};
};
+ host1x@50000000 {
+ compatible = "nvidia,tegra124-host1x", "simple-bus";
+ reg = <0x50000000 0x00034000>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
+ <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+ clocks = <&tegra_car TEGRA124_CLK_HOST1X>;
+ resets = <&tegra_car 28>;
+ reset-names = "host1x";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0x54000000 0x54000000 0x01000000>;
+
+ dc@54200000 {
+ compatible = "nvidia,tegra124-dc";
+ reg = <0x54200000 0x00040000>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_DISP1>,
+ <&tegra_car TEGRA124_CLK_PLL_P>;
+ clock-names = "dc", "parent";
+ resets = <&tegra_car 27>;
+ reset-names = "dc";
+
+ nvidia,head = <0>;
+ };
+
+ dc@54240000 {
+ compatible = "nvidia,tegra124-dc";
+ reg = <0x54240000 0x00040000>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_DISP2>,
+ <&tegra_car TEGRA124_CLK_PLL_P>;
+ clock-names = "dc", "parent";
+ resets = <&tegra_car 26>;
+ reset-names = "dc";
+
+ nvidia,head = <1>;
+ };
+
+ hdmi@54280000 {
+ compatible = "nvidia,tegra124-hdmi";
+ reg = <0x54280000 0x00040000>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_HDMI>,
+ <&tegra_car TEGRA124_CLK_PLL_D2_OUT0>;
+ clock-names = "hdmi", "parent";
+ resets = <&tegra_car 51>;
+ reset-names = "hdmi";
+ status = "disabled";
+ };
+
+ sor@54540000 {
+ compatible = "nvidia,tegra124-sor";
+ reg = <0x54540000 0x00040000>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_SOR0>,
+ <&tegra_car TEGRA124_CLK_PLL_D_OUT0>,
+ <&tegra_car TEGRA124_CLK_PLL_DP>,
+ <&tegra_car TEGRA124_CLK_CLK_M>;
+ clock-names = "sor", "parent", "dp", "safe";
+ resets = <&tegra_car 182>;
+ reset-names = "sor";
+ status = "disabled";
+ };
+
+ dpaux: dpaux@545c0000 {
+ compatible = "nvidia,tegra124-dpaux";
+ reg = <0x545c0000 0x00040000>;
+ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_DPAUX>,
+ <&tegra_car TEGRA124_CLK_PLL_DP>;
+ clock-names = "dpaux", "parent";
+ resets = <&tegra_car 181>;
+ reset-names = "dpaux";
+ status = "disabled";
+ };
+ };
+
gic: interrupt-controller@50041000 {
compatible = "arm,cortex-a15-gic";
#interrupt-cells = <3>;
clocks = <&tegra_car 105>;
};
+ pmc@7000e400 {
+ compatible = "nvidia,tegra124-pmc";
+ reg = <0x7000e400 0x400>;
+ };
+
padctl: padctl@7009f000 {
compatible = "nvidia,tegra124-xusb-padctl";
reg = <0x7009f000 0x1000>;
--- /dev/null
+NVIDIA Tegra host1x
+
+Required properties:
+- compatible: "nvidia,tegra<chip>-host1x"
+- reg: Physical base address and length of the controller's registers.
+- interrupts: The interrupt outputs from the controller.
+- #address-cells: The number of cells used to represent physical base addresses
+ in the host1x address space. Should be 1.
+- #size-cells: The number of cells used to represent the size of an address
+ range in the host1x address space. Should be 1.
+- ranges: The mapping of the host1x address space to the CPU address space.
+- clocks: Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+ - host1x
+
+The host1x top-level node defines a number of children, each representing one
+of the following host1x client modules:
+
+- mpe: video encoder
+
+ Required properties:
+ - compatible: "nvidia,tegra<chip>-mpe"
+ - reg: Physical base address and length of the controller's registers.
+ - interrupts: The interrupt outputs from the controller.
+ - clocks: Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
+ - resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+ - reset-names: Must include the following entries:
+ - mpe
+
+- vi: video input
+
+ Required properties:
+ - compatible: "nvidia,tegra<chip>-vi"
+ - reg: Physical base address and length of the controller's registers.
+ - interrupts: The interrupt outputs from the controller.
+ - clocks: Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
+ - resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+ - reset-names: Must include the following entries:
+ - vi
+
+- epp: encoder pre-processor
+
+ Required properties:
+ - compatible: "nvidia,tegra<chip>-epp"
+ - reg: Physical base address and length of the controller's registers.
+ - interrupts: The interrupt outputs from the controller.
+ - clocks: Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
+ - resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+ - reset-names: Must include the following entries:
+ - epp
+
+- isp: image signal processor
+
+ Required properties:
+ - compatible: "nvidia,tegra<chip>-isp"
+ - reg: Physical base address and length of the controller's registers.
+ - interrupts: The interrupt outputs from the controller.
