From: Simon Glass Date: Fri, 14 Sep 2018 10:57:28 +0000 (-0600) Subject: binman: Support adding files X-Git-Tag: v2018.11-rc1~2^2~23 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=0a98b28b06800da48f006069fe14e47dd399d2ff;p=oweals%2Fu-boot.git binman: Support adding files In some cases it is useful to add a group of files to the image and be able to access them at run-time. Of course it is possible to generate the binman config file with a set of blobs each with a filename. But for convenience, add an entry type which can do this. Add required support (for adding nodes and string properties) into the state module. Signed-off-by: Simon Glass --- diff --git a/tools/binman/README.entries b/tools/binman/README.entries index 2cf7dc0338..3afc560052 100644 --- a/tools/binman/README.entries +++ b/tools/binman/README.entries @@ -71,6 +71,21 @@ updating the EC on startup via software sync. +Entry: files: Entry containing a set of files +--------------------------------------------- + +Properties / Entry arguments: + - pattern: Filename pattern to match the files to include + - compress: Compression algorithm to use: + none: No compression + lz4: Use lz4 compression (via 'lz4' command-line utility) + +This entry reads a number of files and places each in a separate sub-entry +within this entry. To access these you need to enable device-tree updates +at run-time so you can obtain the file positions. + + + Entry: fill: An entry which is filled to a particular byte value ---------------------------------------------------------------- diff --git a/tools/binman/bsection.py b/tools/binman/bsection.py index 1c37d84e99..4bf206878d 100644 --- a/tools/binman/bsection.py +++ b/tools/binman/bsection.py @@ -103,6 +103,10 @@ class Section(object): def SetOffset(self, offset): self._offset = offset + def ExpandEntries(self): + for entry in self._entries.values(): + entry.ExpandEntries() + def AddMissingProperties(self): """Add new properties to the device tree as needed for this entry""" for prop in ['offset', 'size', 'image-pos']: diff --git a/tools/binman/control.py b/tools/binman/control.py index e326456a4b..caa194c899 100644 --- a/tools/binman/control.py +++ b/tools/binman/control.py @@ -146,6 +146,7 @@ def Binman(options, args): # without changing the device-tree size, thus ensuring that our # entry offsets remain the same. for image in images.values(): + image.ExpandEntries() if options.update_fdt: image.AddMissingProperties() image.ProcessFdt(dtb) diff --git a/tools/binman/entry.py b/tools/binman/entry.py index f922107523..7316ad43b5 100644 --- a/tools/binman/entry.py +++ b/tools/binman/entry.py @@ -179,6 +179,9 @@ class Entry(object): return Set([fname]) return Set() + def ExpandEntries(self): + pass + def AddMissingProperties(self): """Add new properties to the device tree as needed for this entry""" for prop in ['offset', 'size', 'image-pos']: diff --git a/tools/binman/etype/files.py b/tools/binman/etype/files.py new file mode 100644 index 0000000000..99f2f2f67f --- /dev/null +++ b/tools/binman/etype/files.py @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2018 Google, Inc +# Written by Simon Glass +# +# Entry-type module for a set of files which are placed in individual +# sub-entries +# + +import glob +import os + +from section import Entry_section +import fdt_util +import state +import tools + +import bsection + +class Entry_files(Entry_section): + """Entry containing a set of files + + Properties / Entry arguments: + - pattern: Filename pattern to match the files to include + - compress: Compression algorithm to use: + none: No compression + lz4: Use lz4 compression (via 'lz4' command-line utility) + + This entry reads a number of files and places each in a separate sub-entry + within this entry. To access these you need to enable device-tree updates + at run-time so you can obtain the file positions. + """ + def __init__(self, section, etype, node): + Entry_section.