken not to write 1s into bits 31 and 30 of the GSR in - * this case as the SoC COP or PIC will be signaled. + * Tell the MC that we want delayed DPL deployment. */ - out_le32(&mc_ccsr_regs->reg_gsr, (u32)(mc_dpl_offset >> 2)); + out_le32(&mc_ccsr_regs->reg_gsr, 0xDD00); printf("\nfsl-mc: Booting Management Complex ...\n"); @@ -231,38 +478,9 @@ int mc_init(void) * Deassert reset and release MC core 0 to run */ out_le32(&mc_ccsr_regs->reg_gcr1, GCR1_P1_DE_RST | GCR1_M_ALL_DE_RST); - dmb(); - debug("Polling mc_ccsr_regs->reg_gsr ...\n"); - - for (;;) { - reg_gsr = in_le32(&mc_ccsr_regs->reg_gsr); - mc_fw_boot_status = (reg_gsr & GSR_FS_MASK); - if (mc_fw_boot_status & 0x1) - break; - - udelay(1000); /* throttle polling */ - if (timeout-- <= 0) - break; - } - - if (timeout <= 0) { - printf("fsl-mc: timeout booting management complex firmware\n"); - - /* TODO: Get an error status from an MC CCSR register */ - error = -ETIMEDOUT; + error = wait_for_mc(true, ®_gsr); + if (error != 0) goto out; - } - - if (mc_fw_boot_status != 0x1) { - /* - * TODO: Identify critical errors from the GSR register's FS - * field and for those errors, set error to -ENODEV or other - * appropriate errno, so that the status property is set to - * failure in the fsl,dprc device tree node. - */ - printf("fsl-mc: WARNING: Firmware booted with error (GSR: %#x)\n", - reg_gsr); - } /* * TODO: need to obtain the portal_id for the root container from the @@ -301,7 +519,16 @@ int mc_init(void) printf("fsl-mc: Management Complex booted (version: %d.%d.%d, boot status: %#x)\n", mc_ver_info.major, mc_ver_info.minor, mc_ver_info.revision, - mc_fw_boot_status); + reg_gsr & GSR_FS_MASK); + + /* + * Tell the MC to deploy the DPL: + */ + out_le32(&mc_ccsr_regs->reg_gsr, 0x0); + printf("\nfsl-mc: Deploying data path layout ...\n"); + error = wait_for_mc(false, ®_gsr); + if (error != 0) + goto out; out: if (error != 0) mc_boot_status = -error; @@ -318,14 +545,28 @@ int get_mc_boot_status(void) /** * Return the actual size of the MC private DRAM block. - * - * NOTE: For now this function always returns the minimum required size, - * However, in the future, the actual size may be obtained from an environment - * variable. */ unsigned long mc_get_dram_block_size(void) { - return CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE; + unsigned long dram_block_size = CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE; + + char *dram_block_size_env_var = getenv(MC_MEM_SIZE_ENV_VAR); + + if (dram_block_size_env_var) { + dram_block_size = simple_strtoul(dram_block_size_env_var, NULL, + 10); + + if (dram_block_size < CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE) { + printf("fsl-mc: WARNING: Invalid value for \'" + MC_MEM_SIZE_ENV_VAR + "\' environment variable: %lu\n", + dram_block_size); + + dram_block_size = CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE; + } + } + + return dram_block_size; } int dpio_init(struct dprc_obj_desc obj_desc) @@ -464,6 +705,8 @@ int fsl_mc_ldpaa_init(bd_t *bis) int num_child_objects = 0; error = mc_init(); + if (error < 0) + goto error; error = dprc_get_container_id(dflt_mc_io, &container_id); if (error < 0) { @@ -517,24 +760,27 @@ void fsl_mc_ldpaa_exit(bd_t *bis) { int err; + if (get_mc_boot_status() == 