+ - clocks: Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
+ - resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+ - reset-names: Must include the following entries:
+ - isp
+
+- gr2d: 2D graphics engine
+
+ Required properties:
+ - compatible: "nvidia,tegra<chip>-gr2d"
+ - reg: Physical base address and length of the controller's registers.
+ - interrupts: The interrupt outputs from the controller.
+ - clocks: Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
+ - resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+ - reset-names: Must include the following entries:
+ - 2d
+
+- gr3d: 3D graphics engine
+
+ Required properties:
+ - compatible: "nvidia,tegra<chip>-gr3d"
+ - reg: Physical base address and length of the controller's registers.
+ - clocks: Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+ - clock-names: Must include the following entries:
+ (This property may be omitted if the only clock in the list is "3d")
+ - 3d
+ This MUST be the first entry.
+ - 3d2 (Only required on SoCs with two 3D clocks)
+ - resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+ - reset-names: Must include the following entries:
+ - 3d
+ - 3d2 (Only required on SoCs with two 3D clocks)
+
+- dc: display controller
+
+ Required properties:
+ - compatible: "nvidia,tegra<chip>-dc"
+ - reg: Physical base address and length of the controller's registers.
+ - interrupts: The interrupt outputs from the controller.
+ - clocks: Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+ - clock-names: Must include the following entries:
+ - dc
+ This MUST be the first entry.
+ - parent
+ - resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+ - reset-names: Must include the following entries:
+ - dc
+ - nvidia,head: The number of the display controller head. This is used to
+ setup the various types of output to receive video data from the given
+ head.
+
+ Each display controller node has a child node, named "rgb", that represents
+ the RGB output associated with the controller. It can take the following
+ optional properties:
+ - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
+ - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
+ - nvidia,edid: supplies a binary EDID blob
+ - nvidia,panel: phandle of a display panel
+
+- hdmi: High Definition Multimedia Interface
+
+ Required properties:
+ - compatible: "nvidia,tegra<chip>-hdmi"
+ - reg: Physical base address and length of the controller's registers.
+ - interrupts: The interrupt outputs from the controller.
+ - hdmi-supply: supply for the +5V HDMI connector pin
+ - vdd-supply: regulator for supply voltage
+ - pll-supply: regulator for PLL
+ - clocks: Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+ - clock-names: Must include the following entries:
+ - hdmi
+ This MUST be the first entry.
+ - parent
+ - resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+ - reset-names: Must include the following entries:
+ - hdmi
+
+ Optional properties:
+ - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
+ - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
+ - nvidia,edid: supplies a binary EDID blob
+ - nvidia,panel: phandle of a display panel
+
+- tvo: TV encoder output
+
+ Required properties:
+ - compatible: "nvidia,tegra<chip>-tvo"
+ - reg: Physical base address and length of the controller's registers.
+ - interrupts: The interrupt outputs from the controller.
+ - clocks: Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
+
+- dsi: display serial interface
+
+ Required properties:
+ - compatible: "nvidia,tegra<chip>-dsi"
+ - reg: Physical base address and length of the controller's registers.
+ - clocks: Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+ - clock-names: Must include the following entries:
+ - dsi
+ This MUST be the first entry.
+ - lp
+ - parent
+ - resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+ - reset-names: Must include the following entries:
+ - dsi
+ - avdd-dsi-supply: phandle of a supply that powers the DSI controller
+ - nvidia,mipi-calibrate: Should contain a phandle and a specifier specifying
+ which pads are used by this DSI output and need to be calibrated. See also
+ ../mipi/nvidia,tegra114-mipi.txt.
+
+ Optional properties:
+ - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
+ - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
+ - nvidia,edid: supplies a binary EDID blob
+ - nvidia,panel: phandle of a display panel
+
+- sor: serial output resource
+
+ Required properties:
+ - compatible: "nvidia,tegra124-sor"
+ - reg: Physical base address and length of the controller's registers.
+ - interrupts: The interrupt outputs from the controller.
+ - clocks: Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+ - clock-names: Must include the following entries:
+ - sor: clock input for the SOR hardware
+ - parent: input for the pixel clock
+ - dp: reference clock for the SOR clock
+ - safe: safe reference for the SOR clock during power up
+ - resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+ - reset-names: Must include the following entries:
+ - sor
+
+ Optional properties:
+ - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
+ - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
+ - nvidia,edid: supplies a binary EDID blob
+ - nvidia,panel: phandle of a display panel
+
+ Optional properties when driving an eDP output:
+ - nvidia,dpaux: phandle to a DispayPort AUX interface
+
+- dpaux: DisplayPort AUX interface
+ - compatible: "nvidia,tegra124-dpaux"
+ - reg: Physical base address and length of the controller's registers.
+ - interrupts: The interrupt outputs from the controller.
