From: Gary Jennejohn Date: Fri, 31 Aug 2007 12:29:04 +0000 (+0200) Subject: Add support for Sil680 IDE controller. X-Git-Tag: v1.3.0-rc1~11 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=041a2554ad619e80dce520c1a33210affcb6a3f2;p=oweals%2Fu-boot.git Add support for Sil680 IDE controller. o add drivers/sil680.c to support the Sil680 IDE-controller. o drivers/Makefile: add sil680.o. Signed-off-by: Gary Jennejohn --- diff --git a/drivers/Makefile b/drivers/Makefile index 3ee6312e9d..6bf05ccad1 100755 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -43,7 +43,7 @@ COBJS = 3c589.o 5701rls.o ali512x.o at45.o ata_piix.o atmel_usart.o \ sed13806.o sed156x.o \ serial.o serial_max3100.o \ serial_pl010.o serial_pl011.o serial_xuartlite.o \ - sl811_usb.o sm501.o smc91111.o smiLynxEM.o \ + sil680.o sl811_usb.o sm501.o smc91111.o smiLynxEM.o \ status_led.o sym53c8xx.o systemace.o ahci.o \ ti_pci1410a.o tigon3.o tsec.o \ tsi108_eth.o tsi108_i2c.o tsi108_pci.o \ diff --git a/drivers/sil680.c b/drivers/sil680.c new file mode 100644 index 0000000000..a6143df4c0 --- /dev/null +++ b/drivers/sil680.c @@ -0,0 +1,110 @@ +/* + * (C) Copyright 2007 + * Gary Jennejohn, DENX Software Engineering, garyj@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ +/* sil680.c - ide support functions for the Sil0680A controller */ + +/* + * The following parameters must be defined in the configuration file + * of the target board: + * + * #define CFG_IDE_SIL680 + * + * #define CONFIG_PCI_PNP + * NOTE it may also be necessary to define this if the default of 8 is + * incorrect for the target board (e.g. the sequoia board requires 0). + * #define CFG_PCI_CACHE_LINE_SIZE 0 + * + * #define CONFIG_CMD_IDE + * #undef CONFIG_IDE_8xx_DIRECT + * #undef CONFIG_IDE_LED + * #undef CONFIG_IDE_RESET + * #define CONFIG_IDE_PREINIT + * #define CFG_IDE_MAXBUS 2 - modify to suit + * #define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*2) - modify to suit + * #define CFG_ATA_BASE_ADDR 0 + * #define CFG_ATA_IDE0_OFFSET 0 + * #define CFG_ATA_IDE1_OFFSET 0 + * #define CFG_ATA_DATA_OFFSET 0 + * #define CFG_ATA_REG_OFFSET 0 + * #define CFG_ATA_ALT_OFFSET 0x0004 + * + * The mapping for PCI IO-space. + * NOTE this is the value for the sequoia board. Modify to suit. + * #define CFG_PCI0_IO_SPACE 0xE8000000 + */ + +#include +#if defined(CFG_IDE_SIL680) +#include +#include +#include + +extern ulong ide_bus_offset[CFG_IDE_MAXBUS]; + +int ide_preinit (void) +{ + int status; + pci_dev_t devbusfn; + int l; + + status = 1; + for (l = 0; l < CFG_IDE_MAXBUS; l++) { + ide_bus_offset[l] = -ATA_STATUS; + } + devbusfn = pci_find_device (0x1095, 0x0680, 0); + if (devbusfn != -1) { + status = 0; + + pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0, + (u32 *) &ide_bus_offset[0]); + ide_bus_offset[0] &= 0xfffffff8; + ide_bus_offset[0] += CFG_PCI0_IO_SPACE; + pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_2, + (u32 *) &ide_bus_offset[1]); + ide_bus_offset[1] &= 0xfffffff8; + ide_bus_offset[1] += CFG_PCI0_IO_SPACE; + /* init various things - taken from the Linux driver */ + /* set PIO mode */ + pci_write_config_byte(devbusfn, 0x80, 0x00); + pci_write_config_byte(devbusfn, 0x84, 0x00); + /* IDE0 */ + pci_write_config_byte(devbusfn, 0xA1, 0x02); + pci_write_config_word(devbusfn, 0xA2, 0x328A); + pci_write_config_dword(devbusfn, 0xA4, 0x62DD62DD); + pci_write_config_dword(devbusfn, 0xA8, 0x43924392); + pci_write_config_dword(devbusfn, 0xAC, 0x40094009); + /* IDE1 */ + pci_write_config_byte(devbusfn, 0xB1, 0x02); + pci_write_config_word(devbusfn, 0xB2, 0x328A); + pci_write_config_dword(devbusfn, 0xB4, 0x62DD62DD); + pci_write_config_dword(devbusfn, 0xB8, 0x43924392); + pci_write_config_dword(devbusfn, 0xBC, 0x40094009); + } + return (status); +} + +void ide_set_reset (int flag) { + return; +} + +#endif /* CFG_IDE_SIL680 */