When defined, the linker checks that the actual size does
not exceed it.
- CONFIG_SPL_TEXT_BASE
- TEXT_BASE for linking the SPL binary.
-
CONFIG_SPL_RELOC_TEXT_BASE
Address to relocate to. If unspecified, this is equal to
CONFIG_SPL_TEXT_BASE (i.e. no relocation is done).
U-Boot stage. Set this to the path of the linker-script to
be used for SPL.
+config SPL_TEXT_BASE
+ hex "SPL Text Base"
+ default ISW_ENTRY_ADDR if AM43XX || AM33XX || OMAP54XX || ARCH_KEYSTONE
+ default 0x0
+ help
+ The address in memory that SPL will be running from.
+
config SPL_BOARD_INIT
bool "Call board-specific initialization in SPL"
help
CONFIG_SATAPWR="PC3"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_MMC_SUNXI_SLOT_EXTRA=1
CONFIG_USB1_VBUS_PIN="PB10"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_VIDEO_LCD_POWER="PB10"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_VIDEO_LCD_POWER="AXP0-0"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_CMD_DFU=y
# CONFIG_CMD_FLASH is not set
CONFIG_SPL_SPI_SUNXI=y
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_CMD_DFU=y
# CONFIG_CMD_FLASH is not set
CONFIG_SATAPWR="PC3"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_CMD_DFU=y
# CONFIG_CMD_FLASH is not set
CONFIG_SATAPWR="PC3"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SATAPWR="PB8"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SATAPWR="PB8"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SATAPWR="PC3"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_GMAC_TX_DELAY=4
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_GMAC_TX_DELAY=4
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_VIDEO_LCD_BL_EN="PB2"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB1_VBUS_PIN="PB10"
CONFIG_VIDEO_COMPOSITE=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_DRAM_CLK=432
CONFIG_USB1_VBUS_PIN="PG13"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_MISC_INIT_R is not set
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFFE000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_FLASH is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_MISC_INIT_R is not set
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFFE000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_FLASH is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFFE000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_IMLS=y
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFFE000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_IMLS=y
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-r40-bananapi-m2-ultra"
CONFIG_GMAC_TX_DELAY=3
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_USB0_ID_DET="PH8"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_PARTITION_UUIDS is not set
CONFIG_GMAC_TX_DELAY=3
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_MISC_INIT_R is not set
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFF800000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_ENV_SUPPORT=y
CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y
CONFIG_USB0_VBUS_PIN="PB10"
CONFIG_VIDEO_COMPOSITE=y
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_CMD_DFU=y
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_MACH_SUN5I=y
CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y
CONFIG_USB0_VBUS_PIN="PB10"
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_MTDPARTS=y
CONFIG_USB1_VBUS_PIN=""
CONFIG_USB2_VBUS_PIN=""
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_PANEL_HITACHI_TX18D42VM=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_VIDEO_LCD_PANEL_I2C_SCL="PA24"
CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SATAPWR="PB8"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB1_VBUS_PIN="PH14"
CONFIG_USB3_VBUS_PIN="PH15"
CONFIG_AXP_GPIO=y
+CONFIG_SPL_TEXT_BASE=0x10060
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SATAPWR="PB8"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_GMAC_TX_DELAY=1
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_CMD_DFU=y
# CONFIG_CMD_FLASH is not set
CONFIG_AXP_GPIO=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_CONSOLE_MUX=y
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_VIDEO_VGA_VIA_LCD=y
CONFIG_VIDEO_VGA_EXTERNAL_DAC_EN="PH25"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
# CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW is not set
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SATAPWR="PB8"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_GMAC_TX_DELAY=4
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL=y
CONFIG_MACH_SUN8I_V3S=y
CONFIG_DRAM_CLK=360
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_GMAC_TX_DELAY=3
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SATAPWR="PH2"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB1_VBUS_PIN=""
CONFIG_USB2_VBUS_PIN=""
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=384
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_MISC_INIT_R=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFF00000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_IMLS=y
CONFIG_MISC_INIT_R=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFF00000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_IMLS=y
CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_VIDEO_LCD_BL_PWM="PH13"
CONFIG_VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_MACH_SUN4I=y
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_USB1_VBUS_PIN="PC27"
CONFIG_USB2_VBUS_PIN=""
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_VIDEO_COMPOSITE=y
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB1_VBUS_PIN="PC27"
CONFIG_USB2_VBUS_PIN=""
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_VIDEO_VGA=y
CONFIG_VIDEO_COMPOSITE=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_VIDEO_COMPOSITE=y
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB1_VBUS_PIN="PC27"
CONFIG_USB2_VBUS_PIN=""
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_USB1_VBUS_PIN="PH4"
CONFIG_USB3_VBUS_PIN="PH5"
CONFIG_AXP_GPIO=y
+CONFIG_SPL_TEXT_BASE=0x10060
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_USB0_VBUS_PIN="PB9"
CONFIG_VIDEO_COMPOSITE=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
CONFIG_AXP_GPIO=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_MTDPARTS=y
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_GMAC_TX_DELAY=3
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_GMAC_TX_DELAY=3
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFF800000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_DRIVERS_MISC_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xD0001000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xD0001000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFF800000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_DRIVERS_MISC_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xD0001000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xD0001000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFF800000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_DRIVERS_MISC_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xD0001000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xD0001000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFF800000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_DRIVERS_MISC_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xD0001000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xD0001000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFF800000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_ENV_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFF800000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_ENV_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFF800000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_ENV_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFF800000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_ENV_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFF800000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_ENV_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFF800000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_ENV_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFF800000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_ENV_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFF800000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_ENV_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFF800000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_ENV_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFF800000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_ENV_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFF800000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_TPL=y
CONFIG_TPL_ENV_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xf8f81000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_USB1_VBUS_PIN=""
CONFIG_USB2_VBUS_PIN=""
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_CMD_DFU=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB1_VBUS_PIN=""
CONFIG_USB2_VBUS_PIN=""
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SATAPWR="PD25"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_CONSOLE_MUX=y
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_USB1_VBUS_PIN="PL7"
CONFIG_USB3_VBUS_PIN="PL8"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x10060
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_CRYPTO_SUPPORT=y
CONFIG_SPL_HASH_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOOTDELAY=10
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOOTDELAY=10
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOOTDELAY=10
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOOTDELAY=10
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOOTDELAY=10
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOOTDELAY=10
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOOTDELAY=10
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOOTDELAY=10
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOOTDELAY=10
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOOTDELAY=10
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOOTDELAY=10
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOOTDELAY=10
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOOTDELAY=10
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_BOOTDELAY=10
CONFIG_BOARD_EARLY_INIT_R=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_TL059WV5C0=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_VIDEO_LCD_PANEL_LVDS=y
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_MMC0_CD_PIN="PB3"
CONFIG_USB1_VBUS_PIN="PG12"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW is not set
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_VIDEO_LCD_BL_PWM="PH13"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x10060
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_TEXT_BASE=0xe6300000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_SPL=y
CONFIG_BOOTDELAY=10
+CONFIG_SPL_TEXT_BASE=0x40200800
# CONFIG_SPL_FS_EXT4 is not set
CONFIG_HUSH_PARSER=y
# CONFIG_CMDLINE_EDITING is not set
CONFIG_BOOTDELAY=10
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_TEXT_BASE=0x40200000
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
# CONFIG_SPL_FS_EXT4 is not set
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_MISC_INIT_R is not set
CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_TEXT_BASE=0x403018E0
CONFIG_SPL_ETH_SUPPORT=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_NET_SUPPORT=y
# CONFIG_MISC_INIT_R is not set
CONFIG_VERSION_VARIABLE=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x40300000
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_DMA_SUPPORT=y
# CONFIG_MISC_INIT_R is not set
CONFIG_VERSION_VARIABLE=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x40306D50
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_DMA_SUPPORT=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run get_kern_${boot}; run get_fdt_${boot}; run run_kern"
# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL_TEXT_BASE=0x80080000
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_USE_BOOTCOMMAND=y
# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL_TEXT_BASE=0x41c00000
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run get_kern_${boot}; run get_fdt_${boot}; run run_kern"
# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL_TEXT_BASE=0x80080000
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
CONFIG_USE_BOOTCOMMAND=y
# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL_TEXT_BASE=0x41c00000
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_VIDEO_DE2 is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x10060
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0x80108000
CONFIG_SYS_PROMPT="Apalis TK1 # "
# CONFIG_CMD_IMI is not set
CONFIG_CMD_DFU=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_BOUNCE_BUFFER=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_DMA_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_USB_HOST_SUPPORT=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_ARCH_MISC_INIT=y
+CONFIG_SPL_TEXT_BASE=0x80108000
CONFIG_SYS_PROMPT="Apalis T30 # "
# CONFIG_CMD_IMI is not set
CONFIG_CMD_DFU=y
CONFIG_BOOTARGS="console=ttySMX0,115200 mtdparts=mxc_nand.0:1M(u-boot)ro,512K(env),512K(env2),512K(firmware),512K(dtb),5M(kernel),-(rootfs) ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs "
CONFIG_VERSION_VARIABLE=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0xA0000000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="BIOS> "
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_F=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0x00001000
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_MMC=y
CONFIG_SILENT_CONSOLE=y
CONFIG_CONSOLE_MUX=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0x02023400
CONFIG_SYS_PROMPT="ARNDALE # "
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL_TEXT_BASE=0xfffc0000
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_USB2_VBUS_PIN="PH12"
CONFIG_VIDEO_COMPOSITE=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_GMAC_TX_DELAY=3
