From: Marek Vasut Date: Sat, 4 May 2019 11:21:07 +0000 (+0200) Subject: sh: sh7785lcr: Remove the board X-Git-Tag: v2019.07-rc2~16^2~10 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=06480665aa18ad2146b14e14ac2488f88ba274dd;p=oweals%2Fu-boot.git sh: sh7785lcr: Remove the board Last change to this board was done in 2016, it uses non-DM USB with no prospects of ever being converted to DM USB, drop it. Signed-off-by: Marek Vasut Cc: Chris Brandt Cc: Nobuhiro Iwamatsu Cc: Vladimir Zapolskiy Cc: Yoshihiro Shimoda --- diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index ff7932bacb..a5772da87a 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -107,10 +107,6 @@ config TARGET_SH7763RDP bool "SH7763RDP" select CPU_SH4 -config TARGET_SH7785LCR - bool "SH7785LCR" - select CPU_SH4A - endchoice config SYS_ARCH @@ -141,7 +137,6 @@ source "board/renesas/sh7752evb/Kconfig" source "board/renesas/sh7753evb/Kconfig" source "board/renesas/sh7757lcr/Kconfig" source "board/renesas/sh7763rdp/Kconfig" -source "board/renesas/sh7785lcr/Kconfig" source "board/shmin/Kconfig" endmenu diff --git a/board/renesas/sh7785lcr/Kconfig b/board/renesas/sh7785lcr/Kconfig deleted file mode 100644 index e204c76ef5..0000000000 --- a/board/renesas/sh7785lcr/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_SH7785LCR - -config SYS_BOARD - default "sh7785lcr" - -config SYS_VENDOR - default "renesas" - -config SYS_CONFIG_NAME - default "sh7785lcr" - -endif diff --git a/board/renesas/sh7785lcr/MAINTAINERS b/board/renesas/sh7785lcr/MAINTAINERS deleted file mode 100644 index 17578e036a..0000000000 --- a/board/renesas/sh7785lcr/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -SH7785LCR BOARD -#M: - -S: Maintained -F: board/renesas/sh7785lcr/ -F: include/configs/sh7785lcr.h -F: configs/sh7785lcr_defconfig -F: configs/sh7785lcr_32bit_defconfig diff --git a/board/renesas/sh7785lcr/Makefile b/board/renesas/sh7785lcr/Makefile deleted file mode 100644 index ba00657d7e..0000000000 --- a/board/renesas/sh7785lcr/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2008 Yoshihiro Shimoda -# - -obj-y := sh7785lcr.o selfcheck.o rtl8169_mac.o -extra-y += lowlevel_init.o diff --git a/board/renesas/sh7785lcr/README.sh7785lcr b/board/renesas/sh7785lcr/README.sh7785lcr deleted file mode 100644 index 56455fc162..0000000000 --- a/board/renesas/sh7785lcr/README.sh7785lcr +++ /dev/null @@ -1,123 +0,0 @@ -======================================== -Renesas Technology R0P7785LC0011RL board -======================================== - -This board specification: -========================= - -The R0P7785LC0011RL(board config name:sh7785lcr) has the following device: - - - SH7785 (SH-4A) - - DDR2-SDRAM 512MB - - NOR Flash 64MB - - 2D Graphic controller - - SATA controller - - Ethernet controller - - USB host/peripheral controller - - SD controller - - I2C controller - - RTC - -This board has 2 physical memory maps. It can be changed with DIP switch(S2-5). - - phys address | S2-5 = OFF | S2-5 = ON - -------------------------------+---------------+--------------- - 0x00000000 - 0x03ffffff(CS0) | NOR Flash | NOR Flash - 0x04000000 - 0x05ffffff(CS1) | PLD | PLD - 0x06000000 - 0x07ffffff(CS1) | reserved | I2C - 0x08000000 - 0x0bffffff(CS2) | USB | DDR SDRAM - 0x0c000000 - 0x0fffffff(CS3) | SD | DDR SDRAM - 0x10000000 - 0x13ffffff(CS4) | SM107 | SM107 - 0x14000000 - 0x17ffffff(CS5) | I2C | USB - 0x18000000 - 0x1bffffff(CS6) | reserved | SD - 0x40000000 - 0x5fffffff | DDR SDRAM | (cannot use) - - -configuration for This board: -============================= - -You can choose configuration as follows: - - - make sh7785lcr_config - - make sh7785lcr_32bit_config - -When you use "make sh7785lcr_config", there is build U-Boot for 29-bit -address mode. This mode can use 128MB DDR-SDRAM. - -When you use "make sh7785lcr_32bit_config", there is build U-Boot for 32-bit -extended address mode. This mode can use 384MB DDR-SDRAM. And if you run -"pmb" command, this mode can use 512MB DDR-SDRAM. - - * 32-bit extended address mode PMB mapping * - a) on start-up - virt | phys | size | device - -------------+---------------+---------------+--------------- - 0x88000000 | 0x48000000 | 384MB | DDR-SDRAM (Cacheable) - 0xa0000000 | 0x00000000 | 64MB | NOR Flash - 0xa4000000 | 0x04000000 | 16MB | PLD - 0xa6000000 | 0x08000000 | 16MB | USB - 0xa8000000 | 0x48000000 | 384MB | DDR-SDRAM (Non-cacheable) - - b) after "pmb" command - virt | phys | size | device - -------------+---------------+---------------+--------------- - 0x80000000 | 0x40000000 | 512MB | DDR-SDRAM (Cacheable) - 0xa0000000 | 0x40000000 | 512MB | DDR-SDRAM (Non-cacheable) - - -This board specific command: -============================ - -This board has the following its specific command: - - - hwtest - - printmac - - setmac - - pmb (sh7785lcr_32bit_config only) - - -1. hwtest - -This is self-check command. This command has the following options: - - - all : test all hardware - - pld : output PLD version - - led : turn on LEDs - - dipsw : test DIP switch - - sm107 : output SM107 version - - net : check RTL8110 ID - - sata : check SiI3512 ID - - net : output PCI slot device ID - -i.e) -=> hwtest led -turn on LEDs 3, 5, 7, 9 -turn on LEDs 4, 6, 8, 10 - -=> hwtest net -Ethernet OK - - -2. printmac - -This command outputs MAC address of this board. - -i.e) -=> printmac -MAC = 00:00:87:**:**:** - - -3. setmac - -This command writes MAC address of this board. - -i.e) -=> setmac 00:00:87:**:**:** - - -4. pmb - -This command change PMB for DDR-SDRAM all mapping. However you cannot use -NOR Flash and USB Host on U-Boot when you run this command. -i.e) -=> pmb diff --git a/board/renesas/sh7785lcr/lowlevel_init.S b/board/renesas/sh7785lcr/lowlevel_init.S deleted file mode 100644 index 658ebbaaeb..0000000000 --- a/board/renesas/sh7785lcr/lowlevel_init.S +++ /dev/null @@ -1,361 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2008 Yoshihiro Shimoda - */ -#include -#include -#include - -#include - - .global lowlevel_init - - .text - .align 2 - -lowlevel_init: - wait_timer WAIT_200US - wait_timer WAIT_200US - - /*------- LBSC -------*/ - write32 MMSELR_A, MMSELR_D - - /*------- DBSC2 -------*/ - write32 DBSC2_DBCONF_A, DBSC2_DBCONF_D - write32 DBSC2_DBTR0_A, DBSC2_DBTR0_D - write32 DBSC2_DBTR1_A, DBSC2_DBTR1_D - write32 DBSC2_DBTR2_A, DBSC2_DBTR2_D - write32 DBSC2_DBFREQ_A, DBSC2_DBFREQ_D1 - write32 DBSC2_DBFREQ_A, DBSC2_DBFREQ_D2 - wait_timer WAIT_200US - - write32 DBSC2_DBDICODTOCD_A, DBSC2_DBDICODTOCD_D - write32 DBSC2_DBCMDCNT_A, DBSC2_DBCMDCNT_D_CKE_H - wait_timer WAIT_200US - write32 DBSC2_DBCMDCNT_A, DBSC2_DBCMDCNT_D_PALL - write32 DBSC2_DBMRCNT_A, DBSC2_DBMRCNT_D_EMRS2 - write32 DBSC2_DBMRCNT_A, DBSC2_DBMRCNT_D_EMRS3 - write32 DBSC2_DBMRCNT_A, DBSC2_DBMRCNT_D_EMRS1_1 - write32 DBSC2_DBMRCNT_A, DBSC2_DBMRCNT_D_MRS_1 - write32 DBSC2_DBCMDCNT_A, DBSC2_DBCMDCNT_D_PALL - write32 DBSC2_DBCMDCNT_A, DBSC2_DBCMDCNT_D_REF - write32 DBSC2_DBCMDCNT_A, DBSC2_DBCMDCNT_D_REF - write32 DBSC2_DBMRCNT_A, DBSC2_DBMRCNT_D_MRS_2 - wait_timer WAIT_200US - - write32 DBSC2_DBMRCNT_A, DBSC2_DBMRCNT_D_EMRS1_2 - write32 DBSC2_DBMRCNT_A, DBSC2_DBMRCNT_D_EMRS1_1 - - write32 DBSC2_DBEN_A, DBSC2_DBEN_D - write32 DBSC2_DBRFCNT1_A, DBSC2_DBRFCNT1_D - write32 DBSC2_DBRFCNT2_A, DBSC2_DBRFCNT2_D - write32 DBSC2_DBRFCNT0_A, DBSC2_DBRFCNT0_D - wait_timer WAIT_200US - - /*------- GPIO -------*/ - write16 PACR_A, PXCR_D - write16 PBCR_A, PXCR_D - write16 PCCR_A, PXCR_D - write16 PDCR_A, PXCR_D - write16 PECR_A, PXCR_D - write16 PFCR_A, PXCR_D - write16 PGCR_A, PXCR_D - write16 PHCR_A, PHCR_D - write16 PJCR_A, PJCR_D - write16 PKCR_A, PKCR_D - write16 PLCR_A, PXCR_D - write16 PMCR_A, PMCR_D - write16 PNCR_A, PNCR_D - write16 PPCR_A, PXCR_D - write16 PQCR_A, PXCR_D - write16 PRCR_A, PXCR_D - - write8 PEPUPR_A, PEPUPR_D - write8 PHPUPR_A, PHPUPR_D - write8 PJPUPR_A, PJPUPR_D - write8 PKPUPR_A, PKPUPR_D - write8 PLPUPR_A, PLPUPR_D - write8 PMPUPR_A, PMPUPR_D - write8 PNPUPR_A, PNPUPR_D - write16 PPUPR1_A, PPUPR1_D - write16 PPUPR2_A, PPUPR2_D - write16 P1MSELR_A, P1MSELR_D - write16 P2MSELR_A, P2MSELR_D - - /*------- LBSC -------*/ - write32 BCR_A, BCR_D - write32 CS0BCR_A, CS0BCR_D - write32 CS0WCR_A, CS0WCR_D - write32 CS1BCR_A, CS1BCR_D - write32 CS1WCR_A, CS1WCR_D - write32 CS4BCR_A, CS4BCR_D - write32 CS4WCR_A, CS4WCR_D - - mov.l PASCR_A, r0 - mov.l @r0, r2 - mov.l PASCR_32BIT_MODE, r1 - tst r1, r2 - bt lbsc_29bit - - write32 CS2BCR_A, CS_USB_BCR_D - write32 CS2WCR_A, CS_USB_WCR_D - write32 CS3BCR_A, CS_SD_BCR_D - write32 CS3WCR_A, CS_SD_WCR_D - write32 CS5BCR_A, CS_I2C_BCR_D - write32 CS5WCR_A, CS_I2C_WCR_D - write32 CS6BCR_A, CS0BCR_D - write32 CS6WCR_A, CS0WCR_D - bra lbsc_end - nop - -lbsc_29bit: - write32 CS5BCR_A, CS_USB_BCR_D - write32 CS5WCR_A, CS_USB_WCR_D - write32 CS6BCR_A, CS_SD_BCR_D - write32 CS6WCR_A, CS_SD_WCR_D - -lbsc_end: -#if defined(CONFIG_SH_32BIT) - /*------- set PMB -------*/ - write32 PASCR_A, PASCR_29BIT_D - write32 