sunxi: A64/Pine64: update device tree from Linux

The Linux device tree for the Allwinner A64 SoC has changed a lot since
the U-Boot version was merged.
Let's replace the current DT with a exact copy of the Linux one as of:
commit c6778ff813d2ca3e3c8733c87dc8b6831a64578b
Merge: 0ff4c01 3c0e3abd
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date:   Tue May 9 10:07:33 2017 -0700

This is the DT used in Linux 4.12-rc1.

Since U-Boot has an Ethernet driver (while Linux does not yet), we
provide the required DT nodes for it in an ...-u-boot.dtsi file, to both
mark them as U-Boot specific and to allow easier upgrading once Linux gets
the driver and its own binding later.
Compared to the existing Ethernet DT nodes we just slightly tweak the clock
and reset nodes in there to match the new bindings used by Linux for those.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>

diff --git a/arch/arm/dts/sun50i-a64-pine64-common.dtsi b/arch/arm/dts/sun50i-a64-pine64-common.dtsi
deleted file mode 100644 (file)
index 9ec81c6..0000000
--- a/arch/arm/dts/sun50i-a64-pine64-common.dtsi
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * Copyright (c) 2016 ARM Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "sun50i-a64.dtsi"
-
-/ {
-
-       aliases {
-               serial0 = &uart0;
-               ethernet0 = &emac;
-       };
-
-       soc {
-               reg_vcc3v3: vcc3v3 {
-                       compatible = "regulator-fixed";
-                       regulator-name = "vcc3v3";
-                       regulator-min-microvolt = <3300000>;
-                       regulator-max-microvolt = <3300000>;
-               };
-       };
-};
-
-&mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins>, <&mmc0_default_cd_pin>;
-       vmmc-supply = <&reg_vcc3v3>;
-       cd-gpios = <&pio 5 6 0>;
-       cd-inverted;
-       status = "okay";
-};
-
-&uart0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
-       status = "okay";
-};
-
-&i2c1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c1_pins>;
-       status = "okay";
-};
-
-&usbphy {
-       status = "okay";
-};
-
-&ohci1 {
-       status = "okay";
-};
-
-&ehci1 {
-       status = "okay";
-};

diff --git a/arch/arm/dts/sun50i-a64-pine64-plus-u-boot.dtsi b/arch/arm/dts/sun50i-a64-pine64-plus-u-boot.dtsi
new file mode 100644 (file)
index 0000000..9c61bea
--- /dev/null
+++ b/arch/arm/dts/sun50i-a64-pine64-plus-u-boot.dtsi
@@ -0,0 +1,50 @@
+/ {
+       aliases {
+               ethernet0 = &emac;
+       };
+
+       soc {
+               emac: ethernet@01c30000 {
+                       compatible = "allwinner,sun50i-a64-emac";
+                       reg = <0x01c30000 0x2000>, <0x01c00030 0x4>;
+                       reg-names = "emac", "syscon";
+                       interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+                       resets = <&ccu RST_BUS_EMAC>;
+                       reset-names = "ahb";
+                       clocks = <&ccu CLK_BUS_EMAC>;
+                       clock-names = "ahb";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&rgmii_pins>;
+                       phy-mode = "rgmii";
+                       phy = <&phy1>;
+                       status = "okay";
+
+                       phy1: ethernet-phy@1 {
+                               reg = <1>;
+                       };
+               };
+       };
+};
+
+&pio {
+       rmii_pins: rmii_pins {
+               allwinner,pins = "PD10", "PD11", "PD13", "PD14",
+                                "PD17", "PD18", "PD19", "PD20",
+                                "PD22", "PD23";
+               allwinner,function = "emac";
+               allwinner,drive = <3>;
+               allwinner,pull = <0>;
+       };
+
+       rgmii_pins: rgmii_pins {
+               allwinner,pins = "PD8", "PD9", "PD10", "PD11",
+                                "PD12", "PD13", "PD15",
+                                "PD16", "PD17", "PD18", "PD19",
+                                "PD20", "PD21", "PD22", "PD23";
+               allwinner,function = "emac";
+               allwinner,drive = <3>;
+               allwinner,pull = <0>;
+       };
+};

diff --git a/arch/arm/dts/sun50i-a64-pine64-plus.dts b/arch/arm/dts/sun50i-a64-pine64-plus.dts
index 389c6096ca149734af69b9d9549b72073841d475..790d14daaa6a68f2b6ebe40594c5e78baea3f52a 100644 (file)
--- a/arch/arm/dts/sun50i-a64-pine64-plus.dts
+++ b/arch/arm/dts/sun50i-a64-pine64-plus.dts
@@ -40,33 +40,11 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-/dts-v1/;
-
-#include "sun50i-a64-pine64-common.dtsi"
+#include "sun50i-a64-pine64.dts"
 
 / {
        model = "Pine64+";
        compatible = "pine64,pine64-plus", "allwinner,sun50i-a64";
 
