From: Eric Andersen Date: Fri, 6 Jul 2001 20:36:57 +0000 (-0000) Subject: Update the debian packaging stuff X-Git-Tag: 0_52~11 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=0279505e8c837c59b6a777d40a58ee1a399d19da;p=oweals%2Fbusybox.git Update the debian packaging stuff --- diff --git a/debian/Config.h-deb b/debian/Config.h-deb index 9b0ab339c..c53cdc057 100644 --- a/debian/Config.h-deb +++ b/debian/Config.h-deb @@ -2,11 +2,12 @@ // This file defines the feature set to be compiled into busybox. // When you turn things off here, they won't be compiled in at all. // -//// This file is parsed by sed. You MUST use single line comments. +//// This file is parsed by sed. You MUST use single line comments. // i.e., //#define BB_BLAH // // // BusyBox Applications +//#define BB_ADJTIMEX #define BB_AR #define BB_BASENAME #define BB_CAT @@ -18,6 +19,7 @@ #define BB_CLEAR //#define BB_CMP #define BB_CP +//#define BB_CPIO #define BB_CUT #define BB_DATE //#define BB_DC @@ -33,8 +35,8 @@ #define BB_DU //#define BB_DUMPKMAP #define BB_ECHO -//#define BB_ENV -//#define BB_EXPR +#define BB_ENV +#define BB_EXPR //#define BB_FBSET //#define BB_FDFLUSH #define BB_FIND @@ -94,10 +96,11 @@ #define BB_RMDIR //#define BB_RMMOD //#define BB_ROUTE +//#define BB_RPM2CPIO //#define BB_RPMUNPACK #define BB_SED //#define BB_SETKEYCODES -#define BB_SH +//#define BB_SH #define BB_SLEEP #define BB_SORT //#define BB_STTY @@ -114,6 +117,7 @@ #define BB_TR #define BB_TRUE_FALSE #define BB_TTY +//#define BB_UNIX2DOS //#define BB_UUENCODE //#define BB_UUDECODE #define BB_UMOUNT @@ -122,7 +126,7 @@ //#define BB_UPDATE #define BB_UPTIME //#define BB_USLEEP -//#define BB_VI +#define BB_VI //#define BB_WATCHDOG #define BB_WC #define BB_WGET @@ -134,17 +138,57 @@ // // // - +// --------------------------------------------------------- // This is where feature definitions go. Generally speaking, // turning this stuff off makes things a bit smaller (and less // pretty/useful). // // +// If you enabled BB_SH above, you may select one of the following shells. +// You can only select ONE of the following shells. Sorry. +// +// lash is the very smallest shell (adds just 10k) and it is quite usable as a +// command prompt, but it is not suitable for any but the most trivial scripting +// (such as an initrd that calls insmod a few times) since it does not +// understand Bourne shell grammer. It does handle pipes, redirects, and job +// control though. Adding in command editing makes it very nice lightweight +// command prompt. +//#define BB_FEATURE_LASH +// +// hush is also quite small (just 18k) and it has very complete Bourne shell +// grammer. It handles if/then/else/fi just fine, but doesn't handle loops +// like for/do/done or case/esac and such. It also currently has a problem +// with job control. +//#define BB_FEATURE_HUSH +// +// msh: The minix shell (adds just 30k) is quite complete and handles things +// like for/do/done, case/esac and all the things you expect a Bourne shell to +// do. It is not always pedantically correct about Bourne shell grammer (try +// running the shell testscript "tests/sh.testcases" on it and compare vs +// bash) but for most things it works quite well. It also uses only vfork, so +// it can be used on uClinux systems. This was only recently added, so there is +// still room to shrink it further... +#define BB_FEATURE_MSH +// +// ash: This adds about 60k in the default configuration and is the most +// complete and most pedantically correct shell included with busybox. This +// shell was also recently added, and several people (mainly Vladimir and Erik) +// have been working on it. There are a number of configurable things at the +// top of ash.c as well, so check those out if you want to tweak things. The +// Posix math support is currently disabled (that bit of code was horrible) but +// will be restored for the next BusyBox release. +//#define BB_FEATURE_ASH +// // BusyBox will, by default, malloc space for its buffers. This costs code // size for the call to xmalloc. You can use the following feature to have // them put on the stack. For some very small machines with limited stack // space, this can be deadly. For most folks, this works just fine... //#define BB_FEATURE_BUFFERS_GO_ON_STACK +// The third alternative for buffer allocation is to use BSS. This works +// beautifully for computers with a real MMU (and OS support), but wastes +// runtime RAM for uCLinux. This behavior was the only one available for +// BusyBox versions 0.48 and earlier. +//#define BB_FEATURE_BUFFERS_GO_IN_BSS // // Turn this on to use Erik's very cool devps, and devmtab kernel drivers, // thereby eliminating the need for the /proc filesystem and thereby saving @@ -184,8 +228,8 @@ // enable ls -L #define BB_FEATURE_LS_FOLLOWLINKS // -// Change ping implementation -- simplified, featureless, but really small. -//#define BB_FEATURE_SIMPLE_PING +// Disable for a smaller (but less functional) ping +#define BB_FEATURE_FANCY_PING // // Make init use a simplified /etc/inittab file (recommended). #define BB_FEATURE_USE_INITTAB @@ -205,9 +249,9 @@ // enable syslogd -C //#define BB_FEATURE_IPC_SYSLOG // -//Simple tail implementation (2.34k vs 3k for the full one). +//Disable for a simple tail implementation (2.34k vs 3k for the full one). //Both provide 'tail -f', but this cuts out -c, -q, -s, and -v. -#define BB_FEATURE_SIMPLE_TAIL +#define BB_FEATURE_FANCY_TAIL // // Enable support for loop devices in mount #define BB_FEATURE_MOUNT_LOOP @@ -224,9 +268,6 @@ // (i.e., in case of an unreachable NFS system). #define BB_FEATURE_MOUNT_FORCE // -// use -i (interactive) flag for rm -//#define BB_FEATURE_RM_INTERACTIVE -// // Enable support for creation of tar files. #define BB_FEATURE_TAR_CREATE // @@ -236,9 +277,12 @@ // Enable support for tar -z option (currently only works for inflating) #define BB_FEATURE_TAR_GZIP // -//// Enable reverse sort +// Enable reverse sort #define BB_FEATURE_SORT_REVERSE // +// Enable uniqe sort +#define BB_FEATURE_SORT_UNIQUE +// // Enable command line editing in the shell. // Only relevant if BB_SH is enabled. On by default. #define BB_FEATURE_COMMAND_EDITING @@ -254,7 +298,7 @@ //were shell builtins. Nice for staticly linking an emergency rescue shell, //among other things. Off by default. // Only relevant if BB_SH is enabled. -#define BB_FEATURE_SH_STANDALONE_SHELL +//#define BB_FEATURE_SH_STANDALONE_SHELL // //When this is enabled, busybox shell applets can be called using full path //names. This causes applets (i.e., most busybox commands) to override @@ -265,12 +309,11 @@ // Only relevant if BB_SH is enabled. Off by default. //#define BB_FEATURE_SH_APPLETS_ALWAYS_WIN // -// Some deeply embedded systems don't have usernames or even hostnames, -// and the default prompt can look rather hideous on them. Uncomment -// this option for a simpler, path-only prompt (which was the default until -// around BusyBox-0.48). On by default. +// Uncomment this option for a fancy shell prompt that includes the +// current username and hostname. On systems that don't have usernames +// or hostnames, this can look hideous. // Only relevant if BB_SH is enabled. -#define BB_FEATURE_SH_SIMPLE_PROMPT +//#define BB_FEATURE_SH_FANCY_PROMPT // //Turn on extra fbset options //#define BB_FEATURE_FBSET_FANCY @@ -287,6 +330,12 @@ // Support module version checking //#define BB_FEATURE_INSMOD_VERSION_CHECKING // +// Support for uClinux memory usage optimization, which will load the image +// directly into the kernel memory. This divides memory requrements by three. +// If you are not running uClinux (i.e., your CPU has an MMU) leave this +// disabled... +//#define BB_FEATURE_INSMOD_LOADINKMEM +// // Support for Minix filesystem, version 2 //#define BB_FEATURE_MINIX2 // @@ -300,7 +349,7 @@ //#define BB_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ // // Enable ifconfig option "hw". Currently works for only with "ether". -//#define BB_FEATURE_IFCONFIG_HW +#define BB_FEATURE_IFCONFIG_HW // // Enable busybox --install [-s] // to create links (or symlinks) for all the commands that are @@ -340,6 +389,23 @@ #define BB_FEATURE_TFTP_PUT #define BB_FEATURE_TFTP_GET // +// features for vi +#define BB_FEATURE_VI_COLON // ":" colon commands, no "ex" mode +#define BB_FEATURE_VI_YANKMARK // Yank/Put commands and Mark cmds +#define BB_FEATURE_VI_SEARCH // search and replace cmds +#define BB_FEATURE_VI_USE_SIGNALS // catch signals +#define BB_FEATURE_VI_DOT_CMD // remember previous cmd and "." cmd +#define BB_FEATURE_VI_READONLY // vi -R and "view" mode +#define BB_FEATURE_VI_SETOPTS // set-able options, ai ic showmatch +#define BB_FEATURE_VI_SET // :set +#define BB_FEATURE_VI_WIN_RESIZE // handle window resize +// +// Enable a if you system have setuped locale +//#define BB_LOCALE_SUPPORT +// +// Support for TELNET to pass TERM type to remote host. Adds 384 bytes. +#define BB_FEATURE_TELNET_TTYPE +// // End of Features List // // @@ -354,20 +420,36 @@ #if defined BB_SH #if defined BB_FEATURE_COMMAND_EDITING #define BB_CMDEDIT - #ifndef BB_FEATURE_USE_TERMIOS - #define BB_FEATURE_USE_TERMIOS - #endif #else #undef BB_FEATURE_COMMAND_EDITING #undef BB_FEATURE_COMMAND_TAB_COMPLETION #undef BB_FEATURE_COMMAND_USERNAME_COMPLETION - #define BB_FEATURE_SH_SIMPLE_PROMPT + #undef BB_FEATURE_SH_FANCY_PROMPT + #endif + #if ! defined BB_FEATURE_LASH && ! defined BB_FEATURE_HUSH && ! defined BB_FEATURE_MSH && ! defined BB_FEATURE_ASH + #define