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_MMC0_CD_PIN="PH13"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-v40-bananapi-m2-berry"
CONFIG_MACPWR="PD6"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_MACPWR="PD6"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x10060
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DRAM_CLK=408
CONFIG_MMC0_CD_PIN=""
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_MMC0_CD_PIN="PH13"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x10060
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_CONSOLE_MUX=y
CONFIG_SYS_STDIO_DEREGISTER=y
+CONFIG_SPL_TEXT_BASE=0x80108000
CONFIG_SYS_PROMPT="Tegra30 (Beaver) # "
# CONFIG_CMD_IMI is not set
CONFIG_CMD_DFU=y
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_F=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0x00001000
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_FLASH is not set
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_TEXT_BASE=0x40200800
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SYS_PROMPT="Cairo # "
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_CONSOLE_MUX=y
CONFIG_SYS_STDIO_DEREGISTER=y
+CONFIG_SPL_TEXT_BASE=0x80108000
CONFIG_SYS_PROMPT="Tegra30 (Cardhu) # "
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_FLASH is not set
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_CONSOLE_MUX=y
CONFIG_SYS_STDIO_DEREGISTER=y
+CONFIG_SPL_TEXT_BASE=0x80108000
CONFIG_SYS_PROMPT="Tegra124 (TK1-SOM) # "
# CONFIG_CMD_IMI is not set
CONFIG_CMD_DFU=y
CONFIG_MISC_INIT_R=y
CONFIG_BOUNCE_BUFFER=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_FS_EXT4=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_DEFAULT_FDT_FILE="rk3288-veyron-mickey.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0xff704000
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
CONFIG_SPL_SPI_LOAD=y
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-gru-bob.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0xff8c2000
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
CONFIG_SPL_SPI_LOAD=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0xff704000
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
CONFIG_SPL_SPI_LOAD=y
CONFIG_MISC_INIT_R=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_LAST_STAGE_INIT=y
+CONFIG_SPL_TEXT_BASE=0xfffd0000
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_CPU_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_DEFAULT_FDT_FILE="rk3288-veyron-minnie.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0xff704000
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
CONFIG_SPL_SPI_LOAD=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0xff704000
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
CONFIG_SPL_SPI_LOAD=y
CONFIG_MISC_INIT_R=y
CONFIG_DISPLAY_CPUINFO=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0xf4000a00
# CONFIG_SPL_BANNER_PRINT is not set
# CONFIG_TPL_BANNER_PRINT is not set
CONFIG_HUSH_PARSER=y
CONFIG_SPI_BOOT=y
CONFIG_BOOTDELAY=3
CONFIG_BOUNCE_BUFFER=y
+CONFIG_SPL_TEXT_BASE=0x00911000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x80
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0x40000030
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x141
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd; run legacy_bootcmd"
CONFIG_MISC_INIT_R=y
CONFIG_BOUNCE_BUFFER=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x80
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_BOOTDELAY=3
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+CONFIG_SPL_TEXT_BASE=0x40200800
# CONFIG_SPL_FS_EXT4 is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="CM-T3x # "
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SPL_TEXT_BASE=0x40300350
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x480
CONFIG_SPL_FS_EXT4=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_MISC_INIT_R is not set
CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_TEXT_BASE=0x40300000
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200
# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_SPL_SATA_SUPPORT=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_BOUNCE_BUFFER=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_DMA_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_USB_HOST_SUPPORT=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_ARCH_MISC_INIT=y
+CONFIG_SPL_TEXT_BASE=0x00108000
CONFIG_SYS_PROMPT="Colibri T20 # "
# CONFIG_CMD_IMI is not set
CONFIG_CMD_DFU=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_ARCH_MISC_INIT=y
+CONFIG_SPL_TEXT_BASE=0x80108000
CONFIG_SYS_PROMPT="Colibri T30 # "
# CONFIG_CMD_IMI is not set
CONFIG_CMD_DFU=y
CONFIG_VIDEO_LCD_BL_PWM="PH13"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_LAST_STAGE_INIT=y
+CONFIG_SPL_TEXT_BASE=0x40000030
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x300000
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_HUSH_PARSER=y
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x80000000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_HUSH_PARSER=y
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x80000000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SEPARATE_BSS=y
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x80000000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_CONSOLE_MUX=y
CONFIG_SYS_STDIO_DEREGISTER=y
+CONFIG_SPL_TEXT_BASE=0x80108000
CONFIG_SYS_PROMPT="Tegra114 (Dalmore) # "
# CONFIG_CMD_IMI is not set
CONFIG_CMD_DFU=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0x40004030
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
# CONFIG_CMD_FLASH is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0x40000030
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
# CONFIG_CMD_FLASH is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0x40000030
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0x40004030
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
# CONFIG_CMD_FLASH is not set
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x00000000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_NAND_SUPPORT=y
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_TEXT_BASE=0x40200000
CONFIG_SPL_OS_BOOT=y
# CONFIG_CMD_IMI is not set
CONFIG_CMD_SPL=y
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
CONFIG_BOUNCE_BUFFER=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_MISC_INIT_R=y
CONFIG_BOUNCE_BUFFER=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_BOOTCOUNT_LIMIT=y
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
CONFIG_SPL_DMA_SUPPORT=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_MISC_INIT_R=y
CONFIG_BOUNCE_BUFFER=y
+CONFIG_SPL_TEXT_BASE=0x00908000
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
CONFIG_SPL_DMA_SUPPORT=y
# CONFIG_MISC_INIT_R is not set
CONFIG_VERSION_VARIABLE=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x40300000
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_DMA_SUPPORT=y
# CONFIG_MISC_INIT_R is not set
CONFIG_VERSION_VARIABLE=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x40306D50
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_DMA_SUPPORT=y
CONFIG_BOOTARGS="console=ttyS0,115200"
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0x40004030
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
# CONFIG_CMD_FLASH is not set
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_TEXT_BASE=0x40300000
# CONFIG_SPL_I2C_SUPPORT is not set
# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_SYS_PROMPT="duovero # "
CONFIG_NR_DRAM_BANKS=2
CONFIG_SPL=y
CONFIG_BOOTDELAY=10
+CONFIG_SPL_TEXT_BASE=0x40200000
# CONFIG_SPL_FS_EXT4 is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="ECO5-PK # "
CONFIG_BOOTDELAY=3
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
+CONFIG_SPL_TEXT_BASE=0xffff0000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_NOR_SUPPORT=y
CONFIG_HUSH_PARSER=y
# CONFIG_DRAM_ODT_EN is not set
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x10060
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0x10081000
CONFIG_SPL_STACK_R=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_DEFAULT_FDT_FILE="rk3229-evb.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0x10081000
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x200
CONFIG_CMD_GPT=y
CONFIG_DEFAULT_FDT_FILE="rk3288-evb-rk808.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0xff704000
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
CONFIG_CMD_GPIO=y
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-evb.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0xff8c2000
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
CONFIG_SPL_ATF=y
CONFIG_DEFAULT_FDT_FILE="rk3288-fennec.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0xff704000
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
CONFIG_CMD_GPIO=y
CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0xff8c2000
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
CONFIG_SPL_ATF=y
CONFIG_DEFAULT_FDT_FILE="rk3288-firefly.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0xff704000
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
CONFIG_CMD_GPIO=y
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-firefly.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0xff8c2000
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
CONFIG_SPL_ATF=y
CONFIG_VIDEO_LCD_BL_PWM="PH0"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256k(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs rw"
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_SPL_TEXT_BASE=0x300000
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SEPARATE_BSS=y
# CONFIG_TPL_BANNER_PRINT is not set
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_TEXT_BASE=0xe6300000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_BOUNCE_BUFFER=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_DMA_SUPPORT=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_BOUNCE_BUFFER=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_DMA_SUPPORT=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_BOUNCE_BUFFER=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_DMA_SUPPORT=y
CONFIG_AXP_GPIO=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_CONSOLE_MUX=y
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_TARGET_HARMONY=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_SYS_STDIO_DEREGISTER=y
+CONFIG_SPL_TEXT_BASE=0x00108000
CONFIG_SYS_PROMPT="Tegra20 (Harmony) # "
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_FLASH is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0x40000030
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x141
# CONFIG_CMD_FLASH is not set
CONFIG_MACPWR="PH21"
CONFIG_VIDEO_COMPOSITE=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_VIDEO_LCD_BL_PWM="PH0"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_VIDEO_LCD_POWER="PH22"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_CMD_UNZIP=y
# CONFIG_CMD_FLASH is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SPL_TEXT_BASE=0x40200000
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
# CONFIG_SPL_FS_EXT4 is not set
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_BOOTDELAY=3
CONFIG_BOUNCE_BUFFER=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_DMA_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_BOOTDELAY=3
CONFIG_BOUNCE_BUFFER=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_OS_BOOT=y
CONFIG_CRC32_VERIFY=y
CONFIG_CMD_MEMTEST=y
CONFIG_BOOTDELAY=3
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_BOUNCE_BUFFER=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_DMA_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
CONFIG_BOUNCE_BUFFER=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_RAW_IMAGE_SUPPORT=y
CONFIG_SPL_SEPARATE_BSS=y
# CONFIG_TPL_BANNER_PRINT is not set
CONFIG_BOOTDELAY=3
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_BOUNCE_BUFFER=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_BOOTDELAY=3
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_BOUNCE_BUFFER=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_BOOTDELAY=3
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_BOUNCE_BUFFER=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_DMA_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_BOOTDELAY=3
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_BOUNCE_BUFFER=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_BOOTDELAY=3
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_BOUNCE_BUFFER=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="geam6ul> "
CONFIG_BOOTDELAY=3
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_BOUNCE_BUFFER=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_DMA_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_BOOTDELAY=3
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_BOUNCE_BUFFER=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="isiotmx6ul> "
CONFIG_BOOTDELAY=3
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_BOUNCE_BUFFER=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_DMA_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/imx8m/imximage.cfg"
+CONFIG_SPL_TEXT_BASE=0x7E1000
CONFIG_SPL_BOARD_INIT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GPIO=y
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_VIDEO_LCD_BL_EN="PA25"
CONFIG_VIDEO_LCD_BL_PWM="PH13"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x80000000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_USB0_VBUS_PIN="PB9"
CONFIG_VIDEO_COMPOSITE=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_CONSOLE_MUX=y
CONFIG_SYS_STDIO_DEREGISTER=y
+CONFIG_SPL_TEXT_BASE=0x80108000
CONFIG_SYS_PROMPT="Tegra124 (Jetson TK1) # "
# CONFIG_CMD_IMI is not set
CONFIG_CMD_DFU=y
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+CONFIG_SPL_TEXT_BASE=0x40300000
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=2
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_TEXT_BASE=0xe6300000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_RAM_SUPPORT=y
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