MMUCR_A, MMUCR_D - - /***************************************************************** - * ent virt phys v sz c wt - * 0 0xa0000000 0x00000000 1 64M 0 0 - * 1 0xa4000000 0x04000000 1 16M 0 0 - * 2 0xa6000000 0x08000000 1 16M 0 0 - * 9 0x88000000 0x48000000 1 128M 1 1 - * 10 0x90000000 0x50000000 1 128M 1 1 - * 11 0x98000000 0x58000000 1 128M 1 1 - * 13 0xa8000000 0x48000000 1 128M 0 0 - * 14 0xb0000000 0x50000000 1 128M 0 0 - * 15 0xb8000000 0x58000000 1 128M 0 0 - */ - write32 PMB_ADDR_FLASH_A, PMB_ADDR_FLASH_D - write32 PMB_DATA_FLASH_A, PMB_DATA_FLASH_D - write32 PMB_ADDR_CPLD_A, PMB_ADDR_CPLD_D - write32 PMB_DATA_CPLD_A, PMB_DATA_CPLD_D - write32 PMB_ADDR_USB_A, PMB_ADDR_USB_D - write32 PMB_DATA_USB_A, PMB_DATA_USB_D - write32 PMB_ADDR_DDR_C1_A, PMB_ADDR_DDR_C1_D - write32 PMB_DATA_DDR_C1_A, PMB_DATA_DDR_C1_D - write32 PMB_ADDR_DDR_C2_A, PMB_ADDR_DDR_C2_D - write32 PMB_DATA_DDR_C2_A, PMB_DATA_DDR_C2_D - write32 PMB_ADDR_DDR_C3_A, PMB_ADDR_DDR_C3_D - write32 PMB_DATA_DDR_C3_A, PMB_DATA_DDR_C3_D - write32 PMB_ADDR_DDR_N1_A, PMB_ADDR_DDR_N1_D - write32 PMB_DATA_DDR_N1_A, PMB_DATA_DDR_N1_D - write32 PMB_ADDR_DDR_N2_A, PMB_ADDR_DDR_N2_D - write32 PMB_DATA_DDR_N2_A, PMB_DATA_DDR_N2_D - write32 PMB_ADDR_DDR_N3_A, PMB_ADDR_DDR_N3_D - write32 PMB_DATA_DDR_N3_A, PMB_DATA_DDR_N3_D - - write32 PASCR_A, PASCR_INIT - mov.l DUMMY_ADDR, r0 - icbi @r0 -#endif - - write32 CCR_A, CCR_D - - rts - nop - - .align 4 - -/*------- GPIO -------*/ -/* P{A,B C,D,E,F,G,L,P,Q,R}CR_D */ -PXCR_D: .word 0x0000 - -PHCR_D: .word 0x00c0 -PJCR_D: .word 0xc3fc -PKCR_D: .word 0x03ff -PMCR_D: .word 0xffff -PNCR_D: .word 0xf0c3 - -PEPUPR_D: .long 0xff -PHPUPR_D: .long 0x00 -PJPUPR_D: .long 0x00 -PKPUPR_D: .long 0x00 -PLPUPR_D: .long 0x00 -PMPUPR_D: .long 0xfc -PNPUPR_D: .long 0x00 -PPUPR1_D: .word 0xffbf -PPUPR2_D: .word 0xff00 -P1MSELR_D: .word 0x3780 -P2MSELR_D: .word 0x0000 - -#define GPIO_BASE 0xffe70000 -PACR_A: .long GPIO_BASE + 0x00 -PBCR_A: .long GPIO_BASE + 0x02 -PCCR_A: .long GPIO_BASE + 0x04 -PDCR_A: .long GPIO_BASE + 0x06 -PECR_A: .long GPIO_BASE + 0x08 -PFCR_A: .long GPIO_BASE + 0x0a -PGCR_A: .long GPIO_BASE + 0x0c -PHCR_A: .long GPIO_BASE + 0x0e -PJCR_A: .long GPIO_BASE + 0x10 -PKCR_A: .long GPIO_BASE + 0x12 -PLCR_A: .long GPIO_BASE + 0x14 -PMCR_A: .long GPIO_BASE + 0x16 -PNCR_A: .long GPIO_BASE + 0x18 -PPCR_A: .long GPIO_BASE + 0x1a -PQCR_A: .long GPIO_BASE + 0x1c -PRCR_A: .long GPIO_BASE + 0x1e -PEPUPR_A: .long GPIO_BASE + 0x48 -PHPUPR_A: .long GPIO_BASE + 0x4e -PJPUPR_A: .long GPIO_BASE + 0x50 -PKPUPR_A: .long GPIO_BASE + 0x52 -PLPUPR_A: .long GPIO_BASE + 0x54 -PMPUPR_A: .long GPIO_BASE + 0x56 -PNPUPR_A: .long GPIO_BASE + 0x58 -PPUPR1_A: .long GPIO_BASE + 0x60 -PPUPR2_A: .long GPIO_BASE + 0x62 -P1MSELR_A: .long GPIO_BASE + 0x80 -P2MSELR_A: .long GPIO_BASE + 0x82 - -MMSELR_A: .long 0xfc400020 -#if defined(CONFIG_SH_32BIT) -MMSELR_D: .long 0xa5a50005 -#else -MMSELR_D: .long 0xa5a50002 -#endif - -/*------- DBSC2 -------*/ -#define DBSC2_BASE 0xfe800000 -DBSC2_DBSTATE_A: .long DBSC2_BASE + 0x0c -DBSC2_DBEN_A: .long DBSC2_BASE + 0x10 -DBSC2_DBCMDCNT_A: .long DBSC2_BASE + 0x14 -DBSC2_DBCONF_A: .long DBSC2_BASE + 0x20 -DBSC2_DBTR0_A: .long DBSC2_BASE + 0x30 -DBSC2_DBTR1_A: .long DBSC2_BASE + 0x34 -DBSC2_DBTR2_A: .long DBSC2_BASE + 0x38 -DBSC2_DBRFCNT0_A: .long DBSC2_BASE + 0x40 -DBSC2_DBRFCNT1_A: .long DBSC2_BASE + 0x44 -DBSC2_DBRFCNT2_A: .long DBSC2_BASE + 0x48 -DBSC2_DBRFSTS_A: .long DBSC2_BASE + 0x4c -DBSC2_DBFREQ_A: .long DBSC2_BASE + 0x50 -DBSC2_DBDICODTOCD_A:.long DBSC2_BASE + 0x54 -DBSC2_DBMRCNT_A: .long DBSC2_BASE + 0x60 -DDR_DUMMY_ACCESS_A: .long 0x40000000 - -DBSC2_DBCONF_D: .long 0x00630002 -DBSC2_DBTR0_D: .long 0x050b1f04 -DBSC2_DBTR1_D: .long 0x00040204 -DBSC2_DBTR2_D: .long 0x02100308 -DBSC2_DBFREQ_D1: .long 0x00000000 -DBSC2_DBFREQ_D2: .long 0x00000100 -DBSC2_DBDICODTOCD_D:.long 0x000f0907 - -DBSC2_DBCMDCNT_D_CKE_H: .long 0x00000003 -DBSC2_DBCMDCNT_D_PALL: .long 0x00000002 -DBSC2_DBCMDCNT_D_REF: .long 0x00000004 - -DBSC2_DBMRCNT_D_EMRS2: .long 0x00020000 -DBSC2_DBMRCNT_D_EMRS3: .long 0x00030000 -DBSC2_DBMRCNT_D_EMRS1_1: .long 0x00010006 -DBSC2_DBMRCNT_D_EMRS1_2: .long 0x00010386 -DBSC2_DBMRCNT_D_MRS_1: .long 0x00000952 -DBSC2_DBMRCNT_D_MRS_2: .long 0x00000852 - -DBSC2_DBEN_D: .long 0x00000001 - -DBSC2_DBPDCNT0_D3: .long 0x00000080 -DBSC2_DBRFCNT1_D: .long 0x00000926 -DBSC2_DBRFCNT2_D: .long 0x00fe00fe -DBSC2_DBRFCNT0_D: .long 0x00010000 - -WAIT_200US: .long 33333 - -/*------- LBSC -------*/ -PASCR_A: .long 