ath79: add support for TP-Link TL-WA801ND v3/v4 openwrt-19.07
authorAdrian Schmutzler <freifunk@adrianschmutzler.de>
Tue, 16 Jun 2020 13:14:18 +0000 (15:14 +0200)
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>
Sun, 21 Jun 2020 19:34:09 +0000 (21:34 +0200)
This ports support for these devices from ar71xx.

Specification:

- System-On-Chip: Qualcomm Atheros QCA9533
- CPU/Speed: v3: 560 MHz, v4: 650 MHz
- Flash: 4096 KiB
- RAM: 32 MiB
- Ethernet: 1 port @ 100M
- Wireless: SoC-integrated: QCA9533 2.4GHz 802.11bgn

In contrast to the implementation in ar71xx (reset and WiFi button),
the device actually features reset and WPS buttons.

Flashing instructions:

Upload the ...-factory.bin file via OEM web interface.

TFTP Recovery:

1. Set PC to fixed IP address 192.168.0.66
2. Download *-factory.bin image and rename it to
   wa801ndv3_tp_recovery.bin
3. Start a tftp server with the image file in its root directory
4. Turn off the router
5. Press and hold Reset button
6. Turn on router with the reset button pressed and wait ~15 seconds
7. Release the reset button and after a short time
   the firmware should be transferred from the tftp server
8. Wait ~30 second to complete recovery.

TFTP recovery has only been tested with v3, and the Wiki states
that the procedure won't work for v4, which cannot be verified
or falsified at the moment.

Tested by Tim Ward (see forum):
https://forum.openwrt.org/t/ath79-support-for-tp-link-tl-wa901nd-v3-v4-v5/61246/13

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 9a477b833ab2aea96b9eee55acb5f9e7b01b36d8)

target/linux/ath79/base-files/etc/board.d/01_leds
target/linux/ath79/base-files/etc/board.d/02_network
target/linux/ath79/dts/qca9533_tplink_tl-wa801nd-v3.dts [new file with mode: 0644]
target/linux/ath79/dts/qca9533_tplink_tl-wa801nd-v4.dts [new file with mode: 0644]
target/linux/ath79/dts/qca9533_tplink_tl-wa801nd.dtsi [new file with mode: 0644]
target/linux/ath79/image/tiny-tp-link.mk

