From: Matthias Fuchs Date: Wed, 8 Jul 2009 11:43:55 +0000 (+0200) Subject: ppc4xx: Move 405EP pci code from cpu_init_f() to __pci_pre_init() X-Git-Tag: v2009.08-rc1~110^2~3^2^2~1 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=123f102ec093fba6967066acdf9beb637df2e2d1;p=oweals%2Fu-boot.git ppc4xx: Move 405EP pci code from cpu_init_f() to __pci_pre_init() This patch moves some basic PCI initialisation from the 4xx cpu_init_f() to cpu/ppc4xx/4xx_pci.c. The original cpu_init_f() function enabled the 405EP's internal arbiter in all situations. Also the HCE bit in cpc0_pci is always set. The first is not really wanted for PCI adapter designs and the latter is a general bug for PCI adapter U-Boots. Because it enables PCI configuration by the system CPU even when the PCI configuration has not been setup by the 405EP. The one and only correct place is in pci_405gp_init() (see "Set HCE bit" comment). So for compatibility reasons the arbiter is still enabled in any case, but from weak pci_pre_init() so that it can be replaced by board specific code. Signed-off-by: Matthias Fuchs Signed-off-by: Stefan Roese --- diff --git a/cpu/ppc4xx/4xx_pci.c b/cpu/ppc4xx/4xx_pci.c index 31ca85dc55..33dd743aec 100644 --- a/cpu/ppc4xx/4xx_pci.c +++ b/cpu/ppc4xx/4xx_pci.c @@ -87,6 +87,20 @@ DECLARE_GLOBAL_DATA_PTR; */ int __pci_pre_init(struct pci_controller *hose) { +#if defined (CONFIG_405EP) + /* + * Enable the internal PCI arbiter by default. + * + * On 405EP CPUs the internal arbiter can be controlled + * by the I2C strapping EEPROM. If you want to do so + * or if you want to disable the arbiter pci_pre_init() + * must be reimplemented without enabling the arbiter. + * The arbiter is enabled in this place because of + * compatibility reasons. + */ + mtdcr(cpc0_pci, mfdcr(cpc0_pci) | CPC0_PCI_ARBIT_EN); +#endif /* CONFIG_405EP */ + return 1; } int pci_pre_init(struct pci_controller *hose) __attribute__((weak, alias("__pci_pre_init"))); diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c index 577d33fead..bbd795de2a 100644 --- a/cpu/ppc4xx/cpu_init.c +++ b/cpu/ppc4xx/cpu_init.c @@ -174,11 +174,6 @@ cpu_init_f (void) * Set EMAC noise filter bits */ mtdcr(cpc0_epctl, CPC0_EPRCSR_E0NFE | CPC0_EPRCSR_E1NFE); - - /* - * Enable the internal PCI arbiter - */ - mtdcr(cpc0_pci, mfdcr(cpc0_pci) | CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN); #endif /* CONFIG_405EP */ #if defined(CONFIG_SYS_4xx_GPIO_TABLE)