From: Claudiu Beznea Date: Mon, 25 Mar 2019 10:33:56 +0000 (+0000) Subject: pinctrl: at91: add option to use drive strength bits X-Git-Tag: v2019.07-rc1~36^2~4 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=04d4ec9c575b1b64478fcd4034ffb0be9e026802;p=oweals%2Fu-boot.git pinctrl: at91: add option to use drive strength bits SAM9X60 uses high and low drive strengths. To implement this, in at91_pinctrl_mux_ops::set_drivestrength we need bit numbers of drive strengths (1 for low, 2 for high), thus change the code to allow the usage of drive strength bit numbers. Signed-off-by: Claudiu Beznea --- diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c index 4bdad62dc9..8997732376 100644 --- a/drivers/pinctrl/pinctrl-at91.c +++ b/drivers/pinctrl/pinctrl-at91.c @@ -50,10 +50,15 @@ struct at91_pinctrl_priv { * DRIVE_STRENGTH_DEFAULT is just a placeholder to avoid changing the drive * strength when there is no dt config for it. */ -#define DRIVE_STRENGTH_DEFAULT (0 << DRIVE_STRENGTH_SHIFT) -#define DRIVE_STRENGTH_LOW (1 << DRIVE_STRENGTH_SHIFT) -#define DRIVE_STRENGTH_MED (2 << DRIVE_STRENGTH_SHIFT) -#define DRIVE_STRENGTH_HI (3 << DRIVE_STRENGTH_SHIFT) +enum drive_strength_bit { + DRIVE_STRENGTH_BIT_DEF, + DRIVE_STRENGTH_BIT_LOW, + DRIVE_STRENGTH_BIT_MED, + DRIVE_STRENGTH_BIT_HI, +}; + +#define DRIVE_STRENGTH_BIT_MSK(name) (DRIVE_STRENGTH_BIT_##name << \ + DRIVE_STRENGTH_SHIFT) enum at91_mux { AT91_MUX_GPIO = 0, @@ -238,7 +243,7 @@ static void at91_mux_sam9x5_set_drivestrength(struct at91_port *pio, /* strength is inverse on SAM9x5s with our defines * 0 = hi, 1 = med, 2 = low, 3 = rsvd */ - setting = DRIVE_STRENGTH_HI - setting; + setting = DRIVE_STRENGTH_BIT_MSK(HI) - setting; set_drive_strength(reg, pin, setting); }