From: Wolfgang Denk Date: Thu, 21 Jul 2005 13:23:29 +0000 (+0200) Subject: Add CompactFlash support for HMI1001 board. X-Git-Tag: LABEL_2006_03_12_0025~265 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=08abe15850b5cbac4a3975a191ddbc10d416aa21;p=oweals%2Fu-boot.git Add CompactFlash support for HMI1001 board. --- diff --git a/CHANGELOG b/CHANGELOG index 4054e82194..3cfb1633f0 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,10 @@ Changes for U-Boot 1.1.3: ====================================================================== +* Add CompactFlash support for HMI1001 board. + +* Adjust printed board ID for LWMON board. + * Add new argument format for flash commands to allow for usage like "erase $(addr) +$(filesize)", i. e. a size argument can be used and U-Boot will automaticially find the end of the corresponding sector. diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h index 4e44bde624..aec405b160 100644 --- a/include/configs/hmi1001.h +++ b/include/configs/hmi1001.h @@ -52,6 +52,9 @@ #define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } +/* Partitions */ +#define CONFIG_DOS_PARTITION + /* * Supported commands */ @@ -60,6 +63,7 @@ CFG_CMD_DHCP | \ CFG_CMD_EEPROM | \ CFG_CMD_I2C | \ + CFG_CMD_IDE | \ CFG_CMD_NFS | \ CFG_CMD_SNTP) @@ -270,4 +274,35 @@ #define CFG_CS_BURST 0x00000000 #define CFG_CS_DEADCYCLE 0x33333333 +/*----------------------------------------------------------------------- + * IDE/ATA stuff Supports IDE harddisk + *----------------------------------------------------------------------- + */ + +#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ + +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CFG_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */ + +#define CFG_ATA_IDE0_OFFSET 0x0000 + +#define CFG_ATA_BASE_ADDR MPC5XXX_ATA + +/* Offset for data I/O */ +#define CFG_ATA_DATA_OFFSET (0x0060) + +/* Offset for normal register accesses */ +#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET) + +/* Offset for alternate registers */ +#define CFG_ATA_ALT_OFFSET (0x005C) + +/* Interval between registers */ +#define CFG_ATA_STRIDE 4 + +#define CONFIG_ATAPI 1 + #endif /* __CONFIG_H */