BB_FEATURE_MSH + #endif + #if defined BB_FEATURE_ASH && (defined BB_FEATURE_LASH || defined BB_FEATURE_HUSH || defined BB_FEATURE_MSH) + #undef BB_FEATURE_LASH + #undef BB_FEATURE_HUSH + #undef BB_FEATURE_MSH + #elif defined BB_FEATURE_MSH && (defined BB_FEATURE_LASH || defined BB_FEATURE_HUSH || defined BB_FEATURE_MSH) + #undef BB_FEATURE_LASH + #undef BB_FEATURE_HUSH + #undef BB_FEATURE_ASH + #elif defined BB_FEATURE_HUSH && (defined BB_FEATURE_LASH || defined BB_FEATURE_HUSH || defined BB_FEATURE_MSH) + #undef BB_FEATURE_LASH + #undef BB_FEATURE_MSH + #undef BB_FEATURE_ASH + #elif defined BB_FEATURE_LASH && (defined BB_FEATURE_LASH || defined BB_FEATURE_HUSH || defined BB_FEATURE_MSH) + #undef BB_FEATURE_HUSH + #undef BB_FEATURE_MSH + #undef BB_FEATURE_ASH #endif #else - #undef BB_FEATURE_COMMAND_EDITING #undef BB_FEATURE_SH_APPLETS_ALWAYS_WIN #undef BB_FEATURE_SH_STANDALONE_SHELL - #undef BB_FEATURE_SH_SIMPLE_PROMPT + #undef BB_FEATURE_SH_FANCY_PROMPT #endif // #ifdef BB_KILLALL @@ -380,38 +462,6 @@ #undef BB_FEATURE_LINUXRC #endif // -#ifdef BB_GZIP - #ifndef BB_GUNZIP - #define BB_GUNZIP - #endif -#endif -// -#ifdef BB_DPKG - #ifndef BB_DPKG_DEB - #define BB_DPKG_DEB - #endif -#endif -// -#ifdef BB_DPKG_DEB - #ifndef BB_AR - #define BB_AR - #endif - #ifndef BB_TAR - #define BB_TAR - #endif - #ifndef BB_FEATURE_TAR_GZIP - #define BB_FEATURE_TAR_GZIP - #endif -#endif -// -#ifdef BB_TAR - #ifdef BB_FEATURE_TAR_GZIP - #ifndef BB_GUNZIP - #define BB_GUNZIP - #endif - #endif -#endif -// #if defined BB_MOUNT && defined BB_FEATURE_NFSMOUNT #define BB_NFSMOUNT #endif @@ -433,7 +483,3 @@ #define BB_LOGREAD #endif #endif -// -#if defined BB_DOS2UNIX - #define BB_UNIX2DOS -#endif diff --git a/debian/Config.h-static b/debian/Config.h-static index 70a5251c5..41309f314 100644 --- a/debian/Config.h-static +++ b/debian/Config.h-static @@ -2,11 +2,12 @@ // This file defines the feature set to be compiled into busybox. // When you turn things off here, they won't be compiled in at all. // -//// This file is parsed by sed. You MUST use single line comments. +//// This file is parsed by sed. You MUST use single line comments. // i.e., //#define BB_BLAH // // // BusyBox Applications +//#define BB_ADJTIMEX #define BB_AR #define BB_BASENAME #define BB_CAT @@ -18,6 +19,7 @@ #define BB_CLEAR #define BB_CMP #define BB_CP +#define BB_CPIO #define BB_CUT #define BB_DATE #define BB_DC @@ -73,11 +75,11 @@ #define BB_MKNOD #define BB_MKSWAP #define BB_MKTEMP -#define BB_MV #define BB_NC #define BB_MORE #define BB_MOUNT #define BB_MT +#define BB_MV #define BB_NSLOOKUP #define BB_PING #define BB_PIVOT_ROOT @@ -94,6 +96,7 @@ #define BB_RMDIR #define BB_RMMOD #define BB_ROUTE +#define BB_RPM2CPIO #define BB_RPMUNPACK #define BB_SED #define BB_SETKEYCODES @@ -114,6 +117,7 @@ #define BB_TR #define BB_TRUE_FALSE #define BB_TTY +#define BB_UNIX2DOS #define BB_UUENCODE #define BB_UUDECODE #define BB_UMOUNT @@ -134,17 +138,57 @@ // // // - +// --------------------------------------------------------- // This is where feature definitions go. Generally speaking, // turning this stuff off makes things a bit smaller (and less // pretty/useful). // // +// If you enabled BB_SH above, you may select one of the following shells. +// You can only select ONE of the following shells. Sorry. +// +// lash is the very smallest shell (adds just 10k) and it is quite usable as a +// command prompt, but it is not suitable for any but the most trivial scripting +// (such as an initrd that calls insmod a few times) since it does not +// understand Bourne shell grammer. It does handle pipes, redirects, and job +// control though. Adding in command editing makes it very nice lightweight +// command prompt. +//#define BB_FEATURE_LASH +// +// hush is also quite small (just 18k) and it has very complete Bourne shell +// grammer. It handles if/then/else/fi just fine, but doesn't handle loops +// like for/do/done or case/esac and such. It also currently has a problem +// with job control. +//#define BB_FEATURE_HUSH +// +// msh: The minix shell (adds just 30k) is quite complete and handles things +// like for/do/done, case/esac and all the things you expect a Bourne shell to +// do. It is not always pedantically correct about Bourne shell grammer (try +// running the shell testscript "tests/sh.testcases" on it and compare vs +// bash) but for most things it works quite well. It also uses only vfork, so +// it can be used on uClinux systems. This was only recently added, so there is +// still room to shrink it further... +//#define BB_FEATURE_MSH +// +// ash: This adds about 60k in the default configuration and is the most +// complete and most pedantically correct shell included with busybox. This +// shell was