Rework for AT91SAM9RL SoC, makes it build again.
Based on the work for AT91SAM9260-EK.
V4: US->USART, cosmetics
Signed-off-by: Hong Xu <hong.xu@atmel.com>
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
*/
#include <common.h>
+#include <asm/io.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
+
+/*
+ * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all
+ * peripheral pins. Good to have if hardware is soldered optionally
+ * or in case of SPI no slave is selected. Avoid lines to float
+ * needlessly. Use a short local PUP define.
+ *
+ * Due to errata "TXD floats when CTS is inactive" pullups are always
+ * on for TXD pins.
+ */
+#ifdef CONFIG_AT91_GPIO_PULLUP
+# define PUP CONFIG_AT91_GPIO_PULLUP
+#else
+# define PUP 0
+#endif
void at91_serial0_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTA, 6, 1); /* TXD0 */
- at91_set_a_periph(AT91_PIO_PORTA, 7, 0); /* RXD0 */
- writel(1 << AT91SAM9RL_ID_US0, &pmc->pcer);
+ at91_set_a_periph(AT91_PIO_PORTA, 7, PUP); /* RXD0 */
+ writel(1 << ATMEL_ID_USART0, &pmc->pcer);
}
void at91_serial1_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTA, 11, 1); /* TXD1 */
- at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* RXD1 */
- writel(1 << AT91SAM9RL_ID_US1, &pmc->pcer);
+ at91_set_a_periph(AT91_PIO_PORTA, 12, PUP); /* RXD1 */
+ writel(1 << ATMEL_ID_USART1, &pmc->pcer);
}
void at91_serial2_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTA, 13, 1); /* TXD2 */
- at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* RXD2 */
- writel(1 << AT91SAM9RL_ID_US2, &pmc->pcer);
+ at91_set_a_periph(AT91_PIO_PORTA, 14, PUP); /* RXD2 */
+ writel(1 << ATMEL_ID_USART2, &pmc->pcer);
}
-void at91_serial3_hw_init(void)
+void at91_seriald_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
- at91_set_a_periph(AT91_PIO_PORTA, 21, 0); /* DRXD */
+ at91_set_a_periph(AT91_PIO_PORTA, 21, PUP); /* DRXD */
at91_set_a_periph(AT91_PIO_PORTA, 22, 1); /* DTXD */
- writel(1 << AT91_ID_SYS, &pmc->pcer);
-}
-
-void at91_serial_hw_init(void)
-{
-#ifdef CONFIG_USART0
- at91_serial0_hw_init();
-#endif
-
-#ifdef CONFIG_USART1
- at91_serial1_hw_init();
-#endif
-
-#ifdef CONFIG_USART2
- at91_serial2_hw_init();
-#endif
-
-#ifdef CONFIG_USART3 /* DBGU */
- at91_serial3_hw_init();
-#endif
+ writel(1 << ATMEL_ID_SYS, &pmc->pcer);
}
-#ifdef CONFIG_HAS_DATAFLASH
+#if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI)
void at91_spi0_hw_init(unsigned long cs_mask)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
- at91_set_a_periph(AT91_PIO_PORTA, 25, 0); /* SPI0_MISO */
- at91_set_a_periph(AT91_PIO_PORTA, 26, 0); /* SPI0_MOSI */
- at91_set_a_periph(AT91_PIO_PORTA, 27, 0); /* SPI0_SPCK */
+ at91_set_a_periph(AT91_PIO_PORTA, 25, PUP); /* SPI0_MISO */
+ at91_set_a_periph(AT91_PIO_PORTA, 26, PUP); /* SPI0_MOSI */
+ at91_set_a_periph(AT91_PIO_PORTA, 27, PUP); /* SPI0_SPCK */
/* Enable clock */
- writel(1 << AT91SAM9RL_ID_SPI, &pmc->pcer);
+ writel(1 << ATMEL_ID_SPI, &pmc->pcer);
if (cs_mask & (1 << 0)) {
at91_set_a_periph(AT91_PIO_PORTA, 28, 1);
#define AT91SAM9RL_H
/*
- * Peripheral identifiers/interrupts.