-       chosen {
-               stdout-path = "serial0:115200n8";
-       };
-
-       /* There is a model with 2GB of DRAM, but U-Boot fixes this for us. */
-       memory {
-               reg = <0x40000000 0x40000000>;
-       };
-};
-
-&emac {
-       pinctrl-names = "default";
-       pinctrl-0 = <&rgmii_pins>;
-       phy-mode = "rgmii";
-       phy = <&phy1>;
-       status = "okay";
-
-       phy1: ethernet-phy@1 {
-       reg = <1>;
-       };
+       /* TODO: Camera, Ethernet PHY, touchscreen, etc. */
 };
-

diff --git a/arch/arm/dts/sun50i-a64-pine64.dts b/arch/arm/dts/sun50i-a64-pine64.dts
index ebe029e8a8d77cbe91cb9d714a416d65cb3599ee..c680ed385da3565da0291e325b5429fcb1e3eeec 100644 (file)
--- a/arch/arm/dts/sun50i-a64-pine64.dts
+++ b/arch/arm/dts/sun50i-a64-pine64.dts
@@ -42,17 +42,70 @@
 
 /dts-v1/;
 
-#include "sun50i-a64-pine64-common.dtsi"
+#include "sun50i-a64.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
 
 / {
        model = "Pine64";
        compatible = "pine64,pine64", "allwinner,sun50i-a64";
 
+       aliases {
+               serial0 = &uart0;
+       };
+
        chosen {
                stdout-path = "serial0:115200n8";
        };
 
-       memory {
-               reg = <0x40000000 0x20000000>;
+       reg_vcc3v3: vcc3v3 {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc3v3";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
        };
 };
+
+&ehci1 {
+       status = "okay";
+};
+
+&i2c1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c1_pins>;
+       status = "okay";
+};
+
+&i2c1_pins {
+       bias-pull-up;
+};
+
+&mmc0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc0_pins>;
+       vmmc-supply = <&reg_vcc3v3>;
+       cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+       cd-inverted;
+       disable-wp;
+       bus-width = <4>;
+       status = "okay";
+};
+
+&ohci1 {
+       status = "okay";
+};
+
+&uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_pins_a>;
+       status = "okay";
+};
+
+&usb_otg {
+       dr_mode = "host";
+       status = "okay";
+};
+
+&usbphy {
+       status = "okay";
+};

diff --git a/arch/arm/dts/sun50i-a64.dtsi b/arch/arm/dts/sun50i-a64.dtsi
index bef0d00be8b23e9a4118f4b87d28e81c36d408f5..c7f669f5884f910c6e4be44ac1dd09a216cb97f0 100644 (file)
--- a/arch/arm/dts/sun50i-a64.dtsi
+++ b/arch/arm/dts/sun50i-a64.dtsi
@@ -42,8 +42,9 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
+#include <dt-bindings/clock/sun50i-a64-ccu.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/reset/sun50i-a64-ccu.h>
 
 / {
        interrupt-parent = <&gic>;
@@ -54,28 +55,28 @@
                #address-cells = <1>;
                #size-cells = <0>;
 
-               cpu@0 {
+               cpu0: cpu@0 {
                        compatible = "arm,cortex-a53", "arm,armv8";
                        device_type = "cpu";
                        reg = <0>;
                        enable-method = "psci";
                };
 
-               cpu@1 {
+               cpu1: cpu@1 {
                        compatible = "arm,cortex-a53", "arm,armv8";
                        device_type = "cpu";
                        reg = <1>;
                        enable-method = "psci";
                };
 
-               cpu@2 {
+               cpu2: cpu@2 {
                        compatible = "arm,cortex-a53", "arm,armv8";
                        device_type = "cpu";
                        reg = <2>;
                        enable-method = "psci";
                };
 
-               cpu@3 {
+               cpu3: cpu@3 {
                        compatible = "arm,cortex-a53", "arm,armv8";
                        device_type = "cpu";
                        reg = <3>;
@@ -83,28 +84,31 @@
                };
        };
 
-       psci {
-               compatible = "arm,psci-0.2";
-               method = "smc";
+       osc24M: osc24M_clk {
+               #clock-cells = <0>;
+               compatible = "fixed-clock";
+               clock-frequency = <24000000>;
+               clock-output-names = "osc24M";
+       };
+
+       osc32k: osc32k_clk {
+               #clock-cells = <0>;
+               compatible = "fixed-clock";
+               clock-frequency = <32768>;
+               clock-output-names = "osc32k";
        };
 
-       memory {
-               device_type = "memory";
-               reg = <0x40000000 0>;
+       iosc: internal-osc-clk {
+               #clock-cells = <0>;
+               compatible = "fixed-clock";
+               clock-frequency = <16000000>;
+               clock-accuracy = <300000000>;
+               clock-output-names = "iosc";
        };
 
-       gic: interrupt-controller@1c81000 {
-               compatible = "arm,gic-400";
-               interrupt-controller;
-               #interrupt-cells = <3>;
-               #address-cells = <0>;
-
-               reg = <0x01c81000 0x1000>,
-                     <0x01c82000 0x2000>,
-                     <0x01c84000 0x2000>,
-                     <0x01c86000 0x2000>;
-               interrupts = <GIC_PPI 9
-                     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+       psci {
+               compatible = "arm,psci-0.2";
+               method = "smc";
        };
 
        timer {
@@ -119,199 +123,6 @@
                        (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
        };
 