CONFIG_BOUNCE_BUFFER=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_RAW_IMAGE_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_AUTOBOOT_KEYED=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0x10081000
CONFIG_SPL_STACK_R=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_TEXT_BASE=0xe6300000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_DRAM_CLK=672
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DRAM_CLK=672
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DRAM_CLK=672
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x10060
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_ARCH_EARLY_INIT_R=y
+CONFIG_SPL_TEXT_BASE=0x00000000
CONFIG_SPL_BOOTROM_SUPPORT=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
# CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set
CONFIG_DEFAULT_FDT_FILE="imx6ul-liteboard.dtb"
CONFIG_BOUNCE_BUFFER=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT,SD_BOOT_QSPI"
CONFIG_MISC_INIT_R=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x10000000
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8
CONFIG_CMD_BOOTZ=y
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_MISC_INIT_R=y
+CONFIG_SPL_TEXT_BASE=0x10000000
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8
CONFIG_SPL_ENV_SUPPORT=y
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_MISC_INIT_R=y
+CONFIG_SPL_TEXT_BASE=0x10000000
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8
CONFIG_SPL_ENV_SUPPORT=y
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_MISC_INIT_R=y
+CONFIG_SPL_TEXT_BASE=0x10000000
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8
CONFIG_SPL_ENV_SUPPORT=y
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_MISC_INIT_R=y
+CONFIG_SPL_TEXT_BASE=0x10000000
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8
CONFIG_SPL_CRYPTO_SUPPORT=y
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_MISC_INIT_R=y
+CONFIG_SPL_TEXT_BASE=0x10000000
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8
CONFIG_SPL_ENV_SUPPORT=y
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_MISC_INIT_R=y
+CONFIG_SPL_TEXT_BASE=0x10000000
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)"
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_MISC_INIT_R=y
+CONFIG_SPL_TEXT_BASE=0x10000000
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)"
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_MISC_INIT_R=y
+CONFIG_SPL_TEXT_BASE=0x10000000
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)"
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_MISC_INIT_R=y
+CONFIG_SPL_TEXT_BASE=0x10000000
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)"
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_MISC_INIT_R=y
+CONFIG_SPL_TEXT_BASE=0x10000000
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0
CONFIG_SPL_CRYPTO_SUPPORT=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)"
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_MISC_INIT_R=y
+CONFIG_SPL_TEXT_BASE=0x10000000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)"
CONFIG_MISC_INIT_R=y
+CONFIG_SPL_TEXT_BASE=0x10000000
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
CONFIG_SPL_CRYPTO_SUPPORT=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)"
CONFIG_MISC_INIT_R=y
+CONFIG_SPL_TEXT_BASE=0x10000000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)"
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_MISC_INIT_R=y
+CONFIG_SPL_TEXT_BASE=0x10000000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)"
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_MISC_INIT_R=y
+CONFIG_SPL_TEXT_BASE=0x10000000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:2m(uboot),14m(free)"
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_MISC_INIT_R=y
+CONFIG_SPL_TEXT_BASE=0x10000000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_MISC_INIT_R=y
+CONFIG_SPL_TEXT_BASE=0x10000000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
CONFIG_MISC_INIT_R=y
+CONFIG_SPL_TEXT_BASE=0x10000000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
CONFIG_MISC_INIT_R=y
+CONFIG_SPL_TEXT_BASE=0x10000000
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
CONFIG_SPL_CRYPTO_SUPPORT=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
CONFIG_MISC_INIT_R=y
+CONFIG_SPL_TEXT_BASE=0x10000000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0x1800a000
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
CONFIG_SPL_ENV_SUPPORT=y
# CONFIG_USE_BOOTCOMMAND is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0x1800a000
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_MISC_INIT_R=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0x1800a000
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
CONFIG_SPL_CRYPTO_SUPPORT=y
CONFIG_MISC_INIT_R=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0x1800a000
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_SPL_TEXT_BASE=0x1800a000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_SPL_TEXT_BASE=0x1800a000
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_MISC_INIT_R=y
+CONFIG_SPL_TEXT_BASE=0x1800a000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_TEXT_BASE=0x70008000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0x40004030
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
# CONFIG_CMD_FLASH is not set
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/liebherr/mccmon6/mon6_imximage_nor.cfg"
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_BOUNCE_BUFFER=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_NOR_SUPPORT=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/liebherr/mccmon6/mon6_imximage_sd.cfg"
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_BOUNCE_BUFFER=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_NOR_SUPPORT=y
CONFIG_BOOTDELAY=3
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+CONFIG_SPL_TEXT_BASE=0x40200000
# CONFIG_SPL_FS_EXT4 is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="mcx # "
CONFIG_FIT=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_SYS_STDIO_DEREGISTER=y
+CONFIG_SPL_TEXT_BASE=0x00108000
CONFIG_SYS_PROMPT="Tegra20 (Medcom-Wide) # "
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_FLASH is not set
CONFIG_DEFAULT_FDT_FILE="rk3288-miqi.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0xff704000
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
CONFIG_CMD_GPIO=y
CONFIG_USB1_VBUS_PIN="PH24"
CONFIG_USB2_VBUS_PIN=""
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DRAM_EMR1=0
CONFIG_USB1_VBUS_PIN="PB10"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_MACH_SUN4I=y
CONFIG_USB2_VBUS_PIN="PH12"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_DEFAULT_FDT_FILE="mt7629-rfb"
# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SPL_TEXT_BASE=0x201000
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_NOR_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_BOOTDELAY=10
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+CONFIG_SPL_TEXT_BASE=0x40200000
# CONFIG_SPL_FS_EXT4 is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="mt_ventoux => "
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0x00001000
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_BOOTEFI is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0x00001000
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_FLASH is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0x00001000
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_FLASH is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0x00001000
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_FLASH is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0x00001000
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_FLASH is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0x00001000
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_FLASH is not set
CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0x87dc0000
CONFIG_SPL_NAND_SUPPORT=y
# CONFIG_AUTO_COMPLETE is not set
CONFIG_CMD_BOOTZ=y
CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
CONFIG_BOUNCE_BUFFER=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_FS_EXT4=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,SPL,MX6QDL"
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_BOUNCE_BUFFER=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_USB_HOST_SUPPORT=y
CONFIG_SPL_USB_GADGET=y
CONFIG_SPL_USB_ETHER=y
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_BOUNCE_BUFFER=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_FIT_IMAGE_TINY=y
CONFIG_SPL_FS_EXT4=y
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_BOUNCE_BUFFER=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_FIT_IMAGE_TINY=y
CONFIG_SPL_FS_EXT4=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_BOUNCE_BUFFER=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_FS_EXT4=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_BOUNCE_BUFFER=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_FS_EXT4=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_BOUNCE_BUFFER=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_FS_EXT4=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_BOUNCE_BUFFER=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_FS_EXT4=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_MACH_SUN50I=y
CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x10060
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=408
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_MMC0_CD_PIN="PH13"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DRAM_ZQ=3881977
# CONFIG_DRAM_ODT_EN is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x10060
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
# CONFIG_VIDEO_DE2 is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_CONSOLE_MUX=y
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
# CONFIG_VIDEO_DE2 is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_CONSOLE_MUX=y
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_MACPWR="PD6"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x10060
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_VERSION_VARIABLE=y
CONFIG_BOUNCE_BUFFER=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_FS_EXT4=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_BOOTSTAGE_STASH_ADDR=0x83000000
CONFIG_SYS_STDIO_DEREGISTER=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0x80108000
CONFIG_SYS_PROMPT="Tegra124 (Nyan-big) # "
# CONFIG_CMD_IMI is not set
CONFIG_CMD_DFU=y
CONFIG_MMC0_CD_PIN=""
CONFIG_SPL_SPI_SUNXI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x10060
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_DEFAULT_FDT_FILE="logicpd-torpedo-35xx-devkit.dtb"
CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_TEXT_BASE=0x40200000
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SEPARATE_BSS=y
# CONFIG_SPL_FS_EXT4 is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_DEFAULT_FDT_FILE="logicpd-som-lv-35xx-devkit.dtb"
CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_TEXT_BASE=0x40200000
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SEPARATE_BSS=y
# CONFIG_SPL_FS_EXT4 is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_DEFAULT_FDT_FILE="omap3-beagle.dtb"
CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_TEXT_BASE=0x40200000
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SEPARATE_BSS=y
# CONFIG_SPL_FS_EXT4 is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_DEFAULT_FDT_FILE="omap3-evm.dtb"
CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_TEXT_BASE=0x40200000
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SEPARATE_BSS=y
# CONFIG_SPL_FS_EXT4 is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_BOARD_OMAP3_HA"
CONFIG_BOOTDELAY=3
+CONFIG_SPL_TEXT_BASE=0x40200800
# CONFIG_SPL_FS_EXT4 is not set
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_IMI is not set
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_TEXT_BASE=0x40200000
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SEPARATE_BSS=y
# CONFIG_SPL_FS_EXT4 is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_DEFAULT_FDT_FILE="logicpd-som-lv-37xx-devkit.dtb"
CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_TEXT_BASE=0x40200000
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SEPARATE_BSS=y
# CONFIG_SPL_FS_EXT4 is not set
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_TEXT_BASE=0x40200000
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_TEXT_BASE=0x40300000
# CONFIG_SPL_FS_EXT4 is not set
# CONFIG_SPL_I2C_SUPPORT is not set
# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_TEXT_BASE=0x40300000
# CONFIG_SPL_I2C_SUPPORT is not set
# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_CMD_ASKENV=y
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_TEXT_BASE=0x40300000
# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_SPL_OS_BOOT=y
CONFIG_CMD_SPL=y
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x80000000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xb5
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_DEFAULT_FDT_FILE="imx6ul-opos6uldev.dtb"
CONFIG_VERSION_VARIABLE=y
CONFIG_BOUNCE_BUFFER=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_DRAM_CLK=672
CONFIG_USB1_VBUS_PIN="PG13"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_MMC0_CD_PIN="PF6"
# CONFIG_PSCI_RESET is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x20060
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=672
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=672
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_MMC0_CD_PIN="PF6"
# CONFIG_PSCI_RESET is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x20060
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_MACPWR="PD6"
CONFIG_SPL_SPI_SUNXI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x10060
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=624
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_DRAM_CLK=624
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_MACPWR="PD6"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_USB1_VBUS_PIN="PG13"
CONFIG_SATAPWR="PG11"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_DRAM_ZQ=3881977