+ - clocks: Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+ - clock-names: Must include the following entries:
+ - dpaux: clock input for the DPAUX hardware
+ - parent: reference clock
+ - resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+ - reset-names: Must include the following entries:
+ - dpaux
+ - vdd-supply: phandle of a supply that powers the DisplayPort link
+
+Example:
+
+/ {
+ ...
+
+ host1x {
+ compatible = "nvidia,tegra20-host1x", "simple-bus";
+ reg = <0x50000000 0x00024000>;
+ interrupts = <0 65 0x04 /* mpcore syncpt */
+ 0 67 0x04>; /* mpcore general */
+ clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
+ resets = <&tegra_car 28>;
+ reset-names = "host1x";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0x54000000 0x54000000 0x04000000>;
+
+ mpe {
+ compatible = "nvidia,tegra20-mpe";
+ reg = <0x54040000 0x00040000>;
+ interrupts = <0 68 0x04>;
+ clocks = <&tegra_car TEGRA20_CLK_MPE>;
+ resets = <&tegra_car 60>;
+ reset-names = "mpe";
+ };
+
+ vi {
+ compatible = "nvidia,tegra20-vi";
+ reg = <0x54080000 0x00040000>;
+ interrupts = <0 69 0x04>;
+ clocks = <&tegra_car TEGRA20_CLK_VI>;
+ resets = <&tegra_car 100>;
+ reset-names = "vi";
+ };
+
+ epp {
+ compatible = "nvidia,tegra20-epp";
+ reg = <0x540c0000 0x00040000>;
+ interrupts = <0 70 0x04>;
+ clocks = <&tegra_car TEGRA20_CLK_EPP>;
+ resets = <&tegra_car 19>;
+ reset-names = "epp";
+ };
+
+ isp {
+ compatible = "nvidia,tegra20-isp";
+ reg = <0x54100000 0x00040000>;
+ interrupts = <0 71 0x04>;
+ clocks = <&tegra_car TEGRA20_CLK_ISP>;
+ resets = <&tegra_car 23>;
+ reset-names = "isp";
+ };
+
+ gr2d {
+ compatible = "nvidia,tegra20-gr2d";
+ reg = <0x54140000 0x00040000>;
+ interrupts = <0 72 0x04>;
+ clocks = <&tegra_car TEGRA20_CLK_GR2D>;
+ resets = <&tegra_car 21>;
+ reset-names = "2d";
+ };
+
+ gr3d {
+ compatible = "nvidia,tegra20-gr3d";
+ reg = <0x54180000 0x00040000>;
+ clocks = <&tegra_car TEGRA20_CLK_GR3D>;
+ resets = <&tegra_car 24>;
+ reset-names = "3d";
+ };
+
+ dc@54200000 {
+ compatible = "nvidia,tegra20-dc";
+ reg = <0x54200000 0x00040000>;
+ interrupts = <0 73 0x04>;
+ clocks = <&tegra_car TEGRA20_CLK_DISP1>,
+ <&tegra_car TEGRA20_CLK_PLL_P>;
+ clock-names = "dc", "parent";
+ resets = <&tegra_car 27>;
+ reset-names = "dc";
+
+ rgb {
+ status = "disabled";
+ };
+ };
+
+ dc@54240000 {
+ compatible = "nvidia,tegra20-dc";
+ reg = <0x54240000 0x00040000>;
+ interrupts = <0 74 0x04>;
+ clocks = <&tegra_car TEGRA20_CLK_DISP2>,
+ <&tegra_car TEGRA20_CLK_PLL_P>;
+ clock-names = "dc", "parent";
+ resets = <&tegra_car 26>;
+ reset-names = "dc";
+
+ rgb {
+ status = "disabled";
+ };
+ };
+
+ hdmi {
+ compatible = "nvidia,tegra20-hdmi";
+ reg = <0x54280000 0x00040000>;
+ interrupts = <0 75 0x04>;
+ clocks = <&tegra_car TEGRA20_CLK_HDMI>,
+ <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
+ clock-names = "hdmi", "parent";
+ resets = <&tegra_car 51>;
+ reset-names = "hdmi";
+ status = "disabled";
+ };
+
+ tvo {
+ compatible = "nvidia,tegra20-tvo";
+ reg = <0x542c0000 0x00040000>;
+ interrupts = <0 76 0x04>;
+ clocks = <&tegra_car TEGRA20_CLK_TVO>;
+ status = "disabled";
+ };
+
+ dsi {
+ compatible = "nvidia,tegra20-dsi";
+ reg = <0x54300000 0x00040000>;
+ clocks = <&tegra_car TEGRA20_CLK_DSI>,
+ <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
+ clock-names = "dsi", "parent";
+ resets = <&tegra_car 48>;
+ reset-names = "dsi";
+ status = "disabled";
+ };
+ };
+
+ ...
+};
projects / oweals / u-boot.git / commitdiff