also recently added, and several people (mainly Vladimir and Erik) +// have been working on it. There are a number of configurable things at the +// top of ash.c as well, so check those out if you want to tweak things. The +// Posix math support is currently disabled (that bit of code was horrible) but +// will be restored for the next BusyBox release. +#define BB_FEATURE_ASH +// // BusyBox will, by default, malloc space for its buffers. This costs code // size for the call to xmalloc. You can use the following feature to have // them put on the stack. For some very small machines with limited stack // space, this can be deadly. For most folks, this works just fine... //#define BB_FEATURE_BUFFERS_GO_ON_STACK +// The third alternative for buffer allocation is to use BSS. This works +// beautifully for computers with a real MMU (and OS support), but wastes +// runtime RAM for uCLinux. This behavior was the only one available for +// BusyBox versions 0.48 and earlier. +//#define BB_FEATURE_BUFFERS_GO_IN_BSS // // Turn this on to use Erik's very cool devps, and devmtab kernel drivers, // thereby eliminating the need for the /proc filesystem and thereby saving @@ -184,8 +228,8 @@ // enable ls -L #define BB_FEATURE_LS_FOLLOWLINKS // -// Change ping implementation -- simplified, featureless, but really small. -//#define BB_FEATURE_SIMPLE_PING +// Disable for a smaller (but less functional) ping +#define BB_FEATURE_FANCY_PING // // Make init use a simplified /etc/inittab file (recommended). #define BB_FEATURE_USE_INITTAB @@ -205,9 +249,9 @@ // enable syslogd -C //#define BB_FEATURE_IPC_SYSLOG // -//Simple tail implementation (2.34k vs 3k for the full one). +//Disable for a simple tail implementation (2.34k vs 3k for the full one). //Both provide 'tail -f', but this cuts out -c, -q, -s, and -v. -#define BB_FEATURE_SIMPLE_TAIL +#define BB_FEATURE_FANCY_TAIL // // Enable support for loop devices in mount #define BB_FEATURE_MOUNT_LOOP @@ -224,9 +268,6 @@ // (i.e., in case of an unreachable NFS system). #define BB_FEATURE_MOUNT_FORCE // -// use -i (interactive) flag for rm -//#define BB_FEATURE_RM_INTERACTIVE -// // Enable support for creation of tar files. #define BB_FEATURE_TAR_CREATE // @@ -236,9 +277,12 @@ // Enable support for tar -z option (currently only works for inflating) #define BB_FEATURE_TAR_GZIP // -//// Enable reverse sort +// Enable reverse sort #define BB_FEATURE_SORT_REVERSE // +// Enable uniqe sort +#define BB_FEATURE_SORT_UNIQUE +// // Enable command line editing in the shell. // Only relevant if BB_SH is enabled. On by default. #define BB_FEATURE_COMMAND_EDITING @@ -265,12 +309,11 @@ // Only relevant if BB_SH is enabled. Off by default. //#define BB_FEATURE_SH_APPLETS_ALWAYS_WIN // -// Some deeply embedded systems don't have usernames or even hostnames, -// and the default prompt can look rather hideous on them. Uncomment -// this option for a simpler, path-only prompt (which was the default until -// around BusyBox-0.48). On by default. +// Uncomment this option for a fancy shell prompt that includes the +// current username and hostname. On systems that don't have usernames +// or hostnames, this can look hideous. // Only relevant if BB_SH is enabled. -#define BB_FEATURE_SH_SIMPLE_PROMPT +#define BB_FEATURE_SH_FANCY_PROMPT // //Turn on extra fbset options //#define BB_FEATURE_FBSET_FANCY @@ -287,6 +330,12 @@ // Support module version checking //#define BB_FEATURE_INSMOD_VERSION_CHECKING // +// Support for uClinux memory usage optimization, which will load the image +// directly into the kernel memory. This divides memory requrements by three. +// If you are not running uClinux (i.e., your CPU has an MMU) leave this +// disabled... +//#define BB_FEATURE_INSMOD_LOADINKMEM +// // Support for Minix filesystem, version 2 //#define BB_FEATURE_MINIX2 // @@ -294,10 +343,10 @@ #define BB_FEATURE_IFCONFIG_STATUS // // Enable ifconfig slip-specific options "keepalive" and "outfill" -#define BB_FEATURE_IFCONFIG_SLIP +//#define BB_FEATURE_IFCONFIG_SLIP // // Enable ifconfig options "mem_start", "io_addr", and "irq". -#define BB_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ +//#define BB_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ // // Enable ifconfig option "hw". Currently works for only with "ether". #define BB_FEATURE_IFCONFIG_HW @@ -305,7 +354,7 @@ // Enable busybox --install [-s] // to create links (or symlinks) for all the commands that are // compiled into the binary. (needs /proc filesystem) -//#define BB_FEATURE_INSTALLER +#define BB_FEATURE_INSTALLER // // Enable a nifty progress meter in wget (adds just under 2k) #define BB_FEATURE_WGET_STATUSBAR @@ -340,6 +389,23 @@ #define BB_FEATURE_TFTP_PUT #define BB_FEATURE_TFTP_GET // +// features for vi +#define BB_FEATURE_VI_COLON // ":" colon commands, no "ex" mode +#define BB_FEATURE_VI_YANKMARK // Yank/Put commands and Mark cmds +#define BB_FEATURE_VI_SEARCH // search and replace cmds +#define BB_FEATURE_VI_USE_SIGNALS // catch signals +#define BB_FEATURE_VI_DOT_CMD // remember previous cmd and "." cmd +#define BB_FEATURE_VI_READONLY // vi -R and "view" mode +#define BB_FEATURE_VI_SETOPTS // set-able options, ai ic showmatch +#define BB_FEATURE_VI_SET // :set +#define BB_FEATURE_VI_WIN_RESIZE // handle window resize +// +// Enable a if you system have setuped locale +//#define BB_LOCALE_SUPPORT +// +// Support for TELNET to pass TERM type to remote host. Adds 384 bytes. +#define BB_FEATURE_TELNET_TTYPE +// // End of Features List // // @@ -354,20 +420,36 @@ #if defined BB_SH #if defined BB_FEATURE_COMMAND_EDITING #define BB_CMDEDIT - #ifndef BB_FEATURE_USE_TERMIOS - #define BB_FEATURE_USE_TERMIOS - #endif #else #undef BB_FEATURE_COMMAND_EDITING #undef BB_FEATURE_COMMAND_TAB_COMPLETION #undef BB_FEATURE_COMMAND_USERNAME_COMPLETION - #define BB_FEATURE_SH_SIMPLE_PROMPT + #undef BB_FEATURE_SH_FANCY_PROMPT + #endif + #if ! defined BB_FEATURE_LASH && ! defined BB_FEATURE_HUSH && ! defined BB_FEATURE_MSH && ! defined BB_FEATURE_ASH + #define BB_FEATURE_MSH + #endif + #if defined BB_FEATURE_ASH && (defined BB_FEATURE_LASH || defined BB_FEATURE_HUSH || defined BB_FEATURE_MSH) + #undef BB_FEATURE_LASH + #undef BB_FEATURE_HUSH + #undef BB_FEATURE_MSH + #elif defined BB_FEATURE_MSH && (defined BB_FEATURE_LASH || defined BB_FEATURE_HUSH || defined BB_FEATURE_MSH) + #undef BB_FEATURE_LASH + #undef BB_FEATURE_HUSH + #undef BB_FEATURE_ASH + #elif defined BB_FEATURE_HUSH && (defined BB_FEATURE_LASH || defined BB_FEATURE_HUSH || defined BB_FEATURE_MSH) + #undef BB_FEATURE_LASH + #undef BB_FEATURE_MSH + #undef BB_FEATURE_ASH + #elif defined BB_FEATURE_LASH && (defined BB_FEATURE_LASH || defined BB_FEATURE_HUSH || defined BB_FEATURE_MSH) + #undef BB_FEATURE_HUSH + #undef BB_FEATURE_MSH + #undef BB_FEATURE_ASH #endif #else - #undef BB_FEATURE_COMMAND_EDITING #undef BB_FEATURE_SH_APPLETS_ALWAYS_WIN #undef BB_FEATURE_SH_STANDALONE_SHELL - #undef BB_FEATURE_SH_SIMPLE_PROMPT + #undef BB_FEATURE_SH_FANCY_PROMPT #endif // #ifdef BB_KILLALL @@ -380,38 +462,6 @@ #undef BB_FEATURE_LINUXRC #endif // -#ifdef BB_GZIP - #ifndef BB_GUNZIP - #define BB_GUNZIP - #endif -#endif -// -#ifdef BB_DPKG - #ifndef BB_DPKG_DEB - #define BB_DPKG_DEB - #endif -#endif -// -#ifdef BB_DPKG_DEB - #ifndef BB_AR - #define BB_AR - #endif - #ifndef BB_TAR - #define BB_TAR - #endif - #ifndef BB_FEATURE_TAR_GZIP - #define BB_FEATURE_TAR_GZIP - #endif -#endif -// -#ifdef BB_TAR - #ifdef BB_FEATURE_TAR_GZIP - #ifndef BB_GUNZIP - #define BB_GUNZIP - #endif - #endif -#endif -// #if defined BB_MOUNT && defined BB_FEATURE_NFSMOUNT #define BB_NFSMOUNT #endif @@ -433,7 +483,3 @@ #define BB_LOGREAD #endif #endif -// -#if defined BB_DOS2UNIX - #define BB_UNIX2DOS -#endif diff --git a/debian/Config.h-udeb b/debian/Config.h-udeb index b76abc088..2f46ff764 100644 --- a/debian/Config.h-udeb +++ b/debian/Config.h-udeb @@ -2,11 +2,12 @@ // This file defines the feature set to be compiled into busybox. // When you turn things off here, they won't be compiled in at all. // -//// This file is parsed by sed. You MUST use single line comments. +//// This file is parsed by sed. You MUST use single line comments. // i.e., //#define BB_BLAH // // // BusyBox Applications +//#define BB_ADJTIMEX //#define BB_AR #define BB_BASENAME #define BB_CAT @@ -18,6 +19,7 @@ #define BB_CLEAR //#define BB_CMP #define BB_CP +//#define BB_CPIO #define BB_CUT #define BB_DATE //#define BB_DC @@ -33,8 +35,8 @@ #define BB_DU //#define BB_DUMPKMAP #define BB_ECHO -//#define BB_ENV -//#define BB_EXPR +#define BB_ENV +#define BB_EXPR //#define BB_FBSET //#define BB_FDFLUSH #define BB_FIND @@ -60,13 +62,13 @@ #define BB_LN //#define BB_LOADACM //#define BB_LOADFONT -//#define BB_LOADKMAP +#define BB_LOADKMAP #define BB_LOGGER //#define BB_LOGNAME #define BB_LS #define BB_LSMOD //#define BB_MAKEDEVS -//#define BB_MD5SUM +#define BB_MD5SUM #define BB_MKDIR //#define BB_MKFIFO //#define BB_MKFS_MINIX @@ -79,7 +81,7 @@ //#define BB_MT #define BB_MV //#define BB_NSLOOKUP -//#define BB_PING +#define BB_PING #define BB_PIVOT_ROOT #define BB_POWEROFF //#define BB_PRINTF @@ -94,6 +96,7 @@ #define BB_RMDIR //#define BB_RMMOD //#define BB_ROUTE +//#define BB_RPM2CPIO //#define BB_RPMUNPACK #define BB_SED //#define BB_SETKEYCODES @@ -108,12 +111,13 @@ #define BB_TAR //#define BB_TEE //#define BB_TEST -//#define BB_TELNET +#define BB_TELNET //#define BB_TFTP #define BB_TOUCH -//#define BB_TR +#define BB_TR #define BB_TRUE_FALSE #define