0xff000070 -PASCR_32BIT_MODE: .long 0x80000000 /* check booting mode */ - -BCR_A: .long BCR -CS0BCR_A: .long CS0BCR -CS0WCR_A: .long CS0WCR -CS1BCR_A: .long CS1BCR -CS1WCR_A: .long CS1WCR -CS2BCR_A: .long CS2BCR -CS2WCR_A: .long CS2WCR -CS3BCR_A: .long CS3BCR -CS3WCR_A: .long CS3WCR -CS4BCR_A: .long CS4BCR -CS4WCR_A: .long CS4WCR -CS5BCR_A: .long CS5BCR -CS5WCR_A: .long CS5WCR -CS6BCR_A: .long CS6BCR -CS6WCR_A: .long CS6WCR - -BCR_D: .long 0x80000003 -CS0BCR_D: .long 0x22222340 -CS0WCR_D: .long 0x00111118 -CS1BCR_D: .long 0x11111100 -CS1WCR_D: .long 0x33333303 -CS4BCR_D: .long 0x11111300 -CS4WCR_D: .long 0x00101012 - -/* USB setting : 32bit mode = CS2, 29bit mode = CS5 */ -CS_USB_BCR_D: .long 0x11111200 -CS_USB_WCR_D: .long 0x00020005 - -/* SD setting : 32bit mode = CS3, 29bit mode = CS6 */ -CS_SD_BCR_D: .long 0x00000300 -CS_SD_WCR_D: .long 0x00030108 - -/* I2C setting : 32bit mode = CS5, 29bit mode = CS1(already setting) */ -CS_I2C_BCR_D: .long 0x11111100 -CS_I2C_WCR_D: .long 0x00000003 - -#if defined(CONFIG_SH_32BIT) -/*------- set PMB -------*/ -PMB_ADDR_FLASH_A: .long PMB_ADDR_BASE(0) -PMB_ADDR_CPLD_A: .long PMB_ADDR_BASE(1) -PMB_ADDR_USB_A: .long PMB_ADDR_BASE(2) -PMB_ADDR_DDR_C1_A: .long PMB_ADDR_BASE(9) -PMB_ADDR_DDR_C2_A: .long PMB_ADDR_BASE(10) -PMB_ADDR_DDR_C3_A: .long PMB_ADDR_BASE(11) -PMB_ADDR_DDR_N1_A: .long PMB_ADDR_BASE(13) -PMB_ADDR_DDR_N2_A: .long PMB_ADDR_BASE(14) -PMB_ADDR_DDR_N3_A: .long PMB_ADDR_BASE(15) - -PMB_ADDR_FLASH_D: .long mk_pmb_addr_val(0xa0) -PMB_ADDR_CPLD_D: .long mk_pmb_addr_val(0xa4) -PMB_ADDR_USB_D: .long mk_pmb_addr_val(0xa6) -PMB_ADDR_DDR_C1_D: .long mk_pmb_addr_val(0x88) -PMB_ADDR_DDR_C2_D: .long mk_pmb_addr_val(0x90) -PMB_ADDR_DDR_C3_D: .long mk_pmb_addr_val(0x98) -PMB_ADDR_DDR_N1_D: .long mk_pmb_addr_val(0xa8) -PMB_ADDR_DDR_N2_D: .long mk_pmb_addr_val(0xb0) -PMB_ADDR_DDR_N3_D: .long mk_pmb_addr_val(0xb8) - -PMB_DATA_FLASH_A: .long PMB_DATA_BASE(0) -PMB_DATA_CPLD_A: .long PMB_DATA_BASE(1) -PMB_DATA_USB_A: .long PMB_DATA_BASE(2) -PMB_DATA_DDR_C1_A: .long PMB_DATA_BASE(9) -PMB_DATA_DDR_C2_A: .long PMB_DATA_BASE(10) -PMB_DATA_DDR_C3_A: .long PMB_DATA_BASE(11) -PMB_DATA_DDR_N1_A: .long PMB_DATA_BASE(13) -PMB_DATA_DDR_N2_A: .long PMB_DATA_BASE(14) -PMB_DATA_DDR_N3_A: .long PMB_DATA_BASE(15) - -/* ppn ub v s1 s0 c wt */ -PMB_DATA_FLASH_D: .long mk_pmb_data_val(0x00, 1, 1, 0, 1, 0, 1) -PMB_DATA_CPLD_D: .long mk_pmb_data_val(0x04, 1, 1, 0, 0, 0, 1) -PMB_DATA_USB_D: .long mk_pmb_data_val(0x08, 1, 1, 0, 0, 0, 1) -PMB_DATA_DDR_C1_D: .long mk_pmb_data_val(0x48, 0, 1, 1, 0, 1, 1) -PMB_DATA_DDR_C2_D: .long mk_pmb_data_val(0x50, 0, 1, 1, 0, 1, 1) -PMB_DATA_DDR_C3_D: .long mk_pmb_data_val(0x58, 0, 1, 1, 0, 1, 1) -PMB_DATA_DDR_N1_D: .long mk_pmb_data_val(0x48, 1, 1, 1, 0, 0, 1) -PMB_DATA_DDR_N2_D: .long mk_pmb_data_val(0x50, 1, 1, 1, 0, 0, 1) -PMB_DATA_DDR_N3_D: .long mk_pmb_data_val(0x58, 1, 1, 1, 0, 0, 1) - -DUMMY_ADDR: .long 0xa0000000 -PASCR_29BIT_D: .long 0x00000000 -PASCR_INIT: .long 0x80000080 /* check booting mode */ -MMUCR_A: .long 0xff000010 -MMUCR_D: .long 0x00000004 /* clear ITLB */ -#endif /* CONFIG_SH_32BIT */ - -CCR_A: .long 0xff00001c -CCR_D: .long 0x0000090b diff --git a/board/renesas/sh7785lcr/rtl8169.h b/board/renesas/sh7785lcr/rtl8169.h deleted file mode 100644 index 51240e6d62..0000000000 --- a/board/renesas/sh7785lcr/rtl8169.h +++ /dev/null @@ -1,43 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2008 Yoshihiro Shimoda - */ - -#define PCIREG_8(_adr) (*(volatile unsigned char *)(_adr)) -#define PCIREG_32(_adr) (*(volatile unsigned long *)(_adr)) -#define PCI_PAR PCIREG_32(0xfe0401c0) -#define PCI_PDR PCIREG_32(0xfe040220) -#define PCI_CR PCIREG_32(0xfe040100) -#define PCI_CONF1 PCIREG_32(0xfe040004) - -#define HIGH 1 -#define LOW 0 - -#define PCI_PROG 0x80 -#define PCI_EEP_ADDRESS (unsigned short)0x0007 -#define PCI_MAC_ADDRESS_SIZE 3 - -#define TIME1 100 -#define TIME2 20000 - -#define BIT_DUMMY 0 -#define MAC_EEP_READ 1 -#define MAC_EEP_WRITE 2 -#define MAC_EEP_ERACE 3 -#define MAC_EEP_EWEN 4 -#define MAC_EEP_EWDS 5 - -/* RTL8169 */ -const unsigned short EEPROM_W_Data_8169_A[] = { - 0x8129, 0x10ec, 0x8169, 0x1154, 0x032b, - 0x4020, 0xa101 -}; -const unsigned short EEPROM_W_Data_8169_B[] = { - 0x4d15, 0xf7c2, 0x8000, 0x0000, 0x0000, 0x1300, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x2000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000 -}; diff --git a/board/renesas/sh7785lcr/rtl8169_mac.c b/board/renesas/sh7785lcr/rtl8169_mac.c