-       clocks {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               ranges;
-
-               osc24M: osc24M_clk {
-                       #clock-cells = <0>;
-                       compatible = "fixed-clock";
-                       clock-frequency = <24000000>;
-                       clock-output-names = "osc24M";
-               };
-
-               osc32k: osc32k_clk {
-                       #clock-cells = <0>;
-                       compatible = "fixed-clock";
-                       clock-frequency = <32768>;
-                       clock-output-names = "osc32k";
-               };
-
-               pll1: pll1_clk@1c20000 {
-                       #clock-cells = <0>;
-                       compatible = "allwinner,sun8i-a23-pll1-clk";
-                       reg = <0x01c20000 0x4>;
-                       clocks = <&osc24M>;
-                       clock-output-names = "pll1";
-               };
-
-               pll6: pll6_clk@1c20028 {
-                       #clock-cells = <1>;
-                       compatible = "allwinner,sun6i-a31-pll6-clk";
-                       reg = <0x01c20028 0x4>;
-                       clocks = <&osc24M>;
-                       clock-output-names = "pll6", "pll6x2";
-               };
-
-               pll6d2: pll6d2_clk {
-                       #clock-cells = <0>;
-                       compatible = "fixed-factor-clock";
-                       clock-div = <2>;
-                       clock-mult = <1>;
-                       clocks = <&pll6 0>;
-                       clock-output-names = "pll6d2";
-               };
-
-               pll7: pll7_clk@1c2002c {
-                       #clock-cells = <1>;
-                       compatible = "allwinner,sun6i-a31-pll6-clk";
-                       reg = <0x01c2002c 0x4>;
-                       clocks = <&osc24M>;
-                       clock-output-names = "pll7", "pll7x2";
-               };
-
-               cpu: cpu_clk@1c20050 {
-                       #clock-cells = <0>;
-                       compatible = "allwinner,sun4i-a10-cpu-clk";
-                       reg = <0x01c20050 0x4>;
-                       clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
-                       clock-output-names = "cpu";
-                       critical-clocks = <0>;
-               };
-
-               axi: axi_clk@1c20050 {
-                       #clock-cells = <0>;
-                       compatible = "allwinner,sun4i-a10-axi-clk";
-                       reg = <0x01c20050 0x4>;
-                       clocks = <&cpu>;
-                       clock-output-names = "axi";
-               };
-
-               ahb1: ahb1_clk@1c20054 {
-                       #clock-cells = <0>;
-                       compatible = "allwinner,sun6i-a31-ahb1-clk";
-                       reg = <0x01c20054 0x4>;
-                       clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
-                       clock-output-names = "ahb1";
-               };
-
-               ahb2: ahb2_clk@1c2005c {
-                       #clock-cells = <0>;
-                       compatible = "allwinner,sun8i-h3-ahb2-clk";
-                       reg = <0x01c2005c 0x4>;
-                       clocks = <&ahb1>, <&pll6d2>;
-                       clock-output-names = "ahb2";
-               };
-
-               apb1: apb1_clk@1c20054 {
-                       #clock-cells = <0>;
-                       compatible = "allwinner,sun4i-a10-apb0-clk";
-                       reg = <0x01c20054 0x4>;
-                       clocks = <&ahb1>;
-                       clock-output-names = "apb1";
-               };
-
-               apb2: apb2_clk@1c20058 {
-                       #clock-cells = <0>;
-                       compatible = "allwinner,sun4i-a10-apb1-clk";
-                       reg = <0x01c20058 0x4>;
-                       clocks = <&osc32k>, <&osc24M>, <&pll6 1>, <&pll6 1>;
-                       clock-output-names = "apb2";
-               };
-
-               bus_gates: bus_gates_clk@1c20060 {
-                       #clock-cells = <1>;
-                       compatible = "allwinner,sun50i-a64-bus-gates-clk",
-                                    "allwinner,sunxi-multi-bus-gates-clk";
-                       reg = <0x01c20060 0x14>;
-                       ahb1_parent {
-                               clocks = <&ahb1>;
-                               clock-indices = <1>, <5>,
-                                               <6>, <8>,
-                                               <9>, <10>,
-                                               <13>, <14>,
-                                               <18>, <19>,
-                                               <20>, <21>,
-                                               <23>, <24>,
-                                               <25>, <28>,
-                                               <32>, <35>,
-                                               <36>, <37>,
-                                               <40>, <43>,
-                                               <44>, <52>,
-                                               <53>, <54>,
-                                               <135>;
-                               clock-output-names = "bus_mipidsi", "bus_ce",
-                                               "bus_dma", "bus_mmc0",
-                                               "bus_mmc1", "bus_mmc2",
-                                               "bus_nand", "bus_sdram",
-                                               "bus_ts", "bus_hstimer",
-                                               "bus_spi0", "bus_spi1",
-                                               "bus_otg", "bus_otg_ehci0",
-                                               "bus_ehci0", "bus_otg_ohci0",
-                                               "bus_ve", "bus_lcd0",
-                                               "bus_lcd1", "bus_deint",
-                                               "bus_csi", "bus_hdmi",
-                                               "bus_de", "bus_gpu",
-                                               "bus_msgbox", "bus_spinlock",
-                                               "bus_dbg";
-                       };
-                       ahb2_parent {
-                               clocks = <&ahb2>;
-                               clock-indices = <17>, <29>;
-                               clock-output-names = "bus_gmac", "bus_ohci0";
-                       };
-                       apb1_parent {
-                               clocks = <&apb1>;
-                               clock-indices = <64>, <65>,
-                                               <69>, <72>,
-                                               <76>, <77>,
-                                               <78>;
-                               clock-output-names = "bus_codec", "bus_spdif",
-                                               "bus_pio", "bus_ths",
-                                               "bus_i2s0", "bus_i2s1",
-                                               "bus_i2s2";
-                       };
-                       abp2_parent {
-                               clocks = <&apb2>;
-                               clock-indices = <96>, <97>,
-                                               <98>, <101>,
-                                               <112>, <113>,
-                                               <114>, <115>,
-                                               <116>;
-                               clock-output-names = "bus_i2c0", "bus_i2c1",
-                                               "bus_i2c2", "bus_scr",
-                                               "bus_uart0", "bus_uart1",
-                                               "bus_uart2", "bus_uart3",
-                                               "bus_uart4";
-                       };
-               };
-
-               mmc0_clk: mmc0_clk@1c20088 {
-                       #clock-cells = <0>;
-                       compatible = "allwinner,sun4i-a10-mod0-clk";
-                       reg = <0x01c20088 0x4>;
-                       clocks = <&osc24M>, <&pll6 1>, <&pll7 1>;
-                       clock-output-names = "mmc0";
-                };
-
-               mmc1_clk: mmc1_clk@1c2008c {
-                       #clock-cells = <0>;
-                       compatible = "allwinner,sun4i-a10-mod0-clk";
-                       reg = <0x01c2008c 0x4>;
-                       clocks = <&osc24M>, <&pll6 1>, <&pll7 1>;
-                       clock-output-names = "mmc1";
-               };
-
-               mmc2_clk: mmc2_clk@1c20090 {
-                       #clock-cells = <0>;
-                       compatible = "allwinner,sun4i-a10-mod0-clk";
-                       reg = <0x01c20090 0x4>;
-                       clocks = <&osc24M>, <&pll6 1>, <&pll7 1>;
-                       clock-output-names = "mmc2";
-               };
-       };
-
        soc {
                compatible = "simple-bus";
                #address-cells = <1>;
@@ -319,240 +130,181 @@
                ranges;
 