__init__(self, section, etype, node) + self._pattern = fdt_util.GetString(self._node, 'pattern') + if not self._pattern: + self.Raise("Missing 'pattern' property") + self._compress = fdt_util.GetString(self._node, 'compress', 'none') + self._require_matches = fdt_util.GetBool(self._node, + 'require-matches') + + def ExpandEntries(self): + files = tools.GetInputFilenameGlob(self._pattern) + if self._require_matches and not files: + self.Raise("Pattern '%s' matched no files" % self._pattern) + for fname in files: + if not os.path.isfile(fname): + continue + name = os.path.basename(fname) + subnode = self._node.FindNode(name) + if not subnode: + subnode = state.AddSubnode(self._node, name) + state.AddString(subnode, 'type', 'blob') + state.AddString(subnode, 'filename', fname) + state.AddString(subnode, 'compress', self._compress) + + # Read entries again, now that we have some + self._section._ReadEntries() diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py index 1c3c46fc23..e919e702b5 100644 --- a/tools/binman/ftest.py +++ b/tools/binman/ftest.py @@ -54,6 +54,8 @@ CROS_EC_RW_DATA = 'ecrw' GBB_DATA = 'gbbd' BMPBLK_DATA = 'bmp' VBLOCK_DATA = 'vblk' +FILES_DATA = ("sorry I'm late\nOh, don't bother apologising, I'm " + + "sorry you're alive\n") COMPRESS_DATA = 'data to compress' @@ -117,6 +119,9 @@ class TestFunctional(unittest.TestCase): with open(self.TestFile('descriptor.bin')) as fd: TestFunctional._MakeInputFile('descriptor.bin', fd.read()) + shutil.copytree(self.TestFile('files'), + os.path.join(self._indir, 'files')) + TestFunctional._MakeInputFile('compress', COMPRESS_DATA) @classmethod @@ -1536,6 +1541,44 @@ class TestFunctional(unittest.TestCase): } self.assertEqual(expected, props) + def testFiles(self): + """Test bringing in multiple files""" + data = self._DoReadFile('84_files.dts') + self.assertEqual(FILES_DATA, data) + + def testFilesCompress(self): + """Test bringing in multiple files and compressing them""" + data = self._DoReadFile('85_files_compress.dts') + + image = control.images['image'] + entries = image.GetEntries() + files = entries['files'] + entries = files._section._entries + + orig = '' + for i in range(1, 3): + key = '%d.dat' % i + start = entries[key].image_pos + len = entries[key].size + chunk = data[start:start + len] + orig += self._decompress(chunk) + + self.assertEqual(FILES_DATA, orig) + + def testFilesMissing(self): + """Test missing files""" + with self.assertRaises(ValueError) as e: + data = self._DoReadFile('86_files_none.dts') + self.assertIn("Node '/binman/files': Pattern \'files/*.none\' matched " + 'no files', str(e.exception)) + + def testFilesNoPattern(self): + """Test missing files""" + with self.assertRaises(ValueError) as e: + data = self._DoReadFile('87_files_no_pattern.dts') + self.assertIn("Node '/binman/files': Missing 'pattern' property", + str(e.exception)) + if __name__ == "__main__": unittest.main() diff --git a/tools/binman/image.py b/tools/binman/image.py index bfb2229779..4b922b51c4 100644 --- a/tools/binman/image.py +++ b/tools/binman/image.py @@ -58,6 +58,15 @@ class Image: """Get the set of device tree files used by this image""" return self._section.GetFdtSet() + def ExpandEntries(self): + """Expand out any entries which have calculated sub-entries + + Some entries are expanded out at runtime, e.g. 