deleted file mode 100644 index 68c324113f..0000000000 --- a/board/renesas/sh7785lcr/rtl8169_mac.c +++ /dev/null @@ -1,330 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2008 Yoshihiro Shimoda - */ - -#include -#include "rtl8169.h" - -static unsigned char *PCI_MEMR; - -static void mac_delay(unsigned int cnt) -{ - udelay(cnt); -} - -static void mac_pci_setup(void) -{ - unsigned long pci_data; - - PCI_PAR = 0x00000010; - PCI_PDR = 0x00001000; - PCI_PAR = 0x00000004; - pci_data = PCI_PDR; - PCI_PDR = pci_data | 0x00000007; - PCI_PAR = 0x00000010; - - PCI_MEMR = (unsigned char *)((PCI_PDR | 0xFE240050) & 0xFFFFFFF0); -} - -static void EECS(int level) -{ - unsigned char data = *PCI_MEMR; - - if (level) - *PCI_MEMR = data | 0x08; - else - *PCI_MEMR = data & 0xf7; -} - -static void EECLK(int level) -{ - unsigned char data = *PCI_MEMR; - - if (level) - *PCI_MEMR = data | 0x04; - else - *PCI_MEMR = data & 0xfb; -} - -static void EEDI(int level) -{ - unsigned char data = *PCI_MEMR; - - if (level) - *PCI_MEMR = data | 0x02; - else - *PCI_MEMR = data & 0xfd; -} - -static inline void sh7785lcr_bitset(unsigned short bit) -{ - if (bit) - EEDI(HIGH); - else - EEDI(LOW); - - EECLK(LOW); - mac_delay(TIME1); - EECLK(HIGH); - mac_delay(TIME1); - EEDI(LOW); -} - -static inline unsigned char sh7785lcr_bitget(void) -{ - unsigned char bit; - - EECLK(LOW); - mac_delay(TIME1); - bit = *PCI_MEMR & 0x01; - EECLK(HIGH); - mac_delay(TIME1); - - return bit; -} - -static inline void sh7785lcr_setcmd(unsigned char command) -{ - sh7785lcr_bitset(BIT_DUMMY); - switch (command) { - case MAC_EEP_READ: - sh7785lcr_bitset(1); - sh7785lcr_bitset(1); - sh7785lcr_bitset(0); - break; - case MAC_EEP_WRITE: - sh7785lcr_bitset(1); - sh7785lcr_bitset(0); - sh7785lcr_bitset(1); - break; - case MAC_EEP_ERACE: - sh7785lcr_bitset(1); - sh7785lcr_bitset(1); - sh7785lcr_bitset(1); - break; - case MAC_EEP_EWEN: - sh7785lcr_bitset(1); - sh7785lcr_bitset(0); - sh7785lcr_bitset(0); - break; - case MAC_EEP_EWDS: - sh7785lcr_bitset(1); - sh7785lcr_bitset(0); - sh7785lcr_bitset(0); - break; - default: - break; - } -} - -static inline unsigned short sh7785lcr_getdt(void) -{ - unsigned short data = 0; - int i; - - sh7785lcr_bitget(); /* DUMMY */ - for (i = 0 ; i < 16 ; i++) { - data <<= 1; - data |= sh7785lcr_bitget(); - } - return data; -} - -static inline void sh7785lcr_setadd(unsigned short address) -{ - sh7785lcr_bitset(address & 0x0020); /* A5 */ - sh7785lcr_bitset(address & 0x0010); /* A4 */ - sh7785lcr_bitset(address & 0x0008); /* A3 */ - sh7785lcr_bitset(address & 0x0004); /* A2 */ - sh7785lcr_bitset(address & 0x0002); /* A1 */ - sh7785lcr_bitset(address & 0x0001); /* A0 */ -} - -static inline void sh7785lcr_setdata(unsigned short data) -{ - sh7785lcr_bitset(data & 0x8000); - sh7785lcr_bitset(data & 0x4000); - sh7785lcr_bitset(data & 0x2000); - sh7785lcr_bitset(data & 0x1000); - sh7785lcr_bitset(data & 0x0800); - sh7785lcr_bitset(data & 0x0400); - sh7785lcr_bitset(data & 0x0200); - sh7785lcr_bitset(data & 0x0100); - sh7785lcr_bitset(data & 0x0080); - sh7785lcr_bitset(data & 0x0040); - sh7785lcr_bitset(data & 0x0020); - sh7785lcr_bitset(data & 0x0010); - sh7785lcr_bitset(data & 0x0008); - sh7785lcr_bitset(data & 0x0004); - sh7785lcr_bitset(data & 0x0002); - sh7785lcr_bitset(data & 0x0001); -} - -static void sh7785lcr_datawrite(const unsigned short *data, unsigned short address, - unsigned int count) -{ - unsigned int i; - - for (i = 0; i < count; i++) { - EECS(HIGH); - EEDI(LOW); - mac_delay(TIME1); - - sh7785lcr_setcmd(MAC_EEP_WRITE); - sh7785lcr_setadd(address++); - sh7785lcr_setdata(*(data + i)); - - EECLK(LOW); - EEDI(LOW); - EECS(LOW); - mac_delay(TIME2); - } -} - -static void sh7785lcr_macerase(void) -{ - unsigned int i; - unsigned short pci_address = 7; - - for (i = 0; i < 3; i++) { - EECS(HIGH); - EEDI(LOW); - mac_delay(TIME1); - sh7785lcr_setcmd(MAC_EEP_ERACE); - sh7785lcr_setadd(pci_address++); - mac_delay(TIME1); - EECLK(LOW); - EEDI(LOW); - EECS(LOW); - } - - mac_delay(TIME2); - - printf("\n\nErace End\n"); - for (i = 0; i < 10; i++) - mac_delay(TIME2); -} - -static void sh7785lcr_macwrite(unsigned short *data) -{ - sh7785lcr_macerase(); - - sh7785lcr_datawrite(EEPROM_W_Data_8169_A, 0x0000, 7); - sh7785lcr_datawrite(data, PCI_EEP_ADDRESS, PCI_MAC_ADDRESS_SIZE); - sh7785lcr_datawrite(EEPROM_W_Data_8169_B, 0x000a, 54); -} - -void sh7785lcr_macdtrd(unsigned char *buf, unsigned short address, unsigned int count) -{ - unsigned int