From: Jagannadha Sutradharudu Teki Date: Wed, 8 Jan 2014 20:18:10 +0000 (+0530) Subject: zynq-common: Rename zynq with zynq-common X-Git-Tag: v2014.01-rc3~9^2~21 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=06fe8daeb5a8c255555b09e1660682560c23df8d;p=oweals%2Fu-boot.git zynq-common: Rename zynq with zynq-common zynq.h -> zynq-common.h, zynq-common is Common configuration options for all Zynq boards. zynq.h is no longer exists hense removed from boards.cfg Signed-off-by: Jagannadha Sutradharudu Teki --- diff --git a/boards.cfg b/boards.cfg index 029553d66f..9e85fe0e23 100644 --- a/boards.cfg +++ b/boards.cfg @@ -357,8 +357,6 @@ Active arm armv7 socfpga altera socfpga Active arm armv7 u8500 st-ericsson snowball snowball - Mathieu Poirier Active arm armv7 u8500 st-ericsson u8500 u8500_href - - Active arm armv7 vf610 freescale vf610twr vf610twr vf610twr:IMX_CONFIG=board/freescale/vf610twr/imximage.cfg Alison Wang -Active arm armv7 zynq xilinx zynq zynq - Michal Simek -Active arm armv7 zynq xilinx zynq zynq_dcc zynq:ZYNQ_DCC Michal Simek Active arm armv7:arm720t tegra114 nvidia dalmore dalmore - Tom Warren Active arm armv7:arm720t tegra20 avionic-design medcom-wide medcom-wide - Alban Bedel Active arm armv7:arm720t tegra20 avionic-design plutux plutux - Alban Bedel diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h new file mode 100644 index 0000000000..9fe06e8459 --- /dev/null +++ b/include/configs/zynq-common.h @@ -0,0 +1,176 @@ +/* + * (C) Copyright 2012 Michal Simek + * (C) Copyright 2013 Xilinx, Inc. + * + * Common configuration options for all Zynq boards. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_ZYNQ_COMMON_H +#define __CONFIG_ZYNQ_COMMON_H + +/* High Level configuration Options */ +#define CONFIG_ARMV7 +#define CONFIG_ZYNQ + +/* CPU clock */ +#ifndef CONFIG_CPU_FREQ_HZ +# define CONFIG_CPU_FREQ_HZ 800000000 +#endif + +/* Cache options */ +#define CONFIG_CMD_CACHE +#define CONFIG_SYS_CACHELINE_SIZE 32 + +#define CONFIG_SYS_L2CACHE_OFF +#ifndef CONFIG_SYS_L2CACHE_OFF +# define CONFIG_SYS_L2_PL310 +# define CONFIG_SYS_PL310_BASE 0xf8f02000 +#endif + +/* Serial drivers */ +#define CONFIG_BAUDRATE 115200 +/* The following table includes the supported baudrates */ +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} + +/* Zynq Serial driver */ +#define CONFIG_ZYNQ_SERIAL_UART1 +#ifdef CONFIG_ZYNQ_SERIAL_UART0 +# define CONFIG_ZYNQ_SERIAL_BASEADDR0 0xE0000000 +# define CONFIG_ZYNQ_SERIAL_BAUDRATE0 CONFIG_BAUDRATE +# define CONFIG_ZYNQ_SERIAL_CLOCK0 50000000 +#endif + +#ifdef CONFIG_ZYNQ_SERIAL_UART1 +# define CONFIG_ZYNQ_SERIAL_BASEADDR1 0xE0001000 +# define CONFIG_ZYNQ_SERIAL_BAUDRATE1 CONFIG_BAUDRATE +# define CONFIG_ZYNQ_SERIAL_CLOCK1 50000000 +#endif + +#if defined(CONFIG_ZYNQ_SERIAL_UART0) || defined(CONFIG_ZYNQ_SERIAL_UART1) +# define CONFIG_ZYNQ_SERIAL +#endif + +/* DCC driver */ +#if defined(CONFIG_ZYNQ_DCC) +# define CONFIG_ARM_DCC +# define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */ +#endif + +/* Ethernet driver */ +#define CONFIG_ZYNQ_GEM0 +#define CONFIG_ZYNQ_GEM_PHY_ADDR0 7 +#if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1) +# define CONFIG_NET_MULTI +# define CONFIG_ZYNQ_GEM +# define CONFIG_MII +# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN +# define CONFIG_PHYLIB +# define CONFIG_PHY_MARVELL +#endif + +#define CONFIG_ZYNQ_SPI +/* SPI */ +#ifdef CONFIG_ZYNQ_SPI +# define CONFIG_SPI_FLASH +# define CONFIG_SPI_FLASH_SST +# define CONFIG_CMD_SF +#endif + +/* NOR */ +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_ZYNQ_SDHCI0 +/* MMC */ +#if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1) +# define CONFIG_MMC +# define CONFIG_GENERIC_MMC +# define CONFIG_SDHCI +# define CONFIG_ZYNQ_SDHCI +# define CONFIG_CMD_MMC +# define CONFIG_CMD_FAT +# define CONFIG_SUPPORT_VFAT +# define CONFIG_CMD_EXT2 +# define CONFIG_DOS_PARTITION +#endif + +#define CONFIG_ZYNQ_I2C0 +/* I2C */ +#if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1) +# define CONFIG_CMD_I2C +# define CONFIG_SYS_I2C +# define CONFIG_SYS_I2C_ZYNQ +# define CONFIG_SYS_I2C_ZYNQ_SPEED 100000 +# define CONFIG_SYS_I2C_ZYNQ_SLAVE 1 +#endif + +#define CONFIG_BOOTP_SERVERIP +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_MAY_FAIL + +/* Environment */ +#define CONFIG_ENV_SIZE 0x10000 /* Env. sector size */ +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_SYS_LOAD_ADDR 0 + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_PROMPT "zynq-uboot> " +#define CONFIG_SYS_HUSH_PARSER + +#define CONFIG_CMDLINE_EDITING +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_MAXARGS 15 /* max number of command args */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* Physical Memory map */ +#define CONFIG_SYS_TEXT_BASE 0 + +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_BASE 0 +#define CONFIG_SYS_SDRAM_SIZE 0x40000000 + +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000) + +#define CONFIG_SYS_MALLOC_LEN 0x400000 +#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) + +/* Enable the PL to be downloaded */ +#define CONFIG_FPGA +#define CONFIG_FPGA_XILINX +#define CONFIG_FPGA_ZYNQPL +#define CONFIG_CMD_FPGA + +/* Open Firmware flat tree */ +#define CONFIG_OF_LIBFDT + +/* FIT support */ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ + +/* Boot FreeBSD/vxWorks from an ELF image */ +#if defined(CONFIG_ZYNQ_BOOT_FREEBSD) +# define CONFIG_API +# define CONFIG_CMD_ELF +# define CONFIG_SYS_MMC_MAX_DEVICE 1 +#endif + +/* Commands */ +#include + +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII + +#endif /* __CONFIG_ZYNQ_COMMON_H */ diff --git a/include/configs/zynq.h b/include/configs/zynq.h deleted file mode 100644 index ea25159a20..0000000000 --- a/include/configs/zynq.h +++ /dev/null @@ -1,173 +0,0 @@ -/* - * (C) Copyright 2012 Michal Simek - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_ZYNQ_H -#define __CONFIG_ZYNQ_H - -/* High Level configuration Options */ -#define CONFIG_ARMV7 -#define CONFIG_ZYNQ - -/* CPU clock */ -#ifndef CONFIG_CPU_FREQ_HZ -# define CONFIG_CPU_FREQ_HZ 800000000 -#endif - -/* Cache options */ -#define CONFIG_CMD_CACHE -#define CONFIG_SYS_CACHELINE_SIZE 32 - -#define CONFIG_SYS_L2CACHE_OFF -#ifndef CONFIG_SYS_L2CACHE_OFF -# define CONFIG_SYS_L2_PL310 -# define CONFIG_SYS_PL310_BASE 0xf8f02000 -#endif - -/* Serial drivers */ -#define CONFIG_BAUDRATE 115200 -/* The following table includes the supported baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} - -/* Zynq Serial driver */ -#define CONFIG_ZYNQ_SERIAL_UART1 -#ifdef CONFIG_ZYNQ_SERIAL_UART0 -# define CONFIG_ZYNQ_SERIAL_BASEADDR0 0xE0000000 -# define CONFIG_ZYNQ_SERIAL_BAUDRATE0 CONFIG_BAUDRATE -# define CONFIG_ZYNQ_SERIAL_CLOCK0 50000000 -#endif - -#ifdef CONFIG_ZYNQ_SERIAL_UART1 -# define CONFIG_ZYNQ_SERIAL_BASEADDR1 0xE0001000 -# define CONFIG_ZYNQ_SERIAL_BAUDRATE1 CONFIG_BAUDRATE -# define CONFIG_ZYNQ_SERIAL_CLOCK1 50000000 -#endif - -#if defined(CONFIG_ZYNQ_SERIAL_UART0) || defined(CONFIG_ZYNQ_SERIAL_UART1) -# define CONFIG_ZYNQ_SERIAL -#endif - -/* DCC driver */ -#if defined(CONFIG_ZYNQ_DCC) -# define CONFIG_ARM_DCC -# define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */ -#endif - -/* Ethernet driver */ -#define CONFIG_ZYNQ_GEM0 -#define CONFIG_ZYNQ_GEM_PHY_ADDR0 7 -#if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1) -# define CONFIG_NET_MULTI -# define CONFIG_ZYNQ_GEM -# define CONFIG_MII -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# define CONFIG_PHYLIB -# define CONFIG_PHY_MARVELL -#endif - -#define CONFIG_ZYNQ_SPI -/* SPI */ -#ifdef CONFIG_ZYNQ_SPI -# define CONFIG_SPI_FLASH -# define CONFIG_SPI_FLASH_SST -# define CONFIG_CMD_SF -#endif - -/* NOR */ -#define CONFIG_SYS_NO_FLASH - -#define CONFIG_ZYNQ_SDHCI0 -/* MMC */ -#if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1) -# define CONFIG_MMC -# define CONFIG_GENERIC_MMC -# define CONFIG_SDHCI -# define CONFIG_ZYNQ_SDHCI -# define CONFIG_CMD_MMC -# define CONFIG_CMD_FAT -# define CONFIG_SUPPORT_VFAT -# define CONFIG_CMD_EXT2 -# define CONFIG_DOS_PARTITION -#endif - -#define CONFIG_ZYNQ_I2C0 -/* I2C */ -#if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1) -# define CONFIG_CMD_I2C -# define CONFIG_SYS_I2C -# define CONFIG_SYS_I2C_ZYNQ -# define CONFIG_SYS_I2C_ZYNQ_SPEED 100000 -# define CONFIG_SYS_I2C_ZYNQ_SLAVE 1 -#endif - -#define CONFIG_BOOTP_SERVERIP -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_MAY_FAIL - -/* Environment */ -#define CONFIG_ENV_SIZE 0x10000 /* Env. sector size */ -#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_SYS_LOAD_ADDR 0 - -/* Miscellaneous configurable options */ -#define CONFIG_SYS_PROMPT "zynq-uboot> " -#define CONFIG_SYS_HUSH_PARSER - -#define CONFIG_CMDLINE_EDITING -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_MAXARGS 15 /* max number of command args */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) - -/* Physical Memory map */ -#define CONFIG_SYS_TEXT_BASE 0 - -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE 0 -#define CONFIG_SYS_SDRAM_SIZE 0x40000000 - -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000) - -#define CONFIG_SYS_MALLOC_LEN 0x400000 -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -/* Enable the PL to be downloaded */ -#define CONFIG_FPGA -#define CONFIG_FPGA_XILINX -#define CONFIG_FPGA_ZYNQPL -#define CONFIG_CMD_FPGA - -/* Open Firmware flat tree */ -#define CONFIG_OF_LIBFDT - -/* FIT support */ -#define CONFIG_FIT -#define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ - -/* Boot FreeBSD/vxWorks from an ELF image */ -#if defined(CONFIG_ZYNQ_BOOT_FREEBSD) -# define CONFIG_API -# define CONFIG_CMD_ELF -# define CONFIG_SYS_MMC_MAX_DEVICE 1 -#endif - -/* Commands */ -#include - -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII - -#endif /* __CONFIG_ZYNQ_H */