default "arc"
config SYS_CPU
- default "arc700"
+ default "arcv1"
choice
prompt "Target select"
+++ /dev/null
-#
-# Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y += start.o
+++ /dev/null
-#
-# Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-PLATFORM_CPPFLAGS += -mA7
+++ /dev/null
-/*
- * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <asm-offsets.h>
-#include <config.h>
-#include <asm/arcregs.h>
-
-/*
- * Note on the LD/ST addressing modes with address register write-back
- *
- * LD.a same as LD.aw
- *
- * LD.a reg1, [reg2, x] => Pre Incr
- * Eff Addr for load = [reg2 + x]
- *
- * LD.ab reg1, [reg2, x] => Post Incr
- * Eff Addr for load = [reg2]
- */
-
-.macro PUSH reg
- st.a \reg, [%sp, -4]
-.endm
-
-.macro PUSHAX aux
- lr %r9, [\aux]
- PUSH %r9
-.endm
-
-.macro SAVE_R1_TO_R24
- PUSH %r1
- PUSH %r2
- PUSH %r3
- PUSH %r4
- PUSH %r5
- PUSH %r6
- PUSH %r7
- PUSH %r8
- PUSH %r9
- PUSH %r10
- PUSH %r11
- PUSH %r12
- PUSH %r13
- PUSH %r14
- PUSH %r15
- PUSH %r16
- PUSH %r17
- PUSH %r18
- PUSH %r19
- PUSH %r20
- PUSH %r21
- PUSH %r22
- PUSH %r23
- PUSH %r24
-.endm
-
-.macro SAVE_ALL_SYS
- /* saving %r0 to reg->r0 in advance since we read %ecr into it */
- st %r0, [%sp, -8]
- lr %r0, [%ecr] /* all stack addressing is manual so far */
- st %r0, [%sp]
- st %sp, [%sp, -4]
- /* now move %sp to reg->r0 position so we can do "push" automatically */
- sub %sp, %sp, 8
-
- SAVE_R1_TO_R24
- PUSH %r25
- PUSH %gp
- PUSH %fp
- PUSH %blink
- PUSHAX %eret
- PUSHAX %erstatus
- PUSH %lp_count
- PUSHAX %lp_end
- PUSHAX %lp_start
- PUSHAX %erbta
-.endm
-
-.macro SAVE_EXCEPTION_SOURCE
-#ifdef CONFIG_MMU
- /* If MMU exists exception faulting address is loaded in EFA reg */
- lr %r0, [%efa]
-#else
- /* Otherwise in ERET (exception return) reg */
- lr %r0, [%eret]
-#endif
-.endm
-
-.section .ivt, "ax",@progbits
-.align 4
-_ivt:
- /* Critical system events */
- j _start /* 0 - 0x000 */
- j memory_error /* 1 - 0x008 */
- j instruction_error /* 2 - 0x010 */
-
- /* Device interrupts */
-.rept 29
- j interrupt_handler /* 3:31 - 0x018:0xF8 */
-.endr
- /* Exceptions */
- j EV_MachineCheck /* 0x100, Fatal Machine check (0x20) */
- j EV_TLBMissI /* 0x108, Intruction TLB miss (0x21) */
- j EV_TLBMissD /* 0x110, Data TLB miss (0x22) */
- j EV_TLBProtV /* 0x118, Protection Violation (0x23)
- or Misaligned Access */
- j EV_PrivilegeV /* 0x120, Privilege Violation (0x24) */
- j EV_Trap /* 0x128, Trap exception (0x25) */
- j EV_Extension /* 0x130, Extn Intruction Excp (0x26) */
-
-.text
-.globl _start
-_start:
- /* Setup interrupt vector base that matches "__text_start" */
- sr __ivt_start, [ARC_AUX_INTR_VEC_BASE]
-
- /* Setup stack pointer */
- mov %sp, CONFIG_SYS_INIT_SP_ADDR
- mov %fp, %sp
-
- /* Clear bss */