i; - unsigned short wk; - - for (i = 0 ; i < count; i++) { - EECS(HIGH); - EEDI(LOW); - mac_delay(TIME1); - sh7785lcr_setcmd(MAC_EEP_READ); - sh7785lcr_setadd(address++); - wk = sh7785lcr_getdt(); - - *buf++ = (unsigned char)(wk & 0xff); - *buf++ = (unsigned char)((wk >> 8) & 0xff); - EECLK(LOW); - EEDI(LOW); - EECS(LOW); - } -} - -static void sh7785lcr_macadrd(unsigned char *buf) -{ - *PCI_MEMR = PCI_PROG; - - sh7785lcr_macdtrd(buf, PCI_EEP_ADDRESS, PCI_MAC_ADDRESS_SIZE); -} - -static void sh7785lcr_eepewen(void) -{ - *PCI_MEMR = PCI_PROG; - mac_delay(TIME1); - EECS(LOW); - EECLK(LOW); - EEDI(LOW); - EECS(HIGH); - mac_delay(TIME1); - - sh7785lcr_setcmd(MAC_EEP_EWEN); - sh7785lcr_bitset(1); - sh7785lcr_bitset(1); - sh7785lcr_bitset(BIT_DUMMY); - sh7785lcr_bitset(BIT_DUMMY); - sh7785lcr_bitset(BIT_DUMMY); - sh7785lcr_bitset(BIT_DUMMY); - - EECLK(LOW); - EEDI(LOW); - EECS(LOW); - mac_delay(TIME1); -} - -void mac_write(unsigned short *data) -{ - mac_pci_setup(); - sh7785lcr_eepewen(); - sh7785lcr_macwrite(data); -} - -void mac_read(void) -{ - unsigned char data[6]; - - mac_pci_setup(); - sh7785lcr_macadrd(data); - printf("Mac = %02x:%02x:%02x:%02x:%02x:%02x\n", - data[0], data[1], data[2], data[3], data[4], data[5]); -} - -int do_set_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - int i; - unsigned char mac[6]; - char *s, *e; - - if (argc != 2) - return cmd_usage(cmdtp); - - s = argv[1]; - - for (i = 0; i < 6; i++) { - mac[i] = s ? simple_strtoul(s, &e, 16) : 0; - if (s) - s = (*e) ? e + 1 : e; - } - mac_write((unsigned short *)mac); - - return 0; -} - -U_BOOT_CMD( - setmac, 2, 1, do_set_mac, - "write MAC address for RTL8110SCL", - "\n" - "setmac - write MAC address for RTL8110SCL" -); - -int do_print_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - if (argc != 1) - return cmd_usage(cmdtp); - - mac_read(); - - return 0; -} - -U_BOOT_CMD( - printmac, 1, 1, do_print_mac, - "print MAC address for RTL8110", - "\n" - " - print MAC address for RTL8110" -); diff --git a/board/renesas/sh7785lcr/selfcheck.c b/board/renesas/sh7785lcr/selfcheck.c deleted file mode 100644 index c5f469342d..0000000000 --- a/board/renesas/sh7785lcr/selfcheck.c +++ /dev/null @@ -1,150 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2008 Yoshihiro Shimoda - */ - -#include -#include -#include -#include -#include - -#if defined(CONFIG_CPU_32BIT) -#define NOCACHE_OFFSET 0x00000000 -#else -#define NOCACHE_OFFSET 0xa0000000 -#endif -#define PLD_LEDCR (0x04000008 + NOCACHE_OFFSET) -#define PLD_SWSR (0x0400000a + NOCACHE_OFFSET) -#define PLD_VERSR (0x0400000c + NOCACHE_OFFSET) - -#define SM107_DEVICEID (0x13e00060 + NOCACHE_OFFSET) - -static void test_pld(void) -{ - printf("PLD version = %04x\n", readb(PLD_VERSR)); -} - -static void test_sm107(void) -{ - printf("SM107 device ID = %04x\n", readl(SM107_DEVICEID)); -} - -static void test_led(void) -{ - printf("turn on LEDs 3, 5, 7, 9\n"); - writeb(0x55, PLD_LEDCR); - mdelay(2000); - printf("turn on LEDs 4, 6, 8, 10\n"); - writeb(0xaa, PLD_LEDCR); - mdelay(2000); - writeb(0x00, PLD_LEDCR); -} - -static void test_dipsw(void) -{ - printf("Please DIPSW set = B'0101\n"); - while (readb(PLD_SWSR) != 0x05) { - if (ctrlc()) - return; - } - printf("Please DIPSW set = B'1010\n"); - while (readb(PLD_SWSR) != 0x0A) { - if (ctrlc()) - return; - } - printf("DIPSW OK\n"); -} - -static void test_net(void) -{ - unsigned long data; - - writel(0x80000000, 0xfe0401c0); - data = readl(0xfe040220); - if (data == 0x816910ec) - printf("Ethernet OK\n"); - else - printf("Ethernet NG, data = %08x\n", (unsigned int)data); -} - -static void test_sata(void) -{ - unsigned long data; - - writel(0x80000800, 0xfe0401c0); - data = readl(0xfe040220); - if (data == 0x35121095) - printf("SATA OK\n"); - else - printf("SATA NG, data = %08x\n", (unsigned int)data); -} - -static void test_pci(void) -{ - writel(0x80001800, 0xfe0401c0); - printf("PCI CN1 ID = %08x\n", readl(0xfe040220)); - - writel(0x80001000, 0xfe0401c0); - printf("PCI CN2 ID = %08x\n", readl(0xfe040220)); -} - -int do_hw_test(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - char *cmd; - - if (argc != 2) - return cmd_usage(cmdtp); - - cmd = argv[1]; - switch (cmd[0]) { - case 'a': /* all */ - test_pld(); - test_led(); - test_dipsw(); - test_sm107(); - test_net(); - test_sata(); - test_pci(); - break; - case 'p': /* pld or pci */ - if (cmd[1] == 'l') - test_pld(); - else - test_pci(); - break; - case 'l': /* led */ - test_led(); - break; - case 