--- /dev/null
-#define GPIO_MAX 32
-#define GPIO_ALT1_SEL 0x40000000 /* GPIO_OUT value put in GPIO_TSx for the GPIO nb 0 */
-#define GPIO_ALT2_SEL 0x80000000 /* GPIO_OUT value put in GPIO_TSx for the GPIO nb 1 */
-#define GPIO_ALT3_SEL 0xC0000000 /* GPIO_OUT value put in GPIO_TSx for the GPIO nb 2 */
-#define GPIO_MASK 0xC0000000 /* GPIO_MASK */
-#define GPIO_IN_SEL 0x40000000 /* GPIO_IN value put in GPIO_ISx for the GPIO nb 0 */
- /* For the other GPIO number, you must shift */
-/*----------------------------------------------------------------------------+
-| Declare GPIO Configuration values
-+----------------------------------------------------------------------------*/
-typedef enum gpio_select { GPIO_SEL, GPIO_ALT1, GPIO_ALT2, GPIO_ALT3 } gpio_select_t;
-typedef enum gpio_driver { GPIO_DIS, GPIO_IN, GPIO_OUT, GPIO_BI } gpio_driver_t;
-
-typedef struct {
- unsigned long add; /* gpio core base address */
- gpio_driver_t in_out; /* Driver Setting */
- gpio_select_t alt_nb; /* Selected Alternate */
-} gpio_param_s;
-
+ /*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+ #ifndef __YUCCA_H_
+ #define __YUCCA_H_
+
+ #ifdef __cplusplus
+ extern "C" {
+ #endif
+
+ /*----------------------------------------------------------------------------+
+ | Defines
+ +----------------------------------------------------------------------------*/
+
+ #define TMR_FREQ_EXT 25000000
+ #define BOARD_UART_CLOCK 11059200
+
+ #define BOARD_OPTION_SELECTED 1
+ #define BOARD_OPTION_NOT_SELECTED 0
+
+ #define ENGINEERING_CLOCK_CHECKING "clk_chk"
+ #define ENGINEERING_EXTERNAL_CLOCK "ext_clk"
+
+ #define ENGINEERING_CLOCK_CHECKING_DATA 1
+ #define ENGINEERING_EXTERNAL_CLOCK_DATA 2
+
+ /* ethernet definition */
+ #define MAX_ENETMODE_PARM 3
+ #define ENETMODE_NEG 0
+ #define ENETMODE_SPEED 1
+ #define ENETMODE_DUPLEX 2
+
+ #define ENETMODE_AUTONEG 0
+ #define ENETMODE_NO_AUTONEG 1
+ #define ENETMODE_10 2
+ #define ENETMODE_100 3
+ #define ENETMODE_1000 4
+ #define ENETMODE_HALF 5
+ #define ENETMODE_FULL 6
+
+ #define NUM_TLB_ENTRIES 64
+
+ /*----------------------------------------------------------------------------+
+ | TLB specific defines.
+ +----------------------------------------------------------------------------*/
+ #define TLB_256MB_ALIGN_MASK 0xF0000000
+ #define TLB_16MB_ALIGN_MASK 0xFF000000
+ #define TLB_1MB_ALIGN_MASK 0xFFF00000
+ #define TLB_256KB_ALIGN_MASK 0xFFFC0000
+ #define TLB_64KB_ALIGN_MASK 0xFFFF0000
+ #define TLB_16KB_ALIGN_MASK 0xFFFFC000
+ #define TLB_4KB_ALIGN_MASK 0xFFFFF000
+ #define TLB_1KB_ALIGN_MASK 0xFFFFFC00
+ #define TLB_256MB_SIZE 0x10000000
+ #define TLB_16MB_SIZE 0x01000000
+ #define TLB_1MB_SIZE 0x00100000
+ #define TLB_256KB_SIZE 0x00040000
+ #define TLB_64KB_SIZE 0x00010000
+ #define TLB_16KB_SIZE 0x00004000
+ #define TLB_4KB_SIZE 0x00001000
+ #define TLB_1KB_SIZE 0x00000400
+
+ #define TLB_WORD0_EPN_MASK 0xFFFFFC00