0) { + err = dpio_disable(dflt_mc_io, dflt_dpio_handle); + if (err < 0) { + printf("dpio_disable() failed: %d\n", err); + return; + } + err = dpio_reset(dflt_mc_io, dflt_dpio_handle); + if (err < 0) { + printf("dpio_reset() failed: %d\n", err); + return; + } + err = dpio_close(dflt_mc_io, dflt_dpio_handle); + if (err < 0) { + printf("dpio_close() failed: %d\n", err); + return; + } - err = dpio_disable(dflt_mc_io, dflt_dpio_handle); - if (err < 0) { - printf("dpio_disable() failed: %d\n", err); - return; - } - err = dpio_reset(dflt_mc_io, dflt_dpio_handle); - if (err < 0) { - printf("dpio_reset() failed: %d\n", err); - return; - } - err = dpio_close(dflt_mc_io, dflt_dpio_handle); - if (err < 0) { - printf("dpio_close() failed: %d\n", err); - return; + free(dflt_dpio); + free(dflt_dpbp); } - free(dflt_dpio); - free(dflt_dpbp); - free(dflt_mc_io); + if (dflt_mc_io) + free(dflt_mc_io); } diff --git a/include/configs/ls2085a_common.h b/include/configs/ls2085a_common.h index 5ce5e1c9cb..4b68106ce4 100644 --- a/include/configs/ls2085a_common.h +++ b/include/configs/ls2085a_common.h @@ -138,8 +138,10 @@ #define CONFIG_FSL_MC_ENET #define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (512UL * 1024 * 1024) /* TODO Actual DPL max length needs to be confirmed with the MC FW team */ -#define CONFIG_SYS_LS_MC_DPL_MAX_LENGTH (256 * 1024) -#define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET 0xe00000 +#define CONFIG_SYS_LS_MC_DPC_MAX_LENGTH 0x20000 +#define CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET 0x00F00000 +#define CONFIG_SYS_LS_MC_DPL_MAX_LENGTH 0x20000 +#define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET 0x00F20000 /* Carve out a DDR region which will not be used by u-boot/Linux */ #if defined(CONFIG_FSL_MC_ENET) || defined(CONFIG_FSL_DEBUG_SERVER) diff --git a/include/configs/ls2085a_emu.h b/include/configs/ls2085a_emu.h index 961dc63c8f..2d68e1bf7e 100644 --- a/include/configs/ls2085a_emu.h +++ b/include/configs/ls2085a_emu.h @@ -72,12 +72,15 @@ #define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR #define CONFIG_SYS_DEBUG_SERVER_FW_ADDR 0x580C00000ULL -/* MC firmware */ -#define CONFIG_SYS_LS_MC_FW_IN_NOR -#define CONFIG_SYS_LS_MC_FW_ADDR 0x580200000ULL +/* + * This trick allows users to load MC images into DDR directly without + * copying from NOR flash. It dramatically improves speed. + */ +#define CONFIG_SYS_LS_MC_FW_IN_DDR +#define CONFIG_SYS_LS_MC_DPL_IN_DDR +#define CONFIG_SYS_LS_MC_DPC_IN_DDR -#define CONFIG_SYS_LS_MC_DPL_IN_NOR -#define CONFIG_SYS_LS_MC_DPL_ADDR 0x5806C0000ULL +#define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 200000 /* Store environment at top of flash */ #define CONFIG_ENV_IS_NOWHERE 1 diff --git a/include/configs/ls2085a_simu.h b/include/configs/ls2085a_simu.h index e669d8d33e..d0d2eedb6d 100644 --- a/include/configs/ls2085a_simu.h +++ b/include/configs/ls2085a_simu.h @@ -138,6 +138,11 @@ #define CONFIG_SYS_LS_MC_DPL_IN_NOR #define CONFIG_SYS_LS_MC_DPL_ADDR 0x5806C0000ULL +#define CONFIG_SYS_LS_MC_DPC_IN_NOR +#define CONFIG_SYS_LS_MC_DPC_ADDR 0x5806F8000ULL + +#define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 200000 + /* Store environment at top of flash */ #define CONFIG_ENV_IS_NOWHERE 1 #define CONFIG_ENV_SIZE 0x1000