index 058ab006e5e16afd61b6e03ab6e83b4c20af2660..3c939a643b79ebc3bc64f2edd83063b45f5ed680 100755 (executable)
@@ -174,6 +174,8 @@ tplink,tl-mr3040-v2|\
 tplink,tl-wa701nd-v1|\
 tplink,tl-wa730re-v1|\
 tplink,tl-wa801nd-v1|\
+tplink,tl-wa801nd-v3|\
+tplink,tl-wa801nd-v4|\
 tplink,tl-wa830re-v1|\
 tplink,tl-wa860re-v1|\
 tplink,tl-wa901nd-v1|\
index f6efc4d4d658c29459205f29e537066e03870afa..5dda551caae0429880ee9d5965bfb6797d218e6d 100755 (executable)
@@ -34,6 +34,8 @@ ath79_setup_interfaces()
        tplink,tl-wa701nd-v1|\
        tplink,tl-wa730re-v1|\
        tplink,tl-wa801nd-v1|\
+       tplink,tl-wa801nd-v3|\
+       tplink,tl-wa801nd-v4|\
        tplink,tl-wa830re-v1|\
        tplink,tl-wa850re-v1|\
        tplink,tl-wa860re-v1|\
diff --git a/target/linux/ath79/dts/qca9533_tplink_tl-wa801nd-v3.dts b/target/linux/ath79/dts/qca9533_tplink_tl-wa801nd-v3.dts
new file mode 100644 (file)
index 0000000..c809dd6
--- /dev/null
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "qca9533_tplink_tl-wa801nd.dtsi"
+
+/ {
+       compatible = "tplink,tl-wa801nd-v3", "qca,qca9533";
+       model = "TP-Link TL-WA801ND v3";
+};
diff --git a/target/linux/ath79/dts/qca9533_tplink_tl-wa801nd-v4.dts b/target/linux/ath79/dts/qca9533_tplink_tl-wa801nd-v4.dts
new file mode 100644 (file)
index 0000000..cf9c61c
--- /dev/null
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "qca9533_tplink_tl-wa801nd.dtsi"
+
+/ {
+       compatible = "tplink,tl-wa801nd-v4", "qca,qca9533";
+       model = "TP-Link TL-WA801ND v4";
+};
diff --git a/target/linux/ath79/dts/qca9533_tplink_tl-wa801nd.dtsi b/target/linux/ath79/dts/qca9533_tplink_tl-wa801nd.dtsi
new file mode 100644 (file)
index 0000000..e1d0db8
--- /dev/null
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca953x.dtsi"
+
+/ {
+       aliases {
+               led-boot = &led_system;
+               led-failsafe = &led_system;
+               led-running = &led_system;
+               led-upgrade = &led_system;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200n8";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               lan {
+                       label = "tp-link:green:lan";
+                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+               };
+
+               security_red {
+                       label = "tp-link:red:security";
+                       gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+               };
+
+               wlan {
+                       label = "tp-link:green:wlan";
+                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy0tpt";
+               };
+
+               led_system: system {
+                       label = "tp-link:green:system";
+                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+               };
+
+               security_green {
+                       label = "tp-link:green:security";
+                       gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+               };
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "Reset button";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+               };
+
+               wps {
+                       label = "WPS button";
+                       linux,code = <KEY_WPS_BUTTON>;
+                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+               };
+       };
+};
+
+&uart {
+       status = "okay";
+};
+
+&spi {
+       status = "okay";
+
+       num-cs = <1>;
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <25000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       uboot: partition@0 {
+                               label = "u-boot";
+                               reg = <0x000000 0x020000>;
+                               read-only;
+                       };
+
+                       partition@20000 {
+                               compatible = "tplink,firmware";
+                               label = "firmware";
+                               reg = <0x020000 0x3d0000>;
+                       };
+
+                       art: partition@3f0000 {
+                               label = "art";
+                               reg = <0x3f0000 0x010000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&eth0 {
+       status = "okay";
+
+       phy-handle = <&swphy4>;
+
+       mtd-mac-address = <&uboot 0x1fc00>;
+};
+
+&eth1 {
+       compatible = "syscon", "simple-mfd";
+};
+
+&wmac {
+       status = "okay";
+
+       mtd-cal-data = <&art 0x1000>;
+       mtd-mac-address = <&uboot 0x1fc00>;
+};
index c0909217a1f00ebe75c011c2e218a78dae693220..9366436a2ce9c1ac3244daf4fe4b3b6b4b8458e4 100644 (file)
@@ -88,6 +88,24 @@ define Device/tplink_tl-wa801nd-v1
 endef
 TARGET_DEVICES += tplink_tl-wa801nd-v1
 
+define Device/tplink_tl-wa801nd-v3
+  $(Device/tplink-4mlzma)
+  ATH_SOC := qca9533
+  DEVICE_TITLE := TP-Link TL-WA801ND v3
+  TPLINK_HWID := 0x08010003
+  SUPPORTED_DEVICES += tl-wa801nd-v3
+endef
+TARGET_DEVICES += tplink_tl-wa801nd-v3
+
+define Device/tplink_tl-wa801nd-v4
+  $(Device/tplink-4mlzma)
+  ATH_SOC := qca9533
+  DEVICE_TITLE := TP-Link TL-WA801ND v4
+  TPLINK_HWID := 0x08010004
+  SUPPORTED_DEVICES += tl-wa801nd-v3
+endef
+TARGET_DEVICES += tplink_tl-wa801nd-v4
+
 define Device/tplink_tl-wa830re-v1
   $(Device/tplink-4m)
   ATH_SOC := ar7240