+ #define TLB_WORD0_EPN_ENCODE(n) (((unsigned long)(n))&0xFFFFFC00)
+ #define TLB_WORD0_EPN_DECODE(n) (((unsigned long)(n))&0xFFFFFC00)
+ #define TLB_WORD0_V_MASK 0x00000200
+ #define TLB_WORD0_V_ENABLE 0x00000200
+ #define TLB_WORD0_V_DISABLE 0x00000000
+ #define TLB_WORD0_TS_MASK 0x00000100
+ #define TLB_WORD0_TS_1 0x00000100
+ #define TLB_WORD0_TS_0 0x00000000
+ #define TLB_WORD0_SIZE_MASK 0x000000F0
+ #define TLB_WORD0_SIZE_1KB 0x00000000
+ #define TLB_WORD0_SIZE_4KB 0x00000010
+ #define TLB_WORD0_SIZE_16KB 0x00000020
+ #define TLB_WORD0_SIZE_64KB 0x00000030
+ #define TLB_WORD0_SIZE_256KB 0x00000040
+ #define TLB_WORD0_SIZE_1MB 0x00000050
+ #define TLB_WORD0_SIZE_16MB 0x00000070
+ #define TLB_WORD0_SIZE_256MB 0x00000090
+ #define TLB_WORD0_TPAR_MASK 0x0000000F
+ #define TLB_WORD0_TPAR_ENCODE(n) ((((unsigned long)(n))&0x0F)<<0)
+ #define TLB_WORD0_TPAR_DECODE(n) ((((unsigned long)(n))>>0)&0x0F)
+
+ #define TLB_WORD1_RPN_MASK 0xFFFFFC00
+ #define TLB_WORD1_RPN_ENCODE(n) (((unsigned long)(n))&0xFFFFFC00)
+ #define TLB_WORD1_RPN_DECODE(n) (((unsigned long)(n))&0xFFFFFC00)
+ #define TLB_WORD1_PAR1_MASK 0x00000300
+ #define TLB_WORD1_PAR1_ENCODE(n) ((((unsigned long)(n))&0x03)<<8)
+ #define TLB_WORD1_PAR1_DECODE(n) ((((unsigned long)(n))>>8)&0x03)
+ #define TLB_WORD1_PAR1_0 0x00000000
+ #define TLB_WORD1_PAR1_1 0x00000100
+ #define TLB_WORD1_PAR1_2 0x00000200
+ #define TLB_WORD1_PAR1_3 0x00000300
+ #define TLB_WORD1_ERPN_MASK 0x0000000F
+ #define TLB_WORD1_ERPN_ENCODE(n) ((((unsigned long)(n))&0x0F)<<0)
+ #define TLB_WORD1_ERPN_DECODE(n) ((((unsigned long)(n))>>0)&0x0F)
+
+ #define TLB_WORD2_PAR2_MASK 0xC0000000
+ #define TLB_WORD2_PAR2_ENCODE(n) ((((unsigned long)(n))&0x03)<<30)
+ #define TLB_WORD2_PAR2_DECODE(n) ((((unsigned long)(n))>>30)&0x03)
+ #define TLB_WORD2_PAR2_0 0x00000000
+ #define TLB_WORD2_PAR2_1 0x40000000
+ #define TLB_WORD2_PAR2_2 0x80000000
+ #define TLB_WORD2_PAR2_3 0xC0000000
+ #define TLB_WORD2_U0_MASK 0x00008000
+ #define TLB_WORD2_U0_ENABLE 0x00008000
+ #define TLB_WORD2_U0_DISABLE 0x00000000
+ #define TLB_WORD2_U1_MASK 0x00004000
+ #define TLB_WORD2_U1_ENABLE 0x00004000
+ #define TLB_WORD2_U1_DISABLE 0x00000000
+ #define TLB_WORD2_U2_MASK 0x00002000
+ #define TLB_WORD2_U2_ENABLE 0x00002000
+ #define TLB_WORD2_U2_DISABLE 0x00000000
+ #define TLB_WORD2_U3_MASK 0x00001000
+ #define TLB_WORD2_U3_ENABLE 0x00001000
+ #define TLB_WORD2_U3_DISABLE 0x00000000
+ #define TLB_WORD2_W_MASK 0x00000800
+ #define TLB_WORD2_W_ENABLE 0x00000800
+ #define TLB_WORD2_W_DISABLE 0x00000000
+ #define TLB_WORD2_I_MASK 0x00000400
+ #define TLB_WORD2_I_ENABLE 0x00000400
+ #define TLB_WORD2_I_DISABLE 0x00000000
+ #define TLB_WORD2_M_MASK 0x00000200
+ #define TLB_WORD2_M_ENABLE 0x00000200
+ #define TLB_WORD2_M_DISABLE 0x00000000
+ #define TLB_WORD2_G_MASK 0x00000100
+ #define TLB_WORD2_G_ENABLE 0x00000100
