From: Lokesh Vutla <lokeshvutla@ti.com>
Date: Fri, 29 Dec 2017 06:17:53 +0000 (+0530)
Subject: board: ti: am574x-idk: Add hw data support
X-Git-Tag: v2018.03-rc1~150
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=10f430f3f10652fe73794e84c67351b530c8460d;p=oweals%2Fu-boot.git

board: ti: am574x-idk: Add hw data support

Update prcm, voltages and pinmux support for am574x-idk.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---

diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 9624fb81fa..5710136e88 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -597,6 +597,7 @@ extern struct prcm_regs const dra7xx_prcm;
 extern struct dplls const **dplls_data;
 extern struct dplls dra7xx_dplls;
 extern struct dplls dra72x_dplls;
+extern struct dplls dra76x_dplls;
 extern struct vcores_data const **omap_vcores;
 extern const u32 sys_clk_array[8];
 extern struct omap_sys_ctrl_regs const **ctrl;
diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
index 082346d2b1..2d14ae54fe 100644
--- a/board/ti/am57xx/board.c
+++ b/board/ti/am57xx/board.c
@@ -535,7 +535,7 @@ invalid_eeprom:
 
 void vcores_init(void)
 {
-	if (board_is_am572x_idk())
+	if (board_is_am572x_idk() || board_is_am574x_idk())
 		*omap_vcores = &am572x_idk_volts;
 	else if (board_is_am571x_idk())
 		*omap_vcores = &am571x_idk_volts;
@@ -548,6 +548,8 @@ void hw_data_init(void)
 	*prcm = &dra7xx_prcm;
 	if (is_dra72x())
 		*dplls_data = &dra72x_dplls;
+	else if (is_dra76x())
+		*dplls_data = &dra76x_dplls;
 	else
 		*dplls_data = &dra7xx_dplls;
 	*ctrl = &dra7xx_ctrl;
@@ -688,7 +690,7 @@ void recalibrate_iodelay(void)
 	int pconf_sz, iod_sz, delta_iod_sz = 0;
 	int ret;
 
-	if (board_is_am572x_idk()) {
+	if (board_is_am572x_idk() || board_is_am574x_idk()) {
 		pconf = core_padconf_array_essential_am572x_idk;
 		pconf_sz = ARRAY_SIZE(core_padconf_array_essential_am572x_idk);
 		iod = iodelay_cfg_array_am572x_idk;
@@ -995,7 +997,8 @@ int board_eth_init(bd_t *bis)
 	writel(ctrl_val, (*ctrl)->control_core_control_io1);
 
 	/* The phy address for the AM57xx IDK are different than x15 */
-	if (board_is_am572x_idk() || board_is_am571x_idk()) {
+	if (board_is_am572x_idk() || board_is_am571x_idk() ||
+	    board_is_am574x_idk()) {
 		cpsw_data.slave_data[0].phy_addr = 0;
 		cpsw_data.slave_data[1].phy_addr = 1;
 	}