BB_TTY +//#define BB_UNIX2DOS //#define BB_UUENCODE //#define BB_UUDECODE #define BB_UMOUNT @@ -122,10 +126,10 @@ //#define BB_UPDATE #define BB_UPTIME //#define BB_USLEEP -//#define BB_VI +#define BB_VI //#define BB_WATCHDOG #define BB_WC -//#define BB_WGET +#define BB_WGET #define BB_WHICH #define BB_WHOAMI #define BB_XARGS @@ -134,17 +138,57 @@ // // // - +// --------------------------------------------------------- // This is where feature definitions go. Generally speaking, // turning this stuff off makes things a bit smaller (and less // pretty/useful). // // +// If you enabled BB_SH above, you may select one of the following shells. +// You can only select ONE of the following shells. Sorry. +// +// lash is the very smallest shell (adds just 10k) and it is quite usable as a +// command prompt, but it is not suitable for any but the most trivial scripting +// (such as an initrd that calls insmod a few times) since it does not +// understand Bourne shell grammer. It does handle pipes, redirects, and job +// control though. Adding in command editing makes it very nice lightweight +// command prompt. +//#define BB_FEATURE_LASH +// +// hush is also quite small (just 18k) and it has very complete Bourne shell +// grammer. It handles if/then/else/fi just fine, but doesn't handle loops +// like for/do/done or case/esac and such. It also currently has a problem +// with job control. +//#define BB_FEATURE_HUSH +// +// msh: The minix shell (adds just 30k) is quite complete and handles things +// like for/do/done, case/esac and all the things you expect a Bourne shell to +// do. It is not always pedantically correct about Bourne shell grammer (try +// running the shell testscript "tests/sh.testcases" on it and compare vs +// bash) but for most things it works quite well. It also uses only vfork, so +// it can be used on uClinux systems. This was only recently added, so there is +// still room to shrink it further... +#define BB_FEATURE_MSH +// +// ash: This adds about 60k in the default configuration and is the most +// complete and most pedantically correct shell included with busybox. This +// shell was also recently added, and several people (mainly Vladimir and Erik) +// have been working on it. There are a number of configurable things at the +// top of ash.c as well, so check those out if you want to tweak things. The +// Posix math support is currently disabled (that bit of code was horrible) but +// will be restored for the next BusyBox release. +//#define BB_FEATURE_ASH +// // BusyBox will, by default, malloc space for its buffers. This costs code // size for the call to xmalloc. You can use the following feature to have // them put on the stack. For some very small machines with limited stack // space, this can be deadly. For most folks, this works just fine... //#define BB_FEATURE_BUFFERS_GO_ON_STACK +// The third alternative for buffer allocation is to use BSS. This works +// beautifully for computers with a real MMU (and OS support), but wastes +// runtime RAM for uCLinux. This behavior was the only one available for +// BusyBox versions 0.48 and earlier. +//#define BB_FEATURE_BUFFERS_GO_IN_BSS // // Turn this on to use Erik's very cool devps, and devmtab kernel drivers, // thereby eliminating the need for the /proc filesystem and thereby saving @@ -184,8 +228,8 @@ // enable ls -L #define BB_FEATURE_LS_FOLLOWLINKS // -// Change ping implementation -- simplified, featureless, but really small. -//#define BB_FEATURE_SIMPLE_PING +// Disable for a smaller (but less functional) ping +#define BB_FEATURE_FANCY_PING // // Make init use a simplified /etc/inittab file (recommended). #define BB_FEATURE_USE_INITTAB @@ -205,9 +249,9 @@ // enable syslogd -C //#define BB_FEATURE_IPC_SYSLOG // -//Simple tail implementation (2.34k vs 3k for the full one). +//Disable for a simple tail implementation (2.34k vs 3k for the full one). //Both provide 'tail -f', but this cuts out -c, -q, -s, and -v. -#define BB_FEATURE_SIMPLE_TAIL +#define BB_FEATURE_FANCY_TAIL // // Enable support for loop devices in mount #define BB_FEATURE_MOUNT_LOOP @@ -224,9 +268,6 @@ // (i.e., in case of an unreachable NFS system). #define BB_FEATURE_MOUNT_FORCE // -// use -i (interactive) flag for rm -//#define BB_FEATURE_RM_INTERACTIVE -// // Enable support for creation of tar files. #define BB_FEATURE_TAR_CREATE // @@ -236,9 +277,12 @@ // Enable support for tar -z option (currently only works for inflating) #define BB_FEATURE_TAR_GZIP // -//// Enable reverse sort +// Enable reverse sort #define BB_FEATURE_SORT_REVERSE // +// Enable uniqe sort +#define BB_FEATURE_SORT_UNIQUE +// // Enable command line editing in the shell. // Only relevant if BB_SH is enabled. On by default. #define