From: Otavio Salvador Date: Mon, 16 Dec 2013 22:44:02 +0000 (-0200) Subject: mx28evk: Add 'nandboot' environment command X-Git-Tag: v2014.01-rc3~9^2~47^2~4 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=09308e8e4953886951a3b5921d6944584e997dc0;p=oweals%2Fu-boot.git mx28evk: Add 'nandboot' environment command This reads the kernel, ftd and boot into ubifs filesystem. While on that, the SD firmware filename definition has been moved next to the other SD related commands. Signed-off-by: Otavio Salvador Reviewed-by: Fabio Estevam --- diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index 3de059941a..6c9fa007fa 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -162,7 +162,6 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "update_nand_full_filename=u-boot.nand\0" \ "update_nand_firmware_filename=u-boot.sb\0" \ - "update_sd_firmware_filename=u-boot.sd\0" \ "update_nand_firmware_maxsz=0x100000\0" \ "update_nand_stride=0x40\0" /* MX28 datasheet ch. 12.12 */ \ "update_nand_count=0x4\0" /* MX28 datasheet ch. 12.12 */ \ @@ -190,6 +189,23 @@ "nand write ${loadaddr} ${fcb_sz} ${filesize} ; " \ "nand write ${loadaddr} ${fw_off} ${filesize} ; " \ "fi\0" \ + "nandargs=setenv bootargs console=${console_mainline},${baudrate} " \ + "rootfstype=ubifs ubi.mtd=6 root=ubi0_0 ${mtdparts}\0" \ + "nandboot=" /* Boot from NAND */ \ + "mtdparts default; " \ + "run nandargs; " \ + "nand read ${loadaddr} kernel 0x00400000; " \ + "if test ${boot_fdt} = yes; then " \ + "nand read ${fdt_addr} fdt 0x00080000; " \ + "bootm ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = no; then " \ + "bootm; " \ + "else " \ + "echo \"ERROR: Set boot_fdt to yes or no.\"; " \ + "fi; " \ + "fi\0" \ + "update_sd_firmware_filename=u-boot.sd\0" \ "update_sd_firmware=" /* Update the SD firmware partition */ \ "if mmc rescan ; then " \ "if tftp ${update_sd_firmware_filename} ; then " \