+ #define TLB_WORD2_G_DISABLE 0x00000000
+ #define TLB_WORD2_E_MASK 0x00000080
+ #define TLB_WORD2_E_ENABLE 0x00000080
+ #define TLB_WORD2_E_DISABLE 0x00000000
+ #define TLB_WORD2_UX_MASK 0x00000020
+ #define TLB_WORD2_UX_ENABLE 0x00000020
+ #define TLB_WORD2_UX_DISABLE 0x00000000
+ #define TLB_WORD2_UW_MASK 0x00000010
+ #define TLB_WORD2_UW_ENABLE 0x00000010
+ #define TLB_WORD2_UW_DISABLE 0x00000000
+ #define TLB_WORD2_UR_MASK 0x00000008
+ #define TLB_WORD2_UR_ENABLE 0x00000008
+ #define TLB_WORD2_UR_DISABLE 0x00000000
+ #define TLB_WORD2_SX_MASK 0x00000004
+ #define TLB_WORD2_SX_ENABLE 0x00000004
+ #define TLB_WORD2_SX_DISABLE 0x00000000
+ #define TLB_WORD2_SW_MASK 0x00000002
+ #define TLB_WORD2_SW_ENABLE 0x00000002
+ #define TLB_WORD2_SW_DISABLE 0x00000000
+ #define TLB_WORD2_SR_MASK 0x00000001
+ #define TLB_WORD2_SR_ENABLE 0x00000001
+ #define TLB_WORD2_SR_DISABLE 0x00000000
+
+ /*----------------------------------------------------------------------------+
+ | Board specific defines.
+ +----------------------------------------------------------------------------*/
+ #define NONCACHE_MEMORY_SIZE (64*1024)
+ #define NONCACHE_AREA0_ENDOFFSET (64*1024)
+ #define NONCACHE_AREA1_ENDOFFSET (32*1024)
+
+ #define FLASH_SECTORSIZE 0x00010000
+
+ /* SDRAM MICRON */
+ #define SDRAM_MICRON 0x2C
+
+ #define SDRAM_TRUE 1
+ #define SDRAM_FALSE 0
+ #define SDRAM_DDR1 1
+ #define SDRAM_DDR2 2
+ #define SDRAM_NONE 0
+ #define MAXDIMMS 2 /* Changes le 12/01/05 pour 1.6 */
+ #define MAXRANKS 4 /* Changes le 12/01/05 pour 1.6 */
+ #define MAXBANKSPERDIMM 2
+ #define MAXRANKSPERDIMM 2
+ #define MAXBXCF 4 /* Changes le 12/01/05 pour 1.6 */
+ #define MAXSDRAMMEMORY 0xFFFFFFFF /* 4GB */
+ #define ERROR_STR_LENGTH 256
+ #define MAX_SPD_BYTES 256 /* Max number of bytes on the DIMM's SPD EEPROM */
+
+ /*----------------------------------------------------------------------------+
+ | SDR Configuration registers
+ +----------------------------------------------------------------------------*/
+ /* Serial Device Strap Reg 0 */
+ #define sdr_pstrp0 0x0040
+
+ #define SDR0_SDSTP1_EBC_ROM_BS_MASK 0x00000080 /* EBC Boot bus width Mask */
+ #define SDR0_SDSTP1_EBC_ROM_BS_16BIT 0x00000080 /* EBC 16 Bits */
+ #define SDR0_SDSTP1_EBC_ROM_BS_8BIT 0x00000000 /* EBC 8 Bits */
+
+ #define SDR0_SDSTP1_BOOT_SEL_MASK 0x00080000 /* Boot device Selection Mask */
+ #define SDR0_SDSTP1_BOOT_SEL_EBC 0x00000000 /* EBC */
+ #define SDR0_SDSTP1_BOOT_SEL_PCI 0x00080000 /* PCI */
+
+ #define SDR0_SDSTP1_EBC_SIZE_MASK 0x00000060 /* Boot rom size Mask */
+ #define SDR0_SDSTP1_BOOT_SIZE_16MB 0x00000060 /* 16 MB */
+ #define SDR0_SDSTP1_BOOT_SIZE_8MB 0x00000040 /* 8 MB */
+ #define SDR0_SDSTP1_BOOT_SIZE_4MB 0x00000020 /* 4 MB */
+ #define SDR0_SDSTP1_BOOT_SIZE_2MB 0x00000000 /* 2 MB */
+
+ /* Serial Device Enabled - Addr = 0xA8 */
+ #define SDR0_PSTRP0_BOOTSTRAP_IIC_A8_EN SDR0_PSTRP0_BOOTSTRAP_SETTINGS5