                mmc0: mmc@1c0f000 {
-                       compatible = "allwinner,sun50i-a64-mmc",
-                                    "allwinner,sun5i-a13-mmc";
+                       compatible = "allwinner,sun50i-a64-mmc";
                        reg = <0x01c0f000 0x1000>;
-                       clocks = <&bus_gates 8>, <&mmc0_clk>,
-                                <&mmc0_clk>, <&mmc0_clk>;
-                       clock-names = "ahb", "mmc",
-                                     "output", "sample";
-                       resets = <&ahb_rst 8>;
+                       clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+                       clock-names = "ahb", "mmc";
+                       resets = <&ccu RST_BUS_MMC0>;
                        reset-names = "ahb";
                        interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+                       max-frequency = <150000000>;
                        status = "disabled";
                        #address-cells = <1>;
                        #size-cells = <0>;
                };
 
                mmc1: mmc@1c10000 {
-                       compatible = "allwinner,sun50i-a64-mmc",
-                                    "allwinner,sun5i-a13-mmc";
+                       compatible = "allwinner,sun50i-a64-mmc";
                        reg = <0x01c10000 0x1000>;
-                       clocks = <&bus_gates 9>, <&mmc1_clk>,
-                                <&mmc1_clk>, <&mmc1_clk>;
-                       clock-names = "ahb", "mmc",
-                                     "output", "sample";
-                       resets = <&ahb_rst 9>;
+                       clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+                       clock-names = "ahb", "mmc";
+                       resets = <&ccu RST_BUS_MMC1>;
                        reset-names = "ahb";
                        interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+                       max-frequency = <150000000>;
                        status = "disabled";
                        #address-cells = <1>;
                        #size-cells = <0>;
                };
 
                mmc2: mmc@1c11000 {
-                       compatible = "allwinner,sun50i-a64-mmc",
-                                    "allwinner,sun5i-a13-mmc";
+                       compatible = "allwinner,sun50i-a64-emmc";
                        reg = <0x01c11000 0x1000>;
-                       clocks = <&bus_gates 10>, <&mmc2_clk>,
-                                <&mmc2_clk>, <&mmc2_clk>;
-                       clock-names = "ahb", "mmc",
-                                     "output", "sample";
-                       resets = <&ahb_rst 10>;
+                       clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+                       clock-names = "ahb", "mmc";
+                       resets = <&ccu RST_BUS_MMC2>;
                        reset-names = "ahb";
                        interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+                       max-frequency = <200000000>;
                        status = "disabled";
                        #address-cells = <1>;
                        #size-cells = <0>;
                };
 