- mov %r0, __bss_start
- mov %r1, __bss_end
-
-clear_bss:
- st.ab 0, [%r0, 4]
- brlt %r0, %r1, clear_bss
-
- /* Zero the one and only argument of "board_init_f" */
- mov_s %r0, 0
- j board_init_f
-
-memory_error:
- SAVE_ALL_SYS
- SAVE_EXCEPTION_SOURCE
- mov %r1, %sp
- j do_memory_error
-
-instruction_error:
- SAVE_ALL_SYS
- SAVE_EXCEPTION_SOURCE
- mov %r1, %sp
- j do_instruction_error
-
-interrupt_handler:
- /* Todo - save and restore CPU context when interrupts will be in use */
- bl do_interrupt_handler
- rtie
-
-EV_MachineCheck:
- SAVE_ALL_SYS
- SAVE_EXCEPTION_SOURCE
- mov %r1, %sp
- j do_machine_check_fault
-
-EV_TLBMissI:
- SAVE_ALL_SYS
- mov %r0, %sp
- j do_itlb_miss
-
-EV_TLBMissD:
- SAVE_ALL_SYS
- mov %r0, %sp
- j do_dtlb_miss
-
-EV_TLBProtV:
- SAVE_ALL_SYS
- SAVE_EXCEPTION_SOURCE
- mov %r1, %sp
- j do_tlb_prot_violation
-
-EV_PrivilegeV:
- SAVE_ALL_SYS
- mov %r0, %sp
- j do_privilege_violation
-
-EV_Trap:
- SAVE_ALL_SYS
- mov %r0, %sp
- j do_trap
-
-EV_Extension:
- SAVE_ALL_SYS
- mov %r0, %sp
- j do_extension
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r0 = start_addr_sp
- * r1 = new__gd
- * r2 = relocaddr
- */
-.align 4
-.globl relocate_code
-relocate_code:
- /*
- * r0-r12 might be clobbered by C functions
- * so we use r13-r16 for storage here
- */
- mov %r13, %r0 /* save addr_sp */
- mov %r14, %r1 /* save addr of gd */
- mov %r15, %r2 /* save addr of destination */
-
- mov %r16, %r2 /* %r9 - relocation offset */
- sub %r16, %r16, __image_copy_start
-
-/* Set up the stack */
-stack_setup:
- mov %sp, %r13
- mov %fp, %sp
-
-/* Check if monitor is loaded right in place for relocation */
- mov %r0, __image_copy_start
- cmp %r0, %r15 /* skip relocation if code loaded */
- bz do_board_init_r /* in target location already */
-
-/* Copy data (__image_copy_start - __image_copy_end) to new location */
- mov %r1, %r15
- mov %r2, __image_copy_end
- sub %r2, %r2, %r0 /* r3 <- amount of bytes to copy */
- asr %r2, %r2, 2 /* r3 <- amount of words to copy */
- mov %lp_count, %r2
- lp copy_end
- ld.ab %r2,[%r0,4]
- st.ab %r2,[%r1,4]
-copy_end:
-
-/* Fix relocations related issues */
- bl do_elf_reloc_fixups
-#ifndef CONFIG_SYS_ICACHE_OFF
- bl invalidate_icache_all
-#endif
-#ifndef CONFIG_SYS_DCACHE_OFF
- bl flush_dcache_all
-#endif
-
-/* Update position of intterupt vector table */
- lr %r0, [ARC_AUX_INTR_VEC_BASE] /* Read current position */
- add %r0, %r0, %r16 /* Update address */
- sr %r0, [ARC_AUX_INTR_VEC_BASE] /* Write new position */
-
-do_board_init_r:
-/* Prepare for exection of "board_init_r" in relocated monitor */
- mov %r2, board_init_r /* old address of "board_init_r()" */
- add %r2, %r2, %r16 /* new address of "board_init_r()" */
- mov %r0, %r14 /* 1-st parameter: gd_t */