+ /* Serial Device Enabled - Addr = 0xA4 */
+ #define SDR0_PSTRP0_BOOTSTRAP_IIC_A4_EN SDR0_PSTRP0_BOOTSTRAP_SETTINGS7
+
+ /* Pin Straps Reg */
+ #define SDR0_PSTRP0 0x0040
+ #define SDR0_PSTRP0_BOOTSTRAP_MASK 0xE0000000 /* Strap Bits */
+
+ #define SDR0_PSTRP0_BOOTSTRAP_SETTINGS0 0x00000000 /* Default strap settings 0 */
+ #define SDR0_PSTRP0_BOOTSTRAP_SETTINGS1 0x20000000 /* Default strap settings 1 */
+ #define SDR0_PSTRP0_BOOTSTRAP_SETTINGS2 0x40000000 /* Default strap settings 2 */
+ #define SDR0_PSTRP0_BOOTSTRAP_SETTINGS3 0x60000000 /* Default strap settings 3 */
+ #define SDR0_PSTRP0_BOOTSTRAP_SETTINGS4 0x80000000 /* Default strap settings 4 */
+ #define SDR0_PSTRP0_BOOTSTRAP_SETTINGS5 0xA0000000 /* Default strap settings 5 */
+ #define SDR0_PSTRP0_BOOTSTRAP_SETTINGS6 0xC0000000 /* Default strap settings 6 */
+ #define SDR0_PSTRP0_BOOTSTRAP_SETTINGS7 0xE0000000 /* Default strap settings 7 */
+
+ /* fpgareg - defines are in include/config/YUCCA.h */
+
+ #define SDR0_CUST0_ENET3_MASK 0x00000080
+ #define SDR0_CUST0_ENET3_COPPER 0x00000000
+ #define SDR0_CUST0_ENET3_FIBER 0x00000080
+ #define SDR0_CUST0_RGMII3_MASK 0x00000070
+ #define SDR0_CUST0_RGMII3_ENCODE(n) ((((unsigned long)(n))&0x7)<<4)
+ #define SDR0_CUST0_RGMII3_DECODE(n) ((((unsigned long)(n))>>4)&0x07)
+ #define SDR0_CUST0_RGMII3_DISAB 0x00000000
+ #define SDR0_CUST0_RGMII3_RTBI 0x00000040
+ #define SDR0_CUST0_RGMII3_RGMII 0x00000050
+ #define SDR0_CUST0_RGMII3_TBI 0x00000060
+ #define SDR0_CUST0_RGMII3_GMII 0x00000070
+ #define SDR0_CUST0_ENET2_MASK 0x00000008
+ #define SDR0_CUST0_ENET2_COPPER 0x00000000
+ #define SDR0_CUST0_ENET2_FIBER 0x00000008
+ #define SDR0_CUST0_RGMII2_MASK 0x00000007
+ #define SDR0_CUST0_RGMII2_ENCODE(n) ((((unsigned long)(n))&0x7)<<0)
+ #define SDR0_CUST0_RGMII2_DECODE(n) ((((unsigned long)(n))>>0)&0x07)
+ #define SDR0_CUST0_RGMII2_DISAB 0x00000000
+ #define SDR0_CUST0_RGMII2_RTBI 0x00000004
+ #define SDR0_CUST0_RGMII2_RGMII 0x00000005
+ #define SDR0_CUST0_RGMII2_TBI 0x00000006
+ #define SDR0_CUST0_RGMII2_GMII 0x00000007
+
+ #define ONE_MILLION 1000000
+ #define ONE_BILLION 1000000000
+
+ /*----------------------------------------------------------------------------+
+ | X
+ | XX
+ | XX XXX XXXXX XX XXX XXXXX
+ | XX XX X XXX XX XX
+ | XX XX XXXXXX XX XX
+ | XX XX X XX XX XX XX
+ | XXX XX XXXXX X XXXX XXX
+ +----------------------------------------------------------------------------*/
+ /*----------------------------------------------------------------------------+
+ | Declare Configuration values
+ +----------------------------------------------------------------------------*/
+
+ typedef enum config_selection {
+ CONFIG_NOT_SELECTED,
+ CONFIG_SELECTED
+ } config_selection_t;
+
+ typedef enum config_list {
+ UART2_IN_SERVICE_MODE,
+ CPU_TRACE_MODE,
+ UART1_CTS_RTS,
+ CONFIG_NB
+ } config_list_t;
+
