*
* SPDX-License-Identifier: GPL-2.0+
*/
+
#include <common.h>
#include <spi.h>
#include <malloc.h>
#include <asm/io.h>
#include <asm/arch/hardware.h>
-struct davinci_spi_regs {
- dv_reg gcr0; /* 0x00 */
- dv_reg gcr1; /* 0x04 */
- dv_reg int0; /* 0x08 */
- dv_reg lvl; /* 0x0c */
- dv_reg flg; /* 0x10 */
- dv_reg pc0; /* 0x14 */
- dv_reg pc1; /* 0x18 */
- dv_reg pc2; /* 0x1c */
- dv_reg pc3; /* 0x20 */
- dv_reg pc4; /* 0x24 */
- dv_reg pc5; /* 0x28 */
- dv_reg rsvd[3];
- dv_reg dat0; /* 0x38 */
- dv_reg dat1; /* 0x3c */
- dv_reg buf; /* 0x40 */
- dv_reg emu; /* 0x44 */
- dv_reg delay; /* 0x48 */
- dv_reg def; /* 0x4c */
- dv_reg fmt0; /* 0x50 */
- dv_reg fmt1; /* 0x54 */
- dv_reg fmt2; /* 0x58 */
- dv_reg fmt3; /* 0x5c */
- dv_reg intvec0; /* 0x60 */
- dv_reg intvec1; /* 0x64 */
-};
-
#define BIT(x) (1 << (x))
/* SPIGCR0 */
#define SPI2_BASE CONFIG_SYS_SPI2_BASE
#endif
+/* davinci spi register set */
+struct davinci_spi_regs {
+ dv_reg gcr0; /* 0x00 */
+ dv_reg gcr1; /* 0x04 */
+ dv_reg int0; /* 0x08 */
+ dv_reg lvl; /* 0x0c */
+ dv_reg flg; /* 0x10 */
+ dv_reg pc0; /* 0x14 */
+ dv_reg pc1; /* 0x18 */
+ dv_reg pc2; /* 0x1c */
+ dv_reg pc3; /* 0x20 */
+ dv_reg pc4; /* 0x24 */
+ dv_reg pc5; /* 0x28 */
+ dv_reg rsvd[3];
+ dv_reg dat0; /* 0x38 */
+ dv_reg dat1; /* 0x3c */
+ dv_reg buf; /* 0x40 */
+ dv_reg emu; /* 0x44 */
+ dv_reg delay; /* 0x48 */
+ dv_reg def; /* 0x4c */
+ dv_reg fmt0; /* 0x50 */
+ dv_reg fmt1; /* 0x54 */
+ dv_reg fmt2; /* 0x58 */
+ dv_reg fmt3; /* 0x5c */
+ dv_reg intvec0; /* 0x60 */
+ dv_reg intvec1; /* 0x64 */
+};
+
+/* davinci spi slave */
struct davinci_spi_slave {
struct spi_slave slave;
struct davinci_spi_regs *regs;
return container_of(slave, struct davinci_spi_slave, slave);
}
-void spi_init()
-{
- /* do nothing */
-}
-
-struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
- unsigned int max_hz, unsigned int mode)
-{
- struct davinci_spi_slave *ds;
-
- if (!spi_cs_is_valid(bus, cs))
- return NULL;
-
- ds = spi_alloc_slave(struct davinci_spi_slave, bus, cs);
- if (!ds)
- return NULL;
-
- switch (bus) {
- case SPI0_BUS:
- ds->regs = (struct davinci_spi_regs *)SPI0_BASE;
- break;
-#ifdef CONFIG_SYS_SPI1
- case SPI1_BUS:
- ds->regs = (struct davinci_spi_regs *)SPI1_BASE;
- break;
-#endif
-#ifdef CONFIG_SYS_SPI2
- case SPI2_BUS:
- ds->regs = (struct davinci_spi_regs *)SPI2_BASE;
- break;
-#endif
- default: /* Invalid bus number */
- return NULL;
- }
-
- ds->freq = max_hz;
-
- return &ds->slave;
-}
-
-void spi_free_slave(struct spi_slave *slave)
-{
- struct davinci_spi_slave *ds = to_davinci_spi(slave);
-
- free(ds);
-}
-
-int spi_claim_bus(struct spi_slave *slave)
-{
- struct davinci_spi_slave *ds = to_davinci_spi(slave);
- unsigned int scalar;
-
- /* Enable the SPI hardware */
- writel(SPIGCR0_SPIRST_MASK, &ds->regs->gcr0);
- udelay(1000);
- writel(SPIGCR0_SPIENA_MASK, &ds->regs->gcr0);
-
- /* Set master mode, powered up and not activated */
- writel(SPIGCR1_MASTER_MASK | SPIGCR1_CLKMOD_MASK, &ds->regs->gcr1);
-
- /* CS, CLK, SIMO and SOMI are functional pins */
- writel(((1 << slave->cs) | SPIPC0_CLKFUN_MASK |
- SPIPC0_DOFUN_MASK | SPIPC0_DIFUN_MASK), &ds->regs->pc0);
-
- /* setup format */
- scalar = ((CONFIG_SYS_SPI_CLK / ds->freq) - 1) & 0xFF;
-
- /*
- * Use following format:
- * character length = 8,
- * clock signal delayed by half clk cycle,
- * clock low in idle state - Mode 0,
- * MSB shifted out first
- */
- writel(8 | (scalar << SPIFMT_PRESCALE_SHIFT) |
- (1 << SPIFMT_PHASE_SHIFT), &ds->regs->fmt0);
-
- /*
- * Including a minor delay. No science here. Should be good even with
- * no delay
- */
- writel((50 << SPI_C2TDELAY_SHIFT) |
- (50 << SPI_T2CDELAY_SHIFT), &ds->regs->delay);
-
- /* default chip select register */
- writel(SPIDEF_CSDEF0_MASK, &ds->regs->def);
-
- /* no interrupts */
- writel(0, &ds->regs->int0);
- writel(0, &ds->regs->lvl);
-
- /* enable SPI */
- writel((readl(&ds->regs->gcr1) | SPIGCR1_SPIENA_MASK), &ds->regs->gcr1);
-
- return 0;
-}
-