- mov %r1, %r15 /* 2-nd parameter: dest_addr */
- j [%r2]
--- /dev/null
+#
+# Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += start.o
--- /dev/null
+#
+# Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+PLATFORM_CPPFLAGS += -mA7
--- /dev/null
+/*
+ * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <asm/arcregs.h>
+
+/*
+ * Note on the LD/ST addressing modes with address register write-back
+ *
+ * LD.a same as LD.aw
+ *
+ * LD.a reg1, [reg2, x] => Pre Incr
+ * Eff Addr for load = [reg2 + x]
+ *
+ * LD.ab reg1, [reg2, x] => Post Incr
+ * Eff Addr for load = [reg2]
+ */
+
+.macro PUSH reg
+ st.a \reg, [%sp, -4]
+.endm
+
+.macro PUSHAX aux
+ lr %r9, [\aux]
+ PUSH %r9
+.endm
+
+.macro SAVE_R1_TO_R24
+ PUSH %r1
+ PUSH %r2
+ PUSH %r3
+ PUSH %r4
+ PUSH %r5
+ PUSH %r6
+ PUSH %r7
+ PUSH %r8
+ PUSH %r9
+ PUSH %r10
+ PUSH %r11
+ PUSH %r12
+ PUSH %r13
+ PUSH %r14
+ PUSH %r15
+ PUSH %r16
+ PUSH %r17
+ PUSH %r18
+ PUSH %r19
+ PUSH %r20
+ PUSH %r21
+ PUSH %r22
+ PUSH %r23
+ PUSH %r24
+.endm
+
+.macro SAVE_ALL_SYS
+ /* saving %r0 to reg->r0 in advance since we read %ecr into it */
+ st %r0, [%sp, -8]
+ lr %r0, [%ecr] /* all stack addressing is manual so far */
+ st %r0, [%sp]
+ st %sp, [%sp, -4]
+ /* now move %sp to reg->r0 position so we can do "push" automatically */
+ sub %sp, %sp, 8
+
+ SAVE_R1_TO_R24
+ PUSH %r25
+ PUSH %gp
+ PUSH %fp
+ PUSH %blink
+ PUSHAX %eret
+ PUSHAX %erstatus
+ PUSH %lp_count
+ PUSHAX %lp_end
+ PUSHAX %lp_start
+ PUSHAX %erbta
+.endm
+
+.macro SAVE_EXCEPTION_SOURCE
+#ifdef CONFIG_MMU
+ /* If MMU exists exception faulting address is loaded in EFA reg */
+ lr %r0, [%efa]
+#else
+ /* Otherwise in ERET (exception return) reg */
+ lr %r0, [%eret]
+#endif
+.endm
+
+.section .ivt, "ax",@progbits
+.align 4
+_ivt:
+ /* Critical system events */
+ j _start /* 0 - 0x000 */
+ j memory_error /* 1 - 0x008 */
+ j instruction_error /* 2 - 0x010 */
+
+ /* Device interrupts */
+.rept 29
+ j interrupt_handler /* 3:31 - 0x018:0xF8 */
+.endr
+ /* Exceptions */
+ j EV_MachineCheck /* 0x100, Fatal Machine check (0x20) */
+ j EV_TLBMissI /* 0x108, Intruction TLB miss (0x21) */
+ j EV_TLBMissD /* 0x110, Data TLB miss (0x22) */
+ j EV_TLBProtV /* 0x118, Protection Violation (0x23)
+ or Misaligned Access */
+ j EV_PrivilegeV /* 0x120, Privilege Violation (0x24) */
+ j EV_Trap /* 0x128, Trap exception (0x25) */
+ j EV_Extension /* 0x130, Extn Intruction Excp (0x26) */
+
+.text
+.globl _start
+_start:
+ /* Setup interrupt vector base that matches "__text_start" */
+ sr __ivt_start, [ARC_AUX_INTR_VEC_BASE]
+
+ /* Setup stack pointer */
+ mov %sp, CONFIG_SYS_INIT_SP_ADDR
+ mov %fp, %sp
+
+ /* Clear bss */
+ mov %r0, __bss_start
+ mov %r1, __bss_end
+
+clear_bss:
+ st.ab 0, [%r0, 4]
+ brlt %r0, %r1, clear_bss
