From: B, Ravi Date: Thu, 28 Jul 2016 12:09:15 +0000 (+0530) Subject: common: dfu: saperate the dfu common functionality X-Git-Tag: v2016.11-rc1~29^2~12 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=05341a87646aceac90a63624fbd5fa620f8dc263;p=oweals%2Fu-boot.git common: dfu: saperate the dfu common functionality The cmd_dfu functionality is been used by both SPL and u-boot, saperating the core dfu functionality moving it to common/dfu.c. Signed-off-by: Ravi Babu Reviewed-by: Tom Rini --- diff --git a/cmd/dfu.c b/cmd/dfu.c index d8aae26223..04291f6c08 100644 --- a/cmd/dfu.c +++ b/cmd/dfu.c @@ -21,7 +21,6 @@ static int do_dfu(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - bool dfu_reset = false; if (argc < 4) return CMD_RET_USAGE; @@ -30,7 +29,7 @@ static int do_dfu(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) char *interface = argv[2]; char *devstring = argv[3]; - int ret, i = 0; + int ret; #ifdef CONFIG_DFU_TFTP unsigned long addr = 0; if (!strcmp(argv[1], "tftp")) { @@ -52,67 +51,11 @@ static int do_dfu(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } int controller_index = simple_strtoul(usb_controller, NULL, 0); - board_usb_init(controller_index, USB_INIT_DEVICE); - g_dnl_clear_detach(); - g_dnl_register("usb_dnl_dfu"); - while (1) { - if (g_dnl_detach()) { - /* - * Check if USB bus reset is performed after detach, - * which indicates that -R switch has been passed to - * dfu-util. In this case reboot the device - */ - if (dfu_usb_get_reset()) { - dfu_reset = true; - goto exit; - } - /* - * This extra number of usb_gadget_handle_interrupts() - * calls is necessary to assure correct transmission - * completion with dfu-util - */ - if (++i == 10000) - goto exit; - } + run_usb_dnl_gadget(controller_index, "usb_dnl_dfu"); - if (ctrlc()) - goto exit; - - if (dfu_get_defer_flush()) { - /* - * Call to usb_gadget_handle_interrupts() is necessary - * to act on ZLP OUT transaction from HOST PC after - * transmitting the whole file. - * - * If this ZLP OUT packet is NAK'ed, the HOST libusb - * function fails after timeout (by default it is set to - * 5 seconds). In such situation the dfu-util program - * exits with error message. - */ - usb_gadget_handle_interrupts(controller_index); - ret = dfu_flush(dfu_get_defer_flush(), NULL, 0, 0); - dfu_set_defer_flush(NULL); - if (ret) { - error("Deferred dfu_flush() failed!"); - goto exit; - } - } - - WATCHDOG_RESET(); - usb_gadget_handle_interrupts(controller_index); - } -exit: - g_dnl_unregister(); - board_usb_cleanup(controller_index, USB_INIT_DEVICE); done: dfu_free_entities(); - - if (dfu_reset) - run_command("reset", 0); - - g_dnl_clear_detach(); - return ret; } diff --git a/common/Makefile b/common/Makefile index 6b4456edff..ecc23e6fd3 100644 --- a/common/Makefile +++ b/common/Makefile @@ -89,6 +89,7 @@ obj-$(CONFIG_USB_KEYBOARD) += usb_kbd.o endif # !CONFIG_SPL_BUILD ifdef CONFIG_SPL_BUILD +obj-$(CONFIG_SPL_DFU_SUPPORT) += dfu.o obj-$(CONFIG_SPL_DFU_SUPPORT) += cli_hush.o obj-$(CONFIG_SPL_HASH_SUPPORT) += hash.o obj-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o @@ -172,6 +173,7 @@ obj-$(CONFIG_CMDLINE) += cli_simple.o obj-y += cli.o obj-$(CONFIG_CMDLINE) += cli_readline.o +obj-$(CONFIG_CMD_DFU) += dfu.o obj-y += command.o obj-y += s_record.o obj-y += xyzModem.o diff --git a/common/dfu.c b/common/dfu.c new file mode 100644 index 0000000000..14b60f1fbb --- /dev/null +++ b/common/dfu.c @@ -0,0 +1,87 @@ +/* + * dfu.c -- dfu command + * + * Copyright (C) 2015 + * Lukasz Majewski + * + * Copyright (C) 2012 Samsung Electronics + * authors: Andrzej Pietrasiewicz + * Lukasz Majewski + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include + +int run_usb_dnl_gadget(int usbctrl_index, char *usb_dnl_gadget) +{ + bool dfu_reset = false; + int ret, i = 0; + + board_usb_init(usbctrl_index, USB_INIT_DEVICE); + g_dnl_clear_detach(); + g_dnl_register(usb_dnl_gadget); + while (1) { + if (g_dnl_detach()) { + /* + * Check if USB bus reset is performed after detach, + * which indicates that -R switch has been passed to + * dfu-util. In this case reboot the device + */ + if (dfu_usb_get_reset()) { + dfu_reset = true; + goto exit; + } + + /* + * This extra number of usb_gadget_handle_interrupts() + * calls is necessary to assure correct transmission + * completion with dfu-util + */ + if (++i == 10000) + goto exit; + } + + if (ctrlc()) + goto exit; + + if (dfu_get_defer_flush()) { + /* + * Call to usb_gadget_handle_interrupts() is necessary + * to act on ZLP OUT transaction from HOST PC after + * transmitting the whole file. + * + * If this ZLP OUT packet is NAK'ed, the HOST libusb + * function fails after timeout (by default it is set to + * 5 seconds). In such situation the dfu-util program + * exits with error message. + */ + usb_gadget_handle_interrupts(usbctrl_index); + ret = dfu_flush(dfu_get_defer_flush(), NULL, 0, 0); + dfu_set_defer_flush(NULL); + if (ret) { + error("Deferred dfu_flush() failed!"); + goto exit; + } + } + + WATCHDOG_RESET(); + usb_gadget_handle_interrupts(usbctrl_index); + } +exit: + g_dnl_unregister(); + board_usb_cleanup(usbctrl_index, USB_INIT_DEVICE); + + if (dfu_reset) + run_command("reset", 0); + + g_dnl_clear_detach(); + + return ret; +} diff --git a/include/g_dnl.h b/include/g_dnl.h index ba49f1f5cb..bd29a9f83a 100644 --- a/include/g_dnl.h +++ b/include/g_dnl.h @@ -43,5 +43,6 @@ void g_dnl_set_serialnumber(char *); bool g_dnl_detach(void); void g_dnl_trigger_detach(void); void g_dnl_clear_detach(void); +int run_usb_dnl_gadget(int usbctrl_index, char *usb_dnl_gadget); #endif /* __G_DOWNLOAD_H_ */