# CONFIG_DRAM_ODT_EN is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x10060
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_SPI_SUNXI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_CONSOLE_MUX=y
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-orangepi-r1"
CONFIG_SUN8I_EMAC=y
CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
CONFIG_SPL_SPI_SUNXI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x10060
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_SPI_SUNXI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_CONSOLE_MUX=y
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-orangepi-zero"
CONFIG_SUN8I_EMAC=y
CONFIG_MMC0_CD_PIN="PH13"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x10060
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DRAM_ZQ=3881977
# CONFIG_DRAM_ODT_EN is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x10060
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0x02021410
CONFIG_SYS_PROMPT="ORIGEN # "
# CONFIG_CMD_XIMG is not set
CONFIG_CMD_THOR_DOWNLOAD=y
CONFIG_MISC_INIT_R=y
CONFIG_BOUNCE_BUFFER=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_USB1_VBUS_PIN="PD12"
CONFIG_AXP_GPIO=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_PARTITION_UUIDS is not set
CONFIG_TARGET_PAZ00=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_SYS_STDIO_DEREGISTER=y
+CONFIG_SPL_TEXT_BASE=0x00108000
CONFIG_SYS_PROMPT="Tegra20 (Paz00) MOD # "
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_FLASH is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_BOUNCE_BUFFER=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_DMA_SUPPORT=y
CONFIG_SPL_FS_EXT4=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_FIT_BEST_MATCH=y
CONFIG_SILENT_CONSOLE=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0x02024410
CONFIG_SYS_PROMPT="Peach-Pi # "
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_FIT_BEST_MATCH=y
CONFIG_SILENT_CONSOLE=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0x02024410
CONFIG_SYS_PROMPT="Peach-Pit # "
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_BOUNCE_BUFFER=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_DMA_SUPPORT=y
CONFIG_SPL_FS_EXT4=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_DEFAULT_FDT_FILE="rk3288-phycore-rdk.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0xff704000
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_BOOTDELAY=3
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x00909000
CONFIG_SPL_USB_HOST_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_CMD_MEMTEST=y
CONFIG_DEFAULT_FDT_FILE="imx6ul-pico-hobbit.dtb"
CONFIG_BOUNCE_BUFFER=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_USB_HOST_SUPPORT=y
CONFIG_SPL_USB_GADGET=y
CONFIG_SPL_USB_SDP_SUPPORT=y
CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
CONFIG_DEFAULT_FDT_FILE="imx7d-pico-hobbit.dtb"
CONFIG_BOUNCE_BUFFER=y
+CONFIG_SPL_TEXT_BASE=0x00911000
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_USB_HOST_SUPPORT=y
CONFIG_SPL_USB_GADGET=y
CONFIG_DEFAULT_FDT_FILE="ask"
CONFIG_BOUNCE_BUFFER=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_USB_HOST_SUPPORT=y
CONFIG_SPL_USB_GADGET=y
CONFIG_SPL_USB_SDP_SUPPORT=y
CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
CONFIG_DEFAULT_FDT_FILE="ask"
CONFIG_BOUNCE_BUFFER=y
+CONFIG_SPL_TEXT_BASE=0x00911000
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_USB_HOST_SUPPORT=y
CONFIG_SPL_USB_GADGET=y
CONFIG_DEFAULT_FDT_FILE="imx6ul-pico-pi.dtb"
CONFIG_BOUNCE_BUFFER=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_USB_HOST_SUPPORT=y
CONFIG_SPL_USB_GADGET=y
CONFIG_SPL_USB_SDP_SUPPORT=y
CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
CONFIG_DEFAULT_FDT_FILE="imx7d-pico-pi.dtb"
CONFIG_BOUNCE_BUFFER=y
+CONFIG_SPL_TEXT_BASE=0x00911000
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_USB_HOST_SUPPORT=y
CONFIG_SPL_USB_GADGET=y
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x300000
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot> "
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_SPL_SPI_SUNXI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x10060
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
CONFIG_PINE64_DT_SELECTION=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x10060
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_PSCI_RESET is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x20060
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DRAM_ZQ=3881949
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_R_I2C_ENABLE=y
+CONFIG_SPL_TEXT_BASE=0x10060
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_MISC_INIT_R=y
CONFIG_BOUNCE_BUFFER=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_DMA_SUPPORT=y
CONFIG_SPL_FS_EXT4=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_MISC_INIT_R=y
CONFIG_BOUNCE_BUFFER=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_DMA_SUPPORT=y
CONFIG_SPL_FS_EXT4=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_CONSOLE_MUX=y
CONFIG_SYS_STDIO_DEREGISTER=y
+CONFIG_SPL_TEXT_BASE=0x00108000
CONFIG_SYS_PROMPT="Tegra20 (Plutux) # "
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_FLASH is not set
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_FDT_FILE="rk3288-popmetal.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0xff704000
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
CONFIG_CMD_GPIO=y
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_TEXT_BASE=0xe6300000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_MISC_INIT_R=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0xff8c2000
CONFIG_SPL_BOARD_INIT=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
# CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_LAST_STAGE_INIT=y
+CONFIG_SPL_TEXT_BASE=0xfffd0000
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_CPU_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_DRAM_CLK=384
CONFIG_USB1_VBUS_PIN="PG13"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_RAW_IMAGE_SUPPORT=y
CONFIG_SPL_FS_EXT4=y
CONFIG_SPL_OS_BOOT=y
CONFIG_DEFAULT_FDT_FILE="rk3288-rock2-square.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0xff704000
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
CONFIG_CMD_GPIO=y
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock960.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0xff8c2000
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
CONFIG_SPL_ATF=y
CONFIG_DEFAULT_FDT_FILE="rk3188-radxarock.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0x10080800
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
CONFIG_RANDOM_UUID=y
CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk1p2 rw rootwait"
CONFIG_MISC_INIT_R=y
# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SPL_TEXT_BASE=0x200000
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait"
CONFIG_MISC_INIT_R=y
# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SPL_TEXT_BASE=0x200000
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SPL_TEXT_BASE=0x200000
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_DISPLAY_PRINT=y
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait"
# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SPL_TEXT_BASE=0x200000
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk1p2 rw rootwait"
CONFIG_MISC_INIT_R=y
# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SPL_TEXT_BASE=0x200000
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p1 rw rootwait"
CONFIG_MISC_INIT_R=y
# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SPL_TEXT_BASE=0x200000
CONFIG_SPL_SPI_LOAD=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait"
# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SPL_TEXT_BASE=0x300000
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256K(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs"
# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SPL_TEXT_BASE=0x300000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SPL_TEXT_BASE=0x300000
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SPL_TEXT_BASE=0x300000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256K(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs"
# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SPL_TEXT_BASE=0x300000
CONFIG_SPL_SPI_LOAD=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait"
CONFIG_MISC_INIT_R=y
# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SPL_TEXT_BASE=0x200000
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256K(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs"
CONFIG_MISC_INIT_R=y
# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SPL_TEXT_BASE=0x200000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256K(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs"
CONFIG_MISC_INIT_R=y
# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SPL_TEXT_BASE=0x200000
CONFIG_SPL_SPI_LOAD=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SPL_TEXT_BASE=0x200000
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SPL_TEXT_BASE=0x200000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256K(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs"
# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SPL_TEXT_BASE=0x200000
CONFIG_SPL_SPI_LOAD=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_F=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0x00001000
CONFIG_HUSH_PARSER=y
CONFIG_CMD_MEMTEST=y
# CONFIG_CMD_FLASH is not set
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_F=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0x00001000
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_TEGRA20=y
CONFIG_TARGET_SEABOARD=y
CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_SPL_TEXT_BASE=0x00108000
CONFIG_SYS_PROMPT="Tegra20 (SeaBoard) # "
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_FLASH is not set
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_TEXT_BASE=0xe6300000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_VERSION_VARIABLE=y
CONFIG_BOUNCE_BUFFER=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_FS_EXT4=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SILENT_CONSOLE=y
CONFIG_CONSOLE_MUX=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0x02023400
CONFIG_SYS_PROMPT="SMDK5250 # "
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_SILENT_CONSOLE=y
CONFIG_CONSOLE_MUX=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0x02024410
CONFIG_SYS_PROMPT="SMDK5420 # "
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_USE_BOOTCOMMAND is not set
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0x02021410
CONFIG_SYS_PROMPT="SMDKV310 # "
# CONFIG_CMD_XIMG is not set
CONFIG_CMD_GPT=y
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+CONFIG_SPL_TEXT_BASE=0x40200000
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=2
CONFIG_FIT_BEST_MATCH=y
CONFIG_SILENT_CONSOLE=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0x02023400
CONFIG_SYS_PROMPT="snow # "
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_DEFAULT_FDT_FILE="socfpga_arria10_socdk_sdmmc.dtb"
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_BOUNCE_BUFFER=y
+CONFIG_SPL_TEXT_BASE=0xFFE00000
CONFIG_SPL_FPGA_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_CMD_ASKENV=y
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0xFFFF0000
CONFIG_SPL_SPI_LOAD=y
CONFIG_CMD_ASKENV=y
CONFIG_CMD_GREPENV=y
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0xFFFF0000
CONFIG_SPL_SPI_LOAD=y
CONFIG_CMD_ASKENV=y
CONFIG_CMD_GREPENV=y
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0xFFFF0000
CONFIG_SPL_SPI_LOAD=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0xFFFF0000
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_SPI_LOAD=y
CONFIG_CMD_ASKENV=y
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0xFFFF0000
CONFIG_SPL_SPI_LOAD=y
CONFIG_CMD_ASKENV=y
CONFIG_CMD_GREPENV=y
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0xFFFF0000
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_YMODEM_SUPPORT=y
CONFIG_CMD_ASKENV=y
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0xFFFF0000
CONFIG_SPL_SPI_LOAD=y
CONFIG_CMD_ASKENV=y
CONFIG_CMD_GREPENV=y
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0xFFFF0000
CONFIG_SPL_SPI_LOAD=y
CONFIG_CMD_ASKENV=y
CONFIG_CMD_GREPENV=y
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0xFFFF0000
CONFIG_SPL_SPI_LOAD=y
CONFIG_CMD_ASKENV=y
CONFIG_CMD_GREPENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0xFFFF0000
CONFIG_SPL_SPI_LOAD=y
CONFIG_CMD_ASKENV=y
CONFIG_CMD_GREPENV=y
CONFIG_IDENT_STRING="socfpga_stratix10"
CONFIG_SPL_FS_FAT=y
CONFIG_BOOTDELAY=5
+CONFIG_SPL_TEXT_BASE=0xFFE00000
CONFIG_SPL_SPI_LOAD=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="SOCFPGA_STRATIX10 # "
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0xFFFF0000
CONFIG_SPL_SPI_LOAD=y
CONFIG_CMD_ASKENV=y
CONFIG_CMD_GREPENV=y
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_SPL_SPI_SUNXI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x10060
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_FIT_BEST_MATCH=y
CONFIG_SILENT_CONSOLE=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0x02023400
CONFIG_SYS_PROMPT="spring # "
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x8000000
CONFIG_SYS_PROMPT="U-Boot > "
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n"
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
+CONFIG_SPL_TEXT_BASE=0x2FFC2500
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_TEXT_BASE=0xe6300000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_USB0_VBUS_DET="axp_vbus_detect"
CONFIG_USB1_VBUS_PIN="PH7"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_NR_DRAM_BANKS=2
CONFIG_SPL=y
CONFIG_BOOTDELAY=3
+CONFIG_SPL_TEXT_BASE=0x40200800
# CONFIG_SPL_FS_EXT4 is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="TAO-3530 # "
CONFIG_USB0_ID_DET="PH11"
CONFIG_AXP_GPIO=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_CONSOLE_MUX=y
CONFIG_SYS_STDIO_DEREGISTER=y
+CONFIG_SPL_TEXT_BASE=0x80108000
CONFIG_SYS_PROMPT="Tegra30 (TEC-NG) # "
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_FLASH is not set
CONFIG_FIT=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_SYS_STDIO_DEREGISTER=y