+               usb_otg: usb@01c19000 {
+                       compatible = "allwinner,sun8i-a33-musb";
+                       reg = <0x01c19000 0x0400>;
+                       clocks = <&ccu CLK_BUS_OTG>;
+                       resets = <&ccu RST_BUS_OTG>;
+                       interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "mc";
+                       phys = <&usbphy 0>;
+                       phy-names = "usb";
+                       extcon = <&usbphy 0>;
+                       status = "disabled";
+               };
+
+               usbphy: phy@01c19400 {
+                       compatible = "allwinner,sun50i-a64-usb-phy";
+                       reg = <0x01c19400 0x14>,
+                             <0x01c1a800 0x4>,
+                             <0x01c1b800 0x4>;
+                       reg-names = "phy_ctrl",
+                                   "pmu0",
+                                   "pmu1";
+                       clocks = <&ccu CLK_USB_PHY0>,
+                                <&ccu CLK_USB_PHY1>;
+                       clock-names = "usb0_phy",
+                                     "usb1_phy";
+                       resets = <&ccu RST_USB_PHY0>,
+                                <&ccu RST_USB_PHY1>;
+                       reset-names = "usb0_reset",
+                                     "usb1_reset";
+                       status = "disabled";
+                       #phy-cells = <1>;
+               };
+
+               ehci1: usb@01c1b000 {
+                       compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
+                       reg = <0x01c1b000 0x100>;
+                       interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_OHCI1>,
+                                <&ccu CLK_BUS_EHCI1>,
+                                <&ccu CLK_USB_OHCI1>;
+                       resets = <&ccu RST_BUS_OHCI1>,
+                                <&ccu RST_BUS_EHCI1>;
+                       phys = <&usbphy 1>;
+                       phy-names = "usb";
+                       status = "disabled";
+               };
+
+               ohci1: usb@01c1b400 {
+                       compatible = "allwinner,sun50i-a64-ohci", "generic-ohci";
+                       reg = <0x01c1b400 0x100>;
+                       interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_OHCI1>,
+                                <&ccu CLK_USB_OHCI1>;
+                       resets = <&ccu RST_BUS_OHCI1>;
+                       phys = <&usbphy 1>;
+                       phy-names = "usb";
+                       status = "disabled";
+               };
+
+               ccu: clock@01c20000 {
+                       compatible = "allwinner,sun50i-a64-ccu";
+                       reg = <0x01c20000 0x400>;
+                       clocks = <&osc24M>, <&osc32k>;
+                       clock-names = "hosc", "losc";
+                       #clock-cells = <1>;
+                       #reset-cells = <1>;
+               };
+
                pio: pinctrl@1c20800 {
                        compatible = "allwinner,sun50i-a64-pinctrl";
                        reg = <0x01c20800 0x400>;
                        interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
                                     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
                                     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&bus_gates 69>;
+                       clocks = <&ccu 58>;
                        gpio-controller;
                        #gpio-cells = <3>;
                        interrupt-controller;
-                       #interrupt-cells = <2>;
-
-                       uart0_pins_a: uart0@0 {
-                               allwinner,pins = "PB8", "PB9";
-                               allwinner,function = "uart0";
-                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-                       };
-
-                       uart0_pins_b: uart0@1 {
-                               allwinner,pins = "PF2", "PF3";
-                               allwinner,function = "uart0";
-                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-                       };
-
-                       uart1_2pins: uart1_2@0 {
-                               allwinner,pins = "PG6", "PG7";
-                               allwinner,function = "uart1";
-                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-                       };
-
-                       uart1_4pins: uart1_4@0 {
-                               allwinner,pins = "PG6", "PG7", "PG8", "PG9";
-                               allwinner,function = "uart1";
-                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-                       };
-
-                       uart2_2pins: uart2_2@0 {
-                               allwinner,pins = "PB0", "PB1";
-                               allwinner,function = "uart2";
-                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-                       };
-
-                       uart2_4pins: uart2_4@0 {
-                               allwinner,pins = "PB0", "PB1", "PB2", "PB3";
-                               allwinner,function = "uart2";
-                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-                       };
-
-                       uart3_pins_a: uart3@0 {
-                               allwinner,pins = "PD0", "PD1";
-                               allwinner,function = "uart3";
-                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-                       };
-
-                       uart3_2pins_b: uart3_2@1 {
-                               allwinner,pins = "PH4", "PH5";
-                               allwinner,function = "uart3";
-                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-                       };
+                       #interrupt-cells = <3>;
 
-                       uart3_4pins_b: uart3_4@1 {
-                               allwinner,pins = "PH4", "PH5", "PH6", "PH7";
-                               allwinner,function = "uart3";
-                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-                       };
-
-                       uart4_2pins: uart4_2@0 {
-                               allwinner,pins = "PD2", "PD3";
-                               allwinner,function = "uart4";
-                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-                       };
-
-                       uart4_4pins: uart4_4@0 {
-                               allwinner,pins = "PD2", "PD3", "PD4", "PD5";
-                               allwinner,function = "uart4";
-                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-                       };
-
-                       mmc0_pins: mmc0@0 {
-                               allwinner,pins = "PF0", "PF1", "PF2", "PF3",
-                                                "PF4", "PF5";
-                               allwinner,function = "mmc0";
-                               allwinner,drive = <SUN4I_PINCTRL_30_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-                       };
-
-                       mmc0_default_cd_pin: mmc0_cd_pin@0 {
-                               allwinner,pins = "PF6";
-                               allwinner,function = "gpio_in";
-                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-                       };
-
-                       mmc1_pins: mmc1@0 {
-                               allwinner,pins = "PG0", "PG1", "PG2", "PG3",
-                                                "PG4", "PG5";
-                               allwinner,function = "mmc1";
-                               allwinner,drive = <SUN4I_PINCTRL_30_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       i2c1_pins: i2c1_pins {
+                               pins = "PH2", "PH3";
+                               function = "i2c1";
                        };
 
-                       mmc2_pins: mmc2@0 {
-                               allwinner,pins = "PC1", "PC5", "PC6", "PC8",
-                                                "PC9", "PC10";
-                               allwinner,function = "mmc2";
-                               allwinner,drive = <SUN4I_PINCTRL_30_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       mmc0_pins: mmc0-pins {
+                               pins = "PF0", "PF1", "PF2", "PF3",
+                                      "PF4", "PF5";
+                               function = "mmc0";
+                               drive-strength = <30>;
+                               bias-pull-up;
                        };
 
