From: Codrin Ciubotariu Date: Mon, 14 Mar 2016 11:46:52 +0000 (+0200) Subject: drivers: net: vsc9953: Do not configure disabled ports X-Git-Tag: v2016.05-rc1~31^2~8 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=02c00f265da0d85e81fb74f6aabfc4295d49ff56;p=oweals%2Fu-boot.git drivers: net: vsc9953: Do not configure disabled ports Some SerDes protocols might not enable all l2switch ports. In this case, these ports should not be configured to perform Rx/Tx operations. This also fixes an issue when flooded frames were also switched to disabled ports and frames start to accumulate, consuming memory and eventually causing head-of-line blocking for other frames. Signed-off-by: Codrin Ciubotariu Acked-by: Joe Hershberger Reviewed-by: York Sun --- diff --git a/drivers/net/vsc9953.c b/drivers/net/vsc9953.c index 44afe14051..4b3b811967 100644 --- a/drivers/net/vsc9953.c +++ b/drivers/net/vsc9953.c @@ -2525,6 +2525,9 @@ void vsc9953_init(bd_t *bis) if (vsc9953_port_init(i)) printf("Failed to initialize l2switch port %d\n", i); + if (!vsc9953_l2sw.port[i].enabled) + continue; + /* Enable VSC9953 GMII Ports Port ID 0 - 7 */ if (VSC9953_INTERNAL_PORT_CHECK(i)) { out_le32(&l2ana_reg->pfc[i].pfc_cfg, @@ -2537,6 +2540,11 @@ void vsc9953_init(bd_t *bis) out_le32(&l2sys_reg->pause_cfg.mac_fc_cfg[i], VSC9953_MAC_FC_CFG); } + + l2dev_gmii_reg = (struct vsc9953_dev_gmii *) + (VSC9953_OFFSET + VSC9953_DEV_GMII_OFFSET + + T1040_SWITCH_GMII_DEV_OFFSET * i); + out_le32(&l2dev_gmii_reg->port_mode.clock_cfg, VSC9953_CLOCK_CFG); out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_ena_cfg, @@ -2559,10 +2567,6 @@ void vsc9953_init(bd_t *bis) /* WAIT FOR 2 us*/ udelay(2); - l2dev_gmii_reg = (struct vsc9953_dev_gmii *)( - (char *)l2dev_gmii_reg - + T1040_SWITCH_GMII_DEV_OFFSET); - /* Initialize Lynx PHY Wrappers */ phy_addr = 0; if (vsc9953_l2sw.port[i].enet_if ==