+CONFIG_SPL_TEXT_BASE=0x00108000
CONFIG_SYS_PROMPT="Tegra20 (TEC) # "
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_FLASH is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0x40004030
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_HUSH_PARSER=y
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SPL_TEXT_BASE=0x40300000
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
CONFIG_SPL_YMODEM_SUPPORT=y
# CONFIG_MISC_INIT_R is not set
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SPL_TEXT_BASE=0x40400000
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_DEFAULT_FDT_FILE="rk3288-tinker.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0xff704000
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL=y
CONFIG_BOOTDELAY=0
CONFIG_SILENT_CONSOLE=y
+CONFIG_SPL_TEXT_BASE=0x40200000
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="OMAP3 Tricorder # "
# CONFIG_CMD_IMI is not set
CONFIG_SYS_EXTRA_OPTIONS="FLASHCARD"
CONFIG_BOOTDELAY=0
CONFIG_SILENT_CONSOLE=y
+CONFIG_SPL_TEXT_BASE=0x40200000
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_IMI is not set
CONFIG_CMD_EEPROM=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_CONSOLE_MUX=y
CONFIG_SYS_STDIO_DEREGISTER=y
+CONFIG_SPL_TEXT_BASE=0x00108000
CONFIG_SYS_PROMPT="Tegra20 (TrimSlice) # "
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_FLASH is not set
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_F=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0x00001000
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_FLASH is not set
CONFIG_MISC_INIT_R=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0x40000030
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
# CONFIG_CMD_FLASH is not set
CONFIG_NR_DRAM_BANKS=2
CONFIG_SPL=y
CONFIG_BOOTDELAY=10
+CONFIG_SPL_TEXT_BASE=0x40200000
# CONFIG_SPL_FS_EXT4 is not set
CONFIG_SPL_OS_BOOT=y
CONFIG_HUSH_PARSER=y
CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd"
CONFIG_BOUNCE_BUFFER=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_FS_EXT4=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd"
CONFIG_BOUNCE_BUFFER=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_FS_EXT4=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="env exist ${bootdev}preboot && run ${bootdev}preboot"
CONFIG_LOGLEVEL=6
+CONFIG_SPL_TEXT_BASE=0x00040000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_NOR_SUPPORT=y
CONFIG_CMD_CONFIG=y
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="env exist ${bootdev}preboot && run ${bootdev}preboot"
CONFIG_LOGLEVEL=6
+CONFIG_SPL_TEXT_BASE=0x00100000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_NOR_SUPPORT=y
CONFIG_CMD_CONFIG=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_CONSOLE_MUX=y
CONFIG_SYS_STDIO_DEREGISTER=y
+CONFIG_SPL_TEXT_BASE=0x80108000
CONFIG_SYS_PROMPT="Tegra124 (Venice2) # "
# CONFIG_CMD_IMI is not set
CONFIG_CMD_DFU=y
CONFIG_TEGRA20=y
CONFIG_TARGET_VENTANA=y
CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_SPL_TEXT_BASE=0x00108000
CONFIG_SYS_PROMPT="Tegra20 (Ventana) # "
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_FLASH is not set
CONFIG_DEFAULT_FDT_FILE="rk3288-vyasa.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_TEXT_BASE=0xff704000
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
CONFIG_CMD_GPIO=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_BOUNCE_BUFFER=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_FS_EXT4=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9X5,SYS_USE_NANDFLASH"
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x300000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_NANDFLASH"
CONFIG_BOOTDELAY=3
+CONFIG_SPL_TEXT_BASE=0x300000
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/woodburn/imximage.cfg"
CONFIG_BOOTDELAY=3
# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SPL_TEXT_BASE=0x10002300
CONFIG_SPL_BOARD_INIT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x100
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_SPL_TEXT_BASE=0x00000000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SILENT_U_BOOT_ONLY=y
CONFIG_SILENT_CONSOLE_UPDATE_ON_RELOC=y
CONFIG_MISC_INIT_R=y
+CONFIG_SPL_TEXT_BASE=0x40000030
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_CMD_MEMINFO=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_MISC_INIT_R=y
# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SPL_TEXT_BASE=0xd2800b00
CONFIG_SPL_NOR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="X600> "
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_F=y
# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_TEXT_BASE=0x00001000
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
# CONFIG_BOARD_LATE_INIT is not set
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_SPL_TEXT_BASE=0xfffc0000
# CONFIG_CMDLINE_EDITING is not set
# CONFIG_AUTO_COMPLETE is not set
CONFIG_SYS_PROMPT="ZynqMP> "
# CONFIG_BOARD_LATE_INIT is not set
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_SPL_TEXT_BASE=0xfffc0000
# CONFIG_CMDLINE_EDITING is not set
# CONFIG_AUTO_COMPLETE is not set
CONFIG_SYS_PROMPT="ZynqMP> "
# CONFIG_IMAGE_FORMAT_LEGACY is not set
# CONFIG_BOARD_LATE_INIT is not set
# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL_TEXT_BASE=0xfffc0000
# CONFIG_CMDLINE_EDITING is not set
# CONFIG_AUTO_COMPLETE is not set
# CONFIG_SYS_LONGHELP is not set
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL_TEXT_BASE=0xfffc0000
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL_TEXT_BASE=0xfffc0000
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL_TEXT_BASE=0xfffc0000
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL_TEXT_BASE=0xfffc0000
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_SPL_LOAD_FIT=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_SPL_TEXT_BASE=0xfffc0000
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_SPL_LOAD_FIT=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_SPL_TEXT_BASE=0xfffc0000
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL_TEXT_BASE=0xfffc0000
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_SPL_LOAD_FIT=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_SPL_TEXT_BASE=0xfffc0000
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_SPL_LOAD_FIT=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_SPL_TEXT_BASE=0xfffc0000
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL_TEXT_BASE=0xfffc0000
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_SPL_LOAD_FIT=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_SPL_TEXT_BASE=0xfffc0000
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_SPL_LOAD_FIT=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_SPL_TEXT_BASE=0xfffc0000
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_SPL_LOAD_FIT=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_SPL_TEXT_BASE=0xfffc0000
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL_TEXT_BASE=0xfffc0000
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL_TEXT_BASE=0xfffc0000
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL_TEXT_BASE=0xfffc0000
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL_TEXT_BASE=0xfffc0000
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAM_DEVICE=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_BOUNCE_BUFFER=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_FS_EXT4=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_DEFAULT_FDT_FILE="imx6q-zc5202.dtb"
CONFIG_BOUNCE_BUFFER=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_FS_EXT4=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_DEFAULT_FDT_FILE="imx6q-zc5601.dtb"
CONFIG_BOUNCE_BUFFER=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_FS_EXT4=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
#else
#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_TEXT_BASE 0xFFFD8000
#define CONFIG_SPL_PAD_TO 0x40000
#define CONFIG_SPL_MAX_SIZE 0x28000
#define RESET_VECTOR_OFFSET 0x27FFC
#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
-#define CONFIG_SPL_TEXT_BASE 0xFFFFE000
#define CONFIG_SPL_MAX_SIZE 8192
#define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000
#define CONFIG_SPL_RELOC_STACK 0x00100000
#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
-#define CONFIG_SPL_TEXT_BASE 0xFFFFE000
#define CONFIG_SPL_MAX_SIZE 8192
#define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000
#define CONFIG_SPL_RELOC_STACK 0x00100000
#define CONFIG_SPL_INIT_MINIMAL
#define CONFIG_SPL_NAND_MINIMAL
#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_TEXT_BASE 0xff800000
#define CONFIG_SPL_MAX_SIZE 8192
#define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10)
#define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000
#ifdef CONFIG_SDCARD
#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
-#define CONFIG_SPL_TEXT_BASE 0xD0001000
#define CONFIG_SPL_PAD_TO 0x18000
#define CONFIG_SPL_MAX_SIZE (96 * 1024)
#define CONFIG_SYS_MMC_U_BOOT_SIZE (512 << 10)
#define CONFIG_SPL_SPI_FLASH_MINIMAL
#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
-#define CONFIG_SPL_TEXT_BASE 0xD0001000
#define CONFIG_SPL_PAD_TO 0x18000
#define CONFIG_SPL_MAX_SIZE (96 * 1024)
#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (512 << 10)
#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
-#define CONFIG_SPL_TEXT_BASE 0xFFFFE000
#define CONFIG_SPL_MAX_SIZE 8192
#define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000
#define CONFIG_SPL_RELOC_STACK 0x00100000
#define CONFIG_SPL_INIT_MINIMAL
#define CONFIG_SPL_NAND_MINIMAL
#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_TEXT_BASE 0xff800000
#define CONFIG_SPL_MAX_SIZE 8192
#define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10)
#define CONFIG_SYS_NAND_U_BOOT_DST 0xD0000000
#ifdef CONFIG_SDCARD
#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
-#define CONFIG_SPL_TEXT_BASE 0xf8f81000
#define CONFIG_SPL_PAD_TO 0x20000
#define CONFIG_SPL_MAX_SIZE (128 * 1024)
#define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10)
#define CONFIG_SPL_SPI_FLASH_MINIMAL
#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
-#define CONFIG_SPL_TEXT_BASE 0xf8f81000
#define CONFIG_SPL_PAD_TO 0x20000
#define CONFIG_SPL_MAX_SIZE (128 * 1024)
#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10)
#elif defined(CONFIG_SPL_BUILD)
#define CONFIG_SPL_INIT_MINIMAL
#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_TEXT_BASE 0xff800000
#define CONFIG_SPL_MAX_SIZE 4096
#define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10)
#define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000
#ifdef CONFIG_RAMBOOT_PBL
#define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xqds/t1024_pbi.cfg
#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_TEXT_BASE 0xFFFD8000
#define CONFIG_SPL_PAD_TO 0x40000
#define CONFIG_SPL_MAX_SIZE 0x28000
#define RESET_VECTOR_OFFSET 0x27FFC
#ifdef CONFIG_RAMBOOT_PBL
#define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xrdb/t1024_pbi.cfg
#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_TEXT_BASE 0xFFFD8000
#define CONFIG_SPL_PAD_TO 0x40000
#define CONFIG_SPL_MAX_SIZE 0x28000
#define RESET_VECTOR_OFFSET 0x27FFC
#endif
#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_TEXT_BASE 0xFFFD8000
#define CONFIG_SPL_PAD_TO 0x40000
#define CONFIG_SPL_MAX_SIZE 0x28000
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xqds/t208x_pbi.cfg
#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_TEXT_BASE 0xFFFD8000
#define CONFIG_SPL_PAD_TO 0x40000
#define CONFIG_SPL_MAX_SIZE 0x28000
#define RESET_VECTOR_OFFSET 0x27FFC
#define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xrdb/t2080_pbi.cfg
#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_TEXT_BASE 0xFFFD8000
#define CONFIG_SPL_PAD_TO 0x40000
#define CONFIG_SPL_MAX_SIZE 0x28000
#define RESET_VECTOR_OFFSET 0x27FFC
#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
#else
#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_TEXT_BASE 0xFFFD8000
#define CONFIG_SPL_PAD_TO 0x40000
#define CONFIG_SPL_MAX_SIZE 0x28000
#define RESET_VECTOR_OFFSET 0x27FFC
#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
#else
#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_TEXT_BASE 0xFFFD8000
#define CONFIG_SPL_PAD_TO 0x40000
#define CONFIG_SPL_MAX_SIZE 0x28000
#define RESET_VECTOR_OFFSET 0x27FFC
"usb_pgood_delay=2000\0"
/* SPL support */
-#define CONFIG_SPL_TEXT_BASE 0xe6300000
#define CONFIG_SPL_STACK 0xe6340000
#define CONFIG_SPL_MAX_SIZE 0x4000
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x140000
GENERATED_GBL_DATA_SIZE)
/* Defines for SPL */
-#define CONFIG_SPL_TEXT_BASE 0x40200800
#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)
#define CONFIG_ENV_ADDR 0x260000
/* Defines for SPL */
-#undef CONFIG_SPL_TEXT_BASE
-#define CONFIG_SPL_TEXT_BASE 0x40200000
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#define CONFIG_POWER_TPS62362
/* SPL defines. */
-#define CONFIG_SPL_TEXT_BASE CONFIG_ISW_ENTRY_ADDR
#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \
(128 << 20))
#define CONFIG_SYS_SDRAM_BASE1 0x880000000
/* SPL Loader Configuration */
-#ifdef CONFIG_TARGET_AM654_A53_EVM
-#define CONFIG_SPL_TEXT_BASE 0x80080000
-#else
-#define CONFIG_SPL_TEXT_BASE 0x41c00000
-#endif
#ifdef CONFIG_SYS_K3_SPL_ATF
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "tispl.bin"
*/
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_MAX_SIZE 2048
-#define CONFIG_SPL_TEXT_BASE 0xA0000000
/* NAND boot config */
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
/* Defines for SPL */
-#define CONFIG_SPL_TEXT_BASE 0x300000
#define CONFIG_SPL_MAX_SIZE 0x010000
#define CONFIG_SPL_STACK 0x310000
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
/* SPL */
-#define CONFIG_SPL_TEXT_BASE 0x300000
#define CONFIG_SPL_MAX_SIZE 0x6000
#define CONFIG_SPL_STACK 0x308000
#define CONFIG_SYS_MALLOC_LEN (512 * 1024 + 0x1000)
/* SPL */
-#define CONFIG_SPL_TEXT_BASE 0x300000
#define CONFIG_SPL_MAX_SIZE 0x6000
#define CONFIG_SPL_STACK 0x308000
* Y-MODEM to load u-boot.img, when booted over UART. We must also include
* the scratch space that U-Boot uses in SRAM.
