digsy_mtc: Update default environment

Signed-off-by: Detlev Zundel <dzu@denx.de>

diff --git a/include/configs/digsy_mtc.h b/include/configs/digsy_mtc.h
index 6ccebfaf8c79a851a4a7fa088f72e4df91017e47..2bdaaace33b6ff10a58df1c47373c8684e55f3fd 100644 (file)
--- a/include/configs/digsy_mtc.h
+++ b/include/configs/digsy_mtc.h
@@ -114,29 +114,109 @@
 
 #undef CONFIG_BOOTARGS
 
-#define CONFIG_EXTRA_ENV_SETTINGS                      \
-       "netdev=eth0\0"                                 \
-       "console=ttyPSC0\0"                             \
-       "kernel_addr_r=400000\0"                        \
-       "fdt_addr_r=600000\0"                           \
-       "nfsargs=setenv bootargs root=/dev/nfs rw "     \
-       "nfsroot=${serverip}:${rootpath}\0"             \
-       "addip=setenv bootargs ${bootargs} "            \
-               "ip=${ipaddr}:${serverip}:${gatewayip}:"\
-               "${netmask}:${hostname}:${netdev}:off panic=1\0"        \
+#define CONFIG_EXTRA_ENV_SETTINGS                                      \
+       "fw_image=digsyMPC.img\0"                                       \
+       "mtcb_start=mtc led diag orange; run mtcb_1\0"                  \
+       "mtcb_clearled=for x in user1 user2 usbpwr usbbusy; "           \
+               "do mtc led $x; done\0"                                 \
+       "mtcb_1=if mtc key; then run mtcb_clearled mtcb_update; "       \
+               "else run mtcb_fw; fi\0"                                \
+       "mtcb_fw=if bootm ff000000; then echo FIRMWARE OK!; "           \
+               "else echo BAD FIRMWARE CRC!; mtc led diag red; fi\0"   \
+       "mtcb_update=mtc led user1 orange;"                             \
+               "while mtc key; do ; done; run mtcb_2;\0"               \
+       "mtcb_2=mtc led user1 green 2; usb reset; run mtcb_usb1;\0"     \
+       "mtcb_usb1=if fatload usb 0 400000 script.img; "                \
+               "then run mtcb_doscript; else run mtcb_usb2; fi\0"      \
+       "mtcb_usb2=if fatload usb 0 400000 $fw_image; "                 \
+               "then run mtcb_dousb; else run mtcb_ide; fi\0"          \
+       "mtcb_doscript=run mtcb_usbleds; mtc led user2 orange 2; "      \
+               "run mtcb_wait_flickr mtcb_ds_1;\0"                     \
+       "mtcb_ds_1=if imi 400000; then mtc led usbbusy; "               \
+               "source 400000; else run mtcb_error; fi\0"              \
+       "mtcb_dousb=run mtcb_usbleds mtcb_wait_flickr mtcb_du_1;\0"     \
+       "mtcb_du_1=if imi 400000; then run mtcb_du_2; "                 \
+               "else run mtcb_error; fi\0"                             \
+       "mtcb_du_2=run mtcb_clear mtcb_prog; mtc led usbbusy; "         \
+               "run mtcb_checkfw\0"                                    \
+       "mtcb_checkfw=if imi ff000000; then run mtcb_success; "         \
+               "else run mtcb_error; fi\0"                             \
+       "mtcb_waitkey=mtc key; until test $? -eq 0; do mtc key; done\0" \
+       "mtcb_wait_flickr=run mtcb_waitkey mtcb_uledflckr\0"            \
+       "mtcb_usbleds=mtc led usbpwr green; mtc led usbbusy orange 1;\0"\
+       "mtcb_uledflckr=mtc led user1 orange 11\0"                      \
+       "mtcb_error=mtc led user1 red\0"                                \
+       "mtcb_clear=erase ff000000 ff0fffff\0"                          \
+       "mtcb_prog=cp.b 400000 ff000000 ${filesize}\0"                  \
+       "mtcb_success=mtc led user1 green\0"                            \
+       "mtcb_ide=if fatload ide 0 400000 $fw_image;"                   \
+               "then run mtcb_doide; else run mtcb_error; fi\0"        \
+       "mtcb_doide=mtc led user2 green 1;"                             \
+               "run mtcb_wait_flickr mtcb_di_1;\0"                     \
+       "mtcb_di_1=if imi 400000; then run mtcb_di_2;"                  \
+               "else run mtcb_error; fi\0"                             \
+       "mtcb_di_2=run mtcb_clear; run mtcb_prog mtcb_checkfw\0"        \
+       "ramdisk_num_sector=16\0"                                       \
+       "flash_base=ff000000\0"                                         \
+       "flashdisk_size=e00000\0"                                       \
+       "env_sector=fff60000\0"                                         \
+       "flashdisk_start=ff100000\0"                                    \
+       "load_cmd=tftp 400000 digsyMPC.img\0"                           \