-void spi_release_bus(struct spi_slave *slave)
-{
- struct davinci_spi_slave *ds = to_davinci_spi(slave);
-
- /* Disable the SPI hardware */
- writel(SPIGCR0_SPIRST_MASK, &ds->regs->gcr0);
-}
-
/*
* This functions needs to act like a macro to avoid pipeline reloads in the
* loops below. Use always_inline. This gains us about 160KiB/s and the bloat
}
#endif
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ int ret = 0;
+
+ switch (bus) {
+ case SPI0_BUS:
+ if (cs < SPI0_NUM_CS)
+ ret = 1;
+ break;
+#ifdef CONFIG_SYS_SPI1
+ case SPI1_BUS:
+ if (cs < SPI1_NUM_CS)
+ ret = 1;
+ break;
+#endif
+#ifdef CONFIG_SYS_SPI2
+ case SPI2_BUS:
+ if (cs < SPI2_NUM_CS)
+ ret = 1;
+ break;
+#endif
+ default:
+ /* Invalid bus number. Do nothing */
+ break;
+ }
+ return ret;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+ /* do nothing */
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ /* do nothing */
+}
+
+void spi_init(void)
+{
+ /* do nothing */
+}
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ struct davinci_spi_slave *ds;
+
+ if (!spi_cs_is_valid(bus, cs))
+ return NULL;
+
+ ds = spi_alloc_slave(struct davinci_spi_slave, bus, cs);
+ if (!ds)
+ return NULL;
+
+ switch (bus) {
+ case SPI0_BUS:
+ ds->regs = (struct davinci_spi_regs *)SPI0_BASE;
+ break;
+#ifdef CONFIG_SYS_SPI1
+ case SPI1_BUS:
+ ds->regs = (struct davinci_spi_regs *)SPI1_BASE;
+ break;
+#endif
+#ifdef CONFIG_SYS_SPI2
+ case SPI2_BUS:
+ ds->regs = (struct davinci_spi_regs *)SPI2_BASE;
+ break;
+#endif
+ default: /* Invalid bus number */
+ return NULL;
+ }
+
+ ds->freq = max_hz;
+
+ return &ds->slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+ struct davinci_spi_slave *ds = to_davinci_spi(slave);
+
+ free(ds);
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+ struct davinci_spi_slave *ds = to_davinci_spi(slave);
+ unsigned int scalar;
+
+ /* Enable the SPI hardware */
+ writel(SPIGCR0_SPIRST_MASK, &ds->regs->gcr0);
+ udelay(1000);
+ writel(SPIGCR0_SPIENA_MASK, &ds->regs->gcr0);
+
+ /* Set master mode, powered up and not activated */
+ writel(SPIGCR1_MASTER_MASK | SPIGCR1_CLKMOD_MASK, &ds->regs->gcr1);
+
+ /* CS, CLK, SIMO and SOMI are functional pins */
+ writel(((1 << slave->cs) | SPIPC0_CLKFUN_MASK |
+ SPIPC0_DOFUN_MASK | SPIPC0_DIFUN_MASK), &ds->regs->pc0);
+
+ /* setup format */
+ scalar = ((CONFIG_SYS_SPI_CLK / ds->freq) - 1) & 0xFF;
+
+ /*
+ * Use following format:
+ * character length = 8,
+ * clock signal delayed by half clk cycle,
+ * clock low in idle state - Mode 0,
+ * MSB shifted out first
+ */
+ writel(8 | (scalar << SPIFMT_PRESCALE_SHIFT) |
+ (1 << SPIFMT_PHASE_SHIFT), &ds->regs->fmt0);
+
+ /*
+ * Including a minor delay. No science here. Should be good even with
+ * no delay
+ */
+ writel((50 << SPI_C2TDELAY_SHIFT) |
+ (50 << SPI_T2CDELAY_SHIFT), &ds->regs->delay);
+
+ /* default chip select register */
+ writel(SPIDEF_CSDEF0_MASK, &ds->regs->def);
+
+ /* no interrupts */
+ writel(0, &ds->regs->int0);
+ writel(0, &ds->regs->lvl);
+
+ /* enable SPI */
+ writel((readl(&ds->regs->gcr1) | SPIGCR1_SPIENA_MASK), &ds->regs->gcr1);
+
+ return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+ struct davinci_spi_slave *ds = to_davinci_spi(slave);
+
+ /* Disable the SPI hardware */
+ writel(SPIGCR0_SPIRST_MASK, &ds->regs->gcr0);
+}
+
int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
const void *dout, void *din, unsigned long flags)
{
}
return 0;
}
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
- int ret = 0;
-
- switch (bus) {
- case SPI0_BUS:
- if (cs < SPI0_NUM_CS)
- ret = 1;
- break;
-#ifdef CONFIG_SYS_SPI1
- case SPI1_BUS:
- if (cs < SPI1_NUM_CS)
- ret = 1;
- break;
-#endif
-#ifdef CONFIG_SYS_SPI2
- case SPI2_BUS:
- if (cs < SPI2_NUM_CS)
- ret = 1;
- break;
-#endif
- default:
- /* Invalid bus number. Do nothing */
- break;
- }
- return ret;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
- /* do nothing */
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
- /* do nothing */
-}
projects / oweals / u-boot.git / commitdiff