'd': /* dipsw */ - test_dipsw(); - break; - case 's': /* sm107 or sata */ - if (cmd[1] == 'm') - test_sm107(); - else - test_sata(); - break; - case 'n': /* net */ - test_net(); - break; - default: - return cmd_usage(cmdtp); - } - - return 0; -} - -U_BOOT_CMD( - hwtest, 2, 1, do_hw_test, - "hardware test for R0P7785LC0011RL board", - "\n" - "hwtest all - test all hardware\n" - "hwtest pld - output PLD version\n" - "hwtest led - turn on LEDs\n" - "hwtest dipsw - test DIP switch\n" - "hwtest sm107 - output SM107 version\n" - "hwtest net - check RTL8110 ID\n" - "hwtest sata - check SiI3512 ID\n" - "hwtest pci - output PCI slot device ID" -); diff --git a/board/renesas/sh7785lcr/sh7785lcr.c b/board/renesas/sh7785lcr/sh7785lcr.c deleted file mode 100644 index 1874334814..0000000000 --- a/board/renesas/sh7785lcr/sh7785lcr.c +++ /dev/null @@ -1,63 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2008 Yoshihiro Shimoda - */ - -#include -#include -#include -#include -#include - -int checkboard(void) -{ - puts("BOARD: Renesas Technology Corp. R0P7785LC0011RL\n"); - return 0; -} - -int board_init(void) -{ - return 0; -} - -static struct pci_controller hose; -void pci_init_board(void) -{ - pci_sh7780_init(&hose); -} - -int board_eth_init(bd_t *bis) -{ - return pci_eth_init(bis); -} - -#if defined(CONFIG_SH_32BIT) -int do_pmb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - /* clear ITLB */ - writel(0x00000004, 0xff000010); - - /* delete PMB for peripheral */ - writel(0, PMB_ADDR_BASE(0)); - writel(0, PMB_DATA_BASE(0)); - writel(0, PMB_ADDR_BASE(1)); - writel(0, PMB_DATA_BASE(1)); - writel(0, PMB_ADDR_BASE(2)); - writel(0, PMB_DATA_BASE(2)); - - /* add PMB for SDRAM(0x40000000 - 0x47ffffff) */ - writel(mk_pmb_addr_val(0x80), PMB_ADDR_BASE(8)); - writel(mk_pmb_data_val(0x40, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(8)); - writel(mk_pmb_addr_val(0xa0), PMB_ADDR_BASE(12)); - writel(mk_pmb_data_val(0x40, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(12)); - - return 0; -} - -U_BOOT_CMD( - pmb, 1, 1, do_pmb, - "pmb - PMB setting\n", - "\n" - " - PMB setting for all SDRAM mapping" -); -#endif diff --git a/configs/sh7785lcr_32bit_defconfig b/configs/sh7785lcr_32bit_defconfig deleted file mode 100644 index b520be5c37..0000000000 --- a/configs/sh7785lcr_32bit_defconfig +++ /dev/null @@ -1,40 +0,0 @@ -CONFIG_SH=y -CONFIG_SYS_TEXT_BASE=0x8FF80000 -CONFIG_SH_32BIT=y -CONFIG_TARGET_SH7785LCR=y -CONFIG_BOOTDELAY=3 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttySC1,115200 root=/dev/nfs ip=dhcp" -CONFIG_VERSION_VARIABLE=y -# CONFIG_CMDLINE_EDITING is not set -# CONFIG_AUTO_COMPLETE is not set -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_CONSOLE is not set -# CONFIG_CMD_BOOTD is not set -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_XIMG is not set -# CONFIG_CMD_EDITENV is not set -# CONFIG_CMD_ENV_EXISTS is not set -# CONFIG_CMD_LOADB is not set -# CONFIG_CMD_LOADS is not set -CONFIG_CMD_PCI=y -CONFIG_CMD_SDRAM=y -CONFIG_CMD_USB=y -# CONFIG_CMD_ECHO is not set -# CONFIG_CMD_ITEST is not set -# CONFIG_CMD_SOURCE is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_PING=y -# CONFIG_CMD_MISC is not set -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_MAC_PARTITION=y -CONFIG_ENV_IS_IN_FLASH=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_PCI=y -CONFIG_SCIF_CONSOLE=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/sh7785lcr_defconfig b/configs/sh7785lcr_defconfig deleted file mode 100644 index d48ba73346..0000000000 --- a/configs/sh7785lcr_defconfig +++ /dev/null @@ -1,39 +0,0 @@ -CONFIG_SH=y -CONFIG_SYS_TEXT_BASE=0x0FF80000 -CONFIG_TARGET_SH7785LCR=y -CONFIG_BOOTDELAY=3 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttySC1,115200 root=/dev/nfs ip=dhcp" -CONFIG_VERSION_VARIABLE=y -# CONFIG_CMDLINE_EDITING is not set -# CONFIG_AUTO_COMPLETE is not set -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_CONSOLE is not set -# CONFIG_CMD_BOOTD is not set -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_XIMG is not set -# CONFIG_CMD_EDITENV is not set -# CONFIG_CMD_ENV_EXISTS is not set -# CONFIG_CMD_LOADB is not set -# CONFIG_CMD_LOADS is not set -CONFIG_CMD_PCI=y -CONFIG_CMD_SDRAM=y -CONFIG_CMD_USB=y -# CONFIG_CMD_ECHO is not set -# CONFIG_CMD_ITEST is not set -# CONFIG_CMD_SOURCE is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_PING=y -# CONFIG_CMD_MISC is not set -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_MAC_PARTITION=y -CONFIG_ENV_IS_IN_FLASH=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_PCI=y -CONFIG_SCIF_CONSOLE=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/include/configs/sh7785lcr.h b/include/configs/sh7785lcr.h deleted file mode 100644 index f27f665fb6..0000000000 --- a/include/configs/sh7785lcr.h +++ /dev/null @@ -1,128 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuation settings for the Renesas Technology R0P7785LC0011RL board - * - * Copyright (C) 2008 Yoshihiro Shimoda - */ - -#ifndef __SH7785LCR_H -#define __SH7785LCR_H - -#define CONFIG_CPU_SH7785 1 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "bootdevice=0:1\0" \ - "usbload=usb reset;usbboot;usb stop;bootm\0" - -#define CONFIG_DISPLAY_BOARDINFO -#undef CONFIG_SHOW_BOOT_PROGRESS - -/* MEMORY */ -#if defined(CONFIG_SH_32BIT) -/* 0x40000000 - 0x47FFFFFF does not use */ -#define CONFIG_SH_SDRAM_OFFSET (0x8000000) -#define SH7785LCR_SDRAM_PHYS_BASE (0x40000000 + CONFIG_SH_SDRAM_OFFSET) -#define SH7785LCR_SDRAM_BASE (0x80000000 + CONFIG_SH_SDRAM_OFFSET) -#define SH7785LCR_SDRAM_SIZE (384 * 1024 * 1024) -#define SH7785LCR_FLASH_BASE_1 (0xa0000000) -#define SH7785LCR_FLASH_BANK_SIZE (64 * 1024 * 1024) -#define SH7785LCR_USB_BASE (0xa6000000) -#else -#define SH7785LCR_SDRAM_BASE (0x08000000) -#define SH7785LCR_SDRAM_SIZE (128 * 1024 * 1024) -#define SH7785LCR_FLASH_BASE_1 (0xa0000000) -#define SH7785LCR_FLASH_BANK_SIZE (64 * 1024 * 1024) -#define SH7785LCR_USB_BASE (0xb4000000) -#endif - -#define CONFIG_SYS_PBSIZE 256 -#define CONFIG_SYS_BAUDRATE_TABLE { 115200 } - -/* SCIF */ -#define CONFIG_CONS_SCIF1 1 -#define CONFIG_SCIF_EXT_CLOCK 1 - -#define CONFIG_SYS_MEMTEST_START (SH7785LCR_SDRAM_BASE) -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ - (SH7785LCR_SDRAM_SIZE) - \ - 4 * 1024 * 1024) -#undef CONFIG_SYS_MEMTEST_SCRATCH -#undef CONFIG_SYS_LOADS_BAUD_CHANGE - -#define CONFIG_SYS_SDRAM_BASE (SH7785LCR_SDRAM_BASE) -#define CONFIG_SYS_SDRAM_SIZE (SH7785LCR_SDRAM_SIZE) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024) - -#define CONFIG_SYS_MONITOR_BASE (SH7785LCR_FLASH_BASE_1) -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_MALLOC_LEN (512 * 1024) -#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) - -/* FLASH */ -#undef CONFIG_SYS_FLASH_QUIET_TEST -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_BASE (SH7785LCR_FLASH_BASE_1) -#define CONFIG_SYS_MAX_FLASH_SECT 512 - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE + \ - (0 * SH7785LCR_FLASH_BANK_SIZE) } - -#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000) -#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000) -#define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000) -#define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000) - -#undef CONFIG_SYS_DIRECT_FLASH_TFTP - -/* R8A66597 */ -#define CONFIG_USB_R8A66597_HCD -#define CONFIG_R8A66597_BASE_ADDR SH7785LCR_USB_BASE -#define CONFIG_R8A66597_XTAL 0x0000 /* 12MHz */ -#define CONFIG_R8A66597_LDRV 0x8000 /* 3.3V */ -#define CONFIG_R8A66597_ENDIAN 0x0000 /* little */ - -/* PCI Controller */ -#define CONFIG_SH4_PCI -#define CONFIG_SH7780_PCI -#if defined(CONFIG_SH_32BIT) -#define CONFIG_SH7780_PCI_LSR 0x1ff00001 -#define CONFIG_SH7780_PCI_LAR 0x5f000000 -#define CONFIG_SH7780_PCI_BAR 0x5f000000 -#else -#define CONFIG_SH7780_PCI_LSR 0x07f00001 -#define CONFIG_SH7780_PCI_LAR CONFIG_SYS_SDRAM_SIZE -#define CONFIG_SH7780_PCI_BAR CONFIG_SYS_SDRAM_SIZE -#endif -#define CONFIG_PCI_SCAN_SHOW 1 - -#define CONFIG_PCI_MEM_BUS 0xFD000000 /* Memory space base addr */ -#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS -#define CONFIG_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */ - -#define CONFIG_PCI_IO_BUS 0xFE200000 /* IO space base address */ -#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS -#define CONFIG_PCI_IO_SIZE 0x00200000 /* Size of IO window */ - -#if defined(CONFIG_SH_32BIT) -#define CONFIG_PCI_SYS_PHYS SH7785LCR_SDRAM_PHYS_BASE -#else -#define CONFIG_PCI_SYS_PHYS CONFIG_SYS_SDRAM_BASE -#endif -#define CONFIG_PCI_SYS_BUS CONFIG_SYS_SDRAM_BASE -#define CONFIG_PCI_SYS_SIZE CONFIG_SYS_SDRAM_SIZE - -/* ENV setting */ -#define CONFIG_ENV_OVERWRITE 1 -#define CONFIG_ENV_SECT_SIZE (256 * 1024) -#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE) - -/* Board Clock */ -/* The SCIF used external clock. system clock only used timer. */ -#define CONFIG_SYS_CLK_FREQ 50000000 -#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ - -#endif /* __SH7785LCR_H */