'files', which produces + a section containing a list of files. Process these entries so that + this information is added to the device tree. + """ + self._section.ExpandEntries() + def AddMissingProperties(self): """Add properties that are not present in the device tree diff --git a/tools/binman/state.py b/tools/binman/state.py index 09ead442a6..2f8c0863a8 100644 --- a/tools/binman/state.py +++ b/tools/binman/state.py @@ -189,6 +189,33 @@ def AddZeroProp(node, prop): for n in GetUpdateNodes(node): n.AddZeroProp(prop) +def AddSubnode(node, name): + """Add a new subnode to a node in affected device trees + + Args: + node: Node to add to + name: name of node to add + + Returns: + New subnode that was created in main tree + """ + first = None + for n in GetUpdateNodes(node): + subnode = n.AddSubnode(name) + if not first: + first = subnode + return first + +def AddString(node, prop, value): + """Add a new string property to affected device trees + + Args: + prop_name: Name of property + value: String value (which will be \0-terminated in the DT) + """ + for n in GetUpdateNodes(node): + n.AddString(prop, value) + def SetInt(node, prop, value): """Update an integer property in affected device trees with an integer value diff --git a/tools/binman/test/84_files.dts b/tools/binman/test/84_files.dts new file mode 100644 index 0000000000..83ddb78f8e --- /dev/null +++ b/tools/binman/test/84_files.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +/ { + binman { + files { + pattern = "files/*.dat"; + compress = "none"; + }; + }; +}; diff --git a/tools/binman/test/85_files_compress.dts b/tools/binman/test/85_files_compress.dts new file mode 100644 index 0000000000..847b398bf2 --- /dev/null +++ b/tools/binman/test/85_files_compress.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +/ { + binman { + files { + pattern = "files/*.dat"; + compress = "lz4"; + }; + }; +}; diff --git a/tools/binman/test/86_files_none.dts b/tools/binman/test/86_files_none.dts new file mode 100644 index 0000000000..34bd92f224 --- /dev/null +++ b/tools/binman/test/86_files_none.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +/ { + binman { + files { + pattern = "files/*.none"; + compress = "none"; + require-matches; + }; + }; +}; diff --git a/tools/binman/test/87_files_no_pattern.dts b/tools/binman/test/87_files_no_pattern.dts new file mode 100644 index 0000000000..0cb5b469cb --- /dev/null +++ b/tools/binman/test/87_files_no_pattern.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +/ { + binman { + files { + compress = "none"; + require-matches; + }; + }; +}; diff --git a/tools/binman/test/files/1.dat b/tools/binman/test/files/1.dat new file mode 100644 index 0000000000..a952470617 --- /dev/null +++ b/tools/binman/test/files/1.dat @@ -0,0 +1 @@ +sorry I'm late diff --git a/tools/binman/test/files/2.dat b/tools/binman/test/files/2.dat new file mode 100644 index 0000000000..687ea52730 --- /dev/null +++ b/tools/binman/test/files/2.dat @@ -0,0 +1 @@ +Oh, don't bother apologising, I'm sorry you're alive diff --git a/tools/binman/test/files/ignored_dir.dat/ignore b/tools/binman/test/files/ignored_dir.dat/ignore new file mode 100644 index 0000000000..e69de29bb2 diff --git a/tools/binman/test/files/not-this-one b/tools/binman/test/files/not-this-one new file mode 100644 index 0000000000..e71c2250f9 --- /dev/null +++ b/tools/binman/test/files/not-this-one @@ -0,0 +1 @@ +this does not have a .dat extenion diff --git a/tools/patman/tools.py b/tools/patman/tools.py index 0870bccca0..1c9bf4e810 100644 --- a/tools/patman/tools.py +++ b/tools/patman/tools.py @@ -4,6 +4,7 @@ # import command +import glob import os import shutil import tempfile @@ -123,6 +124,23 @@ def GetInputFilename(fname): raise ValueError("Filename '%s' not found in input path (%s) (cwd='%s')" % (fname, ','.join(indir), os.getcwd())) +def GetInputFilenameGlob(pattern): + """Return a list of filenames for use as input. + + Args: + pattern: Filename pattern to search for + + Returns: + A list of matching files in all input directories + """ + if not indir: + return glob.glob(fname) + files = [] + for dirname in indir: + pathname = os.path.join(dirname, pattern) + files += glob.glob(pathname) + return sorted(files) + def Align(pos, align): if align: mask = align - 1