From: Felix Fietkau Date: Sat, 23 Jun 2012 17:30:40 +0000 (+0000) Subject: ath9k: merge a patch for improving ad-hoc mode performance X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=0b88abd58d5ed6d08739c5e436883e0411991959;p=librecmc%2Flibrecmc.git ath9k: merge a patch for improving ad-hoc mode performance SVN-Revision: 32491 --- diff --git a/package/mac80211/patches/300-pending_work.patch b/package/mac80211/patches/300-pending_work.patch index 4f96a013f4..3f45286e9d 100644 --- a/package/mac80211/patches/300-pending_work.patch +++ b/package/mac80211/patches/300-pending_work.patch @@ -1171,7 +1171,34 @@ #ifdef CONFIG_ATH9K_BTCOEX_SUPPORT --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c -@@ -516,24 +516,6 @@ irqreturn_t ath_isr(int irq, void *dev) +@@ -19,7 +19,7 @@ + #include "ath9k.h" + #include "btcoex.h" + +-static u8 parse_mpdudensity(u8 mpdudensity) ++u8 ath9k_parse_mpdudensity(u8 mpdudensity) + { + /* + * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing": +@@ -320,6 +320,7 @@ static void ath_node_attach(struct ath_s + struct ieee80211_vif *vif) + { + struct ath_node *an; ++ u8 density; + an = (struct ath_node *)sta->drv_priv; + + #ifdef CONFIG_ATH9K_DEBUGFS +@@ -334,7 +335,8 @@ static void ath_node_attach(struct ath_s + ath_tx_node_init(sc, an); + an->maxampdu = 1 << (IEEE80211_HT_MAX_AMPDU_FACTOR + + sta->ht_cap.ampdu_factor); +- an->mpdudensity = parse_mpdudensity(sta->ht_cap.ampdu_density); ++ density = ath9k_parse_mpdudensity(sta->ht_cap.ampdu_density); ++ an->mpdudensity = density; + } + } + +@@ -516,24 +518,6 @@ irqreturn_t ath_isr(int irq, void *dev) ath9k_hw_set_interrupts(ah); } @@ -1196,7 +1223,7 @@ if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP)) if (status & ATH9K_INT_TIM_TIMER) { if (ATH_DBG_WARN_ON_ONCE(sc->ps_idle)) -@@ -959,14 +941,10 @@ static void ath9k_calculate_summary_stat +@@ -959,14 +943,10 @@ static void ath9k_calculate_summary_stat /* * Enable MIB interrupts when there are hardware phy counters. */ @@ -1466,6 +1493,14 @@ }; struct ath_buf_state { +@@ -721,6 +722,7 @@ extern int ath9k_modparam_nohwcrypt; + extern int led_blink; + extern bool is_ath9k_unloaded; + ++u8 ath9k_parse_mpdudensity(u8 mpdudensity); + irqreturn_t ath_isr(int irq, void *dev); + int ath9k_init_device(u16 devid, struct ath_softc *sc, + const struct ath_bus_ops *bus_ops); --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -938,6 +938,7 @@ static void ath_buf_set_rate(struct ath_ @@ -1511,7 +1546,33 @@ info->rates[i].Rate = rate->hw_value; if (rate->hw_value_short) { if (rates[i].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) -@@ -1776,10 +1766,22 @@ static void setup_frame_info(struct ieee +@@ -1175,6 +1165,7 @@ int ath_tx_aggr_start(struct ath_softc * + { + struct ath_atx_tid *txtid; + struct ath_node *an; ++ u8 density; + + an = (struct ath_node *)sta->drv_priv; + txtid = ATH_AN_2_TID(an, tid); +@@ -1182,6 +1173,17 @@ int ath_tx_aggr_start(struct ath_softc * + if (txtid->state & (AGGR_CLEANUP | AGGR_ADDBA_COMPLETE)) + return -EAGAIN; + ++ /* update ampdu factor/density, they may have changed. This may happen ++ * in HT IBSS when a beacon with HT-info is received after the station ++ * has already been added. ++ */ ++ if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) { ++ an->maxampdu = 1 << (IEEE80211_HT_MAX_AMPDU_FACTOR + ++ sta->ht_cap.ampdu_factor); ++ density = ath9k_parse_mpdudensity(sta->ht_cap.ampdu_density); ++ an->mpdudensity = density; ++ } ++ + txtid->state |= AGGR_ADDBA_PROGRESS; + txtid->paused = true; + *ssn = txtid->seq_start = txtid->seq_next; +@@ -1776,10 +1778,22 @@ static void setup_frame_info(struct ieee struct ieee80211_sta *sta = tx_info->control.sta; struct ieee80211_key_conf *hw_key = tx_info->control.hw_key; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; @@ -1534,7 +1595,7 @@ keytype = ath9k_cmn_get_hw_crypto_keytype(skb); if (sta) -@@ -1794,6 +1796,9 @@ static void setup_frame_info(struct ieee +@@ -1794,6 +1808,9 @@ static void setup_frame_info(struct ieee fi->keyix = ATH9K_TXKEYIX_INVALID; fi->keytype = keytype; fi->framelen = framelen; @@ -1602,3 +1663,21 @@ return err; } +--- a/drivers/net/wireless/ath/ath9k/link.c ++++ b/drivers/net/wireless/ath/ath9k/link.c +@@ -407,6 +407,7 @@ void