*/
-#define CONFIG_SPL_TEXT_BASE 0x402F0400
#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)
#define CONFIG_ENV_SECT_SIZE 0x1000
#define CONFIG_ENV_OFFSET 0x003f8000
-#define CONFIG_SPL_TEXT_BASE 0xfffd0000
-
#define BOOT_DEVICE_SPI 10
#define CONFIG_SPL_BOARD_LOAD_IMAGE
/* SPL */
#define CONFIG_SPL_STACK 0xf4008000 /* only max. 2KB spare! */
-#define CONFIG_SPL_TEXT_BASE 0xf4000a00
#define CONFIG_SPL_MAX_SIZE ((14 * 1024) - 0xa00)
#define CONFIG_SPL_BSS_START_ADDR 0xf4004000
/* Defines for SPL */
#define CONFIG_SPL_SIZE (140 << 10)
-#define CONFIG_SPL_TEXT_BASE 0x40000030
#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x0030)
#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE)
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
-#define CONFIG_SPL_TEXT_BASE 0x40200800
#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)
"fi;"
/* SPL defines. */
-#define CONFIG_SPL_TEXT_BASE 0x40300350
#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + (128 << 20))
#define CONFIG_SYS_SPI_U_BOOT_OFFS (256 * 1024)
#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
#define CONFIG_SPL_SIZE (160 << 10)
#if defined(CONFIG_SECURED_MODE_IMAGE)
-#define CONFIG_SPL_TEXT_BASE 0x40002614
#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x2614)
#else
-#define CONFIG_SPL_TEXT_BASE 0x40000030
#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x30)
#endif
SZ_4M, 0x1000)
/* Defines for SPL */
-#define CONFIG_SPL_TEXT_BASE 0x300000
#define CONFIG_SPL_MAX_SIZE (12 * SZ_1K)
#define CONFIG_SPL_STACK (SZ_16K)
CONFIG_SYS_MALLOC_LEN)
#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN
#define CONFIG_SPL_STACK 0x8001ff00
-#define CONFIG_SPL_TEXT_BASE 0x80000000
#define CONFIG_SPL_MAX_FOOTPRINT 32768
#define CONFIG_SPL_PAD_TO 32768
#endif
/* SPL */
/* Defines for SPL */
-#define CONFIG_SPL_TEXT_BASE 0x40004030
#define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030)
#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10))
/* Defines for SPL */
#define CONFIG_SPL_SIZE (140 << 10)
-#define CONFIG_SPL_TEXT_BASE 0x40000030
#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x0030)
#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE)
/* Defines for SPL */
#define CONFIG_SPL_SIZE (140 << 10)
-#define CONFIG_SPL_TEXT_BASE 0x40000030
#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x0030)
#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE)
/* SPL */
/* Defines for SPL */
-#define CONFIG_SPL_TEXT_BASE 0x40004030
#define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030)
#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10))
* SPL specific defines
*/
/* SPL will be executed at offset 0 */
-#define CONFIG_SPL_TEXT_BASE 0x00000000
/* SPL will use SRAM as stack */
#define CONFIG_SPL_STACK 0x0000FFF8
/* Defines for SPL */
-#undef CONFIG_SPL_TEXT_BASE
-#define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/
-
/* NAND boot config */
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_COUNT 64
/* SPL */
/* Defines for SPL */
-#define CONFIG_SPL_TEXT_BASE 0x40004030
#define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030)
#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10))
* SPL
*/
-#define CONFIG_SPL_TEXT_BASE 0xffff0000
#define CONFIG_SPL_MAX_SIZE 0x0000fff0
#define CONFIG_SPL_STACK 0x00020000
#define CONFIG_SPL_BSS_START_ADDR 0x00020000
#define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024)
-#define CONFIG_SPL_TEXT_BASE 0x02023400
-
#define CONFIG_IRAM_STACK 0x02050000
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_STACK
#define CONFIG_VAR_SIZE_SPL
-#ifdef CONFIG_VAR_SIZE_SPL
-#define CONFIG_SPL_TEXT_BASE 0x02024410
-#else
-#define CONFIG_SPL_TEXT_BASE 0x02024400
-#endif
#define CONFIG_IRAM_TOP 0x02074000
#define CONFIG_SPL_MAX_FOOTPRINT (30 * 1024)
#define CONFIG_ENV_SIZE (64 << 10)
/* SPL */
-#define CONFIG_SPL_TEXT_BASE 0x300000
#define CONFIG_SPL_MAX_SIZE 0x7000
#define CONFIG_SPL_STACK 0x308000
"bootm_size=0x10000000\0"
/* SPL support */
-#define CONFIG_SPL_TEXT_BASE 0xe6300000
#define CONFIG_SPL_STACK 0xe6340000
#define CONFIG_SPL_MAX_SIZE 0x4000
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x140000
/* Defines for SPL */
#define CONFIG_SPL_SIZE (140 << 10)
-#define CONFIG_SPL_TEXT_BASE 0x40000030
#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x0030)
#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE)
* and some padding thus 'our' max size is really 0x00908000 - 0x00918000
* or 64KB
*/
-#define CONFIG_SPL_TEXT_BASE 0x00908000
#define CONFIG_SPL_MAX_SIZE 0x10000
#define CONFIG_SPL_STACK 0x0091FFB8
/*
* and some padding thus 'our' max size is really 0x00946BB8 - 0x00911000.
* 64KB is more then enough for the SPL.
*/
-#define CONFIG_SPL_TEXT_BASE 0x00911000
#define CONFIG_SPL_MAX_SIZE 0x10000
#define CONFIG_SPL_STACK 0x00946BB8
/*
#define CONFIG_CSF_SIZE 0x2000 /* 8K region */
#endif
-#define CONFIG_SPL_TEXT_BASE 0x7E1000
#define CONFIG_SPL_MAX_SIZE (124 * 1024)
#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
#include <asm/arch/imx-regs.h>
#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_TEXT_BASE 0x0
#define CONFIG_SPL_MAX_SIZE (124 * 1024)
#define CONFIG_SYS_MONITOR_LEN (1024 * 1024)
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
CONFIG_SYS_MALLOC_LEN)
#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN
#define CONFIG_SPL_STACK 0x8001ff00
-#define CONFIG_SPL_TEXT_BASE 0x80000000
#define CONFIG_SPL_MAX_SIZE 0x20000
#define CONFIG_SPL_MAX_FOOTPRINT 32768
* SPL
*/
-#define CONFIG_SPL_TEXT_BASE 0x40300000
#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)
#define CONFIG_SPL_BSS_START_ADDR 0x80000000
"bootm_size=0x10000000\0"
/* SPL support */
-#define CONFIG_SPL_TEXT_BASE 0xe6300000
#define CONFIG_SPL_STACK 0xe6340000
#define CONFIG_SPL_MAX_SIZE 0x4000
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x140000
"bootm_size=0x10000000\0"
/* SPL support */
-#define CONFIG_SPL_TEXT_BASE 0xe6300000
#define CONFIG_SPL_STACK 0xe6340000
#define CONFIG_SPL_MAX_SIZE 0x4000
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x140000
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8
-#define CONFIG_SPL_TEXT_BASE 0x10000000
#define CONFIG_SPL_MAX_SIZE 0x1a000
#define CONFIG_SPL_STACK 0x1001d000
#define CONFIG_SPL_PAD_TO 0x1c000
board/freescale/ls1021aqds/ls102xa_rcw_sd_ifc.cfg
#endif
-#define CONFIG_SPL_TEXT_BASE 0x10000000
#define CONFIG_SPL_MAX_SIZE 0x1a000
#define CONFIG_SPL_STACK 0x1001d000
#define CONFIG_SPL_PAD_TO 0x1c000
#ifdef CONFIG_NAND_BOOT
#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg
-#define CONFIG_SPL_TEXT_BASE 0x10000000
#define CONFIG_SPL_MAX_SIZE 0x1a000
#define CONFIG_SPL_STACK 0x1001d000
#define CONFIG_SPL_PAD_TO 0x1c000
#define CONFIG_U_BOOT_HDR_SIZE (16 << 10)
#endif /* ifdef CONFIG_SECURE_BOOT */
-#define CONFIG_SPL_TEXT_BASE 0x10000000
#define CONFIG_SPL_MAX_SIZE 0x1a000
#define CONFIG_SPL_STACK 0x1001d000
#define CONFIG_SPL_PAD_TO 0x1c000
/* SD boot SPL */
#ifdef CONFIG_SD_BOOT
-#define CONFIG_SPL_TEXT_BASE 0x10000000
#define CONFIG_SPL_MAX_SIZE 0x17000
#define CONFIG_SPL_STACK 0x1001e000
#define CONFIG_SPL_PAD_TO 0x1d000
/* NAND SPL */
#ifdef CONFIG_NAND_BOOT
#define CONFIG_SPL_PBL_PAD
-#define CONFIG_SPL_TEXT_BASE 0x10000000
#define CONFIG_SPL_MAX_SIZE 0x1a000
#define CONFIG_SPL_STACK 0x1001d000
#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
/* SD boot SPL */
#ifdef CONFIG_SD_BOOT
-#define CONFIG_SPL_TEXT_BASE 0x10000000
#define CONFIG_SPL_MAX_SIZE 0x1f000 /* 124 KiB */
#define CONFIG_SPL_STACK 0x10020000
#define CONFIG_SPL_PAD_TO 0x21000 /* 132 KiB */
#if defined(CONFIG_QSPI_BOOT) && defined(CONFIG_SPL)
#define CONFIG_SPL_TARGET "spl/u-boot-spl.pbl"
-#define CONFIG_SPL_TEXT_BASE 0x10000000
#define CONFIG_SPL_MAX_SIZE 0x1f000
#define CONFIG_SPL_STACK 0x10020000
#define CONFIG_SPL_PAD_TO 0x20000
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
-#define CONFIG_SPL_TEXT_BASE 0x10000000
#define CONFIG_SPL_MAX_SIZE 0x17000 /* 90 KiB */
#define CONFIG_SPL_STACK 0x1001f000
#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
#define CONFIG_SPL_MAX_SIZE 0x16000
#define CONFIG_SPL_STACK (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0)
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
-#define CONFIG_SPL_TEXT_BASE 0x1800a000
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000
#define CONFIG_SYS_SPL_MALLOC_START 0x80200000
#define CONFIG_SPL_MAX_SIZE 0x16000
#define CONFIG_SPL_STACK (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0)
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
-#define CONFIG_SPL_TEXT_BASE 0x1800a000
#ifdef CONFIG_NAND_BOOT
#define CONFIG_SYS_NAND_U_BOOT_DST 0x80400000
* NAND SPL
*/
#define CONFIG_SPL_TARGET "u-boot-with-nand-spl.imx"
-#define CONFIG_SPL_TEXT_BASE 0x70008000
#define CONFIG_SPL_PAD_TO 0x8000
#define CONFIG_SPL_STACK 0x70004000
/* SPL */
/* Defines for SPL */
-#define CONFIG_SPL_TEXT_BASE 0x40004030
#define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030)
#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10))
#define CONFIG_SPL_NAND_DRIVERS
#define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/
#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */
#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
/* Defines for SPL */
#define CONFIG_SPL_STACK 0x106000
-#define CONFIG_SPL_TEXT_BASE 0x201000
#define CONFIG_SPL_MAX_SIZE SZ_64K
#define CONFIG_SPL_MAX_FOOTPRINT SZ_64K
#define CONFIG_SPL_PAD_TO 0x10000
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_MAX_SIZE 2048
-#define CONFIG_SPL_TEXT_BASE 0x87dc0000
-
#ifndef CONFIG_SPL_BUILD
#define CONFIG_SKIP_LOWLEVEL_INIT
#endif
* As for the SPL, we must avoid the first 4 KiB as well, but we load the
* IVT and CST to 0x8000, so we don't need to waste the subsequent 4 KiB.