+ * defines to be used in other places
*/
-#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS 1 /* System Controller */
-#define AT91SAM9RL_ID_PIOA 2 /* Parallel IO Controller A */
-#define AT91SAM9RL_ID_PIOB 3 /* Parallel IO Controller B */
-#define AT91SAM9RL_ID_PIOC 4 /* Parallel IO Controller C */
-#define AT91SAM9RL_ID_PIOD 5 /* Parallel IO Controller D */
-#define AT91SAM9RL_ID_US0 6 /* USART 0 */
-#define AT91SAM9RL_ID_US1 7 /* USART 1 */
-#define AT91SAM9RL_ID_US2 8 /* USART 2 */
-#define AT91SAM9RL_ID_US3 9 /* USART 3 */
-#define AT91SAM9RL_ID_MCI 10 /* Multimedia Card Interface */
-#define AT91SAM9RL_ID_TWI0 11 /* TWI 0 */
-#define AT91SAM9RL_ID_TWI1 12 /* TWI 1 */
-#define AT91SAM9RL_ID_SPI 13 /* Serial Peripheral Interface */
-#define AT91SAM9RL_ID_SSC0 14 /* Serial Synchronous Controller 0 */
-#define AT91SAM9RL_ID_SSC1 15 /* Serial Synchronous Controller 1 */
-#define AT91SAM9RL_ID_TC0 16 /* Timer Counter 0 */
-#define AT91SAM9RL_ID_TC1 17 /* Timer Counter 1 */
-#define AT91SAM9RL_ID_TC2 18 /* Timer Counter 2 */
-#define AT91SAM9RL_ID_PWMC 19 /* Pulse Width Modulation Controller */
-#define AT91SAM9RL_ID_TSC 20 /* Touch Screen Controller */
-#define AT91SAM9RL_ID_DMA 21 /* DMA Controller */
-#define AT91SAM9RL_ID_UDPHS 22 /* USB Device HS */
-#define AT91SAM9RL_ID_LCDC 23 /* LCD Controller */
-#define AT91SAM9RL_ID_AC97C 24 /* AC97 Controller */
-#define AT91SAM9RL_ID_IRQ0 31 /* Advanced Interrupt Controller (IRQ0) */
-
-#define AT91_SDRAMC_BASE 0xffffea00
-#define AT91_SMC_BASE 0xffffec00
-#define AT91_MATRIX_BASE 0xffffee00
-#define AT91_PIO_BASE 0xfffff400
-#define AT91_PMC_BASE 0xfffffc00
-#define AT91_RSTC_BASE 0xfffffd00
-#define AT91_PIT_BASE 0xfffffd30
-#define AT91_WDT_BASE 0xfffffd40
+#define CONFIG_ARM926EJS /* ARM926EJS Core */
+#define CONFIG_AT91FAMILY /* it's a member of AT91 */
-#ifdef CONFIG_AT91_LEGACY
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define ATMEL_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define ATMEL_ID_SYS 1 /* System Peripherals */
+#define ATMEL_ID_PIOA 2 /* Parallel IO Controller A */
+#define ATMEL_ID_PIOB 3 /* Parallel IO Controller B */
+#define ATMEL_ID_PIOC 4 /* Parallel IO Controller C */
+#define ATMEL_ID_PIOD 5 /* Parallel IO Controller D */
+#define ATMEL_ID_USART0 6 /* USART 0 */
+#define ATMEL_ID_USART1 7 /* USART 1 */
+#define ATMEL_ID_USART2 8 /* USART 2 */
+#define ATMEL_ID_USART3 9 /* USART 3 */
+#define ATMEL_ID_MCI 10 /* Multimedia Card Interface */
+#define ATMEL_ID_TWI0 11 /* TWI 0 */
+#define ATMEL_ID_TWI1 12 /* TWI 1 */
+#define ATMEL_ID_SPI 13 /* Serial Peripheral Interface */
+#define ATMEL_ID_SSC0 14 /* Serial Synchronous Controller 0 */
+#define ATMEL_ID_SSC1 15 /* Serial Synchronous Controller 1 */
+#define ATMEL_ID_TC0 16 /* Timer Counter 0 */
+#define ATMEL_ID_TC1 17 /* Timer Counter 1 */
+#define ATMEL_ID_TC2 18 /* Timer Counter 2 */
+#define ATMEL_ID_PWMC 19 /* Pulse Width Modulation Controller */
+#define ATMEL_ID_TSC 20 /* Touch Screen Controller */
+#define ATMEL_ID_DMA 21 /* DMA Controller */
+#define ATMEL_ID_UDPHS 22 /* USB Device HS */
+#define ATMEL_ID_LCDC 23 /* LCD Controller */
+#define ATMEL_ID_AC97C 24 /* AC97 Controller */
+#define ATMEL_ID_IRQ0 31 /* Advanced Interrupt Controller (IRQ0) */
/*
* User Peripheral physical base addresses.
