From: Adrian Schmutzler Date: Tue, 26 May 2020 19:44:54 +0000 (+0200) Subject: ramips: create shared DTSI for DIR-810L and TEW-810DR X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=0225018d8b6ebdd2c8ff27abeb5b0ec929cd815c;p=oweals%2Fopenwrt.git ramips: create shared DTSI for DIR-810L and TEW-810DR These devices seem to have the same board, so let's have a common file. Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/ramips/dts/mt7620a_cameo_810.dtsi b/target/linux/ramips/dts/mt7620a_cameo_810.dtsi new file mode 100644 index 0000000000..8ab166d283 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_cameo_810.dtsi @@ -0,0 +1,116 @@ +//SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7620a.dtsi" + +#include +#include + +/ { + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + factory5g: partition@50000 { + label = "factory5g"; + reg = <0x50000 0x10000>; + read-only; + }; + + partition@60000 { + label = "Wolf_Config"; + reg = <0x60000 0x10000>; + read-only; + }; + + partition@70000 { + label = "MyDlink"; + reg = <0x70000 0x80000>; + read-only; + }; + + partition@f0000 { + label = "Jffs2"; + reg = <0xf0000 0x80000>; + read-only; + }; + + partition@170000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x170000 0x690000>; + }; + }; + }; +}; + +ðernet { + mtd-mac-address = <&factory 0x28>; + + mediatek,portmap = "llllw"; +}; + +&wmac { + pinctrl-names = "default"; + pinctrl-0 = <&pa_pins>; + + ralink,mtd-eeprom = <&factory 0x0>; + mtd-mac-address = <&factory 0x28>; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + mtd-mac-address = <&factory 0x28>; + mtd-mac-address-increment = <2>; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts b/target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts index 8f6bf971ec..63952d3e64 100644 --- a/target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts +++ b/target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts @@ -1,9 +1,6 @@ /dts-v1/; -#include "mt7620a.dtsi" - -#include -#include +#include "mt7620a_cameo_810.dtsi" / { compatible = "dlink,dir-810l", "ralink,mt7620a-soc"; @@ -17,22 +14,6 @@ label-mac-device = ðernet; }; - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - leds { compatible = "gpio-leds"; @@ -53,70 +34,6 @@ }; }; -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - factory5g: partition@50000 { - label = "factory5g"; - reg = <0x50000 0x10000>; - read-only; - }; - - partition@60000 { - label = "Wolf_Config"; - reg = <0x60000 0x10000>; - read-only; - }; - - partition@70000 { - label = "MyDlink"; - reg = <0x70000 0x80000>; - read-only; - }; - - partition@f0000 { - label = "Jffs2"; - reg = <0xf0000 0x80000>; - read-only; - }; - - partition@170000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x170000 0x690000>; - }; - }; - }; -}; - &state_default { gpio { groups = "i2c", "uartf"; @@ -124,37 +41,9 @@ }; }; -ðernet { - mtd-mac-address = <&factory 0x28>; - - mediatek,portmap = "llllw"; -}; - &gsw { pinctrl-names = "default"; pinctrl-0 = <&ephy_pins>; mediatek,port4 = "ephy"; }; - -&pcie { - status = "okay"; -}; - -&wmac { - pinctrl-names = "default"; - pinctrl-0 = <&pa_pins>; - - ralink,mtd-eeprom = <&factory 0x0>; - mtd-mac-address = <&factory 0x28>; -}; - -&pcie0 { - wifi@0,0 { - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&factory 0x8000>; - ieee80211-freq-limit = <5000000 6000000>; - mtd-mac-address = <&factory 0x28>; - mtd-mac-address-increment = <2>; - }; -}; diff --git a/target/linux/ramips/dts/mt7620a_trendnet_tew-810dr.dts b/target/linux/ramips/dts/mt7620a_trendnet_tew-810dr.dts index 24d5fcb51f..679b429b6d 100644 --- a/target/linux/ramips/dts/mt7620a_trendnet_tew-810dr.dts +++ b/target/linux/ramips/dts/mt7620a_trendnet_tew-810dr.dts @@ -1,10 +1,7 @@ //SPDX-License-Identifier: GPL-2.0-or-later OR MIT /dts-v1/; -#include "mt7620a.dtsi" - -#include -#include +#include "mt7620a_cameo_810.dtsi" / { compatible = "trendnet,tew-810dr", "ralink,mt7620a-soc"; @@ -18,22 +15,6 @@ label-mac-device = ðernet; }; - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - leds { compatible = "gpio-leds"; @@ -59,70 +40,6 @@ }; }; -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - factory5g: partition@50000 { - label = "factory5g"; - reg = <0x50000 0x10000>; - read-only; - }; - - partition@60000 { - label = "Wolf_Config"; - reg = <0x60000 0x10000>; - read-only; - }; - - partition@70000 { - label = "MyDlink"; - reg = <0x70000 0x80000>; - read-only; - }; - - partition@f0000 { - label = "Jffs2"; - reg = <0xf0000 0x80000>; - read-only; - }; - - partition@170000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x170000 0x690000>; - }; - }; - }; -}; - &state_default { gpio { groups = "i2c", "uartf", "ephy"; @@ -130,37 +47,10 @@ }; }; -ðernet { - mtd-mac-address = <&factory 0x28>; - mediatek,portmap = "llllw"; -}; - &gsw { mediatek,port4 = "ephy"; }; -&pcie { - status = "okay"; -}; - -&wmac { - pinctrl-names = "default"; - pinctrl-0 = <&pa_pins>; - - ralink,mtd-eeprom = <&factory 0x0>; - mtd-mac-address = <&factory 0x28>; -}; - -&pcie0 { - wifi@0,0 { - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&factory 0x8000>; - ieee80211-freq-limit = <5000000 6000000>; - mtd-mac-address = <&factory 0x28>; - mtd-mac-address-increment = <2>; - }; -}; - &gpio2 { status = "okay"; };