BB_FEATURE_COMMAND_EDITING @@ -254,7 +298,7 @@ //were shell builtins. Nice for staticly linking an emergency rescue shell, //among other things. Off by default. // Only relevant if BB_SH is enabled. -#define BB_FEATURE_SH_STANDALONE_SHELL +//#define BB_FEATURE_SH_STANDALONE_SHELL // //When this is enabled, busybox shell applets can be called using full path //names. This causes applets (i.e., most busybox commands) to override @@ -265,12 +309,11 @@ // Only relevant if BB_SH is enabled. Off by default. //#define BB_FEATURE_SH_APPLETS_ALWAYS_WIN // -// Some deeply embedded systems don't have usernames or even hostnames, -// and the default prompt can look rather hideous on them. Uncomment -// this option for a simpler, path-only prompt (which was the default until -// around BusyBox-0.48). On by default. +// Uncomment this option for a fancy shell prompt that includes the +// current username and hostname. On systems that don't have usernames +// or hostnames, this can look hideous. // Only relevant if BB_SH is enabled. -#define BB_FEATURE_SH_SIMPLE_PROMPT +//#define BB_FEATURE_SH_FANCY_PROMPT // //Turn on extra fbset options //#define BB_FEATURE_FBSET_FANCY @@ -287,6 +330,12 @@ // Support module version checking //#define BB_FEATURE_INSMOD_VERSION_CHECKING // +// Support for uClinux memory usage optimization, which will load the image +// directly into the kernel memory. This divides memory requrements by three. +// If you are not running uClinux (i.e., your CPU has an MMU) leave this +// disabled... +//#define BB_FEATURE_INSMOD_LOADINKMEM +// // Support for Minix filesystem, version 2 //#define BB_FEATURE_MINIX2 // @@ -300,12 +349,12 @@ //#define BB_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ // // Enable ifconfig option "hw". Currently works for only with "ether". -//#define BB_FEATURE_IFCONFIG_HW +#define BB_FEATURE_IFCONFIG_HW // // Enable busybox --install [-s] // to create links (or symlinks) for all the commands that are // compiled into the binary. (needs /proc filesystem) -//#define BB_FEATURE_INSTALLER +#define BB_FEATURE_INSTALLER // // Enable a nifty progress meter in wget (adds just under 2k) #define BB_FEATURE_WGET_STATUSBAR @@ -340,6 +389,23 @@ #define BB_FEATURE_TFTP_PUT #define BB_FEATURE_TFTP_GET // +// features for vi +#define BB_FEATURE_VI_COLON // ":" colon commands, no "ex" mode +#define BB_FEATURE_VI_YANKMARK // Yank/Put commands and Mark cmds +#define BB_FEATURE_VI_SEARCH // search and replace cmds +#define BB_FEATURE_VI_USE_SIGNALS // catch signals +#define BB_FEATURE_VI_DOT_CMD // remember previous cmd and "." cmd +#define BB_FEATURE_VI_READONLY // vi -R and "view" mode +#define BB_FEATURE_VI_SETOPTS // set-able options, ai ic showmatch +#define BB_FEATURE_VI_SET // :set +#define BB_FEATURE_VI_WIN_RESIZE // handle window resize +// +// Enable a if you system have setuped locale +//#define BB_LOCALE_SUPPORT +// +// Support for TELNET to pass TERM type to remote host. Adds 384 bytes. +#define BB_FEATURE_TELNET_TTYPE +// // End of Features List // // @@ -354,20 +420,36 @@ #if defined BB_SH #if defined BB_FEATURE_COMMAND_EDITING #define BB_CMDEDIT - #ifndef BB_FEATURE_USE_TERMIOS - #define BB_FEATURE_USE_TERMIOS - #endif #else #undef BB_FEATURE_COMMAND_EDITING #undef BB_FEATURE_COMMAND_TAB_COMPLETION #undef BB_FEATURE_COMMAND_USERNAME_COMPLETION - #define BB_FEATURE_SH_SIMPLE_PROMPT + #undef BB_FEATURE_SH_FANCY_PROMPT + #endif + #if ! defined BB_FEATURE_LASH && ! defined BB_FEATURE_HUSH && ! defined BB_FEATURE_MSH && ! defined BB_FEATURE_ASH + #define BB_FEATURE_MSH + #endif + #if defined BB_FEATURE_ASH && (defined BB_FEATURE_LASH || defined BB_FEATURE_HUSH || defined BB_FEATURE_MSH) + #undef BB_FEATURE_LASH + #undef BB_FEATURE_HUSH + #undef BB_FEATURE_MSH + #elif defined BB_FEATURE_MSH && (defined BB_FEATURE_LASH || defined BB_FEATURE_HUSH || defined BB_FEATURE_MSH) + #undef BB_FEATURE_LASH + #undef BB_FEATURE_HUSH + #undef BB_FEATURE_ASH + #elif defined BB_FEATURE_HUSH && (defined BB_FEATURE_LASH || defined BB_FEATURE_HUSH || defined BB_FEATURE_MSH) + #undef BB_FEATURE_LASH + #undef BB_FEATURE_MSH + #undef BB_FEATURE_ASH + #elif defined BB_FEATURE_LASH && (defined BB_FEATURE_LASH || defined BB_FEATURE_HUSH || defined BB_FEATURE_MSH) + #undef BB_FEATURE_HUSH + #undef BB_FEATURE_MSH + #undef BB_FEATURE_ASH #endif #else - #undef BB_FEATURE_COMMAND_EDITING #undef BB_FEATURE_SH_APPLETS_ALWAYS_WIN #undef BB_FEATURE_SH_STANDALONE_SHELL - #undef BB_FEATURE_SH_SIMPLE_PROMPT + #undef BB_FEATURE_SH_FANCY_PROMPT #endif // #ifdef BB_KILLALL @@ -380,38 +462,6 @@ #undef BB_FEATURE_LINUXRC #endif // -#ifdef BB_GZIP - #ifndef BB_GUNZIP - #define BB_GUNZIP - #endif -#endif -// -#ifdef BB_DPKG - #ifndef BB_DPKG_DEB - #define BB_DPKG_DEB - #endif -#endif -// -#ifdef BB_DPKG_DEB - #ifndef BB_AR - #define BB_AR - #endif - #ifndef BB_TAR - #define BB_TAR - #endif - #ifndef BB_FEATURE_TAR_GZIP - #define BB_FEATURE_TAR_GZIP - #endif -#endif -// -#ifdef BB_TAR - #ifdef BB_FEATURE_TAR_GZIP - #ifndef BB_GUNZIP - #define BB_GUNZIP - #endif - #endif -#endif -// #if defined BB_MOUNT && defined BB_FEATURE_NFSMOUNT #define BB_NFSMOUNT #endif @@ -433,7 +483,3 @@ #define BB_LOGREAD #endif #endif -// -#if defined BB_DOS2UNIX - #define BB_UNIX2DOS -#endif diff --git a/debian/changelog b/debian/changelog index e0d0558ef..c29520210 100644 --- a/debian/changelog +++ b/debian/changelog @@ -1,8 +1,82 @@ -busybox (0.52-1) unstable; urgency=low +busybox (1:0.52-1) unstable; urgency=high - * Not yet released + * New version released. See changelog for details. + + -- Erik Andersen Fri, 6 Jul 2001 14:28:05 -0600 + +busybox (1:0.51-10) unstable; urgency=high + + * Fix a compile problem with gcc 3.0 on hppa (closes: #102045) + + -- Erik Andersen Sat, 23 Jun 2001 23:55:57 -0600 + +busybox (1:0.51-9) unstable; urgency=high + + * tar was creating leading directories with 0777 permissions as + as reult of faulty umask handling. This fixes it, repairing + a grave security problem in the woody the boot floppies. + (closes: #101169) + + -- Erik Andersen Wed, 20 Jun 2001 16:17:38 -0600 + +busybox (1:0.51-8) unstable; urgency=high + + * Fix cp from /proc, where size=0 (closes: #100369) + * Add some padding to struct sysinfo for m68k. + * Apparently some bugs failed to be closed when master choked + (closes: #99627, #99637, #98571) + * Disable the busybox shell for the .deb, since it is not needed + for the boot floppies. + + -- Erik Andersen Mon, 11 Jun 2001 13:26:07 -0600 + +busybox (1:0.51-7) unstable; urgency=high + + * Fix tar permission setting for existing directories (closes: #99627) + * Do not remove the .cvsignore files on 'make release' (closes: #99637) + + -- Erik Andersen Mon, 4 Jun 2001 10:55:19 -0600 + +busybox (1:0.51-6) testing unstable; urgency=high + + * Update the version in testing so DHCP in the woody boot-floppies will work. + * Enable expr for the boot-floppies (closes: #98433) + * It builds on arm just fine now (closes: #97510) + + -- Erik Andersen Wed, 23 May 2001 14:50:13 -0600 + +busybox (1:0.51-5) unstable; urgency=low + + * Backport a sed fix from 0.52pre + * Backport chroot fix from 0.52pre + + -- Erik Andersen Wed, 16 May 2001 23:50:33 -0600 + +busybox (1:0.51-4) unstable; urgency=low + + * Backport from 0.52pre an endianness bugfix for md5sum + * Backport some updates to grep and sed + * Fix 'wget -O -' so it sets the quiet flag + + -- Erik Andersen Mon, 14 May 2001 14:17:36 -0600 + +busybox (1:0.51-3) unstable; urgency=low + + * This is the "I am an idiot" release. + * Make cp and mv work again (closes: #97290) + * Fix the version number. + + -- Erik Andersen Sat, 12 May 2001 17:35:58 -0600 + +busybox (0.51-2) unstable; urgency=low + + * Backport several release critical fixes into the 0.51 codebase + so the boot-floppies will work again. + * Fix a link ordering problem. (closes: #93362) + * Fixed gunzip (closes: #94331) + * Fixed cp permission setting (closes: #94580) - -- Erik Andersen Tue, 9 May 2001 11:30:54 -0600 + -- Erik Andersen Sat, 12 May 2001 11:22:35 -0600 busybox (0.51-1) unstable; urgency=low diff --git a/debian/control b/debian/control index 09990bf2a..038a22117 100644 --- a/debian/control +++ b/debian/control @@ -50,6 +50,7 @@ Package: busybox-udeb Architecture: any Depends: ${shlibs:Depends} Section: debian-installer +Priority: standard Description: Tiny utilities for the debian-installer BusyBox combines tiny versions of many common UNIX utilities into a single small executable. It provides minimalist replacements for the most common diff --git a/debian/rules b/debian/rules index 5271b97fd..1d7413c35 100755 --- a/debian/rules +++ b/debian/rules @@ -84,10 +84,9 @@ do_static: half_clean build-static install-static # Now for the .udeb stuff PACKAGE=busybox-udeb -VERSION=$(shell dpkg-parsechangelog | grep ^Version: | cut -d ' ' -f 2) +VERSION=$(shell dpkg-parsechangelog | grep ^Version: | cut -d ' ' -f 2 | sed -e s/[0-9]://g) ARCH=$(shell dpkg --print-architecture) FILENAME=$(PACKAGE)_$(VERSION)_$(ARCH).udeb -PRIORITY=$(shell grep ^Priority: debian/control | cut -d ' ' -f 2) build-udeb: debian/build-stamp-busybox-udeb debian/build-stamp-busybox-udeb: @@ -186,7 +185,7 @@ busybox-udeb: do_udeb # Don't write your stupid guesses to debian/files. dh_gencontrol -p$@ -- -fdebian/files~ # Register file manually. - dpkg-distaddfile $(FILENAME) debian-installer $(PRIORITY) + dpkg-distaddfile $(FILENAME) debian-installer standard dh_md5sums -p$@ dh_builddeb -p$@ --filename=$(FILENAME)