imx: ventana: remove several EEPROM config bit dependence
authorTim Harvey <tharvey@gateworks.com>
Tue, 24 May 2016 18:03:57 +0000 (11:03 -0700)
committerStefano Babic <sbabic@denx.de>
Tue, 31 May 2016 15:26:00 +0000 (17:26 +0200)
Removed several EEPROM bit dependencies:
 - for dt aliases that don't exist and thus don't ever do anything
   (pcie,lvds1,uart*,vpu,csi*,hdmi_in,hdmi_out,cvbs_in,cvbs_out,gps)
 - for features that don't effect bus ordering or have no detrimental affect
   if erroneously enabled when not present (ahci,nand,i2c*)
 - for features that have little to no impact on being erroneously enabled
   but high impact if erroneously disabled (can*, spi*)
 - for features that have an high adverse affect of not being set when they
   should and no adverse affect of being set when they
   shouldn't (ipu*).

Removing these means the following:
 - these no longer are supported with the econfig command
 - these no longer affect the device-tree in any way

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
board/gateworks/gw_ventana/eeprom.c

index ba159696b43cf51e85bdd71414eb1faa61fc2753..e86c98e9685392bfb000feaf39aaafd90fb0c762 100644 (file)
@@ -100,43 +100,12 @@ read_eeprom(int bus, struct ventana_board_info *info)
 /* list of config bits that the bootloader will remove from dtb if not set */
 struct ventana_eeprom_config econfig[] = {
        { "eth0", "ethernet0", EECONFIG_ETH0 },
-       { "eth1", "ethernet1", EECONFIG_ETH1 },
-       { "sata", "ahci0", EECONFIG_SATA },
-       { "pcie", NULL, EECONFIG_PCIE},
-       { "lvds0", NULL, EECONFIG_LVDS0 },
-       { "lvds1", NULL, EECONFIG_LVDS1 },
        { "usb0", NULL, EECONFIG_USB0 },
        { "usb1", NULL, EECONFIG_USB1 },
        { "mmc0", NULL, EECONFIG_SD0 },
        { "mmc1", NULL, EECONFIG_SD1 },
        { "mmc2", NULL, EECONFIG_SD2 },
        { "mmc3", NULL, EECONFIG_SD3 },
-       { "uart0", NULL, EECONFIG_UART0 },
-       { "uart1", NULL, EECONFIG_UART1 },
-       { "uart2", NULL, EECONFIG_UART2 },
-       { "uart3", NULL, EECONFIG_UART3 },
-       { "uart4", NULL, EECONFIG_UART4 },
-       { "ipu0", NULL, EECONFIG_IPU0 },
-       { "ipu1", NULL, EECONFIG_IPU1 },
-       { "can0", NULL, EECONFIG_FLEXCAN },
-       { "i2c0", NULL, EECONFIG_I2C0 },
-       { "i2c1", NULL, EECONFIG_I2C1 },
-       { "i2c2", NULL, EECONFIG_I2C2 },
-       { "vpu", NULL, EECONFIG_VPU },
-       { "csi0", NULL, EECONFIG_CSI0 },
-       { "csi1", NULL, EECONFIG_CSI1 },
-       { "spi0", NULL, EECONFIG_ESPCI0 },
-       { "spi1", NULL, EECONFIG_ESPCI1 },
-       { "spi2", NULL, EECONFIG_ESPCI2 },
-       { "spi3", NULL, EECONFIG_ESPCI3 },
-       { "spi4", NULL, EECONFIG_ESPCI4 },
-       { "spi5", NULL, EECONFIG_ESPCI5 },
-       { "gps", "pps", EECONFIG_GPS },
-       { "hdmi_in", NULL, EECONFIG_HDMI_IN },
-       { "hdmi_out", NULL, EECONFIG_HDMI_OUT },
-       { "cvbs_in", NULL, EECONFIG_VID_IN },
-       { "cvbs_out", NULL, EECONFIG_VID_OUT },
-       { "nand", NULL, EECONFIG_NAND },
        { /* Sentinel */ }
 };