*/
-#define CONFIG_SPL_TEXT_BASE 0x00001000
/* U-Boot general configuration */
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
* We are only ever GP parts and will utilize all of the "downloaded image"
* area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
*/
-#undef CONFIG_SPL_TEXT_BASE
-#define CONFIG_SPL_TEXT_BASE 0x40200000
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
* We are only ever GP parts and will utilize all of the "downloaded image"
* area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
*/
-#undef CONFIG_SPL_TEXT_BASE
-#define CONFIG_SPL_TEXT_BASE 0x40200000
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
* We are only ever GP parts and will utilize all of the "downloaded image"
* area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
*/
-#undef CONFIG_SPL_TEXT_BASE
-#define CONFIG_SPL_TEXT_BASE 0x40200000
#define CONFIG_REVISION_TAG 1
* area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB) in
* order to allow for BCH8 to fit in.
*/
-#undef CONFIG_SPL_TEXT_BASE
-#define CONFIG_SPL_TEXT_BASE 0x40200000
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS
* We are only ever GP parts and will utilize all of the "downloaded image"
* area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
*/
-#undef CONFIG_SPL_TEXT_BASE
-#define CONFIG_SPL_TEXT_BASE 0x40200000
/* call misc_init_r */
CONFIG_SYS_MALLOC_LEN)
#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN
#define CONFIG_SPL_STACK 0x8001ff00
-#define CONFIG_SPL_TEXT_BASE 0x80000000
#define CONFIG_SPL_MAX_FOOTPRINT 32768
#define CONFIG_SPL_PAD_TO 32768
#endif
/* MMC SPL */
#define COPY_BL2_FNPTR_ADDR 0x02020030
-#define CONFIG_SPL_TEXT_BASE 0x02021410
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x40007000\0" \
#ifdef CONFIG_SDCARD
#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
-#define CONFIG_SPL_TEXT_BASE 0xf8f81000
#define CONFIG_SPL_PAD_TO 0x20000
#define CONFIG_SPL_MAX_SIZE (128 * 1024)
#define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10)
#define CONFIG_SPL_SPI_FLASH_MINIMAL
#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
-#define CONFIG_SPL_TEXT_BASE 0xf8f81000
#define CONFIG_SPL_PAD_TO 0x20000
#define CONFIG_SPL_MAX_SIZE (128 * 1024)
#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10)
#define CONFIG_SPL_INIT_MINIMAL
#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
-#define CONFIG_SPL_TEXT_BASE 0xff800000
#define CONFIG_SPL_MAX_SIZE 4096
#define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10)
#define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000
*
* Tweak the SPL text base address to avoid this.
*/
-#undef CONFIG_SPL_TEXT_BASE
-#define CONFIG_SPL_TEXT_BASE 0x00909000
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M)
#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
/* Defines for SPL */
-#define CONFIG_SPL_TEXT_BASE 0x300000
#define CONFIG_SPL_MAX_SIZE 0x010000
#define CONFIG_SPL_STACK 0x310000
128 * 1024, 0x1000)
/* Defines for SPL */
-#define CONFIG_SPL_TEXT_BASE 0x300000
#define CONFIG_SPL_MAX_SIZE 0x010000
#define CONFIG_SPL_STACK 0x310000
"bootm_size=0x10000000\0"
/* SPL support */
-#define CONFIG_SPL_TEXT_BASE 0xe6300000
#define CONFIG_SPL_STACK 0xe6340000
#define CONFIG_SPL_MAX_SIZE 0x4000
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x140000
/* SPI is not supported */
-#define CONFIG_SPL_TEXT_BASE 0xfffd0000
-
#define BOOT_DEVICE_SPI 10
#define CONFIG_SPL_BOARD_LOAD_IMAGE
#define CONFIG_SYS_INIT_SP_ADDR 0x60100000
#define CONFIG_SYS_LOAD_ADDR 0x60800800
#define CONFIG_SPL_STACK 0x10081fff
-#define CONFIG_SPL_TEXT_BASE 0x10081000
#define CONFIG_ROCKCHIP_MAX_INIT_SIZE (4 << 10)
#define CONFIG_ROCKCHIP_CHIP_TAG "RK30"
#define CONFIG_ROCKCHIP_MAX_INIT_SIZE (0x8000 - 0x800)
#define CONFIG_ROCKCHIP_CHIP_TAG "RK31"
-#define CONFIG_SPL_TEXT_BASE 0x10080800
/* spl size 32kb sram - 2kb bootrom */
#define CONFIG_SPL_MAX_SIZE (0x8000 - 0x800)
#define CONFIG_ROCKCHIP_SERIAL 1
#define CONFIG_SYS_INIT_SP_ADDR 0x60100000
#define CONFIG_SYS_LOAD_ADDR 0x60800800
#define CONFIG_SPL_STACK 0x10088000
-#define CONFIG_SPL_TEXT_BASE 0x10081000
#define CONFIG_ROCKCHIP_MAX_INIT_SIZE (28 << 10)
#define CONFIG_ROCKCHIP_CHIP_TAG "RK32"
#define CONFIG_SYS_INIT_SP_ADDR 0x00100000
#define CONFIG_SYS_LOAD_ADDR 0x00800800
#define CONFIG_SPL_STACK 0xff718000
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_TPL_BOOTROM_SUPPORT)
-# define CONFIG_SPL_TEXT_BASE 0x0
-#else
-# define CONFIG_SPL_TEXT_BASE 0xff704000
-#endif
/* RAW SD card / eMMC locations. */
#define CONFIG_SYS_SPI_U_BOOT_OFFS (128 << 10)
#define CONFIG_SYS_INIT_SP_ADDR 0x00300000
#define CONFIG_SYS_LOAD_ADDR 0x00280000
-#define CONFIG_SPL_TEXT_BASE 0x00000000
#define CONFIG_SPL_MAX_SIZE 0x40000
#define CONFIG_SPL_BSS_START_ADDR 0x400000
#define CONFIG_SPL_BSS_MAX_SIZE 0x20000
#define CONFIG_SYS_INIT_SP_ADDR 0x00300000
#define CONFIG_SYS_LOAD_ADDR 0x00800800
#define CONFIG_SPL_STACK 0xff8effff
-#define CONFIG_SPL_TEXT_BASE 0xff8c2000
#define CONFIG_SPL_MAX_SIZE 0x30000 - 0x2000
/* BSS setup */
#define CONFIG_SPL_BSS_START_ADDR 0xff8e0000
#endif
/* SPL */
-#define CONFIG_SPL_TEXT_BASE 0x200000
#define CONFIG_SPL_MAX_SIZE 0x10000
#define CONFIG_SPL_BSS_START_ADDR 0x20000000
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
#endif
/* SPL */
-#define CONFIG_SPL_TEXT_BASE 0x200000
#define CONFIG_SPL_MAX_SIZE 0x10000
#define CONFIG_SPL_BSS_START_ADDR 0x20000000
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
#endif
/* SPL */
-#define CONFIG_SPL_TEXT_BASE 0x200000
#define CONFIG_SPL_MAX_SIZE 0x10000
#define CONFIG_SPL_BSS_START_ADDR 0x20000000
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
/* SPL */
-#define CONFIG_SPL_TEXT_BASE 0x300000
#define CONFIG_SPL_MAX_SIZE 0x18000
#define CONFIG_SPL_BSS_START_ADDR 0x20000000
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
/* SPL */
-#define CONFIG_SPL_TEXT_BASE 0x300000
#define CONFIG_SPL_MAX_SIZE 0x18000
#define CONFIG_SPL_BSS_START_ADDR 0x20000000
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
#endif
/* SPL */
-#define CONFIG_SPL_TEXT_BASE 0x200000
#define CONFIG_SPL_MAX_SIZE 0x18000
#define CONFIG_SPL_BSS_START_ADDR 0x20000000
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
#endif
/* SPL */
-#define CONFIG_SPL_TEXT_BASE 0x200000
#define CONFIG_SPL_MAX_SIZE 0x18000
#define CONFIG_SPL_BSS_START_ADDR 0x20000000
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
#define CONFIG_SYS_I2C
/* Defines for SPL */
-#define CONFIG_SPL_TEXT_BASE 0x402F0400
#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)
"bootm_size=0x10000000\0"
/* SPL support */
-#define CONFIG_SPL_TEXT_BASE 0xe6300000
#define CONFIG_SPL_STACK 0xe6340000
#define CONFIG_SPL_MAX_SIZE 0x4000
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x140000
#endif
/* Defines for SPL */
-#define CONFIG_SPL_TEXT_BASE 0x0
#define CONFIG_SPL_MAX_SIZE (SZ_4K)
#define CONFIG_SPL_BSS_START_ADDR CONFIG_SYS_SDRAM_BASE
#define CONFIG_SKIP_LOWLEVEL_INIT
#define COPY_BL2_FNPTR_ADDR 0x00002488
-#define CONFIG_SPL_TEXT_BASE 0x02021410
-
#define CONFIG_BOOTCOMMAND "fatload mmc 0 40007000 uImage; bootm 40007000"
/* Miscellaneous configurable options */
* SPL
*/
-#define CONFIG_SPL_TEXT_BASE 0x40200000
#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)
#define CONFIG_SPL_BSS_START_ADDR 0x80000000
* 0xFFE3_FFFF ...... End of SRAM (top)
*/
#ifndef CONFIG_SPL_TEXT_BASE
-#define CONFIG_SPL_TEXT_BASE CONFIG_SYS_INIT_RAM_ADDR
#define CONFIG_SPL_MAX_SIZE CONFIG_SYS_INIT_RAM_SIZE
#endif
*
*/
#define CONFIG_SPL_TARGET "spl/u-boot-spl.hex"
-#define CONFIG_SPL_TEXT_BASE CONFIG_SYS_INIT_RAM_ADDR
#define CONFIG_SPL_MAX_SIZE CONFIG_SYS_INIT_RAM_SIZE
#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */
/* For SPL */
#ifdef CONFIG_SUPPORT_SPL
#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
-#define CONFIG_SPL_TEXT_BASE CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
#define CONFIG_SYS_SPL_LEN 0x00008000
#define CONFIG_SYS_UBOOT_START 0x080083FD
/* SPL support */
#ifdef CONFIG_SPL
/* BOOTROM load address */
-#define CONFIG_SPL_TEXT_BASE 0x2FFC2500
/* SPL use DDR */
#define CONFIG_SPL_BSS_START_ADDR 0xC0200000
#define CONFIG_SPL_BSS_MAX_SIZE 0x00100000
"bootm_size=0x10000000\0"
/* SPL support */
-#define CONFIG_SPL_TEXT_BASE 0xe6300000
#define CONFIG_SPL_STACK 0xe6340000
#define CONFIG_SPL_MAX_SIZE 0x4000
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x140000
* autoconf.mk.