-                       i2c0_pins: i2c0_pins {
-                               allwinner,pins = "PH0", "PH1";
-                               allwinner,function = "i2c0";
-                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       mmc1_pins: mmc1-pins {
+                               pins = "PG0", "PG1", "PG2", "PG3",
+                                      "PG4", "PG5";
+                               function = "mmc1";
+                               drive-strength = <30>;
+                               bias-pull-up;
                        };
 
-                       i2c1_pins: i2c1_pins {
-                               allwinner,pins = "PH2", "PH3";
-                               allwinner,function = "i2c1";
-                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       mmc2_pins: mmc2-pins {
+                               pins = "PC1", "PC5", "PC6", "PC8", "PC9",
+                                      "PC10","PC11", "PC12", "PC13",
+                                      "PC14", "PC15", "PC16";
+                               function = "mmc2";
+                               drive-strength = <30>;
+                               bias-pull-up;
                        };
 
-                       i2c2_pins: i2c2_pins {
-                               allwinner,pins = "PE14", "PE15";
-                               allwinner,function = "i2c2";
-                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       uart0_pins_a: uart0@0 {
+                               pins = "PB8", "PB9";
+                               function = "uart0";
                        };
 
-                       rmii_pins: rmii_pins {
-                               allwinner,pins = "PD10", "PD11", "PD13", "PD14",
-                                                "PD17", "PD18", "PD19", "PD20",
-                                                "PD22", "PD23";
-                               allwinner,function = "emac";
-                               allwinner,drive = <SUN4I_PINCTRL_40_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       uart1_pins: uart1_pins {
+                               pins = "PG6", "PG7";
+                               function = "uart1";
                        };
 
-                       rgmii_pins: rgmii_pins {
-                               allwinner,pins = "PD8", "PD9", "PD10", "PD11",
-                                                "PD12", "PD13", "PD15",
-                                                "PD16", "PD17", "PD18", "PD19",
-                                                "PD20", "PD21", "PD22", "PD23";
-                               allwinner,function = "emac";
-                               allwinner,drive = <SUN4I_PINCTRL_40_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       uart1_rts_cts_pins: uart1_rts_cts_pins {
+                               pins = "PG8", "PG9";
+                               function = "uart1";
                        };
                };
 
-               ahb_rst: reset@1c202c0 {
-                       #reset-cells = <1>;
-                       compatible = "allwinner,sun6i-a31-clock-reset";
-                       reg = <0x01c202c0 0xc>;
-               };
-
-               apb1_rst: reset@1c202d0 {
-                       #reset-cells = <1>;
-                       compatible = "allwinner,sun6i-a31-clock-reset";
-                       reg = <0x01c202d0 0x4>;
-               };
-
-               apb2_rst: reset@1c202d8 {
-                       #reset-cells = <1>;
-                       compatible = "allwinner,sun6i-a31-clock-reset";
-                       reg = <0x01c202d8 0x4>;
-               };
-
                uart0: serial@1c28000 {
                        compatible = "snps,dw-apb-uart";
                        reg = <0x01c28000 0x400>;
                        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
                        reg-shift = <2>;
                        reg-io-width = <4>;
-                       clocks = <&bus_gates 112>;
-                       resets = <&apb2_rst 16>;
+                       clocks = <&ccu 67>;
+                       resets = <&ccu 46>;
                        status = "disabled";
                };
 
@@ -562,8 +314,8 @@
                        interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
                        reg-shift = <2>;
                        reg-io-width = <4>;
-                       clocks = <&bus_gates 113>;
-                       resets = <&apb2_rst 17>;
+                       clocks = <&ccu 68>;
+                       resets = <&ccu 47>;
                        status = "disabled";
                };
 
@@ -573,8 +325,8 @@
                        interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
                        reg-shift = <2>;
                        reg-io-width = <4>;
-                       clocks = <&bus_gates 114>;
-                       resets = <&apb2_rst 18>;
+                       clocks = <&ccu 69>;
+                       resets = <&ccu 48>;
                        status = "disabled";
                };
 
@@ -584,8 +336,8 @@
                        interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
                        reg-shift = <2>;
                        reg-io-width = <4>;
-                       clocks = <&bus_gates 115>;
-                       resets = <&apb2_rst 19>;
+                       clocks = <&ccu 70>;
+                       resets = <&ccu 49>;
                        status = "disabled";
                };
 
@@ -595,24 +347,17 @@
                        interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
                        reg-shift = <2>;
                        reg-io-width = <4>;
-                       clocks = <&bus_gates 116>;
-                       resets = <&apb2_rst 20>;
+                       clocks = <&ccu 71>;
+                       resets = <&ccu 50>;
                        status = "disabled";
                };
 