*/
-#define AT91SAM9RL_BASE_TCB0 0xfffa0000
-#define AT91SAM9RL_BASE_TC0 0xfffa0000
-#define AT91SAM9RL_BASE_TC1 0xfffa0040
-#define AT91SAM9RL_BASE_TC2 0xfffa0080
-#define AT91SAM9RL_BASE_MCI 0xfffa4000
-#define AT91SAM9RL_BASE_TWI0 0xfffa8000
-#define AT91SAM9RL_BASE_TWI1 0xfffac000
-#define AT91SAM9RL_BASE_US0 0xfffb0000
-#define AT91SAM9RL_BASE_US1 0xfffb4000
-#define AT91SAM9RL_BASE_US2 0xfffb8000
-#define AT91SAM9RL_BASE_US3 0xfffbc000
-#define AT91SAM9RL_BASE_SSC0 0xfffc0000
-#define AT91SAM9RL_BASE_SSC1 0xfffc4000
-#define AT91SAM9RL_BASE_PWMC 0xfffc8000
-#define AT91SAM9RL_BASE_SPI 0xfffcc000
-#define AT91SAM9RL_BASE_TSC 0xfffd0000
-#define AT91SAM9RL_BASE_UDPHS 0xfffd4000
-#define AT91SAM9RL_BASE_AC97C 0xfffd8000
-#define AT91_BASE_SYS 0xffffc000
+#define ATMEL_BASE_TCB0 0xfffa0000
+#define ATMEL_BASE_TC0 0xfffa0000
+#define ATMEL_BASE_TC1 0xfffa0040
+#define ATMEL_BASE_TC2 0xfffa0080
+#define ATMEL_BASE_MCI 0xfffa4000
+#define ATMEL_BASE_TWI0 0xfffa8000
+#define ATMEL_BASE_TWI1 0xfffac000
+#define ATMEL_BASE_USART0 0xfffb0000
+#define ATMEL_BASE_USART1 0xfffb4000
+#define ATMEL_BASE_USART2 0xfffb8000
+#define ATMEL_BASE_USART3 0xfffbc000
+#define ATMEL_BASE_SSC0 0xfffc0000
+#define ATMEL_BASE_SSC1 0xfffc4000
+#define ATMEL_BASE_PWMC 0xfffc8000
+#define ATMEL_BASE_SPI0 0xfffcc000
+#define ATMEL_BASE_TSC 0xfffd0000
+#define ATMEL_BASE_UDPHS 0xfffd4000
+#define ATMEL_BASE_AC97C 0xfffd8000
+#define ATMEL_BASE_SYS 0xffffc000
/*
- * System Peripherals (offset from AT91_BASE_SYS)
+ * System Peripherals
*/
-#define AT91_DMA (0xffffe600 - AT91_BASE_SYS)
-#define AT91_ECC (0xffffe800 - AT91_BASE_SYS)
-#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS)
-#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
-#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
-#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS)
-#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
-#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS)
-#define AT91_PIOD (0xfffffa00 - AT91_BASE_SYS)
-#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
-#define AT91_SCKCR (0xfffffd50 - AT91_BASE_SYS)
-#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
-#define AT91_RTC (0xfffffe00 - AT91_BASE_SYS)
-
-#define AT91_USART0 AT91SAM9RL_BASE_US0
-#define AT91_USART1 AT91SAM9RL_BASE_US1
-#define AT91_USART2 AT91SAM9RL_BASE_US2
-#define AT91_USART3 AT91SAM9RL_BASE_US3
-
-#endif /* CONFIG_AT91_LEGACY */
+#define ATMEL_BASE_DMA 0xffffe600
+#define ATMEL_BASE_ECC 0xffffe800
+#define ATMEL_BASE_SDRAMC 0xffffea00
+#define ATMEL_BASE_SMC 0xffffec00
+#define ATMEL_BASE_MATRIX 0xffffee00
+#define ATMEL_BASE_CCFG 0xffffef10
+#define ATMEL_BASE_AIC 0xfffff000
+#define ATMEL_BASE_DBGU 0xfffff200
+#define ATMEL_BASE_PIOA 0xfffff400
+#define ATMEL_BASE_PIOB 0xfffff600
+#define ATMEL_BASE_PIOC 0xfffff800
+#define ATMEL_BASE_PIOD 0xfffffa00
+#define ATMEL_BASE_PMC 0xfffffc00
+#define ATMEL_BASE_RSTC 0xfffffd00
+#define ATMEL_BASE_SHDWC 0xfffffd10
+#define ATMEL_BASE_RTT 0xfffffd20
+#define ATMEL_BASE_PIT 0xfffffd30
+#define ATMEL_BASE_WDT 0xfffffd40
+#define ATMEL_BASE_SCKCR 0xfffffd50
+#define ATMEL_BASE_GPBR 0xfffffd60
+#define ATMEL_BASE_RTC 0xfffffe00
/*
* Internal Memory.