ath_ani_calibrate(unsigned long dat + longcal ? "long" : "", shortcal ? "short" : "", + aniflag ? "ani" : "", common->ani.caldone ? "true" : "false"); + ++ ath9k_debug_samp_bb_mac(sc); + ath9k_ps_restore(sc); + + set_timer: +@@ -415,7 +416,6 @@ set_timer: + * The interval must be the shortest necessary to satisfy ANI, + * short calibration and long calibration. + */ +- ath9k_debug_samp_bb_mac(sc); + cal_interval = ATH_LONG_CALINTERVAL; + if (sc->sc_ah->config.enable_ani) + cal_interval = min(cal_interval, diff --git a/package/mac80211/patches/512-ath9k_channelbw_debugfs.patch b/package/mac80211/patches/512-ath9k_channelbw_debugfs.patch index 7feed482bf..6126313b6e 100644 --- a/package/mac80211/patches/512-ath9k_channelbw_debugfs.patch +++ b/package/mac80211/patches/512-ath9k_channelbw_debugfs.patch @@ -80,7 +80,7 @@ } --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c -@@ -1122,7 +1122,7 @@ static void ath9k_disable_ps(struct ath_ +@@ -1124,7 +1124,7 @@ static void ath9k_disable_ps(struct ath_ ath_dbg(common, PS, "PowerSave disabled\n"); } @@ -89,7 +89,7 @@ { struct ath_softc *sc = hw->priv; struct ath_hw *ah = sc->sc_ah; -@@ -1173,9 +1173,11 @@ static int ath9k_config(struct ieee80211 +@@ -1175,9 +1175,11 @@ static int ath9k_config(struct ieee80211 if ((changed & IEEE80211_CONF_CHANGE_CHANNEL) || reset_channel) { struct ieee80211_channel *curchan = hw->conf.channel; @@ -101,7 +101,7 @@ if (ah->curchan) old_pos = ah->curchan - &ah->channels[0]; -@@ -1218,7 +1220,23 @@ static int ath9k_config(struct ieee80211 +@@ -1220,7 +1222,23 @@ static int ath9k_config(struct ieee80211 memset(&sc->survey[pos], 0, sizeof(struct survey_info)); } diff --git a/package/mac80211/patches/521-ath9k_cur_txpower.patch b/package/mac80211/patches/521-ath9k_cur_txpower.patch index f5d359bb2f..2b478184cc 100644 --- a/package/mac80211/patches/521-ath9k_cur_txpower.patch +++ b/package/mac80211/patches/521-ath9k_cur_txpower.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c -@@ -1243,6 +1243,8 @@ int ath9k_config(struct ieee80211_hw *hw +@@ -1245,6 +1245,8 @@ int ath9k_config(struct ieee80211_hw *hw return -EINVAL; } @@ -9,7 +9,7 @@ /* * The most recent snapshot of channel->noisefloor for the old * channel is only available after the hardware reset. Copy it to -@@ -1257,6 +1259,7 @@ int ath9k_config(struct ieee80211_hw *hw +@@ -1259,6 +1261,7 @@ int ath9k_config(struct ieee80211_hw *hw sc->config.txpowlimit = 2 * conf->power_level; ath9k_cmn_update_txpow(ah, sc->curtxpow, sc->config.txpowlimit, &sc->curtxpow); diff --git a/package/mac80211/patches/530-ath9k_limit_qlen.patch b/package/mac80211/patches/530-ath9k_limit_qlen.patch index b66289bda1..6c85b429ea 100644 --- a/package/mac80211/patches/530-ath9k_limit_qlen.patch +++ b/package/mac80211/patches/530-ath9k_limit_qlen.patch @@ -65,7 +65,7 @@ __skb_unlink(skb, &tid->buf_q); list_add_tail(&bf->list, bf_q); if (bf_prev) -@@ -1728,6 +1739,8 @@ static void ath_tx_send_ampdu(struct ath +@@ -1740,6 +1751,8 @@ static void ath_tx_send_ampdu(struct ath /* Add sub-frame to BAW */ ath_tx_addto_baw(sc, tid, bf->bf_state.seqno); @@ -74,7 +74,7 @@ /* Queue to h/w without aggregation */ TX_STAT_INC(txctl->txq->axq_qnum, a_queued_hw); bf->bf_lastbf = bf; -@@ -1878,22 +1891,11 @@ error: +@@ -1890,22 +1903,11 @@ error: /* FIXME: tx power */ static void ath_tx_start_dma(struct ath_softc *sc, struct sk_buff *skb, @@ -99,7 +99,7 @@ if ((tx_info->flags & IEEE80211_TX_CTL_AMPDU) && tid) { /* -@@ -1925,6 +1927,7 @@ int ath_tx_start(struct ieee80211_hw *hw +@@ -1937,6 +1939,7 @@ int ath_tx_start(struct ieee80211_hw *hw struct ieee80211_vif *vif = info->control.vif; struct ath_softc *sc = hw->priv; struct ath_txq *txq = txctl->txq; @@ -107,7 +107,7 @@ int padpos, padsize; int frmlen = skb->len + FCS_LEN; int q; -@@ -1967,6 +1970,24 @@ int ath_tx_start(struct ieee80211_hw *hw +@@ -1979,6 +1982,24 @@ int ath_tx_start(struct ieee80211_hw *hw setup_frame_info(hw, skb, frmlen); @@ -132,7 +132,7 @@ /* * At this point, the vif, hw_key and sta pointers in the tx control * info are no longer valid (overwritten by the ath_frame_info data. -@@ -1981,7 +2002,7 @@ int ath_tx_start(struct ieee80211_hw *hw +@@ -1993,7 +2014,7 @@ int ath_tx_start(struct ieee80211_hw *hw txq->stopped = true; }