From: hungrymonkey <psuedofinnish@psuedos-MBP.lan>
Date: Tue, 23 Jan 2018 07:04:53 +0000 (-0800)
Subject: Added GL-AR300M documentation.
X-Git-Tag: v1.4.3~35^2
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=0b887021cdf0b104d21f8e77e011d56ac18580b6;p=librecmc%2Flibrecmc.git

Added GL-AR300M documentation.
The router is currently unsupported by Librecmc at the moment
---

diff --git a/docs/GL-AR300M.md b/docs/GL-AR300M.md
new file mode 100644
index 0000000000..91c5146e2a
--- /dev/null
+++ b/docs/GL-AR300M.md
@@ -0,0 +1,44 @@
+# GL-INet AR300M
+
+## Hardware Specs
+
+* SoC : Qualcomm Atheros QCA9531
+* Flash ROM : 16 MB Nor + 128 MB Nand
+* RAM : 128 MB
+
+## Flashing from factory
+
+### Using the factory web UI
+
+1) Set computer IP address to 192.168.1.2
+
+2) Connect the enternet from the computer to "lan" port on the router
+
+3) Press and hold the reset button, and power on the router by plugging in the power
+
+3) Wait until the LED flashes before releasing the reset button.
+
+4) Open IP address in the browser 192.168.1.1
+
+5) Flash the appropriate image through the gui
+
+
+## Tested
+
+* v1.4.2 librecmc-ar71xx-nand-gl-ar300m-ubi-factory.img
+
+## Reset Instructions
+
+????
+
+## Notes:
+
+* This router is currently not officially supported by Librecmc
+
+* This router is dual flash and stock uboot attempts to boot nand flash first.
+
+* NOR flash uses .bin image and Nand flash uses .img image.
+
+* Default router ip is 192.168.10.1
+
+* On KDE, Disable change ipv4 method from automatic to manual to set the computer ip to 192.168.1.2.