+       "clear_cmd=erase ff000000 ff0fffff\0"                           \
+       "flash_cmd=cp.b 400000 ff000000 ${filesize}\0"                  \
+       "update_cmd=run load_cmd; "                                     \
+       "iminfo 400000; "                                               \
+       "run clear_cmd flash_cmd; "                                     \
+       "iminfo ff000000\0"                                             \
+       "spi_driver=yes\0"                                              \
+       "spi_watchdog=no\0"                                             \
+       "ftps_start=yes\0"                                              \
+       "ftps_user1=admin\0"                                            \
+       "ftps_pass1=admin\0"                                            \
+       "ftps_base1=/\0"                                                \
+       "ftps_home1=/\0"                                                \
+       "plc_sio_srv=no\0"                                              \
+       "plc_sio_baud=57600\0"                                          \
+       "plc_sio_parity=no\0"                                           \
+       "plc_sio_stop=1\0"                                              \
+       "plc_sio_com=2\0"                                               \
+       "plc_eth_srv=yes\0"                                             \
+       "plc_eth_port=1200\0"                                           \
+       "plc_root=/ide/\0"                                              \
+       "diag_level=0\0"                                                \
+       "webvisu=no\0"                                                  \
+       "plc_can1_routing=no\0"                                         \
+       "plc_can1_baudrate=250\0"                                       \
+       "plc_can2_routing=no\0"                                         \
+       "plc_can2_baudrate=250\0"                                       \
+       "plc_can3_routing=no\0"                                         \
+       "plc_can3_baudrate=250\0"                                       \
+       "plc_can4_routing=no\0"                                         \
+       "plc_can4_baudrate=250\0"                                       \
+       "netdev=eth0\0"                                                 \
+       "console=ttyPSC0\0"                                             \
+       "kernel_addr_r=400000\0"                                        \
+       "fdt_addr_r=600000\0"                                           \
+       "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
+       "nfsroot=${serverip}:${rootpath}\0"                             \
+       "addip=setenv bootargs ${bootargs} "                            \
+       "ip=${ipaddr}:${serverip}:${gatewayip}:"                        \
+       "${netmask}:${hostname}:${netdev}:off panic=1\0"                \
        "addcons=setenv bootargs ${bootargs} console=${console},${baudrate}\0"\
-       "rootpath=/opt/eldk/ppc_6xx\0"                  \
-       "net_nfs=tftp ${kernel_addr_r} ${bootfile};"    \
-               "tftp ${fdt_addr_r} ${fdt_file};"       \
-               "run nfsargs addip addcons;"            \
-               "bootm ${kernel_addr_r} - ${fdt_addr_r}\0"      \
-       "load=tftp 200000 ${u-boot}\0"                  \
-       "update=protect off FFF00000 +${filesize};"     \
-               "erase FFF00000 +${filesize};"          \
-               "cp.b 200000 FFF00000 ${filesize};"     \
-               "protect on FFF00000 +${filesize}\0"    \
+       "rootpath=/opt/eldk/ppc_6xx\0"                                  \
+       "net_nfs=tftp ${kernel_addr_r} ${bootfile};"                    \
+               "tftp ${fdt_addr_r} ${fdt_file};"                       \
+               "run nfsargs addip addcons;"                            \
+               "bootm ${kernel_addr_r} - ${fdt_addr_r}\0"              \
+       "load=tftp 200000 ${u-boot}\0"                                  \
+       "update=protect off FFF00000 +${filesize};"                     \
+               "erase FFF00000 +${filesize};"                          \
+               "cp.b 200000 FFF00000 ${filesize};"                     \
+               "protect on FFF00000 +${filesize}\0"                    \
        ""
 
+#define CONFIG_BOOTCOMMAND     "run mtcb_start"
+
 /*
  * SPI configuration
  */