*/
-#define AT91SAM9RL_SRAM_BASE 0x00300000 /* Internal SRAM base address */
-#define AT91SAM9RL_SRAM_SIZE SZ_16K /* Internal SRAM size (16Kb) */
+#define ATMEL_BASE_SRAM 0x00300000 /* Internal SRAM base address */
+#define ATMEL_BASE_ROM 0x00400000 /* Internal ROM base address */
+
+#define ATMEL_BASE_LCDC 0x00500000 /* LCD Controller */
+#define ATMEL_UHP_BASE 0x00600000 /* USB Device HS controller */
-#define AT91SAM9RL_ROM_BASE 0x00400000 /* Internal ROM base address */
-#define AT91SAM9RL_ROM_SIZE (2 * SZ_16K) /* Internal ROM size (32Kb) */
+/*
+ * External memory
+ */
+#define ATMEL_BASE_CS0 0x10000000
+#define ATMEL_BASE_CS1 0x20000000 /* SDRAM */
+#define ATMEL_BASE_CS2 0x30000000
+#define ATMEL_BASE_CS3 0x40000000 /* NAND */
+#define ATMEL_BASE_CS4 0x50000000 /* Compact Flash Slot 0 */
+#define ATMEL_BASE_CS5 0x60000000 /* Compact Flash Slot 1 */
-#define AT91SAM9RL_LCDC_BASE 0x00500000 /* LCD Controller */
-#define AT91SAM9RL_UDPHS_BASE 0x00600000 /* USB Device HS controller */
+/*
+ * Other misc defines
+ */
+#define ATMEL_PIO_PORTS 4 /* this SoC has 4 PIO */
+#define ATMEL_BASE_PIO ATMEL_BASE_PIOA
/*
* Cpu Name
*/
-#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9RL"
+#define ATMEL_CPU_NAME "AT91SAM9RL"
#endif
#ifndef AT91SAM9RL_MATRIX_H
#define AT91SAM9RL_MATRIX_H
-#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
-#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
-#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
-#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
-#define AT91_MATRIX_ULBT_FOUR (2 << 0)
-#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
-#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
-
-#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
-#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
-#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
-#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
-#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
-#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
-#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
-#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
-
-#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
-#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
-#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
-#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
-#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
-#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
-#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
-
-#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
-#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-#define AT91_MATRIX_RCB2 (1 << 2)
-#define AT91_MATRIX_RCB3 (1 << 3)
-#define AT91_MATRIX_RCB4 (1 << 4)
-#define AT91_MATRIX_RCB5 (1 << 5)
-
-#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x114) /* TCM Configuration Register */
-#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
-#define AT91_MATRIX_ITCM_0 (0 << 0)
-#define AT91_MATRIX_ITCM_16 (5 << 0)
-#define AT91_MATRIX_ITCM_32 (6 << 0)
-#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
-#define AT91_MATRIX_DTCM_0 (0 << 4)
-#define AT91_MATRIX_DTCM_16 (5 << 4)
-#define AT91_MATRIX_DTCM_32 (6 << 4)
-
-#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI0 Chip Select Assignment Register */
-#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
-#define AT91_MATRIX_CS1A_SMC (0 << 1)
-#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
-#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
-#define AT91_MATRIX_CS3A_SMC (0 << 3)
-#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
-#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
-#define AT91_MATRIX_CS4A_SMC (0 << 4)
-#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
-#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
-#define AT91_MATRIX_CS5A_SMC (0 << 5)
-#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
-#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */
-#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16)
-#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16)
-
+#ifndef __ASSEMBLY__
+
+struct at91_matrix {
+ u32 mcfg[16]; /* Master Configuration Registers */
+ u32 scfg[16]; /* Slave Configuration Registers */
+ u32 pras[16][2]; /* Priority Assignment Slave Registers */
+ u32 mrcr; /* Master Remap Control Register */
+ u32 filler[7];
+ u32 ebicsa; /* EBI Chip Select Assignment Register */
+};
+
+#endif /* __ASSEMBLY__ */
+
+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
+
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR_SHIFT 18
+#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
+#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
+
+#define AT91_MATRIX_M0PR_SHIFT 0
+#define AT91_MATRIX_M1PR_SHIFT 4
+#define AT91_MATRIX_M2PR_SHIFT 8
+#define AT91_MATRIX_M3PR_SHIFT 12
+#define AT91_MATRIX_M4PR_SHIFT 16
+#define AT91_MATRIX_M5PR_SHIFT 20
+
+#define AT91_MATRIX_RCB0 (1 << 0)
+#define AT91_MATRIX_RCB1 (1 << 1)
+
+#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
+#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
+#define AT91_MATRIX_DBPUC (1 << 8)
+#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16)
#endif
projects / oweals / u-boot.git / commitdiff