From: Florian Fainelli Date: Tue, 28 Dec 2010 00:24:50 +0000 (+0000) Subject: spi driver: remove bcm_rset usage X-Git-Tag: reboot~17957 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=093ebfe2173d80654c17c286241c36aa8dd13876;p=oweals%2Fopenwrt.git spi driver: remove bcm_rset usage Since bcm636x platform embeds two spi master device, the attached patch removes static bcm_rset usage, replaced by "bs->regs" field for all I/O operation. Signed-off-by: Miguel Gaio SVN-Revision: 24840 --- diff --git a/target/linux/brcm63xx/patches-2.6.35/240-spi.patch b/target/linux/brcm63xx/patches-2.6.35/240-spi.patch index 62afe8c13f..ab12a6f2b7 100644 --- a/target/linux/brcm63xx/patches-2.6.35/240-spi.patch +++ b/target/linux/brcm63xx/patches-2.6.35/240-spi.patch @@ -318,7 +318,7 @@ #endif /* BCM63XX_REGS_H_ */ --- /dev/null +++ b/drivers/spi/bcm63xx_spi.c -@@ -0,0 +1,479 @@ +@@ -0,0 +1,501 @@ +/* + * Broadcom BCM63xx SPI controller support + * @@ -357,11 +357,11 @@ + +struct bcm63xx_spi { + spinlock_t lock; -+ int stopping; ++ int stopping; + struct completion done; + -+ void __iomem *regs; -+ int irq; ++ void __iomem *regs; ++ int irq; + + /* Platform data */ + u32 speed_hz; @@ -376,6 +376,30 @@ + struct platform_device *pdev; +}; + ++static inline u8 bcm_spi_readb(struct bcm63xx_hsspi *bs, ++ unsigned int offset) ++{ ++ return bcm_readw(bs->regs + bcm63xx_spireg(offset)); ++} ++ ++static inline u16 bcm_spi_readw(struct bcm63xx_hsspi *bs, ++ unsigned int offset) ++{ ++ return bcm_readw(bs->regs + bcm63xx_spireg(offset)); ++} ++ ++static inline void bcm_spi_writeb(struct bcm63xx_hsspi *bs, ++ u8 value, unsigned int offset) ++{ ++ bcm_writeb(value, bs->regs + bcm63xx_spireg(offset)); ++} ++ ++static inline void bcm_spi_writew(struct bcm63xx_hsspi *bs, ++ u16 value, unsigned int offset) ++{ ++ bcm_writew(value, bs->regs + bcm63xx_spireg(offset)); ++} ++ +static int bcm63xx_spi_setup_transfer(struct spi_device *spi, + struct spi_transfer *t) +{ @@ -428,7 +452,7 @@ + break; + } + -+ bcm_spi_writeb(clk_cfg, SPI_CLK_CFG); ++ bcm_spi_writeb(bs, clk_cfg, SPI_CLK_CFG); + dev_dbg(&spi->dev, "Setting clock register to %d (hz %d, cmd %02x)\n", + div, hz, clk_cfg); + @@ -441,7 +465,7 @@ +static int bcm63xx_spi_setup(struct spi_device *spi) +{ + struct bcm63xx_spi *bs; -+ int retval; ++ int ret; + + bs = spi_master_get_devdata(spi->master); + @@ -457,11 +481,11 @@ + return -EINVAL; + } + -+ retval = bcm63xx_spi_setup_transfer(spi, NULL); -+ if (retval < 0) { ++ ret = bcm63xx_spi_setup_transfer(spi, NULL); ++ if (ret < 0) { + dev_err(&spi->dev, "setup: unsupported mode bits %x\n", + spi->mode & ~MODEBITS); -+ return retval; ++ return ret; + } + + dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n", @@ -473,20 +497,20 @@ +/* Fill the TX FIFO with as many bytes as possible */ +static void bcm63xx_spi_fill_tx_fifo(struct bcm63xx_spi *bs) +{ -+ u8 tail; ++ u8 tail; + + /* Fill the Tx FIFO with as many bytes as possible */ -+ tail = bcm_spi_readb(SPI_MSG_TAIL); ++ tail = bcm_spi_readb(bs, SPI_MSG_TAIL); + -+ while ((tail < bs->fifo_size) && (bs->remaining_bytes > 0)) { -+ if (bs->tx_ptr) -+ bcm_spi_writeb(*bs->tx_ptr++, SPI_MSG_DATA); ++ while ((tail < bs->fifo_size) && (bs->remaining_bytes > 0)) { ++ if (bs->tx_ptr) ++ bcm_spi_writeb(bs, *bs->tx_ptr++, SPI_MSG_DATA); + else -+ bcm_spi_writeb(0, SPI_MSG_DATA); ++ bcm_spi_writeb(bs, 0, SPI_MSG_DATA); + -+ bs->remaining_bytes--; -+ tail = bcm_spi_readb(SPI_MSG_TAIL); -+ } ++ bs->remaining_bytes--; ++ tail = bcm_spi_readb(bs, SPI_MSG_TAIL); ++ } +} + +static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) @@ -510,7 +534,7 @@ + + /* Enable the command done interrupt which + * we use to determine completion of a command */ -+ bcm_spi_writeb(SPI_INTR_CMD_DONE, SPI_INT_MASK); ++ bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK); + + /* Fill in the Message control register */ + msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT); @@ -522,37 +546,37 @@ + else if (t->tx_buf) + msg_ctl |= (SPI_HD_W << SPI_MSG_TYPE_SHIFT); + -+ bcm_spi_writew(msg_ctl, SPI_MSG_CTL); ++ bcm_spi_writew(bs, msg_ctl, SPI_MSG_CTL); + + /* Issue the transfer */ + cmd = SPI_CMD_START_IMMEDIATE; + cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT); -+ bcm_spi_writew(cmd, SPI_CMD); ++ bcm_spi_writew(bs, cmd, SPI_CMD); + wait_for_completion(&bs->done); + + /* Disable the CMD_DONE interrupt */ -+ bcm_spi_writeb(0, SPI_INT_MASK); ++ bcm_spi_writeb(bs, 0, SPI_INT_MASK); + + return t->len - bs->remaining_bytes; +} + -+static int bcm63xx_transfer(struct spi_device *spi, struct spi_message *msg) ++static int bcm63xx_transfer(struct spi_device *spi, struct spi_message *m) +{ + struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master); -+ struct spi_transfer *xfer; ++ struct spi_transfer *t; + int ret = 0; + -+ if (unlikely(list_empty(&msg->transfers))) ++ if (unlikely(list_empty(&m->transfers))) + return -EINVAL; + + if (bs->stopping) + return -ESHUTDOWN; + -+ list_for_each_entry(xfer, &msg->transfers, transfer_list) { -+ ret += bcm63xx_txrx_bufs(spi, xfer); ++ list_for_each_entry(t, &m->transfers, transfer_list) { ++ ret += bcm63xx_txrx_bufs(spi, t); + } + -+ msg->complete(msg->context); ++ m->complete(m->context); + + return ret; +} @@ -568,15 +592,15 @@ + u16 cmd; + + /* Read interupts and clear them immediately */ -+ intr = bcm_spi_readb(SPI_INT_STATUS); -+ bcm_spi_writeb(SPI_INTR_CLEAR_ALL, SPI_INT_STATUS); -+ bcm_spi_writeb(0, SPI_INT_MASK); ++ intr = bcm_spi_readb(bs, SPI_INT_STATUS); ++ bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS); ++ bcm_spi_writeb(bs, 0, SPI_INT_MASK); + + /* A tansfer completed */ + if (intr & SPI_INTR_CMD_DONE) { + u8 rx_tail; + -+ rx_tail = bcm_spi_readb(SPI_RX_TAIL); ++ rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL); + + /* Read out all the data */ + if (rx_tail) { @@ -584,7 +608,7 @@ + u8 i = 0; + + for(i = 0; i < rx_tail; i++) { -+ data = bcm_spi_readb(SPI_RX_DATA); ++ data = bcm_spi_readb(bs, SPI_RX_DATA); + if (bs->rx_ptr) + *bs->rx_ptr++ = data; + } @@ -595,13 +619,13 @@ + bcm63xx_spi_fill_tx_fifo(bs); + + /* Start the transfer */ -+ bcm_spi_writew(SPI_HD_W << SPI_MSG_TYPE_SHIFT, ++ bcm_spi_writew(bs, SPI_HD_W << SPI_MSG_TYPE_SHIFT, + SPI_MSG_CTL); -+ cmd = bcm_spi_readw(SPI_CMD); ++ cmd = bcm_spi_readw(bs, SPI_CMD); + cmd |= SPI_CMD_START_IMMEDIATE; + cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT); -+ bcm_spi_writeb(SPI_INTR_CMD_DONE, SPI_INT_MASK); -+ bcm_spi_writew(cmd, SPI_CMD); ++ bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK); ++ bcm_spi_writew(bs, cmd, SPI_CMD); + } else { + complete(&bs->done); + } @@ -636,14 +660,14 @@ + goto out; + } + -+ clk = clk_get(&pdev->dev, "spi"); ++ clk = clk_get(dev, "spi"); + if (IS_ERR(clk)) { + dev_err(dev, "no clock for device\n"); + ret = -ENODEV; + goto out; + } + -+ master = spi_alloc_master(&pdev->dev, sizeof(struct bcm63xx_spi)); ++ master = spi_alloc_master(dev, sizeof(*bs)); + if (!master) { + dev_err(dev, "out of memory\n"); + ret = -ENOMEM; @@ -654,16 +678,15 @@ + init_completion(&bs->done); + + platform_set_drvdata(pdev, master); -+ bs->pdev = pdev; ++ bs->pdev = pdev; + -+ if (!request_mem_region(r->start, -+ r->end - r->start, PFX)) { ++ if (!request_mem_region(r->start, r->end - r->start, PFX)) { + dev_err(dev, "iomem request failed\n"); + ret = -ENXIO; + goto out_put_master; + } + -+ bs->regs = ioremap_nocache(r->start, r->end - r->start); ++ bs->regs = ioremap_nocache(r->start, r->end - r->start); + if (!bs->regs) { + dev_err(dev, "unable to ioremap regs\n"); + ret = -ENOMEM; @@ -673,8 +696,7 @@ + bs->clk = clk; + bs->fifo_size = pdata->fifo_size; + -+ ret = request_irq(irq, bcm63xx_spi_interrupt, 0, -+ pdev->name, master); ++ ret = request_irq(irq, bcm63xx_spi_interrupt, 0, pdev->name, master); + if (ret) { + dev_err(dev, "unable to request irq\n"); + goto out_unmap; @@ -690,7 +712,7 @@ + + /* Initialize hardware */ + clk_enable(bs->clk); -+ bcm_spi_writeb(SPI_INTR_CLEAR_ALL, SPI_INT_STATUS); ++ bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS); + + /* register and we are done */ + ret = spi_register_master(master); @@ -702,7 +724,7 @@ + dev_info(dev, "at 0x%08x (irq %d, FIFOs size %d) v%s\n", + r->start, irq, bs->fifo_size, DRV_VER); + -+ return ret; ++ return 0; + +out_reset_hw: + clk_disable(clk); @@ -719,12 +741,12 @@ + +static int __exit bcm63xx_spi_remove(struct platform_device *pdev) +{ -+ struct spi_master *master = platform_get_drvdata(pdev); -+ struct bcm63xx_spi *bs = spi_master_get_devdata(master); -+ struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ struct spi_master *master = platform_get_drvdata(pdev); ++ struct bcm63xx_spi *bs = spi_master_get_devdata(master); ++ struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + /* reset spi block */ -+ bcm_spi_writeb(0, SPI_INT_MASK); ++ bcm_spi_writeb(bs, 0, SPI_INT_MASK); + spin_lock(&bs->lock); + bs->stopping = 1; + @@ -825,7 +847,7 @@ spi_s3c24xx_hw-y := spi_s3c24xx.o --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h -@@ -0,0 +1,136 @@ +@@ -0,0 +1,126 @@ +#ifndef BCM63XX_DEV_SPI_H +#define BCM63XX_DEV_SPI_H + @@ -951,16 +973,6 @@ + return 0; +} + -+/* -+ * helpers for the SPI register sets -+ */ -+#define bcm_spi_readb(o) bcm_rset_readb(RSET_SPI, bcm63xx_spireg(o)) -+#define bcm_spi_readw(o) bcm_rset_readw(RSET_SPI, bcm63xx_spireg(o)) -+#define bcm_spi_readl(o) bcm_rset_readl(RSET_SPI, bcm63xx_spireg(o)) -+#define bcm_spi_writeb(v,o) bcm_rset_writeb(RSET_SPI, (v), bcm63xx_spireg(o)) -+#define bcm_spi_writew(v,o) bcm_rset_writew(RSET_SPI, (v), bcm63xx_spireg(o)) -+#define bcm_spi_writel(v,o) bcm_rset_writel(RSET_SPI, (v), bcm63xx_spireg(o)) -+ +#endif /* BCM63XX_DEV_SPI_H */ --- a/arch/mips/bcm63xx/Makefile +++ b/arch/mips/bcm63xx/Makefile