*/
#if CONFIG_SUNXI_SRAM_ADDRESS == 0x10000
-#define CONFIG_SPL_TEXT_BASE 0x10060 /* sram start+header */
#define CONFIG_SPL_MAX_SIZE 0x7fa0 /* 32 KiB */
#ifdef CONFIG_ARM64
/* end of SRAM A2 for now, as SRAM A1 is pretty tight for an ARM64 build */
#define LOW_LEVEL_SRAM_STACK 0x00018000
#endif /* !CONFIG_ARM64 */
#elif CONFIG_SUNXI_SRAM_ADDRESS == 0x20000
-#define CONFIG_SPL_TEXT_BASE 0x20060 /* sram start+header */
#define CONFIG_SPL_MAX_SIZE 0x7fa0 /* 32 KiB */
/* end of SRAM A2 on H6 for now */
#define LOW_LEVEL_SRAM_STACK 0x00118000
#else
-#define CONFIG_SPL_TEXT_BASE 0x60 /* sram start+header */
#define CONFIG_SPL_MAX_SIZE 0x5fa0 /* 24KB on sun4i/sun7i */
#define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */
#endif
#define CONFIG_SPL_NAND_DRIVERS
#define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/
#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)
#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
-#define CONFIG_SPL_TEXT_BASE 0x40200800
#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)
ROUND(3 * CONFIG_ENV_SIZE + SZ_4M, 0x1000)
/* Defines for SPL */
-#define CONFIG_SPL_TEXT_BASE 0x0
#define CONFIG_SPL_MAX_SIZE (31 * SZ_512)
#define CONFIG_SPL_STACK (ATMEL_BASE_SRAM1 + SZ_16K)
#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \
"ramdisk_addr_r=0x83100000\0"
/* Defines for SPL */
-#define CONFIG_SPL_TEXT_BASE 0x80108000
#define CONFIG_SYS_SPL_MALLOC_START 0x80090000
#define CONFIG_SPL_STACK 0x800ffffc
"ramdisk_addr_r=0x83100000\0"
/* Defines for SPL */
-#define CONFIG_SPL_TEXT_BASE 0x80108000
#define CONFIG_SYS_SPL_MALLOC_START 0x80090000
#define CONFIG_SPL_STACK 0x800ffffc
"ramdisk_addr_r=0x03100000\0"
/* Defines for SPL */
-#define CONFIG_SPL_TEXT_BASE 0x00108000
#define CONFIG_SYS_SPL_MALLOC_START 0x00090000
#define CONFIG_SPL_STACK 0x000ffffc
"ramdisk_addr_r=0x83100000\0"
/* Defines for SPL */
-#define CONFIG_SPL_TEXT_BASE 0x80108000
#define CONFIG_SYS_SPL_MALLOC_START 0x80090000
#define CONFIG_SPL_STACK 0x800ffffc
/* SPL */
/* Defines for SPL */
-#define CONFIG_SPL_TEXT_BASE 0x40004030
#define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030)
#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10))
#define CONFIG_ENV_OVERWRITE
/* Defines for SPL */
-#define CONFIG_SPL_TEXT_BASE 0x40300000
#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)
/* SPL */
/* Defines for SPL */
-#define CONFIG_SPL_TEXT_BASE 0x40400000
#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)
* supports X-MODEM loading via UART, and we leverage this and then use
* Y-MODEM to load u-boot.img, when booted over UART.
*/
-#define CONFIG_SPL_TEXT_BASE CONFIG_ISW_ENTRY_ADDR
#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \
(128 << 20))
#endif
/* SPL SPI Loader Configuration */
-#define CONFIG_SPL_TEXT_BASE CONFIG_ISW_ENTRY_ADDR
#define CONFIG_SPL_PAD_TO 65536
#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_PAD_TO - 8)
#define CONFIG_SPL_BSS_START_ADDR (CONFIG_ISW_ENTRY_ADDR + \
#define CONFIG_SYS_MONITOR_LEN (256 << 10)
/* SPL */
-#define CONFIG_SPL_TEXT_BASE 0x40200800
#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \
(64 << 20))
* SPL is overlapped with public stack and breaking non HS devices to boot.
* So moving TEXT_BASE down to non-HS limit.
*/
-#define CONFIG_SPL_TEXT_BASE 0x40300000
#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \
(128 << 20))
* RAM from address 0x40301350 (0x40300000+0x1000(reserved)+0x350(cert)).
*/
#define TI_OMAP5_SECURE_BOOT_RESV_SRAM_SZ 0x1000
-#define CONFIG_SPL_TEXT_BASE CONFIG_ISW_ENTRY_ADDR
/* If no specific start address is specified then the secure EMIF
* region will be placed at the end of the DDR space. In order to prevent
* the main u-boot relocation from clobbering that memory and causing a
* For all booting on GP parts, the flash loader image is
* downloaded into internal RAM at address 0x40300000.
*/
-#define CONFIG_SPL_TEXT_BASE 0x40300000
#endif
#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
-#define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/
#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
CONFIG_SPL_TEXT_BASE)
/* Defines for SPL */
#define CONFIG_SPL_SIZE (140 << 10)
-#define CONFIG_SPL_TEXT_BASE 0x40000030
#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x0030)
#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE)
/* only for SPL */
#if defined(CONFIG_ARCH_UNIPHIER_LD4) || \
defined(CONFIG_ARCH_UNIPHIER_SLD8)
-#define CONFIG_SPL_TEXT_BASE 0x00040000
-#else
-#define CONFIG_SPL_TEXT_BASE 0x00100000
#endif
#define CONFIG_SPL_STACK (0x00200000)
#define CONFIG_SYS_MALLOC_LEN (512 * 1024 + 0x1000)
/* SPL */
-#define CONFIG_SPL_TEXT_BASE 0x300000
#define CONFIG_SPL_MAX_SIZE 0x6000
#define CONFIG_SPL_STACK 0x308000
#define CONFIG_SYS_MALLOC_LEN (2 * 1024 * 1024)
/* SPL */
-#define CONFIG_SPL_TEXT_BASE 0x300000
#define CONFIG_SPL_MAX_SIZE 0x10000
#define CONFIG_SPL_BSS_START_ADDR 0x20000000
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
* SPL
*/
-#define CONFIG_SPL_TEXT_BASE 0x10002300
#define CONFIG_SPL_MAX_SIZE (64 * 1024) /* 8 KB for stack */
#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
*/
/* SPL will be executed at offset 0 */
-#define CONFIG_SPL_TEXT_BASE 0x00000000
/* SPL will use SRAM as stack */
#define CONFIG_SPL_STACK 0x0000FFF8
/* Use the framework and generic lib */
/* Defines for SPL */
#define CONFIG_SPL_SIZE (140 << 10)
-#define CONFIG_SPL_TEXT_BASE 0x40000030
#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x0030)
#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE)
/*
* SPL related defines
*/
-#define CONFIG_SPL_TEXT_BASE 0xd2800b00
#define CONFIG_SPL_MAX_SIZE (CONFIG_SRAM_SIZE - 0xb00)
#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/spear"
"dfu_bufsiz=0x1000\0"
#endif
-#define CONFIG_SPL_TEXT_BASE 0xfffc0000
#define CONFIG_SPL_STACK 0xfffffffc
#define CONFIG_SPL_MAX_SIZE 0x40000
#endif
/* SP location before relocation, must use scratch RAM */
-#define CONFIG_SPL_TEXT_BASE 0x0
/* 3 * 64kB blocks of OCM - one is on the top because of bootrom */
#define CONFIG_SPL_MAX_SIZE 0x30000
CONFIG_SPL_STACK_SIZE
CONFIG_SPL_START_S_PATH
CONFIG_SPL_TARGET
-CONFIG_SPL_TEXT_BASE
CONFIG_SPL_UBI
CONFIG_SPL_UBI_INFO_ADDR
CONFIG_SPL_UBI_LEB_START