-               rtc: rtc@1f00000 {
-                       compatible = "allwinner,sun6i-a31-rtc";
-                       reg = <0x01f00000 0x54>;
-                       interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
-                                    <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-               };
-
                i2c0: i2c@1c2ac00 {
                        compatible = "allwinner,sun6i-a31-i2c";
                        reg = <0x01c2ac00 0x400>;
                        interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&bus_gates 96>;
-                       resets = <&apb2_rst 0>;
+                       clocks = <&ccu 63>;
+                       resets = <&ccu 42>;
                        status = "disabled";
                        #address-cells = <1>;
                        #size-cells = <0>;
@@ -622,8 +367,8 @@
                        compatible = "allwinner,sun6i-a31-i2c";
                        reg = <0x01c2b000 0x400>;
                        interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&bus_gates 97>;
-                       resets = <&apb2_rst 1>;
+                       clocks = <&ccu 64>;
+                       resets = <&ccu 43>;
                        status = "disabled";
                        #address-cells = <1>;
                        #size-cells = <0>;
@@ -633,54 +378,50 @@
                        compatible = "allwinner,sun6i-a31-i2c";
                        reg = <0x01c2b400 0x400>;
                        interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&bus_gates 98>;
-                       resets = <&apb2_rst 2>;
+                       clocks = <&ccu 65>;
+                       resets = <&ccu 44>;
                        status = "disabled";
                        #address-cells = <1>;
                        #size-cells = <0>;
                };
 
-               emac: ethernet@01c30000 {
-                       compatible = "allwinner,sun50i-a64-emac";
-                       reg = <0x01c30000 0x2000>, <0x01c00030 0x4>;
-                       reg-names = "emac", "syscon";
-                       interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-                       resets = <&ahb_rst 17>;
-                       reset-names = "ahb";
-                       clocks = <&bus_gates 17>;
-                       clock-names = "ahb";
-                       status = "disabled";
-                       #address-cells = <1>;
-                       #size-cells = <0>;
+               gic: interrupt-controller@1c81000 {
+                       compatible = "arm,gic-400";
+                       reg = <0x01c81000 0x1000>,
+                             <0x01c82000 0x2000>,
+                             <0x01c84000 0x2000>,
+                             <0x01c86000 0x2000>;
+                       interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+                       interrupt-controller;
+                       #interrupt-cells = <3>;
                };
 
-               usbphy: phy@1c1b810 {
-                       compatible = "allwinner,sun50i-a64-usb-phy",
-                                    "allwinner,sun8i-a33-usb-phy";
-                       reg = <0x01c1b810 0x14>, <0x01c1b800 0x4>;
-                       reg-names = "phy_ctrl", "pmu1";
-                       status = "disabled";
-                       #phy-cells = <1>;
+               rtc: rtc@1f00000 {
+                       compatible = "allwinner,sun6i-a31-rtc";
+                       reg = <0x01f00000 0x54>;
+                       interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
                };
 
-               ehci1: usb@01c1b000 {
-                       compatible = "allwinner,sun50i-a64-ehci",
-                                    "generic-ehci";
-                       reg = <0x01c1b000 0x100>;
-                       interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-                       phys = <&usbphy 1>;
-                       phy-names = "usb";
-                       status = "disabled";
+               r_ccu: clock@1f01400 {
+                       compatible = "allwinner,sun50i-a64-r-ccu";
+                       reg = <0x01f01400 0x100>;
+                       clocks = <&osc24M>, <&osc32k>, <&iosc>;
+                       clock-names = "hosc", "losc", "iosc";
+                       #clock-cells = <1>;
+                       #reset-cells = <1>;
                };
 
-               ohci1: usb@01c1b400 {
-                       compatible = "allwinner,sun50i-a64-ohci",
-                                    "generic-ohci";
-                       reg = <0x01c1b400 0x100>;
-                       interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-                       phys = <&usbphy 1>;
-                       phy-names = "usb";
-                       status = "enabled";
+               r_pio: pinctrl@01f02c00 {
+                       compatible = "allwinner,sun50i-a64-r-pinctrl";
+                       reg = <0x01f02c00 0x400>;
+                       interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&r_ccu 3>, <&osc24M>, <&osc32k>;
+                       clock-names = "apb", "hosc", "losc";
+                       gpio-controller;
+                       #gpio-cells = <3>;
+                       interrupt-controller;
+                       #interrupt-cells = <3>;
                };
        };
 };