+
+ /* Zero the one and only argument of "board_init_f" */
+ mov_s %r0, 0
+ j board_init_f
+
+memory_error:
+ SAVE_ALL_SYS
+ SAVE_EXCEPTION_SOURCE
+ mov %r1, %sp
+ j do_memory_error
+
+instruction_error:
+ SAVE_ALL_SYS
+ SAVE_EXCEPTION_SOURCE
+ mov %r1, %sp
+ j do_instruction_error
+
+interrupt_handler:
+ /* Todo - save and restore CPU context when interrupts will be in use */
+ bl do_interrupt_handler
+ rtie
+
+EV_MachineCheck:
+ SAVE_ALL_SYS
+ SAVE_EXCEPTION_SOURCE
+ mov %r1, %sp
+ j do_machine_check_fault
+
+EV_TLBMissI:
+ SAVE_ALL_SYS
+ mov %r0, %sp
+ j do_itlb_miss
+
+EV_TLBMissD:
+ SAVE_ALL_SYS
+ mov %r0, %sp
+ j do_dtlb_miss
+
+EV_TLBProtV:
+ SAVE_ALL_SYS
+ SAVE_EXCEPTION_SOURCE
+ mov %r1, %sp
+ j do_tlb_prot_violation
+
+EV_PrivilegeV:
+ SAVE_ALL_SYS
+ mov %r0, %sp
+ j do_privilege_violation
+
+EV_Trap:
+ SAVE_ALL_SYS
+ mov %r0, %sp
+ j do_trap
+
+EV_Extension:
+ SAVE_ALL_SYS
+ mov %r0, %sp
+ j do_extension
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * r0 = start_addr_sp
+ * r1 = new__gd
+ * r2 = relocaddr
+ */
+.align 4
+.globl relocate_code
+relocate_code:
+ /*
+ * r0-r12 might be clobbered by C functions
+ * so we use r13-r16 for storage here
+ */
+ mov %r13, %r0 /* save addr_sp */
+ mov %r14, %r1 /* save addr of gd */
+ mov %r15, %r2 /* save addr of destination */
+
+ mov %r16, %r2 /* %r9 - relocation offset */
+ sub %r16, %r16, __image_copy_start
+
+/* Set up the stack */
+stack_setup:
+ mov %sp, %r13
+ mov %fp, %sp
+
+/* Check if monitor is loaded right in place for relocation */
+ mov %r0, __image_copy_start
+ cmp %r0, %r15 /* skip relocation if code loaded */
+ bz do_board_init_r /* in target location already */
+
+/* Copy data (__image_copy_start - __image_copy_end) to new location */
+ mov %r1, %r15
+ mov %r2, __image_copy_end
+ sub %r2, %r2, %r0 /* r3 <- amount of bytes to copy */
+ asr %r2, %r2, 2 /* r3 <- amount of words to copy */
+ mov %lp_count, %r2
+ lp copy_end
+ ld.ab %r2,[%r0,4]
+ st.ab %r2,[%r1,4]
+copy_end:
+
+/* Fix relocations related issues */
+ bl do_elf_reloc_fixups
+#ifndef CONFIG_SYS_ICACHE_OFF
+ bl invalidate_icache_all
+#endif
+#ifndef CONFIG_SYS_DCACHE_OFF
+ bl flush_dcache_all
+#endif
+
+/* Update position of intterupt vector table */
+ lr %r0, [ARC_AUX_INTR_VEC_BASE] /* Read current position */
+ add %r0, %r0, %r16 /* Update address */
+ sr %r0, [ARC_AUX_INTR_VEC_BASE] /* Write new position */
+
+do_board_init_r:
+/* Prepare for exection of "board_init_r" in relocated monitor */
+ mov %r2, board_init_r /* old address of "board_init_r()" */
+ add %r2, %r2, %r16 /* new address of "board_init_r()" */
+ mov %r0, %r14 /* 1-st parameter: gd_t */
+ mov %r1, %r15 /* 2-nd parameter: dest_addr */
+ j [%r2]
projects / oweals / u-boot.git / commitdiff