From: Wenyou Yang Date: Thu, 23 Mar 2017 04:55:21 +0000 (+0800) Subject: mtd: nand: atmel: use another functions to set gpio value X-Git-Tag: v2017.05-rc2~8^2~20 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=0de077df38a6a1120acf7833572d1ffc8f209f33;p=oweals%2Fu-boot.git mtd: nand: atmel: use another functions to set gpio value Because there isn't the implementation of gpio_set/get_value() and gpio_set/get_value() after the at91 gpio driver is converted to support the driver model, use at91_set_gpio_value() and at91_get_gpio_value() Signed-off-by: Wenyou Yang Reviewed-by: Simon Glass --- diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 8669432deb..21d5d0e70d 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -1222,7 +1222,8 @@ static void at91_nand_hwcontrol(struct mtd_info *mtd, IO_ADDR_W |= CONFIG_SYS_NAND_MASK_ALE; #ifdef CONFIG_SYS_NAND_ENABLE_PIN - gpio_set_value(CONFIG_SYS_NAND_ENABLE_PIN, !(ctrl & NAND_NCE)); + at91_set_gpio_value(CONFIG_SYS_NAND_ENABLE_PIN, + !(ctrl & NAND_NCE)); #endif this->IO_ADDR_W = (void *) IO_ADDR_W; } @@ -1234,7 +1235,7 @@ static void at91_nand_hwcontrol(struct mtd_info *mtd, #ifdef CONFIG_SYS_NAND_READY_PIN static int at91_nand_ready(struct mtd_info *mtd) { - return gpio_get_value(CONFIG_SYS_NAND_READY_PIN); + return at91_get_gpio_value(CONFIG_SYS_NAND_READY_PIN); } #endif