+ #define MAX_CONFIG_SELECT_NB 3
+
+ #define BOARD_INFO_UART2_IN_SERVICE_MODE 1
+ #define BOARD_INFO_CPU_TRACE_MODE 2
+ #define BOARD_INFO_UART1_CTS_RTS_MODE 4
+
+ void force_bup_config_selection(config_selection_t *confgi_select_P);
+ void update_config_selection_table(config_selection_t *config_select_P);
+ void display_config_selection(config_selection_t *config_select_P);
+
+ /*----------------------------------------------------------------------------+
+ | XX
+ |
+ | XXXX XX XXX XXX XXXX
+ | XX XX XX XX XX XX
+ | XX XXX XX XX XX XX XX
+ | XX XX XXXXX XX XX XX
+ | XXXX XX XXXX XXXX
+ | XXXX
+ |
+ |
+ |
+ | +------------------------------------------------------------------+
+ | | GPIO/Secondary func | Primary Function | I/O | Alternate1 | I/O |
+ | +----------------------+------------------+-----+------------+-----+
+ | | | | | | |
+ | | GPIO0_0 | PCIX0REQ2_N | I/O | TRCCLK | |
+ | | GPIO0_1 | PCIX0REQ3_N | I/O | TRCBS0 | |
+ | | GPIO0_2 | PCIX0GNT2_N | I/O | TRCBS1 | |
+ | | GPIO0_3 | PCIX0GNT3_N | I/O | TRCBS2 | |
+ | | GPIO0_4 | PCIX1REQ2_N | I/O | TRCES0 | |
+ | | GPIO0_5 | PCIX1REQ3_N | I/O | TRCES1 | |
+ | | GPIO0_6 | PCIX1GNT2_N | I/O | TRCES2 | NA |
+ | | GPIO0_7 | PCIX1GNT3_N | I/O | TRCES3 | NA |
+ | | GPIO0_8 | PERREADY | I | TRCES4 | NA |
+ | | GPIO0_9 | PERCS1_N | O | TRCTS0 | NA |
+ | | GPIO0_10 | PERCS2_N | O | TRCTS1 | NA |
+ | | GPIO0_11 | IRQ0 | I | TRCTS2 | NA |
+ | | GPIO0_12 | IRQ1 | I | TRCTS3 | NA |
+ | | GPIO0_13 | IRQ2 | I | TRCTS4 | NA |
+ | | GPIO0_14 | IRQ3 | I | TRCTS5 | NA |
+ | | GPIO0_15 | IRQ4 | I | TRCTS6 | NA |
+ | | GPIO0_16 | IRQ5 | I | UART2RX | I |
+ | | GPIO0_17 | PERBE0_N | O | UART2TX | O |
+ | | GPIO0_18 | PCI0GNT0_N | I/O | NA | NA |
+ | | GPIO0_19 | PCI0GNT1_N | I/O | NA | NA |
+ | | GPIO0_20 | PCI0REQ0_N | I/O | NA | NA |
+ | | GPIO0_21 | PCI0REQ1_N | I/O | NA | NA |
+ | | GPIO0_22 | PCI1GNT0_N | I/O | NA | NA |
+ | | GPIO0_23 | PCI1GNT1_N | I/O | NA | NA |
+ | | GPIO0_24 | PCI1REQ0_N | I/O | NA | NA |
+ | | GPIO0_25 | PCI1REQ1_N | I/O | NA | NA |
+ | | GPIO0_26 | PCI2GNT0_N | I/O | NA | NA |
+ | | GPIO0_27 | PCI2GNT1_N | I/O | NA | NA |
+ | | GPIO0_28 | PCI2REQ0_N | I/O | NA | NA |
+ | | GPIO0_29 | PCI2REQ1_N | I/O | NA | NA |
+ | | GPIO0_30 | UART1RX | I | NA | NA |
+ | | GPIO0_31 | UART1TX | O | NA | NA |
+ | | | | | | |
+ | +----------------------+------------------+-----+------------+-----+
+ |
+ +----------------------------------------------------------------------------*/
+
+ unsigned long auto_calc_speed(void);
+ /*----------------------------------------------------------------------------+
+ | Prototypes
+ +----------------------------------------------------------------------------*/
+ void print_evb440spe_info(void);
+
+ int onboard_pci_arbiter_selected(int core_pci);
+
+ #ifdef __cplusplus
+ }
+ #endif
+ #endif /* __YUCCA_H_ */
projects / oweals / u-boot.git / commitdiff