From: Marek Vasut Date: Mon, 3 Dec 2018 19:45:22 +0000 (+0100) Subject: ARM: dts: rmobile: Extract AVB node extras on V3M Eagle X-Git-Tag: v2019.01-rc2~32^2~13 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=1172ade967ee594a8075f2d80083a2b04329da29;p=oweals%2Fu-boot.git ARM: dts: rmobile: Extract AVB node extras on V3M Eagle The AVB node is not complete in Linux 4.17 DTs on V3M Eagle, pull the AVB node extras into U-Boot specific DT until they hit mainline Linux, to make syncing of DTs easier. Signed-off-by: Marek Vasut Cc: Nobuhiro Iwamatsu --- V2: Rebase on u-boot/master --- diff --git a/arch/arm/dts/r8a77970-eagle-u-boot.dts b/arch/arm/dts/r8a77970-eagle-u-boot.dts index 0c716deb6f..5b17f1d1f0 100644 --- a/arch/arm/dts/r8a77970-eagle-u-boot.dts +++ b/arch/arm/dts/r8a77970-eagle-u-boot.dts @@ -7,6 +7,7 @@ #include "r8a77970-eagle.dts" #include "r8a77970-u-boot.dtsi" +#include / { aliases { @@ -14,6 +15,25 @@ }; }; +&avb { + pinctrl-0 = <&avb0_pins>; + pinctrl-names = "default"; + +}; + +&phy0 { + reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; +}; + +&pfc { + avb0_pins: avb { + mux { + groups = "avb0_link", "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk"; + function = "avb0"; + }; + }; +}; + &rpc { num-cs = <1>; status = "okay"; diff --git a/arch/arm/dts/r8a77970-eagle.dts b/arch/arm/dts/r8a77970-eagle.dts index 107ac5d393..7fee1aa1ac 100644 --- a/arch/arm/dts/r8a77970-eagle.dts +++ b/arch/arm/dts/r8a77970-eagle.dts @@ -8,7 +8,6 @@ /dts-v1/; #include "r8a77970.dtsi" -#include / { model = "Renesas Eagle board based on r8a77970"; @@ -32,8 +31,6 @@ }; &avb { - pinctrl-0 = <&avb0_pins>; - pinctrl-names = "default"; renesas,no-ether-link; phy-handle = <&phy0>; phy-mode = "rgmii-id"; @@ -44,7 +41,6 @@ reg = <0>; interrupt-parent = <&gpio1>; interrupts = <17 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; }; }; @@ -72,13 +68,6 @@ }; &pfc { - avb0_pins: avb { - mux { - groups = "avb0_link", "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk"; - function = "avb0"; - }; - }; - i2c0_pins: i2c0 { groups = "i2c0"; function = "i2c0";