diff --git a/include/dt-bindings/clock/sun50i-a64-ccu.h b/include/dt-bindings/clock/sun50i-a64-ccu.h
new file mode 100644 (file)
index 0000000..370c0a0
--- /dev/null
+++ b/include/dt-bindings/clock/sun50i-a64-ccu.h
@@ -0,0 +1,134 @@
+/*
+ * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN50I_A64_H_
+#define _DT_BINDINGS_CLK_SUN50I_A64_H_
+
+#define CLK_BUS_MIPI_DSI       28
+#define CLK_BUS_CE             29
+#define CLK_BUS_DMA            30
+#define CLK_BUS_MMC0           31
+#define CLK_BUS_MMC1           32
+#define CLK_BUS_MMC2           33
+#define CLK_BUS_NAND           34
+#define CLK_BUS_DRAM           35
+#define CLK_BUS_EMAC           36
+#define CLK_BUS_TS             37
+#define CLK_BUS_HSTIMER                38
+#define CLK_BUS_SPI0           39
+#define CLK_BUS_SPI1           40
+#define CLK_BUS_OTG            41
+#define CLK_BUS_EHCI0          42
+#define CLK_BUS_EHCI1          43
+#define CLK_BUS_OHCI0          44
+#define CLK_BUS_OHCI1          45
+#define CLK_BUS_VE             46
+#define CLK_BUS_TCON0          47
+#define CLK_BUS_TCON1          48
+#define CLK_BUS_DEINTERLACE    49
+#define CLK_BUS_CSI            50
+#define CLK_BUS_HDMI           51
+#define CLK_BUS_DE             52
+#define CLK_BUS_GPU            53
+#define CLK_BUS_MSGBOX         54
+#define CLK_BUS_SPINLOCK       55
+#define CLK_BUS_CODEC          56
+#define CLK_BUS_SPDIF          57
+#define CLK_BUS_PIO            58
+#define CLK_BUS_THS            59
+#define CLK_BUS_I2S0           60
+#define CLK_BUS_I2S1           61
+#define CLK_BUS_I2S2           62
+#define CLK_BUS_I2C0           63
+#define CLK_BUS_I2C1           64
+#define CLK_BUS_I2C2           65
+#define CLK_BUS_SCR            66
+#define CLK_BUS_UART0          67
+#define CLK_BUS_UART1          68
+#define CLK_BUS_UART2          69
+#define CLK_BUS_UART3          70
+#define CLK_BUS_UART4          71
+#define CLK_BUS_DBG            72
+#define CLK_THS                        73
+#define CLK_NAND               74
+#define CLK_MMC0               75
+#define CLK_MMC1               76
+#define CLK_MMC2               77
+#define CLK_TS                 78
+#define CLK_CE                 79
+#define CLK_SPI0               80
+#define CLK_SPI1               81
+#define CLK_I2S0               82
+#define CLK_I2S1               83
+#define CLK_I2S2               84
+#define CLK_SPDIF              85
+#define CLK_USB_PHY0           86
+#define CLK_USB_PHY1           87
+#define CLK_USB_HSIC           88
+#define CLK_USB_HSIC_12M       89
+
+#define CLK_USB_OHCI0          91
+
+#define CLK_USB_OHCI1          93
+
+#define CLK_DRAM_VE            95
+#define CLK_DRAM_CSI           96
+#define CLK_DRAM_DEINTERLACE   97
+#define CLK_DRAM_TS            98
+#define CLK_DE                 99
+#define CLK_TCON0              100
+#define CLK_TCON1              101
+#define CLK_DEINTERLACE                102
+#define CLK_CSI_MISC           103
+#define CLK_CSI_SCLK           104
+#define CLK_CSI_MCLK           105
+#define CLK_VE                 106
+#define CLK_AC_DIG             107
+#define CLK_AC_DIG_4X          108
+#define CLK_AVS                        109
+#define CLK_HDMI               110
+#define CLK_HDMI_DDC           111
+
+#define CLK_DSI_DPHY           113
+#define CLK_GPU                        114
+
+#endif /* _DT_BINDINGS_CLK_SUN50I_H_ */

diff --git a/include/dt-bindings/reset/sun50i-a64-ccu.h b/include/dt-bindings/reset/sun50i-a64-ccu.h
new file mode 100644 (file)
index 0000000..db60b29
--- /dev/null
+++ b/include/dt-bindings/reset/sun50i-a64-ccu.h
@@ -0,0 +1,98 @@
+/*
+ * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN50I_A64_H_
+#define _DT_BINDINGS_RST_SUN50I_A64_H_
+
+#define RST_USB_PHY0           0
+#define RST_USB_PHY1           1
+#define RST_USB_HSIC           2
+#define RST_DRAM               3
+#define RST_MBUS               4
+#define RST_BUS_MIPI_DSI       5
+#define RST_BUS_CE             6
+#define RST_BUS_DMA            7
+#define RST_BUS_MMC0           8
+#define RST_BUS_MMC1           9
+#define RST_BUS_MMC2           10
+#define RST_BUS_NAND           11
+#define RST_BUS_DRAM           12
+#define RST_BUS_EMAC           13
+#define RST_BUS_TS             14
+#define RST_BUS_HSTIMER                15
+#define RST_BUS_SPI0           16
+#define RST_BUS_SPI1           17
+#define RST_BUS_OTG            18
+#define RST_BUS_EHCI0          19
+#define RST_BUS_EHCI1          20
+#define RST_BUS_OHCI0          21
+#define RST_BUS_OHCI1          22
+#define RST_BUS_VE             23
+#define RST_BUS_TCON0          24
+#define RST_BUS_TCON1          25
+#define RST_BUS_DEINTERLACE    26
+#define RST_BUS_CSI            27
+#define RST_BUS_HDMI0          28
+#define RST_BUS_HDMI1          29
+#define RST_BUS_DE             30
+#define RST_BUS_GPU            31
+#define RST_BUS_MSGBOX         32
+#define RST_BUS_SPINLOCK       33
+#define RST_BUS_DBG            34
+#define RST_BUS_LVDS           35
+#define RST_BUS_CODEC          36
+#define RST_BUS_SPDIF          37
+#define RST_BUS_THS            38
+#define RST_BUS_I2S0           39
+#define RST_BUS_I2S1           40
+#define RST_BUS_I2S2           41
+#define RST_BUS_I2C0           42
+#define RST_BUS_I2C1           43
+#define RST_BUS_I2C2           44
+#define RST_BUS_SCR            45
+#define RST_BUS_UART0          46
+#define RST_BUS_UART1          47
+#define RST_BUS_UART2          48
+#define RST_BUS_UART3          49
+#define RST_BUS_UART4          50
+
+#endif /* _DT_BINDINGS_RST_SUN50I_A64_H_ */