From: Horatiu Vultur <horatiu.vultur@microchip.com>
Date: Wed, 24 Apr 2019 09:27:58 +0000 (+0200)
Subject: board: mscc: ocelot: Update MSCC Ocelot board.
X-Git-Tag: v2019.07-rc2~21^2~5
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=06d270cf57a48abbb71daa2ea30178ab04dc9cef;p=oweals%2Fu-boot.git

board: mscc: ocelot: Update MSCC Ocelot board.

Implement method board_phy_config to configure the phy for pcb120.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
---

diff --git a/board/mscc/ocelot/ocelot.c b/board/mscc/ocelot/ocelot.c
index 532d06f000..bcae8fa50c 100644
--- a/board/mscc/ocelot/ocelot.c
+++ b/board/mscc/ocelot/ocelot.c
@@ -11,6 +11,7 @@
 #include <spi.h>
 #include <led.h>
 #include <wait_bit.h>
+#include <miiphy.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -42,6 +43,20 @@ void mscc_switch_reset(bool enter)
 	mscc_gpio_set_alternate(19, 0);
 }
 
+int board_phy_config(struct phy_device *phydev)
+{
+	if (gd->board_type == BOARD_TYPE_PCB123)
+		return 0;
+
+	phy_write(phydev, 0, 31, 0x10);
+	phy_write(phydev, 0, 18, 0x80F0);
+	while (phy_read(phydev, 0, 18) & 0x8000)
+		;
+	phy_write(phydev, 0, 31, 0);
+
+	return 0;
+}
+
 void board_debug_uart_init(void)
 {
 	